Search

Facing the challage of energy conservation and emission reduction in the building sector, most energy saving strategies of central heating only focus on the performance improvement of building envelope, ignoring the impact of energy use behavior. This paper proposed a building energy conservation strategy based on energy use behavior analysis, which provides a perspective for in-depth exploration of building energy conservation. After investigating a typical university in the northern China, the energy use behaviors were characterized and two different DeST energy consumption models before or after considering energy use behavior were established. By comparing the results calculated by these two models, the impact of energy use behavior analysis on building energy consumption was quantitatively analyzed. The results show that the heating energy consumption and carbon emission can be reduced by 23.28% and 23% respectively through the proposed strategy based on energy use behavior. Therefore, the analysis of energy use behavior can provide a theoretical basis for heating operators to make decisions on energy supply regulation. With central cooling and heating further popularizing in the future, the research methodology of this paper has more extensive reference value for energy conservation and emission reduction strategies in the building sector. [ABSTRACT FROM AUTHOR]

• The data requirements of quota methods are summarized, and a city-scale database containing 670 credible government office buildings is established. • By comparing the processes, the results and applicability, the selection basis of quota methods under different conditions is refined. • A flow chart of the formulation process and method selection of city-level building energy consumption quotas is constructed. • It is proposed that special attention should be paid to the outliers, and the characteristics of outliers in Chongqing are summarized. Energy consumption quota policies are effective management measures to promote energy conservation and emission reduction in China. Cities need to choose an appropriate method to formulate local energy consumption quota standards. This paper is based on the data of 670 government office buildings in Chongqing and the selected quantile method (QM), quota-level method (QLM) and multiple linear regression (MLR) method, which are widely used in the formulation of city-level energy quotas. By comparing their interpretability, evaluation, consistency and stability, the application conditions and applicability of each method are summarized. MLR has the strongest explanatory power but the highest requirements for the technology and information dimensions. The QLM is more explanatory and stable than the QM and is more suitable for the initial stage of energy quota management. When using the QLM, we should consider scientific classifications and reasonable quota levels. Special attention should be given to "outliers" with abnormal evaluations of the quota results. The outliers in Chongqing are characterized as buildings that have been used for more than 10 years and have an area of less than 5000 m2. Finally, this paper constructed a flow chart of the formulation process and method selection to help policymakers better understand how to choose the most appropriate method and identify inefficient buildings. [ABSTRACT FROM AUTHOR]

• A new urban building energy modeling tool-AutoBPS was developed. • AutoBPS calculated urban building energy demands, analyzed energy retrofit and rooftop PV potential via EnergyPlus. • AutoBPS automatically generated multi-zone models, considering shading from surrounding buildings. • A downtown district of 3633 buildings in Changsha, China, was simulated to demonstrate the tool's features. • All three energy conservation measures and PV installation could save 38.6% of total energy demand. China has promised to peak carbon emissions by 2030 and become carbon neutral before 2060. Achieving this target requires actions from all sectors, especially the building sector, which accounts for 33 % of the total energy consumption in China. Within this scenario, this paper introduces a new urban building energy modeling tool, Automated Building Performance Simulation (AutoBPS), to calculate urban building energy demands and to analyze energy retrofit and rooftop photovoltaic (PV) potential. AutoBPS uses a building-by-building approach to automatically generate multi-zone (one zone per floor) models based on the city building dataset, considering the shading effect by surrounding buildings. The tool simulates building energy use and PV generation via EnergyPlus. A downtown district of 3633 buildings in Changsha, China, was selected as a case study to demonstrate the features of the tool. Firstly, annual baseline energy uses of 1793 GWh were simulated by inputting Geographic Information System (GIS) data. Then, different energy conservation measures (covering envelope, lighting, cooling system upgrade, etc.) and roof PV generation systems were adopted to explore energy saving potential. The results showed that the window upgrade was the most energy-efficient individual measure for residential buildings, while the lighting upgrade was that one for commercial buildings. Altogether three measures could save 2.7 ∼ 30.7 % of annual site energy use intensity per building. The total energy demand could be reduced by 18.5 % by combining all measures and saved by 38.6 % when PV installation was added. AutoBPS can be easily applied to other cities, supporting urban energy efficiency plans for carbon reduction goal implementation. [ABSTRACT FROM AUTHOR]

• POE was carried out to compare the design target and operational effect after use. • A Large Irregular Green Commercial Building was chosen for in-depth analysis. • We recommend the building energy saving and carbon emission reduction strategy. Commercial buildings, especially large irregular commercial buildings with complex space and dense occupation, have high energy consumption and carbon emissions. Moreover, the actual operating performance differs significantly from its design, in terms of energy conservation and carbon emissions. This study selected an irregular large-scale green commercial building in Dalian, a coastal city in the cold zone of China. The running energy consumption and indoor physical environment were investigated and analyzed, and a satisfaction survey was conducted using the Post-occupancy evaluation (POE) methods. The promotion strategies of holistic design were proposed by comparing the operational building performance with the design target. The research shows that the energy consumption of the building was 68.02 kWh/m2, which failed to meet the standard requirements. The carbon emission was 74.76 kgCO 2 /m2. Less than 10 % of humidity in summer fell in the expected range, and the lowest value of PM 2.5 concentration in winter was 28.3 %. The score of indoor environmental quality and service satisfaction was low. This paper identifies the problems and analyzes the differences between the operation stage and design phase. It provides recommendations and guidelines for optimizing the carbon emission and indoor environment based on the performance improvement of building operational conditions. [ABSTRACT FROM AUTHOR]

China is currently experiencing rapid urbanization. The building sector plays an important role in China's energy conservation and emission reduction. An increasing amount of energy will be steadily consumed in the building sector as the urbanization process accelerates. China's government attaches great importance to building energy efficiency (BEE). How does the urbanization process affect building energy consumption (BEC)? How much energy can be saved in the building sector through implementation of energy polices? These questions are critical for government development strategies and planning. Thus, in this paper, an econometric model (co-integration technique) is developed to analyze how China's BEC is affected by macroeconomic variables in the context of urbanization, and also forecast the BEC and BEE potential until 2020 under different scenarios. The research result shows that occupants’ lifestyles, residents’ living standards, and energy price have significant influences on BEC. The building sector is likely to contribute approximately 20% to China's energy conservation through electricity pricing reform. [ABSTRACT FROM AUTHOR]

Abstract: A number of radiant heating/cooling systems have been applied in Mainland China in recent years for its improved thermal comfort and inherent energy saving potential. Because the systems require relatively higher temperatures for cooling and lower temperatures for heating, many natural low-grade energy sources can be directly or indirectly used. However, because of a lack of information about prior practical projects, a number of difficulties in design, construction and management of the systems have been encountered, and energy efficiency is not necessarily achieved in all situations. This paper reviews the practical applications in four major projects involving different building types located in different climatic cities and presents the associated considerations in system design. Other factors affecting the energy efficiency of the systems are identified, such as the spatial convection and radiation heat transfer processes in indoor environments and the envelope thermal properties. Further studies are needed to achieve system optimization and to realize the full energy saving potentials of radiant systems by developing analytical design methods and monitoring the actual energy use of such systems in completed projects. [Copyright &y& Elsevier]

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: The purpose of this paper is to investigate the reasons for ever growing energy consumption in buildings and to give enhanced supervision strategies for reduction of building energy consumption compared to regular ones. A case study of Ningbo city was used to make a detail analysis. Several factors were determined as the reasons for ever growing building energy consumption including climate change, household electricity load increase, the growth of real estate, fast-growing household electrical appliances, high energy consumption in existing buildings, changes in industrial structure and the lack of enhanced government supervision. Then the discussion of suitable countermeasures shows that only enhanced supervision strategies are currently applicable. Finally, it is concluded that enhanced government supervision strategies, including the establishment of a strict control system for new built buildings through information integration and encryption, establishing an energy efficiency supervision system of large-scale public building and a carrot-and-stick approach with added expert checklist for the building application of renewable energy, showed great advantages in promoting building energy efficiency in Ningbo, compared with other cities. These supervision strategies are applicable in other cities as they are in the similar situations in the enforcement of building energy efficiency. [Copyright &y& Elsevier]