Search

In this paper, a new delayed fractional-order model including susceptible migratory birds, infected migratory birds and predators is proposed to discuss the spread of diseases among migratory birds. Fear of predators is considered in the model, as fear can reduce the reproduction rate and disease transmission rate among prey. First, some basic mathematical results of the proposed model are discussed. Then, time delay is regarded as a bifurcation parameter, and the delay-induced bifurcation conditions for such an uncontrolled system are established. A novel periodic pulse feedback controller is proposed to suppress the bifurcation phenomenon. It is found that the control scheme can successfully suppress the bifurcation behavior of the system, and the pulse width can be arbitrarily selected on the premise of ensuring the control effect. Compared with the traditional time-delay feedback controller, the control scheme proposed in this paper has more advantages in practical application, which not only embodies the advantages of low control cost and easy operation but also caters to the periodic changes of the environment. The proposed control scheme, in particular, remains effective even after the system has been disrupted by a constant. Numerical simulation verifies the correctness of the theoretical results. [ABSTRACT FROM AUTHOR]

This work investigates a prey–predator model featuring a Holling-type II functional response, in which the fear effect of predation on the prey species, as well as prey refuge, are considered. Specifically, the model assumes that the growth rate of the prey population decreases as a result of the fear of predators. Moreover, the detection of the predator by the prey species is subject to a delay known as the fear response delay, which is incorporated into the model. The paper establishes the preliminary conditions for the solution of the delayed model, including positivity, boundedness and permanence. The paper discusses the existence and stability of equilibrium points in the model. In particular, the paper considers the discrete delay as a bifurcation parameter, demonstrating that the system undergoes Hopf bifurcation at a critical value of the delay parameter. The direction and stability of periodic solutions are determined using central manifold and normal form theory. Additionally, the global stability of the model is established at axial and positive equilibrium points. An extensive numerical simulation is presented to validate the analytical findings, including the continuation of the equilibrium branch for positive equilibrium points. [ABSTRACT FROM AUTHOR]

Active suspension technique normally provides the best vibration mitigation performance at the cost of high-energy consumption. In contrast, the energy consumption of a semi-active suspension is normally much smaller than that of an active suspension, whereas the control performance is compromised as well. Observing the core issue that caused such a phenomenon is that the existing semi-active control force, unlike the active control force, shall always oppose to the relative motion of the actuator (i.e. clipping phenomenon). This paper subsequently proposes a novel semi-active vehicle suspension system that incorporates a passive negative stiffness (NS) spring and a semi-active damper (SD) to realize uncompromised active control force while consuming energy of a typical semi-active suspension system. In specific, the proposed system allows for decomposition of the target active control force and tracked via the collaboration of the NS and SD components. Herein, the NS element is capable of releasing the store potential energy that subsequently eases the aforementioned clipping phenomenon of a traditional semi-active suspension. In this paper, besides the relevant clarifications on the system topology and working mechanism, its feasibility and performance enhancement are also validated via systematic numerical simulations of a vehicle suspension; and the results indicate, for the first time, that the proposed semi-active suspension can fully track the active control force and subsequently achieve unprecedented control performance comparable to an active controller. [ABSTRACT FROM AUTHOR]

In this paper, we study the dynamic behaviors and chaos synchronization of the Chen system described by Caputo–Hadamard fractional derivative. First, the existence and uniqueness of a solution to the Chen system with Caputo–Hadamard derivative are proved by qualitative analysis. Further, the stability of equilibria of the considered system is analyzed with the aid of Routh–Hurwitz criteria. Meanwhile, the bifurcation condition of the Caputo–Hadamard Chen system is compared with the integer-order Chen system, where the differences between the two systems are demonstrated numerically. In the study of chaos synchronization of the drive–response Chen systems with Caputo–Hadamard derivative, two control schemes are developed: three nonlinear controllers and single linear controller. The feasibility of two control schemes is verified, and the synchronization performances of these two schemes are compared by numerical simulations. Based on this, the influence of the fractional-order on chaos synchronization performance is illustrated as well. [ABSTRACT FROM AUTHOR]

The paper aims to perform numerical simulations of flapping flight using Discrete Vortex Method (DVM) scheme. The scheme is suitable for moderately low Reynolds number (< ∼ 1 0 5) and computationally less expensive as the flow domain doesn't need to be discretized at each time step. Flapping of a one-dimensional (1D) flexible filament in a two-dimensional (2D) inviscid flow is simulated. The effect of bending by varying the wing shape along the spanwise length on aerodynamic performance was studied. It is observed that compared to rigid wings, bending wings are found to be better in generating lift. The effect of various bending wing configurations (F 1 , F 2 , F 3 and F 4) and different methods of imposing the bending (W 1 , W 2 and W 3) is studied. It was demonstrated that applying wing bending only during the downstroke phase (W 2) is more effective than imposing bending throughout the flapping cycle (W 1). Moreover, an effort is made to replicate the bending configuration observed in manta ray fish (W 3) to investigate its impact on flow domain characteristics, lift, and thrust forces. Furthermore, the inclusion of a winglet is found to significantly enhance lift generation. In addition to the study of bending effects on aerodynamic performance, the study also seeks to emulate a unique aspect of bat flight kinematics, specifically the dynamic variation in wing span length during flapping. In a comparative analysis of two span length variation strategies, it is discerned that exclusively varying span length during the upstroke phase is the optimal approach for achieving increased lift generation. The study highlights the crucial role of wing bending and span length modulation in achieving elevated lift forces while simultaneously reducing drag. These findings are seen as holding significant promise for the design and optimization of Micro Air Vehicles (MAVs) utilizing flapping-based lift generation mechanisms, contributing substantially to the identification of optimal parameters for enhancing MAVs' aerodynamic performance and operational efficiency. [ABSTRACT FROM AUTHOR]

This paper proposes a two-dimensional modified Leslie–Gower predator–prey model with carry-over effects, fear, prey protection and additional food, including prey harvesting. For this, it assumes the carry-over effect with delay incorporated in the birth rate of the prey population and gestation delay in Leslie–Gower term of a predator, and supposes that the predator consumes the prey according to Holling type II functional response. This dynamical system is split into two groups, namely non-delayed and delayed systems, respectively. In the non-delayed system, first, we discuss positivity, boundedness solutions, and the existence of equilibria, especially finding the coexistence of interior equilibrium points under certain conditions. After that, local and global stabilities are systematically analyzed. In addition, we obtain the conditions of Hopf-bifurcation in terms of the growth rate of prey species, prey protection and preference rate of predator for the non-delayed system. Whereas in the delayed system, both the delays have an essential role in governing the dynamical system discussed in three cases, and each case found the Hopf-bifurcation parameters for which the system changes stability behavior into instability. At last, the numerical simulations have been carried out to verify the theoretical findings. [ABSTRACT FROM AUTHOR]

A mathematical model has been proposed to consider two distinct forms of psychological pressure that arise due to the COVID-19 situation and their impact on individuals' lives, including their mental well-being and happiness. For a more realistic situation, the effect of stochasticity should be taken into account. Hence, our paper mainly investigates the effect of stochastically environmental variability on the transmission dynamics of psychological stress. We obtain two thresholds ℛ s 1 and ℛ s 2 . If ℛ s 1 > 1 , the psychological stress will persist and there will be a unique stationary distribution; whereas if ℛ s 2 < 1 , the extinction of psychological stress is obtained. Moreover, we display the mean first passage time from the initial value to the state of disappearance in order to examine the impact of environmental disturbances; meanwhile, we conduct numerical simulations to illustrate the theoretical findings. [ABSTRACT FROM AUTHOR]

In this paper, the dynamical behaviors of a discrete-time fractional-order population model are considered. The stability analysis and the topological classification of the model at the fixed point have been investigated. It is shown that the model undergoes flip and Neimark–Sacker bifurcations around the co-existence fixed point by using the bifurcation and the normal form theory. These bifurcations lead to chaos when the parameter changes at critical point. In order to control chaotic behavior in the model result from Neimark–Sacker bifurcation, the OGY feedback method has been used. Furthermore, some numerical simulations, including bifurcation diagrams, phase portraits and maximum Lyapunov exponents of the presented model are plotted to support the correctness of the analytical results. The positive Lyapunov exponents demonstrate that chaotic behavior exists in the considered model. [ABSTRACT FROM AUTHOR]

This paper investigates a two-species amensalism model that includes the fear effect on the first species and the Beddington–DeAngelis functional response. The existence and stability of possible equilibria are investigated. Under different parameters, there exist two stable equilibria which means that this model is not always globally asymptotically stable. Together with the existence of all possible equilibria and their stability, saddle connection and close orbits, we derive some conditions for transcritical bifurcation and saddle-node bifurcation. Furthermore, global dynamics analysis of the model is performed. It is observed that under certain parameter conditions, when the intensity of the fear effect is below a certain threshold value, as the fear effect increases it will only reduce the density of the first species population and will have no influence the extinction or existence of the first species population. However, when the fear effect exceeds this threshold, the increase of the fear effect will accelerate the extinction of the first species population. Finally, numerical simulations are performed to validate theoretical results. [ABSTRACT FROM AUTHOR]

In this paper, we introduce constant-yield prey harvesting into the Holling–Tanner model with generalist predator. We prove that the unique positive equilibrium is a cusp of codimension 4. As the parameter values change, the system exhibits degenerate Bogdanov–Takens bifurcation of codimension 4. Using the resultant elimination method, we show that the positive equilibrium is a weak focus of order 2, and the system undergoes degenerate Hopf bifurcation of codimension 2 and has two limit cycles. By numerical simulations, we demonstrate that the system exhibits homoclinic bifurcation and saddle–node bifurcation of limit cycles as the parameters are varied. The main results show that constant-yield prey harvesting and generalist predator can lead to complex dynamic behavior of the model. [ABSTRACT FROM AUTHOR]

In this paper, a reliable and effective local discontinuous Galerkin (LDG) scheme for numerically solving the classical Rosenau–Hyman equation with non-periodic boundary conditions has been proposed. This study employs the third-order nonlinearly stable total variation diminishing Runge–Kutta method and the LDG method, respectively, to discretize the temporal and spatial derivatives. Finally, numerical simulations are performed on various test problems and compared with the exact results as well as results produced by a few other numerical methods, to analyze the reliability and efficiency of the proposed method. The results generated, which validate the expected order of accuracy, are presented through multiple tables. In addition, several graphical representations of the problem are presented to depict the behavior of the solution. [ABSTRACT FROM AUTHOR]

Many discrete systems have more distinctive dynamical behaviors compared to continuous ones, which has led lots of researchers to investigate them. The discrete predator–prey model with two different functional responses (Holling type I and II functional responses) is discussed in this paper, which depicts a complex population relationship. The local dynamical behaviors of the interior fixed point of this system are studied. The detailed analysis reveals this system undergoes flip bifurcation and Neimark–Sacker bifurcation. Especially, we prove the existence of Marotto's chaos by analytical method. In addition, the hybrid control method is applied to control the chaos of this system. Numerical simulations are presented to support our research and demonstrate new dynamical behaviors, such as period-10, 19, 29, 39, 48 orbits and chaos in the sense of Li–Yorke. [ABSTRACT FROM AUTHOR]

In this paper, we aim to minimize the epidemic size of tungiasis disease and economic costs simultaneously, with terminal demands for infected humans. A human–jigger parasite control system with four control schemes for humans and jiggers is established. We propose a multi-objective optimal control problem with terminal constraints, in which the accumulated number of infected humans and control costs are involved. By applying the modified normal boundary intersection algorithm and the interior point scheme, numerical simulations for different combinations of control schemes are carried out, and actual data in Madagascar are used. Effective combination schemes are indicated from the perspectives of disease eradication, cost saving and time saving. Once these effective combinations are properly performed, the disease can be controlled. When only minimizing the epidemic size, the combination of the optimal treatments and adulticiding efforts is the best choice in the rainy season; the combination of the optimal personal protections and treatments is the preferential option in the dry season. When only minimizing the economical cost, the combination of the optimal adulticide and larvicide is the better selection in the rainy season; the combination of the optimal personal protections, treatments and adulticiding efforts is the prior choose in the dry season. Thus, there is a trade-off between the two objectives for all the effective combinations, decision-makers may choose an appropriate one to control the disease. [ABSTRACT FROM AUTHOR]

In this paper, we consider a spatially size–stage-structured population dynamics model with resting phase. The primary objective of this model is to study size structure, stage structure, resting phase and spatial location simultaneously in a single population system. At first, we reformulate the problem as an abstract nondensely defined Cauchy problem. Then, taking advantage of the integrated semigroup and bifurcation theories, we investigate the stability and Hopf bifurcation at the positive equilibrium of the model. Finally, numerical simulations are presented as evidence to support our analytical results. A discussion of related problems is also presented briefly. [ABSTRACT FROM AUTHOR]

The micromixer is an important prerequisite for realizing the function of the microfluidic chip system. Micromixers are mainly used in protein crystallization, biological reactions, drug delivery and other fields. Efficient micromixers enable fast bioreaction processes. In this paper, according to the principle of plane geometry, micromixers with three different structural obstacles, circular, equilateral triangle and square, are designed to study how to improve the mixing efficiency of the micromixer. In this paper, the influence of the obstacle structure on the mixing efficiency and pressure drop of the micromixer is analyzed. Through numerical simulation, the results show that when Re = 100, the mixing efficiency of the circular obstacle micromixer is up to 97.4%, and the pressure drop is 15,789.597 Pa. In addition, this paper analyzes that the use of cylindrical obstacles can make the fluid generate horizontal and vertical vortex flow, break the usual laminar flow, and significantly improve the mixing efficiency. [ABSTRACT FROM AUTHOR]

In this paper, we study a network-based SIR epidemic model with a saturated treatment function in which a parameter α is introduced to measure the extent of the effect of the infected being delayed for treatment. Our aim is to present a global analysis and to investigate how the parameter α affects the spreading of diseases. Our main results are as follows: (1) In the case of the threshold value R 0 < 1 , there exist two values of α : α c and α 0 , such that the disease-free equilibrium is globally asymptotically stable when α ≤ α c and multiple endemic equilibria exist when α ≥ α 0 . This means that the parameter α has an essential influence on the spreading of the disease. (2) In the case of the threshold value R 0 > 1 , if the model has only one endemic equilibrium, then the unique endemic equilibrium is globally attractive. In this case, it is also proved that if α ≤ α c , then the endemic equilibrium has only one, so is globally attractive. In addition, numerical simulation is performed to illustrate our theoretical results. [ABSTRACT FROM AUTHOR]

This paper examines a three-dimensional delayed discrete neural network model analytically and numerically to determine the existence of different types of bifurcations of the involved fixed points. The model exhibits different bifurcations such as pitchforks, flips, Neimark–Sackers, and flip-Neimark–Sackers. The critical coefficients are used to determine the structure of each bifurcation. The curves are calculated and plotted for each bifurcation when the parameters are changed. Further, these bifurcations are theoretically analyzed and numerically verified. From the obtained results, we observed that by drawing the curves associated with each bifurcation, the numerical simulations are consistent with the analytical results. [ABSTRACT FROM AUTHOR]

In this paper, we consider a Leslie–Gower type reaction–diffusion predator–prey system with an increasing functional response. We mainly study the effect of three different types of diffusion on the stability of this system. The main results are as follows: (1) in the absence of prey diffusion, diffusion-driven instability can occur; (2) in the absence of predator diffusion, diffusion-driven instability does not occur and the non-constant stationary solution exists and is unstable; (3) in the presence of both prey diffusion and predator diffusion, the system can occur diffusion-driven instability and Turing patterns. At the same time, we also get the existence conditions of the Hopf bifurcation and the Turing–Hopf bifurcation, along with the normal form for the Turing–Hopf bifurcation. In addition, we conduct numerical simulations for all three cases to support the results of our theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper focuses on the dynamics of a submerged compound pendulum (SCP). The considered pendulum consists of a horizontal cylindrical element at its lowermost portion and a plate between the cylindrical element and the pivot. An approximate analytical expression for the natural frequency of the submerged compound pendulum is proposed. Further, a two-dimensional (2D) numerical model of the pendulum is developed using ANSYS (FLUENT). The natural periods of the SCP are determined for different geometric configurations. The analytically estimated natural periods of the pendulum match well with those obtained from numerical simulation. [ABSTRACT FROM AUTHOR]

The isolation technologies are adopted to protect the long-span space structures from serious damage under the action of earthquakes. When the isolation system is applied to the space structures, both horizontal and vertical vibration control effects on the structures should be concerned. In this paper, a two-dimensional earthquake isolation and mitigation device (TEIMD) composed of a high-damping viscoelastic (VE) core pad and VE dampers is proposed. Based on the dynamic shear experiment results of the VE damper, the energy dissipation capability of VE material is preferable. Then, the nonlinear equivalent stiffness and equivalent damping ratio of the TEIMD in horizontal and vertical directions are evaluated by using the numerical simulation method. The TEIMDs are arranged on the column top of a double-layer grid structure to assess the isolation effectiveness of the novel device. The dynamic analysis results of the double-layer grid structure with and without TEIMD reveal that this novel device can significantly reduce the acceleration response of the upper grid by relying on the strong energy dissipation performances in the horizontal and vertical directions. This research also verifies the feasibility of applying the TEIMD to the double-layer grid structure, which can effectively dissipate the vertical vibration energy of the structure. [ABSTRACT FROM AUTHOR]

This paper presents an innovative and efficient method for solving the fractional-order Van der Pol impulsive system. In particular, the proposed scheme utilizes finite difference techniques for approximating fractional integrals, and its efficacy is compared to existing integration methods presented in the literature. Moreover, the proposed approach is applied to fractional impulsive systems, specifically the Fractional Van der Pol system with impulse behavior. The results demonstrate the effectiveness of the impulsive treatment effects for the system under consideration. In general, this study offers an insightful contribution to the field of fractional calculus, while providing a practical and efficient solution for solving impulsive systems. [ABSTRACT FROM AUTHOR]

This paper considers predator–prey systems in which the predator adapts the search speed to prey's density. The prey admits the cost of fear because of the predator and moves between source–sink patches to escape from predation. Using dynamical systems theory, we demonstrate equilibrium stability, uniform persistence and bifurcations in the system. It is shown that enhancing the search speed of predator and/or decreasing prey's dispersal from the source to sink could promote persistence of the system, while increasing the fear cost would stabilize the system. Moreover, dispersal could make the prey persist in both source–sink patches, even drive the predator into extinction. The dispersal could also make the prey reach a total population abundance larger than that without dispersal, even larger than the carrying capacity. Asymmetry in dispersal plays a role in the persistence and abundance. A novel finding of this work is that dispersal may lead to results reversing those without dispersal. Numerical simulations illustrate and extend our results. This work is important in understanding complexity in predation systems. [ABSTRACT FROM AUTHOR]

In this paper, rich dynamics and complex bifurcations of an SIR epidemic model with saturated incidence rate and strong Allee effect are investigated. First, the existence of disease-free and endemic equilibria is explored, and we prove that the system has at most three positive equilibria, which exhibit different types such as hyperbolic saddle and node, degenerate unstable saddle (node) of codimension 2, degenerate saddle-node of codimension 3 at disease-free equilibria, and cusp, focus, and elliptic types Bogdanov–Takens singularities of codimension 3 at endemic equilibria. Second, bifurcation analysis at these equilibria are investigated, and it is found that the system undergoes a series of bifurcations, including transcritical, saddle node, Hopf, degenerate Hopf, homoclinic, cusp type Bogdanov–Takens of codimensional 2, and focus and elliptic type Bogdanov–Takens bifurcation of codimension 3 which are composed of some bifurcations with lower codimension. The system shows very rich dynamics such as the coexistence of multiple periodic orbits and homoclinic loops. Finally, numerical simulations are conducted on the theoretical results. [ABSTRACT FROM AUTHOR]

In this paper, we propose and investigate a delayed diffusive predator–prey model affected by toxic substances. We first study the boundedness and persistence property of the model. By analyzing the associated characteristic equation, we obtain the conditions for the existence of steady state bifurcation, Hopf bifurcation and Turing bifurcation. Furthermore, we also study the Hopf bifurcation induced by the delay. Finally, our theoretical results are verified by numerical simulation. The numerical observation results are in good agreement with the theoretically predicted results. Theoretical and numerical simulations indicate that toxic substances have a great impact on the dynamics of the system. [ABSTRACT FROM AUTHOR]

The spread of infectious diseases often presents the emergent properties, which leads to more difficulties in prevention and treatment. In this paper, the SIR model with both delay and network is investigated to show the emergent properties of the infectious diseases' spread. The stability of the SIR model with a delay and two delay is analyzed to illustrate the effect of delay on the periodic outbreak of the epidemic. Then the stability conditions of Hopf bifurcation are derived by using central manifold to obtain the direction of bifurcation, which is vital for the generation of emergent behavior. Also, numerical simulation shows that the connection probability can affect the types of the spatio-temporal patterns, further induces the emergent properties. Finally, the emergent properties of COVID-19 are explained by the above results. [ABSTRACT FROM AUTHOR]

Recurrence lacunarity has been recently proposed to detect dynamical state transitions over various temporal scales. In this paper, we combine suggested distribution moments and introduce multifractal recurrence lacunarity to unearth rich information of trajectories in phase space. By considering generalized moments, it provides an enhanced measurement to account for differences of black pixels in the recurrence plot at various scales. Numerical simulations have proved that the proposed method is able to differentiate varying types of time series and provide further insights of inherent features including stochastic series, chaotic maps and series contaminated interference components. In real-world applications, it performs well on quantifying the subtle structural changes of financial time series. In addition, it is intriguing to confirm that corrugation signals possess much more vivid information of heterogeneity in terms of recurrence plots than normal ones. [ABSTRACT FROM AUTHOR]

The study of rumor propagation dynamics is of great significance to reduce false news and ensure the authenticity of news information. In this paper, a SI reaction-diffusion rumor propagation model with nonlinear saturation incidence is studied. First, through stability analysis, we obtain the conditions for the existence and local stability of the positive equilibrium point. By selecting suitable variable as the control parameter, the critical value of Turing bifurcation and the existence theorem of Turing bifurcation are obtained. Then, using the above theorem and multi-scale standard analysis, the expression of amplitude equation around Turing bifurcation point is obtained. By analyzing the amplitude equation, different types of Turing pattern are divided such as uniform steady-state mode, hexagonal mode, stripe mode and mixed structure mode. Further, in the numerical simulation part, by observing different patterns corresponding to different values of control variable, the correctness of the theory is verified. Finally, the effects of different network structures on patterns are investigated. The results show that there are significant differences in the distribution of users on different network structures. [ABSTRACT FROM AUTHOR]

Based on the feature of piecewise linear (PWL) functions, a nonlinear feedback of a higher-order system can be transformed to an approximately equivalent PWL function so as to ease system implementation in engineering. As an example, a cubic feedback term can be approximately equivalently transformed to be a PWL function. Since the PWL function can be expressed by many simple functions such as signum function and absolute-valued function, the cubic term can be approximately equivalently replaced with these functions. Consequently, the method of approximate equivalence is employed in the JCS-08-13-2022 (JCS) chaotic system for simple circuit design and implementation. In this approach, the widely used multipliers are avoided and the circuits become more economical and also more robust. In this paper, the cubic Chua's resistor is equivalently approximately replaced by a PWL function. To show the effectiveness of the approximate equivalence, numerical simulations are demonstrated and verified by circuit implementation. [ABSTRACT FROM AUTHOR]

This paper analyzes an allelopathic phytoplankton competition model, which was proposed by Bandyopadhyay [Dynamical analysis of a allelopathic phytoplankton model, J Biol Syst14(02):205–217, 2006]. Our study refines the previous results and finds at most three positive equilibria for the system. The existence conditions of all positive equilibria and the corresponding stability cases are given in the paper. Interesting dynamical phenomena such as bistability, saddle-node bifurcation, and cusp bifurcation are found. It is shown that the rate of toxin releases heavily influences the positive equilibria of the system under certain conditions. Numerical simulations verify the feasibility of the theoretical results. [ABSTRACT FROM AUTHOR]

Hydrogen has received widespread attention as a new clean energy in order to reduce the carbon emissions of fuel vehicles. This paper studies a tubular microreactor based on methanol steam reforming. Methanol and steam are mixed in proportion and the chemical reaction takes place in a porous catalytic bed. For heating purposes, hot gas from the burner penetrates the reactor bed through heating tubes. Energy is supplied through the heating tubes to drive the endothermic reaction system. The microreactor is enclosed in an insulated jacket. In this paper, parameters such as methanol conversion and hydrogen concentration are evaluated by considering microreactor materials, heating gas temperature and flow direction, heating tube distribution, pressure drop and reaction channel length. First of all, choosing a microreactor material with a smaller thermal conductivity can avoid excessive heat loss, and improve heat transfer performance. Increasing the heating gas temperature leads to an increase in the temperature of the reaction zone, thereby increasing the CH3OH conversion rate and H2 mass fraction. Changing the flow direction of the heating gas affects the reaction rate, but has little effect on the reaction result. Through the research on the distribution of the heating tubes, the results show that the hydrogen production rate is higher when the contact area between the heating tubes and the reaction zone is larger. Secondly, through the comparison of the data under different pressure drops, the best parameter P = 5 0 pa is obtained, and the CH3OH conversion rate is 80.6% at this time. Finally, increasing the length of the reaction channel can make the reaction more complete. For example, when the reaction channel length L = 0. 3 9 m, the CH3OH conversion rate is as high as 83.7%. [ABSTRACT FROM AUTHOR]

A liquid bath vibrating vertically can lead to the emergence of a self-propelled walking droplet on its free surface, which can exhibit chaotic motion. It is well-known that trajectories of a chaotic system are sensitive to its initial condition, known as the "butterfly-effect", while its statistics normally remain stable to small disturbances: this type of chaos is called "normal-chaos". However, a concept called "ultra-chaos" has been recently introduced, whose statistical features are unstable, i.e. extremely sensitive to small disturbances. Up to now, a few examples of ultra-chaos have been reported. In this paper, the influence of tiny disturbances on the motion of walking droplet is investigated. It is found that both normal-chaos and ultra-chaos exist in the motion of the walking droplet. Different from the normal-chaotic motion, even the statistical properties of the droplet's ultra-chaotic motion are sensitive to tiny disturbances. Therefore, this illustrates once again that ultra-chaos indeed exists widely and represents a higher disorder compared with normal-chaos. The ultra-chaos as a new concept can widen our knowledge about chaos and provide us with a new point of view to study chaotic properties. It should be emphasized that, for an ultra-chaos, it is impossible to repeat any results of its physical experiments or numerical simulations even in the meaning of statistics! Unfortunately, reproducibility is a corner stone of modern science. Thus, the paradigm of modern scientific research might be invalid for an ultra-chaotic system. [ABSTRACT FROM AUTHOR]

The operator-splitting (OS) method for real-time substructure testing (RTST) provides explicit and unconditionally stable solutions for structures with softening type stiffness and damping has been widely used for precisely disclosing the seismic performance of structures with velocity-dependent specimens. However, the OS method for RTST provides only explicit target displacement and velocity but not an explicit target acceleration, so that it is essentially an implicit method for Dynamic real-time substructure testing (DRTST) with dynamic system specimens. For precisely disclosing the seismic performance of multiple-degree-of-freedom structures with dynamic system specimens, one improved OS method is proposed for DRTST in this paper. The methodology and stability of the proposed OS method are investigated, and the effectiveness of the proposed OS method is validated by numerical simulations and experimental tests. By using the predictor displacement, velocity, and acceleration approximations, the OS method is an explicit algorithm for DRTST. The stability analysis shows that the proposed OS method is conditionally stable for DRTST, and its stability limit decreases with the increase of the mass ratio and the stiffness ratio, while it increases first and then decreases with the increase of the damping ratio. The numerical and experimental results confirm the stability and accuracy of the OS method. The OS method for DRTST provides a practical and precise investigation strategy for structures with dynamic system specimens and may have broad application prospects in civil engineering. [ABSTRACT FROM AUTHOR]

In this paper, a discrete-time Ricker population model with the strong Allee effect is proposed, and its complex dynamic behavior is analyzed. First, the existence and asymptotic stability of the unique positive equilibrium are studied. Second, Neimark–Sacker and period-doubling bifurcations of this discrete model were carried out, and corresponding bifurcation conditions were obtained. Third, the pole placement method and the hybrid control strategy have been used to control the chaos produced by these bifurcations. Finally, we use MATLAB software to carry out some numerical simulations to analyze the rich dynamics of the system as well as to verify our theoretical results. [ABSTRACT FROM AUTHOR]

A new conservative chaotic system with a cubic root is constructed in this paper. The system has no equilibria. An offset parameter is introduced into the system. By modulating different offset parameters and corresponding initial conditions, multiple coexisting conservative chaotic attractors can be generated consequently. By replacing the offset parameter with an appropriate sign function, multiscroll conservative chaotic attractors can be generated effectively by connecting multiple coexisting chaotic attractors based on offset boosting. Moreover, the number of scrolls tend to be infinite. Finally, a novel chaotic circuit with a cubic root is designed successfully by connecting two multipliers in opposite directions. The hardware implementation of the chaotic circuit is also completed to further verify the existence of conservative chaos and the consistency with the numerical simulations. [ABSTRACT FROM AUTHOR]

In this paper, we are concerned with a diffusive templator model in chemical self-replication, which describes the process of an individual molecule duplicating itself. Firstly, the stability of non-negative constant equilibrium solution is introduced. Then the existence of Hopf bifurcation is proved. Particularly, the stability and the direction of Hopf bifurcation for the spatially homogeneous model are discussed. Furthermore, by space decomposition and implicit function theorem, it is shown that the system may undergo a steady-state bifurcation with a two-dimensional kernel. Finally, several numerical simulations are completed to demonstrate the theoretical results. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the complex dynamics of a mapping derived from a differential equation with simple time-periodic delay. Firstly, we calculate the truncated normal form of 1:1 resonance of the mapping at a degenerate fixed point and obtain an approximating system of the mapping by using Picard iteration. By analyzing the approximate system, we find that the mapping will undergo a 1:1 resonance at the degenerate fixed point. Secondly, the qualitative property and the stability of the degenerate fixed point are determined, which provide a new view to understand the dynamic of differential equation with simple time-periodic delay. However, the approximate system does not have the versal unfolding of the Bogdanov–Takens singularity of codimension 2. These phenomena show that simple time-periodic delay can support complex dynamics. Finally, a numerical simulation is carried out to verify the analytic results. [ABSTRACT FROM AUTHOR]

In this paper, a new three-dimensional chaotic system with two exponential nonlinearities is presented. The analysis of fixed points of the proposed system suggests existence of one hyperbolic index-2 spiral saddle-type fixed point. The proposed system fulfils Shilnikov criterion and nature of the chaos is found to be dissipative. Bifurcation diagrams, maximum Lyapunov exponents and Kaplan–Yorke dimension are examined through numerical simulations to investigate dynamics of proposed system. The hardware feasibility of the proposed system is illustrated through current feedback operational amplifier (CFOA)-based circuit implementation. The proposed circuit uses six CFOAs, two diodes to establish nonlinearity, eleven resistors and three capacitors. The absence of analog multiplier in the proposed circuit makes it superior to the existing counterpart in the sense that it does not require area and power-consuming active building block. To confirm the chaotic nature of the proposed circuit, LTspice simulations are done to obtain phase portraits which are found to be strange attractors and are topologically different from the shape of the existing attractors. Moreover, we have investigated the synchronization of the proposed chaotic system using adaptive control scheme and proposed CFOA-based complete circuit design of the adaptively synchronized system. Also, the effect of the tolerance of passive components and temperature on the behavior of the proposed chaotic circuit and the complete synchronization circuit has also been studied. It is found that the circuit is sensitive to the value of resistors and temperature to an extent and can work properly within their limits. [ABSTRACT FROM AUTHOR]

Micro-Electro-Mechanical System (MEMS)-based pressure sensors operating on the principle of piezoresistivity have found profound application in various fields like automobile, aerospace, aviation, biomedical and consumer electronics. Various research studies have been conducted to optimize the design of MEMS-based pressure sensors to meet specific requirements of different fields. Modification in the structure of the piezoresistors placed on these sensors has shown great effect in this regard. However, most of these improvements have been validated through fabrication and measurement, but there has been a lack of significant studies developing analytical models to explain these improvements. This paper studies the performance of a single-turn piezoresistor design on a square silicon diaphragm. The analytical model relates the dimensions of the single-turn piezoresistor on a square diaphragm to the output voltage, and hence, sensor sensitivity is laid out. The correctness of the relation is also validated through Finite Element Analysis (FEA) performed using COMSOL Multiphysics software. Hence, an optimized single-turn design is presented which achieves a sensitivity of 203.57 mV/V/MPa over a pressure range of 0–1 MPa. These results are then compared to work from existing literature. The comparison shows an improved performance which was achieved by optimizing the design through its derived analytical model. The proposed sensor can be utilized in disposable blood pressure measurement system where high sensor sensitivity is required. [ABSTRACT FROM AUTHOR]

This paper concerns the issue of fixed-time synchronization (FXTS) for complex networks composed of dynamical nodes with discontinuous dynamics, abbreviated as discontinuous dynamic networks, under the concept of Filippov solution. In terms of 1 -norm and 2 -norm, two types of simple control schemes without the linear feedback part are, respectively, designed to compel the considered discontinuous dynamic network to fixed-timely synchronize with a desired trajectory. By utilizing a novel two-stage analysis approach, some new FXTS criteria are derived. Compared with the existing research works, the established theoretical results not only are more relaxed, but also improve the estimation accuracy of synchronous settling time. Finally, the validity of the analytical results is verified via numerical simulations. [ABSTRACT FROM AUTHOR]

Optimal control technique is crucial to improve the yield of microbial fermentation production. In this paper, we propose a nonlinear control system with state-dependent impulses, where the impulsive volume of feeding glycerol and the critical concentration of glycerol for occurring impulse are the control variables, to formulate 1,3-propanediol (1,3-PD) fed-batch production process. We also discuss a quantity of important properties for this control system. Then, we analyze the sensitivity of system state with respect to the kinetic parameters. We further propose a constrained optimal control model governed by the control system with state-dependent impulses. The existence of the optimal impulsive controls is established. For solving this problem, we utilize an exact penalty method to transform the problem into an optimization problem with only box constraints. Moreover, an improved differential evolution method is developed to seek the optimal impulsive strategy. Finally, numerical simulation results demonstrate that, by using the optimal impulsive strategies, final 1,3-PD concentration is considerably increased under the nominal parameter values and disturbances of kinetic parameters have significant effects on the optimal final 1,3-PD yield. [ABSTRACT FROM AUTHOR]

For a three-dimensional chaotic system, little seems to be known about the perturbation of invariant algebraic surface and the center on this surface. This question is very interesting and worth investigating. This paper is devoted to analyzing the limit cycles from perturbed center (trivial and nontrivial equilibria) on the invariant algebraic surface of the unified Lorenz-type system (ULTS), which contains some common chaotic systems as its particular cases. First, based on the parameter-dependent center manifold, we obtain the approximate two-dimensional center manifold from the perturbation of invariant algebraic surface, as well as the two-dimensional system on this center manifold. Second, by applying the averaging method of third order to the above two-dimensional system, we show that under suitable perturbation of parameters of the ULTS, there is one limit cycle bifurcating from the perturbed center on the invariant algebraic surface of the ULTS, and the stability of this limit cycle is determined as well. By using the averaging method of fourth order, we show the same results with the averaging method of third order. Finally, numerical simulation is used to verify the theoretical analyses. [ABSTRACT FROM AUTHOR]

Rectangular concrete-filled steel tubular (RCFST) columns can be designed to have unequal wall thickness to maximize their resistance to combined axial and uniaxial bending loads. However, there is very little published research on their local–global interaction buckling behavior. This paper presents an efficient fiber-based simulation model for analyzing the inelastic interaction buckling of eccentrically loaded RCFST slender columns with unequal wall thickness. The model considers the progressive local–global interaction buckling, distributed plasticity, concrete cracking and crushing, second-order effects, and geometric imperfections. The mathematical model is programmed to compute not only the axial load–displacement responses but also the interaction curves of axial load and moment of slender RCFST columns. The simulation modeling is validated by experimentally measured data. The validated computer model is used to parametrically study the interaction local–global buckling responses of RCFST columns while the range analysis is conducted to identify the relative significance of key parameters. It is demonstrated that the proposed computer model accurately simulates experimentally measured responses. Hence, it can be used with confidence in practice to analyze and design RCFST slender columns fabricated with steel plates of unequal thickness. The existing design standard AS/NZS 2327:2017 provides acceptable strength predictions of RCFST slender columns and beam-columns while the procedure specified in Eurocode 4 overestimates their capacities. [ABSTRACT FROM AUTHOR]

The Keller–Segel model is a paradigm to describe the chemotactic mechanism, which plays a vital role on the physiological and pathological activities of uni-cellular and multi-cellular organisms. One of the most interesting variants is the coupled system with the intrinsic growth, which admits many complex nontrivial patterns. This paper is devoted to the construction of multi-spiky solutions to the Keller–Segel models with the logistic source in 2D. Assuming that the chemo-attractive rate is large, we apply the inner-outer gluing scheme to nonlocal cross-diffusion system and prove the existence of multiple boundary and interior spikes. The numerical simulations are presented to highlight our theoretical results. [ABSTRACT FROM AUTHOR]

The stochastic switching SIR epidemic model with saturated incidence and limited medical treatment is investigated in this paper. By using Lyapunov methods and Itô formula, we first prove that the system has a unique global positive solution with any positive initial value. Then combining inequality technique and the ergodic property of Markov switching, the sufficient conditions for extinction and persistence in the mean of the disease are established. The results demonstrate that increasing medical resources and improving supply efficiency can accelerate the transition from the persistent state to the extinct state. Meanwhile, the high incidence rate will slow down the extinction of the disease. Specially, the switching noise can induce the system to toggle between the extinct and persistent states. Finally, some numerical simulations are carried out to confirm the analytical results. [ABSTRACT FROM AUTHOR]

In this paper, a new mosquito population suppression model with stage and sex structure is constructed, which is composed of two sub-models switching each other. Sterile mosquitoes are released with period T and remain sexually active for time T ̄. For the case T ̄ < T , three thresholds T * , m * and c * are determined for the release period T and release amount c. According to the values of T and c in different ranges determined by these thresholds, we study the dynamical behavior of the system for different release strategies, mainly including the existence and stability of the mosquito-extinction equilibrium and positive periodic solutions. Finally, some numerical simulations are performed to illustrate our results. [ABSTRACT FROM AUTHOR]

This paper proposes a diffusive predator–prey model with Allee effect, time delay and anti-predator behavior. First, the existence and stability of all equilibria are analyzed and the conditions for the appearance of the Hopf bifurcation are studied. Using the normal form and center manifold theory, the formulas which can determine the direction, period and stability of Hopf bifurcation are obtained. Numerical simulations show that the Allee effect can determine the survival abundance of the prey and predator populations, and anti-predator behavior can greatly improve the stability of the coexisting equilibrium. [ABSTRACT FROM AUTHOR]

The anti-predator element because of fear from predator population in prey–predator models has an excellent significance and it is able to lessen the duplicate of prey population to a positive degree. In this paper, a delayed prey–predator model including fear effect and predator-taxis sensitivity is studied. Local stability and occurrence of Hopf bifurcation are analyzed by fixing the time delay as the bifurcating parameter. Then, a series of sufficient criteria for global stability is established by designing a suitable Lyapunov function. Furthermore, direction and stability of the Hopf bifurcation are studied. Lastly, numerical simulation outcomes are performed to confirm our theoretical findings. [ABSTRACT FROM AUTHOR]

In this paper, to explore propagation dynamics of computer viruses over the Internet, a delayed SLBRS (susceptible–latent–breaking-out–recovering–susceptible) model of computer viruses considering horizontal and vertical dissemination over Internet is studied. The basic reproduction number at which computer viruses are prone to be extinct or continue to exist is calculated with the help of the next generation matrix method. By choosing the time delay because of processing time consumed to recover the breaking-out computers as bifurcation parameter, a series of sufficient criteria for experience of Hopf bifurcation are derived. Specially, optimal strategies to control dissemination of computer viruses over Internet are established. Finally, numerical simulations for certificating correctness of our theoretical findings are carried out. The findings show that the exhibition of Hopf bifurcation has an important impact on prediction and control of the propagation of computer viruses over the Internet. [ABSTRACT FROM AUTHOR]

In this paper, we consider the Brusselator system with cross-diffusion-like coupling and study Turing bifurcation of its stable Hopf bifurcating periodic solutions. According to the Brusselator system's diffusivity, a formula is established to determine the Turing bifurcation of periodic solutions. Additionally, for the Brusselator system with cross-diffusion-like coupling, a proof method for its periodic solutions to generate Turing bifurcation is given. Finally, the theoretical results are further verified by numerical simulations. [ABSTRACT FROM AUTHOR]

In this research work, we proposed a modern structured packing (SP) with perforated sheets with a specific surface area of 860 m 2 / m 3 , which was determined using numerical techniques. This work aims to evaluate the major characteristics of PACK-860 for instance, height equivalent to a theoretical plate (HETP), dry pressure drop (DPD) and wet pressure drop (WPD). Additionally, the flow construction was defined for specific packing via computational simulation. To evaluate the value of HETP, DPD and WPD, the three-dimensional (3D) computational fluid dynamics (CFD) simulation with the Eulerian–Eulerian (EE) multi-phase method applied in this paper. According to the findings of this research, the performance of the mass transfer (MT), WPD and DPD was enhanced with the perforated-on sheets of packing. Based on the observation, numerical results are consistent well with the theoretical data which reveals the consistency of CFD tools for modeling methods to separation applications. [ABSTRACT FROM AUTHOR]