Search

Forest biomass estimation is undoubtedly one of the most pressing research subjects at present. Combining multi-source remote sensing information can give full play to the advantages of different remote sensing technologies, providing more comprehensive and rich information for aboveground biomass (AGB) estimation research. Based on Landsat 8, Sentinel-2A, and ALOS2 PALSAR data, this paper takes the artificial coniferous forests in the Saihanba Forest of Hebei Province as the object of study, fully explores and establishes remote sensing factors and information related to forest structure, gives full play to the advantages of spectral signals in detecting the horizontal structure and multi-dimensional synthetic aperture radar (SAR) data in detecting the vertical structure, and combines environmental factors to carry out multivariate synergistic methods of estimating the AGB. This paper uses three variable selection methods (Pearson correlation coefficient, random forest significance, and the least absolute shrinkage and selection operator (LASSO)) to establish the variable sets, combining them with three typical non-parametric models to estimate AGB, namely, random forest (RF), support vector regression (SVR), and artificial neural network (ANN), to analyze the effect of forest structure on biomass estimation, explore the suitable AGB of artificial coniferous forests estimation of machine learning models, and develop the method of quantifying saturation value of the combined variables. The results show that the horizontal structure is more capable of explaining the AGB compared to the vertical structure information, and that combining the multi-structure information can improve the model results and the saturation value to a great extent. In this study, different sets of variables can produce relatively superior results in different models. The variable set selected using LASSO gives the best results in the SVR model, with an R 2 values of 0.9998 and 0.8792 for the training and the test set, respectively, and the highest saturation value obtained is 185.73 t/ha, which is beyond the range of the measured data. The problem of saturation in biomass estimation in boreal medium- and high-density forests was overcome to a certain extent, and the AGB of the Saihanba area was better estimated. [ABSTRACT FROM AUTHOR]

This paper considers extinction coefficient changes with height caused by the inhomogeneous distribution of scatterers in heterogeneous forests and uses the InSAR phase center height histogram and Gaussian function to fit the normalized extinction coefficient curve so as to reflect the vertical structure of the heterogeneous forest. Combining polarization decomposition based on the physical model and the PolInSAR parameter inversion method, the ground and volume coherence matrices can be separated based on the polarization characteristics and interference coherence diversity. By combining the new abovementioned parameters, the semi-empirical improved RVoG inversion model can be used to both quantify the effects of temporal decorrelation on coherence and phase errors and avoid the effects of small vertical wavenumbers on the large temporal baseline of spaceborne data. The model provided robust inversion for the height of the coniferous forest and enhanced the parameter estimation of the forest structure. This study addressed the influence of vertical structure differences on the extinction coefficient, though the coherence of the ground and volume in sparse vegetation areas could not be accurately estimated, and the oversensitivity of temporal decorrelation caused by inappropriate vertical wavenumbers. According to this method we used spaceborne L-band ALOS-2 PALSAR data on the Saihanba forest in Hebei Province acquired in 2020 for the purpose of height inversion, with a temporal baseline range of 14–70 days and the vertical wavenumber range of 0.01–0.03 rad/m. The results are further validated using sample data, with R 2 reaching 0.67. [ABSTRACT FROM AUTHOR]

In terrestrial ecosystems, vegetation is sensitive to climate change and human activities. Its spatial-temporal changes also affect the ecological and social environment. In this paper, we considered the Beijing–Tianjin–Hebei region to study the spatio-temporal vegetation patterns. The detailed analysis of a moderate-resolution imaging spectroradiometer (MODIS) data were carried out through the Google Earth Engine (GEE) platform. Our results show a slow and tortuous upward trend in the average leaf area index (LAI) in the study region for the periods 2001–2020. Specifically, Beijing had the highest LAI value, with an average of 1.64 over twenty years, followed by Hebei (1.30) and Tianjin (1.04). Among different vegetation types, forests had the highest normalized difference vegetation index (NDVI) with the range of 0.62–0.78, followed by shrubland (0.58–0.75), grassland (0.34–0.66), and cropland (0.38–0.54) over the years. Spatially, compared to the whole study area, index value in the northwestern part of the Beijing–Tianjin–Hebei region increased greatly in many areas, such as northwest Beijing, Chengde, and Zhangjiakou, indicating a significant ecological optimization. Meanwhile, there was ecological degradation in the middle and southeast regions, from Tangshan southeastward to Handan, crossing Tianjin, Langfang, the east part of Baoding, Shijiazhuang, and the west part of Cangzhou. Air temperature and precipitation were positively and significantly correlated with net primary production (NPP) and precipitation stood out as a key driver. Additionally, an intensification of the urbanization rate will negatively impact the vegetation NPP, with the shrubland and forest being affected most relative to the cropland. [ABSTRACT FROM AUTHOR]

Dynamic predictions of surface subsidence are crucial for assessing ground damage and protecting surface buildings. Based on Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technology, a method for making dynamic predictions of large-scale surface subsidence in mining areas can be established; however, the problem of phase coherence loss in InSAR data makes it impossible to predict the complete dynamic subsidence basin. In this study, a method combining the WeiBull time function and the improved probabilistic integral method (IPIM) model was established based on the PIM model, and a method for predicting the dynamic subsidence basin in the mining area was proposed by integrating the IPIM and the combined WeiBull time function. Time-series subsidence data, obtained using SBAS-InSAR, were used as fitting data, and the parameters of the combined WeiBull function were inverted, pixel by pixel, to predict the dynamic subsidence of the working face in the study area. Based on the predicted surface subsidence results of a certain moment in the working face, the parameters of the IPIM model were inverted to predict the subsidence value in the incoherent region. The subsidence predictions of the combined WeiBull time function and the IPIM model were fused using inverse distance weighting (IDW) interpolation to restore the complete subsidence basin in the mining area. This method was tested at the Wannian Mine in Hebei, and the obtained complete subsidence basin was compared with the measured data, with an absolute error range of 0 to 10 mm. The results show that the dynamic subsidence basin prediction method for the SBAS-InSAR mining area, involving the combination of the IPIM model and the combined WeiBull model, can not only accurately fit the time series of surface observation points affected by mining but also accurately restore the subsidence data in the incoherent region to obtain complete subsidence basin information in the mining area. [ABSTRACT FROM AUTHOR]

Modeling forest structure using multi-source satellite data is beneficial to understanding the relationship between vertical and horizontal structure and image features to provide more comprehensive and abundant information for the study of forest structural complexity. This study investigates and models forest structure as a multivariate structure based on sample data and active-passive remote sensing data (Landsat8, Sentinel-2A, and ALOS-2 PALSAR) from the Saihanba Forest in Hebei Province, Northern China, to measure forest structural complexity, relying on a relationship-driven model between field and satellite data. In this study, we considered the effects of the role of satellite variables in different vertical structure types and horizontal structure ranges, used two methods to stepwise select significant variables (stepwise forward selection and Pearson correlation coefficient), and employed a multivariate modeling technique (redundancy analysis) to derive a forest composite structure index (FSI), combining both horizontal and vertical structure attributes. The results show that optical texture can better represent forest structure characteristics, polarization interferometric radar information can represent the vertical structure information of forests, and combining the two can represent 77% of the variance of multiple forest structural attributes. The new FSI can explain 93% of the relationship between stand structure and satellite variables, and the linear fit R2 to the measured data reaches 0.91, which largely shows the situation of the measured data. The generated forest structure map more accurately reflects the complexity of the forest structure in the Saihanba Forest, achieving a supplementary explanation of the measured data. [ABSTRACT FROM AUTHOR]

Accurate and complete digital elevation models (DEMs) play an important fundamental role in geospatial analysis, supporting various engineering applications, human activities, and scientific research. Interferometric synthetic aperture radar (InSAR) plays an increasingly important role in DEM generation. Nonetheless, owing to its inherent characteristics, gaps often appear in regions marked by significant topographical fluctuations, necessitating an extra void-filling process. Traditional void-filling methods have operated directly on preexisting data, succeeding in relatively flat terrain. When facing mountainous regions, there will always be gross errors in elevation values. Regrettably, conventional methods have often disregarded this vital consideration. To this end, this research proposes a DEM void-filling method based on incorporating elevation outlier detection. It accounts for the detection and removal of elevation outliers, thereby mitigating the shortcomings of existing methods and ensuring robust DEM restoration in mountainous terrains. Experiments were conducted to validate the method applicability using TanDEM-X data from Sichuan, China, Hebei, China, and Oregon, America. The results underscore the superiority of the proposed method. Three traditional methods are selected for comparison. The proposed method has different degrees of improvement in filling accuracy, depending on the void status of the local terrain. Compared with the delta surface fill (DSF) method, the root mean squared error (RMSE) of the filling results has improved by 7.87% to 51.87%. The qualitative and quantitative experiments demonstrate that the proposed method is promising for large-scale DEM void-filling tasks. [ABSTRACT FROM AUTHOR]

Climate change has resulted in an increase in extreme rainstorm events, posing the challenges of urban waterlogging and runoff pollution. Low Impact Development (LID) is widely used to address the issues above, but its effectiveness is unknown in mountainous areas. Due to a flash flood and high flood peak, storage pumping stations are also needed to drain. Thus, a framework composed of storage pumping stations and Low Impact Developments (LIDs) was proposed based on the topography and the regional upstream and downstream relationships. The water quantity in this framework is applied to YI County in Hebei Province, China. The results showed that individual LIDs effectively reduced runoff volume, with the implementation area being more crucial than the location. Combining storage pumping stations with LIDs significantly reduces peak outflow and delays it by 5 to 51 min. The combined downstream implementation of storage pumping stations and LIDs yielded the most effective results. These findings offer important insights and management strategies for controlling waterlogging in mountainous cities of developing countries. [ABSTRACT FROM AUTHOR]

Frequent mining activities create a series of geological and environmental problems resulting in an immeasurable loss of life and property. Adopting effective technologies that monitor the surface subsidence of mining areas reliably and accurately is necessary. Targeting problems associated with conventional distributed scatterers interferometric synthetic aperture radar (DS-InSAR) technology, we propose a DS-InSAR technology integrating unmanned aerial vehicle (UAV) photogrammetry products divided into two key technical contents: generating an external reference digital elevation model (DEM) fused with UAV DEM and refining distributed scatterers candidates (DSCs) fused with an UAV digital orthophoto map (DOM). We selected two mining areas, one in Wu'an, Hebei, and the other in Inner Mongolia, with different surface cover types, mining depths, and topographies as the research area. We used Sentinel-1A SAR images covering a mine in Wu'an from 4 November 2018 to 4 March 2019 and a mining area in Inner Mongolia from 11 June 2018 to 21 October 2018 to compare and analyze the subsidence results. We also combined these results with data from their respective field observation stations to assess accuracy. We could apply DS-InSAR technology integrated with UAV photogrammetry products to the subsidence monitoring of two mining areas with different landforms and mining characteristics. Comparing with the leveling and total station, the experimental results show that the RMSE was reduced by about 2 mm in both mining areas, and accuracy for the Wu'an region improved to a higher degree than Inner Mongolia did. Furthermore, the refinement method of DS eliminated 965 and 2948 lower-quality DSCs in the two mining areas. These demonstrate that our proposed method can effectively improve the accuracy and reliability of subsidence results from two mining areas. [ABSTRACT FROM AUTHOR]

Satellite-derived aerosol optical depth (AOD) has been extensively utilized for retrieving ground-level PM2.5 distributions. However, the presence of non-random missing data gaps in AOD poses a challenge to directly obtaining the gap-free AOD-derived PM2.5, thereby impeding accurate exposure risk assessment. Here, this study presents a novel and flexible framework that couples stacking and flexible spatiotemporal data fusion (FSDAF) approaches. By integrating multiple models and data sources, this framework aims to generate hourly (24-h) gap-free PM2.5 estimates for the Beijing–Tianjin–Hebei (BTH) region in 2018. This study effectively reconstructed data at least three times more effectively than the original AOD-derived PM2.5, achieving the Pearson coefficient (r), the coefficient determination (R2), root mean squared error (RMSE), and mean absolute error (MAE) values of 0.91, 0.84, 19.38 µg/m3, and 12.17 µg/m3, respectively, based on entire samples. Such strong predictive performance was also exhibited in spatial-based (r: 0.92–0.93, R2: 0.85–0.87, RMSE: 18.13 µg/m3–20.18 µg/m3, and MAE: 11.21 µg/m3–12.52 µg/m3) and temporal-based (r: 0.91–0.98, R2: 0.82–0.96, RMSE: 3.8 µg/m3–21.89 µg/m3, and MAE: 2.71 µg/m3–14.00 µg/m3) validations, indicating the robustness of this framework. Additionally, this framework enables the assessment of annual and seasonal PM2.5 concentrations and distributions, revealing that higher levels are experienced in the southern region, while lower levels prevail in the northern part. Winter exhibits the most severe levels, followed by spring and autumn, with comparatively lower levels in summer. Notably, the proposed framework effectively mitigates bias in calculating population-weighted exposure risk by filling data gaps with calculated values of 51.04 µg/m3, 54.17 µg/m3, 56.24 µg/m3, and 55.00 µg/m3 in Beijing, Tianjin, Hebei, and the BTH region, respectively. [ABSTRACT FROM AUTHOR]

The aeromagnetic survey is a common remote sensing tool for detecting iron deposits. The local wavenumber of a magnetic anomaly is used to interpret the edges or positions of the sources, and can involve first- or second-order local wavenumbers. In this paper, we derived a linear equation between the second-order local wavenumber and the source location; therefore, we propose a constraint of first and second-order local wavenumbers. Tests on synthetic data show that the source parameters, computed using a combination of equations that involved different-order local wavenumbers, are closer to the true values and show a smaller spread in estimated values. For gridded data, we proved that the different-order combination allowed us to accurately estimate the source position. When applied to the aeromagnetic data from Hebei province, China, we refined the location of most magnetic features, which we interpreted as possible iron deposits. [ABSTRACT FROM AUTHOR]

Global climate change and rapid urbanization have caused increases in urban floods. Urban flood risk assessment is a vital method for preventing and controlling such disasters. This paper takes the central region of Cangzhou city in Hebei Province as an example. Detailed topographical information, such as the buildings and roads in the study area, was extracted from GF-2 data. By coupling the two models, the SWMM and MIKE21, the spatial distribution of the inundation region, and the water depth in the study area under different return periods, were simulated in detail. The results showed that, for the different return periods, the inundation region was generally consistent. However, there was a large increase in the mean inundation depth within a 10-to-30-year return period, and the increase in the maximum inundation depth and inundation area remained steady. The comprehensive runoff coefficient in all of the scenarios exceeded 0.8, indicating that the drainage system in the study area is insufficient and has a higher flood risk. The flood risk of the study area was evaluated based on the damage curve, which was obtained from field investigations. The results demonstrate that the loss per unit area was less than CNY 250/m2 in each return period in the majority of the damaged areas. Additionally, the total loss was mainly influenced by the damaged area, but, in commercial areas, the total loss was highly sensitive to the inundation depth. [ABSTRACT FROM AUTHOR]

Beijing-Tianjin-Hebei (BTH) has been suffering from severe groundwater storage (GWS) consumption and land subsidence (LS) for a long period. The overexploitation of groundwater brings about severe land subsidence, which affects the safety and development of BTH. In this paper, we utilized multi-frame synthetic aperture radar datasets obtained by the Rardarsat-2 satellite to monitor land subsidence's temporal and spatial distribution in the BTH from 2012 to 2016 based on multi-temporal interferometric synthetic aperture radar (MT-InSAR). In addition, we also employed the Gravity Recovery and Climate Experiment (GRACE) mascon datasets acquired by the Center for Space Research (CSR) and Jet Propulsion Laboratory (JPL) to obtain the GWS anomalies (GWSA) of BTH from 2003 to 2016. Then we evaluate the accuracy of the results obtained. Furthermore, we explored the relationship between the regional GWSA and the average cumulative subsidence in the BTH. The total volume change of subsidence is 59.46% of the total volume change of groundwater storage. Moreover, the long-term decreasing trend of the GWSA (14.221 mm/year) and average cumulative subsidence (17.382 mm/year) show a relatively high consistency. Finally, we analyze the heterogeneity of GWS change (GWSC) and LS change (LSC) in the four typical areas by the Lorenz curve model. The implementation of the South-to-North Water Diversion Project (MSWDP) affects the heterogeneity of GWSC and LSC. It can be seen that the largest heterogeneity of LSC lags behind the GWSC in the Tianjin-Langfang-Hengshui-Baoding area. The largest uneven subsidence in Beijing and Tianjin occurred in 2015, and the largest uneven subsidence in Hengshui-Baoding occurred in 2014. After that, the heterogeneity of subsidence gradually tends to stable. [ABSTRACT FROM AUTHOR]

The understanding of the macro- and micro-structure, particle spectrum parameters, and their evolutions in different parts of stratocumulus clouds based on aircraft observation data, is important basic data for the development of cloud microphysical parameterization schemes and the quantitative retrieval of cloud-precipitation by radar and satellite detections. In this study, a total of ten vertical measurements during three aircraft observations were selected to analyze the vertical distribution of cloud microphysical properties in different parts of stratocumulus clouds in Hebei, North China. It was found that the downdraft in the cumulus cloud area was stronger than that in the stratiform cloud area, with the temperature at the same height higher than that in the stratiform cloud area, and the height of the 0 °C layers was correspondingly higher. In terms of particle spectrum parameters, the intercept and slope parameters of particle spectrum below melting levels in the cumulus part were higher than those in stratiform clouds area in the same weather process. In different vertical detection, it was found that the ice particles have begun to melt in the negative temperature layer near 0 °C level, and there might be sublimation, fragmentation, and aggregation in the melting process of ice phase particles. In addition, the melting process changed the spectral parameters greatly and also changed the correlation between the intercept and slope of the particle spectrum. The slope below the 0 °C level increased with the increase of intercept, which was greater than that above the 0 °C level. The relationship obtained between the intercept parameter of the particle's spectrum and temperature, and the correlation between the maximum diameter and slope parameter of the particle spectrum, have certain reference significance for cloud physical parameterization and the quantitative retrieval of cloud precipitation by radar and satellite in North China and similar climate background areas. [ABSTRACT FROM AUTHOR]

Gravity Recovery and Climate Experiment (GRACE)-derived groundwater storage anomalies (GWSA) have been used to highlight groundwater depletion in regional aquifer systems worldwide. However, the use of GRACE products in smaller areas is limited owing to the coarse spatial resolution of the data product. This study utilized a dynamic downscaling method to improve the GWSA resolution from 1° to 0.05° by constructing a groundwater storage numerical model in the Beijing, Tianjin, and Hebei regions of China (BTH). The results indicate that: (1) the GRACE-derived and calculated GWSA had a good match with an average root mean squared error (RMSE) of 2.61 cm equivalent water height (EWH) and an average Nash–Sutcliffe efficiency coefficient (NSE) of 0.84 for the calibration period. (2) The hydraulic gradient coefficient and specific yield had the highest sensitivity, and transmissivity had the lowest sensitivity; however, different forcing data had no obvious influence on the GWSA. (3) The downscaled results not only exhibited time series variations that were consistent with those of the GRACE-derived solutions but also revealed a finer spatial heterogeneity of the GWSA along with increasing correlation coefficients between the GRACE-derived GWSA and the in situ measurements of groundwater levels by 0.06 and reducing the RMSE by 8.85%. (4) The downscaled results reflected the spatiotemporal change characteristics of groundwater storage in different hydrogeological units and administrative regions well. This study demonstrates the potential applications of the proposed downscaling method for both regional and local groundwater resource management. [ABSTRACT FROM AUTHOR]

The ecological redline defines areas where industrialization and urbanization development should be prohibited. Its purpose is to establish the most stringent environmental protection system to meet the urgent needs of ecological function guarantee and environmental safety. Nowadays, deep learning methods have been widely used in change detection tasks based on remote sensing images, which can just be applied to the monitoring of the ecological redline. Considering the convolution-based neural networks' lack of utilization of global information, we choose a transformer to devise a Siamese network for change detection. We also use a transformer to design a pyramid pooling module to help the network maintain more features. Moreover, we construct a self-supervised network based on a contrastive method to obtain a pre-trained model, especially for remote sensing images, aiming to achieve better results. As for study areas and data sources, we chose Hebei Province, where the environmental problem is quite nervous, and used its GF-1 satellite images to do our research. Through ablation experiments and contrast experiments, our method is proven to have significant advantages in terms of accuracy and efficiency. We also predict large-scale areas and calculate the intersection recall rate, which confirms that our method has practical values. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has presented unprecedented disruptions to human society worldwide since late 2019, and lockdown policies in response to the pandemic have directly and drastically decreased human socioeconomic activities. To quantify and assess the extent of the pandemic's impact on the economy of Hebei Province, China, nighttime light (NTL) data, vegetation information, and provincial quarterly gross domestic product (GDP) data were jointly utilized to estimate the quarterly GDP for prefecture-level cities and county-level cities. Next, an autoregressive integrated moving average model (ARIMA) model was applied to predict the quarterly GDP for 2020 and 2021. Finally, economic recovery intensity (ERI) was used to assess the extent of economic recovery in Hebei Province during the pandemic. The results show that, at the provincial level, the economy of Hebei Province had not yet recovered; at the prefectural and county levels, three prefectures and forty counties were still struggling to restore their economies by the end of 2021, even though these economies, as a whole, were gradually recovering. In addition, the number of new infected cases correlated positively with the urban NTL during the pandemic period, but not during the post-pandemic period. The study results are informative for local government's strategies and policies for allocating financial resources for urban economic recovery in the short- and long-term. [ABSTRACT FROM AUTHOR]

The emission of greenhouse gases, especially CO2, is the main factor causing global warming. Due to incomplete statistical data on energy consumption at and below the urban scale of Beijing-Tianjin-Hebei (BTH), in this study, Defense Meteorological Satellite Program Operational Linescan System (DMSP-OLS) and Suomi National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) data were combined, and a neural network model and weighted average method based on DN (Digital Number) value were used to obtain CO2 emissions at the municipal and county scales with a resolution of 1 km × 1 km from 2000–2019. Next, a spatial-temporal analysis model and spatial econometric model were used to study the CO2 emissions at different scales of BTH. This study also solved the problem that STIRPAT analysis cannot be carried out due to insufficient urban statistical CO2 emissions data. The results show that the energy CO2 emissions in BTH present a distribution pattern of "East greater than West", with a trend of first rising and then slowing down. Moreover, the rapid growth areas are mainly located in Chengde and Tianjin. The degree of regional spatial aggregation decreased year by year from 2000–2019. Population, affluence and technology factors were positively correlated with CO2 emissions in Tianjin and Hebei. For Beijing, in addition to foreign investment, factors such as urbanization rate, energy intensity, construction and transportation factors all contributed to the increase in CO2 emissions. Among them, the growth of population is the main reason for the increase of CO2 at the urban scale in BTH. Finally, based on the research results and the specific situation of the cities, corresponding policies and measures are proposed for the future low-carbon development of the cities. [ABSTRACT FROM AUTHOR]

Linear regression models are commonly used for estimating ground PM2.5 concentrations, but the global spatial autocorrelation and local spatial heterogeneity of PM2.5 distribution are either ignored or only partially considered in commonly used models for estimating PM2.5 concentrations. Therefore, taking both global spatial autocorrelation and local spatial heterogeneity into consideration, a global-local regression (GLR) model is proposed for estimating ground PM2.5 concentrations in the Yangtze River Delta (YRD) and in the Beijing, Tianjin, Hebei (BTH) regions of China based on the aerosol optical depth data, meteorological data, remote sensing data, and pollution source data. Considering the global spatial autocorrelation, the GLR model extracts global factors by the eigenvector spatial filtering (ESF) method, and combines the fraction of them that passes further filtering with the geographically weighted regression (GWR) method to address the local spatial heterogeneity. Comprehensive results show that the GLR model outperforms the ordinary GWR and ESF models, and the GLR model has the best performance at the monthly, seasonal, and annual levels. The average adjusted R2 of the monthly GLR model in the YRD region (the BTH region) is 0.620 (0.853), which is 8.0% and 7.4% (6.8% and 7.0%) higher than that of the monthly ESF and GWR models, respectively. The average cross-validation root mean square error of the monthly GLR model is 7.024 μg/m3 in the YRD region, and 9.499 μg/m3 in the BTH region, which is lower than that of the ESF and GWR models. The GLR model can effectively address the spatial autocorrelation and spatial heterogeneity, and overcome the shortcoming of the ordinary GWR model that overfocuses on local features and the disadvantage of the poor local performance of the ordinary ESF model. Overall, the GLR model with good spatial and temporal applicability is a promising method for estimating PM2.5 concentrations. [ABSTRACT FROM AUTHOR]

Forest height is an essential parameter used to derive important information about forest ecosystems, such as forest above-ground biomass. In this article, a forest height estimation approach combining P-band and X-band interferometric synthetic aperture radar (InSAR) was introduced. The forest height was estimated using the difference in the penetration of long- and short-wavelength radars to the forest. That is, the P-band and X-band InSAR data were used to extract the digital terrain model (DTM) and digital surface model (DSM), respectively. For the DTM, an improved time-frequency (TF) analysis method was used to reduce the effect of forest scatterers on the extraction of a pure understory terrain phase based on P-band InSAR. For the DSM, a novel compensation algorithm based on a multi-layer model (MLM) was proposed to remove the penetration bias of the X-band. Compared to the existing method based on the infinitely deep uniform volumes (IDUV) model, the MLM-based method is more in line with the characteristics of forest structure and the scattering mechanism for X-band InSAR. The airborne P-band repeat-pass InSAR and spaceborne X-band (TanDEM-X) single-pass InSAR data were used to verify the proposed method over the study area in the Saihanba Forest Farm in Hebei, China. The results demonstrated that the improved TF method can achieve high-precision DTM extraction based on P-band InSAR data, and the root mean square error (RMSE) was 0.94 m. The proposed MLM-based compensation method of the DSM achieved a smaller error (RMSE: 1.67 m) compared to the IDUV-based method (RMSE: 3.01 m). Under the same DTM extracted by P-band InSAR, the estimation accuracy of forest height based on the MLM method was 86.58% (RMSE: 1.81 m), which was 8.49% higher than that of the IDUV-based method (RMSE: 2.98 m). [ABSTRACT FROM AUTHOR]

Fine particulate matter (PM2.5) is a harmful air pollutant that seriously affects public health and sustainable urban development. Previous studies analyzed the spatial pattern and driving factors of PM2.5 concentrations in different regions. However, the spatiotemporal heterogeneity of various influencing factors on PM2.5 was ignored. This study applies the geographically and temporally weighted regression (GTWR) model and geographic information system (GIS) analysis methods to investigate the spatiotemporal heterogeneity of PM2.5 concentrations and the influencing factors in the middle and lower reaches of the Yellow River from 2000 to 2017. The findings indicate that: (1) the annual average of PM2.5 concentrations in the middle and lower reaches of the Yellow River show an overall trend of first rising and then decreasing from 2000 to 2017. In addition, there are significant differences in inter-province PM2.5 pollution in the study area, the PM2.5 concentrations of Tianjin City, Shandong Province, and Henan Province were far higher than the overall mean value of the study area. (2) PM2.5 concentrations in western cities showed a declining trend, while it had a gradually rising trend in the middle and eastern cities of the study area. Meanwhile, the PM2.5 pollution showed the characteristics of path dependence and region locking. (3) the PM2.5 concentrations had significant spatial agglomeration characteristics from 2000 to 2017. The "High-High (H-H)" clusters were mainly concentrated in the southern Hebei Province and the northern Henan Province, and the "Low-Low (L-L)" clusters were concentrated in northwest marginal cities in the study area. (4) The influencing factors of PM2.5 have significant spatiotemporal non-stationary characteristics, and there are obvious differences in the direction and intensity of socio-economic and natural factors. Overall, the variable of temperature is one of the most important natural conditions to play a positive impact on PM2.5, while elevation makes a strong negative impact on PM2.5. Car ownership and population density are the main socio-economic influencing factors which make a positive effect on PM2.5, while the variable of foreign direct investment (FDI) plays a strong negative effect on PM2.5. The results of this study are useful for understanding the spatiotemporal distribution characteristics of PM2.5 concentrations and formulating policies to alleviate haze pollution by policymakers in the Yellow River Basin. [ABSTRACT FROM AUTHOR]

The normalized difference vegetation index (NDVI) is an important agricultural parameter that is closely correlated with crop growth. In this study, a novel method combining the dynamic time warping (DTW) model and the long short-term memory (LSTM) deep recurrent neural network model was developed to predict the short and medium-term winter wheat NDVI. LSTM is well-suited for modelling long-term dependencies, but this method may be susceptible to overfitting. In contrast, DTW possesses good predictive ability and is less susceptible to overfitting. Therefore, by utilizing the combination of these two models, the prediction error caused by overfitting is reduced, thus improving the final prediction accuracy. The combined method proposed here utilizes the historical MODIS time series data with an 8-day time resolution from 2015 to 2020. First, fast Fourier transform (FFT) is used to decompose the time series into two parts. The first part reflects the inter-annual and seasonal variation characteristics of winter wheat NDVI, and the DTW model is applied for prediction. The second part reflects the short-term change characteristics of winter wheat NDVI, and the LSTM model is applied for prediction. Next, the results from both models are combined to produce a final prediction. A case study in Hebei Province that predicts the NDVI of winter wheat at five prediction horizons in the future indicates that the DTW–LSTM model proposed here outperforms the LSTM model according to multiple evaluation indicators. The results of this study suggest that the DTW–LSTM model is highly promising for short and medium-term NDVI prediction. [ABSTRACT FROM AUTHOR]

Automatically extracting buildings from remote sensing images with deep learning is of great significance to urban planning, disaster prevention, change detection, and other applications. Various deep learning models have been proposed to extract building information, showing both strengths and weaknesses in capturing the complex spectral and spatial characteristics of buildings in remote sensing images. To integrate the strengths of individual models and obtain fine-scale spatial and spectral building information, this study proposed a stacking ensemble deep learning model. First, an optimization method for the prediction results of the basic model is proposed based on fully connected conditional random fields (CRFs). On this basis, a stacking ensemble model (SENet) based on a sparse autoencoder integrating U-NET, SegNet, and FCN-8s models is proposed to combine the features of the optimized basic model prediction results. Utilizing several cities in Hebei Province, China as a case study, a building dataset containing attribute labels is established to assess the performance of the proposed model. The proposed SENet is compared with three individual models (U-NET, SegNet and FCN-8s), and the results show that the accuracy of SENet is 0.954, approximately 6.7%, 6.1%, and 9.8% higher than U-NET, SegNet, and FCN-8s models, respectively. The identification of building features, including colors, sizes, shapes, and shadows, is also evaluated, showing that the accuracy, recall, F1 score, and intersection over union (IoU) of the SENet model are higher than those of the three individual models. This suggests that the proposed ensemble model can effectively depict the different features of buildings and provides an alternative approach to building extraction with higher accuracy. [ABSTRACT FROM AUTHOR]