Search

The elderly population in China is continuously increasing, and the disabled account for a large proportion of the elderly population. An effective solution is urgently needed for incontinence among disabled elderly people. Compared with disposable adult diapers, artificial sphincter implantation and medication for incontinence, the defecation pre-warning method is more flexible and convenient. However, due to the complex human physiology and individual differences, its development is limited. Based on the aging trend of the population and clinical needs, this paper proposes a bowel sound acquisition system and a defecation pre-warning method and system based on a semi-supervised generative adversarial network. A network model was established to predict defecation using bowel sounds. The experimental results show that the proposed method can effectively classify bowel sounds with or without defecation tendency, and the accuracy reached 94.4%. [ABSTRACT FROM AUTHOR]

Due to the rapid increase in private car ownership in China, most cities face the problem of insufficient parking spaces, leading to frequent occurrences of parking space conflicts. There is a wide variety of parking locks available on the market. However, most of them lack advanced intelligence and cannot cater to the growing diverse needs of people. The present study attempts to devise a smart parking lock to tackle this issue. Specifically, the smart parking lock uses a Raspberry Pi as the core controller, senses the vehicle with an ultrasonic ranging module, and collects the license plate image with a camera. In addition, algorithms for license plate recognition based on traditional image-processing methods typically require a high pixel resolution, but their recognition accuracy is often low. Therefore, we propose a new algorithm called UNET-GWO-SVM to achieve higher accuracy in embedded systems. Moreover, we developed a WeChat mini program to control the smart parking lock. Field tests were conducted on campus to evaluate the performance of the parking locks. The test results show that the corresponding effective unlocking rate is 99.0% when the recognition error is less than two license plate characters. The average time consumption is controlled at about 2 s. It can meet real-time requirements. [ABSTRACT FROM AUTHOR]

Condition-monitoring and anomaly-detection methods used for the assessment of wind turbines are key to reducing operation and maintenance (O&M) cost and improving their reliability. In this study, based on the sparrow search algorithm (SSA), bidirectional long short-term memory networks with a self-attention mechanism (SABiLSTM), and a binary segmentation changepoint detection algorithm (BinSegCPD), a condition-monitoring method (SSA-SABiLSTM-BinSegCPD, SSD) used for wind turbines is proposed. Specifically, the self-attention mechanism, which can mine the nonlinear dynamic characteristics and spatial–temporal features inherent in the SCADA time series, was introduced into a two-layer BiLSTM network to establish a normal-behavior model for wind turbine key components. Then, as a result of the advantages of searching precision and convergence rate methods, the sparrow search algorithm was employed to optimize the constructed SABiLSTM model. Moreover, the BinSegCPD algorithm was applied to the predicted residual sequence to achieve the automatic identification of deterioration conditions for wind turbines. Case studies conducted on multiple wind turbines located in south China showed that the established SSA-SABiLSTM model was superior to other contrast models, achieving a better prediction precision in terms of RMSE, MAE, MAPE, and R2. The MAE, RMSE, and MAPE of SSA-SABiLSTM were 0.2543 °C, 0.3412 °C, and 0.0069, which were 47.23%, 42.19%, and 53.38% lower than those of SABiLSTM, respectively. The R2 of SABiLSTM was 0.9731, which was 4.6% higher than that of SABiLSTM. The proposed SSD method can detect deterioration conditions 47–120 h in advance and trigger fault alarm signals approximately 36 h ahead of the actual failure time. [ABSTRACT FROM AUTHOR]

Pseudolite deployment is the premise of ground-based pseudolite system networking, which affects the coverage and positioning accuracy of ground-based pseudolite systems. Optimal deployment algorithms can help to achieve a higher signal coverage and lower mean horizontal precision factor (HDOP) with a limited number of pseudolites. In this paper, we proposed a multi-objective particle swarm optimization (MOPSO) algorithm for the deployment of a ground-based pseudolite system. The new algorithm combines Digital Elevation Model (DEM) data and uses the mean HDOP of the DEM grid to measure the geometry of the pseudolite system. The signal coverage of the pseudolite system was calculated based on the visual area analysis with respect to reference planes, which effectively avoids the repeated calculation of the intersection and improves the calculation efficiency. A selected area covering 10 km×10 km in the Jiuzhaigou area of China was used to verify the new algorithm. The results showed that both the coverage and HDOP achieved were optimal using the new algorithm, where the coverage area can be up to approximately 50% and 30% more than using the existing particle swarm optimization (PSO) and convex polyhedron volume optimization (CPVO) algorithms, respectively. [ABSTRACT FROM AUTHOR]

Mountainous regions are prone to dammed lake disasters due to their rough topography, scant vegetation, and high summer rainfall. By measuring water level variation, monitoring systems can detect dammed lake events when mudslides block rivers or boost water level. Therefore, an automatic monitoring alarm method based on a hybrid segmentation algorithm is proposed. The algorithm uses the k-means clustering algorithm to segment the picture scene in the RGB color space and the region growing algorithm on the image green channel to select the river target from the segmented scene. The pixel water level variation is used to trigger an alarm for the dammed lake event after the water level has been retrieved. In the Yarlung Tsangpo River basin of the Tibet Autonomous Region of China, the proposed automatic lake monitoring system was installed. We pick up data from April to November 2021, during which the river experienced low, high, and low water levels. Unlike conventional region growing algorithms, the algorithm does not rely on engineering knowledge to pick seed point parameters. Using our method, the accuracy rate is 89.29% and the miss rate is 11.76%, which is 29.12% higher and 17.65% lower than the traditional region growing algorithm, respectively. The monitoring results indicate that the proposed method is a highly adaptable and accurate unmanned dammed lake monitoring system. [ABSTRACT FROM AUTHOR]

Rail surface scratching occurs with increasing frequency, seriously threatening the safety of vehicles and humans. Online repair of rail-surface scratches on damaged rails with scratch depths >1 mm is of increased importance, because direct rail-replacement has the disadvantages of long operation time, high manpower and high material costs. Advanced online repair of rail-surface scratch using three-dimensional (3D) metal printing technology such as laser cladding has become an increasing trend, desperately demanding a solution for the fast and precise establishment of a complete closed mesh model of rail-surface scratch data. However, there have only been limited studies on the topic so far. In this paper, the complete closed mesh model is well established based on a novel triangulation algorithm relying on the topological features of the point-cloud model (PCM) of scratch-data, which is obtained by implementing a scratch-data-computation process following a rail-geometric-feature-fused algorithm of random sample consensus (RANSAC) performed on the full rail-surface PCM constructed by 3D laser vision. The proposed method is universal for all types of normal-speed rails in China. Experimental results show that the proposed method can accurately acquire the complete closed mesh models of scratch data of one meter of 50 Kg/m-rails within 1 min. [ABSTRACT FROM AUTHOR]

The MODerate resolution Imaging Spectroradiometer (MODIS) and the Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) are onboard the same satellite platform NASA TERRA. Both MODIS and ASTER offer routine retrieval of land surface temperatures (LSTs), and the ASTER- and MODIS-retrieved LST products have been used worldwide. Because a large fraction of the earth surface consists of mountainous areas, variations in elevation, terrain slope and aspect angles can cause biases in the retrieved LSTs. However, terrain-induced effects are generally neglected in most satellite retrievals, which may generate discrepancy between ASTER and MODIS LSTs. In this paper, we reported the terrain effects on the LST discrepancy with a case examination over a relief area at the Loess Plateau of China. Results showed that the terrain-induced effects were not major, but nevertheless important for the total LST discrepancy. A large local slope did not necessarily lead to a large LST discrepancy. The angle of emitted radiance was more important than the angle of local slope in generating the LST discrepancy. Specifically, the conventional terrain correction may be unsuitable for densely vegetated areas. The distribution of ASTER-to-MODIS emissivity suggested that the terrain correction was included in the generalized split window (GSW) based approach used to rectify MODIS LSTs. Further study should include the classification-induced uncertainty in emissivity for reliable use of satellite-retrieved LSTs over relief areas. [ABSTRACT FROM AUTHOR]

The crowning objective of this research was to identify a better cloud classification method to upgrade the current window-based clustering algorithm used operationally for China's first operational geostationary meteorological satellite FengYun-2C (FY-2C) data. First, the capabilities of six widely-used Artificial Neural Network (ANN) methods are analyzed, together with the comparison of two other methods: Principal Component Analysis (PCA) and a Support Vector Machine (SVM), using 2864 cloud samples manually collected by meteorologists in June, July, and August in 2007 from three FY-2C channel (IR1, 10.3-11.3 μm; IR2, 11.5-12.5 μm and WV 6.3-7.6 μm) imagery. The result shows that: (1) ANN approaches, in general, outperformed the PCA and the SVM given sufficient training samples and (2) among the six ANN networks, higher cloud classification accuracy was obtained with the Self-Organizing Map (SOM) and Probabilistic Neural Network (PNN). Second, to compare the ANN methods to the present FY-2C operational algorithm, this study implemented SOM, one of the best ANN network identified from this study, as an automated cloud classification system for the FY-2C multi-channel data. It shows that SOM method has improved the results greatly not only in pixel-level accuracy but also in cloud patch-level classification by more accurately identifying cloud types such as cumulonimbus, cirrus and clouds in high latitude. Findings of this study suggest that the ANN-based classifiers, in particular the SOM, can be potentially used as an improved Automated Cloud Classification Algorithm to upgrade the current window-based clustering method for the FY-2C operational products. [ABSTRACT FROM AUTHOR]

DEM-based topographic corrections on Landsat-7 ETM+ imagery from rugged terrain, as an effective processing techniques to improve the accuracy of Land Use/Land Cover (LULC) classification as well as land surface parameter retrievals with remotely sensed data, has been frequently reported in the literature. However, few studies have investigated the exact effects of DEM with different resolutions on the correction of imagery. Taking the topographic corrections on the Landsat-7 ETM+ images acquired from the rugged terrain of the Yangjiahe river basin (P.R. China) as an example, the present work systematically investigates such issues by means of two commonly used topographic correction algorithms with the support of different spatial resolution DEMs. After the pre-processing procedures, i.e. atmospheric correction and geo-registration, were applied to the ETM+ images, two topographic correction algorithms, namely SCS correction and Minnaert correction, were applied to assess the effects of different spatial resolution DEMs obtained from two sources in the removal of topographic effects and LULC classifications. The results suggested that the topographic effects were tremendously reduced with these two algorithms under the support of different spatial resolution DEMs, and the performance of the topographic correction with the 1:50,000- topographic-map DEM was similar to that achieved using SRTM DEM. Moreover, when the same topographic correction algorithm was applied the accuracy of LULC classification after topographic correction based on 1:50,000-topographic-map DEM was similar as that based on SRTM DEM, which implies that the 90 m SRTM DEM can be used as an alternative for the topographic correction of ETM+ imagery when high resolution DEM is unavailable. [ABSTRACT FROM AUTHOR]

With the rise of online/mobile transactions, the cost of cash-out has decreased and the cost of detection has increased. In the world of online/mobile payment in IoT, merchants and credit cards can be applied and approved online and used in the form of a QR code but not a physical card or Point of Sale equipment, making it easy for these systems to be controlled by a group of fraudsters. In mainland China, where the credit card transaction fee is, on average, lower than a retail loan rate, the credit card cash-out option is attractive for people for an investment or business operation, which, after investigation, can be considered unlawful if over a certain amount is used. Because cash-out will incur fees for the merchants, while bringing money to the credit cards' owners, it is difficult to confirm, as nobody will declare or admit it. Furthermore, it is more difficult to detect cash-out groups than individuals, because cash-out groups are more hidden, which leads to bigger transaction amounts. We propose a new method for the detection of cash-out groups. First, the seed cards are mined and the seed cards' diffusion is then performed through the local graph clustering algorithm (Approximate PageRank, APR). Second, a merchant association network in IoT is constructed based on the suspicious cards, using the graph embedding algorithm (Node2Vec). Third, we use the clustering algorithm (DBSCAN) to cluster the nodes in the Euclidean space, which divides the merchants into groups. Finally, we design a method to classify the severity of the groups to facilitate the following risk investigation. The proposed method covers 145 merchants from 195 known risky merchants in groups that acquire cash-out from four banks, which shows that this method can identify most (74.4%) cash-out groups. In addition, the proposed method identifies a further 178 cash-out merchants in the group within the same four acquirers, resulting in a total of 30,586 merchants. The results and framework are already adopted and absorbed into the design for a cash-out group detection system in IoT by the Chinese payment processor. [ABSTRACT FROM AUTHOR]

Downward surface solar radiation (Rs) plays a dominant role in determining the climate and environment on the Earth. However, the densely distributed ground observations of Rs are usually insufficient to meet the increasing demand of the climate diagnosis and analysis well, so it is essential to build a long-term accurate Rs dataset. The extremely randomized trees (ERT) algorithm was used to generate Rs using routine meteorological observations (2000–2015) from the Climate Data Center of the Chinese Meteorological Administration (CDC/CMA). The estimated Rs values were validated against ground measurements at the national scale with an overall correlation coefficient value of 0.97, a mean bias of 0.04 Wm−2, a root-mean-square-error value of 23.12 Wm−2, and a mean relative error of 9.81%. It indicates that the estimated Rs from the ERT-based model is reasonably accurate. Moreover, the ERT-based model was used to generate a new daily Rs dataset at 756 CDC/CMA stations from 1958 to 2015. The long-term variation trends of Rs at 454 stations covering 46 consecutive years (1970–2015) were also analyzed. The Rs in China showed a significant decline trend (−1.1 Wm−2 per decade) during 1970–2015. A decreasing trend (−2.8 Wm−2 per decade) in Rs during 1970–1992 was observed, followed by a recovery trend (0.23 Wm−2 per decade) during 1992–2015. The recovery trends at individual stations were found at 233 out of 454 stations during 1970–2015, which were mainly located in southern and northern China. The new Rs dataset would substantially provide basic data for the related studies in agriculture, ecology, and meteorology. [ABSTRACT FROM AUTHOR]

Accurate and efficient extraction of cultivated land data is of great significance for agricultural resource monitoring and national food security. Deep-learning-based classification of remote-sensing images overcomes the two difficulties of traditional learning methods (e.g., support vector machine (SVM), K-nearest neighbors (KNN), and random forest (RF)) when extracting the cultivated land: (1) the limited performance when extracting the same land-cover type with the high intra-class spectral variation, such as cultivated land with both vegetation and non-vegetation cover, and (2) the limited generalization ability for handling a large dataset to apply the model to different locations. However, the "pooling" process in most deep convolutional networks, which attempts to enlarge the sensing field of the kernel by involving the upscale process, leads to significant detail loss in the output, including the edges, gradients, and image texture details. To solve this problem, in this study we proposed a new end-to-end extraction algorithm, a high-resolution U-Net (HRU-Net), to preserve the image details by improving the skip connection structure and the loss function of the original U-Net. The proposed HRU-Net was tested in Xinjiang Province, China to extract the cultivated land from Landsat Thematic Mapper (TM) images. The result showed that the HRU-Net achieved better performance (Acc: 92.81%; kappa: 0.81; F1-score: 0.90) than the U-Net++ (Acc: 91.74%; kappa: 0.79; F1-score: 0.89), the original U-Net (Acc: 89.83%; kappa: 0.74; F1-score: 0.86), and the Random Forest model (Acc: 76.13%; kappa: 0.48; F1-score: 0.69). The robustness of the proposed model for the intra-class spectral variation and the accuracy of the edge details were also compared, and this showed that the HRU-Net obtained more accurate edge details and had less influence from the intra-class spectral variation. The model proposed in this study can be further applied to other land cover types that have more spectral diversity and require more details of extraction. [ABSTRACT FROM AUTHOR]

Increasing the area of planted forests is rather important for compensation the loss of natural forests and slowing down the global warming. Forest growing stem volume (GSV) is a key indicator for monitoring and evaluating the quality of planted forest. To improve the accuracy of planted forest GSV located in south China, four L-band ALOS PALSAR-2 quad-polarimetric synthetic aperture radar (SAR) images were acquired from June to September with short intervals. Polarimetric characteristics (un-fused and fused) derived by the Yamaguchi decomposition from time series SAR images with different intervals were considered as independent variables for the GSV estimation. Then, the general linear model (GLM) obeyed the exponential distribution were proposed to retrieve the stand-level GSV in plantation. The results show that the un-fused power of double bounce scatters and four fused variables derived from single SAR image is highly sensitive to the GSV, and these polarimeric characteristics derived from the time series images more significantly contribute to improved estimation of GSV. Moreover, compared with the estimated GSV using the semi-exponential model, the employed GLM model with less limitations and simple algorithm has a higher saturation level (nearly to 300 m3/ha) and higher sensitivity to high forest GSV values than the semi-exponential model. Furthermore, by reducing the external disturbance with the help of time average, the accuracy of estimated GSV is improved using fused polarimeric characteristics, and the estimation accuracy of forest GSV was improved as the images increase. Using the fused polarimetric characteristics (Dbl×Vol/Odd) and the GLM, the minimum RRMSE was reduced from 33.87% from single SAR image to 24.42% from the time series SAR images. It is implied that the GLM is more suitable for polarimetric characteristics derived from the time series SAR images and has more potential to improve the planted forest GSV. [ABSTRACT FROM AUTHOR]

Forest plays a significant role in the global carbon budget and ecological processes. The precise mapping of forest cover can help significantly reduce uncertainties in the estimation of terrestrial carbon balance. A reliable and operational method is necessary for a rapid regional forest mapping. In this study, the goal relies on mapping forest and subcategories in Northeast China through the use of high spatio-temporal resolution HJ-1 imagery and time series vegetation indices within the context of an object-based image analysis and decision tree classification. Multi-temporal HJ-1 images obtained in a single year provide an opportunity to acquire phenology information. By analyzing the difference of spectral and phenology information between forest and non-forest, forest subcategories, decision trees using threshold values were finally proposed. The resultant forest map has a high overall accuracy of 0.91 ± 0.01 with a 95% confidence interval, based on the validation using ground truth data from field surveys. The forest map extracted from HJ-1 imagery was compared with two existing global land cover datasets: GlobCover 2009 and MCD12Q1 2009. The HJ-1-based forest area is larger than that of MCD12Q1 and GlobCover and more closely resembles the national statistics data on forest area, which accounts for more than 40% of the total area of the Northeast China. The spatial disagreement primarily occurs in the northern part of the Daxing'an Mountains, Sanjiang Plain and the southwestern part of the Songliao Plain. The compared result also indicated that the forest subcategories information from global land cover products may introduce large uncertainties for ecological modeling and these should be cautiously used in various ecological models. Given the higher spatial and temporal resolution, HJ-1-based forest products could be very useful as input to biogeochemical models (particularly carbon cycle models) that require accurate and updated estimates of forest area and type. [ABSTRACT FROM AUTHOR]