Search

In 2023, residential and commercial sectors together consumed approximately 27.6% of total United States (U.S.) energy, equivalent to about 20.6 quadrillion Btu. Factoring in the electrical system energy losses, the residential sector represented approximately 19.7% of total U.S. energy consumption during that time. There were approximately 144 million housing units in the United States in 2023, which is increasing yearly. In this study, information on energy usage in the United States residential sector has been analyzed and then represented as energy intensities to establish benchmark data and to compare energy consumption of varying sizes and locations. First, public sources were identified and data from these previously published sources were aggregated to determine the energy use of the residential sector within the US. Next, as part of this study, the energy data for seven houses/apartments from five different United States climate zones were collected firsthand. That data were analyzed, and the energy intensity of each home was calculated and then compared with the energy intensities of the other homes in the same states using Residential Energy Consumption Survey (RECS) data. The energy intensity for each facility was calculated based on the actual energy bills. Finally, the study evaluated the carbon footprint associated with residential energy consumption in all 50 states to reinforce the importance of sustainable development initiatives. [ABSTRACT FROM AUTHOR]

Carbon Capture, Utilization, and Storage (CCUS) represents a vital technology for addressing pressing global challenges such as climate change and carbon emissions. This research aims to explore the relationship between the CCUS capability and carbon emissions in the United States considering thirteen predictors of CCUS and carbon emissions. Incorporating these predictors, we aim to offer policymakers insights to enhance CCUS capabilities and reduce carbon emissions. We utilize diverse econometric techniques: OLS, Lasso, Ridge, Elastic Net, Generalized Method of Moments, and Seemingly Unrelated Regression. Elastic Net outperforms the other models in explaining CCUS, while OLS is effective for carbon emissions. We observe positive impacts of the number of projects and foreign direct investment on the CCUS capacity, but limited influence from the CCUS technology level. However, the relationship between the CCUS capacity and carbon emissions remains limited. Our study highlights the importance of incentivizing projects to increase CCUS capabilities and recognizes the critical role of legal and regulatory frameworks in facilitating effective CCUS implementation in the US. Moreover, we emphasize that achieving decarbonization goals necessitates the development of affordable green alternatives. It is essential to view CCUS as a complementary, rather than a sole, solution for emission reduction as we work towards achieving net-zero emission targets. [ABSTRACT FROM AUTHOR]

More water utilities are adopting aquifer storage and recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover large volumes of water in one interval instead of recovering smaller volumes at more frequent intervals. The H2Oaks recovery process experienced a 78% decrease in energy intensity from 0 to 50,000 m3 recovered, while the Sand Hollow site experienced a 43% decrease in energy intensity from 0 to 50,000 m3 recovered. Statistical analyses of the recovery process showed p values lower than 0.0001, R2 values between 0.43 and 0.57, and a RMSE value between 0.55 and 2.1, indicating the presence of a moderate correlation between energy and volume. This economy of scale has been observed in multiple instances in water and wastewater treatment. This finding not only has applications to ASR but also to all recovery or recharge wells, whether or not they are paired with each other. Furthermore, this study confirms the need for more reliable and accessible energy data to fully understand the implications of the energy–water nexus. [ABSTRACT FROM AUTHOR]

This study investigates the impact of an active workstation on heating and cooling energy consumption in commercial buildings. The improved performance and health of office workers are well-known and supported by several surveys and studies. However, the preferred and revised indoor air temperature for different activities of the employees, such as standing and walking, directly impacts the energy consumption of the building. Therefore, this study systematically quantifies the impact of indoor environments on building energy consumption using a simulation tool. Based on literature reviews with multidisciplinary fields, revised setpoint temperature, metabolic rate, and required outdoor air rate due to the level of active workstation (standing and walking) are applied to EnergyPlus reference building models. The impact on heating and cooling energy consumption is analyzed by considering several representative cities in the United States. Their average sensitivity was found to be 7.28% lower and 14.28% higher for heating and cooling energy, respectively. The total increment of $13,887 represents approximately 0.16% of the total profit of the corporation. This increment can be justified given the benefits to workers' health, which include lower insurance costs and improved performance. This suggests that it is economically desirable to deploy active workstations widely. [ABSTRACT FROM AUTHOR]

By using space-based measurements of the column-averaged dry air mole fraction of carbon dioxide (XCO2) from the Orbiting Carbon Observatory-2 (OCO-2) and CO and NO2 from the Tropospheric Monitoring Instrument (TROPOMI), this study investigates the seasonal variation in the characteristics of CO2, CO, and NO2 across major states in the United States. Beyond correlating these trends with natural factors, significant emphasis is placed on human activities, including heating demands, energy usage, and the impacts of the COVID-19 pandemic. Concentration enhancements in observations influenced by anthropogenic emissions from urban regions relative to background values are calculated to estimate gas emissions. Our investigation reveals a strong correlation between NO2 and CO2 emissions, as evidenced by a correlation coefficient (r) of 0.75. Furthermore, we observe a correlation of 0.48 between CO2 and CO emissions and a weaker correlation of 0.37 between CO and NO2 emissions. Notably, we identify the NO2 concentration as a reliable indicator of CO2 emission levels, in which a 1% increase in NO2 concentration corresponds to a 0.8194% (±0.0942%) rise in annual mean CO2 emissions. Enhancement ratios among NO2, CO, and XCO2 are also calculated, uncovering that high ΔNO2: ΔXCO2 ratios often signify outdated industrial structures and production technologies, while low ΔCO: ΔXCO2 ratios are linked to states that utilize clean energy sources. This approach offers a deeper understanding of the effect of human activities on atmospheric gas concentrations, paving the way for more effective environmental monitoring and policy-making. [ABSTRACT FROM AUTHOR]