Search

The launcher recovery method known as 'In-Air Capturing' is an innovative approach where a winged rocket stage is captured mid-air by an aircraft and subsequently towed back to the launch site. To achieve this, a capturing device attached to a tether is released from the towing aircraft. This device autonomously connects the reusable launch vehicle to the aircraft, while the two vehicles are in proximity. The tether's flexible dynamics have a strong influence on the maneuverability of the capturing device. Thus, it is critical to model the dynamics of the tether to get a realistic understanding and to evaluate feasibility of the concept. However, precise modelling and control of highly flexible systems with large deformations is both challenging and computationally intensive. For engineering applications which involve closed-loop simulations, finding a trade-off between accuracy and computational effort is crucial. In this paper, the tether is modelled as a discretized chain of rigid bodies connected by rotational springs at the joints. The tether along with the capture system is integrated in a simulation model and open loop tests are performed to analyse the system characteristics. The tether properties are studied to find a suited configuration for 'In-Air Capturing'. • Multibody modelling approach for long cable like bodies with large deformation. • Capture system dynamics for the unique 'In-Air Capturing' launcher recovery concept. • Dynamic modelling for the complete capturing system including towing aircraft, capturing device and tether. • Assessment of tether properties suited for 'In-Air Capturing' with sensitivity studies. [ABSTRACT FROM AUTHOR]

This paper proposes rigid-body modelling and identification procedures for long-reach dual-arm manipulators in a cable-suspended pendulum configuration. The proposed model relies on a virtually constrained open kinematic chain and lends itself to be simulated through the most commonly used robotic simulators without explicitly account for the cables constraints and flexibility. Moreover, a dynamic parameters identification procedure is devised to improve the simulation model fidelity and reduce the sim-to-real gap for controllers deployment. We show the capability of our model to handle different cable configurations and suspension mechanisms by customising it for two representative cable-suspended dual-arm manipulation systems: the LiCAS arms suspended by a drone and the CRANEbot system, featuring two Pilz arms suspended by a crane. The identified dynamic models are validated by comparing their evolution with data acquired from the real systems showing a high (between 91.3% to 99.4%) correlation of the response signals. In a comparison performed with baseline pendulum models, our model increases the simulation accuracy from 64.4% to 85.9%. The simulation environment and the related controllers are released as open-source code. • Cable-suspended long-reach manipulators perform hazardous inspection and maintenance. • Accurate simulation and control development for cable-suspended robots is crucial. • Simplified dynamic model can be readily integratable into standard simulators. • Identification procedure to reduce sim-to-real gap and develop model-based controls. [ABSTRACT FROM AUTHOR]