Search

This study evaluates the impact of sales promotions that are featured in store flyers distributed by prominent retailers and their capacity to attract consumers to their establishments. A distinctive conceptual framework is introduced that scrutinizes the influence of ethically-minded consumer behavior, digital citizenship/literacy, and a retailer's orientation toward environmental sustainability and explicit ecological concerns. A quasi-experimental design was used to formulate four distinct scenarios from a possible set of eight, stemming from the combinations of three variables: 2 Retailer Positioning (green vs. without explicit ecological claims) × 2 Flyer Mediums (paper vs. digital) × 2 Discount Levels (5% discount vs. 30% discount). Through an online survey, a sample of 269 responses was garnered to gauge consumer reactions to these store flyers, evaluating their attitudes and receptiveness. The findings suggest that attitudes toward paper flyers were more favorable when presented by non-green retailers compared to their green counterparts. This can be attributed to a perceived inconsistency between a green brand positioning and the use of paper flyers. Furthermore, the propensity to transition to digital flyers was notably stronger for green retailers compared to non-green retailers, but this inclination was most pronounced when higher discounts were offered. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

The International Paper Conservation Seminar has now been held as four face-to-face events and four online events. It is a three-day international event delivered in Spanish and Portugese with keynote talks from national and international conservation professionals from Mexico to Chile presenting projects covering works on paper in diverse formats including documents, photographs historic books, and artworks. Countries such as Argentina, Chile, Bolivia, Peru, Ecuador, Mexico, Paraguay, Uruguay, Colombia, Brazil, Spain and Costa Rica have sent delegates to discuss both the social and cultural aspects of conservation work. The seminar is a completely free event for its attendees. It is intended to be suitable for all, with high-level talks addressing issues of management, preservation, conservation, restoration and disaster recovery among many others. From the third event onwards, training workshops for basic treatments have been developed, with the participation of recognized conservation professionals from universities and international institutes, allowing the number of attendees to remain constant since the Covid-19 pandemic. It creates networks and fosters collaboration for professional and institutional projects. The seminars have generated a connected and active community of paper conservators in the region, aware of our limitations, and capable of solving problems collaboratively and according to local resources. [ABSTRACT FROM AUTHOR]

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

The pulp and paper industry stands out as an example of a technology based on a renewable resource, cellulose. The sludge, however, poses major environmental and public health problems. To effectively manage the sludge wastes, it is critical to fully evaluate its composition, possible environmental impacts, and the total amount of exploitable renewable resources. The study established the pH of the sludge to be 7.32 ± 0.98, an electrical conductivity (1.84 mS/cm), nitrogen concentration (2.65 ± 0.21%), and total organic matter (41.23 ± 3.11%). The cellulosic content was established to be 74.07 ± 2.71% which contributes to 53.07 ± 1.23% water holding capacity (WHC). The most abundant elements were C and O, followed by Cl, Si, Al, and Mg, with lower concentrations of S, Si, K, and iron. The polycyclic aromatic compounds (PAHs) levels ranged from 0.29 to 322.56 ng.g-1 with 1-methyl pyrene posting the highest concentration (322.56 ng.g-1. XRD peaks at 17.10°, 23.86°, 30.14°, and 36.57°, which imply the existence of CaCO3. SEM indicated that the sludge was majorly comprised of fibers materials with average particle sizes of 280 micrometers. TGA/DTG analysis showed that the sludge had the greatest cellulose and hemicellulose (64.7 wt. %). [ABSTRACT FROM AUTHOR]

This article introduces a flexible and easy-to-implement open-ended scientific inquiry activity called the Paper Towels Challenge. After experimentally determining which of three unbranded paper towels is the most absorbent, students discuss their results and methods. The teacher facilitates the discussion of epistemological issues. This activity can be used regardless of the participants' age or country to promote science understanding, NGSS science and engineering practices, and twenty-first century skills, such as critical thinking and communication. The many uses, benefits, and possible adaptations of the activity are discussed. [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

The history of subjects is often told analysing notions of knowledge in historical reforms, policies, curricula, and textbooks. In this article, we analyse student papers from 1968, focusing on their responses to the topic 'Social distinctions and prejudices in Denmark'. The students present a number of concepts and categories of social differences and prejudices, depict a contemporary problem, refer to theoretical or categorical frameworks, provide a historical account, state bold claims and/or present conceptual definitions. Then, by giving different examples from their everyday life and by establishing some form of line or structure in their writings, they form an argument or narrative. They do this by using—we assume—information from their textbooks, from what have been discussed in teaching, in the public debate, and in the students' homes. The student papers not only passively reflect but are part of the ongoing constitution of the subjects and subject matter, during a period of tremendous educational change. [ABSTRACT FROM AUTHOR]

This white paper consists of evidence-based recommendations for conducting forensic interviews with children. The recommendations are jointly drafted by researchers in child interviewing active within the European Association of Psychology and Law and are focused on cases in which children are interviewed in forensic settings, in particular within investigations of child sexual and/or physical abuse. One particular purpose of the white paper is to assist the growing Barnahus movement in Europe to develop investigative practise that is science-based. The key recommendations entail the expertise required by interviewers, how interviews should be conducted and how interviewers should be trained. Interviewers are advised to use evidence-based interview protocols, engage in hypothesis-testing and record their interviews. The need to prepare the interview well and making efforts to familiarise the child with the interview situation and create rapport as well as acknowledging cultural factors and the possible need for interpretation is underscored, and a recommendation is made not to rely on dolls, body diagrams and the interpretation of drawings in the interviews. Online child interviewing is noted as showing promising results, but more research is warranted before conclusive recommendations can be made. Interviewers should receive specialised training and continuous feedback on their interviews. [ABSTRACT FROM AUTHOR]

Cellulose filter paper (CFP) was modified with poly(acrylic acid) (PAA) and/or poly(ethylene glycol)methacrylate (PEGMA), followed by Cu immobilization for 4-nitrophenol (4NP) reduction. Among these samples, Cu-immobilized CFP modified with PEGMA polymer (CFP@PEGMA-Cu) exhibited the highest Cu incorporation of 2.21%. Those having the copolymer (CFP@PAA-co-PEGMA-Cu) demonstrated the highest efficiency, completing 4NP reduction in 3 min with an impressive 99.45% conversion, a high-rate constant (k) of 27.5 × 10−3 s−1, and turnover frequency (TOF) of 18.36 h−1. Notably, the catalysts containing PAA maintained good reusability, preserving 97% conversion upon 9 cycles. These results suggest their promising applications in sustainable catalysis, offering the catalytic potential with simple preparation and low cost required. [ABSTRACT FROM AUTHOR]

This paper discusses the relevance of using physical situations to introduce the concept of angles at elementary school. We compare the effectiveness of two geometry teaching sequences. In the first one (physical sequence), the pupils learned the angle concept by experimenting on the playground (i.e. mesospace) and then modelling the situation. In the second one (paper-and-pencil sequence), the pupils worked solely in the space of a sheet of paper (i.e. microspace). In both sequences, pupils compared areas of space delineated by an angle between two directions. Pupils in two Grade 3 classes were exposed to one of the two teaching sequences. The unfolding of these sequences was videotaped and analyzed, and the pupils were tested individually, before and after teaching, to measure each sequence's effectiveness. Results showed that both sequences are effective to grasp the angle concept: Most pupils overcame the common erroneous conception of comparing angles' sides' lengths instead of angle openness. The comparison of areas of space delineated by an angle between two infinite directions, which is the two sequences' common core, seems to be the key factor underlying angle conceptualization. This paper ends with a discussion of these results' teaching implications and the merits of each sequence. [ABSTRACT FROM AUTHOR]

A descriptive annotated bibliography is presented of recent selected publications dealing with the reported health benefits and risks of fish and seafood consumption; fish and seafood including farmed and wild-caught finfish, crustaceans, mollusks, and seaweeds. The bibliography is presented in four parts, namely (1) review papers dealing with both the health benefits and risks of fish and seafood consumption, (2) specific papers dealing with health benefits related to: antioxidants; bone health; brain and mental health; cancer prevention; diabetes prevention; elderly and senior adults; fermentation; heart health and hypertension; immune response and allergies; infant and child health; lipids, fatty acids and sterols; minerals and trace elements; obesity and overweight reduction; polysaccharides; pregnancy and gestational health; proteins, peptides and amino acids; and vitamins and bioactive compounds; (3) specific papers dealing with health risks related to: algal blooms and shellfish biotoxins; antibiotics use and residues; cancer risks; chemicals; chronic kidney disease; microbial quality and safety; microplastics; minerals and heavy metals; parasites and pathogens; pesticides and persistent organic pollutants; public perception and media; seafood allergy; and smoking risks; and (4) supporting papers dealing with consumption advisories and dietary guidelines; improved decontamination and processing methods; and fish, food and nutrient security. A total of 552 papers are presented together with their annotated summaries. On the basis of the papers presented in this review, it is believed that the higher nutritional value and health benefits derived from increased fish and seafood consumption far out-way the potential negative risks to human health, and as such fish and seafood represent a valuable and much healthier alternative than processed fast-foods and many terrestrial animal food products in the global fight against heart disease and related health ailments. [ABSTRACT FROM AUTHOR]

Medication prescription procedures were reviewed at psychiatric residential treatment centers (RTC), and a quality improvement project was conducted in order to implement integrated electronic medical records (EMR) and computerized provider order entry (CPOE). To assess the impact of preexisting prescribing practices on RTCs, surveys were sent anonymously to current and past providers of regional and local RTCs. The surveys assessed the impact of the prescribing protocol on workflow, the frequency of medication errors, the impact such errors had on patient care, the overall provider satisfaction, and the discrepancies between electronic and paper charts. Current providers were then re-surveyed after implementing the integrated CPOE system in May 2020, during the COVID-19 pandemic. The first round of provider survey results revealed that the majority of staff (n = 10, 70%) observed frequent medication errors and were largely dissatisfied with the current medication ordering and administration process (n = 10; 70%). Incident Response Improvement System (IRIS) reports revealed the most common medication errors were omissions, incorrect dosing, and incorrect medications administered. After the initiation and implementation of the CPOE, staff satisfaction increased with the process (n = 14; 50%) noting that medication errors were less frequent than before (n = 14; 50%). [ABSTRACT FROM AUTHOR]

The purpose of this note is to point out a problem related to stress-strength models in some published papers. This difficulty has occurred in the asymptotic variance of the maximum likelihood estimator of the stress-strength parameter. The asymptotic variance will be studied in general and then in the mentioned papers. Finally, the correct version of asymptotic variance is computed. [ABSTRACT FROM AUTHOR]

The apps for drawing are present in our children's life. Nevertheless, little is known about the impact of mobile technology on the freehand drawing educational activity. There are few works which are contextualised within short periods of time, with teachers who are not theirs and, in some cases, outside the children's classroom. In this paper, we are focussed on the use of technology on freehand drawing activity. Thus, we have compared the graphics produced by 4- and 5-year-old children with paper&crayon in comparison with those with tablet-finger. Children made the drawings during a planned free-drawing activity, in their ordinary classrooms, with their teachers and during five sessions. Assessment of drawings has evidenced tablet feasibility for making graphics. Nevertheless, with the passing of time, quality of graphics (tablet-finger vs paper&crayons), are nearly matched, demonstrating the low impact level technology has on this activity. In addition, if drawings are analysed specifically according to ages, results have shown that both groups have to develop adaptation strategies of visual perceptual skills and fine motor skills for the touch screen in order to obtain the same quality in the drawings made on both support types. [ABSTRACT FROM AUTHOR]

This article is a response to Amanda Kottler's paper on the concept of multiple self-states and the role of writing in understanding clinical moments. The author, Joye Weisel-Barth, discusses the symbolic presence of Isobel in Kottler's paper and how it represents a hidden self-state that brings about transformative experiences. Weisel-Barth also explores the use of fiction as a tool for self-discovery and emphasizes the importance of aesthetic engagement in uncovering hidden aspects of oneself. The article highlights the power of writing and imagination in gaining a deeper understanding of the self, and encourages readers to consider the broader implications of psychoanalysis in understanding the self and its connection to the surrounding environment. [Extracted from the article]

This study aims to explore how e-textbooks with emotional design affect students' emotion, cognitive load and learning achievement. There were 147 freshman students in total: the experimental group I, II and control group consisted of 49, 47 and 51 students, using e-textbooks with emotional design, without emotional design and traditional paper textbooks. The results reveal the following: Students' emotion after using e-textbooks with emotional design is more positive than those using e-textbooks without emotional design and paper textbooks. Students' cognitive load after using e-textbooks with emotional design is significantly lower than those using etextbooks without emotional design. Students' learning achievement after using two types of e-textbooks is better than after using paper textbooks. Comparing all types of textbooks altogether, emotion has a significantly positive correlation with learning achievement, and both emotion and learnng achievement are significantly and negatively correlated with cognitive load. For the three types of textbooks, the relationship between emotion and learning achievement all becomes not significantly correlated. For two types of e-textbooks, cognitive load and learning achievement become not significantly correlated, disturbed by the digitalization of textbooks. Instructors are suggested to firstly adopt e-textbooks with emotional design, those without emotional design secondly, and paper textbooks rank last. [ABSTRACT FROM AUTHOR]

Iron-impregnated filter paper (Fe-Pi) was evaluated as phosphorus (P) extractant in four soils of Ogun state, southwest Nigeria in a screenhouse experiment. The experiments lasted for 8 weeks. Soil P contents were extracted at 0, 4, and 8 weeks after the incorporation of amendments (cattle manure, poultry manure, and wood ash) using Fe-Pi, Bray-1, Bray-2, Mehlich-1, Hunter, and Olsen extractant. Agronomic variables were taken fortnightly from grown maize plants and later harvested at 8 weeks, residual effects of the treatments were also evaluated. Maize dry matter weight (DMW) and P uptake were also measured. Results indicated that a linear relationship existed among the extractants with significant coefficient at p ≤.001. Fe-Pi established a strong relationship with the conventional extractants in the following order: Bray-1 (R2 = 0.99) > Bray-2 (R2 = 0.98) > Hunter (R2 = 0.96) > Mehlich-1 (R2 = 0.86) > Olsen (R2 = 0.82). Fe-Pi had a significant relationship with P uptake and DMW. Phosphorus uptakes under the animal manure amendments were statistically higher than uptake in control and woodash amended soils. Therefore, the study concluded that Fe-Pi was a good predictor of plant available P and had significant relationship with Bray-1, thus it could be considered for the estimation of soil available P in soils of southwest Nigeria. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic had an exceptionally long and consequential rally effect in China. Drawing on an eight-wave nationwide survey, this article shows that the Wuhan lockdown boosted public confidence in the central government. The persistence of the pandemic and the initial success of the zero-COVID policy sustained the enhanced trust in the central government for over two years. However, the rally effect did not dissipate as quietly as usual. As trust in the central government returned to the pre-pandemic level following the Shanghai lockdown, defiant protests collectively known as the White Paper Movement broke out. Angry protesters demanded the termination of the zero-COVID policy and called for accountability from the ruling party and its top leader. This article argues that while the rally effect lasted exceptionally long in the authoritarian country, it could not be prolonged indefinitely. Ultimately, the dissonance between the declining trust in the central government and the persisting restrictive measures provoked the protests. [ABSTRACT FROM AUTHOR]

Objective: Some attorneys claim that to adequately cross examine neuropsychological experts, they require direct access to protected test information, rather than having test data analyzed by retained neuropsychological experts. The objective of this paper is to critically examine whether direct access to protected test materials by attorneys is indeed necessary, appropriate, and useful to the trier-of-fact. Method: Examples are provided of the types of nonscientific misinformation that occur when attorneys, who lack adequate training in testing, attempt to independently interpret neurocognitive/psychological test data. Results: Release of protected test information to attorneys introduces inaccurate information to the trier of fact, and jeopardizes future use of tests because non-psychologists are not ethically bound to protect test content. Conclusion: The public policy underlying the right of attorneys to seek possibly relevant documents should not outweigh the damage to tests and resultant misinformation that arise when protected test information is released directly to attorneys. The solution recommended by neuropsychological/psychological organizations and test publishers is to have protected psychological test information exchanged directly and only between clinical psychologist/neuropsychologist experts. [ABSTRACT FROM AUTHOR]

Production planning and scheduling in the pulp and paper industry can be very challenging. In most cases, practitioners address the production planning process manually, which is time-consuming and sub-optimal. This study deals with production planning encountered in a pulp mill company involving different wood species, parallel heterogeneous lines, inventory limits, sequence-independent setup times and preventive maintenance. To tackle the problem, an efficient mixed-integer formulation is proposed that optimizes when, where and how much to produce of different wood species and schedules preventive maintenance to minimize the total setup times. Several computational experiments are conducted to solve a case study in a pulp mill company in Chile. The results show the capability of the model to support the decision-making process in the pulp and paper industry, providing an efficient tool for practitioners to solve the problem in a reasonable amount of time. [ABSTRACT FROM AUTHOR]

This study aims to determine the lipophilic component that affects the quality of pulp and paper products in wood of 10-year-old Anthocephalus cadamba (families 23, 11 and 6) and 5-year-old Anthocepalus macrophyllus (families 75, 85 and 2). The results showed that the main group of compounds that appeared frequently and were identified in the lipophilic fraction were fatty acids (palmitic, oleic, linoleic and stearic acids), fatty alcohols (eicosanol, heneicosanol and tetracosanol), sterols (β-sitosterol and campasterol), hydrocarbons (hexadecane, tricosene and cyclotetracosane), aldehydes, alongside minor amounts of triterpenoid. F11 and F2 can be promoted as raw materials for pulp and paper, while F6 and F75 are not recommended because of the high levels of lipids such as sterols, triterpenoids, hydrocarbons, fatty acids, and fatty alcohols. [ABSTRACT FROM AUTHOR]

Xuan paper is one of the most famous handmade papers in China and is an important paper for conservation. However, the evenness of Xuan paper has not yet received much attention. In this study, the distribution of the in-plane grammage and mechanical properties of Xuan paper are measured. It is found that the distribution of the in-plane grammage and mechanical properties of Xuan paper is uneven. In the handmade direction, the grammage and mechanical properties of Xuan paper are overall largest in the lower area, followed by the upper and middle areas. The sheet forming process of Xuan paper has an important effect on the distribution of in-plane grammage, mechanical properties, and fiber orientation of Xuan paper. The folded state has a negative effect on the mechanical properties of the folded area of Xuan paper. This study will help raise awareness of the unevenness in physical properties of Xuan paper, which is important in both conservation and research applications. [ABSTRACT FROM AUTHOR]

For many centuries, paper is the main material for recording cultural achievements all over the world. Infrared (IR) spectroscopy is an essential analytical tool for the structural analysis of paper and pulp chemistry. This review article introduced recent technical and scientific reports in terms of IR spectroscopy in the paper science and application, where interest had increased during the last couple decades (2000–2022). Five parts were described according to the application of IR spectroscopy: the analysis of cellulose and its derivatives, estimation the date of documents, identification the origins of fiber or paper, specification the chemical and physical properties of paper, and characterization the new materials of paper. [ABSTRACT FROM AUTHOR]

"Hitler Youth Quex: A Guide for the English-Speaking Reader" is a book by William Gillespie that explores the infamous propaganda film made during the early years of the Nazi regime. The book provides new insights into the film and its historical context, drawing from the author's extensive collection of German film materials. While the book primarily focuses on the German perspective, it offers valuable primary sources and encourages critical examination of the topic. It is recommended for scholars and students studying film history, propaganda, or German Third Reich cinema. [Extracted from the article]

This project interrogates the United States’ national fixation on the answer to the question: Who are you? In this article, it is posed that identity documentation practices arising out of the Chinese Exclusion Act era cast identity as an empirical and immutable phenomenon, specifically in response to the racialization of American-born Chinese settlers as duplicitous, through the mechanisms that information is collected, the actual information itself, and the cross-references or connections created between cases. Through tracing this lineage, racialized identification data is identified and theorized as part of hegemonic data regimes. [ABSTRACT FROM AUTHOR]

An optimised method was established for the determination of four chloropropanols in paper straws, namely 1,3-dichloropropan-2-ol(1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP), 3-monochloropropane-1,2-diol (3-MCPD) and 2-monochloropropane-1,3-diol (2-MCPD). After extraction with a food simulant, purification with matrix solid phase dispersion (MSPD), and derivatisation using heptafluorobutyrylimidazole (HFBI), the chloropropanols were analysed by gas chromatography–tandem mass spectrometry (GC-MS/MS), and quantified with a deuterated internal standard. Under the optimised conditions, the limit of detection (LOD) was 0.200 µg/L for the four target compounds. The recoveries were in the range of 71.4% – 119.4% with relative standard deviations (RSDs) of 0.4% – 9.9%. The method fulfilled the requirements of the European regulations for the quantification of 3-MCPD and 1,3-DCP. Fifteen paperboard straws were tested using the proposed method. The results showed that 1,3-DCP and 3-MCPD exhibited the highest detection rate among the four chloropropanols tested (93.3%). the method can be used to detect chloropropanol contamination in paperboard products, and further to guide food manufacturers to reduce the levels of chloropropanols in paperboard food contact materials. [ABSTRACT FROM AUTHOR]

Lead pollution may cause serious damage to environment safety and human health, especially to children's growth. In this work, by using double stranded DNA (dsDNA) as the recognition element, a simple and effective electrochemical DNA sensor has been developed on a full carbon-based substrate, reduced graphene oxide/carbon paper (rGO/CP), to accomplish the rapid, sensitive and selective determination of Pb2+. Carbon paper (CP) provides a suitable substrate for the sensor with high portability and low cost, while rGO is easily electrodeposited onto CP and serves as both the signal amplification element and the molecular bridge between DNA and CP. Because of its high specific surface area and unique conjugated giant π structure, rGO tightly binds with DNA through π-π stacking and hydrophobic interactions, thereby providing loading of high quantities of DNA. The specific coordination between DNA and Pb2+ further improves the sensitivity of the sensor. The results demonstrate that rapid electrochemical enrichment of Pb2+ is achieved using the constructed CP/rGO/DNA electrode with a linear relationship between the peak current and the concentration of Pb2+ from 1 pM to 100 pM and a detection limit of 1 pM. In addition, this approach shows good selectivity and satisfactory repeatability for river water analysis. A promising sensitive, low-cost, simply-fabricated, and portable full carbon-based electrochemical biosensing platform has been therefore provided for lead determination. [ABSTRACT FROM AUTHOR]

Michael Hillard's Shredding Paper: The Rise and Fall of Maine's Mighty Paper Industry is both a labor history of the paper industry and a political economy of corporate governance and class struggle in the United States. As a labor historian, Hillard has compiled thousands of hours of interviews with paper-industry workers and managers. As a political economist, he persuasively argues that contests over the distribution of surplus from the 1960s forward and shifts in paper-industry ownership led to the strike wave that began in the '60s and spread to every paper mill in Maine by the late 1980s. Rapacious practices by out-of-state owners challenged workers' moral compass as much as their material existence. Responding, paper workers developed a folk political economy and even a folk Marxism, creating the foundation for challenging working-class support for regressive economics. This review provides context for Hillard's claim while partially challenging it in a different context, the United States steel industry. [ABSTRACT FROM AUTHOR]

Innovative design of complex systems faces multi-contradiction (MC). The existing methods to solve MC are mainly based on the General Theory of Powerful Thinking (OTSM) which is independent of the classical Engineering Design Method (ED) to form the process model, they cannot inherit the accumulated knowledge and advantages of ED. This paper proposes a product innovation design process model for MC based on the function-structure model. It starts with an initial scenario of the system to build the function-structure model and MC network based on the root contradiction analysis. The network structure entropy and function importance decision methods are introduced for the trimming target confirming. The key contradiction-node is identified and solved by strategies of trimming based on internal and external resources of the system. The function-structure model in ED and trimming in TRIZ are combined to form an innovative design process for MC systems. The proposed method is evaluated in a case study of an innovative design of the girder bridge erector. [ABSTRACT FROM AUTHOR]

Cellulose nanofibrils (CNF) can be modified to be used as a coating on food paper packaging. Previous research on PVA/CNF composites showed a low viscosity, which impacted their performance on the coating paper process. To overcome this problem, a thickening agent, such as carboxymethyl cellulose (CMC), is needed. In this work, the effect of CMC on PVA/CMC/CNF nanocomposites was investigated by varying the concentrations of CMC with PVA/CMC and CNF ratio of 80:20 and 90:10. The nanocomposites were characterized by their physical and tensile properties which could affect their coating performance. Moreover, the coating process was conducted on paper and the performances of the coated paper were studied. The results showed that the increase in CMC concentration led to an increasing viscosity and good zeta potential, suggesting good dispersion. Moreover, the addition of CMC improved the tensile properties of PVA/CMC/CNF nanocomposites. However, SEM analysis of PVA/CMC-1:CNF (80:20) revealed the occurrence of agglomeration which might influence the performance of the coated paper. Interestingly, PVA/CMC-1:CNF (80:20) had an excellent water resistance, with the lowest Cobb60. Moreover, the addition of CMC 1 wt% increased WVTR, which remained lower than the blank sample. Meanwhile, PVA/CMC-2:CNF (80:20) demonstrated the best performance in the oil absorption and tearing resistance test. In summary, the addition of CMC can effectively improve the physical and tensile properties of the PVA/CMC/CNF, as well as the barrier properties and tear strength of the PVA/CMC/CNF coated paper. The results demonstrate the potency of this material as a coating for food packaging paper. [ABSTRACT FROM AUTHOR]

AbstractMilk is a major dietary source of calcium; thus, accurate and precise quantification of calcium in milk and other dairy products is necessary for quality control. Conventional instrumental methods are sensitive and accurate but require expensive instrumentation, sample pretreatment, skilled personnel, and a long detection time. Herein, a microfluidic paper-based analytical device (µPAD) was developed to quantify calcium ions (Ca2+) in milk using a smartphone as a detector. The method utilized a complexometric reaction between Ca2+ and ethylene diamine tetraacetic acid with murexide as an indicator. The response was the average color intensity at the detection zones measured using the Color Picker application. The proposed µPAD exhibited a good linear detection range (1 to 10 mM), a low detection limit of 0.42 mM, and a short analysis time of 2 min. The determination of Ca2+ in milk samples using the proposed µPAD was consistent with a potentiometric method. The proposed µPAD demonstrates many advantages, including rapid detection, acceptable accuracy, low cost, low sample volume, and suitability for on-site quantification of Ca2+ in real samples. [ABSTRACT FROM AUTHOR]

AbstractThe peroxidase-like properties of a graphene oxide/platinum-cobalt nanocomposite and the rapid color development mechanism of 3,3′,5,5′-tetramethylbenzidine (TMB) through the decomposition of ·OH from H2O2 were utilized to prepare a nonlabelled, simple, and sensitive paper-based colorimetric sensor. This sensor allows visualization of the results and instantaneous detection, enabling quantitative measurement of H2O2. The graphene oxide/platinum cobalt composite was synthesized using a two-step procedure. Its properties were investigated using transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDS). The composite was subsequently transferred onto a paper substrate to create the colorimetric sensor. The optimal catalytic conditions were a composite concentration of 201.17 µg/mL, a color development time of 3 min, a TMB concentration of 2 mmol·L−1, and a pH of 4. Using the optimal conditions, the paper-based colorimetric sensor has a linear range for H2O2 from 1.0 × 10−5 to 0.1 mol·L−1, with a limit of detection of 1.0 × 10−6 mol·L−1 which is comparable or better than comparable methods. This paper-based colorimetric sensor has potential applications for the rapid determination of hydrogen peroxide. [ABSTRACT FROM AUTHOR]

A novel approach for paper drying using airborne ultrasound technology is presented. A unique experimental setup is developed, and a systematic study is conducted using 23 factorial design of experiments and Analysis of Variance. Three controlling factors are considered in the experiments including the initial moisture content, basis weight and refining condition. The outcome of the experiments is compared to a previous work on direct-contact ultrasonic drying of paper. The results confirm that similar to direct-contact, for airborne ultrasonic drying, the basis weight/thickness of the sample is the most important factor in ultrasonic drying and it is followed by the effect of initial moisture content. Using linear regression model, a correlation for predicting the total time of ultrasonic drying is provided. Quality of the dried samples is evaluated, and the permeability measurements confirmed the effect of pore characteristics on ultrasonic drying. The analysis for energy consumption reveals that airborne ultrasonic drying is more efficient at higher moisture contents. [ABSTRACT FROM AUTHOR]

This note is based on hitherto untapped visual resources (photographs, presentation albums, and scrapbook) on post-World War I Russian refugees in Istanbul that belong to the Anna Mitchell Papers, which were gifted to the Hoover Institution Library and Archives at Stanford University in 1967. [ABSTRACT FROM AUTHOR]

Gas chromatography – tandem mass spectrometry (GC-MS/MS) using formic acid as a protective agent is reported for the determination of acrylic resin monomers in food contact packaging paper. The analytes were extracted by ethanol mixed with formic acid with 2-phenylethyl propionate as the internal standard. The extract was separated by a 6% cyanopropylbenzene-94% dimethylsiloxane ultra-inert chromatographic column and analyzed by GC-MS/MS in multiple reaction monitoring (MRM) mode. 13 acrylic resin monomers including acrylic acid, styrene, and acrylic ester were separated. The procedure was successfully applied for the analysis of real samples. The procedure provided a linear calibration range with detection limits from 0.16 to 0.46 mg kg−1. The mean recoveries were from 88.1% to 100.9% with relative standard deviations less than 5.4%. The residual acrylic resin monomers in packaging paper were primarily from printing base paper and varnish. Of the acrylic resin monomers, the monomers except for butyl acrylate and 2-ethylhexyl acrylate showed low migration rates. The method provides high sensitivity and good reproducibility with simple pretreatment, demonstrating application for monitoring acrylic resin monomers in food contact packaging paper. [ABSTRACT FROM AUTHOR]

The mechanical properties of fiber metal laminates (FML) are influenced by several various factors. Interface adhesion plays a particularly crucial role in interlaminar strength. Enhancing the interlaminar strength of carbon fiber reinforced aluminum laminate (CARALL) composites present a persistent challenge due to inherent weaknesses between metal and composite elements. Therefore, this study focuses on improving the interlaminar performance of CARALL composites by introducing cellulose paper interlayer at the metal/composite interface. The cellulose paper interlayer offers the advantage of being cost-effective and sustainable. Cellulose paper-interleaved CARALL composites were fabricated by vacuum bagging method and exhibited noteworthy improvements in mechanical properties. Comparative analysis with pristine samples revealed substantial enhancements, including a 15% increase in tensile strength, a remarkable 42% improvement in flexural strength, and a significant enhancement in mode-I fracture toughness by 65%. Furthermore, the cellulose paper interleaving played a crucial role in stabilizing fracture formation at the fiber-matrix interface, with mode II fracture toughness witnessing a 3% increase. Visual examination revealed the underlying toughening processes occurring in the interfacial area. This innovative approach of interleaving laminated composites with cellulose paper emerges as a sustainable and effective strategy, demonstrating the potential to fortify and toughen the interlaminar zones of CARALL composites. [ABSTRACT FROM AUTHOR]

AbstractThe present paper is the second of three, constituting a whole project of translation and commentary composed of translated extracts from the “Catalogo n. 2 – Le madri di tutte noi,” published by the Milan Women’s Bookstore in 1982. The idea for the project was conceived by Silvia Niccolai and Angela Condello, who selected the extracts and provide the written commentaries on the original texts. The Yellow Catalogue, in which we find collective discussions, pages of personal diaries and, overall, the enterprise of a group of women debating over their literary symbolic mothers (who to read? And why?), is an interesting example of political use of literature. After forty decades from its publication, it still proposes inspiring and fresh suggestions for feminist political action and critique, while representing an interesting occasion for researching the philosophical roots of Feminism. The projects is composed like follows: Paper No1, In search of a feminine symbolic, by Angela Condello, already published on Law & Litterature and Paper No2, From Novels to the Figures, themes and strategies for a political practice. Paper No 2 is structured in two parts. Part One is the article here presented (Part One. “Interest in Reality.” For every woman’s autobiography) written by Silvia Niccolai; Part Two is the article Sexual difference: an occasion for being, coauthored by Angela Condello and Silvia Niccolai, which will be published in a forthcoming issue of this Journal. [ABSTRACT FROM AUTHOR]

In this short response to the papers appearing in this special issue (Technology, AI Bots and Psychotherapy After Covid), psychotherapist and author Aaron Balick draws on the variety of themes that have arisen within the contributed papers to reflect on the wider issue of computer mediated human relations. In it he makes a distinction between the papers that focus on the therapeutic process mediated by technology and those that look more broadly at the paradigm of therapy practice in this context. Framing technology as a tool, the author pulls together both strands to explore what psychotherapy research may say about the broader issues of societies mediated by technology and how therapeutic research may contribute to these larger social issues. [ABSTRACT FROM AUTHOR]

This study investigated an under-researched source of measurement error in high-stakes examinations, namely mistakes in examination papers (e.g. multiple-choice questions containing more than one correct answer). Such mistakes (henceforth errors) are important, as they can undermine students’ performance in the examination, while also eroding public confidence in the examination system. In light of this, this study sought to understand what gives rise to such errors. To this end, it drew upon in-depth interviews with 36 assessment professionals with knowledge and experience of the examination paper construction process. Through illuminating the demands of the paper construction process and the characteristics of the people who are involved in it, this investigation identified a number of ‘active’ and ‘latent’ human failures that can lead to errors in examination papers. The article argues that, to minimise the risk of error in examination papers, efforts to ‘adapt’ people to the demands of the paper construction process should be carefully combined with efforts to adapt the paper construction process to people requirements. Apart from contributing new knowledge to the field, the study’s findings have also practical implications: examination providers can use them to optimise their paper construction processes to enhance the quality of their assessment instruments. [ABSTRACT FROM AUTHOR]

mHealth applications (apps) are tools that can enhance research by efficiently collecting and storing large amounts of data. However, data collection alone does not lead to change. Innovation and practice change occur through utilisation of evidence. The volume of data collected raises questions regarding utilisation of data by nurses and midwives, and how data from mHealth apps can be used to improve person-centred practice. There is limited empirical evidence and a lack of direction from global health authorities to guide nurses and midwives in this area. To describe strategies for nurses and midwives that could enhance the effective use of data generated by mHealth apps to inform person-centred practice. The purpose of this paper is to stimulate reflection and generate actions for data utilisation when using mHealth apps in nursing research and practice. This discussion paper has been informed by current evidence, the integrated-Promoting Action on Research Implementation in Health Services (i-PARIHS) framework, and research experience as part of doctoral study. Before engaging in data collection using mHealth apps, nurses and midwives would benefit from considering the nature of the evidence collected, available technological infrastructure, and staff skill levels. When collecting data and interpreting results, use of a team approach supported by engaged leadership and external facilitation is invaluable. This provides support to operate apps, and more importantly use the data collected to inform person-centred practice. This paper addresses the limited available evidence to guide nurses and midwives when using mHealth apps to collect and use data to inform practice change. It highlights the need for appropriate technology, external facilitative support, engaged leadership, and a team approach to collect meaningful evidence using mHealth apps. Clinicians, leaders, and researchers can apply the strategies provided to enhance the use of mHealth apps and ensure translation of evidence into practice. [ABSTRACT FROM AUTHOR]

We have achieved a successful synthesis of a label-free, flexible, portable, and colour-indicating biosensor using cholesteric nanostructure liquid crystals (LCs), commonly referred to as cholesteric LCs (CLCs), on paper fibres. This innovative approach holds significant promise for rapid screening in precision medicine and other applications. We incorporated optically active nematic LCs in various configurations within CLCs, allowing them to rotate along different axes. When exposed to light, these LCs reflected light at specific wavelengths. By employing polarised optical microscopy and a charged couple device (CCD), we conducted titration experiments with bovine serum albumin (BSA) on the paper substrate and quantified protein concentrations based on the observed colour shifts. Utilising internal Python pixel analysis software, we evaluated the red, green, and blue colour components, which served as biomarkers for different BSA concentrations. Our results demonstrated a linear correlation between BSA concentration and colour variations. This CLC-based paper-substrate biosensor exhibits the potential to efficiently screen a large number of samples, thereby enhancing the diagnostic accuracy in clinical settings. Combining the colour-indicating and quantifiable attributes of CLCs with the affordability and portability of paper substrates, we have developed a versatile biosensor. Its ease of use, rapid response, and high sensitivity make it a promising tool for future disease detection endeavours. [ABSTRACT FROM AUTHOR]

Predatory publishing is the unethical and dishonest behavior of publishers who take advantage of researchers by charging them too much money and not providing good editing and peer-review services. Scholars, publishers and policymakers are seeking solutions to combat predatory publishing, which has become a major academic problem. This research paper provides a bibliometric analysis of the citation patterns and trends in the predatory publishing literature. The study analyzed the 100 top-cited papers on predatory publishing and provided insight into the types of documents, journals, authors, and countries that contributed to this field. The average citation per paper in the top 100 selected publications was 53.67. Open-access publications received a significantly higher average citation per paper than subscription-based papers. "Article" was the major type of document published, followed by "Notes," "Reviews" and "Editorials." Nature and Learned Publishing were the journals that contained the highest number of top-cited articles. J. Beall and D. Moher authored the highest number of papers, while A. Grudniewicz had the highest average citation per paper. USA and Canada were the top countries in these top-cited publications. This study will be beneficial to the all the stakeholders who may be interested in this area of research. [ABSTRACT FROM AUTHOR]

This paper investigates retracted articles indexed in the Scientific Electronic Library Online (SciELO) Brazil, using bibliometric techniques to identify the characteristics of these retractions and relevant citation trends. All records of retracted articles from the first record in October 2004 to April 2022 were included. Sixty-seven retractions and 870 citations pre- and post-retraction were analyzed. Results indicate a change of scenario that began in 2015, with recurrences of retracted articles allegedly produced by paper mills. The prevalence of retractions derived from professional misconduct in health research and the frequency of post-retraction citations in health sciences raise concerns in the chain of stakeholders, public health, and scientific development. [ABSTRACT FROM AUTHOR]

We investigate two research questions using a recent statewide transition from paper to computer-based testing: first, the extent to which test mode effects found in prior studies can be eliminated; and second, the degree to which online and paper assessments offer different information about underlying student ability. We first find very small mode effects for a more recent transition in Massachusetts. Second, we investigate the predictive evidence of validity for paper and online tests for predictions of future test scores and grades. We generally find minimal differences for the extent to which scores on paper tests can differentially predict future online versus paper test scores. Finally, online and paper test scores are similarly predictive of future grade point average. We conclude that the online test penalty can vary substantially by test and that extreme care should be taken when administering online tests to some students and paper tests to others. [ABSTRACT FROM AUTHOR]

My comments concern the significant errors in the crystallographic part of the commented paper. The diffraction patterns are erroneously analysed and the final chemical composition is different than those supposed in the paper. There are also some manipulations with data. [ABSTRACT FROM AUTHOR]