Search

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

The present study is an evaluation of published papers on machine learning as employed in mastitis research. The aim of this study was the quantitative evaluation of the scientific content and the bibliometric details of these papers. In total, 69 papers were found to combine machine learning in mastitis research and were considered in detail. There was a progressive yearly increase in published papers, which originated from 23 countries (mostly from China or the United States of America). Most original articles (n = 59) referred to work involving cattle, relevant to mastitis in individual animals. Most articles described work related to the development and diagnosis of the infection. Fewer articles described work on the antibiotic resistance of pathogens isolated from cases of mastitis and on the treatment of the infection. In most studies (98.5% of published papers), supervised machine learning models were employed. Most frequently, decision trees and support vector machines were employed in the studies described. 'Machine learning' and 'mastitis' were the most frequently used keywords. The papers were published in 39 journals, with most frequent publications in Computers and Electronics in Agriculture and Journal of Dairy Science. The median number of cited references in the papers was 39 (interquartile range: 31). There were 435 co-authors in the papers (mean: 6.2 per paper, median: 5, min.–max.: 1–93) and 356 individual authors. The median number of citations received by the papers was 4 (min.–max.: 0–70). Most papers (72.5%) were published in open-access mode. This study summarized the characteristics of papers on mastitis and artificial intelligence. Future studies could explore using these methodologies at farm level, and extending them to other animal species, while unsupervised learning techniques might also prove to be useful. [ABSTRACT FROM AUTHOR]

Forecasting has extreme importance in industry due to the numerous competitive advantages that it provides, allowing to foresee what might happen and adjust management decisions accordingly. Industries increasingly use sensors, which allow for large-scale data collection. Big datasets enable training, testing and application of complex predictive algorithms based on machine learning models. The present paper focuses on predicting values from sensors installed on a pulp paper press, using data collected over three years. The variables analyzed are electric current, pressure, temperature, torque, oil level and velocity. The results of XGBoost and artificial neural networks, with different feature vectors, are compared. They show that it is possible to predict sensor data in the long term and thus predict the asset's behaviour several days in advance. [ABSTRACT FROM AUTHOR]

The utilization of electrochemical detection techniques in paper-based analytical devices (PADs) has revolutionized point-of-care (POC) testing, enabling the precise and discerning measurement of a diverse array of (bio)chemical analytes. The application of electrochemical sensing and paper as a suitable substrate for point-of-care testing platforms has led to the emergence of electrochemical paper-based analytical devices (ePADs). The inherent advantages of these modified paper-based analytical devices have gained significant recognition in the POC field. In response, electrochemical biosensors assembled from paper-based materials have shown great promise for enhancing sensitivity and improving their range of use. In addition, paper-based platforms have numerous advantageous characteristics, including the self-sufficient conveyance of liquids, reduced resistance, minimal fabrication cost, and environmental friendliness. This study seeks to provide a concise summary of the present state and uses of ePADs with insightful commentary on their practicality in the field. Future developments in ePADs biosensors include developing novel paper-based systems, improving system performance with a novel biocatalyst, and combining the biosensor system with other cutting-edge tools such as machine learning and 3D printing. [ABSTRACT FROM AUTHOR]

The printing process of box packaging paper can generate volatile organic compounds, resulting in odors that impact product quality and health. An efficient, objective, and cost-effective detection method is urgently needed. We utilized a self-developed electronic nose system to test four different cigarette packaging paper samples. Employing multivariate statistical methods like Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), Statistical Quality Control (SQC), and Similarity-based Independent Modeling of Class Analogy (SIMCA), we analyzed and processed the collected data. Comprehensive evaluation and quality control models were constructed to assess sample stability and distinguish odors. Results indicate that our electronic nose system rapidly detects odors and effectively performs quality control. By establishing models for quality stability control, we successfully identified samples with acceptable quality and those with odors. To further validate the system's performance and extend its applications, we collected two types of cigarette packaging paper samples with odor data. Using data augmentation techniques, we expanded the dataset and achieved an accuracy rate of 0.9938 through classification and discrimination. This highlights the significant potential of our self-developed electronic nose system in recognizing cigarette packaging paper odors and odorous samples. [ABSTRACT FROM AUTHOR]

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future. [ABSTRACT FROM AUTHOR]

The growth in academic and scientific publications has increased very rapidly. Researchers must choose a representative and significant literature for their research, which has become challenging worldwide. Usually, the paper citation number indicates this paper's potential influence and importance. However, this standard metric of citation numbers is not suitable to assess the popularity and significance of recently published papers. To address this challenge, this study presents an effective prediction method called FutureCite to predict the future citation level of research articles. FutureCite integrates machine learning with text and graph mining techniques, leveraging their abilities in classification, datasets in-depth analysis, and feature extraction. FutureCite aims to predict future citation levels of research articles applying a multilabel classification approach. FutureCite can extract significant semantic features and capture the interconnection relationships found in scientific articles during feature extraction using textual content, citation networks, and metadata as feature resources. This study's objective is to contribute to the advancement of effective approaches impacting the citation counts in scientific publications by enhancing the precision of future citations. We conducted several experiments using a comprehensive publication dataset to evaluate our method and determine the impact of using a variety of machine learning algorithms. FutureCite demonstrated its robustness and efficiency and showed promising results based on different evaluation metrics. Using the FutureCite model has significant implications for improving the researchers' ability to determine targeted literature for their research and better understand the potential impact of research publications. [ABSTRACT FROM AUTHOR]

This document is a summary of a journal article titled "Featured Papers on Network Security and Privacy." The article discusses the importance of security-by-design in networks and the need for security to be considered throughout the entire lifecycle of a network. It distinguishes between security and privacy in networks and highlights the Zero Trust approach as a means of increasing network privacy protection. The article also provides an overview of several published articles on network security and privacy, including topics such as cryptographic methods, artificial intelligence (AI) techniques, homoglyph replacement detection, privacy preservation in blockchain technology, trust models, and click fraud detection. The authors emphasize the role of AI and machine learning (ML) in improving network security and protecting network assets. They also discuss the challenges of protecting end devices and propose ML/AI algorithms for mitigating availability threats. Overall, the article highlights the importance of incorporating security and privacy measures in network design and the potential of ML/AI in enhancing network security. [Extracted from the article]

Document classification is an important area in Natural Language Processing (NLP). Because a huge amount of scientific papers have been published at an accelerating rate, it is beneficial to carry out intelligent paper classifications, especially fine-grained classification for researchers. However, a public scientific paper dataset for fine-grained classification is still lacking, so the existing document classification methods have not been put to the test. To fill this vacancy, we designed and collected the PaperNet-Dataset that consists of multi-modal data (texts and figures). PaperNet 1.0 version contains hierarchical categories of papers in the fields of computer vision (CV) and NLP, 2 coarse-grained and 20 fine-grained (7 in CV and 13 in NLP). We ran current mainstream models on the PaperNet-Dataset, along with a multi-modal method that we propose. Interestingly, none of these methods reaches an accuracy of 80% in fine-grained classification, showing plenty of room for improvement. We hope that PaperNet-Dataset will inspire more work in this challenging area. [ABSTRACT FROM AUTHOR]

Since the beginning of the COVID-19 pandemic, many works have been published proposing solutions to the problems that arose in this scenario. In this vein, one of the topics that attracted the most attention is the development of computer-based strategies to detect COVID-19 from thoracic medical imaging, such as chest X-ray (CXR) and computerized tomography scan (CT scan). By searching for works already published on this theme, we can easily find thousands of them. This is partly explained by the fact that the most severe worldwide pandemic emerged amid the technological advances recently achieved, and also considering the technical facilities to deal with the large amount of data produced in this context. Even though several of these works describe important advances, we cannot overlook the fact that others only use well-known methods and techniques without a more relevant and critical contribution. Hence, differentiating the works with the most relevant contributions is not a trivial task. The number of citations obtained by a paper is probably the most straightforward and intuitive way to verify its impact on the research community. Aiming to help researchers in this scenario, we present a review of the top-100 most cited papers in this field of investigation according to the Google Scholar search engine. We evaluate the distribution of the top-100 papers taking into account some important aspects, such as the type of medical imaging explored, learning settings, segmentation strategy, explainable artificial intelligence (XAI), and finally, the dataset and code availability. [ABSTRACT FROM AUTHOR]

The advent of digital technology has revolutionized numerous aspects of modern life, including the field of assessment and testing. However, paper tests, despite their seemingly archaic nature, continue to hold a prominent position in various assessment domains. The accessibility, familiarity, security, cost-effectiveness, and versatility of paper tests collectively contribute to their continued prominence. Hence, numerous educational institutions responsible for conducting examinations involving a substantial number of candidates continue to rely on paper tests. Consequently, there arises a demand for the possibility of automated assessment of these tests, aiming to alleviate the burden on teaching staff, enhance objectivity in evaluation, and expedite the delivery of test results. Therefore, diverse software systems have been developed, showcasing the capability to automatically score specific question types. Thus, it becomes imperative to categorize related question types systematically, thereby facilitating a preliminary classification based on the content and format of the questions. This classification serves the purpose of enabling effective comparison among existing software solutions. In this research paper, we present the implementation of such a software system using artificial intelligence techniques, progressively expanding its capabilities to evaluate increasingly complex question types, with the ultimate objective of achieving a comprehensive evaluation of all question types encountered in paper-based tests. The system detailed above demonstrated a recognition success rate of 99.89% on a curated dataset consisting of 734,825 multiple-choice answers. For the matching type, it achieved a recognition success rate of 99.91% on 86,450 answers. In the case of short answer type, the system achieved a recognition success rate of 95.40% on 129,675 answers. [ABSTRACT FROM AUTHOR]

The paper reports the results of a comparative assessment concerned with the effectiveness of identifying the basic forms of partial discharges (PD) measured by the acoustic emission technique (AE), carried out by application of selected machine learning methods. As part of the re-search, the identification involved AE signals registered in laboratory conditions for eight basic classes of PDs that occur in paper-oil insulation systems of high-voltage power equipment. On the basis of acoustic signals emitted by PDs and by application of the frequency descriptor that took the form of a signal power density spectrum (PSD), the assessment involved the possibility of identifying individual types of PD by the analyzed classification algorithms. As part of the research, the results obtained with the use of five independent classification mechanisms were analyzed, namely: k-Nearest Neighbors method (kNN), Naive Bayes Classification, Support Vector Machine (SVM), Random Forests and Probabilistic Neural Network (PNN). The best results were achieved using the SVM classification tuned with polynomial core, which obtained 100% accuracy. Similar results were achieved with the kNN classifier. Random Forests and Naïve Bayes obtained high accuracy over 97%. Throughout the study, identification algorithms with the highest effectiveness in identifying specific forms of PD were established. [ABSTRACT FROM AUTHOR]

This paper provides a bibliometric analysis of current research trends in the field of artificial intelligence (AI), focusing on key topics such as deep learning, machine learning, and security in AI. Through the lens of bibliometric analysis, we explore publications published from 2020 to 2024, using primary data from the Clarivate Analytics Web of Science Core Collection. The analysis includes the distribution of studies by year, the number of studies and citation rankings in journals, and the identification of leading countries, institutions, and authors in the field of AI research. Additionally, we investigate the distribution of studies by Web of Science categories, authors, affiliations, publication years, countries/regions, publishers, research areas, and citations per year. Key findings indicate a continued growth of interest in topics such as deep learning, machine learning, and security in AI over the past few years. We also identify leading countries and institutions active in researching this area. Awareness of data security is essential for the responsible application of AI technologies. Robust security frameworks are important to mitigate risks associated with AI integration into critical infrastructure such as healthcare and finance. Ensuring the integrity and confidentiality of data managed by AI systems is not only a technical challenge but also a societal necessity, demanding interdisciplinary collaboration and policy development. This analysis provides a deeper understanding of the current state of research in the field of AI and identifies key areas for further research and innovation. Furthermore, these findings may be valuable to practitioners and decision-makers seeking to understand current trends and innovations in AI to enhance their business processes and practices. [ABSTRACT FROM AUTHOR]

This review analyzes the most influential artificial intelligence (AI) studies in health and life sciences from the past three years, delineating the evolving role of AI in these fields. We identified and analyzed the top 50 cited articles on AI in biomedicine, revealing significant trends and thematic categorizations, including Drug Development, Real-World Clinical Implementation, and Ethical and Regulatory Aspects, among others. Our findings highlight a predominant focus on AIs application in clinical settings, particularly in diagnostics, telemedicine, and medical education, accelerated by the COVID-19 pandemic. The emergence of AlphaFold marked a pivotal moment in protein structure prediction, catalyzing a cascade of related research and signifying a broader shift towards AI-driven approaches in biological research. The review underscores AIs pivotal role in disease subtyping and patient stratification, facilitating a transition towards more personalized medicine strategies. Furthermore, it illustrates AIs impact on biology, particularly in parsing complex genomic and proteomic data, enhancing our capabilities to disentangle complex, interconnected molecular processes. As AI continues to permeate the health and life sciences, balancing its rapid technological advancements with ethical stewardship and regulatory vigilance will be crucial for its sustainable and effective integration into healthcare and research. [ABSTRACT FROM AUTHOR]

The rise of the Internet of Things (IoT) has enabled the development of smart cities, intelligent buildings, and advanced industrial ecosystems. When the IoT is matched with machine learning (ML), the advantages of the resulting enhanced environments can span, for example, from energy optimization to security improvement and comfort enhancement. Together, IoT and ML technologies are widely used in smart buildings, in particular, to reduce energy consumption and create Intelligent Energy-Efficient Buildings (IEEBs). In IEEBs, ML models are typically used to analyze and predict various factors such as temperature, humidity, light, occupancy, and human behavior with the aim of optimizing building systems. In the literature, many review papers have been presented so far in the field of IEEBs. Such papers mostly focus on specific subfields of ML or on a limited number of papers. This paper presents a systematic meta-survey, i.e., a review of review articles, that compares the state of the art in the field of IEEBs using the Prisma approach. In more detail, our meta-survey aims to give a broader view, with respect to the already published surveys, of the state-of-the-art in the IEEB field, investigating the use of supervised, unsupervised, semi-supervised, and self-supervised models in a variety of IEEB-based scenarios. Moreover, our paper aims to compare the already published surveys by answering five important research questions about IEEB definitions, architectures, methods/models used, datasets and real implementations utilized, and main challenges/research directions defined. This meta-survey provides insights that are useful both for newcomers to the field and for researchers who want to learn more about the methodologies and technologies used for IEEBs' design and implementation. [ABSTRACT FROM AUTHOR]

With the rapid development and widespread application of blockchain technology in recent years, smart contracts running on blockchains often face security vulnerability problems, resulting in significant economic losses. Unlike traditional programs, smart contracts cannot be modified once deployed, and vulnerabilities cannot be remedied. Therefore, the vulnerability detection of smart contracts has become a research focus. Most existing vulnerability detection methods are based on rules defined by experts, which are inefficient and have poor scalability. Although there have been studies using machine learning methods to extract contract features for vulnerability detection, the features considered are singular, and it is impossible to fully utilize smart contract information. In order to overcome the limitations of existing methods, this paper proposes a smart contract vulnerability detection method based on deep learning and multimodal decision fusion. This method also considers the code semantics and control structure information of smart contracts. It integrates the source code, operation code, and control-flow modes through the multimodal decision fusion method. The deep learning method extracts five features used to represent contracts and achieves high accuracy and recall rates. The experimental results show that the detection accuracy of our method for arithmetic vulnerability, re-entrant vulnerability, transaction order dependence, and Ethernet locking vulnerability can reach 91.6%, 90.9%, 94.8%, and 89.5%, respectively, and the detected AUC values can reach 0.834, 0.852, 0.886, and 0.825, respectively. This shows that our method has a good vulnerability detection effect. Furthermore, ablation experiments show that the multimodal decision fusion method contributes significantly to the fusion of different modalities. [ABSTRACT FROM AUTHOR]

The growing demand for various types of paper highlights the importance of optimizing the kraft pulping process to achieve desired paper properties. This work proposes a novel multiscale model to optimize the kraft pulping process and obtain desired paper properties. The model combines mass and energy balance equations with a layered kinetic Monte Carlo (kMC) algorithm to predict the degradation of wood chips, the depolymerization of cellulose, and the spatio-temporal evolution of the Kappa number and cellulose degree of polymerization ( D P ). A surrogate LSTM-ANN model is trained on data generated from the multiscale model under different operating conditions, dealing with both time-varying and time-invariant inputs, and an LSTM-ANN-based model predictive controller is designed to achieve desired set-point values of the Kappa number and cellulose D P while considering process constraints. The results show that the LSTM-ANN-based controller is able to drive the process to desired set-point values with the use of a computationally faster surrogate model with high accuracy and low offset. [ABSTRACT FROM AUTHOR]

Machine learning (ML) has become increasingly popular in the prediction of debris flow occurrence, but the various ML models utilized as baseline predictors reported in previous studies are typically limited to individual case bases. A comprehensive and systematic evaluation of existing empirical evidence on the utilization of ML as baseline predictors for debris flow occurrence is lacking. To address this gap, we conducted a meta-analysis of ML-based prediction modeling of debris flow occurrence by retrieving papers that were published between 2000 and 2023 from the Scopus and Web of Science databases. The general findings were as follows: (1) A total of 84 papers, distributed across 37 different journals in this time period, reflecting an overall upward trend. (2) Debris flow disasters occur throughout the world, and a total of 13 countries carried out research on the prediction of debris flow occurrence based on ML; China made significant contributions, but more research efforts in African countries should be considered. (3) A total of 36 categories of ML models were utilized as baseline predictors for debris flow occurrence, with logistic regression (LR) and random forest (RF) emerging as the most popular choices. (4) Feature engineering and model comparison were the most commonly utilized strategies in predicting debris flow occurrence based on ML (53 and 46 papers, respectively). (5) Interpretation methods were rarely utilized in predicting debris flow occurrence based on ML, with only 16 papers reporting their utilization. (6) In the prediction of debris flow occurrence based on ML, interpretation methods were rarely utilized, searching by data materials was the most important sample data source, the topographic factors were the most commonly utilized category of candidate variables, and the area under the ROC curve (AUROC) was the most frequently reported evaluation metric. (7) LR's prediction performance for debris flow occurrence was inferior to that of RF, BPNN, and SVM; SVM was comparable to RF, and all superior to BPNN. (8) The application process for the prediction of debris flow occurrence based on ML consisted of three main steps: data preparation, model construction and evaluation, and prediction outcomes. The research gaps in predicting debris flow occurrence based on ML include utilizing new ML techniques and enhancing the interpretability of ML. Consequently, this study contributes both to academic ML research and to practical applications in the prediction of debris flow occurrence. [ABSTRACT FROM AUTHOR]

In traditional construction safety assessment, it is difficult to describe the safety status of different construction stages. To solve this problem, this paper proposes a digital twin modeling theory for construction safety assessment. Firstly, this paper analyzes the requirements of a digital twin model. Secondly, the required information is collected by IoT. Finally, the DT model is established based on the collected information. This DT model analyzes the collected information by ML, which aims to conducting the assessments of construction safety. To verify this method, this paper analyzes the vault settlement during tunnel construction. The analysis results show that the DT model can predict the settlement value with high accuracy. Moreover, the safety state is assessed dynamically based on the settlement value by DT. [ABSTRACT FROM AUTHOR]

Softness is one of the essential properties of hygiene tissue products. Reliably measuring it is of utmost importance to ensure the balance between customer expectations and cost-effective tissue production. This study presents a method for assessing softness by analyzing acoustic emissions produced while tearing a tissue specimen. The aim was to train neural network models using the corrected results of human panel tests as the ground truth labels and to predict the tissue softness in two- and three-class recognition tasks. We also investigate the possibility of predicting some production parameters related to the softness property. The results proved that tissue softness and production parameters could be reliably estimated only by the tearing noise. [ABSTRACT FROM AUTHOR]

Brain stroke, or a cerebrovascular accident, is a devastating medical condition that disrupts the blood supply to the brain, depriving it of oxygen and nutrients. Each year, according to the World Health Organization, 15 million people worldwide experience a stroke. This results in approximately 5 million deaths and another 5 million individuals suffering permanent disabilities. The complex interplay of various risk factors highlights the urgent need for sophisticated analytical methods to more accurately predict stroke risks and manage their outcomes. Machine learning and deep learning technologies offer promising solutions by analyzing extensive datasets including patient demographics, health records, and lifestyle choices to uncover patterns and predictors not easily discernible by humans. These technologies enable advanced data processing, analysis, and fusion techniques for a comprehensive health assessment. We conducted a comprehensive review of 25 review papers published between 2020 and 2024 on machine learning and deep learning applications in brain stroke diagnosis, focusing on classification, segmentation, and object detection. Furthermore, all these reviews explore the performance evaluation and validation of advanced sensor systems in these areas, enhancing predictive health monitoring and personalized care recommendations. Moreover, we also provide a collection of the most relevant datasets used in brain stroke analysis. The selection of the papers was conducted according to PRISMA guidelines. Furthermore, this review critically examines each domain, identifies current challenges, and proposes future research directions, emphasizing the potential of AI methods in transforming health monitoring and patient care. [ABSTRACT FROM AUTHOR]

Construction Engineering and Management (CEM) is a broad domain with publications covering interrelated subdisciplines and considered a key source of knowledge sharing. Previous studies used scientometric methods to assess the current impact of CEM publications; however, there is a need to predict future citations of CEM publications to identify the expected high-impact trends in the future and guide new research efforts. To tackle this gap in the literature, the authors conducted a study using Machine Learning (ML) algorithms and Social Network Analysis (SNA) to predict CEM-related citation metrics. Using a dataset of 93,868 publications, the authors trained and tested two machine learning classification algorithms: Random Forest and XGBoost. Validation of the RF and XGBoost resulted in a balanced accuracy of 79.1% and 79.5%, respectively. Accordingly, XGBoost was selected. Testing of the XGBoost model revealed a balanced accuracy of 80.71%. Using SNA, it was found that while the top CEM subdisciplines in terms of the number of predicted impactful papers are "Project planning and design", "Organizational issues", and "Information technologies, robotics, and automation"; the lowest was "Legal and contractual issues". This paper contributes to the body of knowledge by studying the citation level, strength, and interconnectivity between CEM subdisciplines as well as identifying areas more likely to result in highly cited publications. [ABSTRACT FROM AUTHOR]

Bearing fault diagnosis for equipment-safe operation has a crucial role. In recent years, more achievements have been made in bearing fault diagnosis. However, for the fault diagnosis model, the representation and sensitivity of bearing fault features have a great influence on the diagnosis output results; thus, the attention mechanism is particularly important for the selection of features. However, global attention focuses on all sequences, which is computationally expensive and not ideal for fault diagnosis tasks. The local attention mechanism ignores the relationship between non-adjacent sequences. To address the respective shortcomings of global attention and local attention, an adaptive sparse attention network is proposed in this paper to filter fault-sensitive information by soft threshold filtering. In addition, the effects of different signal representation domains on fault diagnosis results are investigated to filter out signal representation forms with better performance. Finally, the proposed adaptive sparse attention network is applied to cross-working conditions diagnosis of bearings. The adaptive sparse attention mechanism focuses on the signal characteristics of different frequency bands for different fault types. The proposed network model achieves better overall performance when comparing the cross-conditions diagnosis accuracy and model convergence speed. [ABSTRACT FROM AUTHOR]

This research focused on using RGB-D images and modifying an existing machine learning network architecture to generate predictions of the location of successfully grasped objects and to optimize the control system for state delays. A five-finger gripper designed to mimic the human palm was tested to demonstrate that it can perform more delicate missions than many two- or three-finger grippers. Experiments were conducted using the 6-DOF robot arm with the five-finger and two-finger grippers to perform at least 100 actual machine grasps, and compared to the results of other studies. Additionally, we investigated state time delays and proposed a control method for a robot manipulator. Many studies on time-delay systems have been conducted, but most focus on input and output delays. One reason for this emphasis is that input and output delays are the most commonly occurring delays in physical or electronic systems. An additional reason is that state delays increase the complexity of the overall control system. Finally, it was demonstrated that our network can perform as well as a deep network architecture with little training data and omitting steps, such as posture evaluation, and when combined with the hardware advantages of the five-finger gripper, it can produce an automated system with a gripping success rate of over 90%. This paper is an extended study of the conference paper. [ABSTRACT FROM AUTHOR]

The use of generative learning models in natural language processing (NLP) has significantly contributed to the advancement of natural language applications, such as sentimental analysis, topic modeling, text classification, chatbots, and spam filtering. With a large amount of text generated each day from different sources, such as web-pages, blogs, emails, social media, and articles, one of the most common tasks in NLP is the classification of a text corpus. This is important in many institutions for planning, decision-making, and creating archives of their projects. Many algorithms exist to automate text classification tasks but the most intriguing of them is that which also learns these tasks automatically. In this study, we present a new model to infer and learn from data using probabilistic logic and apply it to text classification. This model, called GenCo, is a multi-input single-output (MISO) learning model that uses a collaboration of partial classifications to generate the desired output. It provides a heterogeneity measure to explain its classification results and enables a reduction in the curse of dimensionality in text classification. Experiments with the model were carried out on the Twitter US Airline dataset, the Conference Paper dataset, and the SMS Spam dataset, outperforming baseline models with 98.40%, 89.90%, and 99.26% accuracy, respectively. [ABSTRACT FROM AUTHOR]

Most academic researchers use the academic information system when they want to write a reference, such as a related research for a paper. Specific classification rules are applied based on vast amounts of data and the latest references to classify and search keywords. Meta information is designed for specific classification rules and search results are restructured. The search results can be classified and rearranged to suit academic research paper keywords by applying the restructured classification system and the LDA-based topic modeling technique. To implement this, the ElasticSearch classification method and topic-based LDA model were applied to extract the characteristics of academic papers in this study. Stable topics that could detect topic estimation and keyword search results within the minimum time were extracted to classify the paper search results. In addition, by analyzing the distribution of document weight among topics, the system performance was proven to be excellent. [ABSTRACT FROM AUTHOR]

The sliding window method is commonly used for non-intrusive load disaggregation. However, it is difficult to choose the appropriate window size, and the disaggregation effect is poor in low-frequency industrial environments. To better handle low-frequency industrial load data, in this paper, we propose a vertical non-intrusive load disaggregation model that is different from the sliding window method. By training multiple electrical parameters at a single point on the bus end with the corresponding load data at the branch end, the proposed method, called multiple electrical parameters to point (Mep2point), takes the electrical parameter data sampled at a single point on the bus end as its input and outputs the load data of the target device sampled at the corresponding point. First, the electrical parameters of the bus end are processed, and each item is normalized to the range from 0–1. Then, the electrical parameters are vertically arranged by their time point, and a convolutional neural network (CNN) is used to train the model. The proposed method is analyzed on low-frequency industrial user data sampled at a frequency of 1/120 Hz in the real world. We compare our method with three advanced sliding window methods, achieving an average improvement ranging from 9.23% to 22.51% in evaluation metrics, while showing substantial superiority in the actual decomposed images. Compared with three classical machine learning algorithms, our model, using the same amount of data, significantly outperforms these methods. Finally, we also compared our method with the multi-channel low window sequence-to-point (MLSP) method, which also selects multiple electrical parameters. Our model's complexity is much less than that of the MLSP model, and its performance remains high. The superiority of our model, as presented in this paper, is fully verified by experimental analysis, which can produce better actual load decomposition results from each branch and contribute to the analysis and monitoring of loads in industrial environments. [ABSTRACT FROM AUTHOR]

Signal processing is a very useful field of study in the interpretation of signals in many everyday applications. In the case of applications with time-varying signals, one possibility is to consider them as graphs, so graph theory arises, which extends classical methods to the non-Euclidean domain. In addition, machine learning techniques have been widely used in pattern recognition activities in a wide variety of tasks, including health sciences. The objective of this work is to identify and analyze the papers in the literature that address the use of machine learning applied to graph signal processing in health sciences. A search was performed in four databases (Science Direct, IEEE Xplore, ACM, and MDPI), using search strings to identify papers that are in the scope of this review. Finally, 45 papers were included in the analysis, the first being published in 2015, which indicates an emerging area. Among the gaps found, we can mention the need for better clinical interpretability of the results obtained in the papers, that is not to restrict the results or conclusions simply to performance metrics. In addition, a possible research direction is the use of new transforms. It is also important to make new public datasets available that can be used to train the models. [ABSTRACT FROM AUTHOR]

The paper "Using Absorption Models for Insulin and Carbohydrates and Deep Leaning to Improve Glucose Level Predictions" (Sensors 2021, 21, 5273) proposes a novel approach to predicting blood glucose levels for people with type 1 diabetes mellitus (T1DM). By building exponential models from raw carbohydrate and insulin data to simulate the absorption in the body, the authors reported a reduction in their model's root-mean-square error (RMSE) from 15.5 mg/dL (raw) to 9.2 mg/dL (exponential) when predicting blood glucose levels one hour into the future. In this comment, we demonstrate that the experimental techniques used in that paper are flawed, which invalidates its results and conclusions. Specifically, after reviewing the authors' code, we found that the model validation scheme was malformed, namely, the training and test data from the same time intervals were mixed. This means that the reported RMSE numbers in the referenced paper did not accurately measure the predictive capabilities of the approaches that were presented. We repaired the measurement technique by appropriately isolating the training and test data, and we discovered that their models actually performed dramatically worse than was reported in the paper. In fact, the models presented in the that paper do not appear to perform any better than a naive model that predicts future glucose levels to be the same as the current ones. [ABSTRACT FROM AUTHOR]

The papers range from the theoretical ones, the paper applying the models, to the papers providing software tools for causal inference. B Instrumental variable in causal inference. b Papers [[1], [3]] investigate models using instrumental variable in causal inference. The present Special Issue of Entropy, entitled "Causal Inference for Heterogeneous Data and Information Theory", covers various aspects of causal inference. In the first step, the treatment and outcome are modeled to incorporate the potential confounders, and in the second step, the predictions are inserted into the ATE estimators such as the Augmented Inverse Probability Weighting (AIPW) estimator, based on neural networks (NN). [Extracted from the article]

Biosensors are devices composed of a biorecognition part and of a transduction part. A review is conducted on the progress of the use of low-cost sensors in healthcare monitoring, the algorithms used to process sensor data and the wireless communication techniques [[11]]. [Extracted from the article]

Federated learning (FL) is a scheme in which several consumers work collectively to unravel machine learning (ML) problems, with a dominant collector synchronizing the procedure. This decision correspondingly enables the training data to be distributed, guaranteeing that the individual device's data are secluded. The paper systematically reviewed the available literature using the Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) guiding principle. The study presents a systematic review of appliable ML approaches for FL, reviews the categorization of FL, discusses the FL application areas, presents the relationship between FL and Blockchain Technology (BT), and discusses some existing literature that has used FL and ML approaches. The study also examined applicable machine learning models for federated learning. The inclusion measures were (i) published between 2017 and 2021, (ii) written in English, (iii) published in a peer-reviewed scientific journal, and (iv) Preprint published papers. Unpublished studies, thesis and dissertation studies, (ii) conference papers, (iii) not in English, and (iv) did not use artificial intelligence models and blockchain technology were all removed from the review. In total, 84 eligible papers were finally examined in this study. Finally, in recent years, the amount of research on ML using FL has increased. Accuracy equivalent to standard feature-based techniques has been attained, and ensembles of many algorithms may yield even better results. We discovered that the best results were obtained from the hybrid design of an ML ensemble employing expert features. However, some additional difficulties and issues need to be overcome, such as efficiency, complexity, and smaller datasets. In addition, novel FL applications should be investigated from the standpoint of the datasets and methodologies. [ABSTRACT FROM AUTHOR]

Among the activities that burden capital in the supply chain of forest-based industries, the activity of road transport of wood deserves to be highlighted. Machine learning techniques are applied the knowledge extracted from real data, and support strategies that aim to maximize the resources destined for it. Based on variables inherent to the wood transport activity, we verified whether machine learning models can act as predictors of the volume of wood to be transported and support strategic decision-making. The database came from companies in the pulp and paper segments, which totaled 26,761 data instances. After the data wrangling process, machine learning algorithms were used to build models, which were optimized from the hyperparameter adjustment and selected to compose the blended learning hierarchy. In addition to belonging to different methodological basis, a CatBoost Regressor, Decision Tree Regressor, and K Neighbors Regressor were selected mainly for providing minimal values to errors metrics and maximal values to determination coefficient. The learning by stack stands out, with a coefficient of determination of 0.70 and an average absolute percentage error of 6% in the estimation of the volume of wood to be transported. Based on variables inherent to the wood transport process, we verified that machine learning models can act in the prediction of the volume of wood to be transported and support strategic decision-making. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue on advanced machine learning and deep learning techniques for remote sensing. The issue includes 16 research papers that cover a range of topics, including hyperspectral image classification, moving point target detection, radar echo extrapolation, and remote sensing object detection. Each paper introduces a novel approach or model and provides extensive testing and evaluation to demonstrate its effectiveness. The insights shared in this special issue are expected to contribute to future advancements in artificial intelligence-based remote sensing research. [Extracted from the article]

Fake news is an explosive subject, being undoubtedly among the most controversial and difficult challenges facing society in the present-day environment of technology and information, which greatly affects the individuals who are vulnerable and easily influenced, shaping their decisions, actions, and even beliefs. In the course of discussing the gravity and dissemination of the fake news phenomenon, this article aims to clarify the distinctions between fake news, misinformation, and disinformation, along with conducting a thorough analysis of the most widely read academic papers that have tackled the topic of fake news research using various machine learning techniques. Utilizing specific keywords for dataset extraction from Clarivate Analytics' Web of Science Core Collection, the bibliometric analysis spans six years, offering valuable insights aimed at identifying key trends, methodologies, and notable strategies within this multidisciplinary field. The analysis encompasses the examination of prolific authors, prominent journals, collaborative efforts, prior publications, covered subjects, keywords, bigrams, trigrams, theme maps, co-occurrence networks, and various other relevant topics. One noteworthy aspect related to the extracted dataset is the remarkable growth rate observed in association with the analyzed subject, indicating an impressive increase of 179.31%. The growth rate value, coupled with the relatively short timeframe, further emphasizes the research community's keen interest in this subject. In light of these findings, the paper draws attention to key contributions and gaps in the existing literature, providing researchers and decision-makers innovative viewpoints and perspectives on the ongoing battle against the spread of fake news in the age of information. [ABSTRACT FROM AUTHOR]

Violence, a pervasive societal concern, demands innovative approaches for its early detection and prevention. This review paper explores the intersection of violence detection and wireless fidelity (Wi-Fi), alongside fifth-generation (5G) and sixth-generation (6G) mobile technologies. Wi-Fi sensing, initially employed for human activity detection, has also demonstrated versatility across a number of other important applications. The significance of leveraging Wi-Fi sensing for violence detection is investigated, underscoring its ability to enhance security protocols and minimise response time. Moreover, through the development and use of machine learning algorithms to analyse and interpret intricate channel state information (CSI) features, the accuracy of violence detection can be improved. Furthermore, this investigation delves into the rapidly developing domain of mobile sensing, examining its contribution to the advancement of violence detection functionalities. The potential convergence of 5G and forthcoming 6G sensing technologies increases the effectiveness of violence detection. Through an analysis of Wi-Fi and mobile sensing technologies, this review paper highlights the transformative capacity that their integration may have on approaches to violence prevention and response. [ABSTRACT FROM AUTHOR]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

The urban heat island (UHI) is a crucial factor in developing sustainable cities and societies. Appropriate data collection, analysis, and prediction are essential first steps in studying the effects of the UHI. This research systematically reviewed the papers related to the UHI that have used on-site data collection in the United States and Canada and the papers related to predicting and analyzing this effect in these regions. To achieve this goal, this study extracted 330 articles from Scopus and Web of Science and, after selecting the papers, reviewed 30 papers in detail from 1998 to 2023. The findings of this paper indicated a methodological shift from traditional sensors and data loggers towards more innovative and customized technologies. Concurrently, this research reveals a growing trend in using machine learning, moving from supportive to direct predictive roles and using techniques like neural networks and Bayesian networks. Despite the maturation of UHI research due to these developments, they also present challenges in technology complexity and data integration. The review emphasizes the need for future research to focus on accessible, accurate technologies. Moreover, interdisciplinary approaches are crucial for addressing UHI challenges in an era of climate change. [ABSTRACT FROM AUTHOR]

This paper presents the design and implementation of a system for semi-automating the literature review process based on machine learning. By using machine learning algorithms, the system determines whether scientific papers belong to the topic that is being explored as part of the review process. The system's user interface allows the process of creating a literature review to be managed through a series of steps: selecting data sources, building queries and topic searches, displaying the scientific papers found, selecting papers that belong to the set of desired papers, running machine learning algorithms for learning and automated classification, and displaying and exporting the final set of papers. Manual literature reviews are compared with automated reviews, and similarities and differences between the two approaches in terms of duration, accuracy, and ease of use are discussed. This study concludes that the best results in terms of sensitivity and accuracy for the automated literature review process are achieved by using a combined machine learning model, which uses multiple unweighted machine learning models. Cross-testing the models on two alternative datasets revealed an overlap in the machine learning hyperparameters. The stable sensitivity and accuracy in the tests indicate the potential for generalized use in automated literature review. [ABSTRACT FROM AUTHOR]

This document discusses the recent advancements in decision support systems (DSSs) for disease detection and diagnosis. The combination of biomedical studies and information technology has led to the development of accessible and accurate solutions that can improve patient survival rates. The document highlights several research papers that cover a wide range of topics, including multiple sclerosis detection, neurodegenerative disease detection, breast lesion classification, COVID-19 mortality prediction, melanoma diagnosis, and prediction of second primary skin cancer. The adoption of efficient DSSs can aid clinical assessment, reduce misdiagnosis, and facilitate evidence-based decision-making. However, challenges such as validation, training, and user interface design need to be addressed for widespread application of DSSs in clinical practice. The document concludes by emphasizing the importance of future studies and developments in overcoming limitations and expanding the use of DSSs in different contexts. [Extracted from the article]

Albeit in different ways, both machine learning and gamification have transfigured the user experience of information systems. Although both are hot research topics, so far, little attention has been paid to how these two technologies converge with each other. This relation is not obvious as while it is feasible to enhance gamification with machine learning, it is also feasible to support machine learning with gamification; moreover, there are applications in which machine learning and gamification are combined yet not directly connected. In this study, we aim to shed light on the use of both machine learning in gamification and gamification in machine learning, as well as the related topics of using gamification in machine learning education and machine learning in gamification research. By performing a systematic literature mapping, we not only identify prior works addressing these respective themes, but also analyze how their popularity evolved in time, investigate the areas of application reported by prior works, used machine learning techniques and software tools, as well as the character of research contribution and the character of evaluation results for works that presented them. [ABSTRACT FROM AUTHOR]

Given the importance of young children's postures and movements to health and development, robust objective measures are required to provide high-quality evidence. This study aimed to systematically review the available evidence for objective measurement of young (0–5 years) children's posture and movement using machine learning and other algorithm methods on accelerometer data. From 1663 papers, a total of 20 papers reporting on 18 studies met the inclusion criteria. Papers were quality-assessed and data extracted and synthesised on sample, postures and movements identified, sensors used, model development, and accuracy. A common limitation of studies was a poor description of their sample data, yet over half scored adequate/good on their overall study design quality assessment. There was great diversity in all aspects examined, with evidence of increasing sophistication in approaches used over time. Model accuracy varied greatly, but for a range of postures and movements, models developed on a reasonable-sized (n > 25) sample were able to achieve an accuracy of >80%. Issues related to model development are discussed and implications for future research outlined. The current evidence suggests the rapidly developing field of machine learning has clear potential to enable the collection of high-quality evidence on the postures and movements of young children. [ABSTRACT FROM AUTHOR]

Over the past years, machine learning and big data analysis have emerged, starting as a scientific and fictional domain, very interesting but difficult to test, and becoming one of the most powerful tools that is part of Industry 5.0 and has a significant impact on sustainable, resilient manufacturing. This has garnered increasing attention within scholarly circles due to its applicability in various domains. The scope of the article is to perform an exhaustive bibliometric analysis of existing papers that belong to machine learning and big data, pointing out the capability from a scientific point of view, explaining the usability of applications, and identifying which is the actual in a continually changing domain. In this context, the present paper aims to discuss the research landscape associated with the use of machine learning and big data analysis in Industry 5.0 in terms of themes, authors, citations, preferred journals, research networks, and collaborations. The initial part of the analysis focuses on the latest trends and how researchers lend a helping hand to change preconceptions about machine learning. The annual growth rate is 123.69%, which is considerable for such a short period, and it requires a comprehensive analysis to check the boom of articles in this domain. Further, the exploration investigates affiliated academic institutions, influential publications, journals, key contributors, and most delineative authors. To accomplish this, a dataset has been created containing researchers' papers extracted from the ISI Web of Science database using keywords associated with machine learning and big data, starting in 2016 and ending in 2023. The paper incorporates graphs, which describe the most relevant authors, academic institutions, annual publications, country collaborations, and the most used words. The paper ends with a review of the globally most cited documents, describing the importance of machine learning and big data in Industry 5.0. [ABSTRACT FROM AUTHOR]

The Journal of Functional Morphology & Kinesiology (JFMK) is a valuable resource for exploring the present and future of human movement analysis. It traces the history of human movement study from Aristotle to modern times, highlighting the integration of anatomy, physiology, and biomechanics. The journal emphasizes the symbiosis of technology and kinesiology, which has led to advancements in personalized interventions and tailored treatments. It also discusses emerging technologies, such as artificial intelligence, that are redefining our understanding of human movement. JFMK aims to publish papers that have a direct impact on healthcare, patient well-being, and athletes, and it strives to bridge the gap between theoretical exploration and practical application. The journal has achieved recognition and high rankings in various research fields, and it continues to grow and enhance its impact. Looking forward to 2024, JFMK plans to increase visibility, establish media partnerships, and improve processing times. The journal encourages contributions from authors and proposals for special issues. Overall, JFMK is committed to advancing scientific understanding and improving the quality of life through its research on functional morphology and kinesiology. [Extracted from the article]

We present a rotational terahertz imaging system for inline nondestructive testing (NDT) of press sleeves for the paper industry during fabrication. Press sleeves often consist of polyurethane (PU) which is deposited by rotational molding on metal barrels and its outer surface mechanically processed in several milling steps afterwards. Due to a stabilizing polyester fiber mesh inlay, small defects can form on the sleeve's backside already during the initial molding, however, they cannot be visually inspected until the whole production processes is completed. We have developed a fast-scanning frequenc-modulated continuous wave (FMCW) terahertz imaging system, which can be integrated into the manufacturing process to yield high resolution images of the press sleeves and therefore can help to visualize hidden structural defects at an early stage of fabrication. This can save valuable time and resources during the production process. Our terahertz system can record images at 0.3 and 0.5 THz and we achieve data acquisition rates of at least 20 kHz, exploiting the fast rotational speed of the barrels during production to yield sub-millimeter image resolution. The potential of automated defect recognition by a simple machine learning approach for anomaly detection is also demonstrated and discussed. [ABSTRACT FROM AUTHOR]

Paper [[14]] proposed a response surface method to further improve the accuracy of alignment prediction for large-span steel-concrete composite beam track cable-stayed bridges. Paper [[5]] investigated the effect of pile foundation cutting and under-pinning processes on the stability of bridge substructures during shield tunneling. They utilized numerical simulations and on-site monitoring to study how the active underpinning process of shield tunneling pile foundations affected bridge substructure deformations. [Extracted from the article]

This paper proposes a solution to the problem of mobile robot navigation and trajectory interpolation in dynamic environments with large scenes. The solution combines a semantic laser SLAM system that utilizes deep learning and a trajectory interpolation algorithm. The paper first introduces some open-source laser SLAM algorithms and then elaborates in detail on the general framework of the SLAM system used in this paper. Second, the concept of voxels is introduced into the occupation probability map to enhance the ability of local voxel maps to represent dynamic objects. Then, in this paper, we propose a PointNet++ point cloud semantic segmentation network combined with deep learning algorithms to extract deep features of dynamic point clouds in large scenes and output semantic information of points on static objects. A descriptor of the global environment is generated based on its semantic information. Closed-loop completion of global map optimization is performed to reduce cumulative error. Finally, T-trajectory interpolation is utilized to ensure the motion performance of the robot and improve the smooth stability of the robot trajectory. The experimental results indicate that the combination of the semantic laser SLAM system with deep learning and the trajectory interpolation algorithm proposed in this paper yields better graph-building and loop-closure effects in large scenes at SIASUN large scene campus. The use of T-trajectory interpolation ensures vibration-free and stable transitions between target points. [ABSTRACT FROM AUTHOR]

This document is a collection of research papers on various topics related to cybersecurity. The papers cover a range of subjects, including mapping vulnerabilities to defense strategies, countermeasures for cybersecurity challenges in higher education, identifying malware packers, the role of blockchain technology in manufacturing, text-to-image synthesis, predicting cybersecurity attacks on IoT, enhancing data security in BYOD environments, encryption schemes for IoT systems, usable security, and an analysis of the ChatGPT language model. Each paper presents its findings and proposes solutions to address specific cybersecurity issues. The document aims to raise awareness and improve mitigation efforts against cyber threats, emphasizing the importance of collaboration between businesses and law enforcement agencies. [Extracted from the article]

The fire heat release rate (HRR) is a crucial parameter for describing the combustion process and its thermal effects. In recent years, some studies have employed fire scene images and deep learning algorithms to predict real-time fire HRR, which has led to the advancement of HRR prediction in terms of both lightweightness and real-time monitoring. Nevertheless, the development of an early-stage monitoring system for fires and the ability to predict future HRR based on current moment data represents a crucial foundation for evaluating the scale of indoor fires and enhancing the capacity to prevent and control such incidents. This paper proposes a deep learning model based on continuous fire scene images (containing both flame and smoke features) and their time-series information to predict the future transient fire HRR. The model (Att-BiLSTM) comprises three bi-directional long- and short-term memory (Bi-LSTM) layers and one attention layer. The model employs a bidirectional feature extraction approach, followed by the introduction of an attention mechanism to highlight the image features that have a critical impact on the prediction results. In this paper, a large-scale dataset is constructed by collecting 27,231 fire scene images with instantaneous HRR annotations from 40 different fire trials from the NIST database. The experimental results demonstrate that Att-BiLSTM is capable of effectively utilizing fire scene image features and temporal information to accurately predict future transient HRR, including those in high-brightness fire environments and complex fire source situations. The research presented in this paper offers novel insights and methodologies for fire monitoring and emergency response. [ABSTRACT FROM AUTHOR]

In today's world, a significant amount of global energy is used in buildings. Unfortunately, a lot of this energy is wasted, because electrical appliances are not used properly or efficiently. One way to reduce this waste is by detecting, learning, and predicting when people are present in buildings. To do this, buildings need to become "smart" and "cognitive" and use modern technologies to sense when and how people are occupying the buildings. By leveraging this information, buildings can make smart decisions based on recently developed methods. In this paper, we provide a comprehensive overview of recent advancements in Internet of Things (IoT) technologies that have been designed and used for the monitoring of indoor environmental conditions within buildings. Using these technologies is crucial to gathering data about the indoor environment and determining the number and presence of occupants. Furthermore, this paper critically examines both the strengths and limitations of each technology in predicting occupant behavior. In addition, it explores different methods for processing these data and making future occupancy predictions. Moreover, we highlight some challenges, such as determining the optimal number and location of sensors and radars, and provide a detailed explanation and insights into these challenges. Furthermore, the paper explores possible future directions, including the security of occupants' data and the promotion of energy-efficient practices such as localizing occupants and monitoring their activities within a building. With respect to other survey works on similar topics, our work aims to both cover recent sensory approaches and review methods used in the literature for estimating occupancy. [ABSTRACT FROM AUTHOR]