Search

The delineation of management zones is one of the ways to enable the spatially differentiated management of plots using precision agriculture tools. Over the years, the spatial variability of data collected from soil and plant sampling started to be replaced by data collected by proximal and orbital sensors. As a result, the variety and volume of data have increased considerably, making it necessary to use advanced computational tools, such as machine learning, for data analysis and decision-making support. This paper presents a methodology used to establish management zones (MZ) in precision agriculture by analyzing data obtained from soil sampling, proximal sensors and orbital sensors, in experiments carried out in four plots featuring soybean–cotton and soybean–corn crops, in Mato Grosso and Paraná states, Brazil. Four procedures were evaluated, using different input data sets for the MZ delineation: (I) soil attributes, including clay content, apparent electrical conductivity or fertility, along with elevation, yield maps and vegetation indices (VIs) captured during the peak crop biomass period; (II) soil attributes in conjunction with VIs demonstrating strong correlations; (III) solely VIs exhibiting robust correlation with soil attributes and yield; (IV) VIs selected via random forests to identify the importance of the variable for estimating yield. The results showed that the VIs derived from satellite images could effectively replace other types of data. For plots where the natural spatial variability can be easily identified, all procedures favor obtaining MZ maps that allow reductions of 40% to 70% in yield variance, justifying their use. On the other hand, in plots with low natural spatial variability and that do not have reliable yield maps, different data sets used as input do not help in obtaining feasible MZ maps. For areas where anthropogenic activities with spatially differentiated treatment are already present, the exclusive use of VIs for the delineation of MZs must be carried out with reservations. [ABSTRACT FROM AUTHOR]

Mineral prospectivity mapping (MPM), like other geoscience fields, is subject to a variety of uncertainties. When data about unfavorable sites to find deposits (i.e., drill intersections to barren rocks) is lacking in MPM using machine learning (ML) methods, the synthetic generation of negative datasets is required. As a result, techniques for selecting point locations to represent negative examples must be employed. Several approaches have been proposed in the past; however, one can never be certain that the points chosen are true negatives or, at the very least, optimal for training. As a consequence, methodologies that account for the uncertainty of the generation of negative datasets in MPM are needed. In this paper, we compare two criteria for selecting negative examples and quantify the uncertainty associated with this process by generating 400 potential maps for each of the three ML methods utilized (200 maps for each criterion), which include random forest (RF), support vector machine (SVM), and k-nearest neighbors (KNC). The results showed that applying a geological constraint to the creation of negative datasets reduced prediction uncertainty and improved overall model performance but produced larger areas of very high probability (i.e., >0.9) when compared to using only the spatial distribution of known deposits and occurrences as a constraint. SHAP values were used to find approximations for the importance of features in nonlinear methods, and kernel density estimations were used to examine how they varied depending on the negative dataset used to train the ML models. Prospectivity models for magmatic-hydrothermal gold deposits were generated using data from the shuttle radar terrain mission, gamma-ray, magnetic lineaments, and proximity to dykes. The Juruena Mineral Province, situated in Northern Mato Grosso, Brazil, represented the case study for this work. [ABSTRACT FROM AUTHOR]

Solar irradiance forecasting has been an essential topic in renewable energy generation. Forecasting is an important task because it can improve the planning and operation of photovoltaic systems, resulting in economic advantages. Traditionally, single models are employed in this task. However, issues regarding the selection of an inappropriate model, misspecification, or the presence of random fluctuations in the solar irradiance series can result in this approach underperforming. This paper proposes a heterogeneous ensemble dynamic selection model, named HetDS, to forecast solar irradiance. For each unseen test pattern, HetDS chooses the most suitable forecasting model based on a pool of seven well-known literature methods: ARIMA, support vector regression (SVR), multilayer perceptron neural network (MLP), extreme learning machine (ELM), deep belief network (DBN), random forest (RF), and gradient boosting (GB). The experimental evaluation was performed with four data sets of hourly solar irradiance measurements in Brazil. The proposed model attained an overall accuracy that is superior to the single models in terms of five well-known error metrics. [ABSTRACT FROM AUTHOR]

Making plant breeding programs less expensive, fast, practical, and accurate, especially for soybeans, promotes the selection of new soybean genotypes and contributes to the emergence of new varieties that are more efficient in absorbing and metabolizing nutrients. Using spectral information from soybean genotypes combined with nutritional information on secondary macronutrients can help genetic improvement programs select populations that are efficient in absorbing and metabolizing these nutrients. In addition, using machine learning algorithms to process this information makes the acquisition of superior genotypes more accurate. Therefore, the objective of the work was to verify the classification performance of soybean genotypes regarding secondary macronutrients by ML algorithms and different inputs. The experiment was conducted in the experimental area of the Federal University of Mato Grosso do Sul, municipality of Chapadão do Sul, Brazil. Soybean was sown in the 2019/20 crop season, with the planting of 103 F2 soybean populations. The experimental design used was randomized blocks, with two replications. At 60 days after crop emergence (DAE), spectral images were collected with a Sensifly eBee RTK fixed-wing remotely piloted aircraft (RPA), with autonomous takeoff control, flight plan, and landing. At the reproductive stage (R1), three leaves were collected per plant to determine the macronutrients calcium (Ca), magnesium (Mg), and sulfur (S) levels. The data obtained from the spectral information and the nutritional values of the genotypes in relation to Ca, Mg, and S were subjected to a Pearson correlation analysis; a PC analysis was carried out with a k-means algorithm to divide the genotypes into clusters. The clusters were taken as output variables, while the spectral data were used as input variables for the classification models in the machine learning analyses. The configurations tested in the models were spectral bands (SBs), vegetation indices (VIs), and a combination of both. The combination of machine learning algorithms with spectral data can provide important biological information about soybean plants. The classification of soybean genotypes according to calcium, magnesium, and sulfur content can maximize time, effort, and labor in field evaluations in genetic improvement programs. Therefore, the use of spectral bands as input data in random forest algorithms makes the process of classifying soybean genotypes in terms of secondary macronutrients efficient and important for researchers in the field. [ABSTRACT FROM AUTHOR]

In sucker-rod pumping wells, due to the lack of an early diagnosis of operating condition or sensor faults, several problems can go unnoticed. These problems can increase downtime and production loss. In these wells, the diagnosis of operation conditions is carried out through downhole dynamometer cards, via pre-established patterns, with human visual effort in the operation centers. Starting with machine learning algorithms, several papers have been published on the subject, but it is still common to have doubts concerning the difficulty level of the dynamometer card classification task and best practices for solving the problem. In the search for answers to these questions, this work carried out sixty tests with more than 50,000 dynamometer cards from 38 wells in the Mossoró, RN, Brazil. In addition, it presented test results for three algorithms (decision tree, random forest and XGBoost), three descriptors (Fourier, wavelet and card load values), as well as pipelines provided by automated machine learning. Tests with and without the tuning of hypermeters, different levels of dataset balancing and various evaluation metrics were evaluated. The research shows that it is possible to detect sensor failures from dynamometer cards. Of the results that will be presented, 75% of the tests had an accuracy above 92% and the maximum accuracy was 99.84%. [ABSTRACT FROM AUTHOR]

Regenerative agricultural practices are a suitable path to feed the global population. Integrated Crop–livestock systems (ICLSs) are key approaches once the area provides animal and crop production resources. In Brazil, the expectation is to increase the area of ICLS fields by 5 million hectares in the next five years. However, few methods have been tested regarding spatial and temporal scales to map and monitor ICLS fields, and none of these methods use SAR data. Therefore, in this work, we explored the potential of three machine and deep learning algorithms (random forest, long short-term memory, and transformer) to perform early-season (with three-time windows) mapping of ICLS fields. To explore the scalability of the proposed methods, we tested them in two regions with different latitudes, cloud cover rates, field sizes, landscapes, and crop types. Finally, the potential of SAR (Sentinel-1) and optical (Sentinel-2) data was tested. As a result, we found that all proposed algorithms and sensors could correctly map both study sites. For Study Site 1(SS1), we obtained an overall accuracy of 98% using the random forest classifier. For Study Site 2, we obtained an overall accuracy of 99% using the long short-term memory net and the random forest. Further, the early-season experiments were successful for both study sites (with an accuracy higher than 90% for all time windows), and no significant difference in accuracy was found among them. Thus, this study found that it is possible to map ICLSs in the early-season and in different latitudes by using diverse algorithms and sensors. [ABSTRACT FROM AUTHOR]

The coffee leaf miner (Leucoptera coffeella) is a key coffee pest in Brazil that can cause severe defoliation and a negative impact on the productivity. Thus, it is essential to identify initial pest infestation for the sake of appropriate time control to avoid further economic damage to the coffee crops. A fast non-destructive method is an important tool that can be used to monitor the occurrence of the coffee leaf miner. The present work aims to identify the occurrence of coffee leaf miner infestation through a new vegetation index, using multispectral images from the Sentinel-2 satellite and the Google Earth Engine platform. Coffee leaf miner infestation was measured in the field in four cities in the state of Minas Gerais. The largest infestations occurred in September, October, and November but particularly in October 2021, in which the rate of infestation reached 85%, followed by September 2020 with a maximum infestation of 76%. The calculation steps of the vegetation indices and mappings were carried out in the Google Earth Engine cloud processing platform through the development of a script in JavaScript programming language. Combinations of two sensitive bands were selected to detect coffee leaf miner infestation, and from these, the "Coffee-Leaf-Miner Index" was developed, which was compared with other existing vegetation indices in terms of their performance for coffee leaf miner detection. The combination of the NIR–BLUE and NIR–RED bands was more sensitive for the detection of coffee leaf miner infestation; therefore, the NIR, BLUE, and RED bands were selected to develop the new index. The "Coffee-Leaf-Miner Index" presented the best performance among those evaluated, with a coefficient of determination of about 0.87, a root mean square error of 4.92% coffee leaf miner infestation, accuracy of 89.47%, and kappa coefficient of 95.39. The R2 range of other spectral indices which exist in the literature and which were used in this study was from 0.017 to 0.867, and the root mean square error ranged from 4.996 to 13.582% coffee leaf miner infestation. The machine learning method was then adopted using the supervised Random Forest and Support Vector Machine algorithms to recognize patterns of coffee leaf miner infestation in the field, only the Coffee-Leaf-Miner Index was used for the identification test of the coffee leaf miner infestation. The Support Vector Machine with linear Kernel type was applied to establish a discrimination model. The number of trees for the Random Forest classifier was 100. The Support Vector Machine presented a lower performance than the Random Forest algorithm, but the performance of both were above 80% for user and producer precision. Three bands (Blue, Red, NIR) were selected for the creation of the new index, which showed capacity for remote detection of coffee leaf miner infestation on a regional scale. Thus, "Coffee-Leaf-Miner Index" can identify coffee leaf miner infestation thanks to all the complexity involved in detecting pests via orbital remote sensing. [ABSTRACT FROM AUTHOR]

Identifying nematode damage in large soybean areas is not always achievable in a practical way. Multispectral reflectance sensors have not been thoroughly evaluated to detect nematode damage in soybeans (Glycine max L.). The main research aims of this study were to: (i) determine the bivariate relationship between individual spectral bands and vegetation indices (VIs) relative to soybean conditions (symptomatic versus asymptomatic), and (ii) to select the best model for identifying plant conditions using three algorithms (logistic regression—LR, random forest—RF, conditional inference tree—CIT) and three options for data input using bands, vegetation indices (VIs), and bands plus VIs. The trial was conducted in Brazil on three on-farm soybean fields presenting different species of nematode infestation. Multispectral imagery was obtained using a drone-mounted MicaSense RedEdge® sensor. At each sampling, georeferenced point nematode infestation and spectral measurements of soybean plants were retrieved for the classification of symptomatic and asymptomatic areas, according to the threshold level adopted. Bivariate analysis of variance (ANOVA), LR, RF, and CIT were used to select the multispectral bands/VIs that discriminated among symptomatic and asymptomatic plants, assessing the best model via their respective parameters for accuracy, sensitivity, and specificity. The greatest classification accuracy (>0.70) was achieved when using the CIT algorithm with the spectral bands only, with green (560 ± 20 nm) and near-infrared (840 ± 40 nm) included as the main spectral input variables in the model. These results demonstrate the potential of combining remotely sensed data and machine learning to distinguish nematode-symptomatic and asymptomatic soybean plants. [ABSTRACT FROM AUTHOR]

The health sector faces a series of problems generated by patients who miss their scheduled appointments. The main challenge to this problem is to understand the patient's profile and predict potential absences. The goal of this work is to explore the main causes that contribute to a patient's no-show and develop a prediction model able to identify whether the patient will attend their scheduled appointment or not. The study was based on data from clinics that serve the Unified Health System (SUS) at the University of Vale do Itajaí in southern Brazil. The model obtained was tested on a real collected dataset with about 5000 samples. The best model result was performed by the Random Forest classifier. It had the best Recall Rate (0.91) and achieved an ROC curve rate of 0.969. This research was approved and authorized by the Ethics Committee of the University of Vale do Itajaí, under opinion 4270,234, contemplating the General Data Protection Law. [ABSTRACT FROM AUTHOR]

Simple Summary: Monitoring animal activity in production systems is an important tool for obtaining information on health, production, and reproduction. In this study, we evaluated the use of accelerometers with different strategies to predict the grazing behavior of Nelore cattle. This research was conducted in an environment both more challenging and representative of the practices adopted in livestock production systems in Brazil. The results of this study showed that the use of the Random Forest algorithm, together with techniques for resampling the training data of the models, classified the studied behaviors with high accuracy, especially for important, and less frequent activities such as water consumption frequency. Knowledge of animal behavior can be indicative of the well-being, health, productivity, and reproduction of animals. The use of accelerometers to classify and predict animal behavior can be a tool for continuous animal monitoring. Therefore, the aim of this study was to provide strategies for predicting more and less frequent beef cattle grazing behaviors. The behavior activities observed were grazing, ruminating, idle, water consumption frequency (WCF), feeding (supplementation) and walking. Three Machine Learning algorithms: Random Forest (RF), Support Vector Machine (SVM) and Naïve Bayes Classifier (NBC) and two resample methods: under and over-sampling, were tested. Overall accuracy was higher for RF models trained with the over-sampled dataset. The greatest sensitivity (0.808) for the less frequent behavior (WCF) was observed in the RF algorithm trained with the under-sampled data. The SVM models only performed efficiently when classifying the most frequent behavior (idle). The greatest predictor in the NBC algorithm was for ruminating behavior, with the over-sampled training dataset. The results showed that the behaviors of the studied animals were classified with high accuracy and specificity when the RF algorithm trained with the resampling methods was used. Resampling training datasets is a strategy to be considered, especially when less frequent behaviors are of interest. [ABSTRACT FROM AUTHOR]