Search

Developing new software tools for analysis of large-scale biological data is a key component of advancing modern biomedical research. Scientific reproduction of published findings requires running computational tools on data generated by such studies, yet little attention is presently allocated to the installability and archival stability of computational software tools. Scientific journals require data and code sharing, but none currently require authors to guarantee the continuing functionality of newly published tools. We have estimated the archival stability of computational biology software tools by performing an empirical analysis of the internet presence for 36,702 omics software resources published from 2005 to 2017. We found that almost 28% of all resources are currently not accessible through uniform resource locators (URLs) published in the paper they first appeared in. Among the 98 software tools selected for our installability test, 51% were deemed “easy to install,” and 28% of the tools failed to be installed at all because of problems in the implementation. Moreover, for papers introducing new software, we found that the number of citations significantly increased when authors provided an easy installation process. We propose for incorporation into journal policy several practical solutions for increasing the widespread installability and archival stability of published bioinformatics software. [ABSTRACT FROM AUTHOR]

In recent years, the explosion of genomic data and bioinformatic tools has been accompanied by a growing conversation around reproducibility of results and usability of software. However, the actual state of the body of bioinformatics software remains largely unknown. The purpose of this paper is to investigate the state of source code in the bioinformatics community, specifically looking at relationships between code properties, development activity, developer communities, and software impact. To investigate these issues, we curated a list of 1,720 bioinformatics repositories on GitHub through their mention in peer-reviewed bioinformatics articles. Additionally, we included 23 high-profile repositories identified by their popularity in an online bioinformatics forum. We analyzed repository metadata, source code, development activity, and team dynamics using data made available publicly through the GitHub API, as well as article metadata. We found key relationships within our dataset, including: certain scientific topics are associated with more active code development and higher community interest in the repository; most of the code in the main dataset is written in dynamically typed languages, while most of the code in the high-profile set is statically typed; developer team size is associated with community engagement and high-profile repositories have larger teams; the proportion of female contributors decreases for high-profile repositories and with seniority level in author lists; and, multiple measures of project impact are associated with the simple variable of whether the code was modified at all after paper publication. In addition to providing the first large-scale analysis of bioinformatics code to our knowledge, our work will enable future analysis through publicly available data, code, and methods. Code to generate the dataset and reproduce the analysis is provided under the MIT license at . Data are available at . [ABSTRACT FROM AUTHOR]

Background: Many classification methods have been proposed based on magnetic resonance images. Most methods rely on measures such as volume, the cerebral cortical thickness and grey matter density. These measures are susceptible to the performance of registration and limited in representation of anatomical structure. This paper proposes a two-stage local feature fusion method, in which deformable registration is not desired and anatomical information is represented from moderate scale. Methods: Keypoints are firstly extracted from scale-space to represent anatomical structure. Then, two kinds of local features are calculated around the keypoints, one for correspondence and the other for representation. Scores are assigned for keypoints to quantify their effect in classification. The sum of scores for all effective keypoints is used to determine which group the test subject belongs to. Results: We apply this method to magnetic resonance images of Alzheimer's disease and Parkinson's disease. The advantage of local feature in correspondence and representation contributes to the final classification. With the help of local feature (Scale Invariant Feature Transform, SIFT) in correspondence, the performance becomes better. Local feature (Histogram of Oriented Gradient, HOG) extracted from 16×16 cell block obtains better results compared with 4×4 and 8×8 cell block. Discussion: This paper presents a method which combines the effect of SIFT descriptor in correspondence and the representation ability of HOG descriptor in anatomical structure. This method has the potential in distinguishing patients with brain disease from controls. [ABSTRACT FROM AUTHOR]

Open source software has been widely used in various industries due to its openness and flexibility, but it also brings potential security problems. Therefore, security analysis is required before using open source software. The current mainstream open source software vulnerability analysis technology is based on source code, and there are problems such as false positives, false negatives and restatements. In order to solve the problems, based on the further study of behavior feature extraction and vulnerability detection technology, a method of using dynamic behavior features to detect open source software vulnerabilities is proposed. Firstly, the relationship between open source software vulnerability and API call sequence is studied. Then, the behavioral risk vulnerability database of open source software is proposed as a support for vulnerability detection. In addition, the CNN-IndRNN classification model is constructed by improving the Independently Recurrent Neural Net-work (IndRNN) algorithm and applies to open source software security vulnerability detection. The experimental results verify the effectiveness of the proposed open source software security vulnerability detection method based on dynamic behavior features. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

This paper extends the observations presented in the previously published work on the afterhyperpolarization (AHP) duration changes in motoneurones (MNs) on the paretic (more affected) side of 11 post-stroke patients by the same analysis on the non-paretic (less-affected) side. The estimated AHP duration for patients’ MNs supplying more-affected muscles was significantly longer than control values and the elongation decreased with patient age and disorder duration. For MNs supplying less-affected muscles, dependency of AHP duration on age was closer to the control data, but the scatter was substantially bigger. However, the AHP duration estimate of less-affected MNs tended to be longer than that of controls in the short time elapsed since the stroke, and shorter than controls in the long time. Our results thus suggest that the spinal MNs on both sides respond to the cerebral stroke rapidly with prolongation of AHP duration, which tends to normalize with time, in line with functional recovery. This suggestion is in concert with the published research on post-stroke changes in brain hemispheres. To our knowledge, these dependencies have never been investigated before. Since the number of our data was limited, the observed trends should be verified in a larger sample of patients and such a verification could take into account the suggestions for data analysis that we provide in this paper. Our data are in line with the earlier published research on MN firing characteristics post-stroke and support the conclusion that the MUs of the muscles at the non-paretic side are also affected and cannot be considered a suitable control for the MUs on the paretic side. [ABSTRACT FROM AUTHOR]

The article discusses rules for considering regarding preprint submission of scientific work in journals. Topics include analysis of published papers undertaken by cell biologist Stephen Royle for estimating the average time from first submission to publication, data mining of the written content for making it better utilizing the knowledge, and encouraging authors to licenses and formats for facilitating reuse while retaining copyright to their work.

Stochastic link capacity degradations are common phenomena in transport network which can cause travel time variations and further can affect travelers’ daily route choice behaviors. This paper formulates a deterministic dynamic model, to capture the day-to-day (DTD) flow evolution process in the presence of degraded link capacity degradations. The aggregated network flow dynamics are driven by travelers’ study of uncertain travel time and their choice of risky routes. This paper applies the exponential-smoothing filter to describe travelers’ study of travel time variations, and meanwhile formulates risk attitude parameter updating equation to reflect travelers’ endogenous risk attitude evolution schema. In addition, this paper conducts theoretical analyses to investigate several significant mathematical characteristics implied in the proposed DTD model, including fixed point existence, uniqueness, stability and irreversibility. Numerical experiments are used to demonstrate the effectiveness of the DTD model and verify some important dynamic system properties. [ABSTRACT FROM AUTHOR]

Background and objectives: ECG signal is relatively weak and vulnerable to various noise interferences, such as electromyography. There will be robustness problems when detecting the instantaneous heart rate independently. In some cases, multiple human physiologic parameters are monitored to help in heart rate detection. Methods: In this paper, an algorithm that marks the R-wave peaks with the help of simultaneously recorded continuous blood pressure is proposed and tested on two databases. One database, called the challenge database, is provided by the PhysioNet/Computing in Cardiology Challenge 2014, and the other is the MGH/MF waveform database. Results: The final scores of the proposed algorithm are 97.3% for the challenge database and 96.6% for the MGH/MF waveform database. Conclusions: The experimental results show that this algorithm has high detection accuracy and a relatively strong robustness. [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

Diabetic retinopathy (DR) is a disease which is widely diagnosed using (colour fundus) images. Efficiency and accuracy are critical in diagnosing DR as lack of timely intervention can lead to irreversible visual impairment. In this paper, we examine strategies for scrutinizing images which affect diagnostic performance of medical practitioners via an eye-tracking study. A total of 56 subjects with 0 to 18 years of experience participated in the study. Every subject was asked to detect DR from 40 images. The findings indicate that practitioners use mainly two types of strategies characterized by either higher dwell duration or longer track length. The main findings of the study are that higher dwell-based strategy led to higher average accuracy (> 85%) in diagnosis, irrespective of the expertise of practitioner; whereas, the average obtained accuracy with a long-track length-based strategy was dependent on the expertise of the practitioner. In the second part of the paper, we use the experimental findings to recommend a scanning strategy for fast and accurate diagnosis of DR that can be potentially used by image readers. This is derived by combining the eye-tracking gaze maps of medical experts in a novel manner based on a set of rules. This strategy requires scrutiny of images in a manner which is consistent with spatial preferences found in human perception in general and in the domain of fundus images in particular. The Levenshtein distance-based assessment of gaze patterns also establish the effectiveness of the derived scanning pattern and is thus recommended for image readers. [ABSTRACT FROM AUTHOR]

This paper provides a description of how market competitiveness evaluations concerning mechanical equipment can be made in the context of multi-criteria decision environments. It is assumed that, when we are evaluating the market competitiveness, there are limited number of candidates with some required qualifications, and the alternatives will be pairwise compared on a ratio scale. The qualifications are depicted as criteria in hierarchical structure. A hierarchical decision model called PCbHDM was used in this study based on an analysis of its desirable traits. Illustration and comparison shows that the PCbHDM provides a convenient and effective tool for evaluating the market competitiveness of mechanical equipment. The researchers and practitioners might use findings of this paper in application of PCbHDM. [ABSTRACT FROM AUTHOR]

Recent high-throughput techniques have generated a flood of biological data in all aspects. The transformation and visualization of multi-dimensional and numerical gene or protein expression data in a single heatmap can provide a concise but comprehensive presentation of molecular dynamics under different conditions. In this work, we developed an easy-to-use tool named HemI (Heat map Illustrator), which can visualize either gene or protein expression data in heatmaps. Additionally, the heatmaps can be recolored, rescaled or rotated in a customized manner. In addition, HemI provides multiple clustering strategies for analyzing the data. Publication-quality figures can be exported directly. We propose that HemI can be a useful toolkit for conveniently visualizing and manipulating heatmaps. The stand-alone packages of HemI were implemented in Java and can be accessed at . [ABSTRACT FROM AUTHOR]

Objective: There is a need for structure to achieve functional patient engagement within mental healthcare organizations, and for clarification on how to proceed on a strategic level. The aim of this paper is to shed light on the implementation of a strategic organizational structure for patient engagement in mental health by examining why and how to implement a structure, the organizational and environmental factors that facilitate or limit the process, and the perceived consequences of the implementation. Method: This paper evaluates the implementation of a strategic committee for patient engagement in a mental healthcare organization in Montreal (Quebec, Canada). The research was designed as a qualitative single case study using a deductive approach by means of a conceptual framework. Data sources consisted in ten semi-structured interviews, three focus groups, and organizational documents. Results: The strategic committee for patient engagement was implemented as a means to formalize patient partner participation, following the introduction of a vision of full citizenship. Important aspects of its implementation included its composition and role, the elaboration of a framework for patient partner participation, and finally, ongoing application and evaluation of the framework. Several facilitating factors were identified, including executive management support, leadership, and a vision behind the participation. Limiting factors mainly consisted of resistance towards patient participation and the existence of stigma. Consequences included increased and improved patient engagement, as well as reduced stigma within the organization. Conclusion: This study shows that the implementation of a strategic organizational structure for patient engagement is comprehensive. It further shows the importance of a vision and an articulate leadership involving several actors. Further research is needed regarding the impact of this type of strategic structure on a clinical level. [ABSTRACT FROM AUTHOR]

Feature selection and classification are the main topics in microarray data analysis. Although many feature selection methods have been proposed and developed in this field, SVM-RFE (Support Vector Machine based on Recursive Feature Elimination) is proved as one of the best feature selection methods, which ranks the features (genes) by training support vector machine classification model and selects key genes combining with recursive feature elimination strategy. The principal drawback of SVM-RFE is the huge time consumption. To overcome this limitation, we introduce a more efficient implementation of linear support vector machines and improve the recursive feature elimination strategy and then combine them together to select informative genes. Besides, we propose a simple resampling method to preprocess the datasets, which makes the information distribution of different kinds of samples balanced and the classification results more credible. Moreover, the applicability of four common classifiers is also studied in this paper. Extensive experiments are conducted on six most frequently used microarray datasets in this field, and the results show that the proposed methods have not only reduced the time consumption greatly but also obtained comparable classification performance. [ABSTRACT FROM AUTHOR]

In this paper we compare systematically the most promising neuroevolutionary methods and two new original methods on the double-pole balancing problem with respect to: the ability to discover solutions that are robust to variations of the environment, the speed with which such solutions are found, and the ability to scale-up to more complex versions of the problem. The results indicate that the two original methods introduced in this paper and the Exponential Natural Evolutionary Strategy method largely outperform the other methods with respect to all considered criteria. The results collected in different experimental conditions also reveal the importance of regulating the selective pressure and the importance of exposing evolving agents to variable environmental conditions. The data collected and the results of the comparisons are used to identify the most effective methods and the most promising research directions. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

This paper studies the Retailer Stackelberg game in a supply chain consisting of two manufacturers and one retailer where they compete simultaneously under three factors including price, service and simple price discount contract. It is assumed that the second manufacturer provides service directly to his customers, and the retailer provides service for the first product’s customers, while the retailer buys the first product under price discount from the first manufacturer. The analysis of the optimal equilibrium solutions and the results of the numerical examples show that if a manufacturer chooses the appropriate range of discount rate, he will gain more profit than when there is no discount given to the retailer. This situation can be considered as an effective tool for the coordination of the first manufacturer and the retailer to offer discount by manufacturer and to provide the service by the retailer. We obtain equilibrium solution of Retailer Stackelberg game and analyze the numerical examples under two cases: a) the manufacturers sell their products to the retailer without price discount contract. b) The first manufacturer sells his products to the retailer with the simple price discount contract. The preliminary results show that the service and the price discount contract can improve the performance of supply chain. [ABSTRACT FROM AUTHOR]

Textual representations play an important role in the field of natural language processing (NLP). The efficiency of NLP tasks, such as text comprehension and information extraction, can be significantly improved with proper textual representations. As neural networks are gradually applied to learn the representation of words and phrases, fairly efficient models of learning short text representations have been developed, such as the continuous bag of words (CBOW) and skip-gram models, and they have been extensively employed in a variety of NLP tasks. Because of the complex structure generated by the longer text lengths, such as sentences, algorithms appropriate for learning short textual representations are not applicable for learning long textual representations. One method of learning long textual representations is the Long Short-Term Memory (LSTM) network, which is suitable for processing sequences. However, the standard LSTM does not adequately address the primary sentence structure (subject, predicate and object), which is an important factor for producing appropriate sentence representations. To resolve this issue, this paper proposes the dependency-based LSTM model (D-LSTM). The D-LSTM divides a sentence representation into two parts: a basic component and a supporting component. The D-LSTM uses a pre-trained dependency parser to obtain the primary sentence information and generate supporting components, and it also uses a standard LSTM model to generate the basic sentence components. A weight factor that can adjust the ratio of the basic and supporting components in a sentence is introduced to generate the sentence representation. Compared with the representation learned by the standard LSTM, the sentence representation learned by the D-LSTM contains a greater amount of useful information. The experimental results show that the D-LSTM is superior to the standard LSTM for sentences involving compositional knowledge (SICK) data. [ABSTRACT FROM AUTHOR]

Human-computer interface systems whose input is based on eye movements can serve as a means of communication for patients with locked-in syndrome. Eye-writing is one such system; users can input characters by moving their eyes to follow the lines of the strokes corresponding to characters. Although this input method makes it easy for patients to get started because of their familiarity with handwriting, existing eye-writing systems suffer from slow input rates because they require a pause between input characters to simplify the automatic recognition process. In this paper, we propose a continuous eye-writing recognition system that achieves a rapid input rate because it accepts characters eye-written continuously, with no pauses. For recognition purposes, the proposed system first detects eye movements using electrooculography (EOG), and then a hidden Markov model (HMM) is applied to model the EOG signals and recognize the eye-written characters. Additionally, this paper investigates an EOG adaptation that uses a deep neural network (DNN)-based HMM. Experiments with six participants showed an average input speed of 27.9 character/min using Japanese Katakana as the input target characters. A Katakana character-recognition error rate of only 5.0% was achieved using 13.8 minutes of adaptation data. [ABSTRACT FROM AUTHOR]

Authorship attribution is to identify the most likely author of a given sample among a set of candidate known authors. It can be not only applied to discover the original author of plain text, such as novels, blogs, emails, posts etc., but also used to identify source code programmers. Authorship attribution of source code is required in diverse applications, ranging from malicious code tracking to solving authorship dispute or software plagiarism detection. This paper aims to propose a new method to identify the programmer of Java source code samples with a higher accuracy. To this end, it first introduces back propagation (BP) neural network based on particle swarm optimization (PSO) into authorship attribution of source code. It begins by computing a set of defined feature metrics, including lexical and layout metrics, structure and syntax metrics, totally 19 dimensions. Then these metrics are input to neural network for supervised learning, the weights of which are output by PSO and BP hybrid algorithm. The effectiveness of the proposed method is evaluated on a collected dataset with 3,022 Java files belong to 40 authors. Experiment results show that the proposed method achieves 91.060% accuracy. And a comparison with previous work on authorship attribution of source code for Java language illustrates that this proposed method outperforms others overall, also with an acceptable overhead. [ABSTRACT FROM AUTHOR]

The Grid scheduler, schedules user jobs on the best available resource in terms of resource characteristics by optimizing job execution time. Resource failure in Grid is no longer an exception but a regular occurring event as resources are increasingly being used by the scientific community to solve computationally intensive problems which typically run for days or even months. It is therefore absolutely essential that these long-running applications are able to tolerate failures and avoid re-computations from scratch after resource failure has occurred, to satisfy the user’s Quality of Service (QoS) requirement. Job Scheduling with Fault Tolerance in Grid Computing using Ant Colony Optimization is proposed to ensure that jobs are executed successfully even when resource failure has occurred. The technique employed in this paper, is the use of resource failure rate, as well as checkpoint-based roll back recovery strategy. Check-pointing aims at reducing the amount of work that is lost upon failure of the system by immediately saving the state of the system. A comparison of the proposed approach with an existing Ant Colony Optimization (ACO) algorithm is discussed. The experimental results of the implemented Fault Tolerance scheduling algorithm show that there is an improvement in the user’s QoS requirement over the existing ACO algorithm, which has no fault tolerance integrated in it. The performance evaluation of the two algorithms was measured in terms of the three main scheduling performance metrics: makespan, throughput and average turnaround time. [ABSTRACT FROM AUTHOR]

Depth image-based rendering (DIBR), which is used to render virtual views with a color image and the corresponding depth map, is one of the key techniques in the 2D to 3D conversion process. Due to the absence of knowledge about the 3D structure of a scene and its corresponding texture, DIBR in the 2D to 3D conversion process, inevitably leads to holes in the resulting 3D image as a result of newly-exposed areas. In this paper, we proposed a structure-aided depth map preprocessing framework in the transformed domain, which is inspired by recently proposed domain transform for its low complexity and high efficiency. Firstly, our framework integrates hybrid constraints including scene structure, edge consistency and visual saliency information in the transformed domain to improve the performance of depth map preprocess in an implicit way. Then, adaptive smooth localization is cooperated and realized in the proposed framework to further reduce over-smoothness and enhance optimization in the non-hole regions. Different from the other similar methods, the proposed method can simultaneously achieve the effects of hole filling, edge correction and local smoothing for typical depth maps in a united framework. Thanks to these advantages, it can yield visually satisfactory results with less computational complexity for high quality 2D to 3D conversion. Numerical experimental results demonstrate the excellent performances of the proposed method. [ABSTRACT FROM AUTHOR]

Software Defined Networking (SDN) is an emerging promising paradigm for network management because of its centralized network intelligence. However, the centralized control architecture of the software-defined networks (SDNs) brings novel challenges of reliability, scalability, fault tolerance and interoperability. In this paper, we proposed a novel clustered distributed controller architecture in the real setting of SDNs. The distributed cluster implementation comprises of multiple popular SDN controllers. The proposed mechanism is evaluated using a real world network topology running on top of an emulated SDN environment. The result shows that the proposed distributed controller clustering mechanism is able to significantly reduce the average latency from 8.1% to 1.6%, the packet loss from 5.22% to 4.15%, compared to distributed controller without clustering running on HP Virtual Application Network (VAN) SDN and Open Network Operating System (ONOS) controllers respectively. Moreover, proposed method also shows reasonable CPU utilization results. Furthermore, the proposed mechanism makes possible to handle unexpected load fluctuations while maintaining a continuous network operation, even when there is a controller failure. The paper is a potential contribution stepping towards addressing the issues of reliability, scalability, fault tolerance, and inter-operability. [ABSTRACT FROM AUTHOR]

A Mesh topology is one of the most promising architecture due to its regular and simple structure for on-chip communication. Performance of mesh topology degraded greatly by increasing the network size due to small bisection width and large network diameter. In order to overcome this limitation, many researchers presented modified Mesh design by adding some extra links to improve its performance in terms of network latency and power consumption. The Cross-By-Pass-Mesh was presented by us as an improved version of Mesh topology by intelligent addition of extra links. This paper presents an efficient topology named Cross-By-Pass-Torus for further increase in the performance of the Cross-By-Pass-Mesh topology. The proposed design merges the best features of the Cross-By-Pass-Mesh and Torus, to reduce the network diameter, minimize the average number of hops between nodes, increase the bisection width and to enhance the overall performance of the network. In this paper, the architectural design of the topology is presented and analyzed against similar kind of 2D topologies in terms of average latency, throughput and power consumption. In order to certify the actual behavior of proposed topology, the synthetic traffic trace and five different real embedded application workloads are applied to the proposed as well as other competitor network topologies. The simulation results indicate that Cross-By-Pass-Torus is an efficient candidate among its predecessor’s and competitor topologies due to its less average latency and increased throughput at a slight cost in network power and energy for on-chip communication. [ABSTRACT FROM AUTHOR]

We propose the architecture of a novel robot system merging biological and artificial intelligence based on a neural controller connected to an external agent. We initially built a framework that connected the dissociated neural network to a mobile robot system to implement a realistic vehicle. The mobile robot system characterized by a camera and two-wheeled robot was designed to execute the target-searching task. We modified a software architecture and developed a home-made stimulation generator to build a bi-directional connection between the biological and the artificial components via simple binomial coding/decoding schemes. In this paper, we utilized a specific hierarchical dissociated neural network for the first time as the neural controller. Based on our work, neural cultures were successfully employed to control an artificial agent resulting in high performance. Surprisingly, under the tetanus stimulus training, the robot performed better and better with the increasement of training cycle because of the short-term plasticity of neural network (a kind of reinforced learning). Comparing to the work previously reported, we adopted an effective experimental proposal (i.e. increasing the training cycle) to make sure of the occurrence of the short-term plasticity, and preliminarily demonstrated that the improvement of the robot’s performance could be caused independently by the plasticity development of dissociated neural network. This new framework may provide some possible solutions for the learning abilities of intelligent robots by the engineering application of the plasticity processing of neural networks, also for the development of theoretical inspiration for the next generation neuro-prostheses on the basis of the bi-directional exchange of information within the hierarchical neural networks. [ABSTRACT FROM AUTHOR]

Behaviour models are the most commonly used input for predicting the reliability of a software system at the early design stage. A component behaviour model reveals the structure and behaviour of the component during the execution of system-level functionalities. There are various challenges related to component reliability prediction at the early design stage based on behaviour models. For example, most of the current reliability techniques do not provide fine-grained sequential behaviour models of individual components and fail to consider the loop entry and exit points in the reliability computation. Moreover, some of the current techniques do not tackle the problem of operational data unavailability and the lack of analysis results that can be valuable for software architects at the early design stage. This paper proposes a reliability prediction technique that, pragmatically, synthesizes system behaviour in the form of a state machine, given a set of scenarios and corresponding constraints as input. The state machine is utilized as a base for generating the component-relevant operational data. The state machine is also used as a source for identifying the nodes and edges of a component probabilistic dependency graph (CPDG). Based on the CPDG, a stack-based algorithm is used to compute the reliability. The proposed technique is evaluated by a comparison with existing techniques and the application of sensitivity analysis to a robotic wheelchair system as a case study. The results indicate that the proposed technique is more relevant at the early design stage compared to existing works, and can provide a more realistic and meaningful prediction. [ABSTRACT FROM AUTHOR]

A number of circular regression models have been proposed in the literature. In recent years, there is a strong interest shown on the subject of outlier detection in circular regression. An outlier detection procedure can be developed by defining a new statistic in terms of the circular residuals. In this paper, we propose a new measure which transforms the circular residuals into linear measures using a trigonometric function. We then employ the row deletion approach to identify observations that affect the measure the most, a candidate of outlier. The corresponding cut-off points and the performance of the detection procedure when applied on Down and Mardia’s model are studied via simulations. For illustration, we apply the procedure on circadian data. [ABSTRACT FROM AUTHOR]

This paper describes the process of adapting the Stanford Coreference resolution module to the Basque language, taking into account the characteristics of the language. The module has been integrated in a linguistic analysis pipeline obtaining an end-to-end coreference resolution system for the Basque language. The adaptation process explained can benefit and facilitate other languages with similar characteristics in the implementation of their coreference resolution systems. During the experimentation phase, we have demonstrated that language-specific features have a noteworthy effect on coreference resolution, obtaining a gain in CoNLL score of 7.07 with respect to the baseline system. We have also analysed the effect that preprocessing has in coreference resolution, comparing the results obtained with automatic mentions versus gold mentions. When gold mentions are provided, the results increase 11.5 points in CoNLL score in comparison with results obtained when automatic mentions are used. The contribution of each sieve is analysed concluding that morphology is essential for agglutinative languages to obtain good performance in coreference resolution. Finally, an error analysis of the coreference resolution system is presented which have revealed our system’s weak points and help to determine the improvements of the system. As a result of the error analysis, we have enriched the Basque coreference resolution adding new two sieves, obtaining an improvement of 0.24 points in CoNLL F1 when automatic mentions are used and of 0.39 points when the gold mentions are provided. [ABSTRACT FROM AUTHOR]

Lately, discourse structure has received considerable attention due to the benefits its application offers in several NLP tasks such as opinion mining, summarization, question answering, text simplification, among others. When automatically analyzing texts, discourse parsers typically perform two different tasks: i) identification of basic discourse units (text segmentation) ii) linking discourse units by means of discourse relations, building structures such as trees or graphs. The resulting discourse structures are, in general terms, accurate at intra-sentence discourse-level relations, however they fail to capture the correct inter-sentence relations. Detecting the main discourse unit (the Central Unit) is helpful for discourse analyzers (and also for manual annotation) in improving their results in rhetorical labeling. Bearing this in mind, we set out to build the first two steps of a discourse parser following a top-down strategy: i) to find discourse units, ii) to detect the Central Unit. The final step, i.e. assigning rhetorical relations, remains to be worked on in the immediate future. In accordance with this strategy, our paper presents a tool consisting of a discourse segmenter and an automatic Central Unit detector. [ABSTRACT FROM AUTHOR]

Single-point incremental forming (SPIF) is a technology that allows incremental manufacturing of complex parts from a flat sheet using simple tools; further, this technology is flexible and economical. Measuring the forming force using this technology helps in preventing failures, determining the optimal processes, and implementing on-line control. In this paper, an experimental study using SPIF is described. This study focuses on the influence of four different process parameters, namely, step size, tool diameter, sheet thickness, and feed rate, on the maximum forming force. For an efficient force predictive model based on an adaptive neuro-fuzzy inference system (ANFIS), an artificial neural network (ANN) and a regressions model were applied. The predicted forces exhibited relatively good agreement with the experimental results. The results indicate that the performance of the ANFIS model realizes the full potential of the ANN model. [ABSTRACT FROM AUTHOR]

The Demographic and Health Surveys (DHS) are a major source for many demographic and health indicators in developing countries. Although these indicators are well defined in the literature, using survey data to calculate some of these indicators has never been an easy task for data users. This paper presents the software, a user-friendly R package developed to calculate fertility indicators, such as the total fertility rate, general fertility rate, and age-specific fertility rates, and childhood mortality indicators, such as the neonatal mortality rate, post-neonatal mortality rate, infant mortality rate, child mortality rate, and under-5 mortality rate, from the DHS data. The package allows for national and subnational indicators. In addition, the package calculates sampling error indicators such as standard error, design effect, relative standard error, and confidence interval for each demographic indicator. The package can also be used to calculate the same indicators from other population surveys such as the Multiple Indicator Cluster Survey (MICS). [ABSTRACT FROM AUTHOR]

A reasonable micro-pits texture has been initially proved that it can improve friction characteristics between wood and cemented carbide surface and reduce surface friction coefficient. In order to study the cutting performance of the micro-texture when it is applied to the cutting tool for cutting wood more effectively, this paper selected micro-pit texture for studying influence of surface micro-texture cutting tool on wood cutting performance and cutting temperature, finding that when micro-pit cemented carbide cutting tool is adopted for turning the northeast China ash (Fraxinus spp.), it can reduce cutting force of turning and surface friction coefficient between rake face and cuttings. Moreover, for type A and type B cutting tools, when the texture parameters are that the diameter of the micro-pit is 80μm, the depth of the micro pit is: 10μm, area occupancy is 20% and the diameter of the micro-pit is 120μm, the depth of the micro-pit is 10μm and the area occupancy is 20%, the effect generated is the best. When a texture cutting tool is used for cutting, the decrease of the highest temperature in the cutting area is not very great, but the average temperature in the cutting area changes a lot, which is mainly caused by that micro-texture is processed at a position of the rake face close to the main cutting edge and that the highest temperature of cutting is mainly generated on the contact point between tool tip and wood. A reasonable micro-texture parameter can form a layer of liquid lubricating film on the up and down contact surfaces such that the direct contact between cemented carbide and northeast China ash is changed into indirect contact between lubricating films formed by the liquid so as to reduce the surface friction coefficient. [ABSTRACT FROM AUTHOR]

The problem of checking the genotype distribution obtained for some diallelic marker for compatibility with the Hardy-Weinberg equilibrium (HWE) condition arises also for loci on the X chromosome. The possible genotypes depend on the sex of the individual in this case: for females, the genotype distribution is trinomial, as in the case of an autosomal locus, whereas a binomial proportion is observed for males. Like in genetic association studies with autosomal SNPs, interest is typically in establishing approximate compatibility of the observed genotype frequencies with HWE. This requires to replace traditional methods tailored for detecting lack of fit to the model with an equivalence testing procedure to be derived by treating approximate compatibility with the model as the alternative hypothesis. The test constructed here is based on an upper confidence bound and a simple to interpret combined measure of distance between true and HWE conforming genotype distributions in female and male subjects. A particular focus of the paper is on the derivation of the asymptotic distribution of the test statistic under null alternatives which is not of the usual Gaussian form. A closed sample size formula is also provided and shown to behave satisfactorily in terms of the approximation error. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this paper is to show how a specialized planning and guidance application called Fraxinus, can be built on top of the CustusX platform (), which is an open source image-guided intervention software platform. Fraxinus has been customized to meet the clinical needs in navigated bronchoscopy. Methods: The application requirements for Fraxinus were defined in close collaboration between research scientists, software developers and clinicians (pulmonologists), and built on top of CustusX. Its superbuild system downloads specific versions of the required libraries and builds them for the application in question, including the selected plugins. New functionality is easily added through the plugin framework. The build process enables the creation of specialized applications, adding additional documentation and custom configurations. The toolkit’s libraries offer building blocks for image-guided applications. An iterative development process was applied, where the clinicians would test and provide feedback during the entire process. Results: Fraxinus has been developed and is released as an open source planning and guidance application built on top of CustusX. It is highly specialized for bronchoscopy. The proposed workflow is adapted to the different steps in this procedure. The user interface of CustusX has been modified to enhance information, quality assurance and user friendliness with the intention to increase the overall yield for the patient. As the workflow of the procedure is relatively constant, some actions are predicted and automatically performed by the application, according to the requirements from the clinicians. Conclusions: The CustusX platform facilitates development of new and specialized applications. The toolkit supports the process and makes important extension and injection points available for customization. [ABSTRACT FROM AUTHOR]

Effort-aware just-in-time (JIT) defect prediction is to rank source code changes based on the likelihood of detects as well as the effort to inspect such changes. Accurate defect prediction algorithms help to find more defects with limited effort. To improve the accuracy of defect prediction, in this paper, we propose a deep learning based approach for effort-aware just-in-time defect prediction. The key idea of the proposed approach is that neural network and deep learning could be exploited to select useful features for defect prediction because they have been proved excellent at selecting useful features for classification and regression. First, we preprocess ten numerical metrics of code changes, and then feed them to a neural network whose output indicates how likely the code change under test contains bugs. Second, we compute the benefit cost ratio for each code change by dividing the likelihood by its size. Finally, we rank code changes according to their benefit cost ratio. Evaluation results on a well-known data set suggest that the proposed approach outperforms the state-of-the-art approaches on each of the subject projects. It improves the average recall and popt by 15.6% and 8.1%, respectively. [ABSTRACT FROM AUTHOR]

As sequencing prices drop, genomic data accumulates—seemingly at a steadily increasing pace. Most genomic data potentially have value beyond the initial purpose—but only if shared with the scientific community. This, of course, is often easier said than done. Some of the challenges in sharing genomic data include data volume (raw file sizes and number of files), complexities, formats, nomenclatures, metadata descriptions, and the choice of a repository. In this paper, we describe 10 quick tips for sharing open genomic data. [ABSTRACT FROM AUTHOR]

The number of images taken per patient scan has rapidly increased due to advances in software, hardware and digital imaging in the medical domain. There is the need for medical image annotation systems that are accurate as manual annotation is impractical, time-consuming and prone to errors. This paper presents modeling approaches performed to automatically classify and annotate radiographs using several classification schemes, which can be further applied for automatic content-based image retrieval (CBIR) and computer-aided diagnosis (CAD). Different image preprocessing and enhancement techniques were applied to augment grayscale radiographs by virtually adding two extra layers. The Image Retrieval in Medical Applications (IRMA) Code, a mono-hierarchical multi-axial code, served as a basis for this work. To extensively evaluate the image enhancement techniques, five classification schemes including the complete IRMA code were adopted. The deep convolutional neural network systems Inception-v3 and Inception-ResNet-v2, and Random Forest models with 1000 trees were trained using extracted Bag-of-Keypoints visual representations. The classification model performances were evaluated using the ImageCLEF 2009 Medical Annotation Task test set. The applied visual enhancement techniques proved to achieve better annotation accuracy in all classification schemes. [ABSTRACT FROM AUTHOR]

Background: Regular expression matching (REM) is widely employed as the major tool for deep packet inspection (DPI) applications. For automatic processing, the regular expression patterns need to be converted to a deterministic finite automata (DFA). However, with the ever-increasing scale and complexity of pattern sets, state explosion problem has brought a great challenge to the DFA based regular expression matching. Rule grouping is a direct method to solve the state explosion problem. The original rule set is divided into multiple disjoint groups, and each group is compiled to a separate DFA, thus to significantly restrain the severe state explosion problem when compiling all the rules to a single DFA. Objective: For practical implementation, the total number of DFA states should be as few as possible, thus the data structures of these DFAs can be deployed on fast on-chip memories for rapid access. In addition, to support fast pattern update in some applications, the time cost for grouping should be as small as possible. In this study, we aimed to propose an efficient grouping method, which generates as few states as possible with as little time overhead as possible. Methods: When compiling multiple patterns into a single DFA, the number of DFA states is usually greater than the total number of states when compiling each pattern to a separate DFA. This is mainly caused by the semantic overlaps among different rules. By quantifying the interaction values for each pair of rules, the rule grouping problem can be reduced to the maximum k-cut graph partitioning problem. Then, we propose a heuristic algorithm called the one-step greedy (OSG) algorithm to solve this NP-hard problem. What’s more, a subroutine named the heuristic initialization (HI) algorithm is devised to further optimize the grouping algorithms. Results: We employed three practical rule sets for the experimental evaluation. Results show that the OSG algorithm outperforms the state-of-the-art grouping solutions regarding both the total number of DFA states and time cost for grouping. The HI subroutine also demonstrates its significant optimization effect on the grouping algorithms. Conclusions: The DFA state explosion problem has became the most challenging issue in the regular expression matching applications. Rule grouping is a practical direction by dividing the original rule sets into multiple disjoint groups. In this paper, we investigate the current grouping solutions, and propose a compact and efficient grouping algorithm. Experiments conducted on practical rule sets demonstrate the superiority of our proposal. [ABSTRACT FROM AUTHOR]

Modern bioinformatics and computational biology are fields of study driven by the availability of effective software required for conducting appropriate research tasks. Apart from providing reliable and fast implementations of different data analysis algorithms, these software applications should also be clear and easy to use through proper user interfaces, providing appropriate data management and visualization capabilities. In this regard, the user experience obtained by interacting with these applications via their Graphical User Interfaces (GUI) is a key factor for their final success and real utility for researchers. Despite the existence of different packages and applications focused on advanced data visualization, there is a lack of specific libraries providing pertinent GUI components able to help scientific bioinformatics software developers. To that end, this paper introduces GC4S, a bioinformatics-oriented collection of high-level, extensible, and reusable Java GUI elements specifically designed to speed up bioinformatics software development. Within GC4S, developers of new applications can focus on the specific GUI requirements of their projects, relying on GC4S for generalities and abstractions. GC4S is free software distributed under the terms of GNU Lesser General Public License and both source code and documentation are publicly available at [ABSTRACT FROM AUTHOR]

The number of selectable targets is one of the main factors that affect the performance of a brain-computer interface (BCI). Most existing code modulated visual evoked potential (c-VEP) based BCIs use a single pseudorandom binary sequence and its circularly shifting sequences to modulate different stimulus targets, making the number of selectable targets limited by the length of modulation codes. This paper proposes a novel paradigm for c-VEP BCIs, which divides the stimulus targets into four target groups and each group of targets are modulated by a unique pseudorandom binary code and its circularly shifting codes. Based on the paradigm, a four-group c-VEP BCI with a total of 64 stimulus targets was developed and eight subjects were recruited to participate in the BCI experiment. Based on the experimental data, the characteristics of the c-VEP BCI were explored by the analyses of auto- and cross-correlation, frequency spectrum, signal to noise ratio and correlation coefficient. On the basis, single-trial data with the length of one stimulus cycle were classified and the attended target was recognized. The averaged classification accuracy across subjects was 88.36% and the corresponding information transfer rate was as high as 184.6 bit/min. These results suggested that the c-VEP BCI paradigm is both feasible and effective, and provides a new solution for BCI study to substantially increase the number of available targets. [ABSTRACT FROM AUTHOR]

Microprocessors in safety-critical system are extremely vulnerable to hacker attacks and circuit crosstalk, as they can modify binaries and lead programs to run along the wrong control flow paths. It is a significant challenge to design a run-time validation method with few hardware modification. In this paper, an efficient control flow validation method named DCM (Dual-Processor Control Flow Validation Method) is proposed basing on dual-processor architecture. Since a burst of memory-access-intensive instructions could block pipeline and cause lots of waiting clocks, the DCM assigns the idle pipeline cycles of the blocked processor to the other processor to validate control flow at run time. An extra lightweight monitor unit in each processor is needed and a special dual-processor communication protocol is also designed to schedule the redundant computing capacity between two processors to do validation tasks better. To further improve the efficiency, we also design a software-based self-validation algorithm to help reduce validation times. The combination of both hardware method and software method can speed up the validation procedure and protect the control flow paths with different emphasis. The cycle-accurate simulator GEM5 is used to simulate two ARMv7-A processors with out-of-order pipeline. Experiment shows the performance overhead of DCM is less than 22% on average across the SPEC 2006 benchmarks. [ABSTRACT FROM AUTHOR]

In this paper, we propose a sentiment-based approach to investigate the temporal and spatiotemporal effects on tourists’ emotions when visiting a city’s tourist destinations. Our approach consists of four steps: data collection and preprocessing from social media; visitor origin identification; visit sentiment identification; and temporal and spatiotemporal analysis. The temporal and spatiotemporal dimensions include day of the year, season of the year, day of the week, location sentiment progression, enjoyment measure, and multi-location sentiment progression. We apply this approach to the city of Chicago using over eight million tweets. Results show that seasonal weather, as well as special days and activities like concerts, impact tourists’ emotions. In addition, our analysis suggests that tourists experience greater levels of enjoyment in places such as observatories rather than zoos. Finally, we find that local and international visitors tend to convey negative sentiment when visiting more than one attraction in a day whereas the opposite holds for out of state visitors. [ABSTRACT FROM AUTHOR]

The appreciation for the need to record electroencephalographic (EEG) signals from humans while walking has been steadily growing in recent years, particularly in relation to understanding gait disturbances. Movement artefacts (MA) in EEG signals originate from mechanical forces applied to the scalp electrodes, inducing small electrode movements relative to the scalp which, in turn, cause the recorded voltage to change irrespectively of cortical activity. These mechanical forces, and thus MA, may have various sources (e.g., ground reaction forces, head movements, etc.) that are inherent to daily activities, notably walking. In this paper we introduce a systematic, integrated methodology for removing MA from EEG signals recorded during treadmill (TM) and over-ground (OG) walking, as well as quantify the prevalence of MA in different locomotion settings. In our experiments, participants performed walking trials at various speeds both OG and on a TM while wearing a 32-channel EEG cap and a 3-axis accelerometer, placed on the forehead. Data preprocessing included separating the EEG signals into statistically independent additive components using independent component analysis (ICA). We observed an increase in electro-physiological signals (e.g., neck EMG activations for stabilizing the head during heel-strikes) as the walking speed increased. These artefact independent-components (ICs), while not originating from electrode movement, still exhibit a similar spectral pattern to the MA ICs–a peak at the stepping frequency. MA was identified and quantified in each component using a novel method that utilizes the participant’s stepping frequency, derived from a forehead-mounted accelerometer. We then benchmarked the EEG data by applying newly established metrics to quantify the success of our method in cleaning the data. The results indicate that our approach can be successfully applied to EEG data recorded during TM and OG walking, and is offered as a unified methodology for MA removal from EEG collected during gait trials. [ABSTRACT FROM AUTHOR]

Serious game development for rehabilitation therapy is becoming increasingly popular because of the motivational advantages that these types of applications provide. Consequently, the need for a common process framework for this category of software development has become increasingly evident. The goal is to guarantee that products are developed and validated by following a coherent and systematic method that leads to high-quality serious games. This paper introduces a new process framework for the development of serious games for motor rehabilitation therapy. We introduce the new model and demonstrate its application for the development of a serious game for the improvement of the balance and postural control of adults with cerebral palsy. The development of this application has been facilitated by two technological transfer contracts and is being exploited by two different organizations. According to clinical measurements, patients using the application improved from high fall risk to moderate fall risk. We believe that our development strategy can be useful not only for motor rehabilitation therapy, but also for the development of serious games in many other rehabilitation areas. [ABSTRACT FROM AUTHOR]

Data, including information generated from them by processing and analysis, are an asset with measurable value. The assets that biological research funding produces are the data generated, the information derived from these data, and, ultimately, the discoveries and knowledge these lead to. From the time when Henry Oldenburg published the first scientific journal in 1665 (Proceedings of the Royal Society) to the founding of the United States National Library of Medicine in 1879 to the present, there has been a sustained drive to improve how researchers can record and discover what is known. Researchers’ experimental work builds upon years and (collectively) billions of dollars’ worth of earlier work. Today, researchers are generating data at ever-faster rates because of advances in instrumentation and technology, coupled with decreases in production costs. Unfortunately, the ability of researchers to manage and disseminate their results has not kept pace, so their work cannot achieve its maximal impact. Strides have recently been made, but more awareness is needed of the essential role that biological data resources, including biocuration, play in maintaining and linking this ever-growing flood of data and information. The aim of this paper is to describe the nature of data as an asset, the role biocurators play in increasing its value, and consistent, practical means to measure effectiveness that can guide planning and justify costs in biological research information resources’ development and management. [ABSTRACT FROM AUTHOR]