1,705 results
Search Results
2. Laser-induced graphene based triboelectric nanogenerator for smart electronic device
3. High performance Ca3−xAg0.3LaxCo4O9 materials for aerospace applications of thermoelectric devices
4. Green synthesized AgNPs entrapped in polymer hydrogels for azo dye degradation
5. Composition design, microstructure and mechanical properties of bismuth-doped In–Sn-based low-temperature solder alloy
6. Exploring multi-dimensional properties: field emission and electrochemical response of MoS2 nanoflowers on carbon cloth
7. Machine learning-based prediction and experimental validation of electrospun PVDF fibers: unraveling the dynamics and control of the β-phase
8. Sustainable polyaniline/lignin blends for application in supercapacitors
9. Incorporating pre-stretching into electroless copper plating for conductivity improvement of elastic nylon fabric: application in ECG electrode
10. Investigation of multiferroic properties of binary compounds barium titanium yttrium ferric oxide
11. Scalable synthesis of binder-free MXene based electrode for green hydrogen production
12. Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries
13. P-doped g-C3N4 with triple calcinations for enhancing photocatalytic performance
14. Structural and electronic characterization of the precipitate phase in deformed Cu–13.81%Mn–3.78%Al alloy
15. ZIF-67 with rhombic dodecahedron structure for enhanced humidity sensor operating at room temperature
16. Impact of Neodymium substitution on electrical properties in mixed phase of Bismuth containing pyrochlore (Bi2Sn2O7 and Bi2O3–SnO2)
17. Fabrication and characterization of modulation-doped β-(AlxGa1−x)2O3/Ga2O3 tri-metal FET utilizing ultra-high vacuum deposition based on plasma-assisted molecular beam epitaxy
18. Optical properties and structural rigidity of [(GeSe2)75(Sb2Se3)25]100−xTex chalcogenide glasses for potential applications in infrared filters and lenses
19. Characterization of electrical and mechanical properties of Pandanus Atrocarpus flexible organic-based substrate for microwave communication in ISM applications
20. Effect of BNT on piezoelectric and energy storage characteristics of piezoelectric ceramics and its application in underwater acoustic transducer
21. Constructions of NiCo2S4@rGO composite for use as a low-cost counter electrode material in dye-sensitised solar cells
22. Ionic liquid (1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate) doped polyethylene polymer electrolyte for energy devices
23. Gas sensing capabilities of sol–gel dip-coated pure SnO2 thin films for CO and C3H8 detection
24. Influence of Bi2O3, PbO, and Y2O3 nanofillers on the physical features of polyvinyl chloride: materials for optoelectronics or dielectric applications
25. Successful electric field modulation to enhance DC and RF features in SOI LDMOS transistors using a β-Ga2O3 film
26. The influence of rGO and GO nano plates on structural, optical and magnetic properties of SnFe2O4 nanocomposites synthesised by sol–gel, microwave and co-precipitation methods
27. Optimization of soft magnetic properties of Fe–Si–B–Cu–C alloys by modulation of Fe/B content and annealing process
28. Feasibility and performance of TiCN-based patch antennas for microwave antenna applications
29. Modulation of anti-corona properties by ZnO nanoparticles and SiO2 nanoparticles
30. Obviously decreased hysteresis index originated from enhanced grain size with ETL modification for improved performance of perovskite solar cells
31. The influence of surface damage removal on the performance of silicon diode
32. Improvement of piezoelectric and dielectric properties and expansion of stably working temperature range of KNN-based crystals through Li-doping
33. Free air ball and bondability behaviours of Au-coated Ag alloy wire at various electro flame-off and bonding parameters for CMOS iBGA
34. Sintering of Cu particles baked by formic acid vapor for Cu–Cu low temperature bonding
35. Optimizing the electrochemical properties of PPy/ZnO nanocomposites for supercapacitor electrode
36. Impact of pre and post-perovskite infiltration treatments on monolithic perovskite solar cell performance
37. A novel far-red and near-infrared adjustable phosphor Sr9Al(PO4)7:Cr3+: structure and luminescence properties
38. Finite element method and experimental study on life prediction of lead-free BGA solder joints using an energy-based approach
39. The solid-phase ion-plasma method and thermoelectric properties of thin CrSi2 films
40. Microstructural and excess conductivity properties of Y-123: effect of organic polymer chitosan inclusion
41. The annealing effect on the performance of flash-sintered ZnO–Bi2O3–Sb2O3-based varistors
42. Near infrared emission in Nd3+ and Nd3+/Yb3+co-doped LiY(WO4)2 phosphor
43. Evaluation of the shielding effectiveness of electrodeposited Zn–Ni, Zn–Co, Ni–Co, and Zn–Ni–Co alloy coatings
44. Fluorine-doped graphene composite hydrogels with high bulk density for supercapacitors application
45. Controllable preparation and properties of boron-doped carbon aerogel composites
46. Highly sensitive triethylamine gas sensor based on CeO2-modified Au–ZnO
47. La:ZnO nanoparticles: an investigation on structural, optical, and microwave properties
48. Effect of concentration of electrolyte on thermoelectric properties of electrodeposited Bi2Te3 thin films
49. Study of the effect of Sr2+ ions substitution on the dielectric behaviour of BaCr2O4 chromites synthesized by solution combustion method
50. Synthesis, characterization, and unveiling dielectric spectroscopy insights of Fe3Se4 and Fe7Se8 nanoparticles
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.