Search

The southern Junggar Basin, Xinjiang, has abundant coalbed methane (CBM) resources. Currently, the Baiyang River development pilot test area (BYR block for short) in the Fukang east block has achieved large-scale CBM development, but the productivity characteristics and its controlling factor are still unclear. Based on the field production data of the BYR block and experimental tests, this paper summarizes the gas and water production characteristics and presents the analysis results of the geological and geochemical responses to the productivity of CBM wells. The productivity of CBM wells in the BYR block was generally characterized as medium-to-low yield. The productivity was jointly controlled by the burial depth, structure condition, thickness and number of co-production coal seams, and hydrogeological conditions. The gas production first increased and then decreased with the increase in the burial depth of the coal seam, and a burial depth between 750 and 1000 m was the most beneficial to increasing the gas production due to the good gas preservation conditions and suitable permeability and stress conditions. The total thickness of the co-production coal seams had a positive effect on the productivity of gas wells, but the productivity was also affected by the number of co-production coal seams and interlayer interference. In the BYR block, the co-production of the nos. 41 and 42 coal seams was the most favorable combination form for CBM drainage. The productivity of CBM wells had a good response to the Na+, K+ and HCO3− concentrations but a poor response to δD-H2O and δ18O-H2O. Based on the concentrations of the main ions and TDSs of the coal seam water, a productivity response index δ* was established, and there was a good positive correlation between the productivity and δ*. [ABSTRACT FROM AUTHOR]

Hydrogen is receiving unprecedented momentum and is projected to meet a sizable share of the final energy demand in the future. The coupling between the hydrogen and power systems can help integrate volatile renewable energy, reduce curtailment, and realize long-term energy storage. Different coupling modes are being proposed, yet quantitative comparisons are absent. To fill this gap, this paper firstly summarizes the system composition of potential power–hydrogen coupling modes and analyzes their advantages and disadvantages. Then, a model for power–hydrogen coordinated planning optimization is proposed for quantitative analysis. Southern Xinjiang is chosen as a representative of the northwestern area in China, which has plentiful renewable resources and a relatively small local load at present, for a case study. Through result analysis, it is found that the mode of power–hydrogen coupling at the source side, either for in situ utilization or for long-distance transport via pipelines, shows better economic competitiveness. The discussion provides suggestions and a reference to policymakers for formulating infrastructure or industry plans in advance to better accommodate the rapidly developing renewable energy. [ABSTRACT FROM AUTHOR]

There are large, heavy oil reserves in Block X of the Xinjiang oilfields, China. Due to its large burial depth (1300 m) and low permeability (26.0 mD), the traditional steam-injection technology cannot be used to obtain effective development benefits. This paper conducts experimental and simulation research on the feasibility and mechanism of CO 2 -energized fracturing of horizontal wells and N 2 foam huff-n-puff in deep heavy oil reservoirs with low permeability in order to further explore the appropriate production technology. The foaming volume of the foaming agent at different concentrations and the oil displacement effect of N 2 foam at different gas/liquid ratios were compared by the experiments. The results show that a high concentration of foaming agent mixed with crude oil is more conducive to increasing the foaming volume and extending the half-life, and the best foaming agent concentration is 3.0∼4.0%. The 2D micro-scale visualization experiment results show that N 2 foam has a good selective blocking effect, which increases the sweep area. The number of bubbles per unit area increases as the gas/liquid ratio increases, with 3.0∼5.0 being the optimal gas/liquid ratio. Numerical simulation results show that, when CO 2 -energized fracturing technology takes into account the advantages of fracturing and crude oil viscosity reduction by CO 2 dissolution, the phased oil recovery factor in the primary production period can reach approximately 13.7%. A solvent pre-slug with N 2 foam huff-n-puff technology is applied to improve oil recovery factor following primary production for 5∼6 years, and the final oil recovery factor can reach approximately 35.0%. The methodology formulated in this study is particularly significant for the effective development of this oil reservoir with deeply buried depth and low permeability, and would also guide the recovery of similar oil deposits. [ABSTRACT FROM AUTHOR]