Search

Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned. The focal research reports a completely biodegradable all cellulose composite filter paper (ACCFP) composed of I-cellulose macrofibers and II-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper (PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of II-cellulose hydrogel and I-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water (oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.

In this research, I established an energy benchmark for the pulp and paper industry of Vietnam. I, therefore, focus on three major paper product families, including packaging paper, printing and writing paper, and tissue paper. In this research, I use specific energy consumption (SEC) as the energy performance indicator (EnPI) for computing energy benchmarks for the main sub-sectors in the pulp and paper industry of Vietnam. The factories in the pulp and paper industry of Vietnam are divided into three production scales, and the energy benchmarks are specified by production scales. Energy surveys and energy audits have been used to calculate energy benchmarks. Here, I establish the energy benchmark for the main sub-sectors in the pulp and paper industry of Vietnam according to the three production scales. I also estimate the energy saving potential for the pulp and paper industry of Vietnam based on surveying and auditing results.

Low-cost, flexible and safe battery technology is the key to the widespread usage of wearable electronics, among which the aqueous Al ion battery with water-in-salt electrolyte is a promising candidate. In this work, a flexible aqueous Al ion battery is developed using cellulose paper as substrate. The water-in-salt electrolyte is stored inside the paper, while the electrodes are either printed or attached on the paper surface, leading to a lightweight and thin-film battery prototype. Currently, this battery can tolerate a charge and discharge rate as high as 4 A g−1 without losing its storage capacity. The charge voltage is around 2.2 V, while the discharge plateau of 1.6–1.8 V is among the highest in reported aqueous Al ion batteries, together with a high discharge specific capacity of ∼140 mAh g−1. However, due to the water electrolysis side reaction, the faradaic efficiency can only reach 85% with a cycle life of 250 due to the dry out of electrolyte. Benefited from using flexible materials and aqueous electrolyte, this paper-based Al ion battery can tolerate various deformations such as bending, rolling and even puncturing without losing its performance. When two single cells are connected in series, the battery pack can provide a charge voltage of 4.3 V and a discharge plateau as high as 3–3.6 V, which are very close to commercial Li ion batteries. Such a cheap, flexible and safe battery technology may be widely applied in low-cost and large-quantity applications, such as RFID tags, smart packages and wearable biosensors in the future.

The increased demand for energy due to industrialisation and a steadily growing population has placed greater strain on the development of eco-friendly energy storage devices in recent years. Current methods with high efficiency are limited by high costs and waste. As a result, greater importance has been placed on the development of low-cost, lightweight, flexible, and biodegradable energy storage systems developed from paper and paper-like substrates. This study reviews recent advances in paper-based battery and supercapacitor research, with a focus on materials used to improve their electrochemical performance. Special mention is made of energy-storage configurations ranging from metal-air and metal-ion batteries to supercapacitors. Furthermore, methods of fabrication, functional materials, and efficiency are reviewed to offer prospects for future research into the field of paper-based Na-ion batteries. The review provides an updated discussion of recent research conducted in the field of paper-based energy systems published over the last five years and highlights the challenges for their commercial integration prospects.

Energy viability and waste disposal have been the two significant global complication. The consumption of paper and, subsequently, recycling are increasingly growing, contributing to vast quantities of paper sludge. Therefore, in waste disposal and environmental remediation, coping with massive volumes of paper sludge has received tremendous attention worldwide. Our purpose was to assess leading study advancements globally of paper sludge based on articles published, authors intra/inter-collaborations and accumulations of keywords. Throughout entire 1967–2019 duration, 2096 publications in paper sludge topic were mined using Scopus database. The findings revealed that the number of publications was less than 30 between 1967 and 1995, less than 60 between 1996 and 2005, less than 90 between 2006 and 2010 and more than 90 between 2011 and the recent year. Consequently, the yearly publishing is forecast to keep to expand. In a total of 125 journals, a total of 217 Canadian scholars from 155 universities lead to 263 papers, comprising 10.8 % total publications, where 261 (99.2 %) of 263 total English-language publications dominate the other countries/territories, while 0.8 % in French language. Also, from each of the 15 top countries, among the most productive universities, Université Laval was ranked 251st in World University Rankings 2021. In review, the following present developments in paper sludge comprise of: (i) cement, cellulose, bioethanol/biogas and concrete; (ii) phytoremediation and vermicompost and (iii) modelling (e.g., response surface methodology).

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

Climate change as a matter had little attention of public debate, especially in developing countries, until the recent floods caused by the dragon storms in the Middle East and the forest fires in the Mediterranean. Egypt, being strategically crucial in Africa, the Mediterranean, and the Arab world, with strong connections to other countries, aimed to go from promises to action and to discover real answers to climate change by building on past COPs. The administration assumed a more prominent role by coordinating the 27th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP27). People started to realize that this is not something only happening elsewhere in the world. Egypt took the initiative; Challenges have been assessed to reach suitable mitigation approaches, and Egypt's first NDC has been issued to meet the global agenda. Egypt's vision was to accelerate global climate action at the UNFCCC 27th Conference of the Parties (COP 27) through emissions reduction, advanced adaptation, and enhanced flow of appropriate finance, prioritizing developing countries worldwide.

The insulation of an oil-filled transformer is based on materials of organic origin - oil and wood pulp. The state of insulation is a key factor in the reliable operation of a power equipment, and much attention is paid to the insulation state assessment by researchers. To assess the cellulose insulation state, indicators such as the degree of polymerization and paper moisture are deter-mined. The existing methods for determining the moisture content and the degree of polymeriza-tion of a paper insulation have disadvantages, as they require a complex process of sampling the insulation, which is a time-consuming operation. The purpose of the work is to develop new methods for determining the moisture content and the degree of polymerization of the paper in-sulation of a power transformer. This goal is achieved by obtaining the reflection spectra of the paper insulation samples and constructing two correlation lines to determine the degree of polymerization and humidity. The most significant result of the article is the establishment of the dependence of the reflection coefficient of the paper on the concentration of water exceeding 4% and the position of the minimum in the reflection spectrum of paper insulation on the degree of polymerization. The significance of the obtained results lies in the fact that the optical method for determining the moisture content and the degree of polymerization of paper insulation using the constructed correlation lines is highly accurate and does not require the use of additional re-agents and complex calculations.

Paper sludge is the water treatment waste, which produced during paper production. Paper sludge (PS) waste utilization is the common problem in the EU and internationally. According to the waste management directive No. 2008/98/EC, paper sludge waste should not be utilized in landfills. In the European Union, alone 93 million tons of PS generated yearly. Nowadays most of the paper sludge waste used as fuel for incineration power plants (up to 55 %). According to waste management legislation such waste management should be avoided as well. Very small portion (10 %) of PS is used in construction sector. In construction, paper sludge used as additive in concrete composite materials. Such legislation of waste management generates the motivation of this study. In this study authors propose to produce composite panels in which PS is the main material of composite. As the binding material, clay proposed due to its good binding properties and therefore its natural material. Such produced panels proposed to use it for sound absorption applications. To determine composites sound absorption coefficient standard ISO 10534-2 method was used. The sound absorption coefficient in different octave bands reached up to 0.59.

Abstract Nickel nanoparticles supported by commercial carbon paper (CP) are prepared by pulsed laser deposition with deposition time of 3, 6, and 12 min as a catalyst for urea electro-oxidation. The surface conditions and the morphologies of the prepared electrodes have been characterized by Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Urea electro-oxidation reaction in KOH solution on the Ni/CP electrodes is investigated by cyclic voltammetry and chronoamperometry. The results show that the electrode with less Ni nanoparticle agglomeration shows higher peak current density, which was achieved in the 3 min deposition samples when normalized by electroactive surface areas. However, the highest current normalized by the area of the carbon paper was achieved in the 6 min deposition sample due to the larger quantity of Ni nanoparticles. All the samples show good stability. Our results suggest that the low density, low cost, and environmental friendly CP can be used as support for Ni nanoparticle as a catalyst for urea electro-oxidation. It thus has great potential for many applications involving urea oxidation, such as wastewater treatments.

Paper waste is a raw material for a lot of products with different added value. The engineering, economic and environmental aspects of paper waste recycling are analysed for production of composite material, cellulose nanofibers and nanocrystals, bricks with paper components, porous carbon, film of biopolymer, enzymatic sugar and bioenergy: bioethanol, hydrogen and biofuel. Through multicriteria analysis, it was possible to determine the most feasible paper waste recycling product in case of four product groups: egg packaging boxes, cardboard, reused paper, cellulose nanomaterials (nanofibers and nanocrystals). The production of cellulose nanofibres and cellulose nanocrystals has an advantage over egg packaging and cardboard production as well as reusable paper.

In the present study, Ti3C2Tx type MXene was prepared by selective etching of Al from Ti3AlC2 with mesh size of 200. The powder form of raw material was used to fabricate Ti3C2Tx by in-situ HF etching method. The MXene is further coated on non-woven paper by simply dip coating method. The detailed structural, morphology and elemental content study of as prepared Ti3C2Tx MXene have demonstrated. The MXene (Ti3AlC2) powders show compact, layered morphology as expected for bulk layered ternary carbide. The detailed elemental analysis has carried out for Titanium carbide based MXene coated and uncoated woven paper. The lower conducting property obtained for paper coating due less amount of coating in the surface of paper instead of coating on glass substrate. The electrical property characterization of MXene coated non-woven paper and glass substrate have also been studied. Hence, the conductive coating of MXene-in water formulation achieved through simple dip coating methods is promising for low cost sensor, wearable shielding device fabrication towards renewable energy and healthcare applications. [ABSTRACT FROM AUTHOR]

Valorisation involves conversion of toxic compounds into value added products. The present study has tried to evaluate the potential of vermicomposting in management of different types of toxic paper mill wastes such as primary waste (VCP) and secondary waste (VCS) using Eisenia fetida for 60 days. The procedure was performed using sundried samples of paper mill wastes, cow dung and straw in different trial sets using different ratios. The study had revealed that the trial sets (VCP1 and VCS1) using ratio of paper mill waste: Cow dung: Straw (5:4:1) were effective in maintaining physiochemical parameters and different population attributes of earthworm. The present study had also demonstrated the enzymatic enrichment of vermicompost in terms of 19 enzymes such as α-Glucosidase, lipase, leucine aminopeptidase etc. in maintenance of C/N ratio of the compost. A significant reduction of heavy metals were noticed in vermicomposting of primary waste (VCP1) as Zn (40%) ​> ​Pb (36%) ​> ​Cr (28%) ​> ​Cu (25%) and secondary waste (VCS1) as Zn (44%) ​> ​Pb (41%) ​> ​Cu (19%) ​> ​Cr (13%). Such reduction of heavy metal was highly correlated with the reduction of C/N ratio of the vermicompost. The process of bioremediation was further manifested through the regular monitoring of bioaccumulation factor (BAF) among earthworm population in vermicomposting of primary waste (VCP1) as Zn (0.40) ​> ​Cu (0.23) ​> ​Cr (0.18) ​> ​Pb (0.11) and secondary waste (VCS1) as Zn (0.47) ​> ​Cu (0.25) ​> ​Cr (0.21) ​> ​Pb (0.14). Therefore, the study concludes that the ratio of paper mill waste, cow dung and straw (5:4:1) can be an efficient formulation in qualitative enrichment of different toxic organic paper mill wastes through vermicomposting.

Green production of functional nano-oxides on a large scale is crucial for the modern manufacturing industries. Traditional hydrothermal methods and ball milling are usually time-consuming and require long-term energy input with undesired by-products. Herein, an ultrafast laser-induced high-pressure photochemistry manufacturing technique is developed to massively produce planar-aligned graphene-coated two-dimensional (2D) SnO2 nanoplatelet on carbon nanotube (CNT) paper under the green chemistry guidelines. The unique design of Z-axis confinement added to the ultrafast laser irradiation provides an exceptional high temperature of 1772 K and a high pressure of 24 GPa in the localized laser plasma plume. This transient nonequilibrium condition controls the formation of 2D SnO2, and the ablated C atoms cool down afterward as in-situ “glue” to intactly seal the oxides on the CNT substrate. The resultant hierarchical Graphene@2D SnO2@CNT paper anode for Li-ion battery has an outstanding capacity of 819 mAh g−1 (1637 mAh cm−3) at 0.5 A g−1 and retains 622 mAh g−1 (1245 mAh cm−3) at 5.0 A g−1. The high capacity at 0.5 A g−1 has a retention of 92% after 600 cycles. This work provides an environmental-friendly scalable manufacturing technique to produce functional nanocomposites in 1 step.

Abstract Herein, a fully paper‐based all‐solid‐state supercapacitor with functionalized cellulose paper as electrodes, carboxymethyl cellulose gel as solid electrolyte and cellulose paper as separator was fabricated. The electrode was fabricated by a conventional papermaking process with silver‐modified fibers and graphene oxide (GO)‐modified fibers followed by reduction of GO. The Ag‐modified fibers and GO‐modified fibers were obtained by in situ growth of Ag nanoparticles and self‐assembly of GO sheets on cellulose fibers, respectively. Ag‐modified fibers act as a flexible current collector with rich three‐dimensional interconnected electron transport pathways to make the reduced GO‐modified fibers as electrode materials to achieve high conductivity (1.93 Ω sq−1) and high‐rate capability. Simple drying can reduce 40% weight of the supercapacitor to facilitate transportation and storage, and its capacitance efficiency can be recovered by wetting when needed. This work opens up a new way of developing cheap, green and high performance full‐paper flexible electronics by conventional papermaking process.

Abstract Freestanding films with high strength and conductivity are critical for flexible electronics, such as supercapacitors. Herein, inspired from the natural leaf, a freestanding paper is constructed through fast vacuum filtration by “mesophylls‐like” MXene (Ti3C2TX) nanosheets and “vein‐like” cellulose filaments and silver nanowires (Ag NWs). The produced nanocomposite paper with 25 wt% Ti3C2TX and 8 wt% Ag NWs (PMxAg25‐8) exhibits high conductivity (58 843 S m−1) and excellent mechanical properties (Tensile strength of 34 MPa and Young's modulus of 6 GPa), which arises from the synergistic effects of the interactions between cellulose and MXene and the three‐dimensional interpenetrating frameworks. This interpenetrating framework can further benefit the electrochemical performance of the nanocomposite papers and the foldable paper electrode presents a high capacitance of 505 F g−1 with only 25 wt% MXene. This work paves the way for the fast fabrication of strong and multifunctional MXene macro‐assembly for flexible electronics by conventional papermaking process.

Paper and pulp manufacturing industry produces versatile products from renewable feedstock that are easily recycled. It is the fourth largest industrial sector in terms of energy use. Much of the energy used comes from biomass derived fuels or high efficiency combined heat and power plants so the industry is not considered as carbon intensive. But at production paper making emits five times the CO2/tonne of steel; this is gradually removed from the atmosphere by the growth of replacement trees which can take between 7 and 90 years. This study reviewed existing literature to establish estimates for future energy requirements, and way that these could be met with minimum carbon emissions in a world where there are electricity grids with low carbon intensities, high recycling rates and growing demand for sustainable biomass. It was found that energy consumption could be reduced by 20% using technologies that have been demonstrated at an industrial scale. Most virgin pulp is made using the kraft chemical processing method. It was found that it should be possible to eliminate all fossil fuel use from this process, by combustion of by-product while exporting a small amount of electricity. Recycled paper is becoming the largest source of pulp. In this case the waste streams cannot provide sufficient energy to power the process, but process heat can be produced by burning some of the collected waste paper in steam plants or by using electric heat pumps. The energy needed to produce high quality office paper is nearly twice that required for non-deinked packaging paper. This couples with the lower pulp yields obtained with high quality pulp means that the environmentally preferred option for energy supply to the recycling process is dependent on the grade of pulp being produced.

Environmentally friendly and energy saving treatment of black liquor (BL), a massively produced waste in Kraft papermaking process, still remains a big challenge. Here, by adopting a NiCaOCa12Al14O33 bifunctional catalyst derived from hydrotalcite-like materials, we demonstrate the feasibility of producing high-purity H2 (∼96%) with 0.9 mol H2 mol−1 C yield via the sorption enhanced steam reforming (SESR) of BL. The SESRBL performance in terms of H2 production maintained stable for 5 cycles, but declined from the 6th cycle. XRD, Raman spectroscopy, elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst. It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL, while deposition of Na and K from the BL might also be responsible for the declined performance. On the other hand, it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO3. Our results highlight a promising alternative for BL treatment and H2 production, thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.

Synthetic styrene-butadiene (SB) and styrene-acrylic (SA) latex binders used in paper coating formulations are common and based on unsustainable petroleum sources. Today's papermaking industry turns towards sustainable substitutes that do not compromise quality, and reduce carbon emission, toxic substance release and waste disposal concerns related to fossil fuel sources. In this study, colloidal starch-based latex nanoparticles that do not require cooking were used for pigment coating and coated on the paper surfaces. The effects of these new biobased binders on the structural and mechanical strength properties, liquid absorption, wetting and surface topography of the paper were investigated and compared with the properties of coated paper that SB latex was used as a coating binder. The results demonstrated that the biobased latex decreases the grammage of paper while maintaining an identical thickness relative to the SB latex samples. The porosity, permeability and roughness of biobased latex are found higher than the SB latex. The biobased latex successfully replaced SB latex at 1:1 ratio and enabled an equivalent of bursting, tear, tensile strength and structural properties.

Briquetted biomass, like sugarcane bagasse, a by-product of sugar mills, is a renewable energy source. This study aimed at the production and characterization of bagasse briquettes. The production of briquettes was carried out with different blending ratios (5, 10, and 15%) and average particle sizes (0.75, 2.775, and 4.8 mm) with various binders of cow dung, waste paper, and admixture (molasses and wastepaper). The bagasse underwent drying, size reduction, sieving, binder addition, and densification using a manual press during the briquetting process. Characterization of the physical and combustion parameters of briquettes, such as density, shatter resistance, proximate, and calorific value, followed the American Society for Testing and Materials procedures. The result shows that the maximum density of briquettes was 0.804 g/cm3, while shatter resistance varied from 83.051 to 94.975% (4.8mm, 5% cow dung and 0.75mm, 5% admixture binders respectively). ANOVA analysis showed that the factors and their interactions had a significant influence (p value < 0.05) on the physical properties. The optimum parameters of briquettes achieved were 14.953% admixture binder, 0.776 mm particle size, 0.805 g/cm3 density, and 95.811% shatter resistance. Bagasse briquettes with a 5% cow dung binder achieved a high calorific value of 39927.05 kcal/kg. The ultimate analysis revealed a composition of 47.49% carbon (C), 5.133% hydrogen (H), 1.557% nitrogen (N), 0.374% sulfur (S), and 45.446% oxygen (O). Therefore, bagasse has a high calorific value and can be used for briquetting to replace fossil fuel and firewood in different applications. In addition, due to its availability, utilizing as fuel source has economic advantage. [ABSTRACT FROM AUTHOR]

Since dockless bicycle-sharing systems (DBSS) first arose in China in 2016, studies have examined their governance. However, there has been no comprehensive review of the literature on DBSS. This paper presents the first systematic review of the burgeoning literature on the governance of DBSS. It maps key research themes, identifies research trends and provides a deeper understanding of the governance literature on DBSS. We searched the Web of Science (WoS), Scopus and China National Knowledge Infrastructure (CNKI) databases to identify 95 papers written in English or Chinese between 2016 and 2019 that address the governance of DBSS. A thematic coding of these papers was supported by bibliometric analysis and knowledge mapping using the VOSviewer. More papers are written in Chinese rather than English, focusing on Chinese cities. Although the time range of our literature search was between 2016 and 2019, the first paper was published in 2017. Four key themes in the governance of DBSSs were identified within the papers, and over time the papers shifted their focus from problem-finding and problem-defining to problem-solving. Discussion of the inherent characteristics of the sharing economy and the externalities underpinning the governance of DBSS (Theme 1) and rebalancing problems for DBSS (Theme 2) first arose in early 2017, whilst discussions of the government regulation of DBSS (Themes 3) and the cross-boundary governance models underpinning DBSS (Themes 4) first arose in mid-2017. This paper concludes with a discussion of the identified themes and trends in the context of the broader literature on bicycle sharing and identifies opportunities for further research.

Wastewater discharged from pulp and paper mills play a major role in environmental pollution and have significant effects on aquatic and terrestrial components. The main focus of this work is to study the potential laccase producing bacterium Bacillus cereus AKRC03 (accession no. MN720581.1) for the biodegradation and toxicity reduction from pulp paper mill wastewater. The isolated strain of Bacillus cereus AKRC03 exhibited up to 78.67% of decolorization and degradation capability for hazardous residual organic pollutants at different nutritional (glucose: 1.0%, peptone: 0.5%) and environmental conditions (pH: 7.0, temperature: 37 °C, agitation: 180 rpm, incubation period: 120 h). The absorption peak of the UV–Vis spectral scan identified the decolorization and degradation pattern for pollutants present in wastewater during treatment. Furthermore, the transformation of major pollutants was exhibited through GC-MS analysis. These were 1-dotriacontanol, 1-heptadecanol, tricosane, 1-(2-hydroxyethoxy) tridecane, and n-[(methylphenyl) methylene]-2-methyl-2-propanamine n-oxide. While silane, (dodecyloxy)trimethyl, (1á,3á,4à)-3,4-bis[dimethyl(4-methylphenyl)silyl]cyclo pentan-1-yl acetate, (2S,3R)-(3-tetradecyloxiranyl)methanol, hexadecanoic acid, 2,3-bis[(trimethylsilyl)oxy]propyl ester, and 2,4,6-tri[4,5-(methylenedioxy)phenyl]-s-triazine appeared as metabolic product after degradation of wastewater. The reduction of toxicity was measured up to 70% for treated wastewater with Phaseolus mungo L seeds and Tubifex tubifex worms. From these findings, it is concluded that the isolated bacterium may be used in the bioaugmentation process for the further detoxification and degradation of discharged pulp paper mill wastewater for environmental safety.

The economic feasibility of retrofitting an amine based post-combustion CO 2 capture process to an existing Kraft pulp mill and an existing integrated pulp and board mill has been assessed. This study builds on the technical assessment of the energy performance of the mills when retrofitting a post-combustion CO 2 capture process by Onarheim et al. (2017). Between 75 to 100% of the CO 2 emissions from the pulp and paper industry originate from the combustion of biomass. If the raw material is sourced sustainably, these emissions are categorized as carbon neutral. Applying sustainably managed biomass in the pulp and paper processes and capturing the resulting CO 2 for permanent storage enables the industry to go carbon negative. In this study, the economic impact of retrofitting CO 2 capture from the flue gases of the recovery boiler, the multi-fuel boiler and the lime kiln were assessed. The levelized cost of pulp and the cost of CO 2 avoided were evaluated based on six different scenarios varying the CO 2 tax, incentives for renewable electricity production, with and without recognizing biogenic CO 2 emissions as neutral (exempting CO 2 emissions from tax or not), and rewarding captured and permanently stored CO 2 with negative emissions credit. Results show that the pulp and paper industry has a potential for realizing feasible implementation of large-scale industrial Bio-CCS. For cases where 60–90% of total site CO 2 emissions are captured, the cost of avoided CO 2 amounts to 52–66 €/t for the Kraft pulp mill and 71–89 €/t for the integrated pulp and board mill. The cost of avoided CO 2 , and thus the realization of Bio-CCS in the pulp and paper industry, is strongly dependent on prevailing policy frameworks such as the EU ETS. In order to reach a levelized cost of pulp similar to the reference mill without CO 2 capture, a negative CO 2 emission credit of 60–70 €/t CO 2 for the Kraft pulp mill and 70–80 €/t CO 2 for the integrated pulp and board mill will be required. As long as biogenic CO 2 emissions that are captured and permanently stored are not recognized as negative and rewarded accordingly there is no economic incentive for the owners of pulp and paper mills to implement CCS. The only way to get the pulp and paper industry to implement and deploy Bio-CCS will need the support of the decision-makers in promoting the right policy framework and regulations to encourage the investment such as strong incentives for negative emissions which are bankable during the long term operation of the mills. [ABSTRACT FROM AUTHOR]

Soil microbial fuel cells (SMFCs) are attractive for low-cost bioelectricity generation. In this study, a multiwalled carbon nanotube paper (MCNTP) was fabricated by a simple method for use as the anode and cathode electrodes in a stab-type membrane-less SMFC (SSMFC). Activated carbon powder, carbon fibers, and cellulose fibers were bound by multiwalled carbon nanotube paint to form the MCNTP. As a result, the MCNTP exhibited high conductivity, flexibility, and durability. In addition, the SSMFC was designed as a module mounted with three anodes in series and a floating air cathode. The SSMFC could be activated on demand by simply stabbing in the wet soil. Experimental results showed that the floating cathode outperformed the non-floating one. The SSMFC generated the output shortly after being plugged into the wet soil. The maximum power density was at the level of 60–70 mW/m2 for three separate experiment cycles. Additionally, a single SSMFC was used to power a clock as an example to demonstrate its practical use. [ABSTRACT FROM AUTHOR]

Black liquor (spent cooking liquor) is one of the major byproducts of pulp and paper manufacturing. Black liquor contains 10–50% lignin, which is the main organic matter found within that liquor. Different types of black liquors are obtained as per the type of feedstock, pulping process and cooking method adopted by industries. In recent years, industries have been required to accommodate newer varieties of feedstock such as non-wood and recycled fibers during the delignification process, which can save plenty of trees and hence reduce their carbon footprint. Therefore, the newer black liquors being generated differ in their physical characteristics, chemical composition, and energy content from that of traditional processes.Currently, black liquor is seen as a platform for the production of many renewable materials for industrial applications that can be environmentally friendly with the potential to be used substitute for fuel and commercial materials. However, most of the published review articles focus on the kraft spent liquor and its derived kraft lignin that is obtained from kraft pulping process at the pulp and paper as a source of bio-fuel and biomaterials. Meanwhile, several other black liquors such as soda, and neutral sulfite spent (NSSC) liquor and their derived lignin are not highlighted as sources of biofuel and biomaterials. Therefore, this review highlights all the types of black liquors including soda, and neutral sulfite spent (NSSC) liquor in terms of their sources, physical and chemical characterization, purification processes, and the potential applications of black liquor and its derived lignin.

Abstract In this study, three-type paper supercapacitors based on the polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA)/phosphoric acid (H3PO4) gel electrolytes and graphite nanoparticles (GNPs) electrodes have been fabricated. The gel electrolytes and electrodes films have been coated on the paper using push coating and then characterized by scanning electron microscopy (SEM). In two types of the paper supercapacitors, on the PVDF gel electrolyte film, a layer of PVA/water and BaTiO3 as a gel separator film has been coated. The specific capacitance of the paper supercapacitors using cyclic voltammetry (CV) and galvanostatic (charge–discharge) methods at the scan rates 20 and 150 mV s−1 have been investigated. The paper supercapacitor based on the BaTiO3 separator film showed higher specific capacitance (312 F g−1) compared to other samples. Also, using electrochemical impedance spectroscopy (EIS), the Nyquist and Bode curves of paper supercapacitors have been measured. For the paper supercapacitors based on the PVDF gel electrolyte film and BaTiO3 separator film using the Nyquist curves, the equivalent series resistance (ESR) was 306 Ω and 125 Ω, respectively. The paper supercapacitor based on BaTiO3 gel separator structure represents a new type of flexible supercapacitor with high performance that can be applied to electronic devices.

The effectiveness of ClO2 bleaching as a replacement for conventional Cl2 bleaching, which is intensively practiced in developing countries, to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in non-wood pulp and paper mills has not been field tested. The first field study was performed to investigate PCDD/F variations when ClO2 bleaching was used as a substitute for conventional Cl2 bleaching in a non-wood pulp and paper mill. It was found that the PCDD/F toxic equivalents (TEQs) in solid and effluent samples were approximately 1.3–14.9 times lower when ClO2 bleaching was used instead of the conventional Cl2 bleaching. 2,3,7,8-Substituted tetrachlorinated dibenzofurans (2,3,7,8-TCDF) were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl2 bleaching. The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO2 bleaching was used instead of the conventional Cl2 bleaching. The replacement of Cl2 with ClO2 might decrease the chlorination reactions of dibenzofuran as potential precursors, and thus reduce the formation amounts of 2,3,7,8-TCDF. The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries. Keywords: PCDD/Fs, Pulp and paper mill, ClO2 bleaching, Cl2 bleaching, Persistent organic pollutants

Increasing levels of variable renewable energy require additional flexible resources in the global energy system. In countries with energy-intensive industries, flexibility may be increased through industrial demand side management (IDSM). In most studies, the potential of IDSM is estimated from a technical or theoretical viewpoint. However, IDSM capacity is only utilized if the industry finds it profitable, and thus the economic potential should also be assessed. The focus of this paper is on the intra-day IDSM potential of a paper mill site that is active in the Nordic power market. An optimization model is built to estimate the costs that occur when the paper mill executes regulating power bids, if the original production schedule has been optimized against a spot price forecast. The costs are estimated for different sizes of bids and a marginal cost curve is provided for pricing them. Using this marginal cost curve, the market potential of the case mill site is assessed. It is found that this potential is greatly influenced by the costs of executing regulating power bids. The results indicate that transmission system operators and policy makers should account for economic factors when assessing the potential of market based IDSM. [ABSTRACT FROM AUTHOR]