Search

Modeling forest structure using multi-source satellite data is beneficial to understanding the relationship between vertical and horizontal structure and image features to provide more comprehensive and abundant information for the study of forest structural complexity. This study investigates and models forest structure as a multivariate structure based on sample data and active-passive remote sensing data (Landsat8, Sentinel-2A, and ALOS-2 PALSAR) from the Saihanba Forest in Hebei Province, Northern China, to measure forest structural complexity, relying on a relationship-driven model between field and satellite data. In this study, we considered the effects of the role of satellite variables in different vertical structure types and horizontal structure ranges, used two methods to stepwise select significant variables (stepwise forward selection and Pearson correlation coefficient), and employed a multivariate modeling technique (redundancy analysis) to derive a forest composite structure index (FSI), combining both horizontal and vertical structure attributes. The results show that optical texture can better represent forest structure characteristics, polarization interferometric radar information can represent the vertical structure information of forests, and combining the two can represent 77% of the variance of multiple forest structural attributes. The new FSI can explain 93% of the relationship between stand structure and satellite variables, and the linear fit R2 to the measured data reaches 0.91, which largely shows the situation of the measured data. The generated forest structure map more accurately reflects the complexity of the forest structure in the Saihanba Forest, achieving a supplementary explanation of the measured data. [ABSTRACT FROM AUTHOR]

Climate change has resulted in an increase in extreme rainstorm events, posing the challenges of urban waterlogging and runoff pollution. Low Impact Development (LID) is widely used to address the issues above, but its effectiveness is unknown in mountainous areas. Due to a flash flood and high flood peak, storage pumping stations are also needed to drain. Thus, a framework composed of storage pumping stations and Low Impact Developments (LIDs) was proposed based on the topography and the regional upstream and downstream relationships. The water quantity in this framework is applied to YI County in Hebei Province, China. The results showed that individual LIDs effectively reduced runoff volume, with the implementation area being more crucial than the location. Combining storage pumping stations with LIDs significantly reduces peak outflow and delays it by 5 to 51 min. The combined downstream implementation of storage pumping stations and LIDs yielded the most effective results. These findings offer important insights and management strategies for controlling waterlogging in mountainous cities of developing countries. [ABSTRACT FROM AUTHOR]

The southern part of the Hebei Province is one of China's major crop-producing regions. Due to the continuous decline in groundwater level, agricultural water use is facing significant challenges. Precision agricultural irrigation management is undoubtedly an effective way to solve this problem. Based on multisource data (time series soil moisture active passive (SMAP) data, Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) and evapotranspiration (ET), and meteorological station precipitation), the irrigation signal (frequency, timing and area) is detected in the southern part of the Hebei Province. The SMAP data was processed by the 5-point moving average method to reduce the error caused by the uncertainty of the microwave data derived SM. Irrigation signals can be detected by removing the precipitation effect and setting the SM change threshold. Based on the validation results, the overall accuracy of the irrigation signal detection is 77.08%. Simultaneously, considering the spatial resolution limitation of SMAP pixels, the SMAP irrigation area was downscaled using the winter wheat area extracted from MODIS NDVI. The analytical results of 55 winter wheat samples (5 samples in a group) showed that winter wheat covered by one SMAP pixel had an 82.72% growth consistency in surface water irrigation period, which can indicate a downscaling effectiveness. According to the above statistical analysis, this paper considers that although the spatial resolution of SMAP data is insufficient, it can reflect the change of SM more sensitively. In areas where the crop pattern is relatively uniform, the introduction of high-resolution crop pattern distribution can be used not only to detect irrigation signals but also to validate the effectiveness of irrigation signal detection by analyzing crop growth consistency. Therefore, the downscaling results can indicate the true winter wheat irrigation timing, area and frequency in the study area. [ABSTRACT FROM AUTHOR]

The aeromagnetic survey is a common remote sensing tool for detecting iron deposits. The local wavenumber of a magnetic anomaly is used to interpret the edges or positions of the sources, and can involve first- or second-order local wavenumbers. In this paper, we derived a linear equation between the second-order local wavenumber and the source location; therefore, we propose a constraint of first and second-order local wavenumbers. Tests on synthetic data show that the source parameters, computed using a combination of equations that involved different-order local wavenumbers, are closer to the true values and show a smaller spread in estimated values. For gridded data, we proved that the different-order combination allowed us to accurately estimate the source position. When applied to the aeromagnetic data from Hebei province, China, we refined the location of most magnetic features, which we interpreted as possible iron deposits. [ABSTRACT FROM AUTHOR]

ZY-1 02D is China's first civil hyperspectral (HS) operational satellite, developed independently and successfully launched in 2019. It can collect HS data with a spatial resolution of 30 m, 166 spectral bands, a spectral range of 400~2500 nm, and a swath width of 60 km. Its competitive advantages over other on-orbit or planned satellites are its high spectral resolution and large swath width. Unfortunately, the relatively low spatial resolution may limit its applications. As a result, fusing ZY-1 02D HS data with high-spatial-resolution multispectral (MS) data is required to improve spatial resolution while maintaining spectral fidelity. This paper conducted a comprehensive evaluation study on the fusion of ZY-1 02D HS data with ZY-1 02D MS data (10-m spatial resolution), based on visual interpretation and quantitative metrics. Datasets from Hebei, China, were used in this experiment, and the performances of six common data fusion methods, namely Gram-Schmidt (GS), High Pass Filter (HPF), Nearest-Neighbor Diffusion (NND), Modified Intensity-Hue-Saturation (IHS), Wavelet Transform (Wavelet), and Color Normalized Sharping (Brovey), were compared. The experimental results show that: (1) HPF and GS methods are better suited for the fusion of ZY-1 02D HS Data and MS Data, (2) IHS and Brovey methods can well improve the spatial resolution of ZY-1 02D HS data but introduce spectral distortion, and (3) Wavelet and NND results have high spectral fidelity but poor spatial detail representation. The findings of this study could serve as a good reference for the practical application of ZY-1 02D HS data fusion. [ABSTRACT FROM AUTHOR]

Accurate determination of phenological information of crops is essential for field management and decision-making. Remote sensing time-series data are widely used for extracting phenological phases. Existing methods mainly extract phenological phases directly from individual remote sensing time-series, which are easily affected by clouds, noise, and mixed pixels. This paper proposes a novel method of phenological phase extraction based on the time-weighted dynamic time warping (TWDTW) algorithm using MODIS Normalized Difference Vegetation Index (NDVI) 5-day time-series data with a spatial resolution of 500 m. Firstly, based on the phenological differences between winter wheat and other land cover types, winter wheat distribution is extracted using the TWDTW classification method, and the results show that the overall classification accuracy and Kappa coefficient reach 94.74% and 0.90, respectively. Then, we extract the pure winter-wheat pixels using a method based on the coefficient of variation, and use these pixels to generate the average phenological curve. Next, the difference between each winter-wheat phenological curve and the average winter-wheat phenological curve is quantitatively calculated using the TWDTW algorithm. Finally, the key phenological phases of winter wheat in the study area, namely, the green-up date (GUD), heading date (HD), and maturity date (MD), are determined. The results show that the phenological phase extraction using the TWDTW algorithm has high accuracy. By verification using phenological station data from the Meteorological Data Sharing Service System of China, the root mean square errors (RMSEs) of the GUD, HD, and MD are found to be 9.76, 5.72, and 6.98 days, respectively. Additionally, the method proposed in this article is shown to have a better extraction performance compared with several other methods. Furthermore, it is shown that, in Hebei Province, the GUD, HD, and MD are mainly affected by latitude and accumulated temperature. As the latitude increases from south to north, the GUD, HD, and MD are delayed, and for each 1° increment in latitude, the GUD, HD, and MD are delayed by 4.84, 5.79, and 6.61 days, respectively. The higher the accumulated temperature, the earlier the phenological phases occur. However, latitude and accumulated temperature have little effect on the length of the phenological phases. Additionally, the lengths of time between GUD and HD, HD and MD, and GUD and MD are stable at 46, 41, and 87 days, respectively. Overall, the proposed TWDTW method can accurately determine the key phenological phases of winter wheat at a regional scale using remote sensing time-series data. [ABSTRACT FROM AUTHOR]

The understanding of the macro- and micro-structure, particle spectrum parameters, and their evolutions in different parts of stratocumulus clouds based on aircraft observation data, is important basic data for the development of cloud microphysical parameterization schemes and the quantitative retrieval of cloud-precipitation by radar and satellite detections. In this study, a total of ten vertical measurements during three aircraft observations were selected to analyze the vertical distribution of cloud microphysical properties in different parts of stratocumulus clouds in Hebei, North China. It was found that the downdraft in the cumulus cloud area was stronger than that in the stratiform cloud area, with the temperature at the same height higher than that in the stratiform cloud area, and the height of the 0 °C layers was correspondingly higher. In terms of particle spectrum parameters, the intercept and slope parameters of particle spectrum below melting levels in the cumulus part were higher than those in stratiform clouds area in the same weather process. In different vertical detection, it was found that the ice particles have begun to melt in the negative temperature layer near 0 °C level, and there might be sublimation, fragmentation, and aggregation in the melting process of ice phase particles. In addition, the melting process changed the spectral parameters greatly and also changed the correlation between the intercept and slope of the particle spectrum. The slope below the 0 °C level increased with the increase of intercept, which was greater than that above the 0 °C level. The relationship obtained between the intercept parameter of the particle's spectrum and temperature, and the correlation between the maximum diameter and slope parameter of the particle spectrum, have certain reference significance for cloud physical parameterization and the quantitative retrieval of cloud precipitation by radar and satellite in North China and similar climate background areas. [ABSTRACT FROM AUTHOR]

The data assimilation technique is an effective method for reducing initial condition errors in numerical weather prediction (NWP) models. This paper evaluated the potential of the weather research and forecasting (WRF) model and its three-dimensional data assimilation (3DVar) module in improving the accuracy of rainfall-runoff prediction through coupled atmospheric-hydrologic systems. The WRF model with the assimilation of radar reflectivity and conventional surface and upper-air observations provided the improved initial and boundary conditions for the hydrological process; subsequently, three atmospheric-hydrological systems with variable complexity were established by coupling WRF with a lumped, a grid-based Hebei model, and the WRF-Hydro modeling system. Four storm events with different spatial and temporal rainfall distribution from mountainous catchments of northern China were chosen as the study objects. The assimilation results showed a general improvement in the accuracy of rainfall accumulation, with low root mean square error and high correlation coefficients compared to the results without assimilation. The coupled atmospheric-hydrologic systems also provide more accurate flood forecasts, which depend upon the complexity of the coupled hydrological models. The grid-based Hebei system provided the most stable forecasts regardless of whether homogeneous or inhomogeneous rainfall was considered. Flood peaks before assimilation were underestimated more in the lumped Hebei model relative to the other coupling systems considered, and the model seems more applicable for homogeneous temporal and spatial events. WRF-Hydro did not exhibit desirable predictions of rapid flood process recession. This may reflect increasing infiltration due to the interaction of atmospheric and land surface hydrology at each integration, resulting in mismatched solutions for local runoff generation and confluence. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has presented unprecedented disruptions to human society worldwide since late 2019, and lockdown policies in response to the pandemic have directly and drastically decreased human socioeconomic activities. To quantify and assess the extent of the pandemic's impact on the economy of Hebei Province, China, nighttime light (NTL) data, vegetation information, and provincial quarterly gross domestic product (GDP) data were jointly utilized to estimate the quarterly GDP for prefecture-level cities and county-level cities. Next, an autoregressive integrated moving average model (ARIMA) model was applied to predict the quarterly GDP for 2020 and 2021. Finally, economic recovery intensity (ERI) was used to assess the extent of economic recovery in Hebei Province during the pandemic. The results show that, at the provincial level, the economy of Hebei Province had not yet recovered; at the prefectural and county levels, three prefectures and forty counties were still struggling to restore their economies by the end of 2021, even though these economies, as a whole, were gradually recovering. In addition, the number of new infected cases correlated positively with the urban NTL during the pandemic period, but not during the post-pandemic period. The study results are informative for local government's strategies and policies for allocating financial resources for urban economic recovery in the short- and long-term. [ABSTRACT FROM AUTHOR]

The forest canopy height (FCH) plays a critical role in forest quality evaluation and resource management. The accurate and rapid estimation and mapping of the regional forest canopy height is crucial for understanding vegetation growth processes and the internal structure of the ecosystem. A stacking algorithm consisting of multiple linear regression (MLR), support vector machine (SVM), k-nearest neighbor (kNN), and random forest (RF) was used in this paper and demonstrated optimal performance in predicting the forest canopy height by synergizing Sentinel-2 images acquired from the cloud-based computation platform Google Earth Engine (GEE) with data from ICESat-2 (Ice, Cloud, and Land Elevation Satellite-2). This research was conducted to achieve continuous mapping of the canopy height of plantations in Saihanba Mechanical Forest Plantation, which is located in Chengde City, northern Hebei province, China. The results show that stacking achieved the best prediction accuracy for the forest canopy height, with an R2 of 0.77 and a root mean square error (RMSE) of 1.96 m. Compared with MLR, SVM, kNN, and RF, the RMSE obtained by stacking was reduced by 25.2%, 24.9%, 22.8%, and 18.7%, respectively. Since Sentinel-2 images and ICESat-2 data are publicly available, this opens the door for the accurate mapping of the continuous distribution of the forest canopy height globally in the future. [ABSTRACT FROM AUTHOR]

Owing to the various shapes of ice particles, the relationships between fall velocity, backscattering cross-section, mass, and particle size are complicated. This affects the application of cloud radar Doppler spectral density data in the retrieval of the microphysical properties of ice crystals. In this study, under the assumption of six particle shape types, the relationships between particle mass, fall velocity, backscattering cross-section, and particle size were established based on existing research. Variations of Doppler spectral density with the same particle size distribution (PSD) of different ice particle types are discussed. The radar-retrieved liquid and ice PSDs, water content, and mean volume-weighted particle diameter were compared with airborne in situ observations in the Xingtai, Hebei Province, China, in 2018. The results showed the following. (1) For the particles with the same equivalent diameter ( D e ), the fall velocity of the aggregates was the largest, followed by hexagonal columns, hexagonal plates, sector plates, and stellar crystals, with the ice spheres falling two to three times faster than ice crystals with the same D e . Hexagonal columns had the largest backscattering cross-section, followed by stellar crystals and sector plates, and the backscattering cross-sections of hexagonal plates and the two types of aggregates were very close to those of ice spheres. (2) The width of the simulated radar Doppler spectral density generated by various ice crystal types with the same PSD was mainly affected by the particle's falling velocity, which increased with the particle size. Turbulence had different degrees of influence on the Doppler spectrum of different ice crystals, and it also brought large errors to the PSD retrieval. (3) PSD comparisons showed that each ice crystal type retrieved from the cloud radar corresponded well to aircraft observations within a certain scale range, when assuming that only a certain type of ice crystals existed in the cloud, which could fully prove the feasibility of retrieving ice PSDs from the reflectivity spectral density. [ABSTRACT FROM AUTHOR]

Crop yield estimation at a regional scale over a long period of time is of great significance to food security. In past decades, the integration of remote sensing observations and crop growth models has been recognized as a promising approach for crop growth monitoring and yield estimation. Optical remote sensing data are susceptible to cloud and rain, while synthetic aperture radar (SAR) can penetrate through clouds and has all-weather capabilities. This allows for more reliable and consistent crop monitoring and yield estimation in terms of radar sensor data. The aim of this study is to improve the accuracy for winter wheat yield estimation by assimilating time series soil moisture images, which are retrieved by a water cloud model using SAR and optical data as input, into the crop model. In this study, SAR images were acquired by C-band SAR sensors boarded on Sentinel-1 satellites and optical images were obtained from a Sentinel-2 multi-spectral instrument (MSI) for Hengshui city of Hebei province in China. Remote sensing data and ground data were all collected during the main growing season of winter wheat. Both the normalized difference vegetation index (NDVI), derived from Sentinel-2, and backscattering coefficients and polarimetric indicators, computed from Sentinel-1, were used in the water cloud model to derive time series soil moisture (SM) images. To improve the prediction of crop yields at the field scale, we incorporated remotely sensed soil moisture into the World Food Studies (WOFOST) model using the Ensemble Kalman Filter (EnKF) algorithm. In general, the trend of soil moisture inversion was consistent with the ground measurements, with the coefficient of determination (R2) equal to 0.45, 0.53, and 0.49, respectively, and RMSE was 9.16%, 7.43%, and 8.53%, respectively, for three observation dates. The winter wheat yield estimation results showed that the assimilation of remotely sensed soil moisture improved the correlation of observed and simulated yields (R2 = 0.35; RMSE =934 kg/ha) compared to the situation without data assimilation (R2 = 0.21; RMSE = 1330 kg/ha). Consequently, the results of this study demonstrated the potential and usefulness of assimilating SM retrieved from both Sentinel-1 C-band SAR and Sentinel-2 MSI optical remote sensing data into WOFOST model for winter wheat yield estimation and could also provide a reference for crop yield estimation with data assimilation for other crop types. [ABSTRACT FROM AUTHOR]