Search

Global warming, pollution, and increasing energy demand have compelled electrification of the transport sector. Electric vehicles are not only an attractive and cleaner mode of transport, but they also possess the capacity to offer flexible storage alternative based on bidirectional vehicle-to-grid schemes. Vehicle-to-grid or V2G technology permits electric vehicles' batteries to store energy and discharge it back to the power grid during peak-load periods. However, the feasibility and economic viability of V2G is still a matter of concern and needs investigation. In this paper, the authors delved into the feasibility of V2G technology by analysing the real time-charging data of a V2G demonstration project named EV-elocity, located at the University of Nottingham campus in the UK. The authors analysed the charging data and trip-status data of two charging sites and put forward some insights regarding the feasibility of V2G and the behavioural traits of the vehicles. This paper will enlighten the research community regarding the feasibility and benefits of V2G in a real-world environment by analysing the charging/discharging and vehicle behaviour and reporting the opportunities and benefits of vehicle-to-grid technology. [ABSTRACT FROM AUTHOR]

As the penetration of renewable energy sources into a power system increases, the significance of precise short-term forecasts for wind power generation becomes paramount. However, the erratic and non-periodic nature of wind poses challenges in accurately predicting the output. This paper presents a comprehensive investigation into forecasting wind power generation for the following day, using three machine learning models: long short-term memory (LSTM), convolutional neural network-bidirectional LSTM (CNN-biLSTM), and light gradient boosting machine (LGBM). In addition, this paper proposes a method to improve the prediction performance of LGBM by separating data according to the distribution of features, and training and testing each separated dataset with a distinct model. This study includes a comparative analysis of the performance of the proposed models in predicting wind turbine output, offering valuable insights into their respective efficiencies. The results of this investigation were analyzed for two geographically distinct wind farms (Korea and the UK). The findings of this study are expected to facilitate the selection of efficient prediction models within the forecast accuracy auxiliary service market and assist grid operators in ensuring reliable power supply for the grid. [ABSTRACT FROM AUTHOR]

Hydrogen is an emerging technology changing the context of heating with cleaner combustion than traditional fossil fuels. Studies indicate the potential to repurpose the existing natural gas infrastructure, offering consumers a sustainable, economically viable option in the future. The integration of hydrogen in combined heat and power systems could provide residential energy demand and reduce environmental emissions. However, the widespread adoption of hydrogen will face several challenges, such as carbon dioxide emissions from the current production methods and the need for infrastructure modification for transport and safety. Researchers indicated the viability of hydrogen in decarbonizing heat, while some studies also challenged its long-term role in the future of heating. In this paper, a comprehensive literature review is carried out by identifying the following key aspects, which could impact the conclusion on the overall role of hydrogen in heat decarbonization: (i) a holistic view of the energy system, considering factors such as renewable integration and system balancing; (ii) consumer-oriented approaches often overlook the broader benefits of hydrogen in emission reduction and grid stability; (iii) carbon capture and storage scalability is a key factor for large-scale production of low-emission blue hydrogen; (iv) technological improvements could increase the cost-effectiveness of hydrogen; (v) the role of hydrogen in enhancing resilience, especially during extreme weather conditions, raises the potential of hydrogen as a flexible asset in the energy infrastructure for future energy supply; and finally, when considering the UK as a basis case, (vi) incorporating factors such as the extensive gas network and unique climate conditions, necessitates specific strategies. [ABSTRACT FROM AUTHOR]

The availability of empirical energy data from Advanced Metering Infrastructure (AMI)—which includes household smart meters—has enabled residential energy demand to be characterised in different forms. This paper first presents a literature review of applications of measured electricity, gas, and heat consumption data at a range of temporal resolutions, which have been used to characterise and develop an understanding of residential energy demand. User groups, sectors, and policy areas that can benefit from the research are identified. Multiple residential energy demand datasets have been collected in the UK that enable this characterisation. This paper has identified twenty-three UK datasets that are accessible for use by researchers, either through open access or defined processes, and presents them in an inventory containing details about the energy data type, temporal and spatial resolution, and presence of contextual physical and socio-demographic information. Thirteen applications of data relating to characterising residential energy demand have been outlined in the literature review, and the suitability of each of the twenty-three datasets was mapped to the thirteen applications. It is found that many datasets contain complementary contextual data that broaden their usefulness and that multiple datasets are suitable for several applications beyond their original project objectives, adding value to the original data collection. [ABSTRACT FROM AUTHOR]

This paper presents a comparative analysis of the effects of short-range and long-range electric vehicles charging on transformer life. Long-range vehicles are expected to become more common in the future. They have higher battery capacity and charge at higher power levels, modifying demand profile. A probabilistic analysis is performed using the Monte Carlo Simulation, evaluating the transformer hottest-spot temperature and the aging acceleration factor. Residential demand is modeled based on real electricity measurements, and EVs' demand is modeled based on real data collected from a trial project developed in the United Kingdom. Simulations are conducted considering the influence of ambient temperature analyzing summer and winter seasons and several EV penetration levels. Results show the impacts caused by long-range vehicles are more severe because they charge at higher power levels, especially during winter, when residential demand is higher. For penetration level of 50% during summer, the use of long-range EVs brings a minimum equivalent aging factor of 5.2, which means the transformer aged 124.8 h in a cycle of only 24 h, decreasing its lifetime. [ABSTRACT FROM AUTHOR]

This paper presents a novel hardware-in-the-loop (HIL) approach as used to investigate the impact of the reduction in inertia on the Great Britain (GB) electrical power system with regard to rate of change of frequency (RoCoF) settings for Loss-of-Mains (LoM) protection. Furthermore, the research as presented in this paper updates, enhances, and validates a reduced model of the Great Britain transmission system, as originally developed in DIgSILENT PowerFactory by the National Grid Electricity System Operator. The enhanced model has been developed for integrated use with the OPAL-RT real-time HIL simulation toolkit and is validated against phasor measurement unit (PMU) data from actual disturbance events using novel automated interfacing between both integrated simulation platforms, PowerFactory from DIgSILENT and ePHASORSIM from OPAL-RT. The corresponding simulations show that the updated reduced model is capable of capturing the dynamic behaviour of the GB transmission system, including both local and inter-area oscillations, with satisfactory accuracy. Finally, the paper presents HIL study results with the reduced model to investigate the influence of decreasing system inertia on the response of LoM protection relays. The studies show that decreasing system inertia may have a significant impact on LoM relays using RoCoF detection, particularly relays using the legacy G59 setting of 0.125 Hz/s. Initial studies have also demonstrated the potential for a previously unrecognised interaction between system oscillations and the 500 ms operating delay, as specified in G59 and G99 Engineering Recommendations. Consequently, faster local oscillations (>1 Hz) reset the relay and decrease the sensitivity, whereas slower inter-area oscillations (<1 Hz) appear to cause the relay to overestimate the average RoCoF. [ABSTRACT FROM AUTHOR]

Energy storage systems are undergoing a transformative role in the electrical grid, driven by the introduction of innovative frequency response services by system operators to unlock their full potential. However, the limited energy storage capacity of these systems necessitates the development of sophisticated energy management strategies. This paper investigates the newly introduced frequency response service, Dynamic Regulation, within the Great Britain electrical grid. Our study not only establishes control parameters but also demonstrates a novel approach to energy management that pushes the boundaries of the allowable service envelope. We present two distinctive control methods, the first serving as a reference for standard response, and the second as a dynamic control approach, exploiting the extremities of the allowable service envelope. A comprehensive sensitivity analysis that considers availability, the number of equivalent full cycles, and cost–revenue analysis based on grouped dynamic control state of charge setpoints is carried out. Our results underscore that the optimization of average availability takes precedence over merely minimizing the number of cycles, which leads us to define a target state of charge range of between 40% and 45% for a 1-h battery to achieve an availability >95%. Furthermore, our study presents simulated results utilizing real-world frequency data, which reveal the transformative potential of the latter control method. By enhancing the availability of battery energy storage systems, this innovative approach promises not only higher revenues for the asset owner but also assists the system operator in managing frequency. [ABSTRACT FROM AUTHOR]

Local authorities are well placed to realise co-benefits of integrated local energy systems; however, in the UK they have no statutory energy mandate. Planning and developing clean energy are discretionary, and persistent budget reductions, combined with the lack of strategic direction from the UK government for more localised energy provision, limit local capacity, expertise and resources. Nevertheless, some local authorities have led energy initiatives but have been unable to stimulate investment at the pace and scale required to align with net zero greenhouse gas targets. Using evidence from such initiatives, this paper discusses the institutional changes needed to enable local authorities to act. It examines existing climate and local energy plans, and their integral socio-economic value. Using this evidence, investment opportunities from locally led net zero programmes are identified. EU technical assistance funds provided a particularly successful route to local energy developments: based on value of investment secured against initial funding, it is estimated that GBP 1 million technical assistance funding to every local authority would lead to GBP 15 billion investment in local energy. Other potential funding innovations are assessed and the paper concludes with recommendations for policy and resource measures needed to convert local ambition into clean energy and energy saving investment at scale. [ABSTRACT FROM AUTHOR]

Atmospheric carbon dioxide emanating from activities associated with the construction of buildings in the UK contributes approximately 16% of the uk's total emissions and will need to be reduced significantly to meet international agreements. Against this scenario, this paper presents a novel perspective for carbon accounting and trading that proposes the use of a platform for the uk construction industry as a possible solution. This suggestion assumes that taxation should be synchronised with phases of the entire life cycle of the building and that tax credits (or deficits) should remain an asset of the building itself. In this regard, a strategy is in place in the uk, but with gaps in how it will be implemented. To resolve these gaps, firstly, this paper explores and integrates three socio-technical components (i.e., carbon accounting, trading, and certification) that form an essential set of tools required for the management of taxes directed at property developers and construction companies. Then, it points out the need for a suite of computer-based systems to facilitate the recording of emissions information, the purchase of carbon offsets, and a way to access specialist financial services. As a result, a trading platform is conceptualised that makes use of blockchain technology as a foundation for future research. [ABSTRACT FROM AUTHOR]

The UK has one of the least energy-efficient housing stocks in Europe. By 2030, the emissions from UK homes need to fall by at least 24% from 1990 levels to meet the UK's ambitious goal, which is reaching net-zero emissions. The originality of this paper is to apply the building typology approach to predict energy savings of the UK housing stock under a step-by-step energy retrofit scenario, targeting the Passive House Standard for refurbishments of existing buildings, namely the EnerPHit "Quality-Approved Energy Retrofit with Passive House Components." The typologies consist of twenty reference buildings, representative of five construction ages and four building sizes. The energy balance of the UK residential buildings was created and validated against statistical data. A building stock retrofit plan specifying the order in which to apply energy efficiency measures was elaborated, and energy savings were calculated. The predicted total energy demand for the UK residential building stock for the year 2022 is 37.7 MTOE, and the carbon emissions estimation is 65.33 MtCO2e. The energy-saving potential is 87%, and carbon reductions are about 76%, considering all the steps of renovation applied. It has been demonstrated that the step that provides the biggest savings across the housing stock is the one that involves replacing windows, draught-proofing, and installing mechanical ventilation with heat recovery. [ABSTRACT FROM AUTHOR]

The increased use of distributed energy resources, especially electrical energy storage systems (EESS), has led to greater flexibility and complexity in power grids, which has led to new challenges in the operation of these systems, with particular emphasis on frequency regulation. To this end, the transmission system operator in Great Britain has designed a control scheme known as Enhanced Frequency Response (EFR) that is especially attractive for its implementation in EESS. This paper proposes a Type-2 fuzzy control system that enables the provision of EFR service from a battery energy storage system in order to improve the state-of-charge (SoC) management while providing EFR service from operating scenarios during working and off-duty days. The performance of the proposed controller is compared with a conventional FLC and PID controllers with similar features. The results showed that in all scenarios, but especially under large frequency deviations, the proposed controller presents a better SoC management in comparison without neglecting the EFR service provision. [ABSTRACT FROM AUTHOR]

Deploying smart local energy engagement tools (SLEETs) in local energy projects enables users to better observe and control energy, and potentially become active participants in local energy management. Using a cross-project approach, this paper examines the prevalence, effectiveness and inclusiveness of 84 SLEETs deployed in 72 local energy projects in the UK from 2008 to 2018. An original framework for the characterisation of SLEETs was employed, which grouped them into seven types and characterised them in terms of their level of interaction and interface design. Our study shows that information-driven tools were the most popular in community energy groups, while digital energy platforms or interaction tools with numeric interfaces were the most popular in smart local energy system (SLES) initiatives. In contrast, interaction tools with visual interfaces, and tools offering control were found to be less popular. Spatial analysis revealed that SLEETs were mostly deployed in areas with grid constraints (technology), active community energy groups (people) and engaged local authorities (policy). Effective SLEETs were found to stimulate engagement amongst people (social engagement), and between people and technology (operation and control), while inclusive SLEETs enabled the inclusion of vulnerable and low-income households. The acceptance and implementation of SLES initiatives can be enhanced by creating effective and inclusive SLEETs that align with local users' requirements and are supported by local stakeholders in order to foster trust. In future, there is a need to develop appropriate metrics (key performance indicator) or scoring methods to measure the prevalence, effectiveness, and inclusiveness of SLEETs in a consistent manner. [ABSTRACT FROM AUTHOR]

Given the fundamental role of renewable energy assets in achieving global temperature control targets, new energy management methods are required to efficiently match intermittent renewable generation and demand. Based on analysing various designed cases, this paper explores a number of heuristics for a smart battery scheduling algorithm that efficiently matches available power supply and demand. The core of improvement of the proposed smart battery scheduling algorithm is exploiting future knowledge, which can be realized by current state-of-the-art forecasting techniques, to effectively store and trade energy. The performance of the developed heuristic battery scheduling algorithm using forecast data of demands, generation, and energy prices is compared to a heuristic baseline algorithm, where decisions are made solely on the current state of the battery, demand, and generation. The battery scheduling algorithms are tested using real data from two large-scale smart energy trials in the UK, in addition to various types and levels of simulated uncertainty in forecasts. The results show that when using a battery to store generated energy, on average, the newly proposed algorithm outperforms the baseline algorithm, obtaining up to 20–60% more profit for the prosumer from their energy assets, in cases where the battery is optimally sized and high-quality forecasts are available. Crucially, the proposed algorithm generates greater profit than the baseline method even with large uncertainty on the forecast, showing the robustness of the proposed solution. On average, only 2–12% of profit is lost on generation and demand uncertainty compared to perfect forecasts. Furthermore, the performance of the proposed algorithm increases as the uncertainty decreases, showing great promise for the algorithm as the quality of forecasting keeps improving. [ABSTRACT FROM AUTHOR]

Deep geothermal energy can aid in the decarbonization of heat within the UK; this is required to meet net zero carbon emissions targets by 2050. The Cheshire Basin represents a significant opportunity for the development of deep geothermal resources; there are vast quantities of high permeability sandstones in hydraulic continuity, with temperatures favorable for direct heat use and, potentially, for power generation. Newly produced basal temperature maps in this study indicate the likely maximum temperatures for the basin, with the hottest temperature expected to be between 100 and 131.2 °C in the Crewe area. There have also previously been a range of estimates highlighting a geothermal resource within the basin to be in the region of 44.1 to 75 × 1018 J; however, previous estimates for heat in place are limited to simple volumetric or geometrical constraints. Therefore, this paper uses digitized depth and temperature maps to provide new estimates for the heat in place. Results suggest the resource has been underestimated and there is a need for more detailed evaluation. Depending on the geothermal gradient, the resource could be between 91 and 144 × 1018 J (1.26 to 1.45 × 1017 J/km2). Although there is a significant amount of heat in place, geological issues preventing development remain, such as the uncertainty in the quality of the reservoir at depth due to data limitations and the lateral continuity of the Manchester Marls Formation, which could act as a barrier to flow. Nevertheless, further regional assessment of the basin and data acquisition is required to build confidence in the reservoir quality and reduce uncertainty. This could unlock the basin for geothermal development. [ABSTRACT FROM AUTHOR]

It is a truism that whole energy system models underpin the development of policies for energy system decarbonisation. However, recent reviews have thrown doubt on the appropriateness of such models for addressing the multiple goals for future energy systems, in the face of emergent real-world complexity and the evolution of stakeholder's priorities. Without an understanding of the changing priorities of policy makers and expectations of stakeholders for future systems, system objectives and constraints are likely to be ill-defined, and there is a risk that models may be inadvertently instrumentalised. Adopting a system architecture perspective, the authors have undertaken a three-year programme of research to explore strategies for decarbonising heat in the UK, with interaction with and elicitation of needs from stakeholders at its heart. This paper presents the procedure, methods, and results of an exercise in which experts from stakeholder organisations across the energy system were interviewed. Analysis of interview data reveals two broad approaches to heat decarbonisation which can be defined as either adaptive or transformative. Specific insights gained from these interviews enabled our modelling teams to refocus their work for exploration with a wider circle of stakeholders. Results suggests that this iterative approach to formalising model-policy interaction could improve the transparency and legitimacy of modelling and enhance its impact on policy making. [ABSTRACT FROM AUTHOR]

The way of control and operation of an electrical power system has been changing rapidly with the integration of renewable energy sources (RES). One of the emerging issues that require addressing is the capability of RES to participate in the restoration process upon a total or partial system failure. However, with the continuous shutdown of large-centralised generators, which traditionally provided the black start support together with the variability of RES, the restoration process becomes much more complex. Primarily, the RES should have enough capacity to energise the load at the time of the restoration. Nonetheless, due to significant advantages, there is an increasing trend to use RES to meet the local energy demand by large industrial customers. The flexibility of shifting loads together with the surplus of RE generation could support the system operator during the system energisation process after a blackout. This paper mainly focuses on identifying the capabilities and factors that should be accounted for to participate in the system restoration process by large industrial consumers. The case study conducted on a large-scale steel factory in the UK reveals the possibility of supporting the restoration process under the bottom-up approach. [ABSTRACT FROM AUTHOR]

The increasing Photovoltaic (PV) penetration in residential Low Voltage (LV) networks is likely to result in a voltage rise problem. One of the potential solutions to deal with this problem is to adopt a distribution transformer fitted with an On-Load Tap Changer (OLTC). The control of the OLTC in response to local measurements reduces the need for expensive communication channels and remote measuring devices. However, this requires developing an advanced decision-making algorithm to estimate the existence of voltage issues and define the best set point of the OLTC. This paper presents a decentralized data-driven control approach to operate the OLTC using local measurements at a distribution transformer (i.e., active power and voltage at the secondary side of the transformer). To do so, Monte Carlo simulations are utilized offline to produce a comprehensive dataset of power flows throughout the distribution transformer and customers' voltages for different PV penetrations. By the application of the curve-fitting technique to the resulting dataset, models to estimate the maximum and the minimum customers' voltages are defined and embedded into the control logic to manage the OLTC in real time. The application of the approach to a real UK LV feeder shows its effectiveness in improving PV hosting capacity without the need for remote monitoring elements. [ABSTRACT FROM AUTHOR]

Solar PV and battery energy storage (BES) costs for domestic consumers are constantly diminishing. On top of this, the end of the Feed-in-Tariff programme has significantly increased interest in combined PV + BES systems. In this paper, we explore the economics of domestic PV + BES systems, extending the current literature on the topic via the use of a large smart meter dataset and a demographic comparison. Predictably, time-varying tariffs and higher electricity prices generally strengthen the economic arguments for PV + BES systems, however our consumption data yields a wide range of Net Present Values for different consumers. In terms of demographics, we find that batteries are more favourable for more affluent households due to their larger consumption levels, though profitability becomes more uniform if the batteries are tailored to individual households. This is an important point for policy, since it indicates that if PV + BES systems become widely profitable this is unlikely to help the financial situation of lower-income households. [ABSTRACT FROM AUTHOR]

In this paper, driving strategy optimization for a track is proposed for an energy efficient battery electric vehicle dedicated to the Shell Eco-marathon. A measurement-based mathematical vehicle model was developed to simulate the behavior of the vehicle. The model contains complicated elements such as the vehicle's cornering resistance and the efficiency field of the entire powertrain. The validation of the model was presented by using the collected telemetry data from the 2019 Shell Eco-marathon competition in London (UK). The evaluation of applicable powertrains was carried out before the driving strategy optimization. The optimal acceleration curve for each investigated powertrain was defined. Using the proper powertrain is a crucial part of energy efficiency, as the drive has the most significant energy demand among all components. Two tracks with different characteristics were analyzed to show the efficiency of the proposed optimization method. The optimization results are compared to the reference method from the literature. The results of this study provide an applicable vehicle modelling methodology with efficient optimization framework, which demonstrates 5.5% improvement in energy consumption compared to the reference optimization theory. [ABSTRACT FROM AUTHOR]

This paper analysed operational CO2 emissions from electricity grid interaction in photovoltaic prosumer dwellings in South Wales, UK. Operational CO2 emissions were quantified in four prosumer dwellings aiming to analyse (1) the differences in the result when time-varying data and static emission factors are used, and (2) the association of load-matching indicators to the results. Electricity balance data were obtained through monitoring (April 2020 to March 2021), and three sources for the grid's CO2 intensity were considered: (1) UK nationwide average time-varying values (UK), (2) South Wales (SW) average time-varying values and (3) the UK Government's official CO2 emissions factor (EF) for the study period. UK and SW grid CO2 intensity were obtained as dynamic data flows in a 30 min resolution, whereas EF was a year constant. Gross CO2 emissions calculated using SW data reached the highest emissions results: between 67.5% and 69.3% higher than the results obtained using the UK time-varying data, and between 41.1% and 45.1% higher than using the EF. The differences between the obtained yearly net emissions using dynamic data and the EF in each studied dwelling ranged between 6.2% and 294%. Results also show that the definition of geographic boundaries for location-based approach calculations can significantly affect the obtained emissions values. [ABSTRACT FROM AUTHOR]

The design of electricity markets determines the technologies, services and modes of operation that can access value, consequently shaping current and future electricity landscapes. This paper highlights that the efficacy of Great Britain's electricity market design in facilitating net zero is inadequate and must be reconfigured. The rules of the current electricity market design are remnants of an electricity sector dominated by large-scale, centralised, fossil fuel technologies. Therefore, routes to market for the provision of necessary services to support net zero, not least flexibility, are largely inaccessible for distributed energy resources and, despite their benefits to the system, are thus undervalued. Based upon a review and consolidation of 30 proposed electricity market designs from liberalised electricity sectors, this paper proposes a new electricity market design for Great Britain. This design is presented alongside a new institutional framework to aid in the efficient operation of the market. Specifically, this paper proposes a new local balancing and coordinating market located at each grid supply point (the transmission and distribution interface). This is realised through the implementation of a distributed locational marginal pricing structure which is governed by the evolution of the current distributed network operator, known as the distributed service provider (DSP). The DSP also operates a local balancing and ancillary market for their geographical area. The wholesale market is reconfigured to coordinate with these new local markets and to harmonise the actors across the distribution and transmission network. [ABSTRACT FROM AUTHOR]

The decommissioning of synchronous generators, and their replacement by decoupled renewable power plants, has a significant impact on the transient stability performance of a power system. This paper concerns with an investigation of the degree of transient stability enhancement that can be achieved in power systems with high shares (e.g., around 75%) of wind generation. It is considered that the wind generators can work either under the principle of current control or under the principle of fast local voltage control. In both cases, a power–angle modulation (PAM) controller is superimposed on the current control loops of the grid side converters of the wind generators. The investigation of the degree of enhancement takes into account different approaches of the tuning of PAM. It considers a simple approach in the form of parametric sensitivity, and also a sophisticated approach in the form of a formal optimization problem. Besides, the paper gives insight on what is a suitable objective function of the optimization problem, which entails the best performance of PAM. The whole investigation is conducted based on a synthetic model of the Great Britain (GB) system [ABSTRACT FROM AUTHOR]

This paper proposes a methodology for tuning a supervisory and frequency-response outer loop control system of a multi-terminal direct current (MTDC) grid designed to transmit offshore wind energy to an onshore AC grid, and to provide frequency support during over-frequency events. The control structure is based on a master–slave scheme and ensures the achievement of frequency response, with specific implementation of the UK national grid code limited-frequency sensitive (LFSM) and frequency-sensitive (FSM) modes. The onshore AC grid is modelled with an equivalent frequency-response model to simulate the onshore AC grid dynamics under frequency deviations. The main innovation of this paper is the development of a methodology for tuning simultaneously two hierarchical levels of a MTDC coordinated control structure, i.e., the MTDC supervisor, given by the active power set point for slave terminal, and the slope of frequency-response functions at onshore terminals. Based on these two hierarchical levels, different strategies are evaluated in terms of frequency peak reductions and change of the frequency order type. Moreover, tuning guidance is given when a different MTDC control structure or different synchronous generator characteristics of the onshore AC grid are considered. [ABSTRACT FROM AUTHOR]

Energy storage will be required over a wide range of discharge durations in future zero-emission grids, from milliseconds to months. No single technology is well suited for the complete range. Using 9 years of UK data, this paper explores how to combine different energy storage technologies to minimize the total cost of electricity (TCoE) in a 100% renewable-based grid. Hydrogen, compressed air energy storage (CAES) and Li-ion batteries are considered short-, medium-, and long-duration energy stores, respectively. This paper analyzes different system configurations to find the one leading to the lowest overall cost. Results suggest that the UK will need a storage capacity of ~66.6 TWh to decarbonize its grid. This figure considers a mix of 85% wind + 15% solar-photovoltaics, and 15% over-generation. The optimum distribution of the storage capacity is: 55.3 TWh in hydrogen, 11.1 TWh in CAES and 168 GWh in Li-ion batteries. More than 60% of all energy emerging from storage comes from medium-duration stores. Based on current costs, the storage capacity required represents an investment of ~£172.6 billion, or approximately 8% of the country's GDP. With this optimum system configuration, a TCoE of ~75.6 £/MWh is attained. [ABSTRACT FROM AUTHOR]

This paper articulates the potential implications of Brexit on energy policy and security in the United Kingdom (UK). Given the uncertainties associated with the decision to leave the European Union (EU), the need to consider its potential effects on the UK's energy sector becomes even more pertinent. Through the lens of a few widely reviewed trade regimes in the light of Brexit, it can be observed that while UK energy policies are unlikely to change drastically, Brexit nevertheless threatens the UK's capacity to safeguard its energy supply. The uncertainties following Brexit could arguably starve the UK's upstream petroleum, electricity, and renewable energy sectors of their required investments. Both short and long-term impacts could result in UK residents paying more per unit of energy consumed in a "hard Brexit" scenario, where the UK exits the Internal Energy Market (IEM) and must trade with the EU underWorld Trade Organisation rules. While a hard Brexit could aid the growth of the nascent shale gas industry, a negotiated withdrawal that includes some form of access to the IEM (a "soft Brexit") would be more beneficial for the future of energy security in the UK. [ABSTRACT FROM AUTHOR]

Waste from scrap tyres, due to its high volume (17 million Mg per year) and durability resulting from the physical and chemical properties, requires innovative approaches for efficient and environmentally friendly management. In many countries, the landfilling of waste tyres is banned (e.g., EU, USA, UK); however, waste tyres can be a source of valuable materials such as carbon black, pyrolysis oil, hydrogen-rich syngas, tyre char, as well as energy. The purpose of this article is to provide a synthesis of the state of knowledge regarding the thermal conversion of waste tyres by pyrolysis and gasification, taking into account the use of different measurement techniques and reactor types. These technologies are forward-looking and have a high degree of flexibility in terms of product sourcing, depending on the process conditions. The properties of waste from used tyres were analysed, i.e., the composition of the content of individual components and the main chemical substances. The results encompassed ultimate and proximate analyses of rubber from tyres, as well as the physical and chemical parameters of the tyre char obtained through pyrolysis. This article compiles available literature data regarding the impact of process and raw material parameters, such as temperature and time conditions, pressure, particle size, and catalyst addition on the pyrolysis and gasification processes. It also explores the influence of these factors on the yield and properties of the products, including pyrolysis oil, gas, synthesis gas, and tyre char. [ABSTRACT FROM AUTHOR]

Renewable energy (RE) is one of the most popular public policy orientations worldwide. Compared to some other countries and continents, Europe has gained an early awareness of energy and environmental problems in general. At the theoretical level, free-market environmentalism indicates that based on the principle of private property rights, with fewer state interventionist and regulation policies, entrepreneurs, as the driving force of the market economy, can provide better services to meet the necessity of offering RE to protect the environment more effectively. Previous studies have revealed that Germany, Denmark, and the United Kingdom have made some progress in using the market to develop RE. However, this research did not analyze the three countries' RE conditions from the perspective of free-market environmentalism. Based on our review of the principles of free-market environmentalism, this paper originally provides an empirical study of how Germany, Denmark, and the United Kingdom have partly conducted free-market-oriented policies to successfully achieve their policy goal of RE since the 1990s on a practical level. In particular, compared with Germany and Denmark, the UK has maintained a relatively low energy tax rate and opted for more pro-market measures since the Hayekian-Thatcherism free-market reform of 1979. The paper also discovers that Fredrich A. Hayek's theories have strongly impacted its energy liberalization reform agenda since then. Low taxes on the energy industry and electricity have alleviated the burden on the electricity enterprises and consumers in the UK. Moreover, the empirical results above show that the energy enterprises play essential roles in providing better and more affordable RE for household and industrial users in the three sampled countries. Based on the above results, the paper also warns that state intervention policies such as taxation, state subsidies, and industrial access restrictions can impede these three countries' RE targets. Additionally, our research provides reform agendas and policy suggestions to policymakers on the importance of implementing free-market environmentalism to provide more efficient RE in the post-COVID-19 era. [ABSTRACT FROM AUTHOR]

Peer-to-peer (P2P) energy trading is emerging as a new mechanism for settling the exchange of energy between renewable energy generators and consumers. P2P provides a mechanism for local balancing when it is facilitated through distributed ledgers ('blockchains'). Energy communities across Europe have uncovered the potential of this technology and are currently running pilots to test its applicability in P2P energy trading. The aim of this paper is to assess, using legal literature and legislation, whether the legal forms available to energy communities in the United Kingdom (UK) can help resolve some of the uncertainties around the individual use of blockchain for P2P energy trading. This includes the legal recognition of 'prosumers', the protection of their personal data, as well as the validity of 'smart contracts' programmed to trade energy on the blockchain network. The analysis has shown that legal entities, such as Limited Liability Partnerships and Co-operative Societies, can play a crucial role in providing the necessary framework to protect consumers engaging in these transactions. This is particularly the case for co-operatives, given that they can hold members liable for not respecting the rules set out in their (compulsory) governing document. These findings are relevant to other European countries, where the energy co-operative model is also used. [ABSTRACT FROM AUTHOR]

Increasing levels of complexity, due to growing volumes of renewable generation with an associated influx of power electronics, are placing increased demands on the reliable operation of modern power systems. Consequently, phasor measurement units (PMUs) are being rapidly deployed in order to further enhance situational awareness for power system operators. This paper presents a novel data-driven event detection approach based on random matrix theory (RMT) and Kalman filtering. A dynamic Kalman filtering technique is proposed to condition PMU data. Both simulated and real PMU data from the transmission system of Great Britain (GB) are utilized in order to validate the proposed event detection approach and the results show that the proposed approach is much more robust with regard to event detection when applied in practical situations. [ABSTRACT FROM AUTHOR]

Power distribution networks are increasingly challenged by ageing plant, environmental extremes and previously unforeseen operational factors. The combination of high loading and weather conditions is responsible for large numbers of recurring faults in legacy plants which have an impact on service quality. Owing to their scale and dispersed nature, it is prohibitively expensive to intensively monitor distribution networks to capture the electrical context these disruptions occur in, making it difficult to forestall recurring faults. In this paper, localised weather data are shown to support fault prediction on distribution networks. Operational data are temporally aligned with meteorological observations to identify recurring fault causes with the potentially complex relation between them learned from historical fault records. Five years of data from a UK Distribution Network Operator is used to demonstrate the approach at both HV and LV distribution network levels with results showing the ability to predict the occurrence of a weather related fault at a given substation considering only meteorological observations. Unifying a diverse range of previously identified fault relations in a single ensemble model and accompanying the predicted network conditions with an uncertainty measure would allow a network operator to manage their network more effectively in the long term and take evasive action for imminent events over shorter timescales. [ABSTRACT FROM AUTHOR]

Decarbonising heavy-duty trucks is challenging due to high journey power and energy requirements. With a growing fleet of commercial vehicles in the UK, biomethane can provide significant reductions in greenhouse gas (GHG) emissions compared to fossil diesel. Methane is a potent GHG with a global warming potential (GWP) of 23–36, therefore reducing levels in the atmosphere can have a significant impact on climate change. There are a range of anthropogenic sources of methane that could be collected and processed to provide sustainable energy (upcycled), e.g., agricultural waste and the waste water system. This paper explores the impact of using upcycled methane in transport in South East England, evaluating local sources of anthropogenic methane and the environmental and economic impact of its use for a heavy-duty truck compared to fossil and battery electric alternatives. Analysis concludes that the use of upcycled methane in transport can provide significant reductions in lifecycle GHG emissions compared to diesel, fossil natural gas or battery electric trucks, and give net negative GHG emissions where avoided environmental methane emissions are considered. Furthermore, upcycling solutions can offer a lower cost route to GHG reduction compared to electrification. [ABSTRACT FROM AUTHOR]

Cities constitute three quarters of global energy consumption and the built environment is responsible for significant use of final energy (62%) and greenhouse gas emissions (55%). Energy has now become a strategic issue for local authorities (LAs) and can offer savings when budget cuts have threatened the provision of core services. Progressive LAs are exploring energy savings and carbon reduction opportunities as part of the sustainable and smart city agenda. This paper explores the role of citizens in smart city development as "buildings don't use energy: people do". Citizens have the potential to shape transitions towards smart and sustainable futures. This paper contributes to the growing evidence base of citizen engagement in low carbon smart cities by presenting novel insights and practical lessons on how citizen engagement can help in smart city development through co-creation with a focus on energy in the built environment. A case study of Nottingham in the UK, a leading smart city, is analysed using Arnstein's Ladder of Citizen Participation. Nottingham City Council (NCC) has pledged to keep "citizens at the heart" of its plans. This paper discusses learnings from two EU funded Horizon 2020 projects, REMOURBAN (REgeneration MOdel for accelerating the smart URBAN transformation) and eTEACHER, both of which aimed to empower citizens to reduce energy consumption and co-create smart solutions. Although these two projects are diverse in approaches and contexts, what unites them is a focus on citizen engagement, both face to face and digital. REMOURBAN has seen a "whole house" approach to retrofit in vulnerable communities to improve liveability through energy efficiency. User interaction and co-creation in eTEACHER has provided specifications for technical design of an energy saving App for buildings. eTEACHER findings reflect users' energy needs, understanding of control interfaces, motivations for change and own creative ideas. Citizens were made co-creators in eTEACHER from the beginning through regular communication. In REMOURBAN, citizens had a role in the procurement and bidding process to influence retrofit project proposals. Findings can help LAs to engage demographically diverse citizens across a variety of buildings and communities for low carbon smart city development. [ABSTRACT FROM AUTHOR]

Prompted by rising concern about weak consumer switching and the practice of price discrimination, over the period of 2016–2019, the Office of Gas and Electricity Markets (Ofgem) undertook a series of trials on communication-based interventions to encourage consumer switching in the United Kingdom. The main purpose of this paper is to assess the experience of these Ofgem trials with a view to draw some lessons for policy makers. The analytical framework adopted for this purpose is informed by existing literature on the barriers for consumer switching. The results of the analysis suggest that while the Ofgem trials have made positive impacts on consumer switching, these impacts varied significantly across the trials, suggesting that some interventions were more effective than others. Further, the overall impacts of the Ofgem trials were moderate, as around 70% of participants did not switch suppliers even in the most impactful trial. This reflects a general lack of understanding in the literature about the behaviour-influencing factors, their impacts, and their context-connects. By implication, the difficulty in stimulating consumer switching, as demonstrated by the Ofgem trials, suggests that weak consumer switching and the practice of price discrimination may simply reflect significant competition, rather than a lack of it, especially if retail margins are not greater than the competitive level. In this case, the communication-based intervention aimed at encouraging consumer switching may lead to further price discrimination, especially for the most vulnerable consumers, who are more likely to stay with their incumbent suppliers. [ABSTRACT FROM AUTHOR]

UK Feed-in Tariffs created a vibrant business ecosystem for the deployment of decentralised renewable energy technologies while constituting a regressive tax and increasing inequality. Business model innovation spurred by their withdrawal is providing valuable lessons for progressive policy design. Using the case study of solar PV deployment on multi-occupancy social housing, this paper reveals policy, business and organisational challenges that need to be overcome to address fuel poverty and reduce inequality. Suitable 'export' and 'local' business models were identified through a workshop and subsequently evaluated through qualitative thematic interview analysis. The 'local' model compares favourably in terms of production costs and benefits for fuel poor tenants but unfavourably in terms of transaction costs. Both models are considered equally susceptible to changes in policy. Their success hinges upon third party intermediaries, peer-to-peer learning and a supportive policy environment. This paper concludes with a policy recommendation to ensure that energy justice lies at the heart of the UK's transition to net-zero carbon through the fair distribution of costs and benefits by including specific provisions to protect low-income groups. [ABSTRACT FROM AUTHOR]

The number of battery energy storage systems (BESSs) installed in the United Kingdom and worldwide is growing rapidly due to a variety of factors, including technological improvements, reduced costs and the ability to provide various ancillary services. The aim of this paper is to carry out a comprehensive literature review on this technology, its applications in power systems and to identify potential future developments. At first, the main BESSs projects in the UK are presented and classified. The parameters provided for each project include rated power, battery technology and ancillary services provided, if any. In the next section, the most commonly deployed ancillary services are classified and described. At the same time, the nomenclature found in the literature is explained and harmonised. The second part of the paper focuses on future developments and research gaps: ancillary services that currently are not common but that are likely to be deployed more widely in the future will be described, and more general research topics related to the development of BESSs for power system applications will be outlined. [ABSTRACT FROM AUTHOR]

This paper proposes a methodology to assess the impact of alternative electricity generation and energy storage scenarios for meeting electricity demand on a national level. The method combines real and synthetic electricity generation and demand data to investigate different decarbonization strategies using solar and wind generation and electrical energy storage. This method is applied to provide relevant case studies for two geographically similar electricity systems in New Zealand and Great Britain. Newly available solar and wind data sets at hourly resolution are used within this method for these systems to assess the potential contribution of these technologies and as such, to refresh understanding of the impact of these technologies on decarbonization strategies against historical and future demand patterns. Although wind, solar and storage technologies are found to reduce the carbon emissions in both electricity systems, a key result is quantifying the impact this has on traditional generation as a backup resource. In New Zealand an investment in wind and solar equivalent to less than 15% of the wind/solar capacity in Great Britain is found to (i) reduce fossil fuel use to less than 2% of annual electricity generation requirements in the data assessed and (ii) remove the need for continuous operation of fossil fuel plants. Further, it is shown that existing hydro storage potential could be used to create near complete decarbonization of New Zealand electricity [ABSTRACT FROM AUTHOR]

Short-term building energy consumption forecasting is vital for energy conservation and emission reduction. However, it is challenging to achieve accurate short-term forecasting of building energy consumption due to its nonlinear and non-stationary characteristics. This paper proposes a novel hybrid short-term building energy consumption forecasting model, SSA-CNNBiGRU, which is the integration of SSA (singular spectrum analysis), a CNN (convolutional neural network), and a BiGRU (bidirectional gated recurrent unit) neural network. In the proposed SSA-CNNBiGRU model, SSA is used to decompose trend and periodic components from the original building energy consumption data to reconstruct subsequences, the CNN is used to extract deep characteristic information from each subsequence, and the BiGRU network is used to model the dynamic features extracted by the CNN for time series forecasting. The subsequence forecasting results are superimposed to obtain the predicted building energy consumption results. Real-world electricity and natural gas consumption datasets of office buildings in the UK were studied, and the multi-step ahead forecasting was carried out under three different scenarios. The simulation results indicate that the proposed model can improve building energy consumption forecasting accuracy and stability. [ABSTRACT FROM AUTHOR]

The Smart Meter Rollout Programme in the UK has required energy suppliers to offer new smart meters to customers to provide near real-time energy use information and enable two-way communication between the meter and the central system. The provision was expected to result in meaningful energy reductions, but recent estimates suggest that these reductions may be as low as 2%. This paper contributes to the ongoing debate about the effectiveness of smart meters and in-home energy displays by providing insights on energy feedback perceptions from a series of focus groups with postgraduate consumers. In addition to domestic energy use, the study investigated how participants perceived their energy use at work and how they perceived the energy reduction efforts of their institutions and employers. A laddered and projective methodology was used to more deeply question participant perceptions and reveal their attitudes. The analysis of responses revealed a limited awareness around energy efficiency strategies and opportunities for more visual, mobile, engaging and target-driven interfaces for energy data. The findings also agree with previous observations that environmental concerns are not a key driver of energy reduction behaviours. This was shown by laddered questioning, not to be due to a lack of environmental concern, but rather the perception that reducing energy consumption would have negligible impact. A decade after in-home energy displays enabled a means of providing 'visibility' to 'invisible' energy consumption, little appears to have changed in the perception and experience of energy feedback. [ABSTRACT FROM AUTHOR]

The increased frequency of heat-related mortality and morbidity in urban environments indicates the importance of urban climate studies. As most of the world's population lives in cities, the education of designers, planners and policy makers is crucial to promote urban sustainability This paper, firstly, focuses on the different factors causing the urban heat islands in large cities. Secondly, it considers how these factors are reflected in higher education programmes. Examples are shown from courses in UK higher education, explaining the common software tools used for simulating urban spaces, and student field measurements are drawn on to illustrate how urban climate studies are included in higher education curricula. Urban metabolism is used to conceptualise the main approach to systemic resource-use assessments and as a holistic framework to investigate the main drivers of the urban heat island phenomenon. To sum up, this paper reflects on the importance of training climatically-aware graduates from design schools. [ABSTRACT FROM AUTHOR]

Successful transitioning to a circular economy city requires a holistic and inclusive approach that involves bringing together diverse actors and disciplines who may not have shared aims and objectives. It is desirable that stakeholders work together to create jointly-held perceptions of value, and yet cooperation in such an environment is likely to prove difficult in practice. The contribution of this paper is to show how collaboration can be engendered, or discord made transparent, in resource decision-making using a hybrid Game Theory approach that combines its inherent strengths with those of scenario analysis and multi-criteria decision analysis. Such a methodology consists of six steps: (1) define stakeholders and objectives; (2) construct future scenarios for Municipal Solid Waste Management; (3) survey stakeholders to rank the evaluation indicators; (4) determine the weights for the scenarios criteria; (5) reveal the preference order of the scenarios; and (6) analyse the preferences to reveal the cooperation and competitive opportunities. To demonstrate the workability of the method, a case study is presented: The Tyseley Energy Park, a major Energy-from-Waste facility that treats over two-thirds of the Municipal Solid Waste of Birmingham in the UK. The first phase of its decision-making involved working with the five most influential actors, resulting in recommendations on how to reach the most preferred and jointly chosen sustainable scenario for the site. The paper suggests a supporting decision-making tool so that cooperation is embedded in circular economy adoption and decisions are made optimally (as a collective) and are acceptable to all the stakeholders, although limited by bounded rationality. [ABSTRACT FROM AUTHOR]

Due to the increasing use of renewable, non-controllable energy generation systems energy storage systems (ESS) are seen as a necessary part of future power delivery systems. ESS have gained research interest and practical implementation over the past decade and this is expected to continue into the future. This is due to the economic and operational benefits for both network operators and customers, battery energy storage system (BESS) is used as the main focus of this research paper. This paper presents an analytical study of the benefits of deploying distributed BESS in an electrical distribution network (DN). The work explores the optimum location of installing BESS and its impact on the DN performance and possible future investment. This study provides a comparison between bulk energy storage installed at three different locations; medium voltage (MV) side and low voltage (LV) side of the distribution transformer (DT) and distributed energy storage at customers' feeders. The performance of a typical UK DN is examined under different penetration levels of wind energy generation units and BESS. The results show that the minimum storage size is obtained when BESS is installed next to the DT. However, the power loss is reduced to its minimum when BESS and wind energy are both distributed at load busbars. The study demonstrates that BESS installation has improved the loss of life factor of the distribution transformer. [ABSTRACT FROM AUTHOR]

Upcycling presents one of many opportunities for reducing consumption of materials and energy. Despite recent growth evidenced by increasing numbers of practitioners and businesses based on upcycling, it remains a niche activity and requires scaling up to realise its potential benefits. This paper investigates UK household upcycling in order to develop interventions for scaling up upcycling in the UK. Mixed methods were used in four stages: (a) Interviews to gain insights into UK upcycling; (b) a survey to discover key factors influencing UK upcycling; (c) intervention development based on the synthesis of interviews and survey; and (d) use of a semi-Delphi technique to evaluate and develop initial interventions. The results showed approaches to upcycling (e.g., wood, metal and fabric as frequently used materials, online platforms as frequently used source of materials), context for upcycling (e.g., predominant use of home for upcycling), factors influencing UK upcycling with key determinants (i.e., intention, attitude and subjective norm), important demographic characteristics considering a target audience for interventions (i.e., 30+ females) and prioritised interventions for scaling up (e.g., TV and inspirational media and community workshops as short-term high priority interventions). The paper further discusses implications of the study in terms of development of theory and practice of upcycling. [ABSTRACT FROM AUTHOR]

Climate change has highlighted the need to promote renewable energies. The offshore wind industry is growing exponentially because of some political strategies supported by various organizations, such as the European Union. The implementation of these strategies is commonly associated with significant investments, public acceptance, or achieving better installations and greater cumulative capacities. To ensure that offshore renewable energy projects could reach their ambitious targets, this study promotes the implementation of political strategies or planning decisions using data mining techniques and analytical tools. Strategic decisions based on real data analysis could help to achieve more suitable and optimal infrastructures. The scour phenomenon jeopardizes the operability of offshore wind farms, making it necessary to study its evolution over the years. In this work, extensive research on the scour phenomenon in offshore wind farms using real data (from the Lynn and Inner Dowsing offshore wind farms located in the UK) was performed, which revealed an evident lack of consideration of this phenomenon for data-driven decision-making processes. As a novelty, this research develops a detailed geospatial analysis of data, studying the possible autocorrelation of scour data measured from each turbine between 2011 and 2015. The conclusions obtained could be used to improve future planning tasks in offshore wind farms. [ABSTRACT FROM AUTHOR]

The use of wind power has grown strongly in recent years and is expected to continue to increase in the coming decades. Solar power is also expected to increase significantly. In a power system, a continuous balance is maintained between total production and demand. This balancing is currently mainly managed with conventional power plants, but with larger amounts of wind and solar power, other sources will also be needed. Interesting possibilities include continuous control of wind and solar power, battery storage, electric vehicles, hydrogen production, and other demand resources with flexibility potential. The aim of this article is to describe and compare the different challenges and future possibilities in six systems concerning how to keep a continuous balance in the future with significantly larger amounts of variable renewable power production. A realistic understanding of how these systems plan to handle continuous balancing is central to effectively develop a carbon-dioxide-free electricity system of the future. The systems included in the overview are the Nordic synchronous area, the island of Ireland, the Iberian Peninsula, Texas (ERCOT), the central European system, and Great Britain. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive analysis of renewable and especially tidal energy through a political, economic, social, technology, legal and environmental (PESTLE) analysis approach and by reviewing the most up to date relevant literature. The study focuses on the United Kingdom given the favourable environmental resources for such technologies; the number of different design concepts that are currently under development as well as the research funding that has been invested over the last few years. Findings of the analysis identify the risks and multiple stakeholders involved at all stages of the tidal energy projects development from the conceptualization of the design, right through to decommissioning. Many of the stakeholders present benefits to the tidal developers through funding, incentives and knowledge sharing, but at the same time they also present potential risks to the future of projects. This is mostly down to different approaches of the most important aspect of tidal energy that needs to be considered, making it hard for technologists and developers to equally address all requirements. From this research it can be concluded that several of these risks can be mitigated early on providing that particular stakeholders are involved at the correct stage of a project. [ABSTRACT FROM AUTHOR]

To reach net-zero emissions by 2050, buildings in the UK need to replace natural gas boilers with heat pumps and district heating. These technologies are efficient at reduced flow/return temperatures, typically 55/25 °C, while traditional heating systems are designed for 82/71 °C, and an oversized heating system can help this temperature transition. This paper reviews how heating systems have been sized over time in the UK and the degree of oversizing in existing buildings. It also reviews if lessons from other countries can be applied to the UK's building stock. The results show that methods to size a heating system have not changed over time, but the modern level of comfort, the retrofit history of buildings and the use of margin lead to the heating system being generally oversized. It is not possible to identify a specific trend by age, use or archetype. Buildings in Scandinavia have a nascent readiness for low-temperature heat as they can use it for most of the year without retrofit. Limitations come primarily from the faults and malfunctions of such systems. In the UK, it is estimated that 10% of domestic buildings would be ready for a supply temperature of 55 °C during extreme external conditions and more buildings at part-load operation. Lessons from Scandinavia should be considered with caution. The building stock in the UK generally underperforms compared to other EU buildings, with heating systems in the UK operating at higher temperatures and with night set-back; the importance of providing a low-return temperature does not exist in the UK despite being beneficial for condensing boiler operation. Sweden and Denmark started to develop district heating technologies with limitations to supply temperatures some 40 years ago whereas the UK is only just starting to consider similar measures in 2021. Recommendations for policy makers in this context have been drawn from this review in the conclusions. [ABSTRACT FROM AUTHOR]

Most of the UK Continental Shelf (UKCS) oil and gas (OG) installations have traditionally adopted in situ power generation, which is not only inefficient but also generating about 70% of the offshore CO2 emissions. The offshore wind and energy storage technologies for deep water are developing at a fast pace, enabling great opportunities for the OG installations located in the North Sea. In this paper, a pathway for the UKCS offshore OG installations electrification is introduced. The aim is to provide different power architectures that facilitate the OG installations' electrification, while benefiting from the existing and planned UK offshore wind power. Four hypothetical case studies (based on real data) were created, along the UKCS, where the corresponding power architectures were proposed. The selection of each architecture power component (e.g., transformers, converters and cables), as well as the transmission and distribution technology (e.g., AC or DC), is also provided and justified. Further, an overview cost estimation is carried out to predict the architecture capital cost. It is concluded that the four architectures can be mimicked not only along the UKCS but also worldwide, promoting the UKCS potential for a world-leading offshore energy hub and fostering the UK offshore wind-energy resources. [ABSTRACT FROM AUTHOR]

Apart from numerous technical challenges, the transition towards a carbon-neutral energy supply is greatly hindered by limited economic feasibility of renewable energy sources. This results in their slow and bounded penetration in both commercial and residential sectors that are responsible for over 40% of final energy consumption. This paper aims to demonstrate that combined application of sophisticated planning methodologies at building-level and presents incentive mechanisms for renewables that can result in prosumers, featuring hybrid renewable energy systems (HRES), with economic performance comparable to that of conventional energy systems. The presented research enhances existing planning methodologies by integrating appliance-level demand side management into the decision process and investigates its effect on the planning problem. Moreover, the proposed methodology features an innovative and holistic approach that simultaneously assess electrical and thermal domain in both an isolated and grid-connected context. The analyzed hybrid system consists of solar photovoltaic, wind turbine and battery with thermal supply featuring solar thermal collector and a ground-source heat pump. Overall optimization problem is modeled as a mixed-integer linear program, while ranking of all feasible alternatives is made by the multicriteria decision-making algorithm against several technological, economic, and environmental criteria. A real-life scenario of energy system retrofit for a building in the United Kingdom was employed to demonstrate overall cost savings of 12% in the present market and regulation context. [ABSTRACT FROM AUTHOR]

The Smart Energy Research Lab (SERL) Observatory dataset described here comprises half-hourly and daily electricity and gas data, SERL survey data, Energy Performance Certificate (EPC) input data and 24 local hourly climate reanalysis variables from the European Centre for Medium-Range Weather Forecasts (ECMWF) for over 13,000 households in Great Britain (GB). Participants were recruited in September 2019, September 2020 and January 2021 and their smart meter data are collected from up to one year prior to sign up. Data collection will continue until at least August 2022, and longer if funding allows. Survey data relating to the dwelling, appliances, household demographics and attitudes were collected at sign up. Data are linked at the household level and UK-based academic researchers can apply for access within a secure virtual environment for research projects in the public interest. This is a data descriptor paper describing how the data were collected, the variables available and the representativeness of the sample compared to national estimates. It is intended to be a guide for researchers working with or considering using the SERL Observatory dataset, or simply looking to learn more about it. [ABSTRACT FROM AUTHOR]

Sustainable methods of practice within the fashion and textile industry (FTI) often strive to employ a circular economy that aims to eliminate waste through the continual use of resources. Complex problems such as waste, consumption, and overproduction are heavily intertwined; the main aim of this paper is to report on research focused on re-examining the potential of food waste streams as a commercially viable and circular source of raw materials for the FTI. Herein, regenerated protein fibres (RPFs) from food production waste streams rich in protein have been chosen as the main topic of focus. RPFs have a rich and relevant history from a local manufacturing perspective during wartime and post-war clothing rationing (1941–1949) in the UK. RPFs were used to meet civilian needs for wool-based textiles as part of a wider series of 'make do and mend' strategies designed to manage the consumption of new textile products. However, RPFs demonstrated inferior quality in terms of durability when compared to wool-based textiles, a significant contributing factor to the consequent commercial phasing out of RPFs. In today's take–make–waste model, the FTI landscape can be defined by speed, from slow (high-quality materials and construction, long-lasting products) to fast (seasonal, disposable, low-quality materials and construction), the latter infamous for dire environmental impacts. A key objective of this research is to review the association of quality and longevity within the context of a local and circular fashion economy in which textile quality and lifecycle analysis are holistically matched to the longevity of the textile, garment, or product to reduce waste across the supply chain. [ABSTRACT FROM AUTHOR]