Search

Using abandoned gas wells as geothermal resources for energy production is an effective way to extract geothermal energy from geological formations. These abandoned wells have the potential to significantly contribute in the rising global demand for energy without requiring the land disruption resulting from deep drilling or digging, processes necessary for energy extraction from geological formations via more traditional methods. In this paper, a method to extract geothermal energy from abandoned gas wells is proposed. The method offers an efficient, economical, and environmentally-conscious way to generate electricity. A mathematical model of a thermal and hydraulic coupling process is constructed, and a 3D numerical model is generated to study the process of geothermal energy extraction by retrofitting an abandoned gas reservoir into a geothermal reservoir. Using the model, heat extraction and fluid flow are analyzed over a period of 50 years. The heat production, electricity generation, and thermal recovery over the lifetime of the reservoir indicate that a commercially viable geothermal dual well system can produce geothermal energy effectively. Dual-well systems contain at least one injection well and one production well. They are composed of a two-way flow system in which the fluid flows into the reservoir via an injection well and returns from the production well having absorbed thermal energy from the surrounding rocks. Sensitivity analysis of the main parameters controlling the average outlet temperature of the fluid from the sedimentary geothermal system reveals that abandoned gas wells are a suitable source of geothermal energy. This energy can be harvested via a method whose use of reservoir fluids differs from that of the traditional method of closed-loop circulation via a borehole heat exchanger. Here, it is demonstrated that abandoned oil and gas fields can be repurposed to be geothermal energy sources that provide low-cost electricity and are economically sustainable. [ABSTRACT FROM AUTHOR]

The Sustainable Energy Development Authority of Malaysia (SEDA) regularly receives complaints about damaged components and distribution boards of PV systems due to lightning strikes. Permanent and momentary interruptions of distribution circuits may also occur from the disturbance. In this paper, a solar PV Rooftop system (3.91 kWp) provided by SEDA was modelled in the PSCAD/EMTDC. The Heidler function was used as a lightning current waveform model to analyse the transient current and voltage at two different points susceptible to the influence of lightning events such as different lightning current wave shape, standard lightning current and non-standard lightning current. This study examines the effect on the system components when lightning directly strikes at two different points of the installation. The two points lie between the inverter and the solar PV array and between inverter and grid. Exceptionally high current and voltage due to the direct lightning strike on a certain point of a PV Rooftop system was also studied. The result of this case study is observed with and without the inclusion of surge protective devices (SPDs). The parameters used were 31 kA of peak current, 10 metres cable length and lightning impulse current wave shape of 8/20μs. The high current and voltage at P1 striking point were 31 kA and 2397 kV, respectively. As for the AC part, the current and voltage values were found to be 5.97 kA and 5392 kV, respectively.Therefore, SPDs with suitable rating provided by SEDA were deployed. Results showed that high transient current voltage is expected to clamp sharply at the values of 1.915 kV and 0 A at the P1 striking point. As for the AC part, the current and voltage values were found to be 0 kA and 0.751 V, respectively. Varying lightning impulse current wave shapes at striking point P2 showed that the highest voltage was obtained at waveshape 10/350 μs at 11277 kV followed by wave shapes of 2/70 μs, 8/20 μs and 0.7/6 μs. The high value of transient voltage was clamped at a lower level of 2.029 kV. Different lightning amplitudes were also applied, ranging from 2–200 kA selected based on the CIGRE distribution. It showed that the current and voltage at P1 and P2 were directly proportional. Therefore, the SPD will be designed at an acceptable rating and proper position of SPD installation at solar PV Rooftop will be proposed. The results obtained in this study can then be utilised to appropriately assign a SPD to protect the PV systems that are connected to the grid. Installing SPDs without considering the needs of lightning protection zones would expose the expensive equipment to potential damage even though the proper energy coordination of SPDs is in place. As such, the simulation results provide a basis for controlling the impacts of direct lightning strikes on electrical equipment and power grids and thus justify SPD coordination to ensure the reliability of the system. [ABSTRACT FROM AUTHOR]