Search

In 2023, residential and commercial sectors together consumed approximately 27.6% of total United States (U.S.) energy, equivalent to about 20.6 quadrillion Btu. Factoring in the electrical system energy losses, the residential sector represented approximately 19.7% of total U.S. energy consumption during that time. There were approximately 144 million housing units in the United States in 2023, which is increasing yearly. In this study, information on energy usage in the United States residential sector has been analyzed and then represented as energy intensities to establish benchmark data and to compare energy consumption of varying sizes and locations. First, public sources were identified and data from these previously published sources were aggregated to determine the energy use of the residential sector within the US. Next, as part of this study, the energy data for seven houses/apartments from five different United States climate zones were collected firsthand. That data were analyzed, and the energy intensity of each home was calculated and then compared with the energy intensities of the other homes in the same states using Residential Energy Consumption Survey (RECS) data. The energy intensity for each facility was calculated based on the actual energy bills. Finally, the study evaluated the carbon footprint associated with residential energy consumption in all 50 states to reinforce the importance of sustainable development initiatives. [ABSTRACT FROM AUTHOR]

Carbon Capture, Utilization, and Storage (CCUS) represents a vital technology for addressing pressing global challenges such as climate change and carbon emissions. This research aims to explore the relationship between the CCUS capability and carbon emissions in the United States considering thirteen predictors of CCUS and carbon emissions. Incorporating these predictors, we aim to offer policymakers insights to enhance CCUS capabilities and reduce carbon emissions. We utilize diverse econometric techniques: OLS, Lasso, Ridge, Elastic Net, Generalized Method of Moments, and Seemingly Unrelated Regression. Elastic Net outperforms the other models in explaining CCUS, while OLS is effective for carbon emissions. We observe positive impacts of the number of projects and foreign direct investment on the CCUS capacity, but limited influence from the CCUS technology level. However, the relationship between the CCUS capacity and carbon emissions remains limited. Our study highlights the importance of incentivizing projects to increase CCUS capabilities and recognizes the critical role of legal and regulatory frameworks in facilitating effective CCUS implementation in the US. Moreover, we emphasize that achieving decarbonization goals necessitates the development of affordable green alternatives. It is essential to view CCUS as a complementary, rather than a sole, solution for emission reduction as we work towards achieving net-zero emission targets. [ABSTRACT FROM AUTHOR]

More water utilities are adopting aquifer storage and recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover large volumes of water in one interval instead of recovering smaller volumes at more frequent intervals. The H2Oaks recovery process experienced a 78% decrease in energy intensity from 0 to 50,000 m3 recovered, while the Sand Hollow site experienced a 43% decrease in energy intensity from 0 to 50,000 m3 recovered. Statistical analyses of the recovery process showed p values lower than 0.0001, R2 values between 0.43 and 0.57, and a RMSE value between 0.55 and 2.1, indicating the presence of a moderate correlation between energy and volume. This economy of scale has been observed in multiple instances in water and wastewater treatment. This finding not only has applications to ASR but also to all recovery or recharge wells, whether or not they are paired with each other. Furthermore, this study confirms the need for more reliable and accessible energy data to fully understand the implications of the energy–water nexus. [ABSTRACT FROM AUTHOR]

This study investigates the impact of an active workstation on heating and cooling energy consumption in commercial buildings. The improved performance and health of office workers are well-known and supported by several surveys and studies. However, the preferred and revised indoor air temperature for different activities of the employees, such as standing and walking, directly impacts the energy consumption of the building. Therefore, this study systematically quantifies the impact of indoor environments on building energy consumption using a simulation tool. Based on literature reviews with multidisciplinary fields, revised setpoint temperature, metabolic rate, and required outdoor air rate due to the level of active workstation (standing and walking) are applied to EnergyPlus reference building models. The impact on heating and cooling energy consumption is analyzed by considering several representative cities in the United States. Their average sensitivity was found to be 7.28% lower and 14.28% higher for heating and cooling energy, respectively. The total increment of $13,887 represents approximately 0.16% of the total profit of the corporation. This increment can be justified given the benefits to workers' health, which include lower insurance costs and improved performance. This suggests that it is economically desirable to deploy active workstations widely. [ABSTRACT FROM AUTHOR]

By using space-based measurements of the column-averaged dry air mole fraction of carbon dioxide (XCO2) from the Orbiting Carbon Observatory-2 (OCO-2) and CO and NO2 from the Tropospheric Monitoring Instrument (TROPOMI), this study investigates the seasonal variation in the characteristics of CO2, CO, and NO2 across major states in the United States. Beyond correlating these trends with natural factors, significant emphasis is placed on human activities, including heating demands, energy usage, and the impacts of the COVID-19 pandemic. Concentration enhancements in observations influenced by anthropogenic emissions from urban regions relative to background values are calculated to estimate gas emissions. Our investigation reveals a strong correlation between NO2 and CO2 emissions, as evidenced by a correlation coefficient (r) of 0.75. Furthermore, we observe a correlation of 0.48 between CO2 and CO emissions and a weaker correlation of 0.37 between CO and NO2 emissions. Notably, we identify the NO2 concentration as a reliable indicator of CO2 emission levels, in which a 1% increase in NO2 concentration corresponds to a 0.8194% (±0.0942%) rise in annual mean CO2 emissions. Enhancement ratios among NO2, CO, and XCO2 are also calculated, uncovering that high ΔNO2: ΔXCO2 ratios often signify outdated industrial structures and production technologies, while low ΔCO: ΔXCO2 ratios are linked to states that utilize clean energy sources. This approach offers a deeper understanding of the effect of human activities on atmospheric gas concentrations, paving the way for more effective environmental monitoring and policy-making. [ABSTRACT FROM AUTHOR]

The atrium space represents one of the most energy-intensive areas within buildings. This is especially evident in college teaching buildings, where the inclusion of atriums often leads to increased energy consumption, primarily due to enhancements in lighting and thermal comfort. To address this issue, this study investigates atriums in cold regions within college teaching buildings and establishes four distinct atrium models for such buildings through typological abstraction and evolution. This study utilizes the Grasshopper (Ladybug Tools; developed by Robert McNeel & Assoc, Inc. in the United States.) parametric performance simulation platform to simulate daylight comfort and energy consumption within the atriums. Range analysis is subsequently applied to assess the impact of variables on energy consumption, and variables with the least influence are eliminated. Subsequently, the Octopus plug-in is employed to conduct multi-objective optimization for the four atrium types, resulting in the attainment of a Pareto-optimized solution set. Following optimization, the energy efficiency rates for the four atrium types are determined as 10.3%, 17.6%, 37.2%, and 30.5%, respectively, while the daylight comfort rates experience enhancements of 4.4%, 10.4%, 44.7%, and 34%, respectively. This study provides designers with a reference for optimizing design parameters during the early stages. [ABSTRACT FROM AUTHOR]

Heavy-duty trucks contribute approximately 20% of fuel consumption in the United States of America (USA). The fuel economy of heavy-duty vehicles (HDV) is affected by several real-world parameters like road parameters, driver behavior, weather conditions, and vehicle parameters, etc. Although modern vehicles comply with emissions regulations, potential malfunction of the engine, regular wear and tear, or other factors could affect vehicle performance. Predicting fuel consumption per trip based on dynamic on-road data can help the automotive industry to reduce the cost and time for on-road testing. Data modeling can easily help to diagnose the reason behind fuel consumption with a knowledge of input parameters. In this paper, an artificial neural network (ANN) was implemented to model fuel consumption in modern heavy-duty trucks for predicting the total and instantaneous fuel consumption of a trip based on very few key parameters, such as engine load (%), engine speed (rpm), and vehicle speed (km/h). Instantaneous fuel consumption data can help to predict patterns in fuel consumption for optimized fleet operations. In this work, the data used for modeling was collected at a frequency of 1Hz during on-road testing of modern heavy-duty vehicles (HDV) at the West Virginia University Center for Alternative Fuels Engines and Emissions (WVU CAFEE) using the portable emissions monitoring system (PEMS). The performance of the artificial neural network was evaluated using mean absolute error (MAE) and root mean square error (RMSE). The model was further evaluated with data collected from a vehicle on-road trip. The study shows that artificial neural networks performed slightly better than other machine learning techniques such as linear regression (LR), and random forest (RF), with high R-squared (R2) and lower root mean square error. [ABSTRACT FROM AUTHOR]

This study comprehensively examines the effects of the COVID-19 pandemic on energy consumption in the United States. The purpose of the study is to quantify the effects of lockdowns and pandemic disruptions on energy consumption trends in order to inform policymakers and utilities on how to prepare for such events in the future. The study focuses on 2020 data collected by the Federal government. The effects are quantified using descriptive statistics. State-wise and sector-wise data have been presented using plots and heat maps. Related metrics like COVID case data, GDP, emissions, and expenditures were also presented. The total energy consumption fell by 7.5% in 2020. Besides Alaska, every state saw a decrease in energy, with some as high as 26%. The residential sector had the most states that saw an increase in energy, stemming from lockdowns and working from home. Similarly, petroleum consumption saw a decrease of 11.4% as a result of a decrease in travel. Biomass-related renewable energy generation fell by 23% due to decreased demand, while all other sources increased by 7.3%. Carbon dioxide emissions fell by 10.4%, methane by 2.8%, and nitric oxide by 6.7%. The overall per capita energy expenditure for the country dropped by 18.5%. There was a stronger correlation between GDP and energy consumption than between GDP and COVID case counts. The pandemic did not affect each state or sector evenly. The statistics and correlations presented here can be used in the ongoing effort to study the global impact of the pandemic and prepare for future challenges. [ABSTRACT FROM AUTHOR]

While price responsiveness of residential demand for natural gas has important implications on resource planning and energy modelling, its estimates from prior studies are very diverse. Applying panel data analysis and five parametric specifications to monthly data for the lower 48 states in 1990–2019, we estimate own-price elasticities of residential demand for natural gas in the United States (US). Using results from cross-section dependence (CD) test, panel unit root tests, panel time-series estimators, and rolling-window analysis, we document: (1) the statistically significant (p-value ≤ 0.05) static own-price elasticity estimates are −0.271 to −0.486, short-run −0.238 to −0.555 and long-run −0.323 to −0.796; (2) these estimates vary by elasticity type, sample period, parametric specification, treatment of CD and assumption of partial adjustment; (3) erroneously ignoring the highly significant (p-value < 0.01) CD shrinks the size of these estimates that vary seasonally, regionally, and nonlinearly over time; and (4) residential natural gas shortage costs decline with the size of own-price elasticity estimates. These findings suggest that achieving deep decarbonization may require strategies that do not rely solely on prices, such as energy efficiency standards and demand-side-management programs. Demand response programs may prove useful for managing natural gas shortages. [ABSTRACT FROM AUTHOR]

Although unique expected energy models can be generated for a given photovoltaic (PV) site, a standardized model is also needed to facilitate performance comparisons across fleets. Current standardized expected energy models for PV work well with sparse data, but they have demonstrated significant over-estimations, which impacts accurate diagnoses of field operations and maintenance issues. This research addresses this issue by using machine learning to develop a data-driven expected energy model that can more accurately generate inferences for energy production of PV systems. Irradiance and system capacity information was used from 172 sites across the United States to train a series of models using Lasso linear regression. The trained models generally perform better than the commonly used expected energy model from international standard (IEC 61724-1), with the two highest performing models ranging in model complexity from a third-order polynomial with 10 parameters ( R a d j 2 = 0.994) to a simpler, second-order polynomial with 4 parameters ( R a d j 2 = 0.993 ), the latter of which is subject to further evaluation. Subsequently, the trained models provide a more robust basis for identifying potential energy anomalies for operations and maintenance activities as well as informing planning-related financial assessments. We conclude with directions for future research, such as using splines to improve model continuity and better capture systems with low (≤1000 kW DC) capacity. [ABSTRACT FROM AUTHOR]

Offshore sites show greater potential for wind energy utilization than most onshore sites. When planning an offshore wind power farm, the speed of offshore wind is used to estimate various operation parameters, such as the power output, extreme wind load, and fatigue load. Accurate speed prediction is crucial to the running of wind power farms and the security of smart grids. Unlike onshore wind, offshore wind has the characteristics of random, intermittent, and chaotic, which will cause the time series of wind speeds to have strong nonlinearity. It will bring greater difficulties to offshore wind speed predictions, which traditional recurrent neural networks cannot deal with for lacking in long-term dependency. An offshore wind speed prediction method is proposed by using a clockwork recurrent network (CWRNN). In a CWRNN model, the hidden layer is subdivided into several parts and each part is allocated a different clock speed. Under the mechanism, the long-term dependency of the recurrent neural network can be easily addressed, which can furthermore effectively solve the problem of strong nonlinearity in offshore speed winds. The experiments are performed by using the actual data of two different offshore sites located in the Caribbean Sea and one onshore site located in the interior of the United States, to verify the performance of the model. The results show that the prediction model achieves significant accuracy improvement. [ABSTRACT FROM AUTHOR]