Search

Landslides are one of the extremely high-incidence and serious-loss geological disasters in the world, and the early monitoring and warning of landslides are of great importance. The Cheyiping landslide, located in western Yunnan Province, China, added many cracks and dislocations to the surface of the slope due to the severe seasonal rainfall and rise of the water level, which seriously threaten the safety of residents and roads located on the body and foot of the slope. To investigate the movement of the landslide, this paper used Sentinel-1A SAR data processed by time-series interferometric synthetic aperture radar (InSAR) technology to monitor the long-time surface deformation. The landslide boundary was defined, then the spatial distribution of landslide surface deformation from 5 January 2018 to 27 December 2021 was obtained. According to the monthly rainfall data and the temporal deformation results, the movement of the landslide was highly correlated with seasonal rainfall, and the Cheyiping landslide underwent seasonal sectional accelerated deformation. Moreover, the water level change of the Lancang River caused by the water storage of the hydropower station and seasonal rainfall accelerates the deformation of the landslide. This case study contributes to the interpretation of the slow deformation mechanism of the Cheyiping landslide and early hazard warning. [ABSTRACT FROM AUTHOR]

Seasonal variations in the vertical Global Positioning System (GPS) time series are mainly caused by environmental loading, e.g., hydrological loading (HYDL), atmospheric loading (ATML), and nontidal oceanic loading (NTOL), which can be synthesized based on models developed by various institutions. A comprehensive comparison among these models is essential to extract reliable vertical deformation data, especially on a regional scale. In this study, we selected 4 HYDL, 5 ATML, 2 NTOL, and their 40 combined products to investigate their effects on seasonal variations in vertical GPS time series at 27 GPS stations in Yunnan, southwest China. These products were provided by the German Research Center for Geosciences (GFZ), School and Observatory of Earth Sciences (EOST), and International Mass Loading Service (IMLS). Furthermore, we used the Cross Wavelet Transform (XWT) method to analyze the relative phase relationship between the GPS and the environmental loading time series. Our result showed that the largest average Root-Mean-Square (RMS) reduction value was 1.32 mm after removing the deformation associated with 4 HYDL from the vertical GPS time series, whereas the RMS reductions after 5 ATML and 2 NTOL model corrections were negative at most stations in Yunnan. The average RMS reduction value of the optimal combination of environmental loading products was 1.24 mm, which was worse than the HYDL (IMLS_GEOSFPIT)-only correction, indicating that HYDL was the main factor responding for seasonal variations at most stations in Yunnan. The XWT result showed that HYDL also explained the annual variations reasonably. Our finding implies that HYDL (IMLS_GEOSFPIT) contributes the most to the environmental loading in Yunnan, and that the ATML and NTOL models used in this paper cannot be effective to correct seasonal variations. [ABSTRACT FROM AUTHOR]

The water diversion project in Central Yunnan Province (WDP-YN) is the largest water diversion project under construction in China. However, the ecological effects of this water diversion project are still unclear. This study utilized Sentinel-2 remote sensing data to estimate fractional vegetation cover (FVC), maps spatiotemporal variations of FVC in construction areas from 2017 to 2022, and evaluates the impact of the WDP-YN on regional vegetation coverage using buffer analysis and vegetation type transition matrix methods. The study led to the following findings: (1) From 2017 to 2022, FVC within 10 km of the tunnel construction route showed a slightly downward trend or remained relatively stable with no significant changes in the spatial pattern of FVC. (2) Before and after the construction of WDP-YN, over 60% of the area within 10 km of the tunnel construction route showed no change in FVC. On Construction Route Section I (CRS-I), vegetation improved and/or degraded within 12.90% (14.10%) of the area and the regions with degraded FVC concentrated in the northern CRS-I. For Construction Route Section II (CRS-II), 11.96% and 27.51% of the regions were dominated by improved and/or degraded FVC. Vegetation changes near Groundwater Monitoring Point a (GMPa) were relatively stable. (3) The WDP-YN degraded vegetation within 2 km of both sides of CRS-I, slowing down the increase in FVC, while the WDP-YN improved vegetation within 2–6 km of both sides of CRS-II, the closer the distance to CRS-II, the faster the increase in FVC and the decrease in FVC slowed down within 0–2 km of both sides of CRS-II. This study sheds light on the impacts of water diversion infrastructure on vegetation coverage and provides practical guidance and reference for eco-environment protection and ecological restoration given water conservancy projects in China and other regions of the world. [ABSTRACT FROM AUTHOR]

The mapping and dynamic monitoring of large-scale cropland erosion rates are critical for agricultural planning but extremely challenging. In this study, using field investigation data collected from 20,155 land parcels in 2817 sample units in the National Soil Erosion Survey, as well as land use change data for two decades from the National Land Use/Cover Database of China (NLUD-C), we proposed a new point-to-surface approach to quantitatively assess long-term cropland erosion based on the CSLE model and non-homologous data voting. The results show that cropland in Yunnan suffers from serious problems, with an unsustainable mean soil erosion rate of 40.47 t/(ha·a) and an erosion ratio of 70.11%, which are significantly higher than those of other land types. Engineering control measures (ECMS) have a profound impact on reducing soil erosion; the soil erosion rates of cropland with and without ECMs differ more than five-fold. Over the past two decades, the cropland area in Yunnan has continued to decrease, with a net reduction of 7461.83 km2 and a ratio of −10.55%, causing a corresponding 0.32 × 108 t (12.12%) reduction in cropland soil loss. We also quantified the impact of different LUCC scenarios on cropland erosion, and extraordinarily high variability was found in soil loss in different basins and periods. Conversion from cropland to forest contributes the most to cropland erosion reduction, while conversion from grassland to cropland contributes 56.18% of the increase in soil erosion. Considering the current speed of cropland regulation, it is the sharp reduction in land area that leads to cropland erosion reduction rather than treatments. The choice between the Grain for Green Policy and Cropland Protecting Strategy in mountainous areas should be made carefully, with understanding and collaboration between different roles. [ABSTRACT FROM AUTHOR]

Promoting the accessibility of basic public service facilities is key to safeguarding and improving people's lives. Effective public service provision is especially important for the sustainable development of less developed regions. Lincang in Yunnan Province is a typical underdeveloped region in China. In parallel, multisource remote sensing data with higher spatial resolution provide more precise results for small-scale regional accessibility assessment. Thus, we use an assessment method to measure and evaluate the accessibility of three types of infrastructure in Lincang based on multisource geospatial data. We further analyze the matching between public service facility accessibility and the socioeconomic attributes of inhabitant clusters and different poverty groups. The results show that the accessibility of educational facilities is currently better than that of health facilities in Lincang and that of sanitation facilities is relatively poor. Public service facility accessibility varies significantly among different types of inhabitant clusters, with better accessibility in inhabitant clusters with high levels of population density, aging, and income. Accessibility to healthcare, education, and sanitation is negatively correlated to varying degrees of poverty levels of poor groups, and the mean values of accessibility to various types of public facilities vary significantly across poor groups. Our findings can help inform policy formulation and provide theoretical support for planning and optimizing the layout of public facilities. [ABSTRACT FROM AUTHOR]

This paper estimates lake level variations over two small and adjacent lakes in the Tibetan plateau (TP), namely Gemang Co and Zhangnai Co, as well as the inland Dianchi Lake in China using CryoSat-2 SARIn-mode and LRM 20-Hz waveforms over the period of 2011–2018. Different retrackers and a dedicated data editing procedure have been used to process CryoSat-2 data for determining the lake level time series. The lake level estimations are indirectly validated against those from Jason-2 in TP and from in situ data in Dianchi Lake, both showing good agreement with strong correlation coefficients >0.74. The results of this paper suggest that the official ICE retracker for LRM data and APD-PPT retracker for SARIn-mode waveforms are the most appropriate retrackers over Dianchi Lake and TP lakes, respectively. The trend estimates of the time series derived by both retrackers are 61.0 ± 10.8 mm/yr for Gemang Co and Zhangnai Co in TP, and 30.9 ± 64.9 mm/yr for Dianchi Lake, indicating that the lake levels over three lakes were continuously rising over the study period. The results of this study show that CryoSat-2 SARIn-mode data can be used for monitoring many small lakes that have not been measured by other altimetry missions in TP. [ABSTRACT FROM AUTHOR]

Change detection in high resolution (HR) remote sensing images faces more challenges than in low resolution images because of the variations of land features, which prompts this research on faster and more accurate change detection methods. We propose a pixel-level semantic change detection method to solve the fine-grained semantic change detection for HR remote sensing image pairs, which takes one lightweight semantic segmentation network (LightNet), using the parameter-sharing SiameseNet, as the architecture to carry out pixel-level semantic segmentations for the dual-temporal image pairs and achieve pixel-level change detection based directly on semantic comparison. LightNet consists of four long–short branches, each including lightweight dilated residual blocks and an information enhancement module. The feature information is transmitted, fused, and enhanced among the four branches, where two large-scale feature maps are fused and then enhanced via the channel information enhancement module. The two small-scale feature maps are fused and then enhanced via a spatial information enhancement module, and the four upsampling feature maps are finally concatenated to form the input of the Softmax. We used high resolution remote sensing images of Lake Erhai in Yunnan Province in China, collected by GF-2, to make one dataset with a fine-grained semantic label and a dual-temporal image-pair label to train our model, and the experiments demonstrate the superiority of our method and the accuracy of LightNet; the pixel-level semantic change detection methods are up to 89% and 86%, respectively. [ABSTRACT FROM AUTHOR]

Mining for rare earth elements is rapidly increasing, driven by current and projected demands for information and energy technologies. Following China's Central Government's 2012 strategy to shift away from mining in favor of value-added processing, primary extraction has increased outside of China. Accordingly, changes in mineral exploitation in China and Myanmar have garnered considerable attention in the past decade. The prevailing assumption is that mining in China has decreased while mining in Myanmar has increased, but the dynamic in border regions is more complex. Our empirical study used Google Earth Engine (GEE) to characterize changes in mining surface footprints between 2005 and 2020 in two rare earth mines located on either side of the Myanmar–China border, within Kachin State in northern Myanmar and Nujiang Prefecture in Yunnan Province in China. Our results show that the extent of the mining activities increased by 130% on China's side and 327% on Myanmar's side during the study period. We extracted surface reflectance images from 2005 and 2010 from Landsat 5 TM and 2015 and 2020 images from Landsat 8 OLI. The Normalized Vegetation Index (NDVI) was applied to dense time-series imagery to enhance landcover categories. Random Forest was used to categorize landcover into mine and non-mine classes with an overall accuracy of 98% and a Kappa Coefficient of 0.98, revealing an increase in mining extent of 2.56 km2, covering the spatial mining footprint from 1.22 km2 to 3.78 km2 in 2005 and 2020, respectively, within the study area. We found a continuous decrease in non-mine cover, including vegetation. Both mines are located in areas important to ethnic minority groups, agrarian livelihoods, biodiversity conservation, and regional watersheds. The finding that mining surface areas increased on both sides of the border is significant because it shows that national-level generalizations do not align with local realities, particularly in socially and environmentally sensitive border regions. The quantification of such changes over time can help researchers and policymakers to better understand the shifting geographies and geopolitics of rare earth mining, the environmental dynamics in mining areas, and the particularities of mineral extraction in border regions. [ABSTRACT FROM AUTHOR]

It is important to improve the accuracy of models estimating aboveground biomass (AGB) in large areas with complex geography and high forest heterogeneity. In this study, k-nearest neighbors (k-NN), gradient boosting machine (GBM), random forest (RF), quantile random forest (QRF), regularized random forest (RRF), and Bayesian regularization neural network (BRNN) machine learning algorithms were constructed to estimate the AGB of four forest types based on environmental factors and the variables selected by the Boruta algorithm in Yunnan Province and using integrated Landsat 8 OLI and Sentinel 2A images. The results showed that (1) DEM was the most important variable for estimating the AGB of coniferous forests, evergreen broadleaved forests, deciduous broadleaved forests, and mixed forests; while the vegetation index was the most important variable for estimating deciduous broadleaved forests, the climatic factors had a higher variable importance for estimating coniferous and mixed forests, and texture features and vegetation index had a higher variable importance for estimating evergreen broadleaved forests. (2) In terms of specific model performance for the four forest types, RRF was the best model both in estimating the AGB of coniferous forests and mixed forests; the R2 and RMSE for coniferous forests were 0.63 and 43.23 Mg ha−1, respectively, and the R2 and RMSE for mixed forests were 0.56 and 47.79 Mg ha−1, respectively. BRNN performed the best in estimating the AGB of evergreen broadleaved forests; the R2 was 0.53 and the RMSE was 68.16 Mg ha−1. QRF was the best in estimating the AGB of deciduous broadleaved forests, with R2 of 0.43 and RMSE of 45.09 Mg ha−1. (3) RRF was the best model for the four forest types according to the mean values, with R2 and RMSE of 0.503 and 52.335 Mg ha−1, respectively. In conclusion, different variables and suitable models should be considered when estimating the AGB of different forest types. This study could provide a reference for the estimation of forest AGB based on remote sensing in complex terrain areas with a high degree of forest heterogeneity. [ABSTRACT FROM AUTHOR]

Drought is a meteorological phenomenon that negatively impacts agricultural production. In recent years, southwest China has frequently experienced agricultural droughts; these have significantly impacted the economy and the ecological environment. Although several studies have been conducted on agricultural droughts, few have examined the factors driving agricultural droughts from the perspective of water and energy balance. This study aimed to address this gap by utilizing the Standardized Soil Moisture Index (SSMI) and the Budyko model to investigate agricultural drought in southwest China. The study identified four areas in Southwest China with a high incidence of agricultural drought from 2000 to 2020. Yunnan and the Sichuan-Chongqing border regions experienced drought in 10% of the months during the study period, while Guangxi and Guizhou had around 8% of months with drought. The droughts in these regions exhibited distinct seasonal characteristics, with Yunnan experiencing significantly higher drought frequency than other periods from January to June, while Guizhou and other areas were prone to severe droughts in summer and autumn. The Budyko model is widely used as the mainstream international framework for studying regional water and energy balance. In this research, the Budyko model was applied to analyze the water and energy balance characteristics in several arid regions of southwest China using drought monitoring data. Results indicate that the water and energy balances in Yunnan and Sichuan-Chongqing are more moisture-constrained, whereas those in Guizhou and Guangxi are relatively stable, suggesting lower susceptibility to extreme droughts. Furthermore, during severe drought periods, evapotranspiration becomes a dominant component of the water cycle, while available water resources such as soil moisture decrease. After comparing the causes of drought and non-drought years, it was found that the average rainfall in southwest China is approximately 30% below normal during drought years, and the temperature is 1–2% higher than normal. These phenomena are most noticeable during the spring and winter months. Additionally, vegetation transpiration is about 10% greater than normal during dry years in Southwest China, and soil evaporation increases by about 5% during the summer and autumn months compared to normal conditions. [ABSTRACT FROM AUTHOR]

Accurate information on dominant tree species and their spatial distribution in subtropical natural forests are key ecological monitoring factors for accurately characterizing forest biodiversity, depicting the tree competition mechanism and quantitatively evaluating forest ecosystem stability. In this study, the subtropical natural forest in northwest Yunnan province of China was selected as the study area. Firstly, an object-oriented multi-resolution segmentation (MRS) algorithm was used to segment individual tree crowns from the UAV RGB imagery and satellite multispectral imagery in the forests with different densities (low (547 n/ha), middle (753 n/ha) and high (1040 n/ha)), and parameters of the MRS algorithm were tested and optimized for accurately extracting the tree crown and position information of the individual tree. Secondly, the texture metrics of the UAV RGB imagery and the spectral metrics of the satellite multispectral imagery within the individual tree crown were extracted, and the random forest algorithm and three deep learning networks constructed in this study were utilized to classify the five dominant tree species. Finally, we compared and evaluated the performance of the random forest algorithm and three deep learning networks for dominant tree species classification using the field measurement data, and the influence of the number of training samples on the accuracy of dominant tree species classification using deep learning networks was investigated. The results showed that: (1) Stand density had little influence on individual tree segmentation using the object-oriented MRS algorithm. In the forests with different stand densities, the F1 score of individual tree segmentation based on satellite multispectral imagery was 71.3–74.7%, and that based on UAV high-resolution RGB imagery was 75.4–79.2%. (2) The overall accuracy of dominant tree species classification using the light-weight network MobileNetV2 (OA = 71.11–82.22%), residual network ResNet34 (OA = 78.89–91.11%) and dense network DenseNet121 (OA = 81.11–94.44%) was higher than that of the random forest algorithm (OA = 60.00–64.44%), among which DenseNet121 had the highest overall accuracy. Texture metrics improved the overall accuracy of dominant tree species classification. (3) For the three deep learning networks, the changes in overall accuracy of dominant tree species classification influenced by the number of training samples were 2.69–4.28%. [ABSTRACT FROM AUTHOR]

Nature-based Solutions (NbS) can undoubtedly play a significant role in carbon neutrality strategy. Forests are a major part of the carbon budget in terrestrial ecosystems. The possible response of the carbon balance of southwestern forests to different climate change scenarios was investigated through a series of simulations using the forest ecosystem carbon budget model for China (FORCCHN), which clearly represents the influence of climate factors on forest carbon sequestration. Driven by downscaled global climate model (GCM) data, the FORCCHN evaluates the carbon sink potential of southwestern forest ecosystems under different shared socioeconomic pathways (SSPs). The results indicate that, first, gross primary productivity (GPP), ecosystem respiration (ER) and net primary productivity (NPP) of forest ecosystems are expected to increase from 2020 to 2060. Forest ecosystems will maintain a carbon sink, but net ecosystem productivity (NEP) will peak and begin to decline in the 2030s. Second, not only is the NEP in the SSP1-2.6 scenario higher than in the other climate change scenarios for 2025–2035 and 2043–2058, but the coefficient of variation of the NEP is also narrower than in the other scenarios. Third, in terms of spatial distribution, the carbon sequestration potential of northwest and central Yunnan is significantly higher than that of other regions, with a slight upward trend in NEP in the future. Finally, GPP and ER are significantly positively correlated with temperature and insignificantly correlated with precipitation, and the increasing temperature will have a negative and unstable impact on forest carbon sinks. This study provides a scientific reference for implementing forest management strategies and achieving sustainable development. [ABSTRACT FROM AUTHOR]

Surface mass variations inferred from the Global Positioning System (GPS), and observed by the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (GFO) complement each other in terms of spatial and temporal coverage. This paper presents an analysis of regional surface mass variations inverted from GPS vertical displacements under different density distributions of GPS stations, and compares the GPS-derived mass variations with GRACE/GFO inversion results in spatial and temporal domains. To this end, GPS vertical displacement data from a total of 85 permanent GPS stations of the Crustal Movement Observation Network of China (CMONOC), the latest GRACE/GFO RL06 spherical harmonic (SH) solutions and GRACE RL06 mascon solutions are used to investigate surface mass variations in four regions or basins, including the Yunnan Province (YNP), Min River Basin (MRB), Jialing River Basin (JLRB), and Wu River Basin (WRB) in Southwest China. Our results showed that the spatial distributions and seasonal characteristics of GPS-derived mass change time series agree well with those from GRACE/GFO observations, especially in regions with relatively dense distributions of GPS stations (e.g., in the YNP and MRB), but there are still obvious discrepancies between the GPS and GRACE/GFO results. Scale factor methods (both basin-scaled and pixel-scaled) were employed to reduce the amplitude discrepancies between GPS and GRACE/GFO results. The results also showed that the one-year gap between the GRACE and GFO missions can be bridged by scaled GPS-derived mass change time series in the four studied regions, especially in the YNP and MRB regions (with relatively dense distributions of GPS stations). [ABSTRACT FROM AUTHOR]

The estimation of forest aboveground biomass (AGB) using Landsat 8 operational land imagery (OLI) images has been extensively studied, but forest aboveground biomass (AGB) is often difficult to estimate accurately, in part due to the multi-level structure of forests, the heterogeneity of stands, and the diversity of tree species. In this study, a habitat dataset describing the distribution environment of forests, Landsat 8 OLI image data of spectral reflectance information, as well as a combination of the two datasets were employed to estimate the AGB of the three common pine forests (Pinus yunnanensis forests, Pinus densata forests, and Pinus kesiya forests) in Yunnan Province using a parametric model, stepwise linear regression model (SLR), and a non-parametric model, such as random forest (RF) and support vector machine (SVM). Based on the results, the following conclusions can be drawn. (1) As compared with the parametric model (SLR), the non-parametric models (RF and SVM) have a better fitting performance for estimating the AGB of the three pine forests, especially in the AGB segment of 40 to 200 Mg/ha. The non-parametric model is more sensitive to the number of data samples. In the case of the Pinus densata forest with a sample size greater than 100, RF fitting provides better fitting performance than SVM fitting, and the SVM fitting model is better suited to the AGB estimation of the Pinus yunnanensis forest with a sample size of less than 100. (2) Landsat 8 OLI images exhibit superior accuracy in estimating the AGB of the three pine forests using a single dataset. Variables, such as texture and vegetation index variables, which can reflect the comprehensive reflection information of ground objects, play a significant role in estimating AGBs, especially the texture variables. (3) By incorporating the combined dataset with characteristics of tree species distribution and ground object reflectance spectrum, the accuracy and stability of AGB estimation of the three pine forests can be improved. Moreover, the employment of a combined dataset is also effective in reducing the number of estimation errors in cases with AGB less than 100 Mg/ha or exceeding 150 Mg/ha. [ABSTRACT FROM AUTHOR]

Yunnan pine shoot beetles (PSB), Tomicus yunnanensis and Tomicus minor have spread through southwestern China in the last five years, leading to millions of hectares of forest being damaged. Thus, there is an urgent need to develop an effective approach for accurate early warning and damage assessment of PSB outbreaks. Remote sensing is one of the most efficient methods for this purpose. Despite many studies existing on the mountain pine beetle (MPB), very little work has been undertaken on assessing PSB stress using remote sensing. The objective of this paper was to develop a spectral linear mixing model aided by radiative transfer (RT) and a new Yellow Index (YI) to simulate the reflectance of heterogeneous canopies containing damaged needles and quantitatively inverse their PSB stress. The YI, the fraction of dead needles, is a physically-explicit stress indicator that represents the plot shoots damage ratio (plot SDR). The major steps of this methods include: (1) LIBERTY2 was developed to simulate the reflectance of damaged needles using YI to linearly mix the green needle spectra with the dead needle spectra; (2) LIBERTY2 was coupled with the INFORM model to scale the needle spectra to the canopy scale; and (3) a look-up table (LUT) was created against Sentinel 2 (S2) imagery and inversed leaf chlorophyll content (LCC), green leaf area index (LAI) and plot SDR. The results show that (1) LIBERTY2 effectively simulated the reflectance spectral values on infested needles (mean relative error (MRE) = 1.4–18%), and the YI can indicate the degrees of needles damage; (2) the coupled LIBERTY2-INFORM model is suitable to estimate LAI (R2 = 0.73, RMSE = 0.17 m m−2, NRMSE = 11.41% and the index of agreement (IOA) = 0.92) and LCC (R2 = 0.49, RMSE = 56.24 mg m−2, NRMSE = 25.22% and IOA = 0.72), and is better than the original LIBERTY model (LAI: R2 = 0.38, RMSE = 0.43 m m−2, NRMSE = 28.85% and IOA = 0.68; LCC: R2 = 0.34, RMSE = 76.44 mg m−2, NRMSE = 34.23% and IOA = 0.57); and (3) the inversed YI is positively correlated with the measured plot SDR (R2 = 0.40, RMSE = 0.15). We conclude that the LIBERTY2 model improved the reflectance simulation accuracy of both the needles and canopies, making it suitable for assessing PSB stress. The YI has the potential to assess PSB damage. [ABSTRACT FROM AUTHOR]

Southwest China has abundant grassland resources, but they are mainly scattered across fragmented mountainous terrain with frequently cloudy and rainy weather, making their accurate identification by remote sensing challenging. Therefore, the goal of this study was to generate prefecture-level city-scale mountainous grassland distribution data to support the development of sustainable grassland husbandry. Here, we proposed a sample selection method and comprehensively utilized multi-source data to obtain the quasi-10 m southwest grassland distribution data. The sample selection method was to first determine the sample selection range based on multi-source land use/cover database, and then to randomly select the samples under the constraint of secondary land use types, multiple factors of terrain and pure pixels. This method can deal with the difficulty in identifying the fragmented grassland distribution caused by steep mountains and hills. In addition, a multispectral time series dataset was constructed based on the fusion of Landsat 8 OLI and Sentinel-2A/B data due to cloudy and rainy weather and was used as one of the input features along with synthetic aperture radar Sentinel-1 time series data and the terrain multi-factor data. Finally, a remote sensing method to accurately identify grassland distribution in southwest China was constructed based on the Google Earth Engine (GEE) platform. Taking Zhaotong City, a prefecture-level city in Yunnan Province, as an example, a thematic map of grassland distribution with an overall accuracy of 88.21% was obtained using the above method. This map has been used by the local government of Zhaotong City in their planning of the development of sustainable grassland husbandry. [ABSTRACT FROM AUTHOR]

The gold (Au) geochemical anomaly is an important indicator of gold mineralization. While the traditional field geochemical exploration method is time-consuming and expensive, the hyperspectral remote sensing technique serves as a robust technique for the delineation and mapping of hydrothermally altered and weathered mineral deposits. Nonetheless, mineralization element anomaly detection was still seldomly used in previous hyperspectral remote sensing applications in mineralization. This study explored the coupling relationship between Gaofen-5 (GF-5) hyperspectral data and Au geochemical anomalies through several models. The Au geochemical anomalies in the Chahuazhai mining area, Qiubei County, Yunnan Province, SW China, was studied in detail. First, several noise reduction methods including radiometric calibration, Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH), Savitzky–Golay filter, and endmember choosing methods including Minimum Noise Fraction (MNF) transformation, matched filtering, and Fast Fourier Transform (FFT) transformation were applied to the Gaofen-5 (GF-5) hyperspectral data processing. The Spectrum-Area (S-A) method was introduced to build an FFT filter to highlight the spectral abnormal characteristics associated with Au geochemical anomaly information. Specifically, the Matched Filtering (MF) technique was applied to the dataset to find the Au geochemical anomaly abundances of endmembers with innovative large-sample learning. Then, Multiple Linear Regression (MLR), Partial Least Squares (PLS) regression, a Back Propagation (BP) network, and Geographically Weighted Regression (GWR) were used to reveal the coupling relationship between the spectra of the processed hyperspectral data and the Au geochemical anomalies. The results show that the GWR analysis has a much higher coefficient of determination, which implies that the Au geochemical anomalies and the spectral information are highly related to spatial locations. GWR works especially well for showing the regional Au geochemical anomaly trend and simulating the Au concentrated areas. The GWR model with application of the S-A method is applicable to the detection of Au geochemical anomalies, which could provide a potential method for Au deposit exploration using GF-5 hyperspectral data. [ABSTRACT FROM AUTHOR]

Dense Global Position System (GPS) arrays can be used to invert the terrestrial water-storage anomaly (TWSA) with higher accuracy. However, the uneven distribution of GPS stations greatly limits the application of GPS to derive the TWSA. Aiming to solve this problem, we grid the GPS array using regression to raise the reliability of TWSA inversion. First, the study uses the random forest (RF) model to simulate crustal deformation in unobserved grids. Meanwhile, the new Machine-Learning Loading-Inverted Method (MLLIM) is constructed based on the traditional GPS derived method to raise the truthfulness of TWSA inversion. Second, this research selects southwest China as the study region, the MLLIM and traditional GPS inversion methods are used to derive the TWSA, and the inverted results are contrasted with datasets of the Gravity Recovery and Climate Experiment (GRACE) Mascon and the Global Land Data Assimilation System (GLDAS) model. The comparison shows that values of Pearson Correlation Coefficient (PCC) between the MLLIM and GRACE and GRACE Follow-On (GRACE-FO) are equal to 0.91 and 0.88, respectively; and the values of R-squared (R2) are equal to 0.76 and 0.65, respectively; the values of PCC and R2 between MLLIM and GLDAS solutions are equal to 0.79 and 0.65. Compared with the traditional GPS inversion, the MLLIM improves PCC and R2 by 8.85% and 7.99% on average, which indicates that the MLLIM can improve the accuracy of TWSA inversion more than the traditional GPS method. Third, this study applies the MLLIM to invert the TWSA in each province of southwest China and combines the precipitation to analyze the change of TWSA in each province. The results are as follows: (1) The spatial distribution of TWSA and precipitation is coincident, which is highlighted in southwest Yunnan and southeast Guangxi; (2) this study compares TWSA of MLLIM with GRACE and GLDAS solutions in each province, which indicates that the maximum value of PCC is as high as 0.86 and 0.94, respectively, which indicates the MLLIM can be used to invert the TWSA in the regions with sparse GPS stations. The TWSA based on the MLLIM can be used to fill the vacancy between GRACE and GRACE-FO. [ABSTRACT FROM AUTHOR]

On 3 August 2014, an Mw 6.2 earthquake occurred in Ludian, Yunnan Province, China (27.245° N 103.427° E). This damaging earthquake caused approximately 400 fatalities, 1800 injuries, and the destruction of at least 12,000 houses. Using air temperature data of the National Center for Environmental Prediction (NCEP) and the tidal force fluctuant analysis (TFFA) method, we derive the temperature variations in multiple air layers between before and after the Ludian earthquake. In the spatial range of 30° × 30° (12°–42° N, 88°–118° E) of China, a thermal anomaly appeared only on or near the epicenter before earthquake, and air was heated from the land, then uplifted by a heat flux, and then cooled and dissipated upon rising. With the approaching earthquake, the duration and range of the thermal anomaly during each tidal cycle was found to increase, and the amplitude of the thermal anomaly varied with the tidal force potential: air temperature was found to rise during the negative phase of the tidal force potential, to reach peak at its trough, and to attenuate when the tidal force potential was rising again. A significance test supports the hypothesis that the thermal anomalies are physically related to Ludian earthquakes rather than being coincidences. Based on these results, we argue that the change of air temperature could reflect the stress changes modulated under the tidal force. Moreover, unlike the thermal infrared remote sensing data, the air temperature data provided by NCEP are not affected by clouds, so it has a clear advantage for monitoring the pre-earthquake temperature variation in cloudy areas. [ABSTRACT FROM AUTHOR]

Aiming at the problem that the estimation of electric power consumption (EPC) by using night-time light (NTL) data is mostly concentrated in large areas, a method for estimating EPC in rural areas is proposed. Rural electric power consumption (REPC) is a key indicator of the national socio-economic development. Despite an improved quality of life in rural areas, there is still a big gap between electricity consumption between rural residents and urban residents in China. The experiment takes REPC as the research target, selects Dehong (DH) Dai Jingpo Autonomous Prefecture of Yunnan Province as an example, and uses the NTL data from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day–Night Band (DNB) carried by the Suomi National Polar-orbiting Partnership (NPP) Satellite from 2012 to 2017, toponym and points-of-interest (POI) data as the main data source. By performing kernel density estimation to extract the urban center and rural area boundaries in the prefecture, and combining the county-level boundary data and electric power data, a linear regression model of the total rural NTL intensity and REPC is estimated. Finally, according to the model, the EPC in ethnic minority rural areas is estimated at a 1-km spatial resolution. The results show that the NPP-REPC model can simulate REPC within a small average error (17.8%). Additionally, there are distinct spatial differences of REPC in ethnic minority areas. [ABSTRACT FROM AUTHOR]

Inland lake variations are considered sensitive indicators of global climate change. However, human activity is playing as a more and more important role in inland lake area variations. Therefore, it is critical to identify whether anthropogenic activity or natural events is the dominant factor in inland lake surface area change. In this study, we proposed a method that combines the Douglas-Peucker simplification algorithm and the bend simplification algorithm to locate major lake surface area disturbances. These disturbances were used to extract the features that been used to classify disturbances into anthropogenic or natural. We took the nine lakes in Yunnan Province as test sites, a 31-year long (from 1987 to 2017) time series Landsat TM/OLI images and HJ-1A/1B used as data sources, the official records were used as references to aid the feature extraction and disturbance identification accuracy assessment. Results of our method for disturbance location and disturbance identification could be concluded as follows: (1) The method can accurately locate the main lake changing events based on the time series lake surface area curve. The accuracy of this model for segmenting the time series of lake surface area in our study area was 94.73%. (2) Our proposed method achieved an overall accuracy of 87.75%, with an F-score of 85.71 for anthropogenic disturbances and an F-score of 88.89 for natural disturbances. (3) According to our results, lakes in Yunnan Province of China have undergone intensive disturbances. Human-induced disturbances occurred almost twice as much as natural disturbances, indicating intensified disturbances caused by human activities. This inland lake area disturbance identification method is expected to uncover whether a disturbance to inland lake area is human activity-induced or a natural event, and to monitor whether disturbances of lake surface area are intensified for a region. [ABSTRACT FROM AUTHOR]

Uncertainties in forest aboveground biomass (AGB) estimates resulting from over- and underestimations using remote sensing data have been widely studied. The uncertainties may occur due to the spatial effects of the plot data. In this study, we collected AGB data from a total of 147 Pinus densata forest sample plots in Yunnan of southwestern China and analyzed the spatial effects on the estimation of AGB. An ordinary least squares (OLS) and four spatial regression methods were compared for the estimation using Landsat 8-OLI images. Through the spatial analysis of AGB and residuals of model predictions, it was found that the spatial autocorrelation and heterogeneity of the plot data could not be ignored. Compared with the OLS, the impact of the spatial effects on AGB estimation could be reduced slightly by the spatial lag model (SLM) and the spatial error model (SEM) and greatly reduced by the linear mixed effects model (LMM) and geographically weighted regression (GWR) based on the distributions of prediction residuals, global Moran's I, and Z score. The spatial regression models had better performance for model fitting and prediction because of the reduction in overestimations and underestimations for the forests with small and large AGB values, respectively. However, the reductions in the overestimations and underestimations varied depending on the spatial regression models. The GWR provided the most accurate predictions with the largest R2 (0.665), the smallest root mean square error (34.507), and mean relative error (−9.070%) by greatly reducing the AGB interval for overestimations occurring and significantly increasing the threshold of AGB from 150 Mg/ha to 200 Mg/ha for underestimations. Thus, GWR offered the greatest potential of improving the estimation of Pinus densata forest AGB in Yunnan of southwestern China. [ABSTRACT FROM AUTHOR]

In recent years, the outbreak of the pine shoot beetle (PSB), Tomicus spp., has caused serious shoots damage and the death of millions of trees in Yunnan pine forests in southwestern China. It is urgent to develop a convincing approach to accurately assess the shoot damage ratio (SDR) for monitoring the PSB insects at an early stage. Unmanned airborne vehicles (UAV)-based sensors, including hyperspectral imaging (HI) and lidar, have very high spatial and spectral resolutions, which are very useful to detect forest health. However, very few studies have utilized HI and lidar data to estimate SDRs and compare the predictive power for mapping PSB damage at the individual tree level. Additionally, the data fusion of HI and lidar may improve the detection accuracy, but it has not been well studied. In this study, UAV-based HI and lidar data were fused to detect PSB. We systematically evaluated the potential of a hyperspectral approach (only-HI data), a lidar approach (only-lidar data), and a combined approach (HI plus lidar data) to characterize PSB damage of individual trees using the Random Forest (RF) algorithm, separately. The most innovative point is the proposed new method to extract the three dimensional (3D) shadow distribution of each tree crown based on a lidar point cloud and the 3D radiative transfer model RAPID. The results show that: (1) for the accuracy of estimating the SDR of individual trees, the lidar approach (R2 = 0.69, RMSE = 12.28%) performed better than hyperspectral approach (R2 = 0.67, RMSE = 15.87%), and in addition, it was useful to detect dead trees with an accuracy of 70%; (2) the combined approach has the highest accuracy (R2 = 0.83, RMSE = 9.93%) for mapping PSB damage degrees; and (3) when combining HI and lidar data to predict SDRs, two variables have the most contributions, which are the leaf chlorophyll content (Cab) derived from hyperspectral data and the return intensity of the top of shaded crown (Int_Shd_top) from lidar metrics. This study confirms the high possibility to accurately predict SDRs at individual tree level if combining HI and lidar data. The 3D radiative transfer model can determine the 3D crown shadows from lidar, which is a key information to combine HI and lidar. Therefore, our study provided a guidance to combine the advantages of hyperspectral and lidar data to accurately measure the health of individual trees, enabling us to prioritize areas for forest health promotion. This method may also be used for other 3D land surfaces, like urban areas. [ABSTRACT FROM AUTHOR]