Search

Open source software has been widely used in various industries due to its openness and flexibility, but it also brings potential security problems. Therefore, security analysis is required before using open source software. The current mainstream open source software vulnerability analysis technology is based on source code, and there are problems such as false positives, false negatives and restatements. In order to solve the problems, based on the further study of behavior feature extraction and vulnerability detection technology, a method of using dynamic behavior features to detect open source software vulnerabilities is proposed. Firstly, the relationship between open source software vulnerability and API call sequence is studied. Then, the behavioral risk vulnerability database of open source software is proposed as a support for vulnerability detection. In addition, the CNN-IndRNN classification model is constructed by improving the Independently Recurrent Neural Net-work (IndRNN) algorithm and applies to open source software security vulnerability detection. The experimental results verify the effectiveness of the proposed open source software security vulnerability detection method based on dynamic behavior features. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

Background and objectives: ECG signal is relatively weak and vulnerable to various noise interferences, such as electromyography. There will be robustness problems when detecting the instantaneous heart rate independently. In some cases, multiple human physiologic parameters are monitored to help in heart rate detection. Methods: In this paper, an algorithm that marks the R-wave peaks with the help of simultaneously recorded continuous blood pressure is proposed and tested on two databases. One database, called the challenge database, is provided by the PhysioNet/Computing in Cardiology Challenge 2014, and the other is the MGH/MF waveform database. Results: The final scores of the proposed algorithm are 97.3% for the challenge database and 96.6% for the MGH/MF waveform database. Conclusions: The experimental results show that this algorithm has high detection accuracy and a relatively strong robustness. [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal "Mathematical Methods in the Applied Sciences" focused on William K. Clifford's geometric algebra (GA) and its applications in software engineering, computer graphics, computer vision, and general computer science fields. The editorial highlights the 7th international workshop ENGAGE 2022, which provided a multi-disciplinary approach to GA and resulted in the acceptance of seven papers for this special issue. The editorial also mentions previous conferences and workshops that have emphasized the benefits of GA in computer graphics and vision problems. The special issue includes contributions on various applications of GA, such as protein coordinate prediction, calculation of exponential and elementary functions, octonion Fourier transform, projective duality, and Clifford ratios. The workshop organizers express gratitude to the conference organizers, committee members, reviewers, contributors, and the journal publisher for their support. [Extracted from the article]

Sentiment analysis is widely studied to extract opinions from user generated content (UGC), and various methods have been proposed in recent literature. However, these methods are likely to introduce sentiment bias, and the classification results tend to be positive or negative, especially for the lexicon-based sentiment classification methods. The existence of sentiment bias leads to poor performance of sentiment analysis. To deal with this problem, we propose a novel sentiment bias processing strategy which can be applied to the lexicon-based sentiment analysis method. Weight and threshold parameters learned from a small training set are introduced into the lexicon-based sentiment scoring formula, and then the formula is used to classify the reviews. In this paper, a completed sentiment classification framework is proposed. SentiWordNet (SWN) is used as the experimental sentiment lexicon, and review data of four products collected from Amazon are used as the experimental datasets. Experimental results show that the bias processing strategy reduces polarity bias rate (PBR) and improves performance of the lexicon-based sentiment analysis method. [ABSTRACT FROM AUTHOR]

Data mining and search-based algorithms have been applied to various problems due to their power and performance. There have been several studies on the use of these algorithms for refactoring. In this paper, we show how search based algorithms can be used for sequence diagram refactoring. We also show how a hybridized algorithm of Kmeans and Simulated Annealing (SA) algorithms can aid each other in solving sequence diagram refactoring. Results show that search based algorithms can be used successfully in refactoring sequence diagram on small and large case studies. In addition, the hybridized algorithm obtains good results using selected quality metrics. Detailed insights on the experiments on sequence diagram refactoring reveal that the limitations of SA can be addressed by hybridizing the Kmeans algorithm to the SA algorithm. [ABSTRACT FROM AUTHOR]

Feature selection and classification are the main topics in microarray data analysis. Although many feature selection methods have been proposed and developed in this field, SVM-RFE (Support Vector Machine based on Recursive Feature Elimination) is proved as one of the best feature selection methods, which ranks the features (genes) by training support vector machine classification model and selects key genes combining with recursive feature elimination strategy. The principal drawback of SVM-RFE is the huge time consumption. To overcome this limitation, we introduce a more efficient implementation of linear support vector machines and improve the recursive feature elimination strategy and then combine them together to select informative genes. Besides, we propose a simple resampling method to preprocess the datasets, which makes the information distribution of different kinds of samples balanced and the classification results more credible. Moreover, the applicability of four common classifiers is also studied in this paper. Extensive experiments are conducted on six most frequently used microarray datasets in this field, and the results show that the proposed methods have not only reduced the time consumption greatly but also obtained comparable classification performance. [ABSTRACT FROM AUTHOR]

In this paper we compare systematically the most promising neuroevolutionary methods and two new original methods on the double-pole balancing problem with respect to: the ability to discover solutions that are robust to variations of the environment, the speed with which such solutions are found, and the ability to scale-up to more complex versions of the problem. The results indicate that the two original methods introduced in this paper and the Exponential Natural Evolutionary Strategy method largely outperform the other methods with respect to all considered criteria. The results collected in different experimental conditions also reveal the importance of regulating the selective pressure and the importance of exposing evolving agents to variable environmental conditions. The data collected and the results of the comparisons are used to identify the most effective methods and the most promising research directions. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

This paper studies the Retailer Stackelberg game in a supply chain consisting of two manufacturers and one retailer where they compete simultaneously under three factors including price, service and simple price discount contract. It is assumed that the second manufacturer provides service directly to his customers, and the retailer provides service for the first product’s customers, while the retailer buys the first product under price discount from the first manufacturer. The analysis of the optimal equilibrium solutions and the results of the numerical examples show that if a manufacturer chooses the appropriate range of discount rate, he will gain more profit than when there is no discount given to the retailer. This situation can be considered as an effective tool for the coordination of the first manufacturer and the retailer to offer discount by manufacturer and to provide the service by the retailer. We obtain equilibrium solution of Retailer Stackelberg game and analyze the numerical examples under two cases: a) the manufacturers sell their products to the retailer without price discount contract. b) The first manufacturer sells his products to the retailer with the simple price discount contract. The preliminary results show that the service and the price discount contract can improve the performance of supply chain. [ABSTRACT FROM AUTHOR]

The Grid scheduler, schedules user jobs on the best available resource in terms of resource characteristics by optimizing job execution time. Resource failure in Grid is no longer an exception but a regular occurring event as resources are increasingly being used by the scientific community to solve computationally intensive problems which typically run for days or even months. It is therefore absolutely essential that these long-running applications are able to tolerate failures and avoid re-computations from scratch after resource failure has occurred, to satisfy the user’s Quality of Service (QoS) requirement. Job Scheduling with Fault Tolerance in Grid Computing using Ant Colony Optimization is proposed to ensure that jobs are executed successfully even when resource failure has occurred. The technique employed in this paper, is the use of resource failure rate, as well as checkpoint-based roll back recovery strategy. Check-pointing aims at reducing the amount of work that is lost upon failure of the system by immediately saving the state of the system. A comparison of the proposed approach with an existing Ant Colony Optimization (ACO) algorithm is discussed. The experimental results of the implemented Fault Tolerance scheduling algorithm show that there is an improvement in the user’s QoS requirement over the existing ACO algorithm, which has no fault tolerance integrated in it. The performance evaluation of the two algorithms was measured in terms of the three main scheduling performance metrics: makespan, throughput and average turnaround time. [ABSTRACT FROM AUTHOR]

Depth image-based rendering (DIBR), which is used to render virtual views with a color image and the corresponding depth map, is one of the key techniques in the 2D to 3D conversion process. Due to the absence of knowledge about the 3D structure of a scene and its corresponding texture, DIBR in the 2D to 3D conversion process, inevitably leads to holes in the resulting 3D image as a result of newly-exposed areas. In this paper, we proposed a structure-aided depth map preprocessing framework in the transformed domain, which is inspired by recently proposed domain transform for its low complexity and high efficiency. Firstly, our framework integrates hybrid constraints including scene structure, edge consistency and visual saliency information in the transformed domain to improve the performance of depth map preprocess in an implicit way. Then, adaptive smooth localization is cooperated and realized in the proposed framework to further reduce over-smoothness and enhance optimization in the non-hole regions. Different from the other similar methods, the proposed method can simultaneously achieve the effects of hole filling, edge correction and local smoothing for typical depth maps in a united framework. Thanks to these advantages, it can yield visually satisfactory results with less computational complexity for high quality 2D to 3D conversion. Numerical experimental results demonstrate the excellent performances of the proposed method. [ABSTRACT FROM AUTHOR]

A Mesh topology is one of the most promising architecture due to its regular and simple structure for on-chip communication. Performance of mesh topology degraded greatly by increasing the network size due to small bisection width and large network diameter. In order to overcome this limitation, many researchers presented modified Mesh design by adding some extra links to improve its performance in terms of network latency and power consumption. The Cross-By-Pass-Mesh was presented by us as an improved version of Mesh topology by intelligent addition of extra links. This paper presents an efficient topology named Cross-By-Pass-Torus for further increase in the performance of the Cross-By-Pass-Mesh topology. The proposed design merges the best features of the Cross-By-Pass-Mesh and Torus, to reduce the network diameter, minimize the average number of hops between nodes, increase the bisection width and to enhance the overall performance of the network. In this paper, the architectural design of the topology is presented and analyzed against similar kind of 2D topologies in terms of average latency, throughput and power consumption. In order to certify the actual behavior of proposed topology, the synthetic traffic trace and five different real embedded application workloads are applied to the proposed as well as other competitor network topologies. The simulation results indicate that Cross-By-Pass-Torus is an efficient candidate among its predecessor’s and competitor topologies due to its less average latency and increased throughput at a slight cost in network power and energy for on-chip communication. [ABSTRACT FROM AUTHOR]

Behaviour models are the most commonly used input for predicting the reliability of a software system at the early design stage. A component behaviour model reveals the structure and behaviour of the component during the execution of system-level functionalities. There are various challenges related to component reliability prediction at the early design stage based on behaviour models. For example, most of the current reliability techniques do not provide fine-grained sequential behaviour models of individual components and fail to consider the loop entry and exit points in the reliability computation. Moreover, some of the current techniques do not tackle the problem of operational data unavailability and the lack of analysis results that can be valuable for software architects at the early design stage. This paper proposes a reliability prediction technique that, pragmatically, synthesizes system behaviour in the form of a state machine, given a set of scenarios and corresponding constraints as input. The state machine is utilized as a base for generating the component-relevant operational data. The state machine is also used as a source for identifying the nodes and edges of a component probabilistic dependency graph (CPDG). Based on the CPDG, a stack-based algorithm is used to compute the reliability. The proposed technique is evaluated by a comparison with existing techniques and the application of sensitivity analysis to a robotic wheelchair system as a case study. The results indicate that the proposed technique is more relevant at the early design stage compared to existing works, and can provide a more realistic and meaningful prediction. [ABSTRACT FROM AUTHOR]

Information carried by an image can be distorted due to different image processing steps introduced by different electronic means of storage and communication. Therefore, development of algorithms which can automatically assess a quality of the image in a way that is consistent with human evaluation is important. In this paper, an approach to image quality assessment (IQA) is proposed in which the quality of a given image is evaluated jointly by several IQA approaches. At first, in order to obtain such joint models, an optimisation problem of IQA measures aggregation is defined, where a weighted sum of their outputs, i.e., objective scores, is used as the aggregation operator. Then, the weight of each measure is considered as a decision variable in a problem of minimisation of root mean square error between obtained objective scores and subjective scores. Subjective scores reflect ground-truth and involve evaluation of images by human observers. The optimisation problem is solved using a genetic algorithm, which also selects suitable measures used in aggregation. Obtained multimeasures are evaluated on four largest widely used image benchmarks and compared against state-of-the-art full-reference IQA approaches. Results of comparison reveal that the proposed approach outperforms other competing measures. [ABSTRACT FROM AUTHOR]

How can we extract hidden relations from a tensor and a matrix data simultaneously in a fast, accurate, and scalable way? Coupled matrix-tensor factorization (CMTF) is an important tool for this purpose. Designing an accurate and efficient CMTF method has become more crucial as the size and dimension of real-world data are growing explosively. However, existing methods for CMTF suffer from lack of accuracy, slow running time, and limited scalability. In this paper, we propose S3CMTF, a fast, accurate, and scalable CMTF method. In contrast to previous methods which do not handle large sparse tensors and are not parallelizable, S3CMTF provides parallel sparse CMTF by carefully deriving gradient update rules. S3CMTF asynchronously updates partial gradients without expensive locking. We show that our method is guaranteed to converge to a quality solution theoretically and empirically. S3CMTF further boosts the performance by carefully storing intermediate computation and reusing them. We theoretically and empirically show that S3CMTF is the fastest, outperforming existing methods. Experimental results show that S3CMTF is up to 930× faster than existing methods while providing the best accuracy. S3CMTF shows linear scalability on the number of data entries and the number of cores. In addition, we apply S3CMTF to Yelp rating tensor data coupled with 3 additional matrices to discover interesting patterns. [ABSTRACT FROM AUTHOR]

Background: Regular expression matching (REM) is widely employed as the major tool for deep packet inspection (DPI) applications. For automatic processing, the regular expression patterns need to be converted to a deterministic finite automata (DFA). However, with the ever-increasing scale and complexity of pattern sets, state explosion problem has brought a great challenge to the DFA based regular expression matching. Rule grouping is a direct method to solve the state explosion problem. The original rule set is divided into multiple disjoint groups, and each group is compiled to a separate DFA, thus to significantly restrain the severe state explosion problem when compiling all the rules to a single DFA. Objective: For practical implementation, the total number of DFA states should be as few as possible, thus the data structures of these DFAs can be deployed on fast on-chip memories for rapid access. In addition, to support fast pattern update in some applications, the time cost for grouping should be as small as possible. In this study, we aimed to propose an efficient grouping method, which generates as few states as possible with as little time overhead as possible. Methods: When compiling multiple patterns into a single DFA, the number of DFA states is usually greater than the total number of states when compiling each pattern to a separate DFA. This is mainly caused by the semantic overlaps among different rules. By quantifying the interaction values for each pair of rules, the rule grouping problem can be reduced to the maximum k-cut graph partitioning problem. Then, we propose a heuristic algorithm called the one-step greedy (OSG) algorithm to solve this NP-hard problem. What’s more, a subroutine named the heuristic initialization (HI) algorithm is devised to further optimize the grouping algorithms. Results: We employed three practical rule sets for the experimental evaluation. Results show that the OSG algorithm outperforms the state-of-the-art grouping solutions regarding both the total number of DFA states and time cost for grouping. The HI subroutine also demonstrates its significant optimization effect on the grouping algorithms. Conclusions: The DFA state explosion problem has became the most challenging issue in the regular expression matching applications. Rule grouping is a practical direction by dividing the original rule sets into multiple disjoint groups. In this paper, we investigate the current grouping solutions, and propose a compact and efficient grouping algorithm. Experiments conducted on practical rule sets demonstrate the superiority of our proposal. [ABSTRACT FROM AUTHOR]

Frequently, port scans are early indicators of more serious attacks. Unfortunately, the detection of slow port scans in company networks is challenging due to the massive amount of network data. This paper proposes an innovative approach for preprocessing flow-based data which is specifically tailored to the detection of slow port scans. The preprocessing chain generates new objects based on flow-based data aggregated over time windows while taking domain knowledge as well as additional knowledge about the network structure into account. The computed objects are used as input for the further analysis. Based on these objects, we propose two different approaches for detection of slow port scans. One approach is unsupervised and uses sequential hypothesis testing whereas the other approach is supervised and uses classification algorithms. We compare both approaches with existing port scan detection algorithms on the flow-based CIDDS-001 data set. Experiments indicate that the proposed approaches achieve better detection rates and exhibit less false alarms than similar algorithms. [ABSTRACT FROM AUTHOR]

Microprocessors in safety-critical system are extremely vulnerable to hacker attacks and circuit crosstalk, as they can modify binaries and lead programs to run along the wrong control flow paths. It is a significant challenge to design a run-time validation method with few hardware modification. In this paper, an efficient control flow validation method named DCM (Dual-Processor Control Flow Validation Method) is proposed basing on dual-processor architecture. Since a burst of memory-access-intensive instructions could block pipeline and cause lots of waiting clocks, the DCM assigns the idle pipeline cycles of the blocked processor to the other processor to validate control flow at run time. An extra lightweight monitor unit in each processor is needed and a special dual-processor communication protocol is also designed to schedule the redundant computing capacity between two processors to do validation tasks better. To further improve the efficiency, we also design a software-based self-validation algorithm to help reduce validation times. The combination of both hardware method and software method can speed up the validation procedure and protect the control flow paths with different emphasis. The cycle-accurate simulator GEM5 is used to simulate two ARMv7-A processors with out-of-order pipeline. Experiment shows the performance overhead of DCM is less than 22% on average across the SPEC 2006 benchmarks. [ABSTRACT FROM AUTHOR]

Non-invasive fetal electrocardiography (ECG) is based on the acquisition of signals from abdominal surface electrodes. The composite abdominal signal consists of the maternal electrocardiogram along with the fetal electrocardiogram and other electrical interferences. These recordings allow for the acquisition of valuable and reliable information that helps ensure fetal well-being during pregnancy. This paper introduces a procedure for fetal heart rate extraction from a single-channel abdominal ECG signal. The procedure is composed of three main stages: a method based on wavelet for signal denoising, a new clustering-based methodology for detecting fetal QRS complexes, and a final stage to correct false positives and false negatives. The novelty of the procedure thus relies on using clustering techniques to classify singularities from the abdominal ECG into three types: maternal QRS complexes, fetal QRS complexes, and noise. The amplitude and time distance of all the local maxima followed by a local minimum were selected as features for the clustering classification. A wide set of real abdominal ECG recordings from two different databases, providing a large range of different characteristics, was used to illustrate the efficiency of the proposed method. The accuracy achieved shows that the proposed technique exhibits a competitve performance when compared to other recent works in the literature and a better performance over threshold-based techniques. [ABSTRACT FROM AUTHOR]

In this paper, we propose a sentiment-based approach to investigate the temporal and spatiotemporal effects on tourists’ emotions when visiting a city’s tourist destinations. Our approach consists of four steps: data collection and preprocessing from social media; visitor origin identification; visit sentiment identification; and temporal and spatiotemporal analysis. The temporal and spatiotemporal dimensions include day of the year, season of the year, day of the week, location sentiment progression, enjoyment measure, and multi-location sentiment progression. We apply this approach to the city of Chicago using over eight million tweets. Results show that seasonal weather, as well as special days and activities like concerts, impact tourists’ emotions. In addition, our analysis suggests that tourists experience greater levels of enjoyment in places such as observatories rather than zoos. Finally, we find that local and international visitors tend to convey negative sentiment when visiting more than one attraction in a day whereas the opposite holds for out of state visitors. [ABSTRACT FROM AUTHOR]

The appreciation for the need to record electroencephalographic (EEG) signals from humans while walking has been steadily growing in recent years, particularly in relation to understanding gait disturbances. Movement artefacts (MA) in EEG signals originate from mechanical forces applied to the scalp electrodes, inducing small electrode movements relative to the scalp which, in turn, cause the recorded voltage to change irrespectively of cortical activity. These mechanical forces, and thus MA, may have various sources (e.g., ground reaction forces, head movements, etc.) that are inherent to daily activities, notably walking. In this paper we introduce a systematic, integrated methodology for removing MA from EEG signals recorded during treadmill (TM) and over-ground (OG) walking, as well as quantify the prevalence of MA in different locomotion settings. In our experiments, participants performed walking trials at various speeds both OG and on a TM while wearing a 32-channel EEG cap and a 3-axis accelerometer, placed on the forehead. Data preprocessing included separating the EEG signals into statistically independent additive components using independent component analysis (ICA). We observed an increase in electro-physiological signals (e.g., neck EMG activations for stabilizing the head during heel-strikes) as the walking speed increased. These artefact independent-components (ICs), while not originating from electrode movement, still exhibit a similar spectral pattern to the MA ICs–a peak at the stepping frequency. MA was identified and quantified in each component using a novel method that utilizes the participant’s stepping frequency, derived from a forehead-mounted accelerometer. We then benchmarked the EEG data by applying newly established metrics to quantify the success of our method in cleaning the data. The results indicate that our approach can be successfully applied to EEG data recorded during TM and OG walking, and is offered as a unified methodology for MA removal from EEG collected during gait trials. [ABSTRACT FROM AUTHOR]

Serious game development for rehabilitation therapy is becoming increasingly popular because of the motivational advantages that these types of applications provide. Consequently, the need for a common process framework for this category of software development has become increasingly evident. The goal is to guarantee that products are developed and validated by following a coherent and systematic method that leads to high-quality serious games. This paper introduces a new process framework for the development of serious games for motor rehabilitation therapy. We introduce the new model and demonstrate its application for the development of a serious game for the improvement of the balance and postural control of adults with cerebral palsy. The development of this application has been facilitated by two technological transfer contracts and is being exploited by two different organizations. According to clinical measurements, patients using the application improved from high fall risk to moderate fall risk. We believe that our development strategy can be useful not only for motor rehabilitation therapy, but also for the development of serious games in many other rehabilitation areas. [ABSTRACT FROM AUTHOR]

We give an overview of the basic principles of approximate Bayesian computation (ABC), a class of stochastic methods that enable flexible and likelihood-free model comparison and parameter estimation. Our new open-source software called ABrox is used to illustrate ABC for model comparison on two prominent statistical tests, the two-sample t-test and the Levene-Test. We further highlight the flexibility of ABC compared to classical Bayesian hypothesis testing by computing an approximate Bayes factor for two multinomial processing tree models. Last but not least, throughout the paper, we introduce ABrox using the accompanied graphical user interface. [ABSTRACT FROM AUTHOR]

Security is a crucial requirement in the envisioned applications of the Internet of Things (IoT), where most of the underlying computing platforms are embedded systems with reduced computing capabilities and energy constraints. In this paper we present the design and evaluation of a scalable low-area FPGA hardware architecture that serves as a building block to accelerate the costly operations of exponentiation and multiplication in , commonly required in security protocols relying on public key encryption, such as in key agreement, authentication and digital signature. The proposed design can process operands of different size using the same datapath, which exhibits a significant reduction in area without loss of efficiency if compared to representative state of the art designs. For example, our design uses 96% less standard logic than a similar design optimized for performance, and 46% less resources than other design optimized for area. Even using fewer area resources, our design still performs better than its embedded software counterparts (190x and 697x). [ABSTRACT FROM AUTHOR]

In this paper, we propose a face recognition algorithm based on a combination of vector quantization (VQ) and Markov stationary features (MSF). The VQ algorithm has been shown to be an effective method for generating features; it extracts a codevector histogram as a facial feature representation for face recognition. Still, the VQ histogram features are unable to convey spatial structural information, which to some extent limits their usefulness in discrimination. To alleviate this limitation of VQ histograms, we utilize Markov stationary features (MSF) to extend the VQ histogram-based features so as to add spatial structural information. We demonstrate the effectiveness of our proposed algorithm by achieving recognition results superior to those of several state-of-the-art methods on publicly available face databases. [ABSTRACT FROM AUTHOR]

Software test suites based on the concept of interaction testing are very useful for testing software components in an economical way. Test suites of this kind may be created using mathematical objects called covering arrays. A covering array, denoted by CA(N; t, k, v), is an N × k array over with the property that every N × t sub-array covers all t-tuples of at least once. Covering arrays can be used to test systems in which failures occur as a result of interactions among components or subsystems. They are often used in areas such as hardware Trojan detection, software testing, and network design. Because system testing is expensive, it is critical to reduce the amount of testing required. This paper addresses the Optimal Shortening of Covering ARrays (OSCAR) problem, an optimization problem whose objective is to construct, from an existing covering array matrix of uniform level, an array with dimensions of (N − δ) × (k − Δ) such that the number of missing t-tuples is minimized. Two applications of the OSCAR problem are (a) to produce smaller covering arrays from larger ones and (b) to obtain quasi-covering arrays (covering arrays in which the number of missing t-tuples is small) to be used as input to a meta-heuristic algorithm that produces covering arrays. In addition, it is proven that the OSCAR problem is NP-complete, and twelve different algorithms are proposed to solve it. An experiment was performed on 62 problem instances, and the results demonstrate the effectiveness of solving the OSCAR problem to facilitate the construction of new covering arrays. [ABSTRACT FROM AUTHOR]

The structure and appearance of the blood vessel network in retinal fundus images is an essential part of diagnosing various problems associated with the eyes, such as diabetes and hypertension. In this paper, an automatic retinal vessel segmentation method utilizing matched filter techniques coupled with an AdaBoost classifier is proposed. The fundus image is enhanced using morphological operations, the contrast is increased using contrast limited adaptive histogram equalization (CLAHE) method and the inhomogeneity is corrected using Retinex approach. Then, the blood vessels are enhanced using a combination of B-COSFIRE and Frangi matched filters. From this preprocessed image, different statistical features are computed on a pixel-wise basis and used in an AdaBoost classifier to extract the blood vessel network inside the image. Finally, the segmented images are postprocessed to remove the misclassified pixels and regions. The proposed method was validated using publicly accessible Digital Retinal Images for Vessel Extraction (DRIVE), Structured Analysis of the Retina (STARE) and Child Heart and Health Study in England (CHASE_DB1) datasets commonly used for determining the accuracy of retinal vessel segmentation methods. The accuracy of the proposed segmentation method was comparable to other state of the art methods while being very close to the manual segmentation provided by the second human observer with an average accuracy of 0.972, 0.951 and 0.948 in DRIVE, STARE and CHASE_DB1 datasets, respectively. [ABSTRACT FROM AUTHOR]

Nowadays, a typical processor may have multiple processing cores on a single chip. Furthermore, a special purpose processing unit called Graphic Processing Unit (GPU), originally designed for 2D/3D games, is now available for general purpose use in computers and mobile devices. However, the traditional programming languages which were designed to work with machines having single core CPUs, cannot utilize the parallelism available on multi-core processors efficiently. Therefore, to exploit the extraordinary processing power of multi-core processors, researchers are working on new tools and techniques to facilitate parallel programming. To this end, languages like CUDA and OpenCL have been introduced, which can be used to write code with parallelism. The main shortcoming of these languages is that programmer needs to specify all the complex details manually in order to parallelize the code across multiple cores. Therefore, the code written in these languages is difficult to understand, debug and maintain. Furthermore, to parallelize legacy code can require rewriting a significant portion of code in CUDA or OpenCL, which can consume significant time and resources. Thus, the amount of parallelism achieved is proportional to the skills of the programmer and the time spent in code optimizations. This paper proposes a new open source compiler, Rubus, to achieve seamless parallelism. The Rubus compiler relieves the programmer from manually specifying the low-level details. It analyses and transforms a sequential program into a parallel program automatically, without any user intervention. This achieves massive speedup and better utilization of the underlying hardware without a programmer’s expertise in parallel programming. For five different benchmarks, on average a speedup of 34.54 times has been achieved by Rubus as compared to Java on a basic GPU having only 96 cores. Whereas, for a matrix multiplication benchmark the average execution speedup of 84 times has been achieved by Rubus on the same GPU. Moreover, Rubus achieves this performance without drastically increasing the memory footprint of a program. [ABSTRACT FROM AUTHOR]

Automatic extraction of protein-protein interaction (PPI) pairs from biomedical literature is a widely examined task in biological information extraction. Currently, many kernel based approaches such as linear kernel, tree kernel, graph kernel and combination of multiple kernels has achieved promising results in PPI task. However, most of these kernel methods fail to capture the semantic relation information between two entities. In this paper, we present a special type of tree kernel for PPI extraction which exploits both syntactic (structural) and semantic vectors information known as Distributed Smoothed Tree kernel (DSTK). DSTK comprises of distributed trees with syntactic information along with distributional semantic vectors representing semantic information of the sentences or phrases. To generate robust machine learning model composition of feature based kernel and DSTK were combined using ensemble support vector machine (SVM). Five different corpora (AIMed, BioInfer, HPRD50, IEPA, and LLL) were used for evaluating the performance of our system. Experimental results show that our system achieves better f-score with five different corpora compared to other state-of-the-art systems. [ABSTRACT FROM AUTHOR]

High-throughput gene expression data are often obtained from pure or complex (heterogeneous) biological samples. In the latter case, data obtained are a mixture of different cell types and the heterogeneity imposes some difficulties in the analysis of such data. In order to make conclusions on gene expresssion data obtained from heterogeneous samples, methods such as microdissection and flow cytometry have been employed to physically separate the constituting cell types. However, these manual approaches are time consuming when measuring the responses of multiple cell types simultaneously. In addition, exposed samples, on many occasions, end up being contaminated with external perturbations and this may result in an altered yield of molecular content. In this paper, we model the heterogeneous gene expression data using a Bayesian framework, treating the cell type proportions and the cell-type specific expressions as the parameters of the model. Specifically, we present a novel sequential Monte Carlo (SMC) sampler for estimating the model parameters by approximating their posterior distributions with a set of weighted samples. The SMC framework is a robust and efficient approach where we construct a sequence of artificial target (posterior) distributions on spaces of increasing dimensions which admit the distributions of interest as marginals. The proposed algorithm is evaluated on simulated datasets and publicly available real datasets, including Affymetrix oligonucleotide arrays and national center for biotechnology information (NCBI) gene expression omnibus (GEO), with varying number of cell types. The results obtained on all datasets show a superior performance with an improved accuracy in the estimation of cell type proportions and the cell-type specific expressions, and in addition, more accurate identification of differentially expressed genes when compared to other widely known methods for blind decomposition of heterogeneous gene expression data such as Dsection and the nonnegative matrix factorization (NMF) algorithms. MATLAB implementation of the proposed SMC algorithm is available to download at . [ABSTRACT FROM AUTHOR]

The social functions of urbanized areas are highly dependent on and supported by the convenient access to public transportation systems, particularly for the less privileged populations who have restrained auto ownership. To accurately evaluate the public transit accessibility, it is critical to capture the spatiotemporal variation of transit services. This can be achieved by measuring the shortest paths or minimum travel time between origin-destination (OD) pairs at each time-of-day (e.g. every minute). In recent years, General Transit Feed Specification (GTFS) data has been gaining popularity for between-station travel time estimation due to its interoperability in spatiotemporal analytics. Many software packages, such as ArcGIS, have developed toolbox to enable the travel time estimation with GTFS. They perform reasonably well in calculating travel time between OD pairs for a specific time-of-day (e.g. 8:00 AM), yet can become computational inefficient and unpractical with the increase of data dimensions (e.g. all times-of-day and large network). In this paper, we introduce a new algorithm that is computationally elegant and mathematically efficient to address this issue. An open-source toolbox written in C++ is developed to implement the algorithm. We implemented the algorithm on City of St. George’s transit network to showcase the accessibility analysis enabled by the toolbox. The experimental evidence shows significant reduction on computational time. The proposed algorithm and toolbox presented is easily transferable to other transit networks to allow transit agencies and researchers perform high resolution transit performance analysis. [ABSTRACT FROM AUTHOR]

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems. [ABSTRACT FROM AUTHOR]

In this paper, based on our previous multi-pattern uniform resource locator (URL) binary-matching algorithm called HEM, we propose an improved multi-pattern matching algorithm called MH that is based on hash tables and binary tables. The MH algorithm can be applied to the fields of network security, data analysis, load balancing, cloud robotic communications, and so on—all of which require string matching from a fixed starting position. Our approach effectively solves the performance problems of the classical multi-pattern matching algorithms. This paper explores ways to improve string matching performance under the HTTP protocol by using a hash method combined with a binary method that transforms the symbol-space matching problem into a digital-space numerical-size comparison and hashing problem. The MH approach has a fast matching speed, requires little memory, performs better than both the classical algorithms and HEM for matching fields in an HTTP stream, and it has great promise for use in real-world applications. [ABSTRACT FROM AUTHOR]

As the quality of crucial entities can directly affect that of software, their identification and protection become an important premise for effective software development, management, maintenance and testing, which thus contribute to improving the software quality and its attack-defending ability. Most analysis and evaluation on important entities like codes-based static structure analysis are on the destruction of the actual software running. In this paper, from the perspective of software execution process, we proposed an approach to mine dynamic noteworthy functions (DNFM)in software execution sequences. First, according to software decompiling and tracking stack changes, the execution traces composed of a series of function addresses were acquired. Then these traces were modeled as execution sequences and then simplified so as to get simplified sequences (SFS), followed by the extraction of patterns through pattern extraction (PE) algorithm from SFS. After that, evaluating indicators inner-importance and inter-importance were designed to measure the noteworthiness of functions in DNFM algorithm. Finally, these functions were sorted by their noteworthiness. Comparison and contrast were conducted on the experiment results from two traditional complex network-based node mining methods, namely PageRank and DegreeRank. The results show that the DNFM method can mine noteworthy functions in software effectively and precisely. [ABSTRACT FROM AUTHOR]

Acquiring reliable data on large felid populations is crucial for effective conservation and management. However, large felids, typically solitary, elusive and nocturnal, are difficult to survey. Tagging and following individuals with VHF or GPS technology is the standard approach, but costs are high and these methodologies can compromise animal welfare. Such limitations can restrict the use of these techniques at population or landscape levels. In this paper we describe a robust technique to identify and sex individual pumas from footprints. We used a standardized image collection protocol to collect a reference database of 535 footprints from 35 captive pumas over 10 facilities; 19 females (300 footprints) and 16 males (235 footprints), ranging in age from 1–20 yrs. Images were processed in JMP data visualization software, generating one hundred and twenty three measurements from each footprint. Data were analyzed using a customized model based on a pairwise trail comparison using robust cross-validated discriminant analysis with a Ward’s clustering method. Classification accuracy was consistently > 90% for individuals, and for the correct classification of footprints within trails, and > 99% for sex classification. The technique has the potential to greatly augment the methods available for studying puma and other elusive felids, and is amenable to both citizen-science and opportunistic/local community data collection efforts, particularly as the data collection protocol is inexpensive and intuitive. [ABSTRACT FROM AUTHOR]

Comprehensive learning particle swarm optimization (CLPSO) is a powerful state-of-the-art single-objective metaheuristic. Extending from CLPSO, this paper proposes multiswarm CLPSO (MSCLPSO) for multiobjective optimization. MSCLPSO involves multiple swarms, with each swarm associated with a separate original objective. Each particle’s personal best position is determined just according to the corresponding single objective. Elitists are stored externally. MSCLPSO differs from existing multiobjective particle swarm optimizers in three aspects. First, each swarm focuses on optimizing the associated objective using CLPSO, without learning from the elitists or any other swarm. Second, mutation is applied to the elitists and the mutation strategy appropriately exploits the personal best positions and elitists. Third, a modified differential evolution (DE) strategy is applied to some extreme and least crowded elitists. The DE strategy updates an elitist based on the differences of the elitists. The personal best positions carry useful information about the Pareto set, and the mutation and DE strategies help MSCLPSO discover the true Pareto front. Experiments conducted on various benchmark problems demonstrate that MSCLPSO can find nondominated solutions distributed reasonably over the true Pareto front in a single run. [ABSTRACT FROM AUTHOR]

Among different stochastic user equilibrium (SUE) traffic assignment models, the Logit-based stochastic user equilibrium (SUE) is extensively investigated by researchers. It is constantly formulated as the low-level problem to describe the drivers’ route choice behavior in bi-level problems such as network design, toll optimization et al. The Probit-based SUE model receives far less attention compared with Logit-based model albeit the assignment result is more consistent with drivers’ behavior. It is well-known that due to the identical and irrelevant alternative (IIA) assumption, the Logit-based SUE model is incapable to deal with route overlapping problem and cannot account for perception variance with respect to trips. This paper aims to explore the network capacity with Probit-based traffic assignment model and investigate the differences of it is with Logit-based SUE traffic assignment models. The network capacity is formulated as a bi-level programming where the up-level program is to maximize the network capacity through optimizing input parameters (O-D multiplies and signal splits) while the low-level program is the Logit-based or Probit-based SUE problem formulated to model the drivers’ route choice. A heuristic algorithm based on sensitivity analysis of SUE problem is detailed presented to solve the proposed bi-level program. Three numerical example networks are used to discuss the differences of network capacity between Logit-based SUE constraint and Probit-based SUE constraint. This study finds that while the network capacity show different results between Probit-based SUE and Logit-based SUE constraints, the variation pattern of network capacity with respect to increased level of travelers’ information for general network under the two type of SUE problems is the same, and with certain level of travelers’ information, both of them can achieve the same maximum network capacity. [ABSTRACT FROM AUTHOR]

Resource allocation could be influenced by various dynamic elements, such as the skills of engineers and the growth of skills, which requires managers to find an effective and efficient tool to support their staffing decision-making processes. Rescheduling happens commonly and frequently during the project execution. Control options have to be made when new resources are added or tasks are changed. In this paper we propose a software project staffing model considering dynamic elements of staff productivity with a Genetic Algorithm (GA) and Hill Climbing (HC) based optimizer. Since a newly generated reschedule dramatically different from the initial schedule could cause an obvious shifting cost increase, our rescheduling strategies consider both efficiency and stability. The results of real world case studies and extensive simulation experiments show that our proposed method is effective and could achieve comparable performance to other heuristic algorithms in most cases. [ABSTRACT FROM AUTHOR]

Next-generation sequencing (NGS) technologies have led to a huge amount of genomic data that need to be analyzed and interpreted. This fact has a huge impact on the DNA sequence alignment process, which nowadays requires the mapping of billions of small DNA sequences onto a reference genome. In this way, sequence alignment remains the most time-consuming stage in the sequence analysis workflow. To deal with this issue, state of the art aligners take advantage of parallelization strategies. However, the existent solutions show limited scalability and have a complex implementation. In this work we introduce SparkBWA, a new tool that exploits the capabilities of a big data technology as Spark to boost the performance of one of the most widely adopted aligner, the Burrows-Wheeler Aligner (BWA). The design of SparkBWA uses two independent software layers in such a way that no modifications to the original BWA source code are required, which assures its compatibility with any BWA version (future or legacy). SparkBWA is evaluated in different scenarios showing noticeable results in terms of performance and scalability. A comparison to other parallel BWA-based aligners validates the benefits of our approach. Finally, an intuitive and flexible API is provided to NGS professionals in order to facilitate the acceptance and adoption of the new tool. The source code of the software described in this paper is publicly available at , with a GPL3 license. [ABSTRACT FROM AUTHOR]

Data from different agencies share data of the same individuals. Linking these datasets to identify all the records belonging to the same individuals is a crucial and challenging problem, especially given the large volumes of data. A large number of available algorithms for record linkage are prone to either time inefficiency or low-accuracy in finding matches and non-matches among the records. In this paper we propose efficient as well as reliable sequential and parallel algorithms for the record linkage problem employing hierarchical clustering methods. We employ complete linkage hierarchical clustering algorithms to address this problem. In addition to hierarchical clustering, we also use two other techniques: elimination of duplicate records and blocking. Our algorithms use sorting as a sub-routine to identify identical copies of records. We have tested our algorithms on datasets with millions of synthetic records. Experimental results show that our algorithms achieve nearly 100% accuracy. Parallel implementations achieve almost linear speedups. Time complexities of these algorithms do not exceed those of previous best-known algorithms. Our proposed algorithms outperform previous best-known algorithms in terms of accuracy consuming reasonable run times. [ABSTRACT FROM AUTHOR]

Anomaly detection is the process of identifying unexpected items or events in datasets, which differ from the norm. In contrast to standard classification tasks, anomaly detection is often applied on unlabeled data, taking only the internal structure of the dataset into account. This challenge is known as unsupervised anomaly detection and is addressed in many practical applications, for example in network intrusion detection, fraud detection as well as in the life science and medical domain. Dozens of algorithms have been proposed in this area, but unfortunately the research community still lacks a comparative universal evaluation as well as common publicly available datasets. These shortcomings are addressed in this study, where 19 different unsupervised anomaly detection algorithms are evaluated on 10 different datasets from multiple application domains. By publishing the source code and the datasets, this paper aims to be a new well-funded basis for unsupervised anomaly detection research. Additionally, this evaluation reveals the strengths and weaknesses of the different approaches for the first time. Besides the anomaly detection performance, computational effort, the impact of parameter settings as well as the global/local anomaly detection behavior is outlined. As a conclusion, we give an advise on algorithm selection for typical real-world tasks. [ABSTRACT FROM AUTHOR]

Classification based on social dimensions is commonly used to handle the multi-label classification task in heterogeneous networks. However, traditional methods, which mostly rely on the community detection algorithms to extract the latent social dimensions, produce unsatisfactory performance when community detection algorithms fail. In this paper, we propose a novel behavior based social dimensions extraction method to improve the classification performance in multi-label heterogeneous networks. In our method, nodes’ behavior features, instead of community memberships, are used to extract social dimensions. By introducing Latent Dirichlet Allocation (LDA) to model the network generation process, nodes’ connection behaviors with different communities can be extracted accurately, which are applied as latent social dimensions for classification. Experiments on various public datasets reveal that the proposed method can obtain satisfactory classification results in comparison to other state-of-the-art methods on smaller social dimensions. [ABSTRACT FROM AUTHOR]

In order to accelerate computing the convex hull on a set of n points, a heuristic procedure is often applied to reduce the number of points to a set of s points, s ≤ n, which also contains the same hull. We present an algorithm to precondition 2D data with integer coordinates bounded by a box of size p × q before building a 2D convex hull, with three distinct advantages. First, we prove that under the condition min(p, q) ≤ n the algorithm executes in time within O(n); second, no explicit sorting of data is required; and third, the reduced set of s points forms a simple polygonal chain and thus can be directly pipelined into an O(n) time convex hull algorithm. This paper empirically evaluates and quantifies the speed up gained by preconditioning a set of points by a method based on the proposed algorithm before using common convex hull algorithms to build the final hull. A speedup factor of at least four is consistently found from experiments on various datasets when the condition min(p, q) ≤ n holds; the smaller the ratio min(p, q)/n is in the dataset, the greater the speedup factor achieved. [ABSTRACT FROM AUTHOR]

A system for real-time ultrasound (US) elastography will advance interventions for the diagnosis and treatment of cancer by advancing methods such as thermal monitoring of tissue ablation. A multi-stream graphics processing unit (GPU) based accelerated normalized cross-correlation (NCC) elastography, with a maximum frame rate of 78 frames per second, is presented in this paper. A study of NCC window size is undertaken to determine the effect on frame rate and the quality of output elastography images. This paper also presents a novel system for Online Tracked Ultrasound Elastography (O-TRuE), which extends prior work on an offline method. By tracking the US probe with an electromagnetic (EM) tracker, the system selects in-plane radio frequency (RF) data frames for generating high quality elastograms. A novel method for evaluating the quality of an elastography output stream is presented, suggesting that O-TRuE generates more stable elastograms than generated by untracked, free-hand palpation. Since EM tracking cannot be used in all systems, an integration of real-time elastography and the da Vinci Surgical System is presented and evaluated for elastography stream quality based on our metric. The da Vinci surgical robot is outfitted with a laparoscopic US probe, and palpation motions are autonomously generated by customized software. It is found that a stable output stream can be achieved, which is affected by both the frequency and amplitude of palpation. The GPU framework is validated using data from in-vivo pig liver ablation; the generated elastography images identify the ablated region, outlined more clearly than in the corresponding B-mode US images. [ABSTRACT FROM AUTHOR]

The shape diameter function (SDF) is a scalar function defined on a closed manifold surface, measuring the neighborhood diameter of the object at each point. Due to its pose oblivious property, SDF is widely used in shape analysis, segmentation and retrieval. However, computing SDF is computationally expensive since one has to place an inverted cone at each point and then average the penetration distances for a number of rays inside the cone. Furthermore, the shape diameters are highly sensitive to local geometric features as well as the normal vectors, hence diminishing their applications to real-world meshes which often contain rich geometric details and/or various types of defects, such as noise and gaps. In order to increase the robustness of SDF and promote it to a wide range of 3D models, we define SDF by offsetting the input object a little bit. This seemingly minor change brings three significant benefits: First, it allows us to compute SDF in a robust manner since the offset surface is able to give reliable normal vectors. Second, it runs many times faster since at each point we only need to compute the penetration distance along a single direction, rather than tens of directions. Third, our method does not require watertight surfaces as the input—it supports both point clouds and meshes with noise and gaps. Extensive experimental results show that the offset-surface based SDF is robust to noise and insensitive to geometric details, and it also runs about 10 times faster than the existing method. We also exhibit its usefulness using two typical applications including shape retrieval and shape segmentation, and observe a significant improvement over the existing SDF. [ABSTRACT FROM AUTHOR]

The rainbow tradeoff is an algorithm for inverting one-way functions that is widely used in practice to recover passwords from unsalted password hashes. An auxiliary technique referred to as checkpoints can be applied to the rainbow tradeoff to reduce the time taken for these inversions. Working out a rigorous theory that can explain and predict the effects of this technique involves delicate manipulations of the random function and is thus a challenging task. In this work, we compare three existing theoretical analyses of the checkpoint technique. We first demonstrate that the claims made by the three works are incompatible with each other. We then carry out experiments designed to highlight these incompatibilities, obtaining experimental evidences that show just one of the three analyses to be correct. Finally, we discuss the obscure theoretical errors made by the two inadequate analyses. [ABSTRACT FROM AUTHOR]