Search

After more than 10 years of exploration, development, research, and practical efforts, China has opened up new perspectives for the commercial exploitation of marine shale gas. While high shale gas production is a main driver for energy security and economic development in China, there have been few attempts to systemically scientific analysis the challenges, prospect, development strategies, and goals for shale gas. Here, we present a detailed comparison of the differences in shale gas between the Sichuan Basin and North America from multiple dimensions, explain how and to what extent recent advances have been made, discuss the current challenges, and provide strategies to deal with these challenges. We demonstrate that a total of 13 graptolite zones developed in the Wufeng–Longmaxi Formations, achieved by representative cores from 32 coring wells and 7 outcrop profiles, can establish the chronostratigraphic framework in the Sichuan Basin, which leads to the potential impact of high-quality reservoir distribution and shale gas production. Shale gas is still faced with the challenges of complex underground and surface conditions, low single-well EUR, and immature deep development engineering technology. To circumvent these issues, here, we propose several strategies, including sweet-spot optimization, low-cost drilling techniques, and efficient fracturing technologies. Our results strengthen the importance of adopting fundamental theoretical research and practical and feasible development goals to realize more commercial discoveries of shale gas of diverse types and higher growth of shale gas reserves and production. [ABSTRACT FROM AUTHOR]

The mismatching between the multi-scale feature of complex fracture networks (CFNs) in unconventional reservoirs and their current numerical approaches is a conspicuous problem to be solved. In this paper, the CFNs are divided into hydraulic macro-fractures, induced fractures, and natural micro-fractures according to their mode of origin. A hybrid model coupling various numerical approaches is proposed to match the three-dimensional multi-scale fracture networks. The macro-fractures with high-conductivity and wide-aperture are explicitly characterized by a mimetic Green element method-based hierarchical fracture model. The induced fractures and natural micro-fractures that have features of low-conductivity and small-openings are upscaled to the dual-medium grid and enhanced matrix grid through the equivalent continuum-medium method, respectively. Subsequently, some benchmark cases are implemented to confirm the high-precision and high-robustness of the proposed hybrid model that indeed accomplishes accurate modeling of fluid flow in multi-scale CFNs by comparing with commercial software tNavigator®. Furthermore, an integrated workflow of simulation modeling for multiscale CFNs combined with a field example in Sichuan from China is used to analyzing the production information of fractured horizontal wells in shale gas reservoirs. Compared with the field production data from this typical well, it can be proved that the hybrid model has strong reliability and practicability. [ABSTRACT FROM AUTHOR]

Deep marine shale gas reservoirs are extremely rich in the Sichuan basin in China. However, due to the in situ conditions with high temperature and high pressure (HTHP), in particular reservoir pressure being usually much higher than the test pressure, it is difficult to accurately clarify the adsorption behavior, as seepage theory plays an important role in shale gas reserves evaluation. Therefore, three kinds of sorbent, including illite, quartz and kerogen, and two simulation methods, containing the grand canonical ensemble Monte Carlo method and molecular dynamics method, are synthetically used to determine the methane adsorption behavior under HTHP. The results show that both absolute adsorption and excess adsorption decrease with the increase of temperature. When the pressure increases, the absolute adsorption increases quickly and then slowly, and the excess adsorption first increases and then decreases. The superposition of wall potential energy is strongest in a circular hole, second in a square hole, and weakest in a narrow slit. The effect of pore size increases with the decrease of the pore diameter. Under HTHP, multi-layer adsorption can occur in shale, but the timing and number of layers are related to the sorbent type. [ABSTRACT FROM AUTHOR]

An accurate understanding of formation and gas properties is crucial to the efficient development of shale gas resources. As one kind of unconventional energy, shale gas shows significant differences from conventional energy ones in terms of gas accumulation processes, pore structure characteristics, gas storage forms, physical parameters, and reservoir production modes. Traditional experimental techniques could not satisfy the need to capture the microscopic characteristics of pores and throats in shale plays. In this review, the uniqueness of shale gas reservoirs is elaborated from the perspective of: (1) geological and pore structural characteristics, (2) adsorption/desorption laws, and (3) differences in properties between the adsorbed gas and free gas. As to the first aspect, the mineral composition and organic geochemical characteristics of shale samples from the Longmaxi Formation, Sichuan Basin, China were measured and analyzed based on the experimental results. Principles of different methods to test pore size distribution in shale formations are introduced, after which the results of pore size distribution of samples from the Longmaxi shale are given. Based on the geological understanding of shale formations, three different types of shale gas and respective modeling methods are reviewed. Afterwards, the conventional adsorption models, Gibbs excess adsorption behaviors, and supercritical adsorption characteristics, as well as their applicability to engineering problems, are introduced. Finally, six methods of calculating virtual saturated vapor pressure, seven methods of giving adsorbed gas density, and 12 methods of calculating gas viscosity in different pressure and temperature conditions are collected and compared, with the recommended methods given after a comparison. [ABSTRACT FROM AUTHOR]

Water uptake induced by fluid–rock interaction plays a significant role in the recovery of flowback water during hydraulic fracturing. However, the existing accounts fail to fully acknowledge the significance of shale anisotropy on water uptake typically under in situ reservoir temperature. Thus we investigated the shale-hydration anisotropy using two sets of shale samples from the Longmaxi Formation in Sichuan Basin, China, which are designated to imbibe water parallel and perpendicular to shale bedding planes. All the samples were immersed in distilled water for one to five days at 80 °C or 120 °C. Furthermore, samples' topographical and elemental variations before and after hydration were quantified using energy-dispersive spectroscopy–field-emission scanning electron microscopy. Our results show that shale anisotropy and imbibition time strongly affect the width of pre-existing micro-fracture in hydrated samples. For imbibition parallel to lamination, the width of pre-existing micro-fracture initially decreases and leads to crack-healing. Subsequently, the crack surfaces slightly collapse and the micro-fracture width is enlarged. In contrast, imbibition perpendicular to lamination does not generate new micro-fracture. Our results imply that during the flowback process of hydraulic fracturing fluid, the shale permeability parallel to bedding planes likely decreases first then increases, thereby promoting the water uptake. [ABSTRACT FROM AUTHOR]

In order to effectively evaluate shale gas reservoirs with low porosity, extra-low permeability, and no natural productivity, dipole array acoustic logging, which can provide various types of information including P-wave slowness (DTC) and S-wave slowness (DTS), is widely used. As the dipole array acoustic logging tool has a larger investigation depth and is suitable for complex borehole environments, such as those with a high wellbore temperature, high drilling fluid column pressure, or irregular borehole wall, it has been mainly applied to the evaluation of lithology, gas potential, fractures, and stimulation potential in shale gas reservoirs. The findings from a case study of the Sichuan Basin in China reveal that the acoustic slowness, S-P wave slowness ratio (RMSC), and S-wave anisotropy of the dipole array acoustic logging can be used to qualitatively identify reservoir lithology, gas potential, and fractures. Using the relationship between DTC and the total porosity of shale gas reservoirs, and combined with the compensated neutron (CNL) and shale content (Vsh) of the reservoir, a mathematical model for accurately calculating the total porosity of the shale gas reservoir can be established. By using the relationship between the RMSC and gas saturation in shale gas reservoirs and tied with density log (DEN), a mathematical model of gas saturation can be established, and the determination of gas saturation by the non-resistivity method can be achieved, delivering a solution to the issue that the electric model is not applicable under low resistivity conditions. The DTS, DTC, and DEN of shale can be used to calculate rock mechanic parameters such as the Poisson's ratio (POIS) and Young's modulus (YMOD), which can be used to evaluate the shale stimulation potential. [ABSTRACT FROM AUTHOR]