Search

Paper documents are an important carrier of information related to human civilization, with the reinforcement and protection of fragile paper documents being a key aspect of their protection. This research utilized amphoteric polyvinylamine polymer as a paper reinforcement agent, strengthening the Xuan paper commonly used in paper documents. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), solid-state 13C NMR, and other analytical methods were employed to compare the physical properties, micro-morphology, crystallinity, and aging resistance of the paper before and after reinforcement. Research was conducted on the effects of reinforcement, the aging resistance, and the effects on the fiber structure. The results indicate that polyethylenimine has a filling and bridging effect between the paper fibers. After treatment with polyethylenimine, there was a significant improvement in the folding endurance and tensile strength of the paper. Additionally, the paper maintains a good mechanical strength even after undergoing dry heat and humid aging.

Flexible paper-based force sensors have garnered significant attention for their important potential applications in healthcare wearables, portable electronics, etc. However, most studies have only used paper as the flexible substrate for sensors, not fully exploiting the potential of paper’s micro-nanostructure for sensing. This article proposes a novel approach where paper serves both as the sensitive element and the flexible substrate of force sensors. Under external mechanical forces, the micro-nanostructure of the conductive-treated paper will change, leading to significant changes in the related electrical output and thus enabling sensing. To demonstrate the feasibility and universality of this new method, the article takes paper-based capacitive pressure sensors and paper-based resistive strain sensors as examples, detailing their fabrication processes, constructing sensing principle models based on the micro-nanostructure of paper materials, and testing their main sensing performance. For the capacitive paper-based pressure sensor, it achieves a high sensitivity of 1.623 kPa−1, a fast response time of 240 ms, and a minimum pressure resolution of 4.1 Pa. As for the resistive paper-based strain sensor, it achieves a high sensitivity of 72 and a fast response time of 300 ms. The proposed new method offers advantages such as high sensitivity, simplicity in the fabrication process, environmental friendliness, and cost-effectiveness, providing new insights into the research of flexible force sensors.

This paper presents the results of research on the impact of graphene paper on selected bacterial strains. Graphene oxide, from which graphene paper is made, has mainly bacteriostatic properties. Therefore, the main goal of this research was to determine the possibility of using graphene paper as a carrier of a medicinal substance. Studies of the degree of bacterial inhibition were performed on Staphylococcus aureus and Pseudomonas aeruginosa strains. Graphene paper was analyzed not only in the state of delivery but also after the incorporation of the antibiotics ciprofloxacin, cefazolin, and methicillin into its structures. In addition, Fourier-Transform Infrared Spectroscopy, contact angle, and microscopic analysis of bacteria on the surface of the examined graphene paper samples were also performed. Studies have shown that graphene paper with built-in ciprofloxacin had a bactericidal effect on the strains of Staphylococcus aureus and Pseudomonas aeruginosa. In contrast, methicillin, as well as cefazolin, deposited on graphene paper acted mainly locally. Studies have shown that graphene paper can be used as a carrier of selected medicinal substances.

This research explores the potential of ionic liquids (ILs) in restoring paper artifacts, particularly an aged book sample. Three distinct ILs—1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, 1-methyl-3-pentylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-methyl-3-heptylimidazolium bis(trifluoromethylsulfonyl)imide —both in their pure form and isopropanol mixtures, were examined for their specific consumption in conjunction with paper, with 1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide displaying the highest absorption. Notably, the methyl-3-heptylimidazolium ionic liquid displayed pronounced deacidification capabilities, elevating the paper pH close to a neutral 7. The treated paper exhibited significant color enhancements, particularly with 1-heptyl-3-methylimidazolium and 1-pentyl-3-methylimidazolium ILs, as evidenced by CIE-Lab* parameters. An exploration of ILs as potential UV stabilizers for paper unveiled promising outcomes, with 1-heptyl-3-methylimidazolium IL demonstrating minimal yellowing post-UV irradiation. FTIR spectra elucidated structural alterations, underscoring the efficacy of ILs in removing small-molecular additives and macromolecules. The study also addressed the preservation of inked artifacts during cleaning, showcasing ILs’ ability to solubilize iron gall ink, particularly the one with the 1-ethyl-3-propylimidazolium cation. While exercising caution for prolonged use on inked supports is still recommended, ILs are shown here to be valuable for cleaning ink-stained surfaces, establishing their effectiveness in paper restoration and cultural heritage preservation.

This paper discusses the results of the micro-Raman analysis performed on paper-like graphene oxide (GO) samples consisting of many functionalised graphene layers and annealed at moderate temperatures (≤500 °C) under vacuum conditions (p ≃ 10−4 mbar). The analysis of the standalone samples revealed that the obtained material is characterised by a noticeable disorder level but still stays below the commonly accepted threshold of high or total disorder. GO formed in a simple way showed two spectral bands above 1650 cm−1 recorded very rarely or not at all and their origin has been discussed in detail. The results also confirmed the metastable character of multilayer GO after the annealing process at moderate temperatures as the C/O ratio was kept between 2 and 3 and the spectral features were stable within the annealing temperature range.

Green and sustainable power sources for next-generation electronics are being developed. A cellulose paper-based triboelectric nanogenerator (TENG) was fabricated to harness mechanical energy and convert it into electricity. This work proposes a novel approach to modify cellulose paper with natural dyes, including chlorophyll from spinach, anthocyanin from red cabbage, and curcumin from turmeric, to enhance the power output of a TENG. All the natural dyes are found to effectively improve the energy conversion performance of a cellulose paper-based TENG due to their photogenerated charges. The highest power density of 3.3 W/m2 is achieved from the cellulose paper-based TENG modified with chlorophyll, which is higher than those modified with anthocyanin and curcumin, respectively. The superior performance is attributed not only to the photosensitizer properties but also the molecular structure of the dye that promotes the electron-donating properties of cellulose.

In the late Qing Dynasty, religious periodicals by Western missionaries were made legal in China, and subsequently became an important manner of their missionary cause. Among them, Child’s Paper 小孩月报 (1875–1881) by John Marshall Willoughby Farnham, a Protestant missionary from the United States, endeavoured to convert child readers by carrying children’s stories of moral and emotional education. By concentrating on the educational elements of Child’s Paper, this article inspects how conversion was achieved via the intertextual interpretation of Christian doctrines within these educational elements. Specifically, how the image of little Christians and urchins, respectively, represents salvation and redemption in Christian morals. This article holds that the missionaries’ stress on the authority of Christian discourse in the education of Chinese children makes evident an increasing emphasis on the reformative effects of Christianity on Chinese children. Moreover, the conversion-education efforts by missionaries also construed helping Chinese children gain a cross-cultural perspective on Western religion, and arguably inspired later Chinese intellectuals’ to create newspapers for the purpose of the pre-primary education of Chinese children.

This article introduces the concept of ecological costs associated with the waste paper recycling system. The costs associated with this process include resource consumption, waste emissions, ecological damage, and production processes. To analyze the ecological costs of deviations from the baseline material flow in a waste paper recycling system, a benchmark material flow diagram is constructed using the material flow analysis method. The diagram illustrates a fully closed one-way material flow of the recycling system, which is highly abstracted and simplified. The study analyzed the ecological costs of the benchmark material flow and the impact of deviations from it. The results suggest that the circulation of materials within and between processes increases the ecological cost of the waste paper recycling system. Furthermore, the release of materials from a process into the environment also contributes to its ecological impact. However, the introduction of external materials into the recycling system can reduce its ecological impact, particularly if these materials are recycled resources. The study emphasizes the significance of considering ecological costs in waste paper recycling systems to minimize their environmental impact.

In this research, the decomposition of toxic organics from pulp and paper mill effluent by the sequential application of ozonation and biodegradation was studied. Ozonation, as a pre-treatment, was executed to transform the initial pollutants into less toxic compounds (such as organic acids of low molecular weights). Biodegradation was executed during three days with acclimated microorganisms that were able to complete the decomposition of the initial organic mixture (raw wastewater) and to achieve a higher degree of mineralization (85–90%). Experiments were performed under three different conditions: (a) only ozonation of the initial contaminants, (b) only biodegradation of residual water without previous treatment by ozone and (c) ozonation followed by biodegradation performed by acclimated microorganisms. In the case of 72 h of biodegradation, the mineralization efficiency reached 85% and 89% after 30 and 60 min of ozonation, respectively. The no significant difference in this parameter coincided with the calculated generalized microorganisms’ consortia specific growing rate μmax that was reduced from 2.08 × 10−3 h−1 to 6.05 × 10−4 h−1 when the ozonation time was longer. The identification of the organics composition by gas chromatography with mass detector (GC-MS) before and after treatments confirmed that the proposed combined process served as a more efficient alternative to secondary and tertiary treatments (mineralization degree between 60 and 80% in average) of the paper industry wastewater.

Invasive alien plant species (IAPS) may cause threats to native biodiversity in ecosystems. Researchers have been investigating all the possible ways that they can be used effectively for other purposes. Since IAPS are capable of forming cellulose fibre nets, in this research, papers were made from three different types of IAPS (Japanese knotweed, giant goldenrod, and black locust). This research examined these IAPS papers and their effectiveness when used as printing substrates. In comparison to commercial office paper, the differences in basic, surface, optical, and microscopic properties were measured. As a widely used technology, inkjet printing was applied. We tested a commonly used sans-serif typeface (which has been established as being more legible than other typefaces in previous research) in three different type sizes (i.e., 8, 10, and 12 pt). According to the results, paper made from IAPS could offer some usable properties and acceptable legibility, especially when printing typefaces with specific attributes, such as moderate counter size, higher x-height, and minimal differences in the letter stroke width, are used. An appropriate typographic tonal density should be achieved in combination with an adequate letter size, e.g., 10 pt type size when a sans-serif typeface is used.

Some wastes from the paper pulp production process are still sent to a controlled waste landfill. These materials can constitute alternative resources for constructing road pavements. The study aimed to characterize and explore the sustainable application of two inorganic wastes resulting from the paper pulp process, the dregs (green liquor wastes) and the grits (slaker wastes), in the production of bituminous mixtures by the analysis of samples prepared with 5 and 10% of dregs and 5 and 10% of grits on the baseline reference bituminous mixture AC 14 surf 35/50. Some relevant mechanical properties of the blends were assessed based on Marshall compression, sensitivity to water and wheel-tracking tests. Additionally, water poured on the loose asphalt and compacted slabs’ surface was analysed to determine the portion of harmful chemical compounds leached from the asphalt material. The results show that using dregs presented some technical limitations related to mechanical performance and that the incorporation of grits has an acceptable mechanical behaviour. Moreover, the study shows that the measured leachate resulting from water flow in a reference asphalt mixture and the blends with grits are insignificant. It can be concluded that using grits in asphalt mixtures is a promising technique regarding mechanical behaviour and environmental impacts that need further studies.

This study presents an integrated approach to understanding fluid dynamics in Microfluidic Paper-Based Analytical Devices (µPADs), combining empirical investigations with advanced numerical modeling. Paper-based devices are recognized for their low cost, portability, and simplicity and are increasingly applied in health, environmental monitoring, and food quality analysis. However, challenges such as lack of flow control and the need for advanced detection methods have limited their widespread adoption. To address these challenges, our study introduces a novel numerical model that incorporates factors such as pore size, fiber orientation, and porosity, thus providing a comprehensive understanding of fluid dynamics across various saturation levels of paper. Empirical results focused on observing the wetted length in saturated paper substrates. The numerical model, integrating the Highly Simplified Marker and Cell (HSMAC) method and the High Order accuracy scheme Reducing Numerical Error Terms (HORNET) scheme, successfully predicts fluid flow in scenarios challenging for empirical observation, especially at high saturation levels. The model effectively mimicked the Lucas–Washburn relation for dry paper and demonstrated the increasing time requirement for fluid movement with rising saturation levels. It also accurately predicted faster fluid flow in Whatman Grade 4 filter paper compared with Grade 41 due to its larger pore size and forecasted an increased flow rate in the machine direction fiber orientation of Whatman Grade 4. These findings have significant implications for the design and application of µPADs, emphasizing the need for precise control of fluid flow and the consideration of substrate microstructural properties. The study’s combination of empirical data and advanced numerical modeling marks a considerable advancement in paper-based microfluidics, offering robust frameworks for future development and optimization of paper-based assays.

Livestock dung, discarded crop straws, and residual plastic film are the primary agricultural non-point sources of pollution. For livestock dung and discarded crop straw, the general treatment focuses on compost, animal fodder, industrial raw material, and new energy. The development of degradable mulch film is the main way to solve pollution from residual plastic film. However, an effective way to solve the above three types of pollution simultaneously and use them for ecological circular agriculture has been less studied. In this study, using cow dung and flax straw wastes as raw materials, we prepared natural, fibre-based paper mulch using the rapid-Kothen method and analysed the film-forming mechanism. Based on the Van Soest method, the cow dung and flax straw waste contain abundant cellulose fibres: 36.75% and 54.69%, respectively. The tensile strength and tear strength of fibre paper mulch are 1.87 kN/m and 19.91 N/mm, respectively. To enhance the adaptability of the fibre paper mulch in humid environments, the surface of the mulch was treated with alkyl ketene dimer (AKD). The AKD-coated fibre paper mulch displays hydrophobic properties, indicated by a contact angle of 128° ± 2°. It has a wet tensile strength of 0.64 kN/m and a wet tear strength of 8.23 N/mm. Additionally, it exhibits a dry tensile strength and a tear strength of 2.13 kN/m and 16.43 N/mm, respectively. Notably, the dry tensile strength is increased by 16.31%. In this way, the livestock dung and discarded crop straw can be reused, reducing dung pollution and straw burning in livestock farms, and the final products can alleviate the residual film pollution simultaneously.

There have been few investigations into the health benefits and meat quality of supplementing Yangzhou geese with paper mulberry silage. One hundred and twenty 28-day-old Yangzhou geese were selected for the experiment and randomly divided into two groups: a control group (CON) and a paper mulberry silage group (PM), with six replicates in each group. The experiment lasted for a total of 6 weeks. The experiment found that compared with CON, PM had a promoting effect on the average daily weight gain of Yangzhou geese (p = 0.056). Sensory and nutritional analysis of breast muscles revealed a decrease in a* value (p < 0.05) and an increase in protein content (p < 0.05) following PM treatment. Through untargeted metabolomics analysis of breast muscle samples, it was found that 11 different metabolites, including guanidinoacetic acid and other substances, had a positive effect on amino acid metabolism and lipid antioxidant pathways of PM treatment. Overall, the strategy of feeding Yangzhou geese with paper mulberry silage is feasible, which can improve the sensory quality and nutritional value of goose meat. The experiment provides basic data for the application form of goose breeding, so exploring the impact of substances within paper mulberry on goose meat should be focused on in the future.

This review explores circular economy principles in regard to ethanol production from paper-mill sludge. Environmental sustainability and renewability over fossil fuels make second generation ethanol an attractive energy source in a rapidly growing population and consumption world. Paper sludge (PS), a by-product of the pulp and paper (P&P) industry, can no longer be recycled for paper production and is mainly disposed of in landfills. Therefore, it poses a major environmental challenge. However, it has shown potential as a valuable raw material for ethanol production, along with other pulp and paper products, due to its abundant availability and high cellulosic content. This waste-to-energy (WtE) technology for ethanol production is proposed as an alternative, aligning with circular economy concepts to maximize resource efficiency and minimize waste. This review underlines the circular economy aspects of bioethanol production within paper mill sludge management systems. Circular economy principles applied to ethanol production from PS offer a promising avenue for sustainable biofuel development that not only addresses waste management challenges but also enhances the overall environmental performance of biofuel production. Furthermore, economic benefits are described, highlighting the potential for job creation and community development.

Melamine-impregnated paper waste (MIPW) is an unavoidable byproduct of the melamine-impregnated paper production process, and it must be urgently disposed. In this paper, due to its high N content, MIPW was used as a N source to co-pyrolyze with camellia oleifera shell (COS). By changing the proportion of MIPW in the raw materials, the migration path of the N was studied during the co-pyrolysis process. X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), total nitrogen analysis (TN) and ultraviolet spectrophotometry were used to determine the content and the types of N-containing components in raw materials and products. The results showed that during the co-pyrolysis process, the N in MIPW and COS would be converted into different types of N-containing components, and the proportion of MIPW in raw materials directly impacts the product distribution and the N migration path. With the increase in the proportion of MIPW from 10 to 50 wt.% (daf, mass ratio), the proportion of N in raw materials that migrated into the solid phase decreased from 27.58 to 16.31 wt.%, while that which migrated to the gas and liquid phases increased from 24.92 and 47.50 wt.% to 25.97 and 57.72 wt.%, respectively. The proportions of N in the raw materials that changed into pyridinic-N, pyrrolic-N and graphitic-N in the solid phase and N2-N in the gas phase were decreased. The proportions of NH3-N and HCN-N in the gas phase and NH3-N and organic-N in the liquid phase were increased. Moreover, synergies were observed during the co-pyrolysis process, which affected the N migration path in the raw material. This study will provide policy directions and theoretical support for the comprehensive utilization of MIPW and COS.

This study evaluates the practical feasibility of using powdered cellulose microblasting for dry cleaning paper-based printed artworks in a real setting of conservation treatment. The control parameters used for this purpose are the potential morphological changes in the surface, the level of cleanliness achieved, and the amount of residue remaining in the artwork after the treatment. In this study, cleaning of a lithography was conducted entirely with powdered cellulose microblasting. The outcomes were evaluated before and after treatment using optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and spectrophotometry. The results indicate that powdered cellulose microblasting is a feasible and efficient technique for conducting the dry cleaning of printed works on paper without causing morphological changes to their surface. Additionally, it offers significant benefits by enabling precise treatment control, reducing cleaning time, and using materials stable in the long term and compatible with the substrate. Moreover, it mitigates the long-term negative effects caused by synthetic polymer residues from the cleaning materials commonly used in the dry cleaning of paper.

Signal readout technologies that do not require any instrument are essential for improving the convenience and availability of paper-based sensors. Thanks to the remarkable progress in material science and nanotechnology, paper-based sensors with instrument-free signal readout have been developed for multiple purposes, such as biomedical detection, environmental pollutant tracking, and food analysis. In this review, the developments in instrument-free signal readout technologies for paper-based sensors from 2020 to 2023 are summarized. The instrument-free signal readout technologies, such as distance-based signal readout technology, counting-based signal readout technology, text-based signal readout technology, as well as other transduction technologies, are briefly introduced, respectively. On the other hand, the applications of paper-based sensors with instrument-free signal readout technologies are summarized, including biomedical analysis, environmental analysis, food analysis, and other applications. Finally, the potential and difficulties associated with the advancement of paper-based sensors without instruments are discussed.

Nowadays, mycotoxin contamination in cereals and wastewater exposes a safety hazard to consumer health. This work describes the design of a simple, low-cost, and sensitive origami microfluidic paper-based device using electrochemical detection for zearalenone determination. The microfluidic immunosensor was designed on a paper platform by a wax printing process. The graphitized carbon working electrode modified with carbon nanohorns-decorated nanoporous gold showed a higher surface area, sensitivity, and adequate analytical performance. Electrodes were characterized by scanning electron microscopy, energy-dispersive spectroscopy, and cyclic voltammetry. The determination of zearalenone was carried out through a competitive immunoassay using specific antibodies immobilized by a covalent bond on the electrode surface. In the presence of HRP-labeled enzyme conjugate, substrate, and catechol, zearalenone was detected employing the developed immunosensor by applying −0.1 V to the working electrode vs silver as a pseudo-reference electrode. A calibration curve with a linear range between 10 and 1000 µg Kg−1 (R2 = 0.998) was obtained, and the limit of detection and quantification for the electrochemical immunosensor were 4.40 and 14.90 µg Kg−1, respectively. The coefficient of variation for intra- and inter-day assays was less than 5%. The selectivity and specificity of the sensor were evaluated, comparing the response against zearalenone metabolites and other mycotoxins that could affect the corn samples. Therefore, origami is a promising approach for paper-based electrochemical microfluidic sensors coupled to smartphones as a rapid and portable tool for in situ mycotoxins detection in real samples.