Search

A sewer system is a principal element of infrastructure in modern cities, accounting for massive amounts of public investments. Corrosion of manholes in the sewer system is a global issue, and millions of dollars are being spent on the maintenance, restoration, and replacement of deteriorated sewer networks. Concrete manholes in the sewer system are deteriorating due to the attack of sulfuric acid produced by microorganisms in a process termed microbial induced concrete corrosion (MICC), which reduces the lifespan of concrete sewer elements. The objective of this paper is to investigate the correlation between the gas- and liquid-phase sewer environmental factors and hydrogen sulfide concentration in the gas phase. The production, emission, and build-up of hydrogen sulfide gas in manholes is identified as a major cause of MICC in manhole shafts. The field study was conducted in more than 200 manholes in the City of Arlington (Texas, US). The data was collected every minute for 48 h to understand the trends of liquid- and gas-phase parameters such as hydrogen sulfide (H2S concentration), liquid and gas temperature, pH, DO, and relative humidity. The study also examines how gas-phase H2S concentrations vary with season; manhole design, including manholes' depth, slope, and presence of drop; and sewer flow conditions such as velocity and turbulence. Although no strong linear correlation was found between liquid-/gas-phase parameters, the manhole categories were found to play a significant role in H2S generation. The manholes with hydraulic jump generated the highest average H2S concentrations, followed by manholes with drops. High turbulence zones were observed in manholes of both categories, leading to H2S stripping from liquid to gas phase. The highest H2S concentration was recorded in summer, suggesting that higher liquid temperature resulted in increased bacterial activity, which generated greater liquid-phase sulfide. Greater Henry's law constants in summer, due to high temperatures, would have favored transfer of liquid-phase sulfide to the gas phase. [ABSTRACT FROM AUTHOR]

Bacterial levels in Buffalo Bayou in Houston commonly exceed contact recreation standards. Potential sources of bacteria include wastewater treatment plants, sanitary sewer overflows, septic systems, wet and dry nonpoint-source discharges via direct runoff and pipes, direct deposition, and sediment. A water-quality model in the Hydrologic Simulation Program-FORTRAN (HSPF) was calibrated and validated for hydrology, sediment, and Escherichia coli and subsequently used to evaluate the impacts of the bacterial sources in the watershed. In addition, simple estimates of bacterial loads were calculated along with source evaluations from load duration curves. Load reductions based upon the simple estimates indicated that water-quality standards were met by reducing dry-weather indicator bacterial loads by 69% and wet-weather loads by 98%. When these load reductions were implemented in the HSPF model, however, standards were not met under dry-weather conditions. Residual nonpoint-source loading was found to cause the discrepancy between simple load estimate calculations and the developed water-quality model. This paper demonstrates that runoff can play a significant role in maintaining high levels of bacteria under all flow conditions and that understanding the temporal variations in bacterial source loading is critical to ensure that load reductions will achieve water-quality standards. [ABSTRACT FROM AUTHOR]

The model developed in this paper, the bacteria loading estimator spreadsheet tool (BLEST), was designed as an easy to use indicator bacteria model that can overcome the shortcomings of many of the simpler total maximum daily load (TMDL) modeling approaches by integrating spatial variation into load estimates. BLEST was applied to the Buffalo Bayou watershed in Houston, Texas and incorporated loading from point and nonpoint sources, such as wastewater treatment plants, sanitary sewer overflows, septic systems, storm sewer leaks, runoff, bed sediment resuspension, and direct deposition. The dry weather Escherichia coli load in Buffalo Bayou was estimated using BLEST to be 244 billion MPN/day and would require an overall 48% reduction to meet the contact recreation standard, while wet weather loads would need to be reduced by 99.7%. Dry weather loads were primarily caused by animal direct deposition, septic systems and discharges from storm sewers under dry weather conditions, while wet weather loads were mostly attributable to runoff and resuspension from sediment. Unlike most simple TMDL load allocation strategies, BLEST can be used to evaluate spatially variable load reduction strategies. For example, septic system load reductions implemented in less than 10% of the subwatersheds resulted in a decrease in bayou loading of more than 20%. [ABSTRACT FROM AUTHOR]