Search

The production of paper is a key component for global civilization. Around 300 million tonnes of paper are produced every day globally, with matured pulpwood being the major contributor. Due to rising demand for paper and the depletion of available wood resources, researchers are now focused on finding alternative non-wood resources that are suitable for pulp and paper production. The current study aims to produce eco-friendly and biodegradable paper using a combination of Eichhornia crassipes (water hyacinth) and dried flowers. Water hyacinth is considered as a lignocellulose plant which contains 57% lignocellulose, and dried flower contains 40% cellulose, which is the prime source for paper production. Various sections of water hyacinth, including wet and dry petiole, leaves, and root, were blended with dried flowers through the soda process. Then, the physical properties and FTIR analysis was carried out to identify the quality of the paper produced. The paper produced from root and dried petiole has a lower thickness (1.0 mm and 0.5 mm) than other mix proportions. The opacity of the leaves was found to be 0.5% (light passing) and for the root 0.7% (light passing). Also, the dry petiole and root paper have a good dry tensile strength of 1.30Kpa and 1.20Kpa, respectively. Hence, paper made from dry petiole and root was found to be efficient and suitable for the paper industry. [ABSTRACT FROM AUTHOR]

Green liquor dregs (GLD) is an alkaline by-product from the pulp and paper industry with a pH between 10 and 14. Today most of the produced GLD in Sweden is landfilled. As a fine-grained alkaline material, it might be possible to use it for acid-generating mining waste remediation. To increase the utilization, quality characteristics and environmental performance need to be determined. In this study samples were collected 5 times from 16 mills during a period of 2.5 years, and were characterized by analyzing dry matter content, loss on ignition (LOI) 550 °C and LOI 950 °C, elemental analysis, pH, electrical conductivity, and calorific value. The results were then evaluated using multivariate statistics (PCA) as well as being compared to other studies and Swedish till. The results show that even if GLD is heterogenous (both within a mill and between different mills) trends can be seen for samples from most mills. When samples do stand out, it is predominately related to the same four mills. Most of the studied parameters showed characteristics favorable for use as a remediant; however, TOC, sulfur, and some of the elements require further study. In general, this study concludes that GLD can be a viable option for the remediation of small orphaned sulfidic mining sites and thus worthy of further studies on the interaction between GLD and acidic mining waste. Overall, GLD can be a good alternative for cost-effective remediation of smaller orphaned mining sites. It is readily available in large quantities, has the qualities needed for remediation of many orphaned acidic mining sites, and can often be locally sourced near the mining site. The use of GLD for mining site remediation is likely also a more sustainable method compared to traditional remediation methods. [ABSTRACT FROM AUTHOR]

Paper mill sludge (PMS) is featured with a high content of cellulose and hemicellulose, and using its characteristics to make paperboard can achieve a high-value utilization of PMS, which has attracted growing interest. In this study, currently prevalent landfill, incineration technologies (generating heat and electricity by incineration), and three paperboard technologies (medium density fiberboard, pulp board, and corrugated paper) were evaluated and compared via life cycle assessment (LCA) and life cycle costing (LCC) methods. LCA results show that the PMS-to-pulp board outperforms others with an energy conservation and emission reduction (ECER) value of − 2.86 × 10−8, while the landfill exhibits the highest overall environmental impact with an ECER value of 4.80 × 10−9. LCC results reveal that the PMS-to-pulp board delivers the highest economic profit with $257.357, while the landfill is the lowest with $ − 35.63. The PMS paperboard technologies are more economically friendly than the incineration technologies due to additional electricity/steam consumption during the PMS pre-drying process in incineration. In addition, different scenarios were set up to explore national GHG emission reduction potential by increasing paperboard technologies application rate and reducing the proportion of landfill and incineration. The scenario analysis suggests that replacing 90% of landfill and incineration ratio with PMS paperboard technologies could tremendously improve the overall emission reduction performance with − 9.08 × 1010 kg CO2 eq. This result indicates that the PMS treatment technology transformation has a significant favorable impact on the achievement of the "carbon neutrality" target. [ABSTRACT FROM AUTHOR]

Globally, per- and polyfluoroalkyl substances (PFAS)–related research on paper products has focused on food packaging with less consideration on the presence of PFAS at different stages of the paper recycling chain. This study analysed the prevalence of PFAS in paper grades used for the manufacture of recycled paperboard. The presence of PFAS was attributed to the use of PFAS-containing additives, consumer usage, exposure to packed goods as well as contamination during mingling, sorting, collection, and recovery of paper recycling material. Q Orbitrap mass spectrometry was used to analyse the paper samples after accelerated solvent extraction and solid phase extraction. The distribution and possible propagation of 22 PFAS were determined in pre-consumer, retail and post-consumer paper products. Post-consumer samples had the highest combined average concentration (ΣPFAS) at 213 ng/g, while the ΣPFAS in retail (159 ng/g) and pre-consumer samples (121 ng/g) was detected at lower concentrations. This study showed that waste collection and recycling protocols may influence PFAS propagation and that measures must be developed to minimise and possibly eliminate exposure opportunities. [ABSTRACT FROM AUTHOR]

To overcome the human and animal survivability risk, sustainable development is the only option on earth that can be achieved through the maximum use of renewable environmental resources. Recycling of waste paper is an emerging waste management approach to conserve natural resources. Herein, we studied enzyme-mediated process to recycle the xerographic paper by using the crude fungal extract from indigenously isolated fungi identified as Aspergillus assiutensis. The fungal enzyme cocktail has been characterized for the production of multiple enzymes namely cellulase, amylase, xylanase, pectinase, and protease. All these enzymes have pH optima in the acidic range and except cellulase and all the enzymes are stable from 10 to 80 C. In the zymogram analysis, pectinase, xylanase, amylase, and cellulase were detected at 68 kDa, ~ 54 kDa, 38 kDa, and 30 kDa, respectively. Also, the presence of protease was confirmed by the clear zone at 68, 31, and 16 kDa. A 26% decrease in the kappa number and reduction in Hex A of the pulp was observed on the treatment of the pulp with enzyme as compared to the control pulp without any treatment. The physical and chemical properties of the pulp were also improved by enzyme-mediated pulping as compared to the control The physiochemical parameter of the effluent like TDS was reduced (397 ppm) significantly in comparison to chemical deinking process and it was within the permissible limit. BOD and alkalinity were reduced when the enzymes and chemical dosage were used in combination. These results indicate that chemi-enzymatic deinking is most promising to reduce or remove the pollution parameters including ink and this approach can be used in the paper and pulp industry for sustainable development. [ABSTRACT FROM AUTHOR]

The environmental and energy impacts of ICT were identified using a comparative life cycle assessment (CompLCA) focused on business invoicing processes comparing online to paper processes. There were net energy benefits from online billing. The potential impact across the economy and society is large, particularly as COVID-19 has forced many businesses and government services to shift to online service provision. For one million bills produced electronically and received by customers instead of a paper bill, 18.9 t CO2e is avoided, which translates to a national saving of 22,680 tCO2e, assuming 1.2 billion annual invoicing transactions. The impacts of CO2 are sensitive, however, to several assumptions. The study's originality was to show the range of invoicing variables that impact energy and the environment and to highlight which ones can be influenced. For example, the number of online bills produced was the most sensitive. However, the results are reversed under commonly occurring customer use situations. The study demonstrates the positive and negative impacts from the digitalisation of businesses. It suggests remedies based on the main drivers identified under company, contractor and customer control that led to energy consumption and environmental and land use impacts. [ABSTRACT FROM AUTHOR]

Apart from protecting the environment from undesired waste impacts, wastewater treatment is a crucial platform for recovery. The exploitation of suitable technology to transform the wastes from pulp and paper industries (PPI) to value-added products is vital from an environmental and socio-economic point of view that will impact everyday life. As the volume and complexity of wastewater increase in a rapidly urbanizing world, the challenge of maintaining efficient wastewater treatment in a cost-effective and environmentally friendly manner must be met. In addition to producing treated water, the wastewater treatment plant (WWTP) has a large amount of paper mill sludge (PMS) daily. Sludge management and disposal are significant problems associated with wastewater treatment plants. Applying the biorefinery concept is necessary for PPI from an environmental point of view and because of the piles of valuables contained therein in the form of waste. This will provide a renewable source for producing valuables and bio-energy and aid in making the overall process more economical and environmentally sustainable. Therefore, it is compulsory to continue inquiry on different applications of wastes, with proper justification of the environmental and economic factors. This review discusses current trends and challenges in wastewater management and the bio-valorization of paper mills. Lignin has been highlighted as a critical component for generating valuables, and its recovery prospects from solid and liquid PPI waste have been suggested. [ABSTRACT FROM AUTHOR]

Recycled paper pulping wastewater (RPPW) will cause serious environmental problems due to the high loads of dissolved organic matter (DOM) and toxic components. In the present work, the degradation of DOM in the biologically treated RPPWs (cardboard wastewater (CW) and corrugated container wastewater (CCW)) by a combined coagulation and ozonation process was investigated. The optimal chemical oxygen demand (COD) removal of CW reached 73.64% at aluminum sulfate (Al2(SO4)3) dosage of 800 mg/l, aeration aperture of 10 μm, pH of 9, hydrogen peroxide (H2O2) dosage of 100 mg/l, and reaction time of 70 min. The optimal COD removal of CCW reached 55.76% at a poly-aluminum chloride (PAC) dosage of 700 mg/l, H2O2 dosage of 140 mg/l, and reaction time of 50 min. This study provided some insights into the change of DOM during the combined treatment through the use of UV–Vis spectroscopy and excitation-emission matrix spectroscopy (EEM). PAC and Al2(SO4)3 removed high molecular weight organic such as lignin and lignin-derived compounds to improve the biodegradability of the wastewater. Ozone oxidized high molecular weight organic with complex functional groups to low molecular weight organic with simple functional groups and even mineralization, and this phenomenon resulted in the COD of ozonation effluent significantly reduced. Thus, the results presented in this study support the application of the combined coagulation and ozonation process in treating RPPW. [ABSTRACT FROM AUTHOR]

Toilet paper has been reported as one of the major insoluble pollutant components in the influent of wastewater treatment plants. Toilet paper fibers contribute to a large production of sewage sludge, resulting in a high treatment cost and high energy consumption. To find energy-efficient, cost-effective, and environment-friendly technologies for fiber removal and resource recovery from wastewater, a life-cycle assessment (LCA) was performed to analyze the wastewater treatment processes, including a sieving process for removing and recovering suspended solids before the biodegradation units. Based on the LCA results, it was estimated that the sieve screening process saved 8.57% of energy consumption. The construction phase of sieving consumed 1.31% energy cost compared with the operation phase. Environmental impact analysis showed that sieving reduced the impacts of climate change, human toxicity, fossil depletion, and particulate matter formation, which reduced the total normalized environmental impacts by 9.46%. The life-cycle analysis of the removal of toilet paper fibers from wastewater revealed the need to use more efficient methods to enhance the recovery of cellulose fibers. [ABSTRACT FROM AUTHOR]

China's pulp and paper industry (CPPI) has been always the main carbon emission source in recent years. However, the analysis on influencing factors of carbon emissions from this industry is insufficient. To address the issue, the CO2 emissions from CPPI are estimated in the period of 2005–2019, the driving factors of CO2 emissions are investigated by the logarithmic mean Divisia index (LMDI) method, the decoupling state of economic growth and CO2 emissions is determined by Tapio decoupling model, and finally, future CO2 emissions are predicted under four scenarios by the STIRPAT model to explore the potential of carbon peaking. The results show that CPPI exhibits a rapid increase and a fluctuating downward trend in CO2 emissions during the period of 2005–2013 and 2014–2019, respectively. The main promoting and inhibiting factors to the increase of CO2 emission are per capita industrial output value and energy intensity, respectively. There are five decoupling states of CO2 emissions and economic growth during the study period, and the CO2 emissions exhibit a weak decoupling state with the industrial output value growth in most years of the study period. It is very difficult to realize the carbon peaking goal by 2030 under the baseline and fast development scenarios. Therefore, efficient low carbon and strong low-carbon development policies are necessary and urgent for the realization of carbon peaking goal and the sustainable development of CPPI. [ABSTRACT FROM AUTHOR]

Paper for recycling has become a promising raw material for the pulp and paper industry due to its low cost and because it is conducive to sustainable development. Unfortunately, recycled paper contains a high volume of printed paper that is difficult to deink, which restricts its applications. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This study was performed to evaluate the deinkability of environmentally friendly offset inks by flotation deinking. For this purpose, three mineral oil free series of four-color inks, namely, hybrid light emitting diode ultraviolet (LED–UV), LED–UV, and vegetable oil-based inks, were printed on white lightweight coated papers under laboratory conditions. The deinking methodology involves repulping, deinking agent treatment, flotation, hand sheet making, and evaluation of the produced hand sheets. The obtained results indicated that the hybrid LED–UV prints had the best deinkability. After flotation deinking, the deinking efficiency and the whiteness of the hybrid LED–UV ink increased by 58.1% and 47.6%, respectively. LED–UV ink had a 46.9% increase in the deinking efficiency and a 37.0% increase in the whiteness of the hand sheet. The deinking efficiency of the vegetable oil-based ink was the lowest, at 42.1%, and the whiteness of the hand sheet increased only by 23.8%. The particle size distribution analysis demonstrated that the hybrid LED–UV four-color ink exhibited a larger value of the average particle size than the two other. Scanning electron microscopy revealed that the hybrid LED–UV ink particles on the surface of the fibers were the least abundant after deinking. The physical strength properties of the hand sheets, including tensile index, folding resistance, and interlayer bonding strength of the hybrid LED–UV, LED–UV inks, and vegetable oil-based inks, increased. [ABSTRACT FROM AUTHOR]

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking. [ABSTRACT FROM AUTHOR]

Waste management is the protection of the environment and the health of the population. Paper waste sludge is produced during paper production and sepiolite is a natural clay mineral. The aim of the study was to investigate the usability of sepiolite-added paper waste sludge as a bedding material in the broiler production. Two hundred eighty-eight 1-day old male broiler chicks were divided into the 6 bedding material groups (wood shavings (control), paper waste sludge, sepiolite, mix of 25% paper waste sludge and 75% sepiolite, mix of 50% paper waste sludge and 50% sepiolite, and mix of 75% paper waste sludge and 25% sepiolite) with 6 replicate pens per group. Litter quality, performance, and some welfare parameters of broilers were assessed during the 6 weeks' period. Body weight at 42 days of age and body weight gain from 0 to 42 days of broilers reared on the wood shavings and mix of 50% paper waste sludge and 50% sepiolite were found higher than those of the sepiolite and paper waste sludge groups. Feed consumption and feed to gain ratio from 0 to 42 days, yields of carcass and carcass parts, percentages of organs and abdominal fat, IgG, percentage of bursa Fabricius, burns of foot pad and breast, litter pH and meat properties of broilers reared on the wood shavings, paper waste sludge, and sepiolite litter groups were not found to be statistically different. Litter moisture was found higher in the paper waste sludge group than that in the sepiolite group at the 42 days of rearing. As a conclusion, usage of mix of 50% paper waste sludge and 50% sepiolite as a litter does not have any negative effects on performance, welfare, and litter quality. This result is important in terms of utilizing a waste product. [ABSTRACT FROM AUTHOR]

The quest for cost-effective and thermal efficient structural materials onto beating the high cost of construction is gaining more attention among researchers. This study focused on the blending of cement and sand with waste paper pulp into cost-effective structural materials. The composites were prepared in four mix groups with each containing a fixed amount of sand at 5, 10, 15, and 20 wt.% (by weight of pulp). Cement was varied at 10, 20, 30, and 40 wt.% in each group, and curing was done for 28 days. Properties evaluated are compressive, bending, and splitting strengths. It was observed that increasing cement and sand contents enhanced strengths; howbeit, the blend of 30 wt.% cement/15 wt.% sand resulted in a reduction in bending strength even as 30 wt.% cement/20 wt.% sand engendered a decrease in bending and splitting strength. The microstructural features showed that inherent fibers of the pulp were well bonded with hydration products and sand content yielding good performance in the composites. The optimization procedure carried out depicted a combination of 35.27% cement and 20% sand as the optimum composition. Experimental outcomes were modelled for the purpose of prediction of responses. The models were confirmed statistically fit showing how varying cement content affected strength responses at fixed sand proportion. ANOVA affirmed the significant contribution of cement and sand on the strength responses. Compliance reliability was observed to be dependent on the interactive pattern between cement and sand. Going by the standard prescription for the strength properties, cement and sand content of 35.27 and sand 20 wt.% satisfied all strength requirements for low-cost construction having a compliance reliability of 1.31. [ABSTRACT FROM AUTHOR]

The uses of natural dyes are getting popularized due to the increased awareness regarding the toxicity of many chemical colorants. The chemical colorants are being replaced by the natural colorants for the various industrial applications. The plant-based natural colorants are considered eco-friendly and toxic free. In the present study, we report a natural dye from the heartwood of Caesalpinia sappan suitable for paper based packing materials. This forms the first report on the study of natural dye obtained from the heartwood of C. sappan on paper material. The extracted dye had a good photostability and able to make imprints on recycled paper bags. Moreover, a significant inhibition of bacterial growth was observed at a higher dye concentration of 100 μg mL−1 against P. aeruginosa which was higher than the standard antibiotics. Growth inhibition was also observed in case of B. subtilis (22 ± 0.17 mm) and K. pneumonia (21 ± 0.53 mm) at 100 μg mL−1. The dye could be used in making medicated packing materials and have many other bio-potential which was validated through in silico toxicity analysis. The application of such natural dyes in paper material value addition will help in a cleaner and sustainable process during paper recycling. [ABSTRACT FROM AUTHOR]

Nowadays, the paper industry supplies its required fibers either from primary fibers, including wood and plants, or waste papers, called secondary fibers. One of the most challenging recycling processes is deinking of papers digitally printed with electrophotographic ink. In order to produce optically high-quality paper from recycled waste papers, deinking step is required at the desired levels. In this work, the environmentally friendly green enzymatic deinking of printed paper was modeled and optimized via an innovative approach called artificial intelligence method. The effect of treatment temperature, treatment time, and enzyme dosage on mechanical properties (tensile and burst strengths) as well as optical properties (whiteness and brightness) of handsheet was investigated. The developed code can appropriately learn the non-linear behavior of deinking process, and make decisions according to the pattern constructed intelligently. Finally, multi-objective optimization at the specified treatment temperature, treatment time, and enzyme dosage was performed to identify the best conditions for enzyme-deinked handsheet (maximized mechanical and optical properties). [ABSTRACT FROM AUTHOR]

The efficiency of xylano-pectinolytic enzymes, co-produced by a single microbial strain Bacillus pumilus, was analysed for the recycling of mixed office waste paper through deinking and compared with the alkaline chemical deinking method. Enzymes showed maximum deinking at pH 8.5, pulp consistency of 10%, xylanase-pectinase dose of 12 and 4 IU per gram pulp, respectively, after 120 min of deinking period, and temperature at 50 °C. A chemi-enzymatic approach was employed with xylano-pectinolytic enzymes and various concentrations of deinking chemicals, which showed that enzyme-treated mixed office waste pulp requires only 40% chemicals for deinking, in order to get the almost same level of various handsheets properties, as obtained by the chemical method with 100% chemicals. Similarly, the effluent load of BOD and COD contents was also decreased by 17.90 and 19.75%. This combinational approach of deinking significantly improved the various properties of the handsheets and resulted in gain of 7.5, 9.38, 6.33 and 11.65% in tear factor, burst factor, breaking length and viscosity of the handsheets, while the effective residual ink concentration analysis of deinked handsheets of mixed office waste paper showed deinking efficiency of 22.45%, which revealed the removal of ink particles during enzymatic deinking steps. [ABSTRACT FROM AUTHOR]

Concerns about human health regarding the large use of bisphenol A in thermal papers have led to its replacement by bisphenol S. Analyses of bisphenols require several sample pretreatment steps, which are laborious, expensive, and time-consuming. A paper spray ionization mass spectrometry (PSI-MS) was developed to detect and quantify bisphenol S in three different brands of thermal papers commercially available. Parameters such as paper size, and paper position relative to the mass spectrometer inlet were evaluated. The analyses were performed in selected ion monitoring mode on a linear ion trap mass spectrometer. The developed method presented absolute recovery values ranging from 92.2 to 109.04%, accuracy values from −1.2 to 9.0%, and inter assay precision from 1.8 to 5.6% and enabled LOD as low as 5 ng g−1. The concentration of bisphenol S in all of the three brands of BPA-free thermal papers evaluated ranged from 1.36 to 6.77 μg g−1, and the concentrarion of BPA ranged from 6.56 to 16.4 μg g−1 in all samples of thermal paper evaluated. The PSI-MS method described here was comparable to the conventional ones, such as liquid chromatography coupled with mass spectrometry and gas chromatography coupled with mass spectrometry described in the literature. The present study proved to be practical, fast, and efficient for the direct determination of bisphenol S in thermal papers. Furthermore, the methodology here described showed to be a promising alternative to replace the classical methods for determination of bisphenol S, due to its simplicity, and no needing of any sample pretreatment. [ABSTRACT FROM AUTHOR]

In this work, the effect of using Ag-doped TiO2 nanopigments on optical, mechanical and antimicrobial properties of coated paper was explored. Furthermore, the long-term antimicrobial activity of the coated paper was examined for up to 25 years. Titanium dioxide (TiO2) nanoparticles have been synthesized and doped with different percentages of Ag nanoparticles (Ag NPs) using a simple wet chemical approach. The Ag@TiO2 modified nanopigments were in the form of nanorods with an average size of about 20 nm as observed from TEM images. Increasing Ag content from 0.01 to 1.0% showed an increase in the mechanical properties of coated paper in terms of tensile, stretching, tensile energy absorption and burst while preserving the optical properties. Moreover, the antimicrobial inhibition activity increased with increasing the Ag content. The 1% Ag@TiO2 showed a long-lasting antimicrobial effect against Staphylococcus aureus (S. aureus) Gram-positive bacteria even after 25 years of ageing (93.4% inhibition). Investigation of reactive oxygen species (ROS) generation and reaction mechanism of antimicrobial activity over Ag/TiO2 under visible light is proposed. These results suggest that Ag/TiO2 NPs can be potentially used as a disinfection coating for paper and improving its mechanical properties. [ABSTRACT FROM AUTHOR]

To ensure the safety of food contact materials, a liquid chromatography method was established to determine the migration of formaldehyde in paper packaging with various food simulants (10%, 25%, 50%, 75%, and 95% ethanol by volume) and to investigate the migration behavior of formaldehyde after various durations and with various materials. The results showed that the method has good linearity with a correlation coefficient of R2 > 0.9990, a detection limit of 0.0011 ~ 0.0027 mg L−1, and a spiked recovery of 89.7 ~ 103.2% in the range of formaldehyde determination; the migration of formaldehyde in all six paper contact materials showed a trend of gradual increase with time until equilibrium was reached. At the same time and temperature, the migration of formaldehyde in paper packaging was the highest in low-concentration ethanol. With the same food simulants and materials, the maximum migration of formaldehyde in printed materials was greater than that in nonprinted materials; with different materials and the same food simulant, the thickness value was higher, with the use of water-based ink as a printing material, and the maximum migration value of formaldehyde by offset printing technology was low. [ABSTRACT FROM AUTHOR]

An essential requirement for colorimetric paper-sensor is to allow the target analytes (heavy metal ions) to access the chromophore while maintaining strong chromophore immobilization on the porous substrate surface. This work evaluates the selection of sensitive chromophores (dithizone, 1-(2-pyridylazo) 2-naphthol and 4-(2-pyridylazo)-resorcinol) and their immobilization strategies on paper sensors. Dithizone (DTz) are capable of producing a significant color transition at unadjusted pH, observed by UV–Vis absorption spectroscopy and visible recognition. After immobilizing DTz on a paper substrate (cellulose acetate/chitosan substrate), the DTz-paper sensor showed a distinctive color change from blue-green to peach-pink upon reaction with Pb2+ ions, and the color intensity was proportional to the metal concentration. Quantitative analysis using RGB (R:Red; G:Green; B:Blue) plots showed that increasing DTz concentration on the CA/CS paper sensor increases the difference in total color intensity (∆IT) and the difference in red code intensity (∆IR). This is due to the formation of more DTz-Pb2+ complexes on the CA/CS paper substrate. The CA/CS paper strips immobilized with 100 ppm DTz showed practical potential for rapid detection of heavy metal ions. The DTz-CA/CS paper sensor showed significant color change when detecting spiked heavy metals ions (0.1 ppm Pb2+, 2.0 ppm Zn2+, and 0.2 ppm Cu2+) in river water samples that prepared at the maximum permissible limit for industrial effluent in Malaysia. [ABSTRACT FROM AUTHOR]

Low pressure reverse osmosis (LPRO) has been increasingly used in advanced treatment of pulp and paper wastewater (PPWW) for the purpose of water reuse. However, membrane fouling is a major problem encountered by full-scale RO systems due to the organic and inorganic contents of the feedwater. Electrocoagulation (EC) as an effective treatment for foulants removal can be applied in pre-filtration. Therefore, the LPRO membrane fouling mechanism and the membrane fouling control performance by EC treatment were investigated in this study. EC pretreatment could reduce the membrane fouling and improve the membrane flux by 31%, by effectively removing and/or decomposing the organic pollutants in PPWW. Fluorescent spectrometry analyses of the feedwater and the permeate revealed that humic acid-like and fulvic acid-like organics in PPWW were the major foulants for the LPRO membranes. Fourier transformation infrared spectrometry results confirmed that the organic foulants contained benzoic rings and carboxylic groups, which were typical for organic substances. EC effectively removed organic pollutants containing functional groups such as carboxylic acid COH out-of-plane bending, olefin (trans), and NH3+ symmetrical angle-changing. Moreover, the extended Derjaguin-Landau-Verwey-Overbeek model suggested that the membrane filtered 30-min EC-treated PPWW had the strong repulsion force to foulants due to the higher cohesion energy (12.1 mJ/m2) and the lower critical load, which theoretically explained the reason of EC pretreatment on membrane fouling control. [ABSTRACT FROM AUTHOR]

This research was carried out with an objective to examine the efficacy of ultrafiltered xylano-pectinolytic enzymes in pulping of sugarcane bagasse. Maximum biopulping was achieved with enzyme dose of xylanase (175 IU / g bagasse) and pectinase (75 IU / g bagasse) at treatment period of 180 min. The temperature, pH, and bagasse to liquid ratio for biopulping experiments were kept constant at 55o C, 8.5, and 1:10 (g/ml), respectively. The ultrafiltered biopulping improved chemical pulping, resulted in 25.11%, 9.17% increase in brightness, unscreened pulp production and 11.81, 59.50, and 49.14% decrease in total solids, rejections. and kappa number, respectively. The bagasse biopulping also resulted in 15% decrease of alkali load to attain similar kappa number and optical properties as obtained under 100% alkali dosage. Ultrafiltered biopulped-unbleached samples showed significant increase in breaking length (13.55%), burst index (40.21%), tear index (19.04%), double fold (42.5%), Gurley porosity (28.21%) and viscosity (13.37%) in comparison with non-enzymatically treated control pulp samples. In comparison with non biotreated-bleached pulp samples, ultrafiltered biopulped-bleached samples also resulted in higher burst index (56.80%), breaking length (17.38%), double fold (39.58%), tear index (3.38%), viscosity (30.68%), and Gurley porosity (52.50%). This environmentally sustainable ultrafiltered biopulping approach for sugarcane bagasse has the potential to decrease the demand of chemicals, ultimately pollution along with enhance the quality of paper. [ABSTRACT FROM AUTHOR]

The present study aimed to understand microplastic (MP) ingestion by five fish species with different feeding habits namely, Schizothorax richardsonii and Crossocheilus latius (herbivore),Cyprinus carpio (omnivore), Tor chelenoid (herbi-omnivore), and Botia horii (carnivore). The fishes were sampled from River Alaknanda (one of the headwaters of River Ganga) patch at Srinagar, Garhwal, Uttarakhand. The fish gut samples were digested with 30% hydrogen peroxide and vacuum filtered through glass microfiber filter. Each filter paper was observed microscopically to count MPs, and then, selected MPs were chemically characterized using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR). The results revealed that all the species were contaminated with MPs and the rate of MP ingestion varied with feeding habits. The herbi-omnivore fish, Tor chelenoid, was observed to have the highest MP ingestion. Among the analyzed particles, fibers (66%) were the dominant type of MPs. The MPs were chemically characterized as High-Density Polyethylene (HDPE), Polypropylene (PP), and Polyester. This study contributes as a reference for the forthcoming researches, as it is the pioneer work on the ingestion of MP by fishes of a Himalayan River. [ABSTRACT FROM AUTHOR]

Existing literature ignores to consider multiple types of pollutants when analyzing energy efficiency and its convergence. Under this background, using SuperSBM-GML model, the improved entropy method, and convergence model, this paper calculates the green total-factor energy efficiency and its evolution trend of 35 China's industrial sub-sectors considering multiple pollutants, and analyzes its convergence. The results indicate that the average score of industrial green total-factor energy efficiency is low, and there are significant differences among sub-sectors: "Utilization of waste resources" is the highest, while "Manufacture of paper and paper products" is the lowest. The green total-factor energy efficiency shows an overall upward trend from 2006 to 2021, the main driving force comes from technological progress, but numerous sub-sectors have not sufficiently caught up with existing cutting-edge technologies. Specifically, the growth rate of green total-factor energy efficiency in high-energy-consumption sub-sectors is higher than low-to-medium-energy-consumption sub-sectors. There are both σ-convergence and β-convergence in low-to-medium-energy-consumption group, indicating that development of sub-sectors is stable and outstanding. Nevertheless, the high-energy-consumption group only exhibits conditional β-convergence, revealing an imbalance in energy efficiency development. Consequently, formulating the benchmark level of energy efficiency and developing energy efficiency "leader" system are suggested for low-to-medium and high-energy-consumption sub-sectors, respectively. [ABSTRACT FROM AUTHOR]

The circular economy is emerging as an economic form to solve economic, environmental, and social problems around the world. In this regard, various countries and regions of the world are making every effort to establish and implement circular economy strategies and action plans. This paper discusses the Recycling Law adopted in the Democratic People's Republic of Korea and its characteristics. To this end, this paper examines the cases of legalization in various countries and regions around the world related to the circular economy and recycling and explains the contents and characteristics of the Recycling Law in the Democratic People's Republic of Korea concerning it. The findings are that (a) the more science and technology develop and the more complete the economic structure becomes, the more complete the legal environment related to the circular economy should become and (b) if the transition to the circular economy is to be implemented with strong obligations, the planning lever must be regulated as a legal obligation, and the state needs to use the planning lever to thoroughly implement circular economy-related goals and strategies. These findings can be used as a reference to prepare a legal environment for promoting the circular economy in countries pursuing the realization of a circular economy in a top-down way, and it will also help fill the gap in research on the legal environment for promoting the circular economy. [ABSTRACT FROM AUTHOR]

Lipase enzyme has a critical role in deinking process along with other lignocellulosic enzymes. In this paper, we try to demonstrate the role of lipase in the enzyme cocktail used for enzymatic deinking. For this, we identified a potential lipolytic bacterium, Pseudomonas mendocina ED9 isolated from elephant dung with a molecular weight of 35 kDa. During the Box-Benhken model optimization, a maximum lipase activity of 105.12 U/g, which was 12.36-fold higher than the initial enzyme activity and 1.3-fold higher than the activity obtained during the Plackett Burman design, was achieved. A maximum lipase activity of 105.12 U/g was obtained after optimization. Ammonium sulphate (60%) precipitation resulted in a specific activity of 68.19 U/mg with a 1.4-fold purification and yield of 64%. Lipase from P. mendocina ED9 exhibited a Km of 0.5306 mM and Vmax of 25.0237 μmol/min/mg. A Δ brightness of approximately 14.5% were achieved during the enzymatic deinking using cocktail comprised of cellulase, xylanase and lipase. This reports the significant role and efficacy of lipase in enzyme cocktails for deinking applications. This formulation will reduce the pollution and environmental toxicity of conventional chemical deinking. [ABSTRACT FROM AUTHOR]

The geotechnical, chemical, and mineralogical properties of green liquor dregs (GLDs) generated as byproducts from five paper mills were investigated to assess their buffering and heavy metal immobilization capacities and their roles as water and oxygen barriers. One type of GLD was further studied to test the effects of the retrieval process and the storage, drying, and hydration of GLD. The high water retention capacity of the GLDs is valuable for limiting O2 diffusion. Laboratory results showed that the GLDs had hydraulic conductivities of 3.7 × 10−9–4.6 × 10−8 m/s and varied regularly in plasticity. The chemical and mineralogical compositions of the GLDs varied greatly, reflecting the raw material used to produce paper and the process used to retrieve GLDs. Although they had high total heavy metal contents, none of the leached elements from the GLDs (L/S 10 cm3/kg) exceeded the European Union's limits for landfills of non-hazardous waste. The GLDs exhibited high buffering capacities. In a supplementary test, the buffering capacities varied (0.0041–0.0114 M H+/g GLD) over 72 d after acid was added to the GLD. Changing the filtration process did not greatly affect the GLDs' properties but mainly affected the hydraulic conductivity, total heavy metal contents and sulfur content. Analyzing the storage of GLDs is necessary in the mining industry because remediation measures require large amounts of material over short periods. The buffering capacity of the dried GLD decreased slightly. The effect of dewatering caused by the mixing of 2% Na-lignosulfate with GLD (w/w) was low. [ABSTRACT FROM AUTHOR]

Goiânia, the Goiás State capital, starred in 1987, where one of the largest radiological accidents in the world happened. A teletherapy machine was subtracted from a derelict radiotherapy clinic and disassembled by scavengers who distributed fragments of the 50 TBq 137CsCl source among relatives and acquaintances, enchanted by the blue shine of the substance. During the 15 days before the accident was acknowledged, contaminated recycling materials were delivered to recycling factories in four cities in the state of São Paulo, Brazil, in the form of recycling paper bales. The contaminated bales were spotted, collected, and stored in fifty 1.6 m3 steel boxes at the interim storage facility of the Nuclear and Energy Research Institute (IPEN). In 2017, a check of the content was performed in a few boxes and the presence of high moisture content was observed even though the bales were dry when conditioned and the packages were kept sealed since then. The main objective of this work was to report the fungi found in the radioactive waste after they evolved for 30 years in isolation inside the waste boxes and their role in the decay of the waste. Examination of the microbiome showed the presence of nematodes and fungal communities. The fungi species isolated were Aspergillus quadricinctus, Fusarium oxysporum, Lecanicillium coprophilumi, Scedosporium boydii, Scytalidium lignicola, Xenoacremonium recifei, and Pleurostoma richardsiae. These microorganisms showed a significant capacity to digest cellulose in our trials, which could be one of the ways they survive in such a harsh environment, reducing the volume of radioactive paper waste. These metabolic abilities give us a future perspective of using these fungi in biotechnology to remediate radioactively contaminated materials, particularly cellulose-based waste. [ABSTRACT FROM AUTHOR]

Microorganisms are a promising source of colorants with large economic potential. Owing to better bio-degradability and higher eco-compatibility, microbial pigments propose promising avenues and can thus be a smart substitute for artificial pigments. The present work focused on the screening, isolation, and extraction of a blue-green pigment produced by soil microorganisms. The pigment-producing microorganism was identified as Pseudomonas aeruginosa on the basis of standard biochemical tests and by 16S rRNA sequencing. The purified blue pigment was characterized by high-performance liquid chromatography and gas chromatography–mass spectrometry. The antimicrobial activity of the microbial biocolor (3 × 108 CFU/ml) was studied, and the zone of inhibition was found to be 10 mm, 13 mm, 9 mm, and 7 mm for E. coli, S. aureus, B. subtilis, and S. typhi, respectively. The evaluation of the biocolor as a dye was executed on different types of textiles and paper. The dyed fabrics were checked for washing, rubbing, and light and temperature fastness. Standard fabric properties of the fabrics dyed with the extracted microbial pigment were also assessed. The dyed fabrics were finally subjected to a patch test to check for any kind of allergic or hypersensitivity on human skin. The extracted pigment from Pseudomonas aeruginosa exhibited remarkable dyeing properties, indicating the scope for utilization of the pigment as a colorant on different types of textile and paper materials. The present study highlights the application of a bacterial pigment as a dyeing agent, which may raise its market value and probably replace toxic synthetic dyes due to its nontoxic nature, compatibility with various textiles, and cost-effectiveness. [ABSTRACT FROM AUTHOR]

Improving carbon emission efficiency is crucial for achieving carbon peak and carbon neutrality. This paper analyzes the carbon emission efficiency of Chinese cities using panel data from 275 prefecture-level cities between 2006 and 2020. The super-efficiency SBM (undesirable slacks-based measurement) model of undesired output, combined with kernel density estimation and exploratory data analysis, is employed. This study finds, firstly, from 2006 to 2020, the average efficiency of carbon emissions in Chinese cities declined from 0.53 to 0.48, indicating a downward trend. Secondly, from a temporal perspective, the level of dispersion in urban carbon emission efficiency has become increasingly distinct over time, coupled with a decrease in polarization. Thirdly, in terms of spatial analysis, urban carbon emission efficiency in China shows a positive correlation in a global context. In terms of local spatial correlation, it primarily exhibits high-high and low-low clusters, with a few instances of low–high and high-low clusters. Finally, based on the research findings, this paper proposes suggestions to improve urban carbon emission efficiency. [ABSTRACT FROM AUTHOR]

The objective of this work was to evaluate thermal paper (TP) tickets used in Argentina as a potential source of bisphenol A (BPA) that could impact humans and the environment. BPA in TP was measured by HPLC ranging from 11.1 to 30.5 mg BPAg−1. In order to estimate the impact on humans, dermal BPA estimated daily intake was calculated as being 79.3 ± 19.5 μgd−1 for workers and 1.6 ± 0.4 μgd−1 for the general population. To evaluate TP's impact on the environment, BPA migration from TP to water and soil was studied. In the case of water, 99.6% of the BPA tickets content migrated in 30 h, while 78.0% moved into the soil in 96 h. BPA degradation kinetics in soil and water were also carried out; while in soil 61.9% of BPA degraded in 120 h, no degradation was observed up to 120 h in tap or river water. Additionally, ecotoxicological effects of BPA on the earthworm Eisenia andrei, a representative terrestrial indicator, were studied performing bioassays on lethality, avoidance, and reproductive and enzymatic activity. BPA showed to be very toxic to E. andrei (LC50 value in contact paper test of 17 μgcm−2, 95% confidence interval 6–46 μgcm−2, 24 h exposure) and also caused an increase of total cocoons for earthworms exposed to 10 and 50 mg BPA kg−1 soil. Evasion response was observed at a concentration of 50 mg BPA kg−1 soil, while no effect was observed on cholinesterases, carboxylesterases, and glutathione S-transferases activities (1, 10, and 50 mg BPA kg−1 soil). Finally, a simple BPA degradation technology using water peroxide and radish (Raphanus sativus) tissue as catalyst was explored as a simple and domestic potential treatment to avoid BPA migration to the environment. [ABSTRACT FROM AUTHOR]

The objective of this study was to check the potential of crude xylano-pectinolytic enzymes in bleaching of rice straw pulp, in order to reduce the toxic waste load for managing the environmental pollution. The xylano-pectinolytic enzymatic bleaching step for delignification was found to be most effective at pulp consistency 1:10 g/ml, xylanase:pectinase dose of 9:4 IU/ml, pH 8.5 and treatment time 180 min at temperature of 55 °C, and resulted in lowering of kappa number of the rice straw pulp by 15.29%. In subsequent bleaching stages, this enzymatic pre-bleaching treatment also resulted in 30% reduction of active chlorine dioxide dose without any loss of optical properties. Significant improvement in various physical properties of the enzymes treated pulp, tear index (15.43%), breaking length (11.11%), double fold number (25.92%), burst index (9.88%) and viscosity (13.63%), and Gurley porosity (39.86%) was also noticed. This approach resulted in reduction of BOD and COD values by 21.07% and 26.57%, respectively. This is the first study on the use of crude xylano-pectinolytic enzymes for bio-bleaching of rice straw pulp. [ABSTRACT FROM AUTHOR]

Microplastics (< 5 mm) have lately been identified in the atmosphere of urban, suburban, and even distant places far from plastic particle areas, suggesting the possibility of long-distance atmospheric transport of microplastics. However, the occurrence, fate, transmission, and effects of these suspended atmospheric microplastics (SAMPs) are all currently unknown in the Philippines. This study investigated the presence of suspected microplastic in the atmosphere of sixteen cities and one municipality of Metro Manila, Philippines. Sampling was conducted using a respirable dust sampler mounted with a Whatman GF/C filter paper at an intake flow rate of 1.4 L/min with Whatman GF/C filter paper. Results reveal that all seventeen sampling areas have the presence of SAMPs. A total of 155 SAMPs were found and confirmed in Metro Manila, with the highest concentration in Muntinlupa City and Mandaluyong City (0.023 SAMP/NCM). Fourteen SAMP types were identified across the sampling areas, ⁓ 74% with polyester. This study is the first record of the presence of microplastics suspended in the ambient air in the Philippines. It is estimated that an adult person in Metro Manila has the potential to inhale (5–8 per minute, normal minute ventilation) about 1 SAMP if exposed for about 99.0 to 132 h. Further studies should be done to evaluate the fate and health effects of these SAMPs in Metro Manila's setting. [ABSTRACT FROM AUTHOR]

Lignocellulose biomass predominantly constitutes the main feedstock for pulp and paper industry. Though some products of pulp and paper industry require the presence of lignin content, for most of the useful products formation lies in the efficient and selective removal of lignin component to make use of the intact cellulose fraction during the pretreatment of pulp. Lignin is a recalcitrant heteropolymer comprised of several complex stable bonds and linkages. The chemicals or intense energy processes used for delignification process release the hazardous chemicals compounds in the wastewater which cause toxicity and environmental pollution. The implementation of bacterial species has elucidated an effective approach in the generation of value-added products while degrading lignin from pulp biomass as well as detoxification of effluent. The direct use of bacterial cells in lignocellulose biomass and wastewater streams is promising as it outperforms the practical and technical constraints largely confronted by fungal and enzymatic means. The present review paper thus unleashed the potential of ligninolytic bacteria towards delignification of pulp biomass and treatment of effluent together with bioconversion of biomass and lignin into value-added products. [ABSTRACT FROM AUTHOR]

Municipal waste management is a major challenge for local governments in South Africa and Namibia, as in other developing countries. The circular economy concept in waste management is an alternative sustainable development framework that has the potential to combat resource depletion, pollution, and poverty while achieving the SDGs. The purpose of this study was to investigate the current waste management systems in Langebaan and Swakopmund municipalities resulting from municipal policies, procedures, and practices in the context of a circular economy. A mixed method approach was used to collect qualitative and quantitative data through structured in-depth interviews, document analyses, and direct observation. The study found that the Langebaan and Swakopmund municipalities have not yet fully implemented the circular economy concept into their waste management systems. A mix of waste consisting of papers, plastics, cans, tyres, and organic products is dumped into landfills weekly at a rate of about 85%. The main challenges to implementing the circular economy concept include: lack of technical solutions, inadequate regulatory frameworks, insufficient financial resources, lack of private sector involvement, insufficient human resource capacity, and inadequate information and knowledge. A conceptual framework was therefore proposed to guide the municipalities of Langebaan and Swakopmund in implementing the circular economy concept in their waste management systems. [ABSTRACT FROM AUTHOR]

Carbon dioxide mineral carbonisation is a means to achieve permanent carbon dioxide storage, this paper to solid waste materials as the main raw material to prepare fly ash-based carbon dioxide storage materials. Through the design of carbon dioxide adsorption experimental setup to study the main factors affecting the adsorption capacity of the fly ash-based storage materials, the experimental results show that, the fly ash mass fraction decreased from 90 to 10%, the water-cement ratio increased from 0.4 to 0.8 when the CO2 adsorption of fly ash-based materials increased by 82% and 30%, respectively. The effect of strong alkali on CO2 adsorption capacity was also investigated in this paper, and the results showed that the CO2 adsorption of the fly ash-based material sample with 10 ml NaOH added increased by 197% compared with that of the sample with 5 ml NaOH added, whereas the adsorption amount was reduced by 85% when 25 ml NaOH was added instead, which was attributed to the accelerated hydration process of the material due to the excessive alkalinity that consumed the calcium and magnesium ions in the material, and at the same time the production of hydration products hindered the transport of CO2 within the material, which led to a decrease in CO2 adsorption. [ABSTRACT FROM AUTHOR]

In this study, TiO2 nanoparticle (TiO2NP)-coated film was produced to protect manuscripts against microorganisms using ecofriendly benign materials. As a result, a simple method was created that uses poultice biofilm made of carboxymethyl cellulose (CMC) and Phytagel plant cell (PGP) loaded with TiO2NPs to preserve manuscripts against microbes in an environmentally responsible way. Three volumes (1, 2, 4 mL) of TiO2NPs were put into a biofilm combination to produce the poultices known as CMC/PGP/TiO2-1, CMC/PGP/TiO2-2, and CMC/PGP/TiO2-3. The synthesized TiO2NPs were nearly spherical in shape, small in size (98 nm), and stable (zeta potential value − 33 mV). The results showed that the unique deposition of TiO2NPs on the biofilm surface gave the produced films loaded with TiO2NPs a rough structure. The highest values of mechanical characteristics were determined to be in CMC/PGP/TiO2-1 with values of 25.4 g, 6.6 MPa, and 11.4%, for tensile strength, elongation at break, and tear strength, respectively. Based on molecular identification, the fungus Aspergillus sydowii and the bacterium Nevskia terrae, with accession numbers MG991624 and AB806800, respectively, were isolated and identified from an antiquated manuscript formed from cellulosic fibers. Before the experiments, the produced cotton paper samples were aged, and then, one group was infected for 6 months by A. sydowii and the second group with N. terrae. Following the preparation of a CMC/PGP biofilm loaded with various volumes of TiO2NPs, poultices were applied to infected cotton paper in order to clean it. The infected cotton paper was placed inside the sandwich-like poultices that were created. The poultice CMC/PGP/TiO2-2 demonstrated potential for preventing the growth of A. sydowii and N. terrae-infected cotton paper, when the fibers were saved, cleaned, and coated with CMC/PGP/TiO2-2 after absorbing the fungus and the bacterium and exhibiting exceptional antimicrobial activities. Finally, the novel biofilms have demonstrated their capacity to lessen microbial contamination of cotton paper. In order to generalize the usage of these poultices, it is also advised that they be produced on a large scale and tested on a variety of organic materials in the future. [ABSTRACT FROM AUTHOR]

The digital finance generated by technology empowerment profoundly affects the innovative behavior of micro-enterprises. To estimate how digital finance influences the quantity and quality of green technological innovation, this paper introduces digital finance into endogenous economic growth model and further conducts correlation analysis with the combination of fixed effects model (FE) and panel threshold model (PTM). Moreover, this paper investigates the action mechanism from the perspective of financial constraint and financial cost. The empirical results indicate that digital finance improves the quantity and quality of green technological innovation significantly. Compared with the coverage of digital finance and digital services, the impact of usage depth on green innovation accumulates dynamically superimposed in the long term. The digital finance contributes to correct the mismatch of financial resources and further induces inclusive green innovation in the dimension of ownership, growth cycle, and enterprise scale. Mechanism analysis shows that the relief of financial constraint, environmental information disclosure, and increase of R&D investment are the main paths for digital finance to drive green innovation. With the different thresholds, the dynamic evolution process of green innovation driven by digital finance is characterized by "first quantitative change and then qualitative change." This paper suggests that the integration of technological innovation and digital financial services needs to build an inclusive digital financial service system, cultivate diversified financial formats, and improve the market environment of digital financial services. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic forced use of face masks up to billions of masks per day globally. Though an important and necessary measure for control of the pandemic, use of masks also poses some inherent risks. One of those risks is inhalation of microplastics released from the mask materials. Since most of the mask materials are made from plastic/polymers, they always have the potential to expose the user to fragmented microplastics. To estimate the amount of inhalable microplastic exuded from masks, an experiment simulating real-life scenario of mask usage was performed. The study included collection of microplastics oozed out from the masks on to a filter paper followed by staining and fluorescence detection of the total number of microplastics using a microscope. Both used and new masks were studied. Based on the emission wavelength, the microplastics were found to be belonging to three different categories, namely blue, green and red emitting microplastics respectively. The number of microplastic particles emitted per mask over a period of usage of 8 h was about 5000 to 9000 for new masks and about 6500 to 15,000 for used masks respectively. The estimation of polymer type of plastic in the mask fabrics was also carried out using Raman and FTIR spectroscopy. [ABSTRACT FROM AUTHOR]

The high cost of building materials occasioned by the increased cost of constituent materials has contributed immensely to the problem of housing deficit faced in Africa and major developing countries of the world. Waste paper can be recycled into bricks but there are limited studies to that effect. Waste glass is used as partial cement replacement to reduce the cost of cement and is also used as a pozzolan. This study focused on the development of paperbricks from the wastes of paper and glass. Response surface method (RSM) was involved in the design of the experiment involving 4 factors: glass powder replacement of cement (A), curing duration (B), compaction pressure (C), and water/cement ratio (D). Box-Behnken method was engaged for the 4-factor, 3-level design. The result of ANOVA showed that experimental inputs had a significant effect on compressive strength response. Factors A, B, and C had a synergetic effect on the response while factor D had an antagonistic effect on the response. Combined interaction between the factors that the response depended on the interactive patterns of the factors. A statistical fit model was developed to predict the compressive strength of the composite. RSM optimization revealed a combination of 36.68%, 57.82 days, 8.50 MPa, and 0.364 for factors A, B, C, and D, respectively, predicting a strength value of 7.358 MPa. Validation experiment carried out using the optimal conditions yielded 7.54 MPa; a deviation of + 0.0247. Since the deviation is less than ± 0.05, the model was statistically validated and fit. [ABSTRACT FROM AUTHOR]

The maritime sector plays a key role in transportation in the world, and over 90% of world trade is carried by ocean shipping. However, ships are large contributors to global emissions. Hence, a vast majority of research publications have focused on different emission monitoring techniques, which are essential to establishing required policies and regulations that reduce maritime transport emissions. Various documents have been published on monitoring maritime transport emissions affecting air quality since 1977. This paper presents a bibliometric analysis to explore evolution trends, gaps, challenges, and productive countries, as well as the most cited publications with high scholarly impacts. The annual growth of 9.64% in publications demonstrates an increasing interest in reducing maritime vessel emissions. Journal articles constitute 69% of publications, followed by conference papers (25%). China and the USA play a leading role in this field of research. Regarding active resources, the "Atmospheric Environment" journal accounts for the highest relevant publications, H-index, and total citations. Eventually, the temporal evolution of keywords shows the increasing trend towards sustainable maritime transport. [ABSTRACT FROM AUTHOR]

Phthalate acid esters are widely used as plasticizers to impart plastic flexibility in various industrial applications. In this study, the content of seven phthalates, dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) adipate (DEHA), di-2-ethylhexyl phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP), and di-isodecyl phthalate (DIDP) were determined in paper cups using gas chromatography-mass spectrometry (GC-MS). In addition, the potential migration of these seven phthalates from paper cups into various food stimulants under different conditions was evaluated. The levels of DBP, DEHA, DEHP, and DNOP were in the ranges of 0.07-3.14, 0.16-42.69, 0.45-58.56, and 0.3-2.4 mg/kg, respectively. Meanwhile, BBP, DINP, and DIDP were not detected in most of the tested samples. In the migration test, DEHA was released to 50 % ethanol and n-heptane in a time-dependent manner and the maximum migration levels were 65.62 ± 3.61 and 95.56 ± 19.76 μg/L, respectively. The release of other phthalates was very low or negligible. These results demonstrated that paper cups are not a significant source of phthalate exposure; however, DEHA could be released from paper cups into alcoholic beverages or oily liquid beverages in the human diet. [ABSTRACT FROM AUTHOR]

Phenol and its derivatives are the major environmental pollutants discharged from paper and pulp industries into water bodies. All these compounds and chlorinated phenolic compounds in particular are very toxic to fauna and flora, even at relatively low concentration. This study aimed to investigate the removal rate of phenolic compounds from the effluent of pulp and paper industries using a combination of ozonation and photocatalytic processes. Firstly, a certain volume from the effluent of paper and pulp industries containing certain phenol concentrations was obtained and fed into a prefabricated reactor at laboratory scale. Then, the combined and separate effects of zinc oxide dosage (ZnO), ozone flow rate (O), and pH under ultra violet radiation for 30 min were evaluated. The concentration of phenolic compounds and the produced ozone gas flow rate were measured by a spectrophotometry and iodometric method, respectively. The results showed that the phenolic removal rate increased at acidic PHs compared with alkaline PHs; it was also decreased with the increase in ZnO dosages. Furthermore, the highest phenolic compound's removal rate was 99% at the optimal condition (pH 5, ZnO dosage of 0.1 g L at the 30 min with UV-C illumination of 125 W). Finally, Daphnia toxicity test showed that treated effluent was safe and met the standards to the extent that it can be discharged into the receiving waters. [ABSTRACT FROM AUTHOR]

The present paper reports the heavy metal uptake by water lettuce (Pistia stratiotes L.) from paper mill effluent (PME) with its prediction modeling studies. Lab scale phytoremediation experiments were performed in glass aquariums to grow P. stratiotes in 0% (bore well water as a control), 25%, 50%, 75%, and 100% concentrations of PME. The influence of pH and heavy metal concentration in PME for the effective uptake and accumulation of heavy metal contents (∆Y: mg/kg) in plant tissues was modeled using two-factor multiple linear regression. The results showed that the selected input variables were supportive to develop prediction models with higher linear regression (R2 > 0.72), high model efficiency (ME: 0.92–0.99), low mean average normalizing error (MANE < 0.02), and statistically significant F > Prob values. Kruskal-Wallis one-way post hoc test indicated that the contents of Cd, Cu, Fe, Pb, and Zn in the roots, leaves, and whole plant were affected by PME concentration while the contents of Mn did not. The correlation studies showed that the bioaccumulation of heavy metals was found both element and PME concentration specific. This work represents an effective method to model heavy metal uptake by P. stratiotes from PME. Furthermore, this methodology can also be adopted for predicting effective metal uptake by plant species being used for the phytoremediation of heavy metals from industrial effluents. [ABSTRACT FROM AUTHOR]

Demand for particleboards keeps increasing and as such more trees are fell for its production, engendering deforestation. For the purpose of reducing falling of trees, this study, focused on recycling of waste paper in the development of paperboard as alternative to particleboards used for furniture and interior household applications. Kenaf fiber (KF) was blended at varying proportions of 0, 1, 2, 3, 4, and 5 wt.% with 20 wt.% constant cement and 20 wt.% constant coconut shell powder while the remaining was paper pulp. Board specimen developed were cured for 14, 28, and 90 days and mechanical properties were examined. Results obtained showed that fiber dosage improved bond strength and screw holding strengths as compared with the control mix. Similarly, modulus of rupture was enhanced with KF loading as compared with control mix while 1 to 3 wt.% KF spawned enhancement of modulus of elasticity. However, 4 and 5 wt.% KF led to a reduction in the modulus. Infusion of the fiber enhanced tensile strength from 1 to 3 wt.% content. 14-day and 28-day curing periods were observed to improve properties while the 90-day curing period is detrimental to all properties. Optimization via signal-to-noise ratio revealed an optimum mix of 2 wt.% obtained for fiber and an optimum curing duration of 28 days. [ABSTRACT FROM AUTHOR]

This paper consists of the evaluation in regards to the ecotoxicological effectiveness of a treatment applied to a coal mining waste. The treatment consisted of separating the particles based on gravimetric concentration in spirals, generating three fractions: heavy, intermediate, and light, with high, moderate, and low pyrite content, respectively. The intermediate fraction represents the larger disposal volume of the waste on soils. To evaluate the effectiveness of the treatment, metal determination and bioassays Eisenia andrei, Folsomia candida, Lactuca sativa, Daphnia similis, and Raphidocelis subcapitata were applied to the intermediary fraction. To evaluate the toxicity to aquatic organisms, elutriates were generated from the unprocessed waste and the intermediate fraction. The intermediate fraction showed a decrease of metal concentrations compared to the untreated waste. Metal concentrations in the intermediate fraction were below the Brazilian thresholds for soil quality. Avoidance bioassay with E. andrei and germination tests of L. sativa showed no significant effects. The bioassay with F. candida indicated a significant reduction in reproduction at the highest doses used (24% and 50%). Bioassays with D. similis and R. subcapitata revealed a reduction in toxicity of the intermediate fraction compared to the untreated waste. However, the toxicity levels of the intermediate fraction to aquatic organisms still require attention, especially in regards to pH that played a crucial role in the toxicity. Finally, the results suggest that the treatment performed on the coal waste was efficient, even though significant toxicity have still been detected in the treated waste and additional steps are still required for adequate final disposal. [ABSTRACT FROM AUTHOR]

Agricultural waste residues (agro-waste) are the source of carbohydrates that generally go in vain or remain unused despite their interesting morphological, chemical, and mechanical properties. With rapid urbanization, there is a need to valorize this waste due to limited non-renewable resources. Utilizing agro-waste also prevents the problems like burning and inefficient disposal that otherwise lead to immense pollution worldwide. In addition, conversion of biomass to value-added products like earthen cups, weaving baskets, and bricks is equally beneficial for the rural population as it provides secondary income, creates jobs, and improves rural people's lifestyles. This review paper will discuss an overview of different applications utilizing agro-waste residues. In particular, agro-wastes used as construction material, bio-fertilizers, pulp and paper products, packaging products, tableware, heating applications, biocomposites, nano-cellulosic materials, soil stabilizers, bioplastics, fire-retardant additive, dye removal, and biofuels will be summarized. Finally, several commercially available agro-waste products will also be discussed, emphasizing the circular economy. [ABSTRACT FROM AUTHOR]

Carbon abatement efforts in China are penetrating to sub-national level. Zhejiang province, as the 4th wealthy region in China and important player in global market (e.g., textiles, cloth, petroleum, and chemical products), lacks in-depth study of its climate change mitigation efforts, especially after China's accession to the WTO in 2001. This paper analyzed carbon emissions and intensity in Zhejiang province using most comprehensive and time-series dataset available to date since 2002. Its carbon emissions were growing at a declining speed, and carbon intensity was almost halved. The leading emitters largely agglomerate around Hangzhou Bay, close to Zhoushan Port and Shanghai Port. The growth in absolute emissions primarily arose from higher investment (323.1 Mt) and exports (280.6 Mt), while the slower growth was mainly due to efficiency improvements (− 245.7 Mt) stemming from energy and carbon abatement policies and inflows of emission-intensive products from the rest of China. Similarly, declined carbon intensity was mainly attributed to efficiency improvement. Major contributors were sector S13-Non-metallic minerals, S12-Chemicals, S26-Transport, storage and post, S07-Textiles, and S10-Paper. Economic restructuring played different roles on emissions and intensity during various development stages. Policy implications of the findings are discussed for future developments. [ABSTRACT FROM AUTHOR]

Peat-based growing media are not ecologically sustainable and peat extraction threatens sensitive peatland ecosystem. In this study, olive-stone waste (OSW) and paper waste (PW) were used in different ratios—as growing media—for ornamental crop production, as peat (P) substitutes. Marigold (Calendula officinalis L.), petunia (Petunia x hybrita L.) and matthiola (Matthiola incana L.) plants were grown in (1) P (100%), (2) P:OSW (90%:10%), (3) P:OSW (70%:30%), and (4) P:OSW:PW (60%:20%:20%). The physicochemical properties of these substrates and the effects on plant growth were determined. The addition of 10-30% OSW into the substrate increased marigold height compared to plants grown in 100% peat. No differences in plant size, plant biomass (leaves and flowers), and dry matter content were found. Adding PW, in combination with OSW, maintained marigold height and total number of flowers produced to similar levels as in plants grown in 100% peat. In matthiola, adding 30% OSW into the substrate reduced plant size and fresh weight, but not plant height. No differences were observed when plants grew in lower OSW (i.e., 10%) content. Petunia's height, its total number of flowers and flower earliness (flower opening) were increased in the presence of OSW compared to the plants grown in 100% peat. The addition of OSW did not affect petunia's size and fresh weight among treatments. The addition of PW suppressed several plant growth-related parameters for both matthiola and petunia. The insertion of OSW did not change leaf chlorophyll content whereas the presence of PW decreased chlorophylls for marigold, petunia, and matthiola. Both OSW and PW altered the content of total phenolics and antioxidant capacity of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) in leaves and flowers for marigold and petunia. Both 30% OSW and PW increased antioxidative enzyme metabolism due to the increased damage index and lipid peroxidation observed in plants. Leaf N and P content decreased in PW-based media, while matthiola displayed visual phytotoxicity symptoms when PW was added into the substrate. The present work indicates that up to 30% of OSW can replace peat for marigold and petunia growing and only up to 10% of OSW for matthiola, while the addition of PW on top of OSW is not recommended, so further research is needed. [ABSTRACT FROM AUTHOR]