Search

Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one's written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger. [ABSTRACT FROM AUTHOR]

Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g−1 at a current density of 200 mA g−1. The energy density of the IPZIB is observed as 330.15 Wh kg−1 at a power density of 220 W kg−1 and retains an energy density of 94.36 Wh kg−1 at a high power density of 1650 W kg−1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices. [ABSTRACT FROM AUTHOR]

As the social organism, Polistes wasps build a communal nest using woody fibers with saliva for sustaining brood and adult population throughout the season. Limited information exists regarding the identification specific plant materials employed in wasp nest building. Thus, we firstly tested if the DNA metabarcoding approach utilizing rbcL and trnL molecular markers could identify the plant species quantitatively and qualitatively inform the mixed-origin woody samples. A threshold of 0.01 proportion of reads was applied for rbcL and trnL molecular markers, while this threshold for median proportion was 0.0025. In assessing taxa richness, the median proportion demonstrated superior performance, exhibiting higher taxa detection power, however, rbcL marker outperformed in quantitative analysis. Subsequently, we applied DNA metabarcoding to identify the plant materials from the nests of two Polistes species, P. mandarinus and P. rothneyi. The results showed that higher preference of Quercus and Robinia as the major nest building materials regardless of the surrounding plant communities, by two wasp species. Material diversity was higher for P. rothneyi than P. mandarinus, which may explain the abundance of this species possibly with heightened adaptive capacities in their nesting behavior. This study demonstrated that DNA metabarcoding could identify the complex nest-building plant materials of paper wasps and provide insights into their ecological interactions in the natural ecosystem. [ABSTRACT FROM AUTHOR]

Metagenomics has revolutionized access to genomic information of microorganisms inhabiting the gut of herbivorous animals, circumventing the need for their isolation and cultivation. Exploring these microorganisms for novel hydrolytic enzymes becomes unattainable without utilizing metagenome sequencing. In this study, we harnessed a suite of bioinformatic analyses to discover a novel cellulase-degrading enzyme from the camel rumen metagenome. Among the protein-coding sequences containing cellulase-encoding domains, we identified and subsequently cloned and purified a promising candidate cellulase enzyme, Celcm05-2, to a state of homogeneity. The enzyme belonged to GH5 subfamily 4 and exhibited robust enzymatic activity under acidic pH conditions. It maintained hydrolytic activity under various environmental conditions, including the presence of metal ions, non-ionic surfactant Triton X-100, organic solvents, and varying temperatures. With an optimal temperature of 40 °C, Celcm05-2 showcased remarkable efficiency when deployed on crystalline cellulose (> 3.6 IU/mL), specifically Avicel, thereby positioning it as an attractive candidate for a myriad of biotechnological applications spanning biofuel production, paper and pulp processing, and textile manufacturing. Efficient biodegradation of waste paper pulp residues and the evidence of biopolishing suggested that Celcm05-2 can be used in the bioprocessing of cellulosic craft fabrics in the textile industry. Our findings suggest that the camel rumen microbiome can be mined for novel cellulase enzymes that can find potential applications across diverse biotechnological processes. [ABSTRACT FROM AUTHOR]

To achieve integrated resource utilization of graphite tailings to improve their water-holding capacity, river silt and cow dung powder were added to graphite tailings as organic matter improvers. Improver ratios were designed using 4 g cow dung powder and 20, 30, and 50 g river silt. Soil–water characterization tests were performed using a combined tensiometer and filter paper method based on optimum density measurements. Analysis of the influence of river silt dosing on the soil–water characteristic curves of improved graphite tailing specimens was performed with data fitting using the Van Genuchten model. Here, we investigated the effect of river silt dosing on the internal pore structure and water-holding capacity of modified graphite tailing samples and verified the applicability of the model to graphite tailings. Our results demonstrate that the organic matter improver incorporated into graphite tailings can improve the internal structural compactness of graphite tailings, improving the water holding capacity. With an increase in river silt dosage, the saturated water content is larger, and the residual water content increases and then decreases. When river silt dosage is 30 g, the residual water content is the highest at a value of 3.32%. The van Genuchten model was highly accurate for assessing the graphite tailings. With an increase in river silt doping, the internal pore space first decreased and then increased, and the internal structure gradually became compact and loosened. The internal structure was in the optimal state in the experimental study when the dosage of cow dung powder was 4 g and the dosage of river silt was 30 g. The water holding capacity was optimal at this time. The results of this study provide a theoretical foundation for graphite-tailing-based mine reclamation and play a guiding role in exploring the value of the hydraulic characteristic index parameters when applying graphite tailings engineering. [ABSTRACT FROM AUTHOR]

For shaped charge blasting projects in mining, civil engineering, and similar fields, it is proposed to modify the charge structure by combining slotted tubes and shaped charge liners to obtain a new type of charge structure. This aims to achieve directional rock breaking through the focused action of the shaped charge. The influence of different slotted pipe materials on the directional rock-breaking effect of concentrated energy using a new charge structure is explored through theoretical analysis combined with model test study, high-speed camera, stress–strain gauge, and other equipment. A comparison is made between slotted pipes made of aluminum, kraft paper, and PVC, with the cutting width of 2 mm. Based on the characteristics of the cracks formed after blasting, the new charge structure made of aluminum slotted pipe produces a penetrating crack that is almost consistent with the pre-cracking direction. Based on the corresponding characteristics of successively released blasting energy, the guiding and convergence effect of the new charge structure made of aluminum slotted pipe on the explosion energy is greater than that of the new charge structure made of the other two types of slotted pipe material. According to the strain data measured after blasting, the peak arrival time of the strain peak in the direction of the slotted pipe on one side of the shaped hood is shorter than that in the other two directions, and the peak strain is greater than that in the other two directions while having a better energy gathering effect. Based on the findings, the new charge structure with directional energy concentration has a damage reduction effect. Furthermore, the material of aluminum slotted pipe is found to be better than PVC slotted pipe, whereas the material of PVC slotted pipe is better than kraft paper slotted pipe in achieving directional rock breaking. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) have gained much attention in recent years because of their improved energy conversion efficiency, simple fabrication process, low processing temperature, flexibility, light weight, and low cost of constituent materials when compared with their counterpart silicon based solar cells. Besides, stability and toxicity of PSCs and low power conversion efficiency have been an obstacle towards commercialization of PSCs which has attracted intense research attention. In this research paper, a Glass/Cu2O/CH3NH3SnI3/ZnO/Al inverted device structure which is made of cheap inorganic materials, n-type transparent conducting oxide (TCO)-free, stable, photoexcited toxic-free perovskite have been carefully designed, simulated and optimized using a one-dimensional solar cell capacitance simulator (SCAPS-1D) software. The effects of layers' thickness, perovskite's doping concentration and back contact electrodes have been investigated, and the optimized structure produced an open circuit voltage (Voc) of 1.0867 V, short circuit current density (JSC) of 33.4942 mA/cm2, fill factor (FF) of 82.88% and power conversion efficiency (PCE) of 30.17%. This paper presents a model that is first of its kind where the highest PCE performance and eco-friendly n-type TCO-free inverted CH3NH3SnI3 based perovskite solar cell is achieved using all-inorganic transport materials. [ABSTRACT FROM AUTHOR]

Reservoir flood control scheduling is a challenging optimization task, particularly due to the complexity of various constraints. This paper proposes an innovative algorithm design approach to address this challenge. Combining the basic walrus optimization algorithm with the adaptive ε-constraint method and introducing the SPM chaotic mapping for population initialization, spiral search strategy, and local enhancement search strategy based on Cauchy mutation and reverse learning significantly enhances the algorithm's optimization performance. On this basis, innovate an adaptive approach ε A New Algorithm for Constraints and Multi Strategy Optimization Improvement (ε-IWOA). To validate the performance of the ε-IWOA algorithm, 24 constrained optimization test functions are used to test its optimization capabilities and effectiveness in solving constrained optimization problems. Experimental results demonstrate that the ε-IWOA algorithm exhibits excellent optimization ability and stable performance. Taking the Taolinkou Reservoir, Daheiting Reservoir, and Panjiakou Reservoir in the middle and lower reaches of the Luanhe River Basin as a case study, this paper applies the ε-IWOA algorithm to practical reservoir scheduling problems by constructing a three-reservoir flood control scheduling system with Luanxian as the control point. A comparative analysis is conducted with the ε-WOA, ε-DE and ε-PSO (particle swarm optimization) algorithms.The experimental results indicate that ε-IWOA algorithm performs the best in optimization, with the occupied flood control capacity of the three reservoirs reaching 89.32%, 90.02%, and 80.95%, respectively. The control points in Luan County can reduce the peak by 49%.This provides a practical and effective solution method for reservoir optimization scheduling models. This study offers new ideas and solutions for flood control optimization scheduling of reservoir groups, contributing to the optimization and development of reservoir scheduling work. [ABSTRACT FROM AUTHOR]

With the rapid development of modern medical technology and the dramatic increase in the amount of medical data, traditional centralized medical information management is facing many challenges. In recent years blockchain, which is a peer-to-peer distributed database, has been increasingly accepted and adopted by different industries and use cases. Key areas of healthcare blockchain applications include electronic medical record (EMR) management, medical device supply chain management, remote condition monitoring, insurance claims and personal health data (PHD) management, among others. Even so, there are a number of challenges in applying blockchain concepts to healthcare and its data, including interoperability, data security privacy, scalability, TPS and so on. While these challenges may hinder the development of blockchain in healthcare scenarios, they can be improved with existing technologies In this paper, we propose a blockchain-based healthcare operations management framework that is combined with the Interplanetary File System (IPFS) for managing EMRs, protects data privacy through a distributed approach while ensuring that this medical ledger is tamper-proof. Doctors act as full nodes, patients can participate in network maintenance either as light nodes or as full nodes, and the hospital acts as the endpoint database of data, i.e., the IPFS node, which saves the arithmetic power of nodes and allows the data stored in the hospitals and departments to be shared with the other organizations that have uploaded the data. Therefore, the integration of blockchain and zero-knowledge proof proposed in this paper helps to protect data privacy and is efficient, better scalable, and more throughput. [ABSTRACT FROM AUTHOR]

Green finance (GF) is recognized as a key driver of sustainable development. While existing studies have extensively discussed the relationship between GF and the Sustainable Development Goals (SDGs), few have explored the coupling coordination relationship between GF and SDGs. In this paper, we use data from thirty Chinese provinces (municipalities and autonomous regions) from 2008–2021 to examine the degree of coupling coordination development (CCD) between GF and the SDGs systems using the CCD model. We find that most SDGs and their sub-goals exhibit a significant upward trend, except for SDG8, 14–16. GF presents a fluctuating upward trend, with a significant decline in 2010 and 2019. The CCDs between GF and SDGs and their sub-goals generally show an M-shaped upward trend in most regions, with most of them experiencing a synchronous decline in 2011–2012 and 2019. In the analysis of regional heterogeneity, the eastern region performs better in SDG8–9, the central region performs better in SDG3, 14–15, while the western region performs better in SDG7. This paper provides empirical evidence for a further in-depth understanding of the relationship between GF and SDGs, which can contribute to advancing GF development and the SDG process. [ABSTRACT FROM AUTHOR]

Buildings are energy- and resource-hungry: their construction and use account for around 39% of global carbon dioxide emissions; they consume around 40% of all the energy produced; they are responsible for over 35% of the EU's total waste generation; and account for about 50% of all extracted (fossil) materials. Therefore, they present a significant challenge to meeting national and international Net Zero targets of reducing greenhouse emissions and fossil resource use. The CircularB Project, is at the heart of this issue, which will underpin synergies of multi-scale circular perspectives (from materials, to components, to assets and built environments), digital transformation solutions, data-driven and complexity science, stakeholder behavioral science, and interdisciplinary capabilities towards achievable, affordable and marketable circular solutions for both new and existing buildings, for sustainable urban design, and for circular built environments across Europe. This paper contributes to the project by deriving new insights into the stakeholders' influences, inter-relationships, and obstacles in the implementation of circular economy concepts on existing building stocks in Europe, which represent over 90% of whole building assets. In order to identify and derive the insights, our study is rigorously based on (i) a robust critical literature review of key documentations such as articles, standards, policy reports, strategic roadmaps and white papers; and (ii) interviews with relevant stakeholders and decision makers. Uniquely, our work spans across all scales of CE implementation from materials, to products and components, to existing building stocks, and to living built environments. The findings point out the current challenges and obstacles required to be tackled. Inadequacies of financial incentives and governmental enforcement (via policy, legislation, or directive) are commonly found to be the most critical obstacles found throughout Europe. Circular economy is the global challenge and not just a single country can resolve the climate issue without the cooperation of other countries. The insights thus highlight the essential need for harmonized actions and tactical/pragmatic policies promoted and regulated by the European Commission, national and local governments who can dominate the influence, promote inter-relationship, and overcome the barriers towards circular economy much more effectively. [ABSTRACT FROM AUTHOR]

The development of DC microgrids is reliant on multi-input converters, which offer several advantages, including enhanced DC power generation and consumption efficiency, simplified quality, and stability. This paper describes the development of a multiple input supply based modified SEPIC DC–DC Converter for efficient management of DC microgrid that is powered by two DC sources. Here Multi-Input SEPIC converter offers both versatility in handling output voltage ranges and efficiency in power flow, even under challenging operating conditions like lower duty cycle values. These features contribute to the converter's effectiveness in managing power within a DC microgrid. In this configuration, the DC sources can supply energy to the load together or separately, depending on how the power switches operate. The detailed working states with equivalent circuit diagrams and theoretical waveforms, under steady-state conditions, are shown along with the current direction equations. This paper also demonstrates the typical analysis of large-signal, small-signal, steady-state modeling techniques and detailed design equations. The proposed configuration is validated through the conceptual examination using theoretical and comprehensive MATLAB simulation results. Detailed performance analysis has been done for different cases with various duty ratios. Finally, to show the competitiveness, the multi-input SEPIC topology is compared with similar recent converters. [ABSTRACT FROM AUTHOR]

In a coal mine, air leakage exists in some roadways through doors and other ventilation structures inevitably. Based on this opinion, there are different views on whether these roadways must be assigned airflow in coal mine ventilation design. This paper analyses some relevant regulations and criteria on the designed air quantity of coal mines. Then, based on the ventilation design of the Guizhou Yizhong Coal Mine, through the study of the calculation of needed air quantity of every working place and its distribution method in coal mine ventilation design, this paper puts forward that explosion-proof door, safety exit, and other short distance roadways with ventilation structures need not assign airflow in coal mine ventilation design, while some long-distance roadways need. Additionally, it presents the main reason to support this opinion, gives the distribution method of inner air leakage quantity, which comes with the calculation of the designed mine total air quantity, puts forward the remedy method for the air leakage through ventilation structures in a coal mine ventilation system, then offers the mine operator with the basic opinions for the day-to-day planning and effective operation of a coal mine ventilation system. [ABSTRACT FROM AUTHOR]

In the late stage of underground brine mining in salt lakes, the method of injecting fresh water is often used to extract the salt from the brine storage medium. This method of freshwater displacement breaks the original water–rock equilibrium and changes the evolution process of the original underground brine. To explore the mechanism of salt release in saline water-bearing media under conditions of relatively fresh lake water dissolution, this paper analyzes the changes in the chemical parameters of brine from 168 sampling points in the Mahai salt lake in the Qaidam Basin at three stages (before exploitation, during exploitation, and late exploitation) by correlation analysis, ion ratio analysis, and other methods and investigate the variations in porosity and the evolution laws of brine. The results show that the changes in the main ion content and brine mineralization during the exploitation process are small. The changes in Ca2+ content are significant due to the low solubility of calcium minerals, the precipitation of gypsum during the mixing process, and the adsorption of cations by alternating with Ca2+. Primary intergranular pore skeletons are easily corroded to form secondary pores, which increase the geological porosity. Na+ and Cl- are the dominant ions in the brine in the study area, but the concentration of Ca2 + decreased significantly under the influence of mining, by 41.7% in the middle period and 24.5% in the late period. The correlation between Ca2+ and salinity changes significantly in different mining stages, and the reason for the decrease of Ca2+ may be due to the influence of mineral dissolution, mixing, and anion-cation exchange. The porosity of the layer in the study area showed the opposite trend of Ca2+, and the porosity increased first and then decreased. The innovation of this paper lies in analyzing the reasons and mechanisms of the disturbance of artificial dissolution mining on stratum structure by comparing the hydrochemical characteristics and porosity of underground brine storage media in three different mining stages. The research in this paper provides a theoretical basis for the calculation of brine resource reserves and the sustainable development of underground brine in salt lake areas. [ABSTRACT FROM AUTHOR]

De-mining operations are of critical importance for humanitarian efforts and safety in conflict-affected regions. In this paper, we address the challenge of enhancing the accuracy and efficiency of mine detection systems. We present an innovative Deep Learning architecture tailored for pulse induction-based Metallic Mine Detectors (MMD), so called DL-MMD. Our methodology leverages deep neural networks to distinguish amongst nine distinct materials with an exceptional validation accuracy of 93.5%. This high level of precision enables us not only to differentiate between anti-personnel mines, without metal plates but also to detect minuscule 0.2-g vertical paper pins in both mineralized soil and non-mineralized environments. Moreover, through comparative analysis, we demonstrate a substantial 3% and 7% improvement (approx.) in accuracy performance compared to the traditional K-Nearest Neighbors and Support Vector Machine classifiers, respectively. The fusion of deep neural networks with the pulse induction-based MMD not only presents a cost-effective solution but also significantly expedites decision-making processes in de-mining operations, ultimately contributing to improved safety and effectiveness in these critical endeavors. [ABSTRACT FROM AUTHOR]

The object scale of a small object scene changes greatly, and the object is easily disturbed by a complex background. Generic object detectors do not perform well on small object detection tasks. In this paper, we focus on small object detection based on FocusDet. FocusDet refers to the small object detector proposed in this paper. It consists of three parts: backbone, feature fusion structure, and detection head. STCF-EANet was used as the backbone for feature extraction, the Bottom Focus-PAN for feature fusion, and the detection head for object localization and recognition.To maintain sufficient global context information and extract multi-scale features, the STCF-EANet network backbone is used as the feature extraction network.PAN is a feature fusion module used in general object detectors. It is used to perform feature fusion on the extracted feature maps to supplement feature information.In the feature fusion network, FocusDet uses Bottom Focus-PAN to capture a wider range of locations and lower-level feature information of small objects.SIOU-SoftNMS is the proposed algorithm for removing redundant prediction boxes in the post-processing stage. SIOU multi-dimension accurately locates the prediction box, and SoftNMS uses the Gaussian algorithm to remove redundant prediction boxes. FocusDet uses SIOU-SoftNMS to address the missed detection problem common in dense tiny objects.The VisDrone2021-DET and CCTSDB2021 object detection datasets are used as benchmarks, and tests are carried out on VisDrone2021-det-test-dev and CCTSDB-val datasets. Experimental results show that FocusDet improves mAP@.5% from 33.6% to 46.7% on the VisDrone dataset. mAP@.5% on the CCTSDB2021 dataset is improved from 81.6% to 87.8%. It is shown that the model has good performance for small object detection, and the research is innovative. [ABSTRACT FROM AUTHOR]

The deep integration of digital technology and the real economy not only affects the production and operation mode of enterprises, but also becomes the promoter of service-oriented transformation and the driving force of sustainable development. Based on the text analysis method, this paper uses the data of Chinese listed manufacturing enterprises from 2011 to 2020 to study the impact of digital technology application on the service-oriented transformation and sustainable development of enterprises. It is found that digital technology application significantly improves the environmental performance and economic performance of enterprises by driving their service-oriented transformation and technological innovation, and then enhances their sustainable development. The improvement effect of digital technology application on the sustainable development of resource-based enterprises and capital-intensive enterprises is more significant. The conclusion in this paper provides micro-evidence for understanding the role of digital technology in addressing environmental issues and sustainable development. [ABSTRACT FROM AUTHOR]

Microgrids require efficient energy management systems to optimize the operation of microgrid sources and achieve economic efficiency. Bi-level energy management model is proposed in this paper to minimize the operational cost of a grid-tied microgrid under load variations and uncertainties in renewable sources while satisfying the various technical constraints. The first level is day ahead scheduling of generation units based on day ahead forecasting of renewable energy sources and load demand. In this paper, a recent meta-heuristic algorithm called Coronavirus Herd Immunity Optimizer (CHIO) is used to solve the problem of day-ahead scheduling of batteries, which is a complex constrained non-linear optimization problem, while the Lagrange multiplier method is used to determine the set-point of the Diesel Generator (DG). The second level of the proposed EMS is rescheduling and updating the set-points of sources in real-time according to the actual solar irradiance, wind speed, load, and grid tariff. In this paper, a novel real-time strategy is proposed to keep the economic operation during real-time under uncertainties. The obtained results show that the CHIO-based bi-level EMS demonstrates an optimal economic operation for a grid-connected microgrid in real-time when there are uncertainties in weather, utility tariffs, and load forecasts. [ABSTRACT FROM AUTHOR]

Artificial Intelligence (AI) systems are becoming widespread in all aspects of society, bringing benefits to the whole economy. There is a growing understanding of the potential benefits and risks of this type of technology. While the benefits are more efficient decision processes and industrial productivity, the risks may include a potential progressive disengagement of human beings in crucial aspects of decision-making. In this respect, a new perspective is emerging that aims at reconsidering the centrality of human beings while reaping the benefits of AI systems to augment rather than replace professional skills: Human-Centred AI (HCAI) is a novel framework that posits that high levels of human control do not contradict high levels of computer automation. In this paper, we investigate the two antipodes, automation vs augmentation, in the context of website usability evaluation. Specifically, we have analyzed whether the level of automation provided by a tool for semi-automatic usability evaluation can support evaluators in identifying usability problems. Three different visualizations, each one corresponding to a different level of automation, ranging from a full-automation approach to an augmentation approach, were compared in an experimental study. We found that a fully automated approach could help evaluators detect a significant number of medium and high-severity usability problems, which are the most critical in a software system; however, it also emerged that it was possible to detect more low-severity usability problems using one of the augmented approaches proposed in this paper. [ABSTRACT FROM AUTHOR]

The ever-growing threats in cybersecurity growing with the rapid development of quantum computing, necessitates the development of robust and quantum-resistant cryptographic systems. This paper introduces a novel cryptosystem, Public Key Cryptosystem based on Systematic Polar Encoding (PKC-SPE), based on the combination of systematic polar encoding and public-key cryptographic principles. The Systematic Polar Encoding (SPE), derived from the well-established field of polar codes, serves as the foundation for this proposed cryptographic scheme. Here, we have used MATLAB Software to introduce and implement the PKC-SPE Cryptosystem. The paper examines key generation, encryption, and decryption algorithms, providing insights into the adaptability and efficiency of systematic polar encoding in public-key cryptography. We assess the efficiency of the PKC-SPE Cryptosystem in three aspects: key size, computational complexity, and system implementation timings. In addition, we compare the PKC-SPE Cryptosystem with PKC-PC cryptosystem and find that it has reduced key sizes ( P r = 0.8436 kbytes). The results obtained through simulations validate the effectiveness of the proposed cryptosystem and highlighting its potential for integration into real-world communication systems. Thus, in the paradigm shift to quantum computing, the PKC-SPE cryptosystem emerges as a promising candidate to secure digital communication in the quantum computing era. [ABSTRACT FROM AUTHOR]

Optical cross-correlation is a technique that can achieve both high specificity and high sensitivity when deployed as the basis for a sensing technology. Offering significant gains in cost, size and complexity, it can also deliver significantly higher signal-to-noise ratios than traditional approaches such as absorption methodologies. In this paper, we present an optical cross-correlation technology constructed around a bespoke customised Fiber Bragg Grating (FBG). Exploiting the remarkable flexibility in design enabled by multiple aperiodic Bragg gratings, optical filters are devised that exactly mimic the absorption features of a target gas species (for this paper, acetylene C 2 H 2 ) over some waveband of interest. This grating forms the heart of the sensor architecture described here that employs modulated optical cross-correlation for gas detection. An experimental demonstration of this approach is presented, and shown to be capable of differentiating between different concentrations of the C 2 H 2 target gas. Furthermore these measurements are shown to be robust against interloper species, with minimal impact on the detection signal-to-noise arising from the introduction of contaminant gases. This represents is a significant step toward the use of customised FBGs as low-cost, compact, and highly customisable photonic devices for deployment in gas detection. [ABSTRACT FROM AUTHOR]

Previous studies reported microplastics (MPs), antibiotics, and antibiotic resistance genes (ARGs) in wastewater treatment plants (WWTPs). There is still a lack of research progress on the origin, fate, impact and hazards of MPs and ARGs in WWTPs. This paper fills a gap in this regard. In our search, we used “microplastics”, “antibiotic resistance genes”, and “wastewater treatment plant” as topic terms in Web of Science, checking the returned results for relevance by examining paper titles and abstracts. This study mainly explores the following points: (1) the origins and fate of MPs, antibiotics and ARGs in WWTPs; (2) the mechanisms of action of MPs, antibiotics and ARGs in sludge biochemical pools; (3) the impacts of MPs in WWTPs and the spread of ARGs; (4) and the harm inflicted by MPs and ARGs on the environment and human body. Contaminants in sewage sludge such as MPs, ARGs, and antibiotic-resistant bacteria enter the soil and water. Contaminants can travel through the food chain and thus reach humans, leading to increased illness, hospitalization, and even mortality. This study will enhance our understanding of the mechanisms of action among MPs, antibiotics, ARGs, and the harm they inflict on the human body. [ABSTRACT FROM AUTHOR]

In Geophysics, topographic factors are observations that can be directly measured, but they are often ignored to simplify the model. Studying the coseismic deformation caused by earthquakes helps accurately determine the epicenter's parameterization. It provides a reference for the reasonable layout of coseismic observation stations and GNSS observation stations. After the Mw7.8 earthquake in Nepal in 2015, GCMT, USGS, GFZ, CPPT, and other institutions released their epicenter parameter. However, according to their parameters, the coseismic displacements simulated by the spectral-element method are quite different from the GNSS observations. Firstly, this paper inverts the geometric parameters of the seismogenic fault with Nepal's coseismic GNSS displacement. The spectral-element method determines the source's location and depth under the heterogeneous terrain and outputs the source parameters. Among the results of many studies, the surface source is more consistent with the generation mechanism of large earthquakes. Secondly, this paper calculates the fault slip distribution of this earthquake using SDM (Steepest Descent Method) based on GNSS and InSAR data, which is divided into 1500 subfaults, and the moment tensor of each subfault is calculated. This paper investigates the distribution characteristics of the coseismic deformation field of the 2015 Mw 7.8 earthquake in Nepal under three different models. The results show that the influence of topographic factors is ~ 20%, and the influence of heterogeneous factors is ~ 10%. This paper concludes that the influence of topographic factors is much more significant than that of heterogeneous factors, and the influence of both should be addressed in coseismic deformation calculations. [ABSTRACT FROM AUTHOR]

Infrared thermal imaging is a passive non-contact detection and identification technology, which is not subject to electromagnetic infection and good concealment, is widely used in military and commercial fields. However, due to the limitations of the existing infrared imaging system mechanisms, the spatial resolution of the acquired infrared images is low and the edge details are blurred, which in turn leads to poor performance in downstream missions based on infrared images. In this paper, in order to better solve the above problems, we propose a new super-resolution reconstruction framework for infrared images, called DBFE, which extracts and retains abundant structure and textual information for robust infrared image high-resolution reconstruction with a novel structure-textual encoder module. Extensive experiment demonstrates that our proposed method achieves significantly superior contraband high-resolution reconstruction results on the multiple dataset compared to progressive methods for high resolution infrared image reconstruction, effectively proving the practicability of the method proposed in this paper. [ABSTRACT FROM AUTHOR]

The emergence of microgrids arises from the growing integration of Renewable Energy Resources (RES) and Energy Storage Systems (ESSs) into Distribution Networks (DNs). Effective integration, coordination, and control of Multiple Microgrids (MMGs) whereas navigating the complexities of energy transition within this context poses a significant challenge. The dynamic operation of MMGs is a challenge faced by the traditional distributed hierarchical control techniques. The application of Artificial Intelligence (AI) techniques is a promising way to improve the control and dynamic operation of MMGs in future smart DNs. In this paper, an innovative hybrid optimization technique that originates from Cheetah Optimization (CHO) and Particle Swarm Optimization (PSO) techniques is proposed, known as HYCHOPSO. Extensive benchmark testing validates HYCHOPSO's superiority over CHO and PSO in terms of convergence performance. The objective for this hybridization stems from the complementary strengths of CHO and PSO. CHO demonstrates rapid convergence in local search spaces, while PSO excels in global exploration. By combining these techniques, the aim is to leverage their respective advantages and enhance the algorithm's overall performance in addressing complex optimization problems. The contribution of this paper offering a unique approach to addressing optimization challenges in microgrid systems. Through a comprehensive comparative study, HYCHOPSO is evaluated against various metaheuristic optimization approaches, demonstrating superior performance, particularly in optimizing the design parameters of Proportional-Integral (PI) controllers for hierarchical control systems within microgrids. This contribution expands the repertoire of available optimization methodologies and offers practical solutions to critical challenges in microgrid optimization, enhancing the efficiency, reliability, and sustainability of microgrid operations. HYCHOPSO achieves its optimal score within fewer than 50 iterations, unlike CHO, GWO, PSO, Hybrid-GWO-PSO, and SSIA-PSO, which stabilize after around 200 iterations. Across various benchmark functions, HYCHOPSO consistently demonstrates the lowest mean values, attains scores closer to the optimal values of the benchmark functions, underscoring its robust convergence capabilities.the proposed HYCHOPSO algorithm, paired with a PI controller for distributed hierarchical control, minimizes errors and enhances system reliability during dynamic MMG operations. Using HYCHOPSO framework, an accurate power sharing, voltage/frequency stability, seamless grid-to-island transition, and smooth resynchronization are achieved. This enhances the real application's reliability, flexibility, scalability and robustness. [ABSTRACT FROM AUTHOR]

Durability is one of the technical bottlenecks restricting fuel cell electric vehicle development. As a result, significant time and resources have been invested in research related to this area worldwide. Current durability research mainly focuses on the single cell and stack levels, which is quite different from the usage scenarios of actual vehicles. There is almost no research on developing durability test cycles on the fuel cell system level. This paper proposes a universal model for developing a durability test cycle for fuel cell system based on the China automotive test cycle. Large-scale comparison tests of the fuel cell systems are conducted. After 1000 h test, the output performance degradation of three mass-produced fuel cell system is 14.49%, 9.59%, and 4.21%, respectively. The test results show that the durability test cycle proposed in this paper can effectively accelerate the durability test of the fuel cell system and evaluate the durability performance of the fuel cell system. Moreover, the methodology proposed in this paper could be used in any other test cycles such as NEDC (New European Driving Cycle), WLTC (Worldwide Harmonized Light Vehicles Test Procedure), etc. And it has comprehensive application value and are significant for reducing the cost of durability testing of fuel cell systems and promoting the industrialization of fuel cell electric vehicles. [ABSTRACT FROM AUTHOR]

Losses from catastrophic floods are driving intense efforts to increase preparedness and improve response to disastrous flood events by providing early warnings. Yet accurate flood forecasting remains a challenge due to uncertainty in modeling, calibrating, and validating a useful early warning system. This paper presents the Requisitely Simple (ReqSim) flood forecasting system that includes key variables and processes of basin hydrology and atmospheric forcing in a data-driven modeling framework. The simplicity of the modeling structure and data requirements of the system allows for customization and implementation in any medium to large rain-fed river basin globally, provided there are water level or discharge measurements at the forecast locations. The proposed system's efficacy is demonstrated in this paper through providing useful forecasts for various river basins around the world. This include 3–10-day forecasts for the Ganges and Brahmaputra rivers in South Asia, 2–3-day forecast for the Amur and Yangtze rivers in East Asia, 5–10-day forecasts for the Niger, Congo and Zambezi rivers in West and Central Africa, 6–8-day forecasts for the Danube River in Europe, 2–5-day forecasts for the Parana River in South America, and 2–7-day forecasts for the Mississippi, Missouri, Ohio, and Arkansas rivers in the USA. The study also quantifies the effect of basin size, topography, hydrometeorology, and river flow controls on forecast accuracy and lead times. Results indicate that ReqSim's forecasts perform better in river systems with moderate slopes, high flow persistence, and less flow controls. The simple structure, minimal data requirements, ease of operation, and useful operational accuracy make ReqSim an attractive option for effective real-time flood forecasting in medium and large river basins worldwide. [ABSTRACT FROM AUTHOR]

The complex networks exhibit significant heterogeneity in node connections, resulting in a few nodes playing critical roles in various scenarios, including decision-making, disease control, and population immunity. Therefore, accurately identifying these influential nodes that play crucial roles in networks is very important. Many methods have been proposed in different fields to solve this issue. This paper focuses on the different types of disassortativity existing in networks and innovatively introduces the concept of disassortativity of the node, namely, the inconsistency between the degree of a node and the degrees of its neighboring nodes, and proposes a measure of disassortativity of the node (DoN) by a step function. Furthermore, the paper analyzes and indicates that in many real-world network applications, such as online social networks, the influence of nodes within the network is often associated with disassortativity of the node and the community boundary structure of the network. Thus, the influential metric of node based on disassortativity and community structure (mDC) is proposed. Extensive experiments are conducted in synthetic and real networks, and the performance of the DoN and mDC is validated through network robustness experiments and immune experiment of disease infection. Experimental and analytical results demonstrate that compared to other state-of-the-art centrality measures, the proposed methods (DoN and mDC) exhibits superior identification performance and efficiency, particularly in non-disassortative networks and networks with clear community structures. Furthermore, we find that the DoN and mDC exhibit high stability to network noise and inaccuracies of the network data. [ABSTRACT FROM AUTHOR]

Effective forecasting of energy consumption structure is vital for China to reach its "dual carbon" objective. However, little attention has been paid to existing studies on the holistic nature and internal properties of energy consumption structure. Therefore, this paper incorporates the theory of compositional data into the study of energy consumption structure, which not only takes into account the specificity of the internal features of the structure, but also digs deeper into the relative information. Meanwhile, based on the minimization theory of squares of the Aitchison distance in the compositional data, a combined model based on the three single models, namely the metabolism grey model (MGM), back-propagation neural network (BPNN) model, and autoregressive integrated moving average (ARIMA) model, is structured in this paper. The forecast results of the energy consumption structure in 2023–2040 indicate that the future energy consumption structure of China will evolve towards a more diversified pattern, but the proportion of natural gas and non-fossil energy has yet to meet the policy goals set by the government. This paper not only suggests that compositional data from joint prediction models have a high applicability value in the energy sector, but also has some theoretical significance for adapting and improving the energy consumption structure in China. [ABSTRACT FROM AUTHOR]

City reputation is a valuable asset for the local economy and firms in the contemporary society. However, the impact of city reputation on micro-level firms has been largely overlooked by the literature. This paper uses the National Civilized City (NCC) policy in China as a quasi-natural experiment to enhance city reputation. We employ the DID approach to investigate the relationship between city reputation and corporate risk-taking. The result shows that corporate risk-taking significantly increases following the NCC policy adoption. Moreover, information asymmetry can strengthen the positive impact of city reputation on corporate risk-taking. Channel tests show that city reputation improves financial condition and decreases default risk, leading to improved risk-taking tolerance. Overall, our paper indicates that city reputation is an important mechanism to improve corporate financial performance, providing empirical evidence for local governments to pursue the NCC title. [ABSTRACT FROM AUTHOR]

This paper is focused on the diagnostics of multicopter UAV propulsion system, in which the temporary transient states occur during operation in faulty conditions (eg. not all motor phases working properly). As a diagnostic sensor, the piezo strip has been used, which is very sensitive to any vibrations of the multi-rotor frame. The paper concerns the precise location of the sensor for more effective monitoring of the propulsion system state. For this purpose, a nonlinear analysis of the vibration times series was carefully presented. The obtained non-linear time series were studied with the recurrence analysis in short time windows, which were sensitive to changes in Unmanned Aerial Vehicle motor speeds. The tests were carried out with different percentage of the pulse width modulation signal used for the operation of the brushless motor and for different locations of the piezosensor (side and top planes of the multicopter arm). In the article, it was shown that the side location of the piezosensor is more sensitive to changes in the Unmanned Aerial Vehicle propulsion system, which was studied with the Principal Component Analysis method applied for four main recurrence quantifications. The research presented proves the possibility of using nonlinear recurrence analysis for propulsion system diagnostics and helps to determine the optimal sensor location for more effective health monitoring of multicopter motor. [ABSTRACT FROM AUTHOR]

Time-domain solutions of Maxwell's equations in homogeneous and isotropic media are paramount to studying transient or broadband phenomena. However, analytical solutions are generally unavailable for practical applications, while numerical solutions are computationally intensive and require significant memory. Semi-analytical solutions (e.g., series expansion), such as those provided by the current theoretical framework of the multipole expansion, can be discouraging for practical case studies. This paper shows how sophisticated mathematical tools standard in modern physics can be leveraged to find semi-analytical solutions for arbitrary localized time-varying current distributions thanks to the novel time-domain Cartesian multipole expansion. We present the theory, apply it to a concrete application involving the imaging of an intricate current distribution, verify our results with an existing analytical approach, and compare the proposed method to a finite-difference time-domain numerical simulation. Thanks to the concept of current "pixels" introduced in this paper, we derive time-domain semi-analytical solutions of Maxwell's equations for arbitrary planar geometries. [ABSTRACT FROM AUTHOR]

With a significant number of mechanical products approaching the retirement phase, the batch recycling of discarded mechanical parts necessitates a preliminary assessment of their surface condition. However, the presence of surface rust poses a challenge to defect identification. Therefore, this paper proposes a method for detecting heavily rusted surface defects based on an improved YOLOv8n network. In the Backbone, the C2f-DBB module of re-parameterized deep feature extraction was introduced, and the attention module was designed to improve the accuracy of information extraction. In the Neck part, a Bi-Afpn multiscale feature fusion strategy is designed to facilitate information exchange between features at different scales. Finally, Focal-CIoU is employed as the bounding box loss function to enhance the network's localization performance and accuracy for defects. Experimentally, it is proved that the improved network in this paper improves the Recall, Precision, and mAP0.5 by 1.2%, 2.1%, and 1.9%, respectively, on the original basis, which is better than other network models. [ABSTRACT FROM AUTHOR]

Recent research has focused on applying blockchain technology to solve security-related problems in Internet of Things (IoT) networks. However, the inherent scalability issues of blockchain technology become apparent in the presence of a vast number of IoT devices and the substantial data generated by these networks. Therefore, in this paper, we use a lightweight consensus algorithm to cater to these problems. We propose a scalable blockchain-based framework for managing IoT data, catering to a large number of devices. This framework utilizes the Delegated Proof of Stake (DPoS) consensus algorithm to ensure enhanced performance and efficiency in resource-constrained IoT networks. DPoS being a lightweight consensus algorithm leverages a selected number of elected delegates to validate and confirm transactions, thus mitigating the performance and efficiency degradation in the blockchain-based IoT networks. In this paper, we implemented an Interplanetary File System (IPFS) for distributed storage, and Docker to evaluate the network performance in terms of throughput, latency, and resource utilization. We divided our analysis into four parts: Latency, throughput, resource utilization, and file upload time and speed in distributed storage evaluation. Our empirical findings demonstrate that our framework exhibits low latency, measuring less than 0.976 ms. The proposed technique outperforms Proof of Stake (PoS), representing a state-of-the-art consensus technique. We also demonstrate that the proposed approach is useful in IoT applications where low latency or resource efficiency is required. [ABSTRACT FROM AUTHOR]

In order to address the challenges of identifying, detecting, and tracking moving objects in video surveillance, this paper emphasizes image-based dynamic entity detection. It delves into the complexities of numerous moving objects, dense targets, and intricate backgrounds. Leveraging the You Only Look Once (YOLOv3) algorithm framework, this paper proposes improvements in image segmentation and data filtering to address these challenges. These enhancements form a novel multi-object detection algorithm based on an improved YOLOv3 framework, specifically designed for video applications. Experimental validation demonstrates the feasibility of this algorithm, with success rates exceeding 60% for videos such as "jogging", "subway", "video 1", and "video 2". Notably, the detection success rates for "jogging" and "video 1" consistently surpass 80%, indicating outstanding detection performance. Although the accuracy slightly decreases for "Bolt" and "Walking2", success rates still hover around 70%. Comparative analysis with other algorithms reveals that this method's tracking accuracy surpasses that of particle filters, Discriminative Scale Space Tracker (DSST), and Scale Adaptive Multiple Features (SAMF) algorithms, with an accuracy of 0.822. This indicates superior overall performance in target tracking. Therefore, the improved YOLOv3-based multi-object detection and tracking algorithm demonstrates robust filtering and detection capabilities in noise-resistant experiments, making it highly suitable for various detection tasks in practical applications. It can address inherent limitations such as missed detections, false positives, and imprecise localization. These improvements significantly enhance the efficiency and accuracy of target detection, providing valuable insights for researchers in the field of object detection, tracking, and recognition in video surveillance. [ABSTRACT FROM AUTHOR]

Electric vehicles (EVs) have become an attractive alternative to IC engine cars due to the increased interest in lowering the consumption of fossil fuels and pollution. This paper presents the design and simulation of a 4 kW solar power-based hybrid EV charging station. With the increasing demand for electric vehicles and the strain they pose on the electrical grid, particularly at fast and superfast charging stations, the development of sustainable and efficient charging infrastructure is crucial. The proposed hybrid charging station integrates solar power and battery energy storage to provide uninterrupted power for EVs, reducing reliance on fossil fuels and minimizing grid overload. The system operates using a three-stage charging strategy, with the PV array, battery bank, and grid electricity ensuring continuous power supply for EVs. Additionally, the system can export surplus solar energy to the grid, reducing the load demand. The paper also discusses the use of MPPT techniques, PV cell modeling, and charge controller algorithms to optimize the performance of the hybrid charging station. [ABSTRACT FROM AUTHOR]

The innovative application of Crowd Intelligent Devices (CIDS) in edge networks has garnered attention due to the rapid development of artificial intelligence and computer technology. This application offers users more reliable and low-latency computing services through computation offloading technology. However, the dynamic nature of network terminals and the limited coverage of edge servers pose challenges, such as data loss and service interruption. Furthermore, the high-speed mobility of intelligent terminals in the dynamic edge network environment further complicates the design of computation offloading and service migration strategies. To address these challenges, this paper explores the computation offloading model of cluster intelligence collaboration in a heterogeneous network environment. This model involves multiple intelligences collaborating to provide computation offloading services for terminals. To accommodate various roles, a switching strategy of split-cluster group collaboration is introduced, assigning the cluster head, the alternate cluster head, and the ordinary user are assigned to a group with different functions. Additionally, the paper formulates the optimal offloading strategy for group smart terminals as a Markov decision process, taking into account factors such as user mobility, service delay, service accuracy, and migration cost. To implement this strategy, the paper utilizes the deep reinforcement learning-based CCSMS algorithm. Simulation results demonstrate that the proposed edge network service migration strategy, rooted in groupwise cluster collaboration, effectively mitigates interruption delay and enhances service migration efficiency. [ABSTRACT FROM AUTHOR]

Programmed death-ligand 1 (PD-L1) expression is currently used in the clinic to assess eligibility for immune-checkpoint inhibitors via the tumor proportion score (TPS), but its efficacy is limited by high interobserver variability. Multiple papers have presented systems for the automatic quantification of TPS, but none report on the task of determining cell-level PD-L1 expression and often reserve their evaluation to a single PD-L1 monoclonal antibody or clinical center. In this paper, we report on a deep learning algorithm for detecting PD-L1 negative and positive tumor cells at a cellular level and evaluate it on a cell-level reference standard established by six readers on a multi-centric, multi PD-L1 assay dataset. This reference standard also provides for the first time a benchmark for computer vision algorithms. In addition, in line with other papers, we also evaluate our algorithm at slide-level by measuring the agreement between the algorithm and six pathologists on TPS quantification. We find a moderately low interobserver agreement at cell-level level (mean reader-reader F1 score = 0.68) which our algorithm sits slightly under (mean reader-AI F1 score = 0.55), especially for cases from the clinical center not included in the training set. Despite this, we find good AI-pathologist agreement on quantifying TPS compared to the interobserver agreement (mean reader-reader Cohen's kappa = 0.54, 95% CI 0.26–0.81, mean reader-AI kappa = 0.49, 95% CI 0.27—0.72). In conclusion, our deep learning algorithm demonstrates promise in detecting PD-L1 expression at a cellular level and exhibits favorable agreement with pathologists in quantifying the tumor proportion score (TPS). We publicly release our models for use via the Grand-Challenge platform. [ABSTRACT FROM AUTHOR]

Historical paper documents are susceptible to complex degradation processes, including biodeterioration, which can progressively compromise their aesthetic and structural integrity. This study analyses seventeenth century handwritten historical letters stored at the Correr Museum Library in Venice, Italy, exhibiting pronounced signs of biodeterioration. The techniques used encompassed traditional colony isolation on agar plates and proteomics analyses, employing nanoscale liquid chromatography coupled with high-resolution mass spectrometry (nano-LC–MS). Fluorescence microscopy was used for the first time in the historical paper biodeterioration context to supplement the conventional stereoscopic, optical, and scanning electron microscopic imaging techniques. This method enables the visualisation of microorganisms beyond and beneath the paper's surface through their natural intrinsic autofluorescence in a non-invasive and non-destructive way. The results demonstrate a diverse, complex, and abundant microbiota composed of coexisting fungal and bacterial species (Ascomycota, Mucoromycota, Basidiomycota, Proteobacteria, and Actinobacteria), along with mite carcasses, insects, parasites, and possibly protists. Furthermore, this study reveals certain species that were not previously documented in the biodeterioration of historical paper, including human pathogens, such as Histoplasma capsulatum, Brucella, Candida albicans, and species of Aspergillus (A. flavus, A. fumigatus, A. oryzae, A. terreus, A. niger) known to cause infections or produce mycotoxins, posing substantial risk to both artefacts and humans. [ABSTRACT FROM AUTHOR]

Layered rock slope exists widely. Because of its special slope structure, it is prone to bending deformation and toppling failure, which is a serious threat to engineering construction and safety operation. At present, the research of layered rock slope still has great innovation potential. During the construction of Wudongde Hydropower Station on Jinsha River, safety and stability problems such as slope geological structure development, face rock unloading and relaxation, and even slip and large deformation were encountered. Through field exploration, it is found that the rock and soil stratification of the slope on both sides of Wudongde Hydropower Station is highly obvious. At present, there is a lack of research on-site long-term displacement monitoring of layered rock high-steep slope, especially for layered slope in complex hydrogeology and construction environment. In order to strengthen the research on the deformation and stability of layered rock slope, this paper analyzes the measured displacement data of Wudongde hydropower station slope, and establishes three-dimensional geological finite element model with the help of numerical simulation software. The stability of the slope is calculated by combining the finite difference method and the strength reduction method. Finally, the evolution mechanism of the deformation of the layered rock slope is explained according to the geological structure characteristics. The main conclusions of this paper are as follows: the layered slope in the dam reservoir area is prone to deformation under the combined action of long-term construction disturbance and fissure water seepage, and the construction disturbance has a strong influence on the artificial excavation area below 1070 m, and the maximum rock mass deformation and surface displacement in the artificial excavation area of the slope reach 92.2 mm and 312.5 mm, respectively. However, the influence of construction disturbance on the natural mountain above 1070 m is limited, the valley deformation of the natural mountain on the left bank of the reservoir area is higher than that on the right bank, and the cumulative deformation is still less than 20 mm. The influence of seepage on the displacement of the area with higher elevation at the top of the slope is more obvious, and the influence of excavation and other disturbances on the displacement of the artificial excavation area with lower elevation is more obvious. The deformation of the river valley in the water cushion pond behind the dam increases slowly, and the change trend of the field deformation data is mostly consistent with that of the numerical calculation. The horizontal shrinkage of the mountains on both sides shows a contraction trend on the whole, and the maximum horizontal shrinkage calculated by numerical simulation is close to 20 mm, which is located at the elevation of 990 m. [ABSTRACT FROM AUTHOR]

The addition of hollow glass microsphere into composites is a method to improve mechanical properties. However, the interfacial debonding of hollow microsphere inevitably causes a decrease in the mechanical properties of the material, which ultimately leads to the failure of the composites. In the numerical simulation of such hollow particle-reinforced composites, the ordinary displacement finite element requires a large number of meshes, which undoubtedly greatly increases the computational cost. In this paper, a new VCFEM is proposed to solve this problem by establishing a two-dimensional Voronoi cell finite element model, deriving the residual energy generalized function of hollow particle-reinforced composites, and calculating the interface debonding. The simulation results are compared with the commercial software MARC, ABAQUS to verify the effectiveness of this VCFEM. The results show that this VCFEM greatly improves the computational efficiency while ensuring the accuracy. Based on this model, this paper also investigates the effect of the generation of interfacial debonding on the overall structure and the effect of different wall thickness of hollow particles on the damage of element debonding. [ABSTRACT FROM AUTHOR]

This study aims to study the pro-environmental behaviour of herders in the Sanjiangyuan region, a significant ecological security barrier. This paper selected 212 herding households in the Sanjiangyuan area as research subjects by random sampling method. By establishing a multivariate ordered logistics model to study the impact of risk perception on herding households' pro-environmental behaviour and introducing capital endowment as a moderating variable to analyse the moderating effect of capital endowment on the relationship of herding households' risk perception—pro-environmental behaviour. The study results show that herders's risk perception significantly affects their pro-environmental behaviour, in which environmental risk perception, economic risk perception and disease risk perception positively affect their pro-environmental behaviour. Capital endowment has a moderating role in the relationship between risk perception and the pro-environmental behaviour of herding households. Accordingly, this paper proposes to strengthen publicity and education, encourage herders to join cooperatives, and improve the ability of risk perception and other countermeasures. [ABSTRACT FROM AUTHOR]

When testing earthquake simulation shaking tables, it is commonly assumed that the test load, table, and actuator are integrated, which differs significantly from the actual situation and negatively impacts the accuracy of system waveform reproduction. This paper simplifies the connection between the three as a spring-damping model for simulation modeling. The effects of different load mass, different connection intrinsic frequency, different connection damping ratios, and other factors on the control performance of the system are analyzed, and based on the results of the analysis, a method to improve the effects of the connection characteristics on the performance of the system, called flexible connection reaction force compensation algorithm, is proposed. Resonance peaks caused by flexible connections reduce the effective bandwidth. To broaden the bandwidth and enhance system stability, the paper introduces a flexible connection force compensation algorithm based on a multi-parameter control algorithm to compensate for the interaction force caused by the connection characteristics. This compensation strategy expands the effective bandwidth, eliminates resonance peaks, improves the waveform correlation coefficient (CC), and reduces the root-mean-square error (RMSE). [ABSTRACT FROM AUTHOR]

Due to the uncertainty of weather conditions and the nonlinearity of high-dimensional data, as well as the need for a continuous and stable power supply to the power system, traditional regression analysis and time series forecasting methods are no longer able to meet the high accuracy requirements of today's PV power forecasting. To significantly improve the prediction accuracy of short-term PV output power, this paper proposes a short-term PV power forecasting method based on a hybrid model of temporal convolutional networks and gated recurrent units with an efficient channel attention network (TCN-ECANet-GRU) using the generated data of an Australian PV power station as the research object. First, temporal convolutional networks (TCNs) are used as spatial feature extraction layers, and an efficient channel attention network (ECANet) is embedded to enhance the feature capture capability of the convolutional network. Then, the GRU is used to extract the timing information for the final prediction. Finally, based on the experimental validation, the TCN-ECANet-GRU method generally outperformed the other baseline models in all four seasons of the year according to three performance assessment metrics: the normalized root mean square error (RMSE), normalized mean absolute error (MAE) and coefficient of determination (R2). The best RMSE, MAE and R2 reached 0.0195, 0.0128 and 99.72%, respectively, with maximum improvements of 11.32%, 8.57% and 0.38%, respectively, over those of the suboptimal model. Therefore, the model proposed in this paper is effective at improving prediction accuracy. Using the proposed method, this paper concludes with multistep predictions of 3, 6, and 9 steps, which also indicates that the proposed method significantly outperforms the other models. [ABSTRACT FROM AUTHOR]

The relentless pursuit of miniaturization and performance enhancement in electronic devices has led to a fundamental challenge in the field of circuit design and simulation-how to accurately account for the inherent stochastic nature of certain devices. While conventional deterministic models have served as indispensable tools for circuit designers, they fall short when it comes to capturing the subtle yet critical variability exhibited by many electronic components. In this paper, we present an innovative approach that transcends the limitations of traditional modeling techniques by harnessing the power of machine learning, specifically Mixture Density Networks (MDNs), to faithfully represent and simulate the stochastic behavior of electronic devices. We demonstrate our approach to model heater cryotrons, where the model is able to capture the stochastic switching dynamics observed in the experiment. Our model shows 0.82% mean absolute error for switching probability. This paper marks a significant step forward in the quest for accurate and versatile compact models, poised to drive innovation in the realm of electronic circuits. [ABSTRACT FROM AUTHOR]

High-quality biofilm carriers are crucial for the formation of biofilm, but problems such as slow biofilm growth on the carrier surface have been troubling a large number of researchers. The addition of a carrier changes the flow state in the reactor, which in turn affects the microbial attachment and the quantity of microorganisms. Also, aerobic microorganisms need to use dissolved oxygen in the water to remove water pollutants. In this paper, a novel recirculating flow carrier with a hollow cylinder structure is proposed, with a certain number of hollow inverted circular plates placed at equal distances inside. In this paper, the hydraulic residence time, aeration volume, and the spacing of the inflow plates of the recirculating flow biofilm carrier, which are three important factors affecting the hydraulic characteristics of the reactor, are first investigated. At the same time, it was compared with the common combined carrier to find the optimal operating conditions for the hydraulic characteristics. Secondly, a reactor start-up study was carried out to confirm that the new recirculating flow biofilm carrier could accelerate the biofilm growth by changing the hydraulic characteristics. The results showed that under the same conditions, the hydraulic properties of the reactor were better with the addition of the recirculating flow carrier, with an effective volume ratio of 98% and a significant reduction in short flows and dead zones. The stabilized removal of COD, NH3-N, and TN in the reactor with the addition of the recirculating flow carrier reached about 94%, 99%, and 91% respectively, at the beginning of the 15th day, which effectively proved the feasibility of the recirculating flow carrier. [ABSTRACT FROM AUTHOR]

Along with the further integration of demand management and renewable energy technology, making optimal use of energy storage devices and coordinating operation with other devices are key. The present study takes into account the current situation of power storage equipment. Based on one year of measured data, four cases are designed for a composite energy storage system (ESS). In this paper, a two-tiered optimization model is proposed and is used to optimizing the capacity of power storage devices and the yearly production of the system. Furthermore, this paper performs a comparative analysis of the performance of the four cases from the energy, environmental and economic perspectives. It is concluded that this kind of energy storage equipment can enhance the economics and environment of residential energy systems. The thermal energy storage system (TESS) has the shortest payback period (7.84 years), and the CO2 emissions are the lowest. Coupled with future price volatility and the carbon tax, the electrothermal hybrid energy storage system (HESS) has good development potential. However, the current investment cost is very high, and it will not be possible to recover this cost in 10 years. Finally, it is recommended that the cost of equipment be reduced in combination with subsidies and incentives for further promotion. The research results not only fill a gap in the study area, but also provide some suggestions for further development of industry and research on user-side energy storage. [ABSTRACT FROM AUTHOR]

Danmakus are user-generated comments that overlay on videos, enabling real-time interactions between viewers and video content. The emotional orientation of danmakus can reflect the attitudes and opinions of viewers on video segments, which can help video platforms optimize video content recommendation and evaluate users' abnormal emotion levels. Aiming at the problems of low transferability of traditional sentiment analysis methods in the danmaku domain, low accuracy of danmaku text segmentation, poor consistency of sentiment annotation, and insufficient semantic feature extraction, this paper proposes a video danmaku sentiment analysis method based on MIBE-RoBERTa-FF-BiLSTM. This paper constructs a "Bilibili Must-Watch List and Top Video Danmaku Sentiment Dataset" by ourselves, covering 10,000 positive and negative sentiment danmaku texts of 18 themes. A new word recognition algorithm based on mutual information (MI) and branch entropy (BE) is used to discover 2610 irregular network popular new words from trigrams to heptagrams in the dataset, forming a domain lexicon. The Maslow's hierarchy of needs theory is applied to guide the consistent sentiment annotation. The domain lexicon is integrated into the feature fusion layer of the RoBERTa-FF-BiLSTM model to fully learn the semantic features of word information, character information, and context information of danmaku texts and perform sentiment classification. Comparative experiments on the dataset show that the model proposed in this paper has the best comprehensive performance among the mainstream models for video danmaku text sentiment classification, with an F1 value of 94.06%, and its accuracy and robustness are also better than other models. The limitations of this paper are that the construction of the domain lexicon still requires manual participation and review, the semantic information of danmaku video content and the positive case preference are ignored. [ABSTRACT FROM AUTHOR]

Freeze–thaw failure of frozen rock slope often occurs during engineering construction and mining in cold area, which poses a great threat to engineering construction and people's life safety. The properties of rock mass in cold region will change with the periodic change of temperature, which makes it difficult to accurately evaluate the stability of slope under the action of freeze–thaw cycle by conventional methods. Based on field investigation and literature review, this paper discusses the characteristics of frozen rock mass and the failure mechanism of frozen rock slope, and gives the types and failure modes of frozen rock slope. Then, the research status of frozen rock slope is analyzed. It is pointed out that the failure of frozen rock slope is the result of thermo-hydro-mechanical (THM) coupling. It is considered that freeze–thaw cycle, rainfall infiltration and fracture propagation have significant effects on the stability of frozen rock slope, and numerical simulation is used to demonstrate. The research shows that the safety factor of frozen rock slope changes dynamically with the surface temperature, and the safety factor of slope decreases year by year with the increase of freeze–thaw cycles, and the fracture expansion will significantly reduce the safety factor. Based on the above knowledge, a time-varying evaluation method of frozen rock slope stability based on THM coupling theory is proposed. This paper can deepen scholars' understanding of rock fracture slope in cold area and promote related research work. [ABSTRACT FROM AUTHOR]

This paper presents a cutting-edge Sustainable Power Management System for Light Electric Vehicles (LEVs) using a Hybrid Energy Storage Solution (HESS) integrated with Machine Learning (ML)-enhanced control. The system's central feature is its ability to harness renewable energy sources, such as Photovoltaic (PV) panels and supercapacitors, which overcome traditional battery-dependent constraints. The proposed control algorithm orchestrates power sharing among the battery, supercapacitor, and PV sources, optimizing the utilization of available renewable energy and ensuring stringent voltage regulation of the DC bus. Notably, the ML-based control ensures precise torque and speed regulation, resulting in significantly reduced torque ripple and transient response times. In practical terms, the system maintains the DC bus voltage within a mere 2.7% deviation from the nominal value under various operating conditions, a substantial improvement over existing systems. Furthermore, the supercapacitor excels at managing rapid variations in load power, while the battery adjusts smoothly to meet the demands. Simulation results confirm the system's robust performance. The HESS effectively maintains voltage stability, even under the most challenging conditions. Additionally, its torque response is exceptionally robust, with negligible steady-state torque ripple and fast transient response times. The system also handles speed reversal commands efficiently, a vital feature for real-world applications. By showcasing these capabilities, the paper lays the groundwork for a more sustainable and efficient future for LEVs, suggesting pathways for scalable and advanced electric mobility solutions. [ABSTRACT FROM AUTHOR]