Search

This research is part of a wider framework of index literature studies that have been conducted in the past few years. Some of these have had a focus on specific remote sensing (RS) technologies, while others have tackled specific threats to cultural heritage and landscapes. By considering both damages to heritage sites and technologies used for documentation and the monitoring of such occurrences, this paper unveils the current trends on a global scale in the study of the threats to heritage caused by both human-induced and natural hazards. Papers published by Europe-based researchers over the last 20 years using RS and Earth Observation (EO) techniques were surveyed alongside recommendations and programmatic documents issued by institutions in charge of heritage protection and management of several countries in Europe. Around 300 documents, including scientific articles (published from 2000 until 2022) and Grey literature (from 2008 and 2022), were analysed. The data collection and analysis were undertaken by a working group that was intentionally composed to bring together diverse perspectives and expertise, i.e., requirements of heritage professionals using RS and EO technologies, knowledge on technologies and their use in the field, and expertise in methodology implementation to support heritage management. The results highlight the type of hazards considered the most and the geographical distribution of the archaeological sites and monuments targeted by these studies; the countries the researchers are affiliated with; the types of RS and specifically satellite-based technologies used (and hence the type of data used); the tendencies of satellite data usage—visual interpretation, image processing, employment of machine learning, and AI; the technologies most applied by public institutions and practitioners; and many others. Recommendations and future trajectories are then outlined to efficiently reframe discrepancies between types of damage that have received the greatest attention in the literature and the most impactful ones in terms of the number of sites damaged. [ABSTRACT FROM AUTHOR]

In this paper, we propose a global ionospheric total electron content (TEC) maps (GIM) prediction model based on deep learning methods that is both straightforward and practical, meeting the requirements of various applications. The proposed model utilizes an encoder-decoder structure with a Convolution Long Short-Term Memory (ConvLSTM) network and has a spatial resolution of 5° longitude and 2.5° latitude, with a time resolution of 1 h. We utilized the Center for Orbit Determination in Europe (CODE) GIM dataset for 18 years from 2002 to 2019, without requiring any other external input parameters, to train the ConvLSTM models for forecasting GIM 1, 2, and 3 days in advance. Using the CODE GIM data from 1 January 2020 to 31 December 2023 as the test dataset, the performance evaluation results show that the average root mean square errors (RMSE) for 1, 2 and 3 days of forecasts are 2.81 TECU, 3.16 TECU, and 3.41 TECU, respectively. These results show improved performance compared to the IRI-Plas model and CODE's 1-day forecast product c1pg, and comparable to CODE's 2-day forecast c2pg. The model's predictions get worse as the intensity of the storm increases, and the prediction error of the model increases with the lead time. [ABSTRACT FROM AUTHOR]

The ionospheric anomalies before an earthquake may be related to earthquake preparation. The study of the ionospheric anomalies before an earthquake provides potential value for earthquake prediction. This paper proposes a method for detecting ionospheric total electron content (TEC) anomalies before an earthquake, taking the MS 7.8 earthquake in Türkiye on 6 February 2023 as an example. First, the data of four ground-based GNSS stations close to the epicenter were processed by using the sliding interquartile range method and the long short-term memory (LSTM) network. The anomaly dates detected by the two methods were identified as potential pre-earthquake TEC anomaly dates after eliminating solar and geomagnetic interference. Then, by using the sliding interquartile range method to process and analyze the CODE GIM (Center for Orbit Determination in Europe, Global Ionospheric Map) data from a global perspective, we further verified the existence of TEC anomalies before the earthquake on the above TEC anomaly days. Finally, the influence of the equatorial ionospheric anomaly (EIA) on the TEC anomaly disturbance was excluded. The results show that the ionospheric TEC anomalies on January 20, January 27, February 4, and February 5 before the Türkiye earthquake may be correlated with the earthquake. [ABSTRACT FROM AUTHOR]

Using airborne drones to monitor water quality in inland, transitional or coastal surface waters is an emerging research field. Airborne drones can fly under clouds at preferred times, capturing data at cm resolution, filling a significant gap between existing in situ, airborne and satellite remote sensing capabilities. Suitable drones and lightweight cameras are readily available on the market, whereas deriving water quality products from the captured image is not straightforward; vignetting effects, georeferencing, the dynamic nature and high light absorption efficiency of water, sun glint and sky glint effects require careful data processing. This paper presents the data processing workflow behind MapEO water, an end-to-end cloud-based solution that deals with the complexities of observing water surfaces and retrieves water-leaving reflectance and water quality products like turbidity and chlorophyll-a (Chl-a) concentration. MapEO water supports common camera types and performs a geometric and radiometric correction and subsequent conversion to reflectance and water quality products. This study shows validation results of water-leaving reflectance, turbidity and Chl-a maps derived using DJI Phantom 4 pro and MicaSense cameras for several lakes across Europe. Coefficients of determination values of 0.71 and 0.93 are obtained for turbidity and Chl-a, respectively. We conclude that airborne drone data has major potential to be embedded in operational monitoring programmes and can form useful links between satellite and in situ observations. [ABSTRACT FROM AUTHOR]

The aim of this paper is to evaluate the surface concentration of nitrogen dioxide (NO2) inferred from the Sentinel-5 Precursor Tropospheric Monitoring Instrument (S5P/TROPOMI) NO2 tropospheric column densities over Central Europe for two time periods, summer 2019 and winter 2019–2020. Simulations of the NO2 tropospheric vertical column densities and surface concentrations from the Long-Term Ozone Simulation–European Operational Smog (LOTOS-EUROS) chemical transport model are also applied in the methodology. More than two hundred in situ air quality monitoring stations, reporting to the European Environment Agency (EEA) air quality database, are used to carry out comparisons with the model simulations and the spaceborne inferred surface concentrations. Stations are separated into seven types (urban traffic, suburban traffic, urban background, suburban background, rural background, suburban industrial and rural industrial) in order to examine the strengths and shortcomings of the different air quality markers, namely the NO2 vertical column densities and NO2 surface concentrations. S5P/TROPOMI NO2 surface concentrations are inferred by multiplying the fraction of the satellite and model NO2 vertical column densities with the model surface concentrations. The estimated inferred TROPOMI NO2 surface concentrations are examined further with the altering of three influencing factors: the model vertical leveling scheme, the versions of the TROPOMI NO2 data and the air mass factors applied to the satellite and model NO2 vertical column densities. Overall, the inferred TROPOMI NO2 surface concentrations show a better correlation with the in situ measurements for both time periods and all station types, especially for the industrial stations (R > 0.6) in winter. The calculated correlation for background stations is moderate for both periods (R~0.5 in summer and R > 0.5 in winter), whereas for traffic stations it improves in the winter (from 0.20 to 0.50). After the implementation of the air mass factors from the local model, the bias is significantly reduced for most of the station types, especially in winter for the background stations, ranging from +0.49% for the urban background to +10.37% for the rural background stations. The mean relative bias in winter between the inferred S5P/TROPOMI NO2 surface concentrations and the ground-based measurements for industrial stations is about −15%, whereas for traffic urban stations it is approximately −25%. In summer, biases are generally higher for all station types, especially for the traffic stations (~−75%), ranging from −54% to −30% for the background and industrial stations. [ABSTRACT FROM AUTHOR]

As powerful economic and cultural centers, fortified sites played an important role in early medieval society. In Central Europe, early medieval fortified site research has been an essential topic for several generations. However, gradual changes in the landscape are a threat to these cultural heritage monuments. The main task of this paper was to compare the previous results from archaeological excavations with new data acquired by geophysical methods. The presented study is based on the three methods widely used in archaeology: magnetometry, ground-penetrating radar, and electrical resistivity tomography. New surveys provide information about the internal structure and the state of preservation of the fortifications in a non-destructive way. Comparison of the results encourages the evaluation of archaeological excavation and helps determine the suitability and effectiveness of geophysical methods in specific natural conditions. [ABSTRACT FROM AUTHOR]

Individual tree detection algorithms (ITD) are used to obtain accurate information about trees. Following the process of individual tree detection, it is possible to use additional processing tools to determine tree parameters such as tree height, crown base height, crown volume, or stem volume. However, many of the methods developed so far have focused on parameterising the algorithms based on the study area, height structure or tree species analysed. Applying the parameters of the method can be challenging in areas with dense and heterogeneous forests with a diverse stand structure. Therefore, this work aimed to develop a method to correct the results of ITD algorithms to identify individual trees more reliably, taking into account different ITD methods based on the Canopy Height Model. In the present study, we proposed a three-step approach to correct segmentation errors. In the first step, erroneous (under- and over-segmentation errors) and correct segments were classified. After classification, the second step was to refine the under-segmentation errors. The final step was to merge segments from the over-segmentation class with correct segments based on the specified conditions. The study was conducted in one of the most complex and diverse forest communities in Europe, making tree identification a major challenge. The accuracy of the segmentation improvements varied depending on the method applied and tree species group examined. Thus, based on the results, the paper advocates for the correction method due to its efficiency in mixed forest stands. Therefore, the present study offers a possible solution to reduce segmentation errors by considering different forest types and different CHM-based ITD methods for identifying individual trees. [ABSTRACT FROM AUTHOR]

Regional climate change affects the state of inland water bodies and their water balance, which is determined by a number of hydrometeorological and hydrogeological factors. An integral characteristic of changes in the water balance is the behavior of the level of lakes and reservoirs, which not only largely determines the physical and ecological state of water bodies, but also significantly affects the coastal infrastructure and socio-economic development of the region. This paper investigates the interannual variability of the level of the Ladoga and Onega lakes, the largest lakes in Europe located in the northwest of Russia, according to satellite altimetry data for 1993–2020. For this purpose, we used three specialized altimetry databases: DAHITI, G-REALM, and HYDROWEB. Water level data from these altimetry databases were compared with in-situ records at water level gauge stations. Information on air temperature (1945–2019) and precipitation (1966–2019) acquired at three meteostations located at Ladoga and Onega lakes was used to investigate interannual trends in the regional climate change. Finally, we discuss the potential impact of the lake level rise and regional climate warming on the infrastructure and operability of railways in this region. [ABSTRACT FROM AUTHOR]

Earth Observation satellite data allows for the monitoring of the surface of our planet at predefined intervals covering large areas. However, there is only one medium resolution sensor family in orbit that enables an observation time span of 40 and more years at a daily repeat interval. This is the AVHRR sensor family. If we want to investigate the long-term impacts of climate change on our environment, we can only do so based on data that remains available for several decades. If we then want to investigate processes with respect to climate change, we need very high temporal resolution enabling the generation of long-term time series and the derivation of related statistical parameters such as mean, variability, anomalies, and trends. The challenges to generating a well calibrated and harmonized 40-year-long time series based on AVHRR sensor data flown on 14 different platforms are enormous. However, only extremely thorough pre-processing and harmonization ensures that trends found in the data are real trends and not sensor-related (or other) artefacts. The generation of European-wide time series as a basis for the derivation of a multitude of parameters is therefore an extremely challenging task, the details of which are presented in this paper. [ABSTRACT FROM AUTHOR]

The recent COVID-19 pandemic affected various aspects of life. Several studies established the consequences of pandemic lockdown on air quality using satellite remote sensing. However, such studies have limitations, including low spatial resolution or incomplete spatial coverage. Therefore, in this paper, we propose a machine learning-based scheme to solve the pre-mentioned limitations by training an optimized space-time extra trees model for each year of the study period. The results have shown that our trained models reach a prediction accuracy up to 95% when predicting the missing values in the MODIS MCD19A2 Aerosol Optical Depth (AOD) product. The outcome of the mentioned scheme was a geo-harmonized atmospheric dataset for aerosol optical depth at 550 nm with 1 km spatial resolution and full coverage over Europe. As an application, we used the proposed machine learning based prediction approach in AOD levels analysis. We compared the mean AOD levels between the lockdown period from March to June in 2020 and the mean AOD values of the same period for the past 5 years. We found that AOD levels dropped over most European countries in 2020 but increased in several eastern and western countries. The Netherlands had the most significant average decrease in AOD levels (19%), while Spain had the highest average increase (10%). Moreover, we analyzed the relationship between the relative percentage difference of AOD and four meteorological variables. We found a positive correlation between AOD and relative humidity and a negative correlation between AOD and wind speed. The value of the proposed prediction scheme is further emphasized by taking into consideration that the reconstructed dataset can be used for future air quality studies concerning Europe. [ABSTRACT FROM AUTHOR]