Search

Although atmospheric CO2 concentrations collected by satellites play a crucial role in understanding global greenhouse gases, the sparse geographic distribution greatly affects their widespread application. In this paper, a hybrid CNN and spatiotemporal Kriging (CNN-STK) model is proposed to generate a monthly spatiotemporal continuous XCO2 dataset over China at 0.25° grid-scale from 2015 to 2020, utilizing OCO-2 XCO2 and geographic covariates. The validations against observation samples, CAMS XCO2 and TCCON measurements indicate the CNN-STK model is effective, robust, and reliable with high accuracy (validation set metrics: R2 = 0.936, RMSE = 1.3 ppm, MAE = 0.946 ppm; compared with TCCON: R2 = 0.954, RMSE = 0.898 ppm and MAE = 0.741 ppm). The accuracy of CNN-STK XCO2 exhibits spatial inhomogeneity, with higher accuracy in northern China during spring, autumn, and winter and lower accuracy in northeast China during summer. XCO2 in low-value-clustering areas is notably influenced by biological activities. Moreover, relatively high uncertainties are observed in the Qinghai-Tibet Plateau and Sichuan Basin. This study innovatively integrates deep learning with the geostatistical method, providing a stable and cost-effective approach for other countries and regions to obtain regional scales of atmospheric CO2 concentrations, thereby supporting policy formulation and actions to address climate change. [ABSTRACT FROM AUTHOR]

Old landslides in the Loess Plateau, Northwest China usually occurred over a relatively long period, and their sizes are usually smaller compared to old landslides in the alpine valley areas of Sichuan, Yunnan, and Southeast Tibet. These landslide areas may have been changed either partially or greatly, and they are usually covered with vegetation and similar to their surrounding environment. Therefore, it is a great challenge to detect them using high-resolution remote sensing images with only orthophoto view. This paper proposes the optimal-view and multi-view strategic hybrid deep learning (OMV-HDL) method for old loess landslide detection. First, the optimal-view dataset in the Yan'an area (YA-OP) was established to solve the problem of insufficient optical features in orthophoto images. Second, in order to make the process of interpretation more labor-saving, the optimal-view and multi-view (OMV) strategy was proposed. Third, hybrid deep learning with weighted boxes fusion (HDL-WBF) was proposed to detect old loess landslides effectively. The experimental results with the constructed optimal-view dataset and multi-view data show that the proposed method has excellent performance among the compared methods—the F1 score and AP (mean) of the proposed method were improved by about 30% compared with the single detection model using traditional orthophoto-view data—and that it has good detection performance on multi-view data with the recall of 81.4%. [ABSTRACT FROM AUTHOR]

Forest fires have frequently occurred and caused great harm to people's lives. Many researchers use machine learning techniques to predict forest fires by considering spatio-temporal data features. However, it is difficult to efficiently obtain the features from large-scale, multi-source, heterogeneous data. There is a lack of a method that can effectively extract features required by machine learning-based forest fire predictions from multi-source spatio-temporal data. This paper proposes a forest fire prediction method that integrates spatio-temporal knowledge graphs and machine learning models. This method can fuse multi-source heterogeneous spatio-temporal forest fire data by constructing a forest fire semantic ontology and a knowledge graph-based spatio-temporal framework. This paper defines the domain expertise of forest fire analysis as the semantic rules of the knowledge graph. This paper proposes a rule-based reasoning method to obtain the corresponding data for the specific machine learning-based forest fire prediction methods, which are dedicated to tackling the problem with real-time prediction scenarios. This paper performs experiments regarding forest fire predictions based on real-world data in the experimental areas Xichang and Yanyuan in Sichuan province. The results show that the proposed method is beneficial for the fusion of multi-source spatio-temporal data and highly improves the prediction performance in real forest fire prediction scenarios. [ABSTRACT FROM AUTHOR]

Several possible lithosphere–atmosphere–ionosphere coupling mechanisms before earthquake occurrence are presented in the literature. They are described by several models with different interaction channels (e.g., electromagnetic, mechanics, chemical, thermal), sometimes in conflict with each other. In this paper, we search for anomalies six months before the Lushan (China) 2013 earthquake in the three geo-layers looking for a possible view of the couplings and testing if one or another is more reliable to describe the observations. The Lushan earthquake occurred in China's Sichuan province on 20 April 2013, with a magnitude of Mw = 6.7. Despite the moderate magnitude of the event, it caused concern because its source was localized on the southwest side of the same fault that produced the catastrophic Wenchuan event in 2008. This paper applies a geophysical multi-layer approach to search for possible pre-earthquake anomalies in the lithosphere, atmosphere, and ionosphere. In detail, six main increases in the accumulated seismic stress were depicted. Anomalous geomagnetic pulsations were recorded in the Chengdu observatory, sometimes following the increased stress. Atmosphere status and composition were found to be anomalous in several periods before the earthquake, and, spatially, the anomalies seem to appear firstly far from the upcoming earthquakes and later approaching the Longmenshan fault where the Lushan earthquakes nucleated. The Formosat-3 data identified interesting anomalies in the altitude or electron content of the ionospheric F2 peak in correspondence with seismic and atmospheric anomalies 130 days before the earthquake. In addition, the total electron content showed high anomalous values from 12 to 6 days before the earthquake. We compared the anomalies and tried to explain their correspondences in different geo-layers by the lithosphere–atmosphere–ionosphere coupling models. In particular, we identified three possible couplings with different mechanisms: a first, about 130 days before the earthquake, with a fast (order of one day) propagation delay; a second, about 40 days before the earthquake occurrence, with a propagation delay of few days and a third from 2.5 weeks until one week before the event. Such evidence suggests that the geo-layers could interact with different channels (pure electromagnetic or a chain of physical-chemical processes) with specific propagation delays. Such results support the understanding of the preparation for medium and large earthquakes globally, which is necessary (although not sufficient) knowledge in order to mitigate their impact on human life. [ABSTRACT FROM AUTHOR]

Landslides are common natural disasters that cause serious damage to ecosystems and human societies. To effectively prevent and mitigate these disasters, an accurate assessment of landslide hazards is necessary. However, most traditional landslide hazard assessment methods rely on static assessment factors while ignoring the dynamic changes in landslides, which may lead to false-positive errors in the assessment results. This paper presents a novel landslide hazard assessment method for the Zagunao River basin, China. In this study, an updated landslide inventory was obtained for the Zagunao River basin using data from interferometric synthetic aperture radar (InSAR) and optical images. Based on this inventory, a landslide susceptibility map was developed using a random forest algorithm. Finally, an evaluation matrix was created by combining the results of deformation rates from both ascending and descending data to establish a hazard level that considers surface deformation. The method presented in this study can reflect recent landslide hazards in the region and produce dynamic assessments of regional landslide hazards. It provides a basis for the government to identify and manage high-risk areas. [ABSTRACT FROM AUTHOR]

The rapid and accurate extraction of wide-area coseismic landslide locations is critical in earthquake emergencies. At present, the extraction of coseismic landslides is mainly based on post-earthquake site investigation or the interpretation of human–computer interactions based on remote sensing images. However, the identification efficiency is low, which seriously delays the earthquake emergency response. On the basis of the available multisource and multiscale remote sensing data, numerous studies have been carried out on the methods of coseismic landslide extraction, such as pixel analysis, object-oriented analysis, change detection, and machine learning. However, the effectiveness of coseismic landslide extraction was low in wide areas with complex topographic and geomorphic backgrounds. Therefore, this paper offers a comprehensive study of the factors influencing coseismic landslides and researches rapid and accurate wide-area coseismic landslide extraction methods with multisource remote sensing and geoscience technology. These techniques include digital elevation modeling (DEM) and its derived slopes and aspects. An embedded multichannel spectral–topographic feature fusion model for coseismic landslide extraction based on DeepLab V3+ is proposed, and a knowledge-enhanced deep learning information extraction method integrating geological knowledge is formed. Using the Jiuzhaigou Ms7.0 earthquake (seismic intensity VIII) in Sichuan Province, China, a comparison of landslide extraction models and strategies is carried out. The results show that the model proposed in this paper achieves the best balance in the accuracy and efficiency of wide-area extractions. Using multiple feature data of coseismic landslides, the problem of mixed pixels is solved. The rate of the misidentification of landslides as clouds, snow, buildings, and roads is significantly lower than in other methods. The identified landslide boundaries are smoother and more accurate, and the connectivity is better. Compared with other methods, ours can more accurately eliminate landslides not triggered by the Jiuzhaigou earthquake. While using the image block strategy to ensure extraction efficiency, it also improves the extraction accuracy of wide-area coseismic landslides in complex backgrounds. [ABSTRACT FROM AUTHOR]

Ground-based synthetic aperture radar interferometry (GB-InSAR) has the characteristics of high precision, high temporal resolution, and high spatial resolution, and is widely used in highwall deformation monitoring. The traditional GB-InSAR real-time processing method is to process the whole data set or group in time sequence. This type of method takes up a lot of computer memory, has low efficiency, cannot meet the timeliness of slope monitoring, and cannot perform deformation prediction and disaster warning forecasting. In response to this problem, this paper proposes a GB-InSAR time series processing method based on the LSTM (long short-term memory) model. First, according to the early monitoring data of GBSAR equipment, the time series InSAR method (PS-InSAR, SBAS, etc.) is used to obtain the initial deformation information. According to the deformation calculated in the previous stage and the atmospheric environmental parameters monitored, the LSTM model is used to predict the deformation and atmospheric delay at the next time. The phase is removed from the interference phase, and finally the residual phase is unwrapped using the spatial domain unwrapping algorithm to solve the residual deformation. The predicted deformation and the residual deformation are added to obtain the deformation amount at the current moment. This method only needs to process the difference map at the current moment, which greatly saves time series processing time and can realize the prediction of deformation variables. The reliability of the proposed method is verified by ground-based SAR monitoring data of the Guangyuan landslide in Sichuan Province. [ABSTRACT FROM AUTHOR]

Based on various velocity fields from Global Positioning System (GPS) data over nearly 20 years in the Sichuan–Yunnan region, this paper calculated the strain rate field and its spatiotemporal characteristics by using an improved least squares collocation method. We evaluated the calculated strain field by extensively discussing the impact of non-tectonic factors on the calculation. Subsequently, we described the present-day strain rate features and their spatiotemporal variations. The results indicate the necessity of considering the influence of non-tectonic factors when calculating the strain rate field by using GPS velocity data. Widespread strain accumulation is observed in the Sichuan–Yunnan region, and significant second strain rate invariant with an average value of 33.1 nanostrain/yr primarily occurs along the eastern boundary faults of the Sichuan–Yunnan rhomboid block, specifically the Xianshuihe–Anninghe–Zemuhe–Xiaojiang fault systems. These fault systems also demarcate the zones with negative and positive dilation strain. According to the spatiotemporal variations of strain rate fields, the northern and southern segments of the Xianshuihe Fault, the Anninghe Fault and its eastern adjacent faults, and the Xiaojiang Fault are undergoing intensifying strain. Consequently, these zones should be paid more attention due to their relatively higher seismic risk in the Sichuan–Yunnan region. [ABSTRACT FROM AUTHOR]

Vegetation net primary productivity (VNPP) is the main factor in ecosystem carbon sink function and regulation of environmental processes. However, NPP data products have data missing in some areas, which affects the availability and overall accuracy level of data. Therefore, we adopted the Factor Analysis Backpropagation neural network model (FA-BP model) to acquire a high-accuracy and high-reliability NPP result without missing or empty areas by using a series of easily accessible datasets, such as meteorological data and remote sensing data. We selected the western Sichuan region as the study area and carried out a VNPP time series estimation from 2000 to 2016. Comparative simulations also verify the accuracy of the time series estimation results: The Pearson correlation r of VNPP prediction results ranged from 0.807 to 0.917, the mean absolute error ranged from 29.1 to 38.9, the root mean square error was between 37.3 and 51.8, and the mean relative error varies from 0.10 to 0.14. Further analysis shows that the spatial pattern of estimated VNPP during the past 17 years in western Sichuan shows a decreasing trend from southeast to northwest. Besides, the VNPP time series is generally on an upward trend in this period. The increasing and decreasing areas of VNPP values in the study area accounted for 81.42% and 18.58%, respectively. Moreover, we find that temperature dominates the change of VNPP in the whole western Sichuan region. The data processing method and experimental results presented in this paper can provide a reference for accurately acquiring VNPP and related studies on natural resources and climate change. [ABSTRACT FROM AUTHOR]

For emergency rescue and damage assessment after an earthquake, quick detection of seismic landslides in the affected areas is crucial. The purpose of this study is to quickly determine the extent and size of post-earthquake seismic landslides using a small amount of post-earthquake seismic landslide imagery data. This information will serve as a foundation for emergency rescue efforts, disaster estimation, and other actions. In this study, Wenchuan County, Sichuan Province, China's 2008 post-quake Unmanned Air Vehicle (UAV) remote sensing images are used as the data source. ResNet-50, ResNet-101, and Swin Transformer are used as the backbone networks of Mask R-CNN to train and identify seismic landslides in post-quake UAV images. The training samples are then augmented by data augmentation methods, and transfer learning methods are used to reduce the training time required and enhance the generalization of the model. Finally, transfer learning was used to apply the model to seismic landslide imagery from Haiti after the earthquake that was not calibrated. With Precision and F1 scores of 0.9328 and 0.9025, respectively, the results demonstrate that Swin Transformer performs better as a backbone network than the original Mask R-CNN, YOLOv5, and Faster R-CNN. In Haiti's post-earthquake images, the improved model performs significantly better than the original model in terms of accuracy and recognition. The model for identifying post-earthquake seismic landslides developed in this paper has good generalizability and transferability as well as good application potential in emergency responses to earthquake disasters, which can offer strong support for post-earthquake emergency rescue and disaster assessment. [ABSTRACT FROM AUTHOR]

Wide area landslide detection is a major international research hotspot in the field of geological hazards, and the integration of multi-temporal optical satellite images and spaceborne interferometric synthetic aperture radar (InSAR) appears to be an effective way to realize this. In this paper, a technical framework is presented for wide area landslide detection: (i) multi-temporal satellite optical images are used to detect landslides with distinguishable geomorphological features; (ii) Generic Atmospheric Correction Online Service (GACOS) assisted InSAR stacking is employed to generate annual surface displacement rate maps in radar line of sight using satellite SAR images from both ascending and descending tracks, which are in turn utilized to automatically detect active landslides from ground motion using hotspot analysis, and (iii) the distribution characteristics of the detected landslides are investigated by examining their relationships with topographic and hydrological factors. Three expressways in Sichuan Province, China—namely the Yakang (Ya'an-Kangding), Yaxi (Ya'an-Xichang), and Lushi (Luding-Shimian) expressways—and their surrounding regions (a total area of approximately 20,000 square kilometers) were chosen as the study area. A total of 413 landslides were detected, among which 320 were detected using multi-temporal satellite optical images, and 109 were detected using GACOS-assisted InSAR stacking. It should be noted that only 16 landslides were detected by both approaches; these landslides all exhibited not only obvious geomorphological features but also ground motion. A statistical analysis of the topographic and hydrological factors shows that of the detected landslides: 81% are distributed at elevations of 1000–2500 m, over 60% lie within the elevation range of 100~400 m, and 90% present with medium and steep slopes (20°~45°), and 80% are located within areas seeing an annual rainfall of 950~1050 mm. Nine landslides were found to pose potential safety hazards to the expressways. The research findings in this paper have directly benefitted the Sichuan expressways; equally important, it is believed that the technical framework presented in this paper will provide guidance for hazard mitigation and the prevention of transportation hazards in the future. [ABSTRACT FROM AUTHOR]

On 5 September 2022, an Ms6.8 magnitude earthquake occurred in Luding County, Sichuan Province, China. Based on Sentinel-1 SAR images, this paper uses the D-InSAR approach to obtain the displacement field of the earthquake, invert the coseismic sliding distribution, and then calculate the static coulomb stress changes of the coseismic deformation on the aftershock distribution and surrounding faults. Further, the seismic structure is analyzed and discussed. The InSAR coseismic deformation field demonstrates that the maximum LoS displacement of the surface deformation caused by the Luding earthquake is about 15 cm. The Luding Ms 6.8 earthquake is dominated by the Moxi fault, which is a left-lateral strike-slip fault that ruptures along the NNW-SSE trend at about 160.3°, and the dip is 81°. The fault depth is mainly 5~15 km, the maximum sliding amount is about 174.8 cm, and the corresponding depth is 8.5 km. The seismic moment tensor obtained by inversion is 1.06 × 1019 Nm, Mw = 6.65. The Coulomb stress generated by the Luding earthquake on the northern end of the Anninghe fault zone exceeded the trigger threshold. The risk of the Anninghe fault's future earthquake was greater, and continuous monitoring and risk assessment were required. [ABSTRACT FROM AUTHOR]

The mountainous area of southwest China is characterized by significant topography and complex geological conditions, which pose great challenges to the airport's site selection, construction, and safe operation. Suining Anju Airport, one of the key projects under construction in southwest China, is essential in alleviating and dredging the air passenger flow in Sichuan Province. Because the overlying quaternary strata's physical and mechanical properties, thickness, and distribution range are fairly different in the longitudinal and transverse directions, the Anju Airport's foundation in the hilly area has typical inhomogeneity. Large-scale excavation and filling pose a challenge to the ground stability of the airport. To comprehensively monitor Anju Airport's uneven ground subsidence during the construction period, this paper selected SAR image data collected by the Sentinel-1A satellite from May 2018 to June 2021 to extract time-series ground subsidence measurements based on the SBAS-InSAR method. Furthermore, based on the simulation of roadbed filling in the airport's parallel slide fill area, the dynamic evolution analysis of soil stress field and internal subsidence caused by roadbed filling activities was carried out to further reveal the occurrence mechanism of ground subsidence. The monitoring results show that the subsidence centers of Anju Airport are mainly distributed in the filling areas, and the average annual subsidence is −20~−75 mm/yr from May 2018 to June 2021. Comparative analysis with in situ data indicates that the RMSE of InSAR monitoring results was ±6.12 mm. The numerical simulation shows that the subsidence of the airport parallel slide is mainly caused by a load of subgrade filling body and the compression of its weight. The results of this study can provide reference methodology and data support for the construction and future safe operation of Suining Anju Airport. [ABSTRACT FROM AUTHOR]

Cultivated land resources are crucial to food security and economic development. Exploring the spatiotemporal pattern of cultivated land non-agriculturalization and its drivers is a prerequisite for cultivated land conservation. This paper used GlobeLand30 data to reveal the spatial and temporal pattern, the shift of the gravity center and the drivers of cultivated land non-agriculturalization by employing spatial analysis, gravity center model and the geographical detector model. The results show a dramatic increase in the non-agriculturalization of cultivated land in the period of 2010–2020 compared to 2000–2010. Spatially, the cultivated land non-agriculturalization mainly occurred in areas with high urbanization levels, such as eastern Sichuan Province and western Chongqing Municipality, while the cultivated land non-agriculturalization in other areas was small-scale and spatially scattered. Furthermore, the speed of cultivated land non-agriculturalization showed spatial unevenness, and the gravity center of cultivated land non-agriculturalization shifted towards the northeast at a distance of 123.21 km. The cultivated land non-agriculturalization was affected by GDP per capita, population density, GDP per unit of land and total retail sales of social consumer goods. The key drivers for the cultivated land non-agriculturalization in the study area were the continuous expansion of urban space and the large-scale cultivation of economic fruit trees. The government should promote small-scale machinery suitable for agricultural cultivation in the mountainous and hilly areas of Southwest China, and appropriately develop economic fruit groves and livestock farming to reduce the phenomenon of cultivated land non-foodization. [ABSTRACT FROM AUTHOR]

In recent years, the number of geological disasters in Sichuan Province has significantly increased due to the influence of earthquakes and extreme climate, as well as the disturbance to the geological environment by human activities. Thus, geological disaster monitoring is particularly important, which can provide some scientific basis for disaster prevention and reduction. In this paper, the interferometric synthetic aperture radar (InSAR) technology was introduced to monitor potential geological hazards, taking parts of Dujiangyan City, Wenchuan County, and Mao County in Sichuan Province, China as examples. Firstly, the data such as Sentinel-1A Terrain Observation with Progressive Scans (TOPS) Synthetic Aperture Radar (SAR) images and Precision Orbit Determination (POD) precise orbit ephemerides from 2018 to 2020, high-resolution optical satellite images and Digital Elevation Model (DEM) were collected. Secondly, the Differential InSAR (D-InSAR), Persistent Scatterer InSAR (PS-InSAR), Small Baseline Subset InSAR (SBAS-InSAR), Offset-Tracking, and Distributed Scatterer InSAR (DS-InSAR) algorithms were used to invert the surface deformation of the study area. Thirdly, according to the deformation results obtained by experiments, we used GF-1 and GF-2 optical images as a reference and combine the experimental results of InSAR algorithms to delineate the areas affected by geological disasters. A total of 49 geological disaster areas were obtained, mainly including landslides, collapses, and debris flow. Through field verification, the overall accuracy rate of InSAR deformation monitoring achieved 69.23%, and the accuracy rate of new potential hazards monitoring reached 63.64%. Among all InSAR methods, the DS-InSAR method outperformed and monitored the geological disaster areas well. Finally, the study area was divided into three elevation intervals and the applicability of different InSAR algorithms in different elevation intervals was discussed. [ABSTRACT FROM AUTHOR]

The southwest mountainous area of China is one of the areas with the most landslides in the world. In this paper, we used Ya'an City and Garzê Tibetan Autonomous Prefecture in Sichuan Province as the research areas to explore the identification application effects of large-area potential landslides using synthetic aperture radar (SAR) data with different wavelength types (Sentinel-1, ALOS-2), different processing methods (SBAS-InSAR, Stacking-InSAR), and different geological environmental conditions. The results show the following: (1) The effect of identifying landslides with different slope directions is largely affected by the satellite orbit direction; when we identify landslide hazards across a large area, the joint monitoring mode of ascending and descending orbit data is required. (2) The period of monitoring affects the identification effect of potential landslides when landslide identification is carried out in southwestern China; the InSAR monitoring period is recommended to be more than 2 years. (3) In different geological environmental regions, SBAS technology and Stacking technology have their own advantages; Stacking technology identifies more potential landslides, and SBAS technology identifies potential landslides with higher accuracy; (4) the degree of vegetation coverage has a great impact on the landslide identification effect of different SAR data sources. In low-density vegetation coverage areas, the landslide identification result using Sentinel-1 data seems to be better than the result using ALOS-2 data. In high-density vegetation coverage areas, the landslide identification result using ALOS-2 data is better than that using Sentinel-1 data. [ABSTRACT FROM AUTHOR]

SAR tomography (TomoSAR) extends SAR interferometry (InSAR) to image a complex 3D scene with multiple scatterers within the same SAR cell. The phase calibration method and the super-resolution reconstruction method play a crucial role in 3D TomoSAR imaging from multi-baseline SAR stacks, and they both influence the accuracy of the 3D SAR tomographic imaging results. This paper presents a systematic processing method for 3D SAR tomography imaging. Moreover, with the newly released TanDEM-X 12 m DEM, this study proposes a new phase calibration method based on SAR InSAR and DEM error estimation with the super-resolution reconstruction compressive sensing (CS) method for 3D TomoSAR imaging using COSMO-SkyMed Spaceborne SAR data. The test, fieldwork, and results validation were executed at Zipingpu Dam, Dujiangyan, Sichuan, China. After processing, the 1 m resolution TomoSAR elevation extraction results were obtained. Against the terrestrial Lidar 'truth' data, the elevation results were shown to have an accuracy of 0.25 ± 1.04 m and a RMSE of 1.07 m in the dam area. The results and their subsequent validation demonstrate that the X band data using the CS method are not suitable for forest structure reconstruction, but are fit for purpose for the elevation extraction of manufactured facilities including buildings in the urban area. [ABSTRACT FROM AUTHOR]

Seismic landslides are the most common and highly destructive earthquake-triggered geological hazards. They are large in scale and occur simultaneously in many places. Therefore, obtaining landslide information quickly after an earthquake is the key to disaster mitigation and relief. The survey results show that most of the landslide-information extraction methods involve too much manual participation, resulting in a low degree of automation and the inability to provide effective information for earthquake rescue in time. In order to solve the abovementioned problems and improve the efficiency of landslide identification, this paper proposes an automatic landslide identification method named improved U-Net model. The intelligent extraction of post-earthquake landslide information is realized through the automatic extraction of hierarchical features. The main innovations of this paper include the following: (1) On the basis of the three RGB bands, three new bands, DSM, slope, and aspect, with spatial information are added, and the number of feature parameters of the training samples is increased. (2) The U-Net model structure is rebuilt by adding residual learning units during the up-sampling and down-sampling processes, to solve the problem that the traditional U-Net model cannot fully extract the characteristics of the six-channel landslide for its shallow structure. At the end of the paper, the new method is used in Jiuzhaigou County, Sichuan Province, China. The results show that the accuracy of the new method is 91.3%, which is 13.8% higher than the traditional U-Net model. It is proved that the new method is effective and feasible for the automatic extraction of post-earthquake landslides. [ABSTRACT FROM AUTHOR]

Forests are vital for terrestrial ecosystems, providing crucial functions like carbon sequestration and water conservation. In the Yellow River Basin, where 70% of forest coverage is concentrated in the middle reaches encompassing Sichuan, Shaanxi, and Shanxi provinces, there exists significant potential for coal production, with nine planned coal bases. This study centered on Jincheng City, Shanxi Province, a representative coal mining area in the Yellow River Basin, and combined the MSPA analysis method and MCR model to generate the five-period forest ecological network of Jincheng City from 1985 to 2022 under the background of coal mining and calculate the degree centrality, closeness centrality, betweenness centrality, and eigenvector centrality; the correlation between the four centralities and carbon sequestration ability is further explored. Simultaneously, employing the RAND-ESU algorithm for motif identification within forest ecological networks, this study integrates the ecological policies of the research area with the specific conditions of the coal mining region to optimize the forest ecological network in Jincheng City. Findings reveal the following. (1) Forest ecological spatial networks: Forest ecological networks exhibit robust overall ecological connectivity in the study area, with potential ecological corridors spanning the region. However, certain areas with high ecological resistance hinder connectivity between key forest ecological nodes under the background of coal mining. (2) Correlation between topological indices and carbon sequestration ecological services: From 1985 to 2022, the carbon sequestration capacity of Jincheng City's forest source areas increased year by year, and significant positive correlations were observed between degree centrality, betweenness centrality, eigenvector centrality with carbon sequestration ecological services, indicating a strengthening trend over time. (3) Motif Recognition and Ecological Network Optimization: During the study, four types of motifs were identified in the forest ecological network of Jincheng City based on the number of nodes and their connections using the RAND-ESU network motif algorithm. These motifs are 3a, 4a, 4b, and 4d (where the number represents the number of nodes and the letter represents the connection type). Among these, motifs 3a and 4b play a crucial role. Based on these motifs and practical considerations, network optimization was performed on the existing ecological source areas to enhance the robustness of the forest ecological network. [ABSTRACT FROM AUTHOR]

In recent years, the rapid expansion and development of the shale gas industry in the Sichuan Basin has coincided with a series of unexpected moderate-sized earthquakes. Given that the Sichuan Basin is situated within a stable interior block, the focal mechanism of the 2019 earthquake sequence (ML4.7, ML5.4, and ML5.2) in the Weiyuan-Rongxian area remains a subject of debate. In this study, we propose a joint InSAR- and PCA- based inversion method utilizing the distributed Mogi model to investigate the spatial-temporal characteristics of a gas reservoir and evaluate the induced Coulomb stress change. The surface deformation derived from Sentinel-1 data between 2015 and 2021 was consistent with the spatial distribution of production wells, and it correlated with the temporal changes in reservoir volume associated with the shale gas operating process. The Coulomb stress loading on the regional faults suggests that human activities associated with shale gas operation likely triggered the three moderate earthquakes. Furthermore, our results indicate Coulomb stress loadings of 10 kPa, 15 kPa, 5 kPa, 3 kPa, and 87 kPa on the Dongxingchang fault, Gaoqiao fault, Dayaokou fault, Niujingao fault, and Lijiachang fold, respectively. Consequently, fluid injection and extraction during shale gas development could be contributing to the elevated seismic activity in the Weiyuan-Rongxian area. [ABSTRACT FROM AUTHOR]

Tomographic Synthetic Aperture Radar (TomoSAR) is a breakthrough of the traditional SAR, which has the three-dimentional (3D) observation ability of layover scenes such as buildings and high mountains. As an advanced system, the airborne array TomoSAR can effectively avoid temporal de-correlation caused by long revisit time, which has great application in high-precision mountain surveying and mapping. The 3D reconstruction using TomoSAR has mainly focused on low targets, while there are few literatures on 3D mountain reconstruction. Due to the layover phenomenon, surveying in high mountain areas remains a difficult task. Consequently, it is meaningful to carry out the research on 3D mountain reconstruction using the airborne array TomoSAR. However, the original TomoSAR mountain point cloud faces the problem of elevation ambiguity. Furthermore, for mountains with complex terrain, the points located in different elevation periods may intersect. This phenomenon increases the difficulty of solving the problem. In this paper, a novel elevation ambiguity resolution method is proposed. First, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Gaussian Mixture Model (GMM) are combined for point cloud segmentation. The former ensures coarse segmentation based on density, and the latter allows fine segmentation of the abnormal categories caused by intersection. Subsequently, the segmentation results are reorganized in the elevation direction to reconstruct all possible point clouds. Finally, the real point cloud can be extracted automatically under the constraints of the boundary and elevation continuity. The performance of the proposed method is demonstrated by simulations and experiments. Based on the airborne array TomoSAR experiment in Leshan City, Sichuan Province, China in 2019, the 3D model of the surveyed mountain is presented. Moreover, three kinds of external data are applied to fully verify the validity of this method. [ABSTRACT FROM AUTHOR]

The aerosol–cloud–precipitation correlation has been a significant scientific topic, primarily due to its remarkable uncertainty. However, the possible modulation of aerosol on the precipitation capacity of clouds has received limited attention. In this study, we utilized multi-source data on aerosol, cloud properties, precipitation, and meteorological factors to investigate the impact of aerosols on precipitation efficiency (PE) in the Sichuan Basin (SCB) and Yun-nan-Guizhou Plateau (YGP), where the differences between terrain and meteorological environment conditions were prominent. In the two study regions, there were significant negative correlations between the aerosol index (AI) and PE in spring, especially in the YGP, while the correlations between the AI and PE in other seasons were not as prominent as in spring. In spring, aerosol significantly inhibited both the liquid water path (LWP) and the ice water path (IWP) in the YGP, but negatively correlated with the IWP and had no significant relationship with the LWP in the SCB. Aerosol inhibited precipitation in the two regions mainly by reducing cloud droplet effective radius, indicating that warm clouds contributed more to precipitation in spring. The suppressive impact of aerosols on precipitation serving as the numerator of PE is greater than that of the cloud water path as the denominator of PE, resulting in a negative correlation between aerosol and PE. The AI–PE relationship is significantly dependent on meteorological conditions in the YGP, but not in the SCB, which may be related to the perennial cloud cover and stable atmosphere in the SCB. In the future, as air quality continues to improve, precipitation efficiency may increase due to the decrease in aerosol concentration, and of course, the spatio-temporal heterogeneity of the aerosol–cloud–precipitation relationship may become more significant. [ABSTRACT FROM AUTHOR]

Accurate and complete digital elevation models (DEMs) play an important fundamental role in geospatial analysis, supporting various engineering applications, human activities, and scientific research. Interferometric synthetic aperture radar (InSAR) plays an increasingly important role in DEM generation. Nonetheless, owing to its inherent characteristics, gaps often appear in regions marked by significant topographical fluctuations, necessitating an extra void-filling process. Traditional void-filling methods have operated directly on preexisting data, succeeding in relatively flat terrain. When facing mountainous regions, there will always be gross errors in elevation values. Regrettably, conventional methods have often disregarded this vital consideration. To this end, this research proposes a DEM void-filling method based on incorporating elevation outlier detection. It accounts for the detection and removal of elevation outliers, thereby mitigating the shortcomings of existing methods and ensuring robust DEM restoration in mountainous terrains. Experiments were conducted to validate the method applicability using TanDEM-X data from Sichuan, China, Hebei, China, and Oregon, America. The results underscore the superiority of the proposed method. Three traditional methods are selected for comparison. The proposed method has different degrees of improvement in filling accuracy, depending on the void status of the local terrain. Compared with the delta surface fill (DSF) method, the root mean squared error (RMSE) of the filling results has improved by 7.87% to 51.87%. The qualitative and quantitative experiments demonstrate that the proposed method is promising for large-scale DEM void-filling tasks. [ABSTRACT FROM AUTHOR]

The region near Dujiangyan City and Wenchuan County, Sichuan China, including significant giant panda habitats, was severely impacted by the Wenchuan earthquake. Largearea landslides occurred and seriously threatened the lives of people and giant pandas. In this paper, we report the development of an enhanced multi-temporal interferometric synthetic aperture radar (MTInSAR) methodology to monitor potential post-seismic landslides by analyzing coherent scatterers (CS) and distributed scatterers (DS) points extracted from multi-temporal L-band ALOS/PALSAR data in an integrated manner. Through the integration of phase optimization and mitigation of the orbit and topography-related phase errors, surface deformations in the study area were derived: the rates in the line of sight (LOS) direction ranged from -7 to 1.5 cm/a. Dozens of potential landslides, distributed mainly along the Minjiang River, Longmenshan Fault, and in other the high-altitude areas were detected. These findings matched the distribution of previous landslides. InSAR-derived results demonstrated that some previous landslides were still active; many unstable slopes have developed, and there are significant probabilities of future massive failures. The impact of landslides on the giant panda habitat, however ranged from low to moderate, would continue to be a concern for conservationists for some time in the future. [ABSTRACT FROM AUTHOR]

Landslide susceptibility assessment (LSA) is an essential tool for landslide hazard warning. The selection of earthquake-related factors is pivotal for seismic LSA. In this study, Newmark displacement (Dn) is employed as the earthquake-related factor, providing a detailed representation of seismic characteristics. On the algorithmic side, a dual-channel convolutional neural network (CNN) model is built, and the last classification layer is replaced with two machine learning (ML) models to facilitate the extraction of deeper features related to landslide development. This research focuses on Beichuan County in Sichuan Province, China. Fifteen landslide predisposing factors, including hydrological, geomorphic, geological, vegetation cover, anthropogenic, and earthquake-related features, were extensively collected. The results demonstrate some specific issues. Dn outperforms conventional earthquake-related factors such as peak ground acceleration (PGA) and Arias intensity (Ia) in capturing seismic influence on landslide development. Under the same conditions, the OA improved by 5.55% and AUC improved by 0.055 compared to the PGA; the OA improved by 3.2% and AUC improved by 0.0327 compared to the Ia. The improved CNN outperforms ML models. Under the same conditions, the OA improved by 4.69% and AUC improved by 0.0467 compared to RF; the OA improved by 4.47% and AUC improved by 0.0447 compared to SVM. Additionally, historical landslides validate the reasonableness of the landslide susceptibility maps. The proposed method exhibits a high rate of overlap with the historical landslide inventory. The proportion of historical landslides in the very high and high susceptibility zones exceeds 87%. The method not only enhances accuracy but also produces a more fine-grained susceptibility map, providing a reliable basis for early warning of seismic landslides. [ABSTRACT FROM AUTHOR]

On 1 June 2022, a magnitude 6.1 earthquake struck the southern segment of the Longmenshan fault zone on the eastern edge of the Tibetan Plateau, once again causing casualties and economic losses. Understanding the deep-seated dynamic mechanisms that lead to seismic events in the Lushan earthquake area and assessing the potential hazards in seismic gap areas are of significant importance. In this study, we utilized 118 magnetotelluric datasets collected from the Lushan earthquake area and employed three-dimensional electromagnetic inversion with topographic considerations to characterize the deep-seated three-dimensional resistivity structure of the Lushan earthquake area. The results reveal that the Shuangshi–Dachuan fault in the Lushan earthquake area can be divided into two relatively low-resistivity zones: a western zone dipping southeastward and an eastern zone with a steeper slightly northwestern dip. These two zones intersect at a depth of approximately 20 km, forming an extensional pattern resembling a "Y" shape. The epicenters of both the 2013 and 2022 Lushan earthquakes are primarily located in the upper constricted portion of the pocket-like low-resistivity body at depth. The distribution of seismic aftershocks is confined within the region enclosed by the high-resistivity body, following the pattern of the Y-shaped low-resistivity zone. [ABSTRACT FROM AUTHOR]

Tobacco is a critical cash crop in China, so its growing status has received more and more attention. How to acquire accurate plant area, row spacing, and plant spacing at the same time have been key points for its grow status monitoring and yield prediction. However, accurately detecting small and densely arranged tobacco plants during the rosette stage poses a significant challenge. In Sichuan Province, the contours of scattered tobacco fields with different shapes are not well-extracted. Additionally, there is a lack of simultaneous methods for extracting crucial tobacco planting information, including area, row spacing, and plant spacing. In view of the above scientific problems, we proposed a method to extract the planting information of tobacco at the rosette stage with Unmanned Aerial Vehicle (UAV) remote sensing images. A detection model, YOLOv8s-EFF, was constructed for the small and weak tobacco in the rosette stage. We proposed an extraction algorithm for tobacco field area based on extended contours for different-shaped fields. Meanwhile, a planting distance extraction algorithm based on tobacco coordinates was presented. Further, four experimental areas were selected in Sichuan Province, and image processing and sample label production were carried out. Four isolated tobacco fields with different shapes in four experimental areas were used to preliminarily verify the effectiveness of the model and algorithm proposed. The results show that the precision ranges of tobacco field area, row spacing, and plant spacing were 96.51~99.04%, 90.08~99.74%, and 94.69~99.15%, respectively. And another two experimental areas, Jiange County, Guangyuan, and Dazhai County, Gulin County, and Luzhou, were selected to evaluate the accuracy of the method proposed in the research in practical application. The results indicate that the average accuracy of tobacco field area, row spacing, and plant spacing extracted by this method reached 97.99%, 97.98%, and 98.31%, respectively, which proved the extraction method of plant information is valuable. [ABSTRACT FROM AUTHOR]

The technique of interferometric synthetic aperture radar (InSAR) is increasingly employed for landslide detection over large areas, even though the limitations of initial InSAR analysis results have been well acknowledged. Steep terrain in mountainous areas may cause geometric distortions of SAR images, which could affect the accuracy of InSAR analysis results. In addition, due to the existence of massive ground deformation points in the initial InSAR analysis results, accurate landslide recognition from the initial results is challenging. To efficiently identify potential landslide areas from the ascending–descending SAR datasets, this paper presents a novel interpretation approach to analyze the initial time-series InSAR analysis results. Within the context of the proposed approach, SAR visibility analysis, conversion analysis of deformation rates obtained from the time-series InSAR analysis, and spatial analysis and statistics tools for cluster extraction are incorporated. The effectiveness of the proposed approach is illustrated through a case study of landslide identification in Danba, a county in Sichuan, China. The potential landslide regions in the study area are identified based on the interpretation of small baseline subset InSAR (SBAS-InSAR) results, obtained with ascending–descending Sentinel-1A datasets. Finally, on the basis of the field survey results, a total of 21 landslides are detected in the potential landslide regions identified, through which the results obtained from the proposed interpretation approach are tested. [ABSTRACT FROM AUTHOR]

GPS can be used to measure land motions induced by mass loading variations on the Earth's surface. This paper presents an independent component analysis (ICA)-based inversion method that uses vertical GPS coordinate time series to estimate the change of terrestrial water storage (TWS) in the Sichuan-Yunnan region in China. The ICA method was applied to extract the hydrological deformation signals from the vertical coordinate time series of GPS stations in the Sichuan-Yunnan region from the Crustal Movement Observation Network of China (CMONC). These vertical deformation signals were then inverted to TWS variations. Comparative experiments were conducted based on Gravity Recovery and Climate Experiment (GRACE) data and a hydrological model for validation. The results demonstrate that the TWS changes estimated from GPS(ICA) deformations are highly correlated with the water variations derived from the GRACE data and hydrological model in Sichuan-Yunnan region. The TWS variations are overestimated by the vertical GPS observations the northwestern Sichuan-Yunnan region. The anomalies are likely caused by inaccurate atmospheric loading correction models or residual tropospheric errors in the region with high topographic variability and can be reduced by ICA preprocessing. [ABSTRACT FROM AUTHOR]

To overcome the interference of noise on the exploration effectiveness of the controlled-source electromagnetic method (CSEM), we improved the deep learning algorithm by combining the denoising convolutional neural network (DnCNN) with the residual network (ResNet), and propose a method based on the residual denoising convolutional neural network (ResDnCNN) and shift-invariant sparse coding (SISC) for denoising CSEM data. Firstly, a sample library was constructed by adding simulated noises of different types and amplitudes to high-quality CSEM data collected. Then, the sample library was used for model training in the ResDnCNN, resulting in a network model specifically designed for denoising CSEM data. Subsequently, the trained model was employed to denoise the measured data, generating preliminary denoised data. Finally, the preliminary denoised data was processed using SISC to obtain the final denoised high-quality data. Comparative experiments with the ResNet, DnCNN, U-Net, and long short-term memory (LSTM) networks demonstrated the significant advantages of our proposed method. It effectively removed strong noise such as Gaussian, impulse, and square wave, resulting in an improvement of the signal-to-noise ratio by nearly 20 dB. Testing on CSEM data from Sichuan Province, China, showed that the apparent resistivity curves plotted using our method were smoother and more credible. [ABSTRACT FROM AUTHOR]

This study developed a satellite, reanalysis, and gauge data merging model for daily-scale analysis using a random forest algorithm in Sichuan province, characterized by complex terrain. A high-precision daily precipitation merging dataset (MSMP) with a spatial resolution of 0.1° was successfully generated. Through a comprehensive evaluation of the MSMP dataset using various indices across different periods and regions, the following findings were obtained: (1) GPM-IMERG satellite observation data exhibited the highest performance in the region and proved suitable for inclusion as the initial background field in the merging experiment; (2) the merging experiment significantly enhanced dataset accuracy, resulting in a spatiotemporal distribution of precipitation that better aligned with gauge data; (3) topographic factors exerted certain influences on the merging test, with greater accuracy improvements observed in the plain region, while the merging test demonstrated unstable effects in higher elevated areas. The results of this study present a practical approach for merging multi-source precipitation data and provide a novel research perspective to address the challenge of constructing high-precision daily precipitation datasets in regions characterized by complex terrain and limited observational coverage. [ABSTRACT FROM AUTHOR]

A series of small-magnitude earthquakes (Mw 2.9~Mw 4.9) occurred in Rong County, Sichuan Province, China between 30 March 2018 and December 2020, which threatened the safety of local residents. Determining the surface displacement and estimating the damage caused by these earthquakes are significant for earthquake relief, post-earthquake disaster assessment and hazard elimination. This paper integrates the Generic Atmospheric Correction Online Service (GACOS) with interferometry synthetic aperture radar (InSAR) to accurately detect the displacement of the series of small-magnitude earthquakes in Rong County based on 45 Sentinel-1 ascending/descending images acquired from January 2018 to December 2020. We analyze the influence of some factors involved in surface displacement, including earthquake magnitude, focal depth and the distance from the epicenter to the fault. The above measurement for small-magnitude earthquakes and statistics analysis for the displacement have not been performed before, so this can help better understand the displacement features of small-magnitude earthquakes, which are important for post-earthquake hazard assessment and disaster prevention. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method for the analysis of tectonic movement and crustal deformation by using GNSS baseline length change rates or baseline linear strain rates. The method is applied to daily coordinate solutions of continuous GNSS stations of the Crustal Movement Observation Network of China (CMONOC). The results show that: (a) The baseline linear strain rates are uneven in space, which is prominent in the Tianshan, Sichuan-Yunnan, Qinghai-Tibet Plateau, and Yanjing areas, with a maximum value of 1 × 10−7 a−1, and about two orders smaller in the South China block, the Northeast block, and the inner area of the Tarim basin, where the average baseline linear strain rates are 1.471 × 10−9 a−1, 2.242 × 10−9 a−1, and 3.056 × 10−9 a−1, respectively; (b) Active crustal deformation and strong earthquakes in the Xinjiang area are mainly located in the north and south sides of the Tianshan block; the compression deformations both inside the Tarim block and in the southern Tianshan fault zone are all increasing from east to west, and the Tarim block is not a completely "rigid block", with the shrinkage rate in the west part at about 1~2 mm/a; (c) The principal directions of crustal deformation in the Xinjiang, Tibet, and Sichuan-Yunnan regions are generally in the north—south compression and east—west extension, indicating that the collision and wedging between the Indian and Eurasian plates are still the main source of tectonic movements in mainland China. [ABSTRACT FROM AUTHOR]

This research investigates Southwest Vortex (SWV) events in China's Sichuan Basin using Fengyun-4A (FY-4A) and Global Precipitation Mission (GPM) observations. We selected representative cloud systems and precipitation cases, divided into developing, mature, and dissipating stages. Detailed analysis revealed critical characteristics of precipitation cloud systems at each stage. Our findings reveal that (1) during the SWV's developing and mature stages, a high concentration of water particles and ice crystals stimulates precipitation. In contrast, the dissipating stage is marked by fewer mixed-phase and ice particles, reducing precipitation area and intensity. (2) Near-surface precipitation in all stages is predominantly liquid, with a bright band of around 5.5 km. At the same time, stratiform precipitation is dominant in each life stage. Stratiform precipitation remains dominant throughout the life stages of the SWV, with localized convective activity evident in the developing and mature stages. (3) Mature stage particles, characterized by a configuration of 1.0–1.2 mm Dm and 31–35 dBNW (dBNW = 10log10NW), contribute significantly to near-surface precipitation. The Cloud Top Height (CTH) serves as an indicator of convective intensity and assists in characterizing raindrop concentration. These findings considerably enhance routine observations, advance our understanding of SWV events, and propose a novel approach for conducting refined observational experiments. [ABSTRACT FROM AUTHOR]

Surface fine particulate matter (PM) with a diameter of less than 2.5 microns (PM2.5) negatively impacts human health and the economy. However, due to data and model limitations, obtaining high-quality, high-spatial-resolution surface PM2.5 concentration data is a challenging task, and it is difficult to accurately assess the temporal and spatial changes in PM2.5 levels at a small regional scale. Here, we combined multi-angle implementation of atmospheric correction (MAIAC) aerosol products, ERA5 reanalysis data, etc., to construct an STW-LightGBM model that considers the spatiotemporal characteristics of air pollution and estimate the PM2.5 concentration of China's surface at 1 km resolution from 2015 to 2020. Our model performed well, and the fitting accuracy of the 10-fold cross-validation between years was 0.877–0.917. The fitting accuracy of the model was >0.85 at different time scales (month, season, and year). The average slope of the regression prediction was 0.9 annually. The results showed that PM2.5 pollution improved from 2015 to 2020. The average PM2.5 concentration decreased by 4.55 μg/m3, and the maximum decrease reached 90.51 μg/m3. The areas with high PM2.5 concentrations were predominantly in the North China Plain, Sichuan Basin, and Xinjiang in the west, and the levels in areas with elevated PM2.5 levels were consistent across most study years. The standard deviation ellipse for PM2.5 in China showed a 'northeast–southwest' spatial distribution. From an interannual perspective, the average values of the four seasonal stations in the country showed a downward trend from 2015 to 2020, with the most obvious decline in winter, from 70.67 μg/m3 in 2015 to 46.75 μg/m3 in 2020. Compared to earlier inversion studies, this work provides a more stable and accurate method for obtaining high-resolution PM2.5 data, which is necessary for local air governance and environmental ecological construction at a fine scale. [ABSTRACT FROM AUTHOR]

The forest fire burned area is one of the most basic factors used to describe forest fires and plays a vital role in damage assessment. The development of the NSSI-NDVI vegetation index triangular space method enables simultaneous calculation of the flammable non-photosynthetic vegetation (NPV), combustible photosynthetic vegetation (PV), and incombustible bare soil (BS) fractional cover in forest areas. This can be used to compensate for the calculation method that was based on NDVI vegetation index only by comparing vegetation cover before and after forest fires, with the omission of the NPV burned area. To this end, the NSSI-NDVI triangular space shape consistency before and after forest fires was elucidated through combustion and ash wetting experiments. In addition, the feasibility of the NSSI-NDVI triangular space method for the accurate calculation of the post-fire vegetation damage area was verified. Finally, the applicability and accuracy of this research method were verified based on 10 m spatial resolution satellite hyperspectral images from before and after the forest fire in Lushan, Sichuan Province, China. The NSSI-NDVI triangular space method was used to calculate the PV, NPV, and BS coverage simultaneously, and component transformation was used to calculate the burned area and burned site separately. [ABSTRACT FROM AUTHOR]

The Ms 7.0 Jiuzhaigou earthquake that occurred on 8 August 2017 triggered hundreds of landslides in the Jiuzhaigou valley scenic and historic-interest area in Sichuan, China, causing heavy casualties and serious property losses. Quick and accurate mapping of post-disaster landslide distribution is of paramount importance for earthquake emergency rescue and the analysis of post-seismic landslides distribution characteristics. The automatic identification of landslides is mostly based on medium- and low-resolution satellite-borne optical remote-sensing imageries, and the high-accuracy interpretation of earthquake-triggered landslides still relies on time-consuming manual interpretation. This paper describes a methodology based on the use of 1 m high-resolution unmanned aerial vehicle (UAV) imagery acquired after the earthquake, and proposes a support vector machine (SVM) classification method combining the roads and villages mask from pre-seismic remote sensing imagery to accurately and automatically map the landslide inventory. Compared with the results of manual visual interpretation, the automatic recognition accuracy could reach 99.89%, and the Kappa coefficient was higher than 0.9, suggesting that the proposed method and 1 m high-resolution UAV imagery greatly improved the mapping accuracy of the landslide area. We also analyzed the spatial-distribution characteristics of earthquake-triggered landslides with the influenced factors of altitude, slope gradient, slope aspect, and the nearest faults, which provided important support for the further study of post-disaster landslide distribution characteristics, susceptibility prediction, and risk assessment. [ABSTRACT FROM AUTHOR]

An Ms 6.8 earthquake struck Luding County, Ganzi Prefecture, Sichuan Province on 5 September 2022, with the epicenter about 10 km away from Hailuogou Glacier. How Hailuogou Glacier was affected by the earthquake was of major concern to society. Sentinel-1 SAR satellite imaging was used to monitor the glacier surface velocity during different periods before and after the Luding earthquake based on pixel offset tracking (POT) technology, which applies a feature-tracking algorithm to overcome the phase co-registration problems commonly encountered in large displacement monitoring. The results indicated that the velocity had a positive correlation with the average daily maximum temperature and the slope gradient on the small-slope surfaces. The correlation was not apparent on the steeper surfaces, which corresponded spatially with the identified ice avalanche region in the Planet images. It was deduced that this may be because of the occurrence of ice avalanches on surfaces steeper than 25°, or that the narrower front channel impeded the glacier's movement. The Luding earthquake did not cause a significant increase in the velocity of Hailuogou Glacier within a large range, but it disturbed the front area of the ice cascade, where the maximum velocity reached 2.5 m/d. Although the possibility of directly-induced destruction by ice avalanches after the earthquake was low, and the buffering in the downstream glacier tongue further reduced the risk of ice avalanches, the risk of some secondary hazards such as debris flow increased. The proposed method in this study might be the most efficient in monitoring and evaluating the effects of strong earthquakes on glaciers because it would not be limited by undesirable weather or traffic blockage. [ABSTRACT FROM AUTHOR]

How to acquire landslide disaster information quickly and accurately has become the focus and difficulty of disaster prevention and relief by remote sensing. Landslide disasters are generally featured by sudden occurrence, proposing high demand for emergency data acquisition. The low-altitude Unmanned Aerial Vehicle (UAV) remote sensing technology is widely applied to acquire landslide disaster data, due to its convenience, high efficiency, and ability to fly at low altitude under cloud. However, the spectrum information of UAV images is generally deficient and manual interpretation is difficult for meeting the need of quick acquisition of emergency data. Based on this, UAV images of high-occurrence areas of landslide disaster in Wenchuan County and Baoxing County in Sichuan Province, China were selected for research in the paper. Firstly, the acquired UAV images were pre-processed to generate orthoimages. Subsequently, multi-resolution segmentation was carried out to obtain image objects, and the barycenter of each object was calculated to generate a landslide sample database (including positive and negative samples) for deep learning. Next, four landslide feature models of deep learning and transfer learning, namely Histograms of Oriented Gradients (HOG), Bag of Visual Word (BOVW), Convolutional Neural Network (CNN), and Transfer Learning (TL) were compared, and it was found that the TL model possesses the best feature extraction effect, so a landslide extraction method based on the TL model and object-oriented image analysis (TLOEL) was proposed; finally, the TLOEL method was compared with the object-oriented nearest neighbor classification (NNC) method. The research results show that the accuracy of the TLOEL method is higher than the NNC method, which can not only achieve the edge extraction of large landslides, but also detect and extract middle and small landslides accurately that are scatteredly distributed. [ABSTRACT FROM AUTHOR]

Landslides are geological disasters that can cause serious severe damage to properties and lead to the loss of human lives. The application of deep learning technology to optical remote sensing images can help in the detection of landslide areas. Traditional landslide detection models usually have complex structural designs to ensure accuracy. However, this complexity leads to slow detection, and these models often do not satisfy the rapid response required for the emergency monitoring of landslides. Therefore, we designed a lightweight landslide target detection network based on a CenterNet and a ResNet50 network. We replaced the BottleNeck in the backbone network of ResNet50 with a Ghost-BottleNeck structure to reduce the number of parameters in the model. We also introduced an attention mechanism module based on channel attention and spatial attention between the adjacent GhostModule modules to rich the landslide features. We introduced a lightweight multiscale fusion method in the decoding process that presented a cross-layer sampling operation for the encoding process based on Feature Pyramid Network. To down-sample from a low resolution to a high resolution and up-sample from a high resolution to a low resolution, thus skipping the medium-resolution levels in the path. We added the feature maps obtained in the previous step to the feature fusion. The Conv module that adjusts the number of channels in the multiscale feature fusion operation was replaced with the GhostModule to achieve lightweight capability. At the end of the network, we introduced a state-of-the-art Yolov5x as a teacher network for feature-based knowledge distillation to further improve the accuracy of our student network. We used challenging datasets including multiple targets and multiscale landslides in the western mountains of Sichuan, China (e.g., Danba, Jiuzhaigou, Wenchuan, and Maoxian) to evaluate the proposed lightweight landslide detection network. The experimental results show that our model satisfied landslide emergency requirements in terms of both accuracy and speed; the parameter size of the proposed lightweight model is 18.7 MB, namely, 14.6% of the size of the original CenterNet containing the ResNet50 network. The single image detection time is 52 ms—twice as fast as the original model. The detection accuracy is 76.25%, namely, 12% higher than that of the original model. [ABSTRACT FROM AUTHOR]

Landslide is a natural disaster that seriously affects human life and social development. In this study, the characteristics and effectiveness of convolutional neural network (CNN) and conventional machine learning (ML) methods in a landslide susceptibility assessment (LSA) are compared. Six ML methods used in this study are Adaboost, multilayer perceptron neural network (MLP-NN), random forest (RF), naive Bayes, decision tree (DT), and gradient boosting decision tree (GBDT). First, the basic knowledge and structures of the CNN and ML methods, and the steps of the LSA are introduced. Then, 11 conditioning factors in three categories in the Hongxi River Basin, Pingwu County, Mianyang City, Sichuan Province are chosen to build the train, validation, and test samples. The CNN and ML models are constructed based on these samples. For comparison, indicator methods, statistical methods, and landslide susceptibility maps (LSMs) are used. The result shows that the CNN can obtain the highest accuracy (86.41%) and the highest AUC (0.9249) in the LSA. The statistical methods represented by the mean and variance of TP and TN perform more firmly on the possibility of landslide occurrence. Furthermore, the LSMs show that all models can successfully identify most of the landslide points, but for areas with a low frequency of landslides, some models are insufficient. The CNN model demonstrates better results in the recognition of the landslides' cluster region, this is also related to the convolution operation that takes the surrounding environment information into account. The higher accuracy and more concentrative possibility of CNN in LSA is of great significance for disaster prevention and mitigation, which can help the efficient use of human and material resources. Although CNN performs better than other methods, there are still some limitations, the identification of low-cluster landside areas can be enhanced by improving the CNN model. [ABSTRACT FROM AUTHOR]

Determination of the isostatic anomaly and the isostatic additional force plays a key role in understanding the deep tectonic features and dynamics in the Qinling area. At present, high-accuracy observation gravity data are one of the important means to obtain the isostatic anomaly and the isostatic additional force. Firstly, we calculate the free-air gravity anomalies and the Bouguer gravity anomalies by using hybrid gravity and GPS observation data. Then, we invert the isostatic anomaly and the isostatic additional force. The results show that the isostatic depth calculated by Airy isostatic theory is 40–49 km, and the Moho depth is 39–48 km. The Weihe Basin is in a non-isostatic state with an upward isostatic additional force that reached about 20 MPa. The isostatic anomaly and the isostatic additional force are approximately zero in the northern Sichuan Basin, which indicates that the crust is in isostatic state. The negative isostatic anomaly and isostatic additional force in Liupanshan Mountains, the southwest margin of the Ordos Basin, and the local areas of the Qinling Orogen and Dabashan indicate the existence of crustal movement. By combining the measurement of InSAR, we obtain the surface deformation information of the Weihe Basin, as well as an upward trend, which proves that the result is highly consistent with the gravity observation. [ABSTRACT FROM AUTHOR]

The ancient Aniangzhai (ANZ) landslide in Danba County, Sichuan Province of southwest China was reactivated after a series of complex hazard events that occurred in June 2020. Since then, and until June 2021, emergency engineering work was carried out to prevent the further failure of the reactivated landslide. This study investigates the potential of joint use of time series Interferometric Synthetic Aperture Radar (InSAR) and optical pixel offset tracking (POT) to assess deformation characteristic and spatial-temporal evolution of the reactivated ANZ landslide during the post-failure stage. The relationships between sun illumination differences, temporal baseline of correlation pairs and the uncertainties were deeply explored. Surface deformation along the line-of-sight (LoS) direction was retrieved by the time series InSAR processing with the two Sentinel-1 datasets, revealing a maximum deformation rate up to 190 mm/year. The large horizontal displacements were also detected from the POT processing using 11 optical images acquired by the PlanetScope satellite (3 m spatial resolution), showing a significant increase of about 24 m between 24 June 2020 and 11 June 2021. The time series analysis from the InSAR and optical POT results revealed that the reactivated ANZ landslide body is gradually slowing down to a steady deformation status since its occurrence in August 2020, indicating the effectiveness of engineering work on the prevention of further landslide. A slight acceleration was detected from both InSAR and optical POT time series analysis between May 2021 and June 2021, which could be caused by the increased rainfall in May 2021. [ABSTRACT FROM AUTHOR]

The Changning area is located in the southern Sichuan basin and the western Yangtze Plate and is the most abundant shale gas exploration area in China. In recent years, Changning has experienced frequent earthquakes with moderate magnitudes, attracting extensive interest. To investigate the magnetic characteristics in Changning, 952 land-based stations were employed to establish a magnetic anomaly model with a resolution of 2 km, and the subsurface magnetic basement structure was obtained by an iterative algorithm in the Fourier domain. The magnetic anomaly model shows significant distinctions between the northern salt mine area and the southern shale gas area. The magnetic basement includes the crystalline basement and the Sinian sedimentary rock metamorphic basement, which has strong magnetism. The large intracratonic rift that developed in the Sinian–Early Cambrian plays an important role in the evolution of Changning, which also impacts magnetic anomalies and the magnetic basement structure. Finally, by comparing the seismic wave velocity ratio structure, the deeper magnetic basement that corresponds to the higher seismic wave velocity ratio can be explained. This article implies that magnetic anomalies and magnetic basement depth have a certain correlation with earthquakes in Changning, and it provides a geodynamic reference for Changning and the southern Sichuan basin. [ABSTRACT FROM AUTHOR]

Error evaluation is essential for the improvement and application of the Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) Version 06 daily precipitation estimates, including early-, late-, and final-run products (IMERG-DE, IMERG-DL, and IMERG-DF, respectively), especially for summer precipitation in complex topographical areas. However, many existing works mainly focus on comparing the error statistical metrics of precipitation estimates, but few further analyze the internal relationships between these error statistics and geographical features. Therefore, taking Sichuan Province of China as a case study of the complex topographic and mountainous area, we adopt statistical metrics, error decomposition schemes, systematic and random error separation models, and regression methods to analyze the relationships between the spatial distribution of IMERG summer precipitation error metrics and geographical features. These features include longitude, latitude, distance from Sichuan Basin edge (DFBE), digital elevation model (DEM), normalized difference vegetation index (NDVI), slope, aspect, and topographic position index (TPI). The results show that: (1) DEM and DFBE are the two most important geographical features affecting the spatial distribution of error metrics, while both aspect and TPI have negligible effects on these metrics; (2) the variations in DEM, DFBE, and latitude have the negative relationships with error metrics; (3) longitude and DFBE do not have a direct impact on the errors, but indirectly affect the precipitation errors through the changing DEM; (4) slope shows a strong negative correlation with hit bias, and its increase significantly amplifies the sensitivity of systematic errors of hit bias from IMERG-DE and DL; and (5) the high detection probability and small missed precipitation error of the three IMERG estimates are virtually unaffected by changes in geographical features. [ABSTRACT FROM AUTHOR]

With the increasingly severe damage wreaked by forest fires, their scientific and effective prevention and control has attracted the attention of countries worldwide. The breakthrough of remote sensing technologies implemented in the monitoring of fire spread and early warning has become the development direction for their prevention and control. However, a single remote sensing data collection point cannot simultaneously meet the temporal and spatial resolution requirements of fire spread monitoring. This can significantly affect the efficiency and timeliness of fire spread monitoring. This article focuses on the mountain fires that occurred in Muli County, on 28 March 2020, and in Jingjiu Township on 30 March 2020, in Liangshan Prefecture, Sichuan Province, as its research objects. Multi-source satellite remote sensing image data from Planet, Sentinel-2, MODIS, GF-1, GF-4, and Landsat-8 were used for fire monitoring. The spread of the fire time series was effectively and quickly obtained using the remote sensing data at various times. Fireline information and fire severity were extracted based on the calculated differenced normalized burn ratio (dNBR). This study collected the meteorological, terrain, combustibles, and human factors related to the fire. The random forest algorithm analyzed the collected data and identified the main factors, with their order of importance, that affected the spread of the two selected forest fires in Sichuan Province. Finally, the vegetation coverage before and after the fire was calculated, and the relationship between the vegetation coverage and the fire severity was analyzed. The results showed that the multi-source satellite remote sensing images can be utilized and implemented for time-evolving forest fires, enabling forest managers and firefighting agencies to plan improved firefighting actions in a timely manner and increase the effectiveness of firefighting strategies. For the forest fires in Sichuan Province studied here, the meteorological factors had the most significant impact on their spread compared with other forest fire factors. Among all variables, relative humidity was the most crucial factor affecting the spread of forest fires. The linear regression results showed that the vegetation coverage and dNBR were significantly correlated before and after the fire. The vegetation coverage recovery effects were different in the fire burned areas depending on fire severity. High vegetation recovery was associated with low-intensity burned areas. By combining the remote sensing data obtained by multi-source remote sensing satellites, accurate and macro dynamic monitoring and quantitative analysis of wildfires can be carried out. The study's results provide effective information on the fires in Sichuan Province and can be used as a technical reference for fire spread monitoring and analysis through remote sensing, enabling accelerated emergency responses. [ABSTRACT FROM AUTHOR]

Rapid and accurate identification of landslides is an essential part of landslide hazard assessment, and in particular it is useful for land use planning, disaster prevention, and risk control. Recent alternatives to manual landslide mapping are moving in the direction of artificial intelligence—aided recognition of these surface processes. However, so far, the technological advancements have not produced robust automated mapping tools whose domain of validity holds in any area across the globe. For instance, capturing historical landslides in densely vegetated areas is still a challenge. This study proposed a deep learning method based on Light Detection and Ranging (LiDAR) data for automatic identification of historical landslides. Additionally, it tested this method in the Jiuzhaigou earthquake-hit region of Sichuan Province (China). Specifically, we generated a Red Relief Image Map (RRIM), which was obtained via high-precision airborne LiDAR data, and on the basis of this information we trained a Lightweight Attention U-Net (LAU-Net) to map a total of 1949 historical landslides. Overall, our model recognized the aforementioned landslides with high accuracy and relatively low computational costs. We compared multiple performance indexes across several deep learning routines and different data types. The results showed that the Multiple-Class based Semantic Image Segmentation (MIOU) and the F1_score of the LAU-Net and RRIM reached 82.29% and 87.45%, which represented the best performance among the methods we tested. [ABSTRACT FROM AUTHOR]

Global precipitation measurement (GPM) is one of the effective means employed to observe orographic precipitation, and its inversed GPM DPR data can be used to study the microphysical structure of precipitation particles. This study considers statistics on convective precipitation (CP) and stratiform precipitation (SP) events over three types of terrain (plains, mountains, and high mountains) using the DPR onboard the GPM Core Observatory from May to September of 2014–2021 to analyze the vertical structure of heavy CP and SP. In mountain areas and high mountain areas, the updraft rendered by topography or seeder-feeder mechanism is not only conducive to the collision and merger of raindrops into large raindrops, but also increases the concentration of small drops, which is the main reason why the occurrence probability of not only large but also small raindrops increases and the horizontal distribution domain of mass weighted average raindrop diameter (Dm) widens. For heavy SP, the occurrence probability of medium-diameter precipitation particles below the freezing height (FzH) over high mountains is greater than those over plains. The precipitation particles above 10 km altitude of high mountains have characteristics, such as lower droplet number concentration and larger diameter, compared with those over plains. Furthermore, the study also analyzed the correlation between storm top altitude (STA) and Dm, water vapor and STA respectively. This study is helpful to further understand the effect of topography on heavy precipitation through cloud microphysical processes and the vertical structure of precipitation. [ABSTRACT FROM AUTHOR]

Panzhihua City is a typical agricultural-forestry-pastoral and ecologically sensitive city in China. It is also an important ecological defense in the upper Yangtze River. It has abundant mineral resources, including vanadium, titanium, and water supplies. However, ecological and environmental problems emerge due to the excessive development of mining, agriculture, animal husbandry, and other non-natural urban economies. Therefore, a scientific understanding of the spatio-temporal changes of the eco-environment of Panzhihua is critical for environmental protection, city planning, and construction. To objectively evaluate the eco-environmental status of Panzhihua, the remote sensing-based ecological index (RSEI) was first applied to Panzhihua, a typical resource-based city, and its ecological environmental quality (EEQ) was quantitatively assessed from 1990 to 2020. This study explored the effects of mining activities and policies on EEQ and used change detection to reveal the spatial-temporal changes of EEQ in Panzhihua City over the past three decades. In addition, this study also verified the suitability of RSEI for evaluating EEQ in resource-based city using spatial autocorrelation, revealed the spatial heterogeneity of EEQ in Panzhihua City using optimized hot spot analysis, and showed different ecological clustering by hot spot analysis at two scales of urban and mining areas. According to the results: (1) From 1990 to 2020, the general eco-environmental condition of Panzhihua is improving, but there are still regional differences. (2) The Moran's I value ranges from 0.436 (1990) to 0.700 (2020), indicating that there is autocorrelation in the distribution of eco-environmental quality. (3) At the mine, the mean value of RSEI dropped by 20–40%, and the EEQ decreased significantly due to mining activities. (4) A series of ecological restoration policies can buffer the negative impact of mining activities on the ecosystem, resulting in a slight improvement in the quality of the ecological environment. This study evaluates the EEQ of resource-based city and its spatial-temporal changes using RSEI constructed by the Google Earth Engine (GEE) platform, which can provide theoretical support for ecological and environmental conditions monitoring, development planning, and environmental protection policy-making of a resource-based city. [ABSTRACT FROM AUTHOR]

COSMIC-2 (Constellation Observing System for Meteorology, Ionosphere and Climate- 2) dry temperature profile data from December 2019 to November 2021 are used to study stratospheric gravity waves (GWs) in the Asian monsoon region. The stratosphere between 20 and 50 km is divided into the lower, middle, and high layers based on the vertical distribution of the mean potential energy (Ep) and the horizontal distribution of GW Ep in these three layers, and their seasonal changes are analyzed. The source and propagating mechanism of GWs in middle latitudes in winter are revealed. The results show that GWs in the stratosphere have distinct distribution features during different seasons. The significant Ep in winter appears mainly in middle latitudes north of 30°N, whereas in summer, it appears in the low latitudes south of 30°N. There are significant areas of GW activity in both low and middle latitudes in spring and autumn, but their intensity is significantly weaker than in winter and summer. Areas with significant GWs and the seasonal variation of their intensity are accompanied by the Asian monsoon activity. In winter, there is a northward and upward propagating column for GWs above the Sichuan Basin, and in summer, there is an eastward and upward propagating column for GWs in the zonal band 15–25°N. The occurrence of GWs in northwestern China in winter is the result of the subtropical jet stream and topography. Once GWs enter the stratosphere, they are regulated by the winter stratospheric environment, and the GWs acquire a northerly component by the wind shear. The meridional wind shear in the background field is an important factor affecting the development and propagation of GWs. [ABSTRACT FROM AUTHOR]