Search

Numerous hectares of land are destroyed by wildfires every year, causing harm to the environment, the economy, and the ecology. More than fifty million acres have burned in several states as a result of recent forest fires in the Western United States and Australia. According to scientific predictions, as the climate warms and dries, wildfires will become more intense and frequent, as well as more dangerous. These unavoidable catastrophes emphasize how important early wildfire detection and prevention are. The energy management system described in this paper uses an unmanned aircraft system (UAS) with air quality sensors (AQSs) to monitor spot fires before they spread. The goal was to develop an efficient autonomous patrolling system that detects early wildfires while maximizing the battery life of the UAS to cover broad areas. The UAS will send real-time data (sensor readings, thermal imaging, etc.) to a nearby base station (BS) when a wildfire is discovered. An optimization model was developed to minimize the total amount of energy used by the UAS while maintaining the required levels of data quality. Finally, the simulations showed the performance of the proposed solution under different stability conditions and for different minimum data rate types. [ABSTRACT FROM AUTHOR]

The emission of black carbon (BC) particles, which cause atmospheric warming by affecting radiation budget in the atmosphere, is the result of an incomplete combustion process of organic materials. The recent wildfire event during the summer 2019–2020 in south-eastern Australia was unprecedented in scale. The wildfires lasted for nearly 3 months over large areas of the two most populated states of New South Wales and Victoria. This study on the emission and dispersion of BC emitted from the biomass burnings of the wildfires using the Weather Research Forecast–Chemistry (WRF–Chem) model aims to determine the extent of BC spatial dispersion and ground concentration distribution and the effect of BC on air quality and radiative transfer at the top of the atmosphere, the atmosphere and on the ground. The predicted aerosol concentration and AOD are compared with the observed data using the New South Wales Department of Planning and Environment (DPE) aethalometer and air quality network and remote sensing data. The BC concentration as predicted from the WRF–Chem model, is in general, less than the observed data as measured using the aethalometer monitoring network, but the spatial pattern corresponds well, and the correlation is relatively high. The total BC emission into the atmosphere during the event and the effect on radiation budget were also estimated. This study shows that the summer 2019–2020 wildfires affect not only the air quality and health impact on the east coast of Australia but also short-term weather in the region via aerosol interactions with radiation and clouds. [ABSTRACT FROM AUTHOR]

Simple Summary: In 2019–2020, Australia had a particularly bad bushfire season which resulted in large numbers of people and animals being exposed to smoke haze for several weeks. We conducted a literature review to examine the evidence for effects of prolonged exposure to bushfire smoke on cattle. There was general agreement that small airborne particulate matter in smoke is the substance most likely to cause problems. There was indirect evidence about effects on cattle caused by other types of pollution containing particulate matter. We found little evidence to support severe effects on cattle. This may be because cattle do not tend to suffer from the co-morbidities that, in the human population, seem to be made worse by smoke and pollution. However, small changes to death rates or disease that is not severe may go unreported, so further study is warranted. In 2019–2020, a particularly bad bushfire season in Australia resulted in cattle being exposed to prolonged periods of smoke haze and reduced air quality. Bushfire smoke contains many harmful pollutants, and impacts on regions far from the fire front, with smoke haze persisting for weeks. Particulate matter (PM) is one of the major components of bushfire smoke known to have a negative impact on human health. However, little has been reported about the potential effects that bushfire smoke has on cattle exposed to smoke haze for extended periods. We explored the current literature to investigate evidence for likely effects on cattle from prolonged exposure to smoke generated from bushfires in Australia. We conducted a search for papers related to the impacts of smoke on cattle. Initial searching returned no relevant articles through either CAB Direct or PubMed databases, whilst Google Scholar provided a small number of results. The search was then expanded to look at two sub-questions: the type of pollution that is found in bushfire smoke, and the reported effects of both humans and cattle being exposed to these types of pollutants. The primary mechanism for damage due to bushfire smoke is due to small airborne particulate matter (PM). Although evidence demonstrates that PM from bushfire smoke has a measurable impact on both human mortality and cardiorespiratory morbidities, there is little evidence regarding the impact of chronic bushfire smoke exposure in cattle. We hypothesize that cattle are not severely affected by chronic exposure to smoke haze, as evidenced by the lack of reports. This may be because cattle do not tend to suffer from the co-morbidities that, in the human population, seem to be made worse by smoke and pollution. Further, small changes to background mortality rates or transient morbidity may also go unreported. [ABSTRACT FROM AUTHOR]

Smoke pollution from landscape fires is a major health problem, but it is difficult to predict the impact of any particular fire. For example, smoke plumes can be mapped using remote sensing, but we do not know how the smoke is distributed in the air-column. Prescribed burning involves the deliberate introduction of smoke to human communities but the amount, composition, and distribution of the pollution may be different to wildfires. We examined whether mapped plumes produced high levels of particulate pollution (PM2.5) at permanent air quality monitors and factors that influenced those levels. We mapped 1237 plumes, all those observed in 17 years of MODIS imagery over New South Wales, Australia, but this was only ~20% of known fires. Prescribed burn plumes tended to occur over more populated areas than wildfires. Only 18% of wildfire plumes and 4% of prescribed burn plumes passed over a monitor (n = 115). A minority of plumes caused a detectable increase in PM2.5: prescribed burn plumes caused an air quality exceedance for 33% of observations in the daytime and 11% at night, wildfire plumes caused exceedances for 48% and 22% of observations in the day and night-time, respectively. Thus, most plumes remained aloft (did not reach the surface). Statistical modelling revealed that wind speed, temperature, and mixing height influenced whether a plume caused an exceedance, and there was a difference between prescribed and wild fires. In particular, in wind speeds below 1 kmhr−1, exceedance was almost certain in prescribed burns. This information will be useful for planning prescribed burning, preparing warnings, and improving our ability to predict smoke impacts. [ABSTRACT FROM AUTHOR]