Search

In the European Union, increasing attention is already being paid not only to the development of renewable energy sources, but also to the establishment of solutions to achieve local energy self-sufficiency while increasing the role of citizens in managing the energy they generate. This approach is expected both to have a positive impact on the environment and the reduction of greenhouse gas emissions, and to enhance energy security—both in economic and civic terms by, i.a., combating energy poverty. The development of local energy communities promoted in the EU is supported i.a. by energy cooperatives. These contribute to the efficient harnessing of renewable energy potential in rural and urban-rural areas, and have been developing in Poland for several years now. In their previous studies, the authors of this research paper attempted to verify the generation (number, type and capacity of installed sources) and consumption (energy demand) configurations in which an energy cooperative would be a viable solution for prosumers who might establish it. However, over the past few years, the conditions for prosumers and the method of their accounting with the electricity seller have changed radically in Poland (shift from net metering to net billing). This situation has opened up space for further research and encouraged the authors to revisit the problem of analyzing the viability of establishing energy cooperatives in relation to the rules of operation of individual prosumers. This research was carried out for three scenarios, and the horizon of the analyses conducted and described extends to 2045. The comparative analysis included energy consumers without their own generation sources, prosumers with a photovoltaic generation installation covered by the net billing model, as well as a scenario involving prosumers' cooperation within an energy cooperative, which by law is settled in the net metering model. Conclusions from the research and simulations made it possible to confirm the claim that, despite changes in the rules of prosumer billing, developing energy independence in the energy community formula results in a significant reduction in the cost of purchasing electricity (even several times lower purchase costs in the timeframe analyzed) and can lead to a reduction in the payback time of investments in generation sources even by a factor of two. The results presented in this research paper open up space for further research. The outcomes allow us to assume that energy cooperatives—in the organizational and institutional model in Poland—are a good tool for reducing the phenomenon of energy poverty on a local scale. [ABSTRACT FROM AUTHOR]

Currently, one of the main goals is to make municipal wastewater treatment plants (WWTPs) energy-neutral. However, advanced wastewater treatments and sewage sludge processing are still classified as highly energy-intensive. In this study, the energy self-sufficiency potential assessment of the WWTP located in Krosno (Poland) was evaluated. Moreover, the possible paths for improving the energy balance of the analyzed facility are presented in this paper. The performed evaluation indicated that in 2016–2019, the energy consumption at WWTP Krosno varied from 0.25 to 0.71 kWh/m3 of wastewater (average 0.51 kWh/m3), and the highest energy utilization values in each year were recorded around the summer season. An analysis of the data showed that as the pollutant load flowing into the WWTP increased, its energy utilization decreased. Such results indicate that the treatment cost per cubic meter decreases as the load increases due to the capital cost being the same. The estimated self-sufficiency of the facility in the years analyzed was 50.5%. The average energy recovery from 1 m3 of wastewater was 0.27 kWh/m3, and the average energy recovery from 1 m3 of biogas was 1.54 kWh/m3. Since the energy balance of this wastewater treatment plant, determined primarily by the continuously increasing cost of energy purchases, has to be improved, two courses of action were identified that will allow for increasing self-sufficiency. The co-digestion strategy was indicated as the easiest solution to implement, given the on-going anaerobic stabilization of sewage sludge at this WWTP. Moreover, the possible co-substrates that can be obtained from local suppliers were indicated. The second course of action, which requires a thorough economic analysis, is sludge pre-treatment, which might improve sewage sludge properties, resulting in a more favorable biogas yield. [ABSTRACT FROM AUTHOR]

The green transition is a challenge for the Polish economy and energy sector. In this paper, the expert method of analysis was applied and findings revealed that the challenges and prerequisites for an effective transformation of the power sector mainly include technical, technological and organizational issues of energy production and use. The provision of electricity at competitive prices and with a low carbon footprint, for individual consumers and industry, is a prerequisite for maintaining the well-being of the population and ensuring the competitiveness of domestically produced goods. The ambitious climate policy goals of the European Union require immediate action and call for radical changes in the Polish energy sector; in the coming years, it must drastically reduce the amount of energy produced from fossil fuels and replace it with so-called green energy from renewable sources. The main purpose of this article was to highlight the need to modify Poland's energy policy until 2040 in order to make it more consistent with the ambitious climate goals of the European Union. This article also shows that Poland's energy transition must include a shift from fossil fuels to renewables, while ensuring that energy security is stabilized by the current energy and generation resources. To this end, we discuss the issues of creating reserves in the national energy system for the entire period of Poland's energy transition. [ABSTRACT FROM AUTHOR]

The use of fossil fuel-based energy systems that provide heat and electricity to a building has adverse environmental impacts. These impacts can be mitigated, to a certain extent, through the incorporation of renewable energy sources (RES). The primary objective of this study was to conduct an environmental assessment of the performance of energy systems in existing public facilities located in Poland. Based on the findings, we proposed and implemented changes to these systems and validated the environmental impact of the RES systems used. SimaPro 8.1 software and the Ecoinvent 3.0 database were employed for the analysis, which entailed an environmental assessment of six public facilities located in Poland. The installation of RES resulted in an average 27% reduction in electricity consumption from the national electricity grid. This reduction was observed to be the least in the hospital and the most in the religious building. This was reflected in the environmental assessment of heating systems. The implementation of RES reduced the environmental impact of the religious building by an average of 20%. Concurrently, the CO2 emissions decreased by 35%, SO2 by 44%, and PM10 by 42%. Significant investments and the installation of advanced RES will not prevent the occurrence of unintentional environmental consequences unless the demand for electricity and thermal energy is reduced. The use of RES in the analyzed buildings and the associated avoided emissions do not entirely offset the negative emissions resulting from the utilization of other (conventional) energy sources in the analyzed energy systems of public buildings. Consequently, the analyzed facilities collectively exert a detrimental impact on the environment. [ABSTRACT FROM AUTHOR]

The growing demand for social and regulatory forest ecosystem services can significantly modify the availability and cost of biomass for energy purposes. This article presents a model for optimizing biomass supply chains using a linear programming framework integrated with a geographic information system (GIS). Based on a given type of biomass resource, its calorific value, price, distance from the power plant, and transportation costs, the model identifies the optimal source of biomass, allowing it to cover the demand for the required total energy value with the lowest possible costs. The case study includes the Połaniec power plant in southeastern Poland and potential sources of forest biomass and agricultural straw within 100 km of the plant. The impact of constraints on the availability and cost of biomass was analyzed in the following scenarios: (1) all forest and agriculture biomass is available, (2) forest area in Natura 2000 network is excluded, and (3) firewood and forests with dominated ecological and social function are excluded. Unit costs of biomass varied depending on biomass availability and energy demands. The lowest unit costs of biomass (3.19 EUR/MJ) were for energy demand at the level of 1 TJ yearly for all kinds of biomass and the highest (4.91 EUR/MJ) for ecological and social constraints and energy demand 4 TJ. As energy demand increased, unit costs increased, and the ability to meet this demand with just one type of biomass decreased. The energy biomass sector can utilize the model to benefit both biomass producers and their final buyers. [ABSTRACT FROM AUTHOR]

This article discusses the impact of rail market liberalization on the energy intensity of rail in relation to the export of goods, as well as the identification of multidimensional cause-and-effect relationships between rail energy intensity and the importing country's economic condition, transport performance, and transport distance. Three research questions were formulated: (1) Does the liberalization of the EU transport market and the implementation of a sustainable transport policy contribute to minimizing the energy consumption of rail transport? (2) Does the pursuit of economic growth allow for reducing the energy intensity of goods exported by rail transport in global trade? (3) Is there a justified paradigm for shifting long-distance freight transport from roads to rail? This study concerned 21 directions of the export of goods transported by rail from Poland to partner countries (worldwide) in 2010–2020. A panel model of rail transport energy consumption with random effects was constructed. As a result of rail market liberalization, the export of goods transported by rail across great distances occurs without harming economic development and leads to a reduction in energy intensity. On this basis, key strategies were formulated to promote rail transport in reducing the energy intensity of the transport sector. The authors filled the research gap by identifying the relationship between the energy intensity of exports of goods by rail transport in value terms, depending on the European transport market's liberalization process, the importing countries' economic situation, transport volume, and distance. The presented approach is innovative and can be adapted to the analysis of other modes of transport, including road transport, and other countries (and their structure and export directions). [ABSTRACT FROM AUTHOR]

This work presents an economic analysis of the use of electricity storage in PV installations, based on previously adopted assumptions, i.e., the type and location of the tested facility and comparative variants, divided into the share of the storage in the installation, and the billing system. The work takes into account the share of the energy shield and assumes a consumption limit of 2000 kWh. The cost of building the installation is based on July 2023 prices. The work assumes potential directions of changes in electricity prices, based on which the degree of investment profitability for a given price situation is determined. Depending on the adopted change in the direction of electricity prices, with a low price increase rate, for installations in the new billing system (net-billing), the optimal choice is an installation without energy storage with a power exceeding the actual energy demand. Assuming a high increase in electricity prices, the optimal choice is an installation with energy storage with an installation capacity exceeding the actual demand. For installations billed using the net-metering system, the optimal choice is an installation without storage with an appropriately selected installation power. This article shows how much you can gain after installing a PV installation and not only what costs must be incurred to complete the investment. Profit analysis will enable a more complete assessment of the profitability of investing in PV panels (with or without energy storage). It describes the verification of the profitability of a PV installation for a standard user depending on various types of settlements with the electricity supplier and the lack or installation of an energy-storage facility. [ABSTRACT FROM AUTHOR]

The aims of the article are to assess the legal conditions for improving energy efficiency in the energy-intensive food industry in Poland, including the rules for financing enterprises from public funds, and to assess the extent of state aid for these enterprises in their pursuit of energy saving goals. A critical analysis of the literature and of legal regulations on energy efficiency in EU and Polish law has been performed. The analysis of state aid is based on SUDOP data, and it takes into account the time span, the food industry structure, the enterprise size, the type and purpose of aid granted, and the degree of aid concentration. The conducted research showed that the largest share of state aid is received by energy-intensive industries, i.e., meat, fruit and vegetables, and dairy products (65.5%), and by large- and medium-sized enterprises (82.4%). This aid was allocated through various programmes and in various forms, the most important of which were subsidies. The aid focused on three objectives, i.e., promotion of energy from renewable sources, high-efficiency cogeneration, and measures supporting energy efficiency. The study shows the development of legislation on energy efficiency and possibilities for financing investments, both at the EU and national levels. Tightening climate policy will enhance the importance of energy efficiency in the food industry, which should be reflected in an increase in the relatively low current level of this aid (amounting to 0.04% of total state aid and 0.17% of aid for environmental protection and energy purposes). [ABSTRACT FROM AUTHOR]

This article addresses one of the contemporary economy's most challenging endeavors: the energy transition. Specifically, the aim of the study was to assess the effectiveness of Poland's energy transition process between 2004 and 2021. A comprehensive approach is employed to analyze Poland's energy transition process, focusing on the effectiveness of implementation through the Energy Transition Effectiveness Index. This methodology incorporates four dimensions, namely energy security, economic considerations, climate impact, and social aspects, each characterized by 22 sub-indices. The research methodology employs a two-tiered approach based on the multi-criteria decision making methodology. The EDAS method is utilized to determine the indices' values, while the CRITIC, equal weights, and statistical variance methods and Laplace's criterion are employed to ascertain sub-indices values and dimension weights, particularly useful for decision making under uncertainty. Moreover, the relationship between these indices, the Energy Transition Effectiveness Index, and Poland's Gross Domestic Product is explored. By evaluating Poland's energy transition effectiveness from 2004 to 2021 and comparing the results with other European Union countries, it becomes evident that the effectiveness varies over time. Despite encountering economic and social challenges during the energy sector's transformation, Poland exhibits positive progress in its energy transition efforts, outperforming certain European Union counterparts. However, there is a pressing need to intensify efforts to curtail emissions and enhance renewable energy utilization. The European Union's support and coordination are deemed crucial in facilitating these endeavors, alongside fostering the wider adoption of best practices among member states. The developed methodology stands as a valuable tool for ongoing evaluation of transformation processes across European Union nations. [ABSTRACT FROM AUTHOR]

Location is crucial when it comes to reducing the energy demand of buildings. Deterministic mathematical models of the energy demand of a single-family building were developed for the cities of Wrocław and Suwałki, representing the mild and severe climatic conditions of Poland, respectively, and compared with energy demand for Białystok, representing medium conditions. Models include the windows area, heat transfer coefficient, solar radiation transmittance of glazing, and orientation of windows. For medium conditions (Białystok), the energy demand is 18.3% higher than for mild conditions (Wrocław) and 7.3% lower than for severe climate conditions (Suwałki). Location does not influence the nature of the effect of the factors on energy demand, which increases with an increase in heat transfer coefficient and a decrease in window area, glazing solar radiation transmittance, and orientation change from north to south. The large impact of solar gains was proved. The optimisation procedure was performed and mathematical descriptions of recommended parameters were created to ensure the equivalent energy efficiency of windows for each orientation and location. For Bialystok, north-facing windows can have an area 1.32 times larger and south-facing windows 1.48 times smaller than east-facing windows to ensure a building's energy demand remains constant. [ABSTRACT FROM AUTHOR]

The development and advantages of renewable energy technologies mean that their areas of application are constantly expanding. The development of roads, transport systems, and electromobility also increases the demand for electricity. Roads occupy a certain area that could be used to install wind turbines or photovoltaic systems that could be used to power, among others, electric vehicle charging stations and road technical infrastructure facilities (travel service areas, tunnel lighting, road signs). There are many examples around the world where such solutions have been used. This critical review of existing solutions and the possibilities of their application in new places may contribute to further development and research in this area. Particular attention was paid to the possibility of using renewable energy systems in Poland, which can be successfully transferred to other countries with a similar climate. [ABSTRACT FROM AUTHOR]

The material developed focuses on the analysis of energy efficiency trends in Poland, utilising ODEX indicators for the sectors of industry, transport, households and in general, from 2011 to 2021. The objective of the study is to assess the progress made in energy efficiency and to forecast future trends in these sectors. The methods employed are based on statistical modelling of time series, taking into account sector-specific energy consumption dynamics. The following techniques were employed: linear regression, cluster analysis to identify patterns of change, statistical hypothesis testing for energy efficiency and simplified autoregressive models. The results demonstrated significant improvements in energy efficiency in the industrial sector, stability of the ODEX indicator in the transport sector and gradual improvements in households and overall. The prediction indicates an upward trend in the ODEX indicator in the short term, suggesting an increase in energy demand. However, it also predicts a decline in the long term, which may indicate the effectiveness of future energy efficiency strategies and investments. Consequently, the necessity for continued efforts to increase energy efficiency and further research into the factors influencing energy efficiency in different economic sectors is emphasised. [ABSTRACT FROM AUTHOR]

Improving the energy efficiency of buildings is one of the main challenges facing Europe in the context of climate neutrality policy. In this article, the authors decided to investigate the impact of thermal insulation of building envelopes and the type of ventilation on the energy efficiency of multi-family buildings located in different Polish cities. In accordance with EU directives, economic analyses of the costs incurred during the lifecycle and calculations of C O 2   emissions were carried out for the analyzed facilities. It was determined what measures need to be taken under Polish climatic conditions in order to meet the requirements for improving the energy efficiency of multi-family buildings. The multi-criteria analyses presented in this article provide a voice in the discussion of the issues related to the achievement of the energy performance of buildings with almost zero primary energy demand (nZEB). Based on the conclusions of the research conducted, it was possible to develop general recommendations for investors and designers of multi-family residential buildings characterized by energy efficiency and reduced environmental impact. [ABSTRACT FROM AUTHOR]

Shutdowns of photovoltaic installations are a problem that has been increasingly affecting private investors who have built home installations of several to a dozen kWp over the last few years. This problem, most often caused by outdated infrastructure, appears in many countries and impacts energy production. This work focuses on three aspects of the problem. The first one answers the question of how shutdowns of the photovoltaic installation affect production, and how significant the energy loss happens when the PV inverter is not working or is in the restart phase. The second aspect proposes an original, low-cost method that reduces the number of shutdowns. This method relates to the auto-consumption mechanism associated with domestic water heaters and the system for measuring voltage and energy consumption from the electrical network. The solution is based on constant monitoring of the network voltage and the switching of heaters based on a dedicated algorithm. Additionally, continuous analysis also allows for reporting observed irregularities to the electricity supplier. The third and final factor corresponds to the real impact of shutdowns on the long-term aspect of the investment and the extension of its payback period, and to what extent the proposed solution shortens this period. Through a detailed analysis on the issue of shutdowns, the proposed solution allows for a reduction in the number of shutdowns by over 40%. However, due to the fact that it discusses a specific case, this solution requires a calibration and adjustment process, which is discussed in the article. [ABSTRACT FROM AUTHOR]

The buildings sector is the single most important end-user of final energy in the European Union and a significant contributor to carbon and greenhouse gas emissions. This work focuses on a review of available data that are used to calculate the annual emissions from electricity generation in the European Union and quantify indirect emissions from the use of electricity in the buildings sector. Historical data since 1990 are used to derive simple empirical correlations for the time evolution of emissions factors related to electricity production in each Member State of the European Union. More recent trajectories using data from the last ten years are also presented. The derived correlations can be easily integrated in building stock modeling and national studies to facilitate forward-looking projections of emissions from electricity use in buildings. The EU-27 averages 0.2883 kgCO2-eq/kWhel, ranging from 0.0456 kgCO2-eq/kWhel in Sweden up to 1.0595 kgCO2-eq/kWhel in Poland. As a case study, the derived coefficients are then used to quantify the indirect emissions from the electricity consumption attributed to the building stock in each EU Member State. The calculated total EU-27 GHG indirect emissions attributed to electricity consumption amounted to 215 MtCO2-eq for residential buildings and 201 MtCO2-eq for non-residential buildings. In addition, the proposed correlations are used to demonstrate how they can be used for more realistic future projections of emissions towards the national targets in Greece and Poland. [ABSTRACT FROM AUTHOR]

For the European Union, the course of the Community's energy and climate policy as well as changes in the objectives and priorities of the Common Agricultural Policy, as reflected, among others, in rural development programs subject to ex ante, environmental and ex post evaluation, should be considered. Individual EU countries are still implementing their own programs focused on improving energy efficiency, energy modernisation and supporting renewable energy, and they also intervene in the energy market on an ad hoc basis, as was the case after the outbreak of the war in Ukraine. This article fits into such a broadly understood research perspective, and its primary goal is to identify the impact of the costs of energy consumption and the reimbursement of excise tax on motor fuels on the operational durability and financial sustainability of 103 farms belonging to the Polish FADN network, which in 2017–2021 implemented modernisation projects under the rural development program. Logistic and linear multivariate regression were used to estimate the strength, direction and significance of correlation relationships. It was found that relative energy costs were significantly negatively correlated with financial sustainability only in the linear model, while the impact of excise tax return was positive but not significant. Thus, an empirical proof of the advisability of a possible public intervention aimed at making farmers' access to energy cheaper was obtained. All public interventions in agricultural energy use should be subject to careful and systematic ex ante, mid-term and ex post assessments based on sound program theory. It is necessary to identify the cause-and-effect chains, in which the regression proposed in the article may be helpful. [ABSTRACT FROM AUTHOR]

The thermal interaction between cooling facilities and the ground is most often discussed in terms of the appropriate insulation of building partitions. Unfortunately, there is little information about the potential of using ground thermal accumulation to support the shaping of the microclimate in cooling facilities by embedding them in the ground. This problem is particularly important in the context of striving to reduce the energy demand of buildings. The article discusses a new scientific problem related to the effect of vegetable cold storage floors being recessed into the ground on the surrounding land's impact range and on its energy management. Validation of the numerical model was performed based on actual year-round field surveys. These surveys were conducted in a free-standing vegetable cold storage facility located in southern Poland. The results of the study allowed us to determine the contribution of the land to the energy balance of the cold storage. A floor recessed into the ground doubled the ground's contribution to the energy balance. The most important research results showed that the range of thermal impact on the surrounding ground also increased by 2.0 m more than that of a building with the floor located at ground level. An evaluation of the heat flow between the cold storage and the ground in the cases analyzed was also carried out. The analysis of the ground heat exchange balance on an annual basis showed high energy gains of 2055 kWh. The total energy demand for cooling was 1723 kWh, while it was 1204 kWh for heating. The results of the analysis of the heat exchange intensity between the indoor air and the ground showed that the ground contribution accounted for 16.6% of the total energy balance of the cold storage. The highest energy gains from the ground were found in October and amounted to 478 kWh. Due to the summer shutdown, there was an intense heat flow to the ground in July, which amounted to 588 kWh. [ABSTRACT FROM AUTHOR]