Search

This paper documents depositional structures and their reservoir characteristics in the Wufeng–Longmaxi shale from outcrops and cores using thin sections, X-ray powder diffraction (XRD) analysis, carbon–sulfur analyzer, helium porosimeter, decay permeameter, and focused ion beam scanning electron microscope (FIB-SEM). In the study area, clayey and silty laminae abound in the shale. Clayey laminae are rich in bedding parallel fractures, microfractures, and organic pore networks. Silty laminae are rich in isolated inorganic pores and limited amounts of bedding non-parallel fractures. Various inter-lamination of clayey and silty laminae form five depositional structure types which are closely related to the ancient hydrodynamics, paleoredox condition, and sedimentation rate and have significant impacts on shale fractures, microfractures, pore types, pore-size distribution, and porosity. For the paper lamination (PL) and grading lamination composed of siltstone and claystone (GL-SC), organic pores account for 71.6% and 61.4% of the total, and dense bedding parallel and non-parallel fractures intersect to form connective networks. In the interlaminated lamination composed of siltstone and claystone (IL), grading lamination composed of claystone (GL-C) and structureless beds (SB), organic pores merely account for 20% to 51.8% of the total and minor isolated bedding parallel fractures occur. Among five depositional structure types, the PL and GL-SC have the highest porosity, permeability, TOC content, siliceous content, organic pore proportions, and ratios of horizontal to vertical permeability, which help them become shale gas exploration and development targets. [ABSTRACT FROM AUTHOR]

The abundant reserve of shale gas in Sichuan Basin has become a significant natural gas component in China. To achieve efficient development of shale gas, it is necessary to analyze the stress state, pore pressure, and reservoir mechanical properties such that an accurate geomechanical model can be established. In this paper, Six wells of Neijiang-Dazu and North Rongchang (NDNR) Block were thoroughly investigated to establish the geomechanical model for the study area. The well log analysis was performed to derive the in-situ stresses and pore pressure while the stress polygon was applied to constrain the value of the maximum horizontal principal stress. Image and caliper data, mini-frac test and laboratory rock mechanics test results were used to calibrate the geomechanical model. The model was further validated by comparing the model prediction against the actual wellbore failure observed in the field. It was found that it is associated with the strike-slip (SS) stress regime; the orientation of SHmax was inferred to be 106–130° N. The pore pressure appears to be approximately hydrostatic from the surface to 1000 m true vertical depth (TVD), but then becomes over-pressured from the Xujiahe formation. The geomechanical model can provide guidance for the subsequent drilling and completion in this area and be used to effectively avoid complex drilling events such as collapse, kick, and lost circulation (mud losses) along the entire well. Also, the in-situ stress and pore pressure database can be used to analyze wellbore stability issues as well as help design hydraulic fracturing operations. [ABSTRACT FROM AUTHOR]

The fractured-vuggy carbonate reservoirs display strong heterogeneity and need to be classified into different types for specific characterization. In this study, a total of 134 cores from six drilled wells and six outcrops of the Deng #2 and Deng #4 members of the Dengying Formation (Sichuan Basin, Southwest China) were selected to investigate the petrographic characteristics of void spaces in the fractured-vuggy carbonate reservoirs. Four void space types (VSTs) were observed, namely the solution-filling type (SFT), cement-reducing type (CRT), solution-filling breccia type (SFBT) and solution-enlarging fractures and vugs type (SEFVT). The CRT void spaces presented the largest porosity and permeability, followed by the SEFVT, SFBT and SFT. The VSTs presented various logging responses and values, and based on these, an identification method of VSTs using Bayes discriminant analysis (BDA) was proposed. Two test wells were employed for the validation of the identification method, and the results show that there is good agreement between the identification results and core description. The vertical distribution of VSTs indicates that the SFT and SEFVT are well distributed in both the Deng #2 and Deng #4 members. The CRT is mainly found in the Deng #2 member, and the SFBT occurs in the top and middle of the Deng #4 member. [ABSTRACT FROM AUTHOR]