Search

Total hemispherical emittance measurements are made routinely for materials which may be heated by electrical resistance methods over the temperature range of 600 degrees to 2,000 F by using a black-body reference method. This employs a conical black body and a thermopile detector with a calcium fluoride lens. Emittance is obtained by measuring the radiant flux from the specimen strip and comparing it with the flux from an equal area of the black-body cone at the same temperature. The temperature measurements are made by use of thermocouples. It is planned to extend the temperature range of this type of measurement to temperatures above 2,000 F. Another technique has been investigated for measuring emittance of materials not amenable to electrical heating or thermocouple attachment. This method uses a black-body-cavity furnace similar to that used in reference 5 to measure emittance of transparent materials such as glass. The method employs a heated black-body cavity in which the semicircular specimen is allowed to come to the equilibrium temperature of the cavity and then is rotated in front of a water-cooled viewing port where a sensitive thermistor detector alternately views the specimen surface and the black-body cavity. The ratio of the two readings gives the specimen emittance directly, for the temperature of the black body. The detector output is recorded on a fast Brown self-balancing potentiometer. The furnace is provided with a water-cooled blackened shutter which may be inserted behind the specimen to eliminate any transmitted black-body radiation if the specimen is transparent. This apparatus is capable of measuring total normal emittance over the temperature range of 1,000 degrees to 2,000 F. Preliminary data for boron nitride specimens of two thicknesses are shown where total normal emittance is plotted against temperature for two experimental conditions: (1) black-body radiation incident on the back of the specimen and (2) no black-body radiation incident on the back of the specimen (that is, with a watercooled shutter behind the specimen). The data appear to indicate a slight transparency for the thin specimen and emittances of from 0.7 to 0.8 over the temperature range.

The Manned Spacecraft Center was pleased to host the NASA Conference on Materials for Improved Fire Safety which was held on May 6 and 7, 1970. This document is a compilation of papers presented at the conference and represents the culmination of several years of effort by NASA and industry which was directed toward the common objective of minimizing the fire hazard in manned spacecraft and in some other related areas. One of the more serious problem areas in the Apollo program was the flammability of nonmetallic materials. The effective and timely solution of this problem area resulted from much of the effort reported herein and contributed greatly toward the successful achievement of landing men on the moon and returning them safely to earth.

Many recent studies of solid-state phenomena, particularly in the area of crystal imperfections, have involved the use of melt-grown NaCl single crystals. Quite often trace impurities in these materials have had a prominent effect on these phenomena. Trace amounts of hydroxide ion have been found in melt-grown NaCl crystals. This paper describes a nondestructive method of neutralizing the hydroxide ion in such crystals. Crystals of similar hydroxide content are maintained at an elevated temperature below the melting point of NaCl in a flowing atmosphere containing. dry hydrogen chloride. Heat treatment is continued until an analysis of the test specimens shows no excess hydroxide ion. A colorimetric method previously described4 is used for this analysis.

In a previous paper, results are presented of accurate investigations of the processes of titanium carbonization and the succeeding titanium carbide decarbonization as related to the phenomenon of the graphitization of soot by heating at a constant temperature in atmospheres of pure hydrogen and carbon monoxide. These tests showed that the processes of titanium carbonization-decarbonization in an atmosphere of pure gases without nitrogen proceed in the same direction as the analogous processes under the conditions of the production furnace. In this case, however, the presence of admixtures of nitrogen changes the quantitative results of the decarbonization process. Thermodynamic computations confirming the results of previous tests conducted at atmospheric pressure and additional tests of titanium carbonization at lowered pressures are presented herein.

This paper attempts to state laws for the self-ignition and combustion of gases in a comprehensive manner.

This paper discusses the thermal theory of combustion and explosion, and conditions of ignition: transformation accompanied by heat liberation, transformation rate and temperature dependence.

In 1929 London 1 published a very approximate solution of the Schroedinger equation for a system of chemical interest: H3. To the extent that chemistry can be regarded as existing separately from physics, this was a landmark in the history of chemistry, comparable in importance to the landmark in the history of physics marked by the appearance of the Heitler-London equation for H2. The expression for H3, was, of necessity, even less accurate than that for H2, but chemists, like the habitual poor, were accustomed to this sort of misfortune. Together with the physicists they enjoyed the sensation of living in a renaissance. The physicists still could not calculate a great deal that was of interest to them, and the chemists could calculate less, but both could now dream. It would be too easy to say that their dreams were dreams of unlimited computer time. Their dreams were a lot more productive than that. Two years after London published his equation, H. Eyring and M. Polanyi obtained the first numerical energy surface for H3. They infused the London equation with a measure of empiricism to produce an energy surface which, whether or not it was correct in its details, provided a basis for further speculations of an important sort. The existence of a tangible energy surface in 1931 stimulated speculation along two different lines. The following year Pelzer and Wigner used this London-Eyring-Polanyi (LEP) energy surface for a thermodynamic treatment of the reaction rate in H + H2. This important development reached its full flowering a few years later. In these remarks I shall be concerned with another line of development. A second more-or-less distinct category of speculation that began with (and, indeed, in) the 1931 paper has to do with the dynamics of individual reactive encounters under the influence of specified interaction potentials.