Search

Mitigation of global warming, energy security and industrial competitiveness urge the energy-intensive pulp and paper industry (PPI) to transform energy use practices. This study investigates how the PPI has responded to the need for the energy transition in the 2000s. Finland and Sweden as forerunners of energy-efficient operation and decarbonization of the PPI are used as target countries. Understanding of changes in energy consumption is complemented using decomposition analysis (Logarithmic Mean Divisia Index Method) and the energy efficiency index approach. Analysis of companies’ investments in energy technologies is used for explaining changes in energy production. Evidence of significant development towards the more sustainable operation of the PPI was found. Energy consumption per produced unit has decreased, i.e., energy efficiency has improved. Fossil fuels have been partially replaced with bio-based alternatives. Thus, the CO2 intensity has decreased substantially. The generation of renewable electricity has increased in both countries. Examples of Finland and Sweden indicate that the PPI has great potential to contribute to CO2 emission reduction worldwide in the future as energy efficiency can be further improved, and the share of fossil fuels can be decreased increasing the use of biofuels and self-generated green electricity at least in kraft pulp mills.

This paper aimed to modify the ignitability of the bagasse paper by using talc powder, 1,3-di-aniline-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, and nanocellulose crystal. The formation of cellulose nanocrystals (CNCs) was detected using transmission electron microscopy (TEM), X-ray diffraction (XRD). Thermal analysis as thermal gravimetric analysis (TGA) of the specimens recorded the improvement of the highest % of ash residue at 750 °C compared to the untreated one. The shape of the flame spread was studied. The ignition properties were studied for the untreated and treated specimens by limiting oxygen index (LOI) and flame chamber (UL/94), which recorded enhancing compared to the untreated specimen. This improvement was recorded either by measuring the mechanical properties (tensile strength, burst strength, elongation, and elasticity) of the specimens. The current article showed that the treated specimen was recorded the highest values compared to the untreated one in all physical, mechanical, and ignition properties, so these treatment paper sheets may be used as fire-retardant packaging materials.

In society, there is widespread and growing acceptance of the value of cooperation between industry and universities being collaborative Research and Development (R&D) domain and industrial policy the fuel of knowledge-based economies. In this paper, different domains of cooperation between the University and Industry as well as their generated benefits for each partner are identified. These benefits have been assigned to each domain of cooperation, showing a large number of benefits associated to collaborative R&D. Leading us to make a statement - collaborative R&D is the key cooperation domain for sustainable long-term university-industry partnerships. Suggestions are given about how to continue this research study.

Abstract writing is a very important since it is the piece of formal writing which should attract the attention of the reader and make him/her read the rest of the paper. Thus, it must be clear, concise, coherent, and powerful enough to attract the reader and provide him/her with the key information about the content of a research paper. All university students have to write an abstract in English in their qualification papers. However, non-native students of English usually have difficulties in writing an abstract in English. For example, the Czech students lack formal writing skills in English since the skill of formal writing is not developed enough in their native language, i.e. Czech. Therefore, the aim of this article is to discuss the use of an off-line scaffolding tool, which can help students develop an abstract in English, as well as to demonstrate how this tool can be incorporated in the whole Course of Practical English taught at the Faculty of Informatics and Management of the University of Hradec Kralove in the Czech Republic. The application was developed for students as support to a face-to-face class instruction, which proved to be insufficient in teaching students how to write an abstract in English. The application reflects the structure and sentence functions of the abstract and provides students with a model abstract, as well as with additional formulations. Overall, the application was designed with the purpose to enhance student’s skill of writing an abstract in English, as well as to lead students to successfully complete the task by making the application user-friendly - easy-to-use, accessible and transferrable as far as the knowledge is concerned. The application aims to enhance students’ autonomous learning by tailoring the content to their specific needs and making it accessible anytime and from anywhere.

Cyber-physical systems theory offers a powerful framework for modeling, analyzing, and designing real engineering systems integrating communication, control, and computation functionalities (the cyber part) within a natural and/or man-made system governed by the laws of physics (the physical part). New methodological developments in cyber-physical systems theory are required by traditional application domains such as manufacturing, transportation, and energy systems, which are currently experiencing significant and – to some extent – revolutionary changes to address the needs of our modern society. The goal of this position paper is to provide the cyber-physical systems community, and especially young researchers, a clear view on what are research directions worth pursuing motivated by the challenges posed by modern applications.

Unprinting of paper can reduce multiple life-cycle stages in the recycling of paper to yield significant environmental impact. Laser-unprinting has been demonstrated for uncoated paper but causes significant damage to coated paper. This work explores a scalable optical (non-laser) process for unprinting coated paper. Printed coated paper is exposed to pulsed broad-spectrum Intense Pulsed Light (IPL) from a xenon lamp and the toner is then removed by dabbing gently with an ethanol wipe. While black toner is easily unprinted, unprinting of colored prints (red, blue, green) is best realized by incorporating an initial overprint of black toner. An unprinting throughput on the order of mm2/s is achieved. Three distinct regimes of unprinting are identified based on the extent of toner removal and damage of the paper. The optical properties of the unprinted paper, characterized via UV–Visible spectrophotometry, are correlated to these regimes to understand the potential for in-situ optical process monitoring. Scanning Electron Micrography and Fourier-Transform Infrared Spectroscopy are performed to understand the underlying mechanisms that govern the occurrence of the different unprinting regimes. Further, the potential impact of the developed approach on recycling of paper is discussed in the context of the capabilities of current optical unprinting approaches and the potential elimination of life-cycle stages in conventional paper recycling.

The recycling of waste paper has been an effective way to achieve the environmental-friendly growth of papermaking industry. Focusing on the mixed-pulping process which has been generally employed, to ensure the required properties of the deinking pulp (DIP) and minimize the purchase cost of waste paper, an intelligent model scheduling the mixing ratio of waste paper was developed in the study. Primarily, driven by the field data of mixing ratio of waste paper and DIP properties, the prediction models of DIP properties were developed by SVM, GA-SVM, and BP-NN algorithms. Subsequently, based on the best prediction model, the scheduling model for the mixing ratio of waste paper was set up by NSGAII algorithm. The experimental results showed that, based on the obtained best BP-NN prediction model of DIP properties, the developed NSGAII scheduling model for the ratio of waste paper could achieve excellent scheduling results under the rigorous constraints and multi-objective. Compared with the previous study, the developed prediction and scheduling models in this study reduced the purchase cost of waste paper by 2.16%, and improved the acceptable proportion of DIP property from 56.07% to 100%.

Industrialization and urbanization are the key drivers to threaten the environmental quality and natural resources. Traditionally, pulp and paper industry has been highly reliant on forest based resources for its escalation. Shortage of forest based raw materials, strict environmental regulations and policies have compelled the industry to seek for alternate raw materials for its production. Mills are now focusing on exploring the potential of different agro wastes such as cereal straws and bagasse etc. In present research, sugarcane trash, one of the most abundant agro residues in India, was investigated for its capability in pulping and bleaching. Chemical characterization of sugarcane trash showed that it contains 40.4% cellulose, 33.2% hemicelluloses, 17.4% lignin and 6.45% ash content with 2.76% silica. To cook sugarcane trash with soda pulping method, 14% alkali charge, 15 min time and 162 °C temperature was found to be optimum and pulp of kappa no. 19.8 was prepared that exhibited good strength properties. Bleaching of pulp was carried out using elemental chlorine (Cl2), hypochlorite and chlorine dioxide (ClO2) based sequences. Replacement of Cl2 with ClO2 has significant impact on strength properties and effluent characteristics. Oxygen delignification stage was incorporated prior to ClO2 that resulted in improved optical properties of pulp with noticeable reduction in wastewater load. This paper elaborates the need of using sugarcane trash in paper mills with environment friendly pulping and bleaching processes to combat with the problem of waste management, wastewater load reduction during bleaching and substitute for wood based raw materials in papermaking.

The effects of paper waste (PW) ratio on biogas production by two-stage thermophilic anaerobic co-digestion (coAD) of food waste (FW) and PW, two main components of organic fraction of municipal solid waste, were evaluated in lab-scale continuously stirred tank systems with semi-continuous feeding. Four PW ratios (0, 20, 40, and 50%) were studied in the test. The experimental results showed the two-stage thermophilic coAD could operate stably after an adjustment period at all PW ratios. Although the increase of PW ratio decreased methane content, production and yield, reaction rates of four AD steps, it could increase the methane production of substrate when the FW was fixed. The pH, total volatile fatty acids, total alkalinity, and total ammonium of the sludge in the second stage of AD, also decreased with the increase of PW ratio in the test. The change of the substrate's organic composition, increase of carbohydrate and decrease of protein and lipid, were the main reason for the decrease of methane content, production and yield and changes of the second stage sludge characteristics. An apposite PW ratio (PW-20%) could enhance the degradation of matters (TS, VS and TCOD).

This paper examines the mechanical properties and durability of recycled aggregate concrete (RAC) containing 100% coarse recycled concrete aggregate (RCA) and industrial by-products. The by-products, including waste paper sludge ash (PSA), fly ash (FA), silica fume (SF), and metakaolin (MK) of different proportions (5%, 10%, 15%) in RAC, were used in two methods: replacement and addition methods. The use of by-products (mineral admixtures) to mitigate the low quality of RAC was demonstrated through experimental outcomes in this study. The addition of industrial by-products was presented as a promising alternative for the addition of more Portland cement in RAC to enhance RAC's quality. The results showed that the strength and durability of RAC containing mineral admixtures in the addition method were higher than the addition of more cement or the replacement method. Notably, PSA considerably improved the mechanical properties of RAC at an early age, and it substantially improved the resistance of RAC to acid and sulfate attacks. At 90 days, FA and MK improved mechanical properties of RAC greater than SF and PSA did. Among combinations, the proportions of by-products in RAC of 5% PSA, 10% SF, 15% MK and 15% FA can produce the highest performance of RAC with 100% coarse recycled concrete aggregate (RCA).

Pulp and paper industry is one of the high priority sectors that generates large amount of solid (sludge) and liquid (paper mill effluent) wastes. Making use of this huge quantity of paper mill sludge (PMS) in an environment friendly manner is challenging and cost involving. Similarly the present wastewater treatment strategies based on physical and chemical methods encounter certain serious setbacks including secondary pollution generation with expensive mode of abatement processes. The present study aims at a “waste treats waste” strategy for the bioremediation of paper mill effluent in fluidized bed reactor (FBR) using another waste of the same industry, PMS as immobilizing matrix for Planococcus sp. TRC1, a wastewater bacterial isolate. This study simultaneously explores this isolate for the yellowish orange pigment it produces (2.3 ± 0.2 mg/gm of dry bacterial biomass) and characterizes it as a member of the pharmacologically important carotenoid pigment family via UV-Vis spectrophotometry, TLC, FT-IR and 13C NMR. The antioxidant potential of this pigment was studied by DPPH assay (IC50 = 33 ± 0.4 μg/ml) and H2O2 assay (IC50 = 147.4 ± 2.2 μg/ml). In FBR, the PMS immobilized bacteria showed removal of phenol, lignin, colour and COD from the effluent by 96%, 74%, 81% and 85% respectively after 60hr of treatment. The experimental data on immobilization fitted well with pseudo second-order (R2 = 0.955) and Freundlich adsorption isotherm (R2 = 0.996) models. The alterations in PMS before and after bacterial immobilization, as revealed by SEM and FT-IR, depicted the success of PMS as immobilization matrix. Phytotoxicity (90% seed germination) and mutagenicity studies confirmed that the treated effluent was substantially less toxic than its raw state. This study highlights a novel utilization possibility of PMS in an eco-friendly and economic way as immobilization matrix for Planococcus sp.TRC1 for paper pulp mill effluent treatment along with production of carotenoid pigment from this potential bacterial isolate as value added product.

This work aims at developing sustainable processes for pulp and paper industry by integration of the biorefinery concept to an existing pulp and paper process. A systematic methodology employing a superstructure-based process synthesis approach is employed with support from computer-aided tools to determine potential pathways for a long-term sustainable growth objective. A superstructure of the multi-product biorefinery process network for the pulp and paper industry is developed. It is divided into three sub-networks, a chemical pulping section, a biochemical production section and a black liquor utilization section. Superstructure optimization is performed with the objective to maximize profit to determine optimal integrated networks for three scenarios. The obtained results provide useful insights for further development of the optimal networks as sustainable integrated biorefinery combined with pulp and paper mills.

To evaluate the effect of brown-rot fungi Oligoporus placenta and earthworm Eisenia fetida on decomposition of paper mill sludge, the paper mill sludge was mixed with cow dung in 0, 25, 50, 75, and 100% proportions and changes in physicochemical quality of waste mixtures was carried out for 28 days. All waste mixtures were treated with: Setup-I (E. fetida), Setup-II (O. placenta) and, Setup-III (E. fetida + O. placenta). A decrease in total organic carbon, C/N ratio and cellulose but an increase in total kjeldhal nitrogen, total phosphorus, total potassium and pH was recorded. The paper mill sludge in 50–75% proportion in feedstock showed the better results and rate of mineralisation were in order: Setup-III > Setup-I > Setup-II. The proportion of CD has direct role in waste mineralisation. The microbial population (bacterial, fungal and actinomycetes) and earthworm biomass were also high in Setup-III, suggesting the influence of brown-rot fungi on paper mill sludge humification. Results indicate that fungal inoculate in vermicomposting was effective in decomposing cellulose-rich industrial sludge.

Microbial fuel cell is a promising technology to harvest energy from wastewater, and effective anode catalysts are essential for its applications. In this study, zero-dimension nitrogen-doped carbon dots, as biocompatible efficient modifiers, were synthesized and decorated onto the carbon paper surface to prepare microbial fuel cell anode. The as-fabricated nitrogen-doped carbon dots decorated carbon paper anode was able to enhance electricity generation and efficient wastewater treatment. It was found that the as-fabricated electrode had a high hydrophilicity, which was favorable for the microbial immobilization. Compared with the carbon paper anode, the biofilm on the as-prepared anode was almost twice of thickness. After introducing nitrogen-doped carbon dots, the extracellular electron transfer process from the microorganisms to the anode was enhanced. The microbial fuel cell with the as-developed anode generated a remarkable power output of 0.32 mW, 1.1 times higher than that of the raw carbon paper anode with same measurement area. Moreover, 16 sRNA pyrosequencing analysis shows that the quantity of Pseudomonas on the electrode increased by ∼40%, which also promoted the electron transfer rate by excreting mediators like phenazines or phenazine derivatives. This work developed a new approach to design microbial fuel cell anode material and fabricate a high-efficiency and environmentally friendly anode for electricity generation from wastewater.

This study estimates efficiency in energy utilization at firm level and feasible energy saving target of the pulp and paper industry in India. For this analysis, data is extracted from prowess database for a panel of 67 major pulp and paper producing firms over the period of 2003–04 to 2013–14. We employed radial and non-radial variants of data envelopment analysis to assess the feasible energy saving target with the current level of output. Particularly, we employed slack-based method with variable returns to scale as a flexible and pragmatic approach to performance analysis. Results reveal no significant improvement in the energy efficiency level of the firms over the study period and show vast energy saving potential. Results of slack-based measure of energy efficiency show the feasible energy saving potential of 40%. Further, size of the firm, age and financial performance are important factors that influence energy efficiency. Therefore, this study recommends special attention to the paper industry while implementing energy efficiency programme. We also reviewed four major policies for industrial energy efficiency improvement initiated by Bureau of Energy Efficiency, India.

Black liquor, an industrial waste, also generally called spent liquor is a promising feedstock for production of bio-carbon due to its high lignin and energy contents. Mild processing conditions and sustainable resource utilization can drive commercial utilization of this industrial waste. A novel oxidative procedure using hydrogen peroxide as a green liquid oxidant at room temperature for processing of paper recycling neutral sulphite semi-chemical spent liquor was established and evaluations were carried out for its efficiency. Standard hydrothermal carbonization was carried out for comparing bio-carbon production qualitatively and quantitatively using the same spent liquor. The oxidation procedure was performed at room temperature using 5% of H2O2 followed by washing in diluted sulfuric acid (0.15 N) while hydrothermal carbonization was performed at 250 °C. The bio-carbon produced were similar in terms of ash percentage and ranged from 1.25 ± 0.05 to 1.48 ± 0.05% for oxidation method and from 1.11 ± 0.03 to 1.45 ± 0.04% for hydrothermal carbonization. The carbon contents for the oxidation method ranged from 60.54 to 61.50% and 66.81–67.31% for hydrothermal carbonization while higher heating values ranged from 25.32 to 26.11 MJ/kg and from 28.68 to 29.34 MJ/kg respectively. The mass yield ranged from 29.98 to 31.88% by the oxidation, while it was 15.02–16.08% by hydrothermal carbonization.

The global demand for bio-plastic particularly polyhydroxyalkanoate (PHA) have been increased in the last few decades as a substitute of petrochemical-based plastic. Utilization of waste paper, the primary constituent of municipal solid waste (MSW), as a carbon source for polyhydroxybutyrate (PHB) production is not only an alternative, environmental friendly route of waste management but also helps to valorize the waste. In this study, hydrogen peroxide pretreated waste paper saccharification has been optimized using central composite design (CCD). The maximum hydrolysis (88.18%) occurred at paper loading 5.0 g/L, agitation 242 rpm, working volume 20%, cellulase 49.82 U/g, β-glucosidase 20.9 U/g and hemicellulase 29.5 U/g. PHB synthesis and biomass accumulation by xylose-utilizing Burkholderia sacchari using waste paper hydrolysate were studied using different nitrogen sources and carbon to nitrogen (C/N) ratios. Maximum PHB and dry cell weight (DCW) occurred with ammonium sulfate and a C/N ratio of 20. The highest biomass (3.63 g/L), the maximum PHB accumulation (44.2%) and the maximum reducing sugar utilization (92.1%) were observed after 48 h of cultivation using diluted hydrolysate. The physicochemical properties of the extracted PHB were compatible with the standard PHB. Hence, the waste paper could be exploited as a renewable feedstock for the sustainable production of PHB.

This work demonstrates a novel-type paper-based solid electrolyte (PBSE) and its application in Al-air battery, which is targeted for miniwatt applications. Benefited from the solid-form electrolyte, a liquid-free operation of the Al-air battery is realized, eliminating the potential leakage hazard and therefore improving the battery practicability. The PBSE is prepared by impregnating gel electrolyte into porous cellulose paper, followed by a solution casting process to solidify the gel. The as-prepared PBSE can either be used in mechanical rechargeable Al-air batteries, or be integrated into single-use flexible Al-air batteries. Currently the PBSE can achieve a moderate battery performance with a peak power density of 3.8 mW cm-2 and an Al specific capacity of 900.8 mA h g-1. Properties of the PBSE can be further improved by a comprehensive parametric study on its fabrication parameters, such as gel concentration, casting temperature, casting time, porosity and pore size of paper substrate, etc.

Small companies encounter difficulties to adapt to new markets with a sustainable perspective. The subject of this article is a paper transformation company which has been eager to develop the organic farming market by developing a new plant support. Alternatives made from plant fibres or plastics exist, such as jute and polypropylene. The main difficulty of this project was to ecodesign a paper product with a multicriteria approach. The factors considered have been divided into two categories. Firstly, the environmental impacts calculated according to the Life Cycle Assessment methodology (on raw material extraction, manufacturing and end-of-life) are summarised. Secondly, the characteristics of the product are discussed in regards to these results and sustainability questions as part of the interpretation phase. Finally, ways of improvement of the LCA methodology to improve the study in terms of geographical representativeness and societal considerations are discussed.

Using waste paper as fuel for domestic heating is a beneficial recycling option for small island developing states where there are lacks of resources for energy and waste treatment. However, there are concerns about the impact of air pollutants emitted from the burning of the self-made paper briquettes as household air pollution is recognised as the greatest environmental risk for human. In this study, combustion tests were carried out for paper briquettes made in one Pacific island and three commercial fuels in Australia including wood briquettes, kindling firewood and coal briquettes in order to: 1) characterise the emissions of three criteria air pollutants including particulate matters, CO and NOx including their emission factors (EF) from the tested fuels; and 2) compare the EFs among the tested fuels and with others reported in the literature. The results showed that waste paper briquettes burned quickly and generated high temperature but the heat value is relatively low. Paper briquettes and coal briquettes produced higher CO concentration than the others while paper briquettes generated the highest NOx level. Only PM2.5 concentration emitted from paper briquettes was similar to kindling firewood and lower than wood briquettes. Burning of paper briquettes and wood briquettes produced particulate matter with large average count median diameter (72 and 68 nm) than coal briquette and kindling firewood (45 and 51 nm). The EFs for CO, NOx and PM2.5 of paper briquettes were within the range of EFs reported in this study as well as in the literature. Overall, the results suggested that using paper briquettes as fuel for domestic heating will not likely to generate higher level of three major air pollutants compared to other traditional fuels.

Anaerobic treatment of sedimented fibers collected from bottom of a bay that had been receiving pulp and paper mill wastewater for about 70 years were studied for the first time in semi-continuously fed continuously stirred tank reactors (CSTR). Anaerobic treatment of the fiber sediment was shown to be feasible, without dilution and with nitrogen and buffer supplement, at organic loading rates (OLR) up to 2.5 kg VS/m3d and hydraulic retention times (HRT) of 60 d resulting in methane yields of 201 ± 18 L CH4/kg VS. Co-digestion of sedimented fiber with sewage sludge at an OLR of 1.5 kg VS/m3d and HRT of 20 d resulted in a methane production of 246 ± 10 L CH4/kg VS. The techno-economic feasibility of mono and co-digestion process together with several case dependent factors such as maximum operable OLR, digestate utilization needs to be evaluated before making further conclusions for larger scale remediation applications. acceptedVersion

Success management can bring valuable contributions to improve project results and stakeholders’ relationships. However, the success management process must be explicitly integrated into project management approaches, guides and methodologies (such as PMBOK, PRINCE2 or PM2), which is not currently happening. The purpose of this position paper is to discuss the need and importance for this integration and to present a first proposal on how this can be operationalized. To support the position, the methodology of the European Union PM2 was used. The result of the integration demonstrates that it is possible to advance management and raise the level of project success.

Background In Software Engineering (SE), conference publications have high importance both in effective communication and in academic careers. Researchers actively discuss how a paper should be organized to be accepted in mainstream conferences. Aiming This work tackles the problem of generalizing and characterizing the type of papers accepted at SE conferences. Method The paper offers a new perspective in the analysis of SE literature: a categorization scheme for SE papers is obtained by merging, extending and revising related proposals from a few existing studies. The categorization scheme is used to classify the papers accepted at three top-tier SE conferences during five years (2012–2016). Results While a broader experience is certainly needed for validation and fine-tuning, preliminary outcomes can be observed relative to what problems and topics are addressed, what types of contributions are presented and how they are validated. Conclusions The results provide insights to paper writers, paper reviewers and conference organizers in focusing their future efforts, without any intent to provide judgments or authoritative guidelines.

Organic-rich pulp and paper mill sludge (PPMS) has the potential to become a renewable carbon source for producing alternatives to fossil-based product. In this work, PPMS treated by hydrothermal carbonization (HTC) was investigated based on its pyrolysis properties. The pyrolytic mechanism, kinetics data and product of the sample were studied using TG as well as pyrolysis tests in Py-GC/MS and a bench-scale reactor at 450, 550, and 650 °C. The results show that the thermal decomposition of feedstock is a two-stage reaction. The mean activation energy of the pyrolysis of HTC treated PPMS was estimated as 233.08 kJ/mol, which is higher than that of the pyrolysis of paper sludge reported before. The changes in enthalpies, entropies and Gibbs free energies from the reactants to the activated complex were estimated. The concentration of monocyclic aromatic hydrocarbons in the derived organic liquid fraction shows a positive correlation with the pyrolysis temperature. At 550 °C, the organic liquid fraction reached its highest yield at 13.7% with an oxygen level of 10.7 wt% and a higher heating value of 35.9 MJ/kg. The pyrolytic chars show that a molar ratio of O:C is less than 0.2, which shows potential for use as a carbon sink.

The industrial solid waste generation and its stockpile disposal have major environmental consequences. These consequences could be minimized through the solid waste application as a raw material in other industries. The current study focusses on the utilization of lime sludge with boiler ash synthesized nanosilica for production of belite based clinker at relatively lower temperature. Lime sludge was also used in combination with fly ash and boiler ash to check the synthesis of compounds at varying temperatures. Nanosilica was synthesized from pretreated boiler ash through alkali treatment and acid precipitation. The synthesized nanosilica has been characterized for specific surface area, crystallinity, surface functional groups and size. Three different mixtures, containing lime sludge with nanosilica, fly ash, and boiler ash are fired at temperatures ranging from 900 °C to 1200 °C and characterized for the synthesis of belite. Conventionally, belite is synthesized above 1200 °C, whereas the combined application of lime sludge and nanosilica reduces the temperature of belite synthesis to 900 °C without pre calcination or addition of any chemical stabilizer. In the case of lime sludge and boiler ash blend, belite formation takes place at the higher temperature (1100–1200 °C). Anorthite synthesis takes place in case of lime sludge and fly ash blend, due to high percentage of alumina present in fly ash. Lime sludge and nanosilica based belite clinker are used to develop newer cementitious binder. Hydration and strength properties of developed binder proved worthy as building materials. This study will present alternatives for sustainable utilization of lime sludge, fly ash and boiler ash in construction.

In remote areas, such as India, Africa and Southeast Asia, typically not connected to the natural gas distribution network, tissue paper production is currently carried out using a Yankee cylinder and two hot air hoods heated with saturated steam produced in conventional boilers. In this way the drying air is heated at medium temperature, around 160-180 °C, with consequent low levels of dried paper production. In this context, the present study intends to evaluate the technical and economic feasibility of using a wood biomass fixed bed downdraft gasification plant for the production of syngas to be used as fuel in gas hoods, in order to reach high drying temperatures (around 500 °C), comparable with those of the current modern hoods powered with natural gas. Using previously developed calculation codes, an evaluation of energy performance of the paper drying system and of the gasification plant has been performed. The present study also evaluates the possibility of applying a CHP plant, powered by biomass, for the production of steam and electric, this last obtained adopting a steam turbine, thus covering all the electrical and thermal needs of the paper mill. Results show that, for a paper mill with a production of about 80 t/day of paper, two gasification reactors with a thermal output of about 1.95 MWt, and a consumption of dry biomass of 0.86 t/h, are required. For the steam system, the net electric power needed to meet the needs of the paper mill is about 3100 kW with a consumption of 4.72 t/h of moist biomass and a net efficiency of 23.9 %.

The need to view innovation policy through the lens of policy mixes has gained momentum given the growing complexity, the dynamics of real-world policy and the wide array of difficulties to address the current great societal challenges, notably the increasing pressure on the ecosystems that support our society. One of the main challenges concerning the transition towards bioeconomy, is to gain a more in-depth understanding on the policy mix to stimulate innovation in sustainability transitions. Our paper aims at enriching the portfolio of empirical case studies on policy mixes for innovation and sustainable transitions, by investigating the development of the policy mix underpinning the sustainability transition of the pulp and paper industry in Sweden. We apply a case study approach which draws on event history analysis, semi-structured interviews with industry and policy makers, literature reviews, a participative workshop with stakeholders from the pulp and paper industry, as well as on the IEA databases on climate change and energy efficiency policies and measures. Our analysis emphasises coordination, timing and scale in policy mixes as important elements to understand how instruments interact to accelerate sustainability transitions. The mapping of the policy mix shows that destabilising policies were crucial for accelerating the transition process of the industry. Prior to novelty creation policies, destabilising policies (e.g. environmental policies) were needed for 'innovation policy instruments' to be effective. More specific instruments (e.g. carbon tax), targeting particular functions of the innovation systems, require 'on-the-ground' policy intelligence and benefit from close interaction with industry.

Activating flux is made up of inorganic material mixed with a volatile medium. The objective of this study is to identify and review the literature in activating flux, and different type of welding techniques. For that purpose, a structured review method is adopted and the Scopus database is used as a primary source for the selection of papers. The papers were identified using the string term of “Activating flux” OR “Activated flux” in the title of papers. And a total of 238 papers were identified for the study. Besides the above few other papers were also reviewed and the materials used, the type of flux used, and the findings of different combinations were highlighted in the form of tables. The findings of the study provide a comprehensive understanding of the different type of welding techniques focusing on TIG welding, and the different combination of flux used and their impact was summarized.

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries.

The paper and cellulose manufacturing industry generates significant quantities of waste, including an extremely humid sludge, which is considered to be an effluent with high environmental liability for the manufacturer. Studies have shown that this waste sludge may be utilized in construction material, such as mortar for fixing blocks, as well as for ceiling and wall coatings that use ceramic masonry as a sealant. The recycling of pulp and paper industry waste sludge has important environmental benefits, by preventing soil and water pollution caused by inadequate disposal and by reducing the depletion of natural resources, such as lime, used in cementitious materials. This study analyzed the sustainability of incorporating such waste into cement-based mortars. Tests were conducted replacing lime, one of the most expensive mortar components with high environmental impact, with waste sludge in contents of 5%, 10%, 15%, and 20%. Analysis was then performed on the samples to assess the primary technical characteristics of these incorporated mortars, such as the consistency index, heat of hydration, content of incorporated air, water retention, mechanical strength and the capillarity coefficient. The results were compared with the results of the characterization tests that were performed on the waste material. The results showed that for use in wall and ceiling mortar coatings, the level of incorporation should not exceed 10%, because higher levels yield lower values of mechanical strength resistance, incompatible with market requirements. This result is probably due to the low heat of hydration of the waste material which generates slower reactions. On the other hand, higher levels of waste material content, above 10%, are appropriate convenient for mortar used to fill small repairs in masonry that do not require control of properties.

The present study investigates the effect on methane production from waste paper when co-digested with macroalgal biomass. Both feedstocks were previously mechanically pretreated to reduce their particle size. The study was planned according two factors: the feedstock to inoculum (F/I) ratio and the waste paper to macroalgae (WP/MA) ratio. The F/I ratios checked were 0.2, 0.3 and 0.4 and the WP/MA ratios were 0:100, 25:75, 50:50, 75:25 and 100:0. The highest methane yield (386 L kg−1 VSadded) was achieved at an F/I ratio of 0.2 and a WP/MA ratio of 50:50. A biodegradability index of 0.87 obtained in this study indicates complete conversion of feedstock at an optimum C/N ratio of 26. Synergistic effect was found for WP/MA 25:75, 50:50 and 75:25 mixing ratios compared with the substrates mono-digestion.

Properties of cellulosic materials, such as average molar mass (MMvis), crystallinity index and hemicelluloses content may influence the efficiency of the enzymatic conversion of cellulose to glucose. Studies on the simultaneous influence of these parameters have been scarcely found in the literature. In the present study, the conversion of cellulose to glucose was investigated using cellulosic materials with different MMvis, crystallinity, and hemicelluloses content: microcrystalline cellulose (MCC, MMvis = 22104 g mol−1, CI = 79%, no hemicelluloses detected), sisal pulp (SP, MMvis = 94618 g mol−1, CI = 66%, hemicelluloses content = 2.6%) and filter paper (FP, MMvis = 98530 g mol−1, CI = 63%, hemicelluloses content = 19.2%). During the reactions, aliquots were withdrawn and, in addition to the liquors, the unreacted cellulosic materials were evaluated by MMvis, CI, SEM, length and thickness, which can help further understand the reaction as a whole. The liquors were characterized by high-performance liquid chromatography (HPLC) and Miller's method (or DNS). The highest yield for the conversion of cellulose to glucose was observed for SP (88%), followed by MCC (64%) and FP (52%). The results indicated that the presence of high hemicelluloses content (FP) had a more significant interference effect than high crystallinity (MCC).

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area.

This study aims to examine the economic and environmental benefits of recovered paper and potential contribution of the recovered paper to the Kingdom of Saudi Arabia (KSA) Vision 2030. The Vision 2030 is an inclusive development policy, recently launched, with the objectives to build the best future for the country. The Vision 2030 is based on three ambitious goals: making the country a vibrant society, a thriving economy and an ambitious nation. It is estimated that by 2030, 5.05 million ton of waste paper would be recovered in the country. About 11.3 billion SAR (US $3.01 billion) would be added to the country’s GDP and would create about 16,536 new jobs if the recovered paper industry is built in the country. Moreover, a net environmental benefit of 9.6 million crude barrel oil savings and 4.5 million ton of CO2 savings from GHG emissions could be achieved by 2030 only from the paper waste recovery in the country. The potential benefits of paper waste recycling in KSA highlight the needs of effective measures to optimize the economic and environmental opportunities inherited in the waste paper industry. These measures should focus on capitalizing the local waste paper processing industry, restrict the export of raw waste paper materials, and enhance the waste paper collection process and quantity.

Different heating processes were applied to pretreat the pulp and paper mill sludge to enhance the hydrolysis stage. Hot air oven, autoclave, microwave and water bath were used for comparison. Chemical analyses exposed that all the pretreatment methods have shown improvement in solubilisation of organic matter. Among the pretreatments studied, heat transfer through hot air (80 °C for 90 min) mode had the highest impact on sludge solubilisation. There was an increase in cellulose (P = 0.0096), acid soluble (P = 0.0053) and insoluble lignin (P = 0.0012), but decrease in hemicellulose (P = 0.0009) content after pretreatment. The XRD and FT-IR spectroscopic characterisation shows the development of aliphatic, unsaturated and carbonyl carbon functionalities in the pretreated samples at higher severities. FESEM picture also confirms the change in structure after pretreatment. Thus, pretreatments contribute to disruption of the lignocellulosic structure making the cellulose easily accessible to acidogenic microorganisms.

Green Energy efficiency is becoming more important because of the resulting cost reduction and image of green society which helps to enhance competitiveness in a globalized green market. Pulp and paper manufacturing is a large-scale industry which is generally regarded as important for national development. The Pulp and Paper industry consumes approximately 2.5% of total industrial energy consumption in Thailand by 44 factories distributed throughout the country. Therefore, energy efficiency improvement can play a significant role in the industry. Investigations of the cost effectiveness of energy efficiency measures and technologies using bottom-up Conservation Supply Curve (CSC) in the pulp and paper mill process are required. This study examines the concept, methodology, and the usefulness of the energy conservation supply curve, and the potential to create the appropriate energy policies to the Thai Pulp and Paper Industry.

Waste paper, one of the major components of municipal and industrial wastes, has considerable potential as a low-cost inductive feedstock for enzyme production. In this study, four kinds of waste papers were used for simultaneous production of cellulase and xylanase by Trichoderma longiflorum. The highest FPase activities (3.21 IU/mL and 2.97 IU/mL) were achieved using waste office paper (WOP) and corrugated board (CB), respectively, followed by magazine paper (MP, 2.51 IU/mL) and tissue paper (TP, 2.34 IU/mL). The maximum β-glucosidase activities (0.51 IU/mL) and xylanase activities (382.59 IU/mL) were obtained from CB substrates, which were higher than that in the reported literature using waste paper. Correspondingly, the soluble protein concentrations and SDS-PAGE profiles from CB fermentation revealed that more enzymes were secreted during fermentation compared with other waste paper. Moreover, the structural features of different waste paper were characterized by using SEM and XRD technique and revealed that the structural variations were mainly caused by the raw wood sources and papermaking processes, and further affected the fermentation capacity. In addition, a higher β-glucosidase activity of 0.80 IU/mL were obtained from the mixed carbon source of CB and wheat bran (WB), which were significantly improved and increased by 56.86% when compared with the CB as single carbon source. This study confirmed that the waste paper without pretreatment could be efficiently utilized as an inductive feedstock for simultaneous production of cellulase and xylanase by T. longiflorum. Therefore, these findings obtained from this study will provide a more widely insight into investigating the low-cost inductive feedstock for enzyme production, which were of great benefit both for the economy and environment.

Due to the security threats faced in the connected world, the consideration of security requirements during system design and modeling has become a necessity. Unfortunately, the identification of new requirements that may arise throughout additional phases of a system’s life-cycle (e.g. operation) must also be considered due to the ever-changing threat landscape. These new requirements may derive in system adaptations or modifications that ensure continuous system security. The identification of these new requirements and the implementation of their derived changes must be performed in a timely manner in order to avoid time windows where the system is vulnerable to security attacks. Unfortunately, the timely implementation of security-related changes is a challenge when dealing with automation systems as it may affect their availability and functionality. This position paper presents an approach that allows semiautomatic identification of system vulnerabilities in order to facilitate the derivation of new requirements that allow to ensure the security of a system. This identification is carried out throughout multiple phases of a system’s life-cycle.

Membrane heat exchangers were used for moisture and heat recovery from a hot and humid natural gas stream in indirect contact with an air stream. A plate membrane module with spiral channels on each side was designed to configure gas and air streams in co-current and counter-current flow. Two types of membranes, a commercial kraft paper, and a laboratory-made thin-film composite membrane, were used as the module core. The thermal efficiency and the water recovery from the humid gas were calculated and compared under different operating conditions. At a unit flow ratio of air/gas, the greatest effectiveness was achieved at a methane flow of 100 cm3/min, but water recovery increased at higher gas flows. For the counterflow configuration, an air/methane flow ratio of 2 was sufficient to achieve the highest total effectiveness and water recovery; however, larger air/gas ratios were beneficial to improve heat and moisture transfer for the co-current configuration. The highest water recovery by the kraft paper and composite membrane was achieved (approximately 15 mgH2O/cm2.h) for the input gas with the highest humidity. The dehumidification performance of kraft paper as a porous and hydrophilic membrane was slightly better than that of the composite membrane containing a dense hydrophilic polymer thin film in most cases. A relatively low heat transfer coefficient was found for the module, which was increased by using higher gas flow rates at higher humidity conditions.

As a kind of industrial hazardous solid waste, paper mill sludge (PMS) was hard to treated by conventional process because of its high moisture, high organic content and and high environmental risk. The hydrothermal liquefaction (HTL) shows excellent potential for the conversion to a wide variety of organic matter with high water contents including various kinds sludge into fuels or value-added chemicals. In this paper, the liquefaction potential for PMS under different reaction temperatures were investigated, and the products were classified into several main components based on the results of GC-MS. The results showed that the highest yield of bio-oil was 44 % (wt/wt dry PMS without ash) at 340 °C with simply compound composition. And the bio-oil product has above 26 % long chain hydrocarbon and 22 % cycloketones. It has potential for conversion to biomass platform compounds. It can be used as bio-fuel for heat recovery of alkali recovery system of paper mill. So, adjusting different reaction temperatures of HTL, the properties of products can meet the different requirements for platform chemical and/or bio-oil fuel.

The potential health and environmental impacts associated with the improper management of chemically treated wood waste demands the adoption of recycling, and disposal practices. Chemically treated wood waste has several physical and chemical properties which makes it usable for the manufacture of another product to multiple use, among which the production of paper and fuel. This paper presents the initial life cycle assessment (LCA) study on wood waste used for paper production. The study boundary is limited with raw materials (raw wood or waste wood) processing and paper production itself, thus corresponds to “gate-to-gate” life cycle with a special focus on life cycle inventory data on waste wood treatment via hydrolysis process. The results of the analysis demonstrate competitiveness of the waste wood use for paper production vs. raw wood in such environmental categories as human health and ecosystem quality.

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations.

Paper-based electronics offer a simple and cost-effective means to fabricate flexible devices. Here, we report an efficient pen-on-paper approach to construct metasurfaces on paper with silver units. Further, paper-based metasurfaces are employed to shield the electromagnetic interference which create new opportunities in turning waste paper into a solution for eliminating electromagnetic pollution. Experimental measurements and simulations show that waste paper-based metasurface manufactured in this way exhibits remarkable electromagnetic shielding properties with small thickness (thickness reduced more than 90% compared with that of traditional shielding materials), which makes it an ideal candidate for specific frequency electromagnetic filters. In addition, it can be readily extended to other regions of the electromagnetic spectrum, widened the shielding band by simply scaling the silver units' sizes and utilizing appropriate three-dimensional structures. Having taken performance into consideration, production is also taken into account. Paper-based shields offer both economic and energy benefits when considered on electronic printing, in addition, environment friendly nature and pliability of paper as well as simple fabrication procedure make paper-based metasurfaces promising candidates for the future ‘green’ electronics.

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided.

Recycled paper mill sludge (RPMS) was hydrothermally treated by subcritical water (SBW) in two modes of operation, namely semi-continuous and batch, at temperatures in the range 150–250 °C, and 100 bar. The performance of both systems was analyzed in terms of degree of hydrolysis, product yield and formation of degradation products. The highest degree of RMPS hydrolysis was achieved using the batch reactor configuration, while in the semi-continuous system higher yields of water soluble compounds (WSC) and monosaccharides were achieved. By using the semi-continuous system at 100 bar, 250 °C and a water flow rate of 5 mL/min, 40% of the organic carbon content of RPMS was recovered in the form of soluble compounds. Additionally 20% of total carbohydrates and 75% of total lignin of RPMS were recovered as soluble material. Detailed mass balances performed for both operational modes revealed that under batch mode, the naturally occurring compounds found in RPMS underwent significant transformation, generating derivatives referred to as degradation products. An analysis of the severity factor was performed for both operational modes. It was concluded that significant values of WSC were only obtained for severity factors higher than four.

This work assesses six different agricultural residues with the aim of finding alternative raw materials for a soda semichemical pulping process: stems of bell and chili pepper ( Capsicum annuum ), broad bean ( Vicia faba ), asparagus ( Asparagus officinalis ), pea ( Pisum sativum ), and okra ( Abelmoschus esculentus ). Pulping yields higher than 60% (m/m) were obtained, except for pea stems (43%). The drainability of all the pulps, expressed as the Schopper-Riegler index (oSR), had values of over 70 oSR. The Kajaani analyses of the fibers showed acceptable fiber lengths in all cases (0.64–0.92 mm), but on average shorter than the lengths of pulps from a commercial fluting paper (Old corrugated Container, OCC), that was found to be 1.27 mm. Handsheets of paper were produced both with the pulps under study and with mixtures of these pulps with OCC pulp. Several properties were measured to assess the use of the new fibers in a paper for cardboard production. The property showing the greatest differences was the Gurley porosity, ranging from 25 mL/min (asparagus) to 1300 mL/min (broad bean). Of the six residues tested, the okra residue fiber showed better properties than the commercial paper fiber (Concora Medium Test indexes: 1.5 N m 2 /g and 1.1 N m 2 /g respectively, Burst Indexes: 2.3 kPa m 2 /g and 1.7 kPa m 2 /g, respectively), yielding similar mechanical properties to those of high quality fibers obtained from miscanthus ( Miscanthus giganteus ). Broad bean residue could also be a promising raw material, though its properties are not as good as okra’s.

International audience; An energy audit is a primary step toward improving energy efficiency at the facility level and ensuring a clean production. The pulp and paper sector is one of the most energy-intensive industries in Morocco. This article aimed at identifying energy conservation opportunities at a Small and Medium-sized paper industry. The audit results together with their financial viability are presented regarding the analysis of energy consumption and electrical quality issues. The paper introduces an action plan for a more efficient energy use of some specific applications such as furnaces and compressed-air installations as well. The recommended energy efficiency measures have the potential of saving about 347.85 MWh of electrical energy and 101.78 MWh of thermal energy corresponding to reductions of 11.48% and 2.22%, respectively. The total investments related to the application of the action plan is approximately 290.53 kMAD and the global payback period does not exceed one year. It was also shown that a total quantity of 283.39 t of CO2 emissions can be saved annually.

Pulp and paper production is a highly energy intensive process and improvement of energy efficiency in this process is considered as promising measures for reducing industrial greenhouse gases emissions (GHG). This study focuses the Pakistan's pulp and paper industry which consumes around 7% of the country's industrial energy and contributes to over 317,269 tonnes of CO 2 emissions. With rising demands for fuels and consequently as harp increase in CO 2 emissions due to the growth of the paper sector in Pakistan, this article aims to analyse the energy efficiency and carbon dioxide emissions reductions potential through the incorporation of cogeneration technologies. The cogeneration technologies studied are agas turbine, steam turbine and combined cycle and are evaluated from the energetic and economic point of view to propose a best suitable technology for each paper mill. The proposed cogeneration technologies are selected on the basis of high energy utilisation factor, as implepayback period of five years or less with least Annualised life cycle cost. The result shows that a theoretical energy saving potential equivalent to 16.9% of the actual thermal energy requirement of mills can be achieved through cogeneration which will lead to 14.3% reduction of the present carbon emissions levels in Pakistan's paper sector.

China's paper production accounted for nearly a quarter of the world's total paper production in 2010. In this study, 23 energy saving technologies applicable to the pulping and papermaking process in China are identified and analyzed. The conservation supply curve (CSC) method is employed to assess the technical and economic aspects of energy conservation. The fuel CSC for Chinese pulp and paper industry shows the cost-effective and technical fuel conservation potential is 180 PJ and 254 PJ, accounting for 27% and 38% of total fuel used in 2010, respectively. The CO 2 mitigation potential related to the cost-effective fuel efficiency is 17 Mt CO 2 and the technical potential is 24 Mt CO 2 . The electricity CSC shows the technical electricity conservation potential is 2316 GWh, representing 4% of total electricity consumption. All of the electricity efficiency measures are shown to be cost-effective in this study. The CO 2 mitigation resulted from electricity efficiency is around 2 Mt CO 2 . In addition, sensitivity analyses for the parameters of penetration rate, discount rate, and energy price are conducted to assess their influence on the final results.

The application of anaerobic digestion is mounting worldwide because of its economic and environmental benefits. As a concern, the rate and extent of the anaerobic digestion of pulp and paper mill sludge was tested using the biochemical methane potential (BMP) with different food/microorganisms (F/M) ratio. The study was evaluated at five different F/M ratios (i.e. 0.5, 1.0, 1.5, 2.0, 2.5). In addition to that reaction kinetics and the influence of biodegradability were also evaluated for the biomethane potential of substrates. The highest cumulative methane yield was obtained in F/M ratio 2.0 with 3.4 L followed by F/M ratio 1.5 and 2.5 with 3.3 L and 2.9 L, respectively. The maximum methane production rate 3.66 L CH4 was perceived as per kinetics. The biomass activity may be affected due to the high substrate concentration during BMP test of lower F/M ratios. On the other hand, F/M ratio greater than 2.0, methane yield was decreased due to increased volatile fatty acid production reduces the reactor pH and inhibits methanogens activity.