Search

In this paper, the stress–strength reliability $ R_{s,k} $ R s , k of a multicomponent s-out-of-k system for exponentiated Gumbel distribution is considered. An s-out-of-k system means a system with total k components and the system can survive only when atleast s of the total components function properly. The ability of the system to overcome the experiencing stress with its strength is termed as its stress–strengh reliability. The maximum likelihood estimator and Bayes estimator for $ R_{s,k} $ R s , k are obtained. The Bayes estimators are obtained using Markov chain Monte Carlo(MCMC) method under both symmetric and asymmetric loss functions. The loss functions we considered are squared error loss function, LINEX loss function and entropy loss function. The asymptotic, bootstrap and highest posterior density(HPD) confidence intervals for $ R_{s,k} $ R s , k are also obtained. A simulation study is conducted for evaluating the efficiency of the estimators derived in this paper. Real data sets are also considered for illustration. [ABSTRACT FROM AUTHOR]

The two-parameter Rayleigh distribution, as an extended distribution of the Rayleigh distribution, has been widely applied in reliability analysis. With the introduction of the location parameter, two-parameter Rayleigh distribution becomes more flexible in fitting real-data. In this paper, based on generalized progressively hybrid censored(GPHC) sample from the two-parameter Rayleigh distribution, Classical and Bayesian inferences are discussed. The Newton-Raphson(NR) and Expectation-Maximization(EM) algorithms are used to compute the maximum likelihood estimates(MLEs). As well as the asymptotic confidence interval(ACI) estimation is obtained through the asymptotic distribution theory of maximum likelihood estimation(MLE) and computation of the observed Fisher information matrix. In Bayesian frame, the estimation of unknown parameters and prediction of future observable are taken into consideration. Due to Bayesian estimation is challenging to compute precisely and for the purpose of comparison, the Lindley's approximation, the Tierney-Kadane(TK) approximation and Markov chain Monte Carlo(MCMC) method are employed to obtain Bayesian estimates. Then, combining the MCMC algorithm mentioned in the article, the one- and two- samples Bayesian prediction are obtained. Finally, the simulation results are provided and a real-life data set is used for illustration purpose. [ABSTRACT FROM AUTHOR]

In this paper, we have introduced the concept of a new multicomponent reliability function ρk(t).${\rho }_k(t).$ Estimation procedures are developed for ρk(t)${\rho }_k(t)$ under progressive type II censoring scheme, which is subsequently used to develop the estimation procedures for the multicomponent stress‐strength reliability function ρs,k${\rho }_{s,\ k}$. Herein, we consider a system having k statistically independent and identically distributed strength components, Xi,i=1,2,...,k${X}_i,\ i = 1,2,\ldots,k$, say, which are exposed to a common random stress Y. Both strength and stress variables are independent and follow different scaled proportional hazard rate family of distributions with common scale parameter. The reliability functions ρk(t)${\rho }_k(t)$ and ρs,k${\rho }_{s,\ k}$ are estimated by using maximum likelihood and Bayesian methods of estimation. The performances of these estimators are studied on the basis of their mean squared errors through Monte Carlo simulation technique. Finally, the utility of the proposed estimators is examined and explained through two different real data sets. [ABSTRACT FROM AUTHOR]

Ranked set sampling (RSS) has been proved to be an efficient sampling design for parametric and nonparametric inference. This paper explores inference for a maximum RSS procedure with unequal samples (MRSSU) with multiple dependent failure causes. When the lifetimes of units are characterized by a proposed complementary competing risks model, classical likelihood and Bayesian approaches are discussed for parameters and reliability estimation. Maximum likelihood estimators of model parameters and associated existence and uniqueness are established, and approximate confidence intervals are constructed using asymptotic theory and delta methods. With respect to general flexible priors, Bayesian estimates of interested quantities are also performed and a Monte Carlo sampling algorithm is proposed for complex posterior computation. Additionally, when extra historical information between the competing risks parameters is available, likelihood and Bayesian estimation are also studied under an order restriction case. Different methods are compared based on extensive simulation studies, and another real data example is demonstrated for application propose. [ABSTRACT FROM AUTHOR]

In this paper, we focus on Bayesian estimation of the parameters in the geometric process (GP) in which the first occurrence time of an event is assumed to have Weibull distribution. The Bayesian estimators are derived based on both symmetric (Squared Error) and asymmetric (General Entropy, LINEX) loss functions. Since the Bayesian estimators of unknown parameters cannot be obtained analytically, Lindley's approximation and the Markov Chain Monte Carlo (MCMC) methods are applied to compute the Bayesian estimates. Furthermore, by using the MCMC methods, credible intervals of the parameters are constructed. Maximum likelihood (ML) estimators are also derived for unknown parameters. The confidence intervals of the parameters are obtained based on an asymptotic distribution of ML estimators. Moreover, the performances of the proposed Bayesian estimators are compared with the corresponding ML, modified moment and modified maximum likelihood estimators through an extensive simulation study. Finally, analyses of two different real data sets are presented for illustrative purposes. [ABSTRACT FROM AUTHOR]

In this paper, the Bayesian and non-Bayesian estimation of $$\psi = P(X \gt Y)$$ ψ = P (X > Y) based on the progressively first-failure censored data is considered. The $$X$$ X and $$Y$$ Y are strength and stress random variables and follow the Topp-Leone distributions, respectively. The maximum likelihood and Bayes estimators of $$\psi $$ ψ are derived. The Bayes estimators under generalized entropy loss function are computed using Lindley's approximation and Gibbs sampling methods. Different interval estimates like asymptotic, bootstrap confidence, Bayesian credible, and highest posterior density credible intervals of $$\psi $$ ψ are constructed. Furthermore, a Monte Carlo numerical study is conducted to check the performance of various estimators developed. Finally, an application of algorithm real data is considered for illustrative purposes. [ABSTRACT FROM AUTHOR]

The competing risks model plays an important role in the statistical analysis of engineering, econometric, biological and other fields. A tested product may fail from different causes. Therefore, these failure causes as if competing with each other to bring about the failure of tested products (an experimental unit). Hence, in the statistical literature, this is known as the competing risk problem and it has been studied quite extensively by several researchers when the lifetime of the product is the latent failure time of the first failure cause among all the possible failure causes. In this paper, a competing risks model based on a generalized progressive hybrid type-I (GPH type-I) censoring is considered when the latent lifetime distributions of failure causes are inverse Weibull (IW) distributed and partially observed. We established various estimation methods including Maximum likelihood estimates (MLEs) and Bayes estimates (BEs). MLEs with the corresponding asymptotic confidence intervals are obtained. Bayes estimates of the parameters are obtained based on squared error loss (SEL) function under the assumption of independent gamma priors. Furthermore, we applied Markov Chain Monte Carlo (MCMC) techniques to compute BEs and to calculate the credible intervals. Finally, simulation studies and real data set are used for illustrative purpose. [ABSTRACT FROM AUTHOR]

Inverse Weibull (IW) distribution is widely used due to its non-monotonic hazard function. For the IW distribution, existing research on statistical inference has mostly focused on censored data, but there has been no study on multiply Type-I censoring until now as far as we know. The multiple Type-I censoring, acted as an extended form of Type-I censoring, is frequently encountered in industry and medicine research, which also needs to be paid attention. Thus, this study conducts detailed analyses on the reliability of IW distribution with multiply Type-I censored data, including point estimation and confidence interval (CI) construction. Four methods, including the maximum likelihood estimation (MLE), least square estimation (LSE), and two Bayesian estimations, namely MCMC and Lindley, are adopted in point estimation. Results show that the Lindley method performs best with small mission times, while MLE is optimal for large mission times. Specifically, for the CIs construction, we proposed a pivotal quantity based on LSE to construct the CIs of reliability and compare it with two popular methods, Fisher information matrix (FIM) derivation and MCMC algorithm. Our proposed method shows competitive performance as the MCMC and outperforms FIM. Finally, those estimation methods are applied to an example for illustration. [ABSTRACT FROM AUTHOR]

Copula models are increasingly recognized for their ability to capture complex dependencies among random variables. In this study, we introduce three innovative bivariate models utilizing copula functions: the XLindley (XL) distribution with Frank, Gumbel, and Clayton copulas. The results highlight the fundamental characteristics and effectiveness of these newly introduced bivariate models. Statistical inference for the distribution parameters is conducted using a Type II censored sampling design. This employs maximum likelihood and Bayesian estimation techniques. Asymptotic and credible confidence intervals are calculated, and numerical analysis is performed using the Markov Chain Monte Carlo method. The proposed methodology's applicability is illustrated by analyzing several real-world datasets. The initial dataset examines burr formation occurrences and consists of two observation sets. Additionally, the second and third datasets contain medical information. The second dataset focuses on diabetic nephropathy, while the third dataset explores infection and recurrence time among kidney patients. [ABSTRACT FROM AUTHOR]

In this article, the problem of estimation of reliability of a ℓ-component system when both the stress and strength components are assumed to have a power Lindley distribution is discussed. The multicomponent stress–strength reliability parameter is obtained using both the Bayesian and the classical approaches when component-wise each unit follows a power Lindley distribution. To estimate the multicomponent stress–strength reliability parameter under the classical approach, the method of maximum likelihood and the asymptotic confidence interval estimation method are used as point and interval estimation methods, respectively. Under the Bayesian paradigm, the reliability parameter is estimated under the linear exponential loss function using the Lindley approximation, the Tierney–Kadane approximation and the Markov chain Monte Carlo (MCMC) techniques and subsequently highest posterior density credible intervals are obtained. To validate the efficacy of the proposed estimation strategies, a simulation study is carried out. Finally, two real-life data sets are re-analysed for illustrative purposes. [ABSTRACT FROM AUTHOR]