Search

In the context of the global drive towards sustainability and rapid integration of renewables, electric vehicles, and charging infrastructure, the need arises for advanced operational strategies that support the grid while managing the intermittent nature of these resources. Microgrids emerge as a solution, operating independently or alongside the main grid to facilitate power flow management among interconnected sources and different loads locally. This review paper aims to offer a comprehensive overview of the different control strategies proposed in the literature to control microgrids with electric vehicle charging stations. The surveyed research is primarily categorized according to the employed control algorithms, although distinctions are also made based on defined microgrid architecture, utilization of specific power sources, and charging stations configurations. Additionally, this paper identifies research gaps in the current research. These gaps encompass the use of oversimplified models for charging stations and/or renewable sources operation, limited simulation time periods, or lack of experimental testing of proposed approaches. In the light of these identified shortcomings, this manuscript presents recommendations for guiding future research. [ABSTRACT FROM AUTHOR]

With the rapid development of renewable energy and the increasing maturity of energy storage technology, microgrids are quickly becoming popular worldwide. The stochastic scheduling problem of microgrids can increase operational costs and resource wastage. In order to reduce operational costs and optimize resource utilization efficiency, the real-time scheduling of microgrids becomes particularly important. After collecting extensive data, reinforcement learning (RL) can provide good strategies. However, it cannot make quick and rational decisions in different environments. As a method with generalization ability, meta-learning can compensate for this deficiency. Therefore, this paper introduces a microgrid scheduling strategy based on RL and meta-learning. This method can quickly adapt to different environments with a small amount of training data, enabling rapid energy scheduling policy generation in the early stages of microgrid operation. This paper first establishes a microgrid model, including components such as energy storage, load, and distributed generation (DG). Then, we use a meta-reinforcement learning framework to train the initial scheduling strategy, considering the various operational constraints of the microgrid. The experimental results show that the MAML-based RL strategy has advantages in improving energy utilization and reducing operational costs in the early stages of microgrid operation. This research provides a new intelligent solution for microgrids' efficient, stable, and economical operation in their initial stages. [ABSTRACT FROM AUTHOR]

The integration of the Internet of Things (IoT) with renewable energy technologies is revolutionizing modern power systems by enhancing efficiency, reliability, and sustainability. This paper examines the role of the IoT in optimizing the integration and management of renewable energy sources, such as solar and wind power, into the electrical grid. The IoT enables real-time monitoring, data analysis, and automation, facilitating advanced load management, demand response, and energy storage solutions. Key advancements in IoT technologies, including smart grids and energy management systems, are discussed, highlighting their impact on improving grid stability and promoting the use of renewable energy. The paper also finds some challenges such as data security, privacy, and the need for standardized communication protocols. Furthermore, it finds how the IoT optimizes electric vehicle performance through advanced battery management, real-time energy consumption monitoring, and improved interaction with the electrical grid. Future research directions emphasize the potential of the IoT to further enhance renewable energy integration through artificial intelligence and machine learning, driving the transition towards a more sustainable and resilient energy future. [ABSTRACT FROM AUTHOR]

In recent years, global efforts towards a future with sustainable energy have intensified the development of renewable energy sources (RESs) such as offshore wind, solar photovoltaics (PVs), hydro, and geothermal. Concurrently, green hydrogen, produced via water electrolysis using these RESs, has been recognized as a promising solution to decarbonizing traditionally hard-to-abate sectors. Furthermore, hydrogen storage provides a long-duration energy storage approach to managing the intermittency of RESs, which ensures a reliable and stable electricity supply and supports electric grid operations with ancillary services like frequency and voltage regulation. Despite significant progress, the hydrogen economy remains nascent, with ongoing developments and persistent uncertainties in economic, technological, and regulatory aspects. This paper provides a comprehensive review of the green hydrogen value chain, encompassing production, transportation logistics, storage methodologies, and end-use applications, while identifying key research gaps. Particular emphasis is placed on the integration of green hydrogen into both grid-connected and islanded systems, with a focus on operational strategies to enhance grid resilience and efficiency over both the long and short terms. Moreover, this paper draws on global case studies from pioneering green hydrogen projects to inform strategies that can accelerate the adoption and large-scale deployment of green hydrogen technologies across diverse sectors and geographies. [ABSTRACT FROM AUTHOR]

This document discusses the challenges of achieving high-power quality in modern power grids with a large share of distributed power production, particularly due to the integration of renewable energy sources (RES). The variable nature of RES can lead to disturbances and power quality degradation. The document highlights the importance of voltage source converters and control systems in enabling the flexible operation of RES. It also mentions the concept of microgrids, which are closely connected to power quality and other factors such as the Internet of Things and cyber security. The document includes eight research papers covering various topics related to power quality analysis and control of renewable energy sources in power grids. These topics include power factor correction, supercapacitor parameters identification, pulse width modulation, disturbance analysis, vibration analysis of motors, control of converters, phasor measurement units, and optimization of controller parameters. The document concludes by expressing gratitude to the authors, staff, and reviewers involved in the research papers. [Extracted from the article]

With the increasing use of renewable energy sources and decentralized power systems, certain challenges have emerged in meeting consumers' electrical energy demands. The intermittent nature of renewable energy generation means that it cannot always align with consumers' needs, resulting in periods of excess energy production when it is not required. To bridge this gap between production and consumption, energy storage systems are necessary. This paper defines the work of an isolated microgrid, which consists of renewable sources (wind and PV) for energy production, households with electric vehicles as consumers, and a combined storage system. This storage system is made from batteries, hydrogen storage, and a control system that defines the best use of the storage. Stored energy is utilized through fuel cells to generate electricity for consumption when renewable sources cannot meet the demand. This paper presents the principles of electrolysis and models of individual elements within such a system, as well as the definition and principle of control of the system functionality based on rules and conditions. The proposed control system aims to increase the energy storage lifecycle by deciding when and how to utilize which type of storage and define a self-sufficient microgrid based on renewable sources of production. An economic analysis of the storage part of the system was carried out in which the levelized cost of energy stored and the NPC of the storage systems are calculated. A simulation of the system's operation is conducted using one-hour measurements of wind turbines, solar panels, and household consumption in Serbia. To analyze the system's behavior, a one-week time horizon is considered. [ABSTRACT FROM AUTHOR]

Due to a rising share of renewable energy sources on the production side and electrification of transport and heating on the consumption side, the efficient management of flexibility in distribution networks is crucial for ensuring optimal operation and utilization of resources. Nowadays, the sensitivity-based approach is mainly used in medium-voltage (MV) networks for regulating voltage profiles with reactive power of distributed energy resources (DER). The main disadvantage of the simplified sensitivity-based method is its inaccuracy in case of a high deviation of the network voltage from the nominal values. Furthermore, it was also noted that despite the fact that the method is well described in the literature, there is a lack of systematic approach to its implementation in real-life applications. Thus, the main objective of this paper is to address this disadvantage and to propose an algorithm designed to calculate required consumer flexibility in near real-time to ensure distribution grid operation within operational criteria. In the first part of the paper, network state, including line loading and node voltages, is assessed to determine distribution network node capacity. By analyzing the sensitivity of network busbars to changes in consumption and production, our algorithm effectively identifies the most efficient nodes and facilitates strategic decision-making for resource allocation. We demonstrate the effectiveness of our approach through simulations of real-world distribution network data, highlighting its ability to enhance network flexibility and improve resource utilization. Leveraging sensitivity coefficients, the algorithm enables flexible consumption and production management across various scenarios, supporting the transition to a more dynamic and efficient power system. [ABSTRACT FROM AUTHOR]

A new passivity-based voltage tracker for islanded Direct Current (DC) microgrids is presented in this paper. The proposed design develops a new sufficient condition for passivity-based state feedback with proportional and integral control using the attracting ellipsoid method. In this paper, we consider the time behavior of the extended vector, which completely describes the principle properties of the closed-loop system such as the boundedness of the trajectories within some ellipsoid and the dependence of its "size" on the feedback gains. The next step, which we are realizing in this paper, is the minimization of the attractive ellipsoid by selecting the "best" admissible feedback parameters. Here, it is important to note that the applied feedback is of PD-type (proportional differential) on the system state and I-type (integral) on the output. This is a new construction of the suggested feedback which gives several advantages for a designer. The suggested control is decentralized and uses only the local states; it is cost-effective and avoids the time delays in the communication networks which are needed if centralized control is used. The suggested control is carried out in the bilinear matrix inequality (BMI) framework. Extensive simulation is performed on a test system composed of renewable energy sources, under plug and play (PnP) operations, and uncertainties in distribution lines and loads. The performance of the proposed decentralized voltage controller is compared with that of a voltage tracker present in the literature. The comparison shows the improvements introduced by the proposed control ensure the stability of the dc bus voltage and a quick response under different scenarios of operating conditions. [ABSTRACT FROM AUTHOR]

This paper proposes a novel virtual inertia control strategy for distributed power systems with high penetration of renewable energy sources. The strategy uses a quasi-Z-source power converter to emulate the inertia response of a synchronous generator by regulating the DC-link capacitor voltage in proportion to the grid frequency deviation. This paper analyzes the effect of inertia on the frequency regulation of a single-area power system and derives the parameter design method and limitations of the virtual inertia. The paper also introduces the working principle and modulation technique of the quasi-Z-source power converter and presents the virtual inertia control scheme based on a voltage-frequency controller. The paper verifies the feasibility and effectiveness of the proposed strategy through MATLAB/Simulink simulations and dSPACE semi-physical experiments. The results show that the proposed strategy can reduce the frequency deviation and rate of change of frequency (RoCoF) by 20% and 50%, respectively, under load disturbances. The paper demonstrates that the quasi-Z-source power converter can provide flexible and adjustable virtual inertia for distributed power systems without additional energy storage devices. [ABSTRACT FROM AUTHOR]

Microgrids have emerged as a pivotal solution in the quest for efficient, resilient, and sustainable energy systems. Comprising diverse distributed energy resources, microgrids present a compelling opportunity to revolutionize how we generate, store, and distribute electricity, while simultaneously reducing carbon footprints. This paper proposes an optimal battery energy storage system (BESS) management scheme, along with capacitor placement for reactive power (Q)-compensation, and scheduling for the purpose of a renewable-based microgrid's loss minimization. The proposed model evaluates the impact of BESS management on energy efficiency and analyzes how optimal scheduling of BESS influences system losses. Furthermore, it investigates the coordinated planning and operation of active assets within the microgrid, such as controllable capacitor banks, in enhancing overall efficiency. The model is formulated as a mixed-integer second-order cone programming (MISOCP) problem which is solved for both deterministic and stochastic generation and consumption data. The proposed model is tested on a 21-bus microgrid comprising photovoltaic and hydropower energy resources, and the efficacy of the model is approved by several case studies. The simulation results show that the proposed method can reduce microgrid energy losses by approximately 12 percent using the deterministic approach and around 14 percent with the stochastic approach. [ABSTRACT FROM AUTHOR]

Substantial breakthroughs in renewable energy have been made in order to reduce energy-induced climate change. Yet our reliance on these sources is still insufficient. The UK's objective of attaining net-zero emissions by 2050 is highly dependent on shifting to an electrical system that exclusively relies on zero-carbon generation. This entails integrating renewable energy sources, along with other low-carbon sources such as nuclear power, into the energy mix. However, the primary barrier to incorporating additional renewable energy sources into the grid is their intermittent and volatile nature. Therefore, there is a pressing need to stabilise the generation of renewables and manage this volatility by enhancing the balancing mechanism between microgrids and the national grid. This paper examines previous research on microgrids and smart grids, specifically from a supply chain perspective. It has been observed that the majority of the current literature focuses on documenting selfish microgrids that strive to optimise performance at the microgrid level. However, there is an alternative approach that draws inspiration from the field of supply chain management. Consequently, it is possible to enhance a microgrid's performance within the broader system that it belongs to by reconsidering the timing and location of storage utilisation. [ABSTRACT FROM AUTHOR]

With the explosion in energy consumption demand, the deep penetration of renewable energy into the grid is inevitable and has become trend across the world today. Microgrids with integrated renewable energy are the core components of smart grids and will permeate all areas of human activity. Although this grid has a very flexible working principle, its heavy reliance on renewable energy sources can cause significant disturbances to the electric transmission system. Therefore, the control and monitoring processes for microgrids must be implemented through various mechanisms to ensure the microgrid system operates safely, stably, and effectively. In this paper, the research team will introduce and synthesize the multilevel control scheme of current types of microgrids. We will evaluate the advantages and disadvantages of each type of MG, providing a reference for further research in the field of microgrid control applications, both current and in the near future. [ABSTRACT FROM AUTHOR]

The climate crisis necessitates a global shift to achieve a secure, sustainable, and affordable energy system toward a green energy transition reaching climate neutrality by 2050. Because of this, renewable energy sources have come to the forefront, and the research interest in microgrids that rely on distributed generation and storage systems has exploded. Furthermore, many new markets for energy trading, ancillary services, and frequency reserve markets have provided attractive investment opportunities in exchange for balancing the supply and demand of electricity. Artificial intelligence can be utilized to locally optimize energy consumption, trade energy with the main grid, and participate in these markets. Reinforcement learning (RL) is one of the most promising approaches to achieve this goal because it enables an agent to learn optimal behavior in a microgrid by executing specific actions that maximize the long-term reward signal/function. The study focuses on testing two optimization algorithms: logic-based optimization and reinforcement learning. This paper builds on the existing research framework by combining PPO with machine learning-based load forecasting to produce an optimal solution for an industrial microgrid in Norway under different pricing schemes, including day-ahead pricing and peak pricing. It addresses the peak shaving and price arbitrage challenges by taking the historical data into the algorithm and making the decisions according to the energy consumption pattern, battery characteristics, PV production, and energy price. The RL-based approach is implemented in Python based on real data from the site and in combination with MATLAB-Simulink to validate its results. The application of the RL algorithm achieved an average monthly cost saving of 20% compared with logic-based optimization. These findings contribute to digitalization and decarbonization of energy technology, and support the fundamental goals and policies of the European Green Deal. [ABSTRACT FROM AUTHOR]

As renewable energy becomes more widespread, the uncertainty of its output poses serious challenges for peak and frequency regulation of the power system. Evaluating a grid's capacity to integrate renewable energy sources can provide an early-warning and decision-making basis for grid operation and scheduling. This paper presents a method for evaluating the hosting capacity of renewable energy, considering frequency security constraints. Introducing the system frequency nadir constraint into a system ensures that the frequency does not drop to a dangerous level in the event of power disturbances. The analytical characterization relation equation for the system frequency nadir constraint is constructed based on polynomial chaos expansion (PCE) theory. Furthermore, with the goal of minimizing the reduction in renewable energy, considering multiple flexible resources, like demand response (DR), Combined Heat and Power (CHP), energy storage, and Power-to-Gas (P2G), a renewable energy hosting capacity evaluation model that considers frequency security and flexibility resources is established. Finally, based on the concept of the feasible region, the maximum hosting capacity of a system's renewable energy is visualized using the progressive vertex enumeration method. It identifies the safe operating region for renewable energy output that meets the safety constraints of power grid operations. The simulation results were validated using a modified IEEE 39 bus system. [ABSTRACT FROM AUTHOR]

The demand for a reliable, cheap and environmentally friendly source of energy makes the integration of renewable energy into power networks a global challenge. Furthermore, reliability, as one of the core elements of efficient and cost-effective energy management options, is still among the dominant factors/techniques that receive more attention for realistic penetrations of renewable energy into the electricity grid. This paper proposes an efficient way of energy management for a grid-connected microgrid. The grid-connected microgrid used in the analysis consists of solar photovoltaic (P.V.) and battery. In this microgrid configuration, oftentimes, the output power might not be equal to the system demand; in this regard, it is expected that the mismatch between these output powers is not zero. However, to reduce the mismatch between demand and supply to be close to zero, this paper proposes strategies of increasing the rated power of solar, battery and grid separately and combining them with a view of finding the cheapest option among these strategies. The results have shown that the cost increment for different options is USD 280.792, 84.48 and 48.204 for storage, P.V. and grid, respectively. These have shown that the storage option is the most expansive option for improving P.V. grid-connected microgrids. This is followed immediately by the P.V. option, which is weather dependent. On the other hand, the grid option is the cheapest option for system reliability improvement. This paper is expected to be useful to both new researchers and experts who are working in energy management with an emphasis on the reliability aspect. [ABSTRACT FROM AUTHOR]

Implementing smart microgrids for Non-Interconnected Zones (NIZs) has become an alternative solution to provide electrical energy by taking advantage of the resources available through the generation of renewable energy within these isolated areas. Within this context, in this study, the challenges related to microgrids and data analysis are presented, and different relevant data architectures described in the literature are compared. This paper focuses on the design of a data architecture for a smart microgrid for NIZs whose microgrid contains two 260 W solar panels, a 480 W inverter, and two 260 Ah batteries. Regarding the Colombian context, this paper describes the limitations (connectivity, isolation, appropriation of technologies) and opportunities (low demand, access to natural resources, state interest) from which the functional and non-functional requirements for the architecture are established. Finally, a data architecture is proposed and implemented in a NIZ in Colombia, and this paper also includes a description of the architecture, its characteristics, its associated opportunities and challenges, and discussions regarding its implementation. [ABSTRACT FROM AUTHOR]

This paper presents the results of the design process focused on the development of the energy subsystem (ES) of a wave energy converter (WEC). The ES is an important electrical part that significantly affects the energy reliability and energy efficiency of the entire WEC device. The designed ES was intended for compact WECs powering IoT network devices working in the distributed grid. The developed ES is an electronic circuit consisting of three cooperating subsystems used for energy conversion, energy storage, and energy management. The energy conversion subsystem was implemented as a set of single-phase bridge rectifiers. The energy storage subsystem was a battery-less implementation based on the capacitors. The energy management subsystem was implemented as a supervisory circuit and boost converter assembly. The designed ES was verified using the physical experiment method. The model experiment reflected the operation of the designed ES with a piezoelectric PZT-based WEC. The experimental results showed a 41.5% surplus of the energy supplied by ES over the energy demanded by the considered load at a duty cycle of ca. 6 min—37.2 mJ over 26.3 mJ, respectively. The obtained results have been evaluated and discussed. The results confirmed the designed ES as a convenient solution, which makes a significant contribution to the compact WECs that can be applied among others to a distributed grid of autonomous IoT network devices powered by free and renewable energy of sea waves. Finally, it will also enable sustainable development of mobile and wireless communication in those maritime areas where other forms of renewable energy may not be available. [ABSTRACT FROM AUTHOR]

In power systems with high penetration of renewable energy, traditional physical model-based optimal dispatch methods suffer from modeling difficulties and poor adaptability, while data-driven dispatch methods, represented by reinforcement learning, have the advantage of fast decision making and reflecting long-term benefits. However, the performances of data-driven methods are much limited by the problem of distribution shift under insufficient power system scenario samples in the training. To address this issue, this paper proposes an improved scenario division method by integrating the power system's key physical features and the data-driven variational autoencoder (VAE)-generated features. Next, based on the scenario division results, a multi-scenario data-driven dispatch model is established. The effectiveness of the proposed method is verified by a simulation conducted on a real power system model in a province of China. [ABSTRACT FROM AUTHOR]

Optimal planning and design of microgrids are priorities in the electrification of off-grid areas. Indeed, in one of the Sustainable Development Goals (SDG 7), the UN recommends universal access to electricity for all at the lowest cost. Several optimization methods with different strategies have been proposed in the literature as ways to achieve this goal. This paper proposes a microgrid installation and planning model based on a combination of several techniques. The programming language Python 3.10 was used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. Four levels of study were carried out. The first level consisted of simulating the model obtained with a cluster, which is considered based on the elbow and k-means clustering method as a case study. The second level involved sizing the microgrid with a capacity of 40 kW and optimizing all the resources available on site. The example of the different resources in the Togo case was considered. At the third level, the work consisted of proposing an optimal connection model for the microgrid based on voltage stability constraints and considering, above all, the capacity limit of the source substation. Finally, the fourth level involved a planning study of electrification strategies based mainly on microgrids according to the study scenario. The results of the first level of study enabled us to obtain an optimal location for the centroid of the cluster under consideration, according to the different load positions of this cluster. Then, the results of the second level of study were used to highlight the optimal resources obtained and proposed by the optimization model formulated based on the various technology costs, such as investment, maintenance, and operating costs, which were based on the technical limits of the various technologies. In these results, solar systems account for 80% of the maximum load considered, compared to 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed based on the constraints of a voltage stability limit estimated to be 10% of the maximum voltage drop. The results obtained for the third level of study enabled us to present selective results for load nodes in relation to the source station node. Finally, the last results made it possible to plan electrification using different network technologies and systems in the short and long term. The case study of Togo was taken into account. The various results obtained from the different techniques provide the necessary leads for a feasibility study for optimal electrification of off-grid areas using microgrid systems. [ABSTRACT FROM AUTHOR]

Over the past few decades, many universities have turned to using microgrid systems because of their dependability, security, flexibility, and less reliance on the primary grid. Microgrids on campuses face challenges in the instability of power production due to meteorological conditions, as the output of renewable sources such as solar and wind power relies entirely on the weather and determining the optimal size of microgrids. Therefore, this paper comprehensively reviews the university campuses' microgrids. Some renewable energy sources, such as geothermal (GE), wind turbine (WT), and photovoltaic (PV), are compared in terms of installation costs, availability, weather conditions, efficiency, environmental impact, and maintenance. Furthermore, a description of microgrid systems and their components, including distributed generation (DG), energy storage system (ESS), and microgrid load, is presented. As a result, the most common optimization models for analyzing the performance of campus microgrids are discussed. Hybrid microgrid system configurations are introduced and compared to find the optimal configuration in terms of energy production and flexibility. Therefore, configuration A (Hybrid PV- grid-connected) is the most common configuration compared to the others due to its simplicity and free-charge operation. [ABSTRACT FROM AUTHOR]

Grid-forming inverters (GFMs) have emerged as crucial components in modern power systems, facilitating the integration of renewable energy sources and enhancing grid stability. The significance of GFMs lies in their ability to autonomously establish grid voltage and frequency, enabling grids to form and improve system flexibility. Discussing control methods for grid-forming inverters is paramount due to their crucial role in shaping grid dynamics and ensuring reliable power delivery. This paper explores the fundamental and advanced control methods employed by GFMs, explaining their operational principles and performance characteristics. Basic control methods typically involve droop control, voltage and frequency regulation, and power-balancing techniques to maintain grid stability under varying operating conditions. Advanced control strategies encompass predictive control, model predictive control (MPC), and adaptive control, which influence advanced algorithms and real-time data for enhanced system responsiveness and efficiency. A detailed analysis and performance comparison of different control methods for GFM is presented, highlighting their strengths, limitations, and suitability for diverse grid environments. Through comprehensive studies, this research interprets the ability of various control strategies to mitigate grid disturbances, optimize power flow, and enhance overall system stability. [ABSTRACT FROM AUTHOR]

In recent years, the development of hydrogen energy has been widely discussed, particularly in combination with renewable energy sources, enabling the production of "green" hydrogen. With the significant increase in wind power generation, a promising solution for obtaining green hydrogen is the development of wind-to-hydrogen (W2H) systems. However, the high proportion of wind power and electrolyzers in a large-scale W2H system will bring about the problem of renewable energy consumption and frequency stability reduction. This paper analyzes the operational characteristics and economic feasibility of mainstream electrolyzers, leading to the proposal of a coordinated hydrogen production scheme involving both a proton exchange membrane (PEM) electrolyzer and an alkaline (ALK) electrolyzer. Subsequently, a coordinated control based on Model Predictive Control (MPC) is proposed for system frequency regulation in a large-scale W2H islanded microgrid. Finally, simulation results demonstrate that the system under PEM/ALK electrolyzers coordinated control not only flexibly accommodates fluctuating wind power but also maintains frequency stability in the face of large disturbances. Compared with the traditional system with all ALK electrolyzers, the frequency deviation of this system is reduced by 25%, the regulation time is shortened by 80%, and the demand for an energy storage system (ESS) is reduced. The result validates the effectiveness of MPC and the benefits of the PEM/ALK electrolyzers coordinated hydrogen production scheme. [ABSTRACT FROM AUTHOR]

As offline control photovoltaic (PV) plants are not equipped with online communication and remote control systems, they cannot adjust their power in real-time. Therefore, in a distribution network saturated with offline control PVs, the distribution system operator (DSO) should schedule the distributed energy resources (DERs) considering the uncertainty of renewable energy to prevent curtailment due to overvoltage. This paper presents a day-ahead network operation strategy using a mobile energy storage system (MESS) and offline control PVs to minimize power curtailment. The MESS model efficiently considers the transportation time and power loss of the MESS, and models various operating modes, such as the charging, discharging, idle, and moving modes. The optimization problem is formulated based on mixed-integer linear programming (MILP) considering the spatial and temporal operation constraints of MESSs and is performed using chanced constrained optimal power flow (CC-OPF). The upper limits for offline control PVs are set based on the probabilistic approach, thus mitigating overvoltage due to forecasting errors. The proposed operation strategy was tested in the IEEE 33-node distribution system coupled with a 15-node transportation system. The test results show the effectiveness of the proposed method for minimizing curtailment in offline control PVs. [ABSTRACT FROM AUTHOR]

With large-scale grid-connected renewable energy, new power systems require more flexible and reliable energy storage power sources. Pumped storage stations play an important role in peak shaving, valley filling, and promoting renewable energy consumption. This paper presents the reasonable energy-abandonment operation of a combined power generation system (CPGS), in which a pumped storage station is the core control power, with an ultra-high proportion of renewable energy. Firstly, based on the seasonal characteristics of wind, solar, and load demand, typical days are selected through improved clustering analysis algorithms. Then, a daily optimal scheduling model for combined power generation systems (CPGS) is developed with the goals of economy, low-carbon, and stable operation. Finally, the correlation between the energy-abandonment rate and pumped storage station peak shaving and system optimization operation indicators is obtained by a reasonable energy-abandonment calculation method considering source-grid-load coordination. Taking the operation data of an energy base in the western region of China as an example, when the penetration rate of renewable energy is 60–70% in the future, the operating cost on the power side is greatly affected by the construction of the source side. When the system operates at a planned reasonable energy-abandonment rate of 2%, electricity regulation, load tracking, and daily operating costs all show better performance. [ABSTRACT FROM AUTHOR]

In the modern power grid, characterized by the increased penetration of power electronics and extensive utilization of renewable energy, inverter-based power plants play a pivotal role as the principal interface of renewable energy sources (RESs) and the grid. Considering the stability characteristics of grid-following (GFL) inverters when the grid is relatively weak, the application of grid-forming (GFM) controls becomes imperative in enhancing the stability of the entire power plant. Thus, there is an urgent need for suitable and effective models to study the interaction and stability of the paralleled inverters employing GFL and GFM controls. Thus, the small-signal modeling with full-order state-space model and eigenvalues analysis are presented in this paper. First, the small-signal state-space model of the individual GFL and GFM inverters is obtained, considering the control loop, interaction, reference frame, transmissions, and time delays. Then, the models of the individual inverter are extended to the hybrid inverters to study the effects of the GFM inverters on the small-signal stability of the entire system. And the impacts of the inertia and damping are analyzed by the eigenvalues of the state-transition matrix. A case comprising three parallel GFL inverters and two GFL inverters with one GFM inverter, respectively, are studied to examine the effectiveness and accuracy of the model. Finally, the stability margin obtained from the eigenvalue analysis of the entire system is verified by time-domain simulations. [ABSTRACT FROM AUTHOR]

Microgrid technology offers a new practical approach to harnessing the benefits of distributed energy resources in grid-connected and island environments. There are several significant advantages associated with this technology, including cost-effectiveness, reliability, safety, and improved energy efficiency. However, the adoption of renewable energy generation and electric vehicles in modern microgrids has led to issues related to stability, energy management, and protection. This paper aims to discuss and analyze the latest techniques developed to address these issues, with an emphasis on microgrid stability and energy management schemes based on both traditional and distinct approaches. A comprehensive analysis of various schemes, potential issues, and challenges is conducted, along with an identification of research gaps and suggestions for future microgrid development. This paper provides an overview of the current state of the field and proposes potential areas of future research. [ABSTRACT FROM AUTHOR]

Microgrids are considered a viable solution for achieving net-zero targets and increasing renewable energy integration. However, there is a lack of conceptual work focusing on practical data analytics deployment schemes and case-specific insights. This paper presents a scalable and flexible physical and digital architecture for extracting data-driven insights from microgrids, with a real-world microgrid utilized as a test-bed. The proposed architecture includes edge monitoring and intelligence, data-processing mechanisms, and edge–cloud communication. Cloud-hosted data analytics have been developed in AWS, considering market arrangements between the microgrid and the utility. The analysis involves time-series data processing, followed by the exploration of statistical relationships utilizing cloud-hosted tools. Insights from one year of operation highlight the potential for significant operational cost reduction through the real-time optimization and control of microgrid assets. By addressing the real-world applicability, end-to-end architectures, and extraction of case-specific insights, this work contributes to advancing microgrid design, operation, and adoption. [ABSTRACT FROM AUTHOR]

Currently, the global energy revolution in the direction of green and low-carbon technologies is flourishing. The large-scale integration of renewable energy into the grid has led to significant fluctuations in the net load of the power system. To meet the energy balance requirements of the power system, the pressure on conventional power generation units to adjust and regulate has increased. The efficient utilization of the regulation capability of controllable industrial loads and energy storage can achieve the similarity between renewable energy curves and load curves, thereby reducing the peak-to-valley difference and volatility of the net load. This approach also decreases the adjustment pressure on conventional generating units. Therefore, this paper proposes a two-stage optimization scheduling strategy considering the similarity between renewable energy and load, including energy storage and industrial load participation. The combination of the Euclidean distance, which measures the similarity between the magnitude of renewable energy–load curves, and the load tracking coefficient, which measures the similarity in curve shape, is used to measure the similarity between renewable energy and load profiles. This measurement method is introduced into the source-load-storage optimal scheduling to establish a two-stage optimization model. In the first stage, the model is set up to maximize the similarity between renewable energy and the load profile and minimize the cost of energy storage and industrial load regulation to obtain the desired load curve and new energy output curve. In the second stage, the model is set up to minimize the overall operation cost by considering the costs associated with abandoning the new energy sources and shedding loads to optimize the output of conventional generator sets. Through a case analysis, it is verified that the proposed scheduling strategy can achieve the tracking of the load curve to the new energy curve, reducing the peak-to-valley difference of the net load curve by 48.52% and the fluctuation by 67.54% compared to the original curve. These improvements effectively enhance the net load curve and reduce the difficulty in regulating conventional power generation units. Furthermore, the strategy achieves the full discard of renewable energy and reduces the system operating costs by 4.19%, effectively promoting the discard of renewable energy and reducing the system operating costs. [ABSTRACT FROM AUTHOR]

In recent years, there has been increasing interest in integrating the smart grid concept into railway networks, which has been driven by the need to enhance energy efficiency and reduce air pollution in such energy-intensive systems. Consequently, experts have actively sought innovative solutions with which to tackle these challenges. One promising strategy involves integrating renewable energy sources (RESs), energy storage systems (ESSs), and electric vehicle charging stations (EVCSs) into current electric railway systems (ERSs). This study begins by examining the concept of implementing smart grids in railway systems through bibliometric analysis. It then delves into the realization of a hybrid railway microgrid (H-RMG) designed to enhance power flow capacities, improve energy efficiency, and address power quality issues in traditional AC railway networks. This paper introduces various future AC–DC-coupled hybrid railway microgrid (ADH-RMG) architectures centered around a shared DC bus acting as a DC hub for upgrading conventional AC railway systems utilizing interfacing static converters. Through an exploration of different possible ADH-RMG configurations, this research aims to offer valuable insights and a roadmap for the modernization and reconstruction of existing railway networks using smart grid technologies. The integration of RESs and EV charging infrastructures within the ADH-RMG concept presents a promising pathway toward establishing more sustainable and environmentally friendly railway systems. [ABSTRACT FROM AUTHOR]

This paper designs a multi-variable hybrid islanding-detection method (HIDM) using signal-processing techniques. The signals of current captured on a test system where the renewable energy (RE) penetration level is between 50% and 100% are processed by the application of the Stockwell transform (ST) to compute the Stockwell islanding-detection factor (SIDF) and the co-variance islanding-detection factor (CIDF). The signals of current are processed by the application of the Hilbert transform (HT), and the Hilbert islanding-detection factor (HIDF) is computed. The signals of current are also processed by the application of the Alienation Coefficient (ALC), and the Alienation Islanding Detection Factor (AIDF) is computed. A hybrid islanding-detection indicator (HIDI) is derived by multiplying the SIDF, CIDF, AIDF, and an islanding weight factor (IWF) element by element. Two thresholds, designated as the hybrid islanding-detection indicator threshold (HIDIT) and the hybrid islanding-detection indicator fault threshold (HIDIFT), are selected to detect events of islanding and also to discriminate such events from fault events and operational events. The HIDM is effectively tested using an IEEE-13 bus power network, where solar generation plants (SGPs) and wind generation plants (WGPs) are integrated. The HIDM effectively identified and discriminated against events such as islanding, faults, and operational. The HIDM is also effective at identifying islanding events on a real-time distribution feeder. The HIDM is also effective at detecting islanding events in the scenario of a 20 dB signal-to-noise ratio (SNR). It is established that the HIDM has a small non-detection zone (NDZ). The effectiveness of the HIDM is better relative to the islanding-detection method (IDM) supported by the discrete wavelet transform (DWT), an IDM using a hybridization of the slantlet transform, and the Ridgelet probabilistic neural network (RPNN). An IDM using wavelet transform multi-resolution (WT-MRA)-based image data and an IDM based on the use of a deep neural network (DNN) were used. The study was performed using the MATLAB software (2017a) and validated in real-time using the data collected from a practical distribution power system network. [ABSTRACT FROM AUTHOR]

Demand response (DR) can improve the accommodation of renewable energy and further affect the distributed generation (DG) allocation strategy. In this context, this paper proposes a stochastic optimal allocation model of DG, considering DR. Firstly, to address the uncertainty of wind and solar power outputs, a large number of scenarios of wind and solar power are generated based on the scenario method, which are then clustered into 10 typical scenarios by the k-means method. Secondly, with the goal of maximizing the total cost, the DR cost and corresponding constraints are introduced. Then, the stochastic planning model for DG is established, where the planning level aims to minimize the investment cost while the operation level minimizes the total operation expectation cost. For the non-linear term in the DR cost and power flow constraint, the Taylor expansion method and second-order conic relaxation method are both adopted to transform the original mixed-integer non-linear model to the mixed-integer second-order conic planning model. Finally, the whole planning model for DG is solved by CPLEX 12.6.0. The results show that DR can reduce the total cost and improve the accommodation of renewable energy in the DG planning process, which should be paid more attention to in the DG planning model. [ABSTRACT FROM AUTHOR]

In this paper, an event-triggered distributed secondary control, along with an energy management algorithm, was developed to ensure the voltage stability and power management of a DC microgrid containing batteries and renewable energy sources, such as PV systems and wind turbines. The energy management algorithm, employing fuzzy logic control, governs power flow based on the generation status of sources and the charging rate of the battery. Consequently, the control algorithm shields the battery from overcharging and over-discharging situations, simultaneously ensuring energy quality within the microgrid. Sampled-data-based event-triggered control is integrated into the proposed distributed secondary control to alleviate communication burdens between controllers, effectively avoiding Zeno behavior. To demonstrate the efficacy of the proposed control algorithm, several experimental studies were conducted on a real DC microgrid prototype. The results obtained confirmed the controller's effectiveness. With the proposed control algorithm, autonomous control has been developed to ensure the safe and continuous operation of loads in island-mode microgrids, incorporating PV systems, wind turbines, and batteries, while also minimizing communication overhead. This control system adeptly manages power flow, safeguards the battery against overcharging and over-discharging, and optimizes the efficiency of intermittent energy sources. [ABSTRACT FROM AUTHOR]

The integration of renewable energy sources is crucial for achieving sustainability and environmental preservation. However, their intermittent nature poses challenges to electrical system stability, requiring robust integration strategies. Microgrids emerge as a flexible solution, but their successful deployment requires meticulous planning and intelligent operation to overcome these challenges. This paper presents the development of a reduced-scale laboratory dedicated to researching both hardware and software solutions for intelligent microgrid management. The laboratory was designed to incorporate key components that are becoming increasingly important in the present microgrid context, including renewable energy generation, storage systems, electrolyzers for hydrogen production, and combined heat and power sources. While some equipment consists of commercial models, the battery bank, converter, and supervisory systems were custom-designed to meet the specific requirements of the laboratory. The laboratory has proven itself as a robust tool for conducting studies on microgrids, effectively incorporating essential components, addressing pertinent system issues, and allowing for several tests on converting control algorithms. [ABSTRACT FROM AUTHOR]

Users ought to decide how to operate and manage power systems in order to achieve various goals. As a result, many strategies have been developed to aid in this regard. Optimal power flow management is one such strategy that assists users in properly operating and managing the supply and demand of power in an optimal way under specified constraints. However, in-depth research on optimal power flow management is yet to be explored when it comes to the supply and demand of power for the bulk of standalone renewable energy systems such as solar photovoltaics, especially when it comes to specific applications such as powering military soldier-level portable electronic devices. This paper presents an optimal power flow management modelling and optimisation approach for solar-powered soldier-level portable electronic devices. The OPTI toolbox in MATLAB is used to solve the formulated nonlinear optimal power flow management problem using SCIP as the solver. A globally optimal solution was arrived at in a case study in which the objective function was to minimise the difference between the power supplied to the portable electronic device electronics and the respective portable electronic device power demands. This ensured that the demand for solar-powered soldier-level portable electronic devices is met at all times in spite of the prohibitive case scenarios' circumstances under the given constraints. This resolute approach underscores the importance placed on satisfying the demand needs of the specific devices while navigating and addressing the limitations posed by the existing conditions or constraints. Soldiers and the solar photovoltaic user fraternity at large will benefit from this work as they will be guided on how to optimally manage their power systems' supply and demand scenarios. The model developed herein is applicable to any demand profile and any number of portable electronic device and is adaptable to any geographical location receiving any amount of solar radiation. [ABSTRACT FROM AUTHOR]

To ensure reliable power delivery to customers under potential disturbances, the coordination of a microgrid cluster (MGC) is essential. Various control strategies—centralized, decentralized, distributed, and hierarchical—have been explored in the literature to achieve this goal. The hierarchical control method, with three distinct levels, has proven effective in fostering coordination among microgrids (MGs) within the cluster. The third control level, utilizing a time-triggering consensus protocol, relies on a continuous and reliable communication network for data exchange among MGs, leading to resource-intensive operations and potential data congestion. Moreover, uncertainties introduced by renewable energy sources (RESs) can adversely impact cluster performance. In response to these challenges, this paper introduces a new distributed event-triggered consensus algorithm (DETC) to enhance the efficiency in handling the aforementioned issues. The proposed algorithm significantly reduces communication burdens, addressing resource usage concerns. The performance of this approach is evaluated through simulations of a cluster comprising four DC MGs, in each of which were PV and a hybrid Battery-Super capacitor in the MATLAB environment. The key findings indicate that the proposed DETC algorithm achieves commendable results in terms of voltage regulation, precise power sharing among sources, and a reduction in triggering instants. Based on these results, this method can be deemed as a good development in MGC management, providing a more efficient and reliable means of coordination, particularly in scenarios with dynamic loads and renewable energy integration. It is also a viable option for current microgrid systems, due to its ability to decrease communication loads while retaining excellent performance. [ABSTRACT FROM AUTHOR]

Optimal power flow (OPF) analysis enables the in-depth study and examination of islanded microgrid design and operation. The development of the analysis framework, including modeling, formulating, and selecting effective OPF solvers, however, is a nontrivial task. As a result, this paper presents a tutorial on an OPF modeling framework, offering a mathematical model that can be readily implemented using established open-source software tools such as OpenDSS, Pyomo, and IPOPT. The framework is versatile, capable of representing single-phase and unbalanced three-phase islanded microgrids. Various inverter models, such as those of grid forming and following equipped with their operating characteristics, can be incorporated. The efficacy of the proposed framework is demonstrated in studying the OPF of single-phase and three-phase microgrids. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive review of the future digitalization of microgrids to meet the increasing energy demand. It begins with an overview of the background of microgrids, including their components and configurations, control and management strategies, and optimization techniques. It then discusses the key digital technologies that can be used to improve the performance of microgrids, including distributed energy resources management systems, the Internet of Things, big data analytics, blockchain technology, artificial intelligence, digital twin technology, cloud computing, and augmented reality. The paper also highlights the importance of cybersecurity in microgrids, identifying the potential security vulnerabilities and threats to microgrid cybersecurity, as well as strategies for addressing these challenges. Finally, the paper discusses the barriers and challenges regarding the digitalization of microgrids, including technical complexity, high implementation costs, regulatory barriers, data privacy and security concerns, lack of standardization, interoperability issues, limited technical expertise, and integration with the main grid. Overall, this paper demonstrates the significant potential for digital technologies to transform the future of microgrids. By leveraging advanced technologies and implementing effective cybersecurity measures, microgrids can become more efficient, reliable, and resilient, enabling them to meet the growing demand for energy and contribute to a sustainable energy future. [ABSTRACT FROM AUTHOR]

Energy is very important in daily life. The smart power system provides an energy management system using various techniques. Among other load types, campus microgrids are very important, and they consume large amounts of energy. Energy management systems in campus prosumer microgrids have been addressed in different works. A comprehensive study of previous works has not reviewed the architecture, tools, and energy storage systems of campus microgrids. In this paper, a survey of campus prosumer microgrids is presented considering their energy management schemes, optimization techniques, architectures, storage types, and design tools. The survey is comprised of one decade of past works for a true analysis. In the optimization techniques, deterministic and metaheuristic methods are reviewed considering their pros and cons. Smart grids are being installed in different campuses all over the world, and these are considered the best alternatives to conventional power systems. However, efficient energy management techniques and tools are required to make these grids more economical and stable. [ABSTRACT FROM AUTHOR]

South African universities boast a remarkable solar photovoltaic (PV) resource as a primary renewable energy component. Due to high peak demand tariffs and inherent prominent heating and cooling loads, fast and granular demand response programs are well established within typical campus grids, with electrical networks adapted towards hosting centralized PV plants and emergency diesel generation. With unreliable utility supply and aging infrastructure comes a natural landscape and niche application for campus microgrids (MG) in South Africa. One such case, the University of the Free State's QwaQwa satellite campus in the Phuthaditjhaba district, is no exception to this, as it has sufficient solar PV generation, but it also has an unreliable utility component. This paper investigates a possible MG for the UFS QwaQwa campus with an emphasis on Hybrid PV-Diesel dispatch strategies, specifically, to ensure uptime during the loss of grid supply and decrease fuel usage. The proposed centralized diesel-PV MG system achieves a diesel cost reduction of 21.55%, based on simulated results using actual campus load data from 2019. The approach improves electricity availability, supplying 100% of all campus demand, compared to 70% under a de-centralized approach. [ABSTRACT FROM AUTHOR]

A novel control strategy to manage the integration of a wind turbine (WT) and an energy storage unit to an existing stand-alone microgrid servicing an oil and gas (O&G) rig is the topic of this paper. The control strategy includes a primary and a secondary controller that, using the battery in tandem with the WT, does not require any dump load (A). The secondary controller includes an energy management system (EMS) which uses the estimated wind production and other specific local information to size the battery to avoid the curtailment of the WT (B) and simultaneously provide the framework for the economic analysis (C). Points A, B and C are the main novelties introduced with this work. Additionally, a primary controller operates the original microgrid source, a gas turbine (GT), at its maximum efficiency through an active power control strategy to lower fuel consumption, by prioritizing the exploitation of the renewable energy source through the combination EMS and battery sizing. The microgrid is simulated and the combined controller of the battery and GT bench-tested. [ABSTRACT FROM AUTHOR]

Distributed power generation plays a critical role in the stability and reliability of modern power systems. Due to the rapid growth of renewable energy generation, the requirements of the transmission and distribution system operators are becoming more stringent. Among these requirements, one of the most important is the Low-Voltage Ride-Through (LVRT) capability, which demands that the inverters remain connected to the grid and provide support during voltage sags. For this purpose, flexible current control algorithms stand out because they can manage unbalanced voltages and simultaneously achieve other control objectives. With the aim of presenting a concrete document focused on describing fundamental principles and discussing common design guidelines, this paper presents an overview of flexible current control strategies applied to LVRT capability. The operation features and design aspects of experiences reported in the literature are reviewed. Moreover, the paper proposes a general methodology to design LVRT flexible current control algorithms. Finally, current and future trends are discussed. [ABSTRACT FROM AUTHOR]

Several issues of individual microgrids (MGs) such as voltage and frequency fluctuations mainly due to the intermittent nature of renewable energy sources' (RESs) power production can be mitigated by interconnecting multiple MGs and forming a multi-microgrid (MMG) system. MMG systems improve the reliability and resiliency of power systems, increase RESs' utilization, and provide cost-efficient power to the consumers. This paper provides a comprehensive review of the conducted studies in the MMG area summarizing different operational goals and constraints proposed in the literature for efficient operation of MMGs. Besides, different MMG architectures in which the MGs can be interconnected to form an MMG system and their characteristics are discussed. This paper also provides a state-of-the-art review on different control strategies and operation management methodologies for the operation and control of MMGs in centralized, decentralized, distributed, and hierarchical structures. A classification of different sources of uncertainties in an MMG system and proposed uncertainty handling strategies are also presented. Finally, the paper is complemented with a discussion of the main open issues and future research directions of MMG systems. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive overview of the microgrid (MG) concept, including its definitions, challenges, advantages, components, structures, communication systems, and control methods, focusing on low-bandwidth (LB), wireless (WL), and wired control approaches. Generally, an MG is a small-scale power grid comprising local/common loads, energy storage devices, and distributed energy resources (DERs), operating in both islanded and grid-tied modes. MGs are instrumental to current and future electricity network development, such as a smart grid, as they can offer numerous benefits, such as enhanced network stability and reliability, increased efficiency, an increased integration of clean and renewable energies into the system, enhanced power quality, and so forth, to the increasingly growing and complicated power systems. By considering several objectives in both islanded and grid-tied modes, the development of efficient control systems for different kinds of MGs has been investigated in recent years. Among these control methods, LB communication (LBcom)-based control methods have attracted much attention due to their low expenses, recent developments, and high stability. This paper aims to shed some light on different aspects, a literature review, and research gaps of MGs, especially in the field of their control layers, concentrating on LBcom-based control methods. [ABSTRACT FROM AUTHOR]

Optimization systems (OSs) allow operators of electrical power systems (PS) to optimally operate PSs and to also create optimal PS development plans. The inclusion of OSs in the PS is a big trend nowadays, and the demand for PS optimization tools and PS-OSs experts is growing. The aim of this review is to define the current dynamics and trends in PS optimization research and to present several papers that clearly and comprehensively describe PS OSs with characteristics corresponding to the identified current main trends in this research area. The current dynamics and trends of the research area were defined on the basis of the results of an analysis of the database of 255 PS-OS-presenting papers published from December 2015 to July 2019. Eleven main characteristics of the current PS OSs were identified. The results of the statistical analyses give four characteristics of PS OSs which are currently the most frequently presented in research papers: OSs for minimizing the price of electricity/OSs reducing PS operation costs, OSs for optimizing the operation of renewable energy sources, OSs for regulating the power consumption during the optimization process, and OSs for regulating the energy storage systems operation during the optimization process. Finally, individual identified characteristics of the current PS OSs are briefly described. In the analysis, all PS OSs presented in the observed time period were analyzed regardless of the part of the PS for which the operation was optimized by the PS OS, the voltage level of the optimized PS part, or the optimization goal of the PS OS. [ABSTRACT FROM AUTHOR]

The urgent demand for clean and renewable energy sources has led to the emergence of the microgrid (MG) concept. MGs are small grids connecting various micro-sources, such as diesel, photovoltaic wind, and fuel cells. They operate flexibly, connected to the grid, standalone, and in clusters. In AC MG control, a hierarchical system consists of three levels: primary, secondary, and tertiary. It monitors and ensures MG stability, power quality, and power sharing based on the specifications of governing protocols. Various challenging transient disturbances exist, such as generator tripping, secondary control failure due to communication delay, and drastic load changes. Although several optimal power sharing methods have been invented, they pose complex control requirements and provide limited improvement. Therefore, in this paper, a novel optimized droop control is proposed using a metaheuristic multi-objective evolutionary algorithm called the Centripetal Force-Gravity Search Algorithm (CF-GSA) to improve the droop performance of power sharing, voltage and frequency stability, and power quality. CF-GSA is an improved algorithm designed to address the issue of local solutions commonly encountered in optimization algorithms. The effectiveness and superiority of the proposed method are validated through a series of simulations. The results of these simulations show that the proposed multi-objective optimization droop control method works well to fix problems caused by power sharing errors in isolated AC microgrids that have to deal with high inductive loads and changes in line impedance. [ABSTRACT FROM AUTHOR]

Growth in renewable energy systems, direct current (DC) microgrids, and the adoption of electric vehicles (EVs) will substantially increase the demand for bi-directional converters. Precise control mechanisms are essential to ensure optimal performance and better efficiency of these converters. This paper proposes a deep neural network (DNN)-based controller designed to precisely control bi-directional converters for vehicle-to-vehicle (V2V) and vehicle-to-grid (V2G) applications. This control technique allows the converter to quickly attain new reference values, enhancing performance and efficiency by significantly reducing the overshoot duration. To train the DNN controller, large synthetic data are used by performing simulations for various sets of conditions, and the results are validated with a hardware setup. The real-time performance of the DNN controller is compared with a conventional proportional–integral (PI)-based controller through simulated results using MATLAB Simulink (version 2023a) and with a real-time setup. The converter attains a new reference of about 975 μ s with the proposed control technique. In contrast, the PI controller takes about 220 ms, which shows that the proposed control technique is far better than the PI controller. [ABSTRACT FROM AUTHOR]

This paper focuses on a water pumping system fed by a hybrid (PV–Wind) generator. The water pumping system uses centrifugal pumps driven by variable speed Induction Motors (IM) controlled by a Field Oriented Control (FOC). The absence of battery storage to decouple sources and power demand is the main originality of the contribution, together with the typical adaptation of the FOC strategy. Furthermore, the absence of battery storage will consequently lead to fixing the system operating point at a steady state which is imposed both by the intermittent renewable energy sources and by the hydraulic load characteristics. The basic idea is then to adapt the system impedance by using the two degrees of freedom offered by the power source inverter in order to control, firstly, the DC bus voltage and, secondly, the rotor flux of the induction machine; the adaptation of the FOC strategy is based on this idea. Simulation results clearly confirmed by experimental investigations show the satisfying performance of the system even with variable powers of the intermittent renewable source. [ABSTRACT FROM AUTHOR]

The paper deals with an optimization problem in an electricity distribution network with different types of distributed generation and a battery storage system in terms of a smart grid concept. The optimization problem considers two objectives, namely, the annual energy losses and the exchange of energy with the higher-level power grid. The decision variables of the problem are the allocation of the different distributed generation units and the battery storage system, the annual power profiles of the controllable distributed generation and the battery storage system, and the power factor profiles of the controllable and noncontrollable distributed generation. All decision variables are solved simultaneously in a single optimization problem. The variable load shapes of the grid consumers and the profiles of the photovoltaic and wind power systems are considered in the study. All data are observed at the annual level with hourly resolution. The problem solving method uses computational intelligence techniques, namely, metaheuristic optimization methods and artificial neural networks. The study proposes a framework for optimizing the decision variables in the planning phase of distributed generation and battery storage, and for controlling the variable power and power factor profiles based on an artificial neural network in the implementation phase. The optimization problem is solved with a power system simulation program and a metaheuristic optimizer in cosimulation synergy. The three cases of distributed generation and battery storage are considered simultaneously. The proposed method is applied to the test grid operator IEEE with 37 buses, and reductions in annual energy losses and energy exchange are obtained in the ranges 34–86% and 41–99%, respectively. [ABSTRACT FROM AUTHOR]

The energy transition hinges on the effective integration of renewable energy sources into the power grid. Islands can provide invaluable insights into the challenges and opportunities of integrating variable renewable energy into the grid due to their relatively small power systems, isolated grids, and diverse availability of renewable energy resources. This paper presents a study on the system benefits and challenges of marine energy integration in insular power systems, focusing on the Orkney Islands as a case study. A microgrid modeling approach that optimizes the mix of renewable sources and energy storage systems for future scenarios considering strategic time horizons (2030, 2040, and 2050) was employed. Results suggest that integrating ocean energies, namely, wave and tidal energy, yields notable benefits compared to traditional renewable energy sources exclusively. These benefits encompass reduced installed capacity, minimized energy storage requirements, lower excess generation, and overall cost-saving. [ABSTRACT FROM AUTHOR]

This paper addresses a crucial omission in the traditional approach to solving the classic economic dispatch problem within microgrids featuring renewable energy sources—the often-neglected frequency disturbances arising from reductions in system inertia. To remedy this, we present an innovative economic dispatch model empowered by nonlinear optimization (NLP), incorporating stringent minimum inertia constraints essential for ensuring system stability over a 24-h horizon. Our approach involves a comprehensive exploration of the intricate relationship between system inertia and frequency stability, culminating in the seamless integration of these inertia constraints into the economic dispatch model. To validate the practicality of our model, we present two distinct scenarios: a base case representing conventional dispatch methodologies and an alternative case that considers the imposition of inertia restrictions. These scenarios are rigorously tested and implemented using the CICGRE TF C6.04 test system. Employing the powerful GAMS platform alongside the NPL model, we successfully solved the dispatch problem. Our results underscore the significance of maintaining system inertia within the 1.54-s threshold proposed by our model, showcasing a tangible reduction in generation costs as a direct outcome of this enhanced approach to economic dispatch. This research advances the understanding of microgrid management and offers a practical solution to enhance system stability and economic efficiency in renewable-energy-powered microgrids. [ABSTRACT FROM AUTHOR]