Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The building sector contributes to 40% of the total final energy consumption and 36% of CO2 emissions in Europe, and these are set to increase in the coming years. International directives are pushing towards a decarbonisation roadmap to improve the quality of cities and the health of citizens. Buildings have a potentially central role in terms of energy transition as a means to produce and save energy. Photovoltaic shading devices (PVSDs) protect buildings from direct solar radiation and overheating while producing renewable electricity onsite and increasing the users' thermal comfort. Even though the potential of the PVSD is considerable, the sector is still unexplored, and few studies on the topic are available in the literature. This systematic review aims to present an exhaustive overview of the current literature on state-of-the-art PVSDs by analysing the scientific framework in terms of the status of the research. It presents a performance-based approach focusing on innovative products, PVSD design strategies, and energetic performance in distinct climate conditions and configurations. In particular, 75 articles and about 250 keywords were identified, selected, and analysed. The literature review serves as a basis for further R&D activities led by both the industrial and the academic sectors. [ABSTRACT FROM AUTHOR]

This paper presents the Positive Energy District Database (PED DB), a pivotal web tool developed collaboratively by the COST Action 'PED-EU-NET', in alignment with international initiatives such as JPI Urban Europe and IEA EBC Annex 83. The PED DB represents a crucial step towards sharing knowledge, promoting collaboration, reinforcing decision-making, and advancing the understanding of Positive Energy Districts (PEDs) in the pursuit of sustainable urban environments. The PED DB aims to comprehensively map and disseminate information on PEDs across Europe, serving as a dynamic resource for sustainable urban development according to the objective of making the EU climate-neutral by 2050. Indeed, PEDs imply an integrated approach for designing urban areas—the districts—where a cluster of interconnected buildings and energy communities produce net zero greenhouse gas emissions, managing an annual local/regional overflow production of renewable energy. The paper describes the collaborative step-by-step process leading to the PED DB implementation, the current results and potentials of the online platform, and introduces its future developments towards a more user-friendly and stakeholders-tailored tool. The interactive web map offers a customizable visualizations and filters on multiple information related to PED case studies, PED-relevant cases, and PED Labs. Users can access detailed information through a table view, facilitating comparisons across different PED projects and their implementation phase. The paper offers insights and detailed analysis from the initial dataset that includes 23 PED cases and 7 PED-related projects from 13 European countries, highlighting the key characteristics of surveyed PEDs. [ABSTRACT FROM AUTHOR]

This paper describes a new underwater pumped storage hydropower concept (U.PSH) that can store electric energy by using the high water pressure on the seabed or in deep lakes to accomplish the energy transition from fossil to renewable sources. Conventional PSH basically consists of two storage reservoirs (upper and lower lake) at different topographical heights. It needs special topographic conditions, which are only limitedly available in mountain regions. Furthermore, due to the lack of acceptance and the environmental impact, new conventional PSH projects are very unlikely to be built in larger numbers in Europe in the near future. The presented solution solves these issues by placing the storage system on the seabed, thus having other geographical requirements. It operates as follows: in contrast to well-known conventional PSH plants, which use two separated water reservoirs of different heights, the U.PSH concept uses the static pressure of the water column in deep waters by installing a hollow concrete sphere in deep water. Storage of electricity is achieved by using a reversible pump in the hollow sphere. Upon opening a valve, water flows into the sphere, driving a turbine/generator, thereby discharging the storage device. In order to re-charge, the water is pumped out of the sphere against the pressure of the surrounding water. The power and energy, respectively, are proportional to the surrounding water pressure at the seabed. The amount of energy stored depends on the water depth and the volume of the spheres. The spheres need a cable connection to the shore or to a close-by floating transformer station (e.g., an offshore wind plant). No other connections such as pipes are needed. The functional principle of this energy storage technology, its state of the art, its storage capacity and the shape and size of the required spheres are discussed in this paper. [ABSTRACT FROM AUTHOR]

The use of economic instruments within environmental policy has become a challenging topic for policymakers, governments and scholars. Environmental taxes have emerged as a prevailing preference in developed countries to promote sustainability. Recently, a particular focus has been given to waste generation and disposal, shifting the attention from greenhouse gases to another important source of environmental pollution. This paper investigates the effect of national environmental taxes and policies on industrial waste. A fixed effects model is used for 34 countries across Europe from 2004 to 2022. The results suggest that environmental taxes and energy policies reduce industrial (hazardous and non-hazardous) waste. However, environmental tax reforms should take into consideration the deterioration in environmental quality, the increase in economic costs and undesirable social consequences. [ABSTRACT FROM AUTHOR]

The increase in global average temperature, mainly due to the high rate of greenhouse gas emissions, has triggered severe global warming and climate change. In Europe, the building sector accounts for a significant portion of emissions and energy consumption, prompting attention on nearly-zero-energy buildings (nZEBs) and zero-carbon buildings, as they play a pivotal role in reaching the goal of climate neutrality by 2050. Passive systems offer a promising solution, optimizing energy usage by better adapting buildings to their local climates. This paper reviews the state-of-the-art of passive heating and cooling techniques, exploring their contributions to contemporary architecture and showcasing their features and adaptability across different climates. Furthermore, the link between traditional and bioclimatic architecture is assessed. Recent years have witnessed a surge in publications on bioclimatic solar passive strategies, reflecting an intensified debate on climate change. Europe leads research in this area, aligned with initiatives like the Green Deal and Fit for 55. While dynamic simulation software is widely utilized for energy efficiency analysis, there remains limited integration of Building Information Modeling (BIM) and life cycle analysis (LCA) tools, which could enhance holistic assessments. [ABSTRACT FROM AUTHOR]

Global energy consumption is growing rapidly, with the frequency and intensity of extreme events constantly increasing, posing a long-term threat to power supply and consumption. Therefore, analyzing the spatiotemporal characteristics of electricity consumption and quantitatively assessing the impact of extreme events on electricity consumption are of great significance. Based on fine-grained electricity consumption data from Europe for the years 2019–2022, this paper employs a data mining perspective and four methods including Z-score, Isolation Forest, Local Outlier Factor, and Autoencoder to detect abnormal electricity consumption during extreme events. Additionally, it combines indicators such as elastic loss, vulnerability, and duration to measure the impact of extreme events on electricity consumption. It is found that low temperatures could lead to abrupt changes in electricity consumption, with Northern Europe being more significantly affected by low temperatures. The COVID-19 pandemic had the most significant impact on electricity consumption in Europe, with the middle part of Europe being the hardest hit during the first wave of the pandemic. Electricity anomalies during the pandemic period were related to national pandemic control policies and exhibited some lag. High temperatures persisted for a longer duration in the middle part of Europe. [ABSTRACT FROM AUTHOR]

This paper explores business models for community energy storage (CES) and examines their potential and feasibility at the local level. By leveraging Multi Criteria Decision Making (MCDM) approaches and real-world case studies in Europe and India, it presents insights into CES deployment opportunities, challenges, and best practices. Different business models, including community energy cooperatives, utility–community partnerships, demand response, energy services, and market mechanisms, are analyzed. The proposed method combines the MCDM method PROMETHEE II with the fuzzy set theory to obtain a complete CES business model ranking, addressing project uncertainties. The analysis emphasizes CES's role in balancing local renewable energy supply and demand, facilitating energy sharing, and achieving energy independence. Findings prioritize models like Community Cooperative, Energy Arbitrage, and Energy Arbitrage Peak Shaving for CES with renewables. Environmental benefits include reduced diesel use and greenhouse gas emissions. Efficient cooperatives are advocated to recover costs and enable competitive energy prices. The paper highlights the need for novel value propositions to boost the energy transition in local communities. This research contributes to the discourse on CES business models, fostering knowledge exchange and promoting effective strategies for sustainable energy systems. [ABSTRACT FROM AUTHOR]

This paper focuses on the possible roles of aggregators in the European electricity markets and the challenges and opportunities they face in participating in different market segments. Demand response (DR) is becoming increasingly important with the growth of renewable energy, and aggregators can play a critical role in balancing supply and demand in real time. This paper provides an overview of prices in electricity markets in which DR aggregators can participate and provides recommendations for aggregators regarding which markets to focus on. However, the regulatory framework for aggregators is still evolving in Europe, creating challenges for them to navigate different market designs, regulatory frameworks, and pricing mechanisms. Through a combination of literature review and data analysis, this paper aims to provide insights for aggregators on how to maximize profits and minimize risks in the European electricity market. The article achieves this by conducting an extensive analysis of various markets, comparing their essential attributes relevant to the functioning of aggregators. [ABSTRACT FROM AUTHOR]

Instrument transformers are largely used to measure voltages and currents in public electricity networks. Their performance is essential for Power Quality measurements. Tests and procedures to estimate the effect of single influence factors are performed according to current standards. However, the instrument transformers are exposed simultaneously to more than one factor. The standardized procedures for their characterization with combined influence factors are under construction in Europe. The work in this paper is focused on the development of a new set-up for the determination of the accuracy and frequency response of medium-voltage transformers within the combined influence factors of temperatures and vibrations. The test set-up includes a platform for the combination of temperature and vibrations, a generating system for harmonics up to 9 kHz superposed with 35 kV, 50 Hz voltage and a reference measuring system. The results of several tests carried out on a 35 kV/100 V/50 Hz voltage transformer in the presence of these influence factors are discussed in this paper. They show that the accuracy and frequency response of the voltage transformers are more influenced by temperature than by vibrations. [ABSTRACT FROM AUTHOR]

Reducing emissions from fluorinated gases (F-gases) is considered one of the key conditions for the European Union (EU) to be able to meet the requirements of the European Green Deal, primary objectives of which are the reduction in greenhouse gas emissions by at least 55% by 2030 compared to 1990 and the gradual transition to net climate neutrality by 2050. To this end, a quota system for hydrofluorocarbons (HFCs) is already in place, introduced through the updated F-Gas Regulation (517/2014). The aim of this paper is to review an innovative scheme currently under development that strongly promotes the Recovery, Recycling and Reuse (3R) of F-gases extracted from the heating, ventilation, air conditioning and refrigeration (HVAC-R) equipment of the building sector, thus offering a sustainable alternative source for refrigerant supplies. Therefore, the basic operating principles of the so-called "3R ECOSYSTEM" are outlined and especially its three main components, which are: the self-certification/self-declaration platform, the F-gas identification and recycling units (prototypes) and the Retradeables marketplace. In addition, an overview of both the demonstration phase and the scheduled replication phase of the 3R ECOSYSTEM is provided, including the estimated impact on carbon dioxide (CO2) savings due to the progressive uptake of the circular use of existing F-gases across Europe. [ABSTRACT FROM AUTHOR]

In this paper, a simple model is proposed for predicting the thermal energy requirements of greenhouses in Europe. The model estimates the annual heating requirements and the maximum required heating power, along with the corresponding heating and zero-energy operating periods. It is based on the greenhouse technical data (the overall heat loss coefficient, cover transmission, sensible absorbance), the cultivation conditions (temperature range), and the meteorological data (solar radiation and ambient temperature) according to the site characteristics (longitude and latitude). The model results can be obtained using a hand calculator. The model results are compared with those of a detailed model simulating a greenhouse's thermal performance and they agreed with real data from the literature. Moreover, a model sensitivity analysis revealed the effect of various factors on the greenhouse's energy requirements. The results proved that the most significant factor affecting heating requirements, the maximum heating power, and heating periods is the latitude of the greenhouse site, whereas zero-energy periods are primarily influenced by the plant cultivation temperature range and then by the latitude. According to our findings, in lower latitudes (40 to 50 degrees), heating requirements range from 250 to 430 kWh/m2/y, whereas, in higher latitudes (50 to 60 degrees), heating needs range from 430 to 650 kWh/m2/y. [ABSTRACT FROM AUTHOR]

To meet the 2050 EU decarbonization goals, there is a need for new and innovative ideas to increase energy efficiency, which includes reducing the energy consumption of buildings and increasing the use of on-site renewable energy sources. One possible solution for achieving efficient thermal energy transition in the building sector is to assign new functionalities to the building envelope. The building envelope can function as a thermal energy storage system, which can help compensate for irregularities in solar energy availability. This can be accomplished by utilizing phase change materials as the energy storage medium in the building envelope. In this paper, two phase change materials with different melting temperatures of 21 °C and 28 °C are compared for their application in a dynamic solar building envelope. Both experimental and numerical studies were conducted within the scope of this study. The laboratory testing involved simulating the conditions of the four seasons through steady-state and dynamic experiments. The performance of the phase change materials was evaluated using a small-scale PASLINK test stand that imitates indoor and outdoor conditions. A numerical model of a small-scale building envelope was created using data from laboratory tests. The purpose of this model was to investigate how the tested phase change materials perform under different climate conditions. The experimental findings show that RT21HC is better at storing thermal energy in the PCM and releasing it into the indoor area than RT28HC. On the other hand, the numerical simulation results demonstrate that RT28HC has an advantage in terms of thermal storage capacity in climates found in Southern Europe, as it prevents overheating of the room. [ABSTRACT FROM AUTHOR]

Due to high electricity prices and possible shortages of gas and other energy commodities, various fluctuations in electricity generation will need to be regulated. Given the increasing expansion of wind power plants in Europe and worldwide. It is necessary and essential to put power regulation into practice, as mandated by regulation 2016/631 EU. A significant power balance problem may arise on the grid, which may lead to cyclical and recurring blackouts in the future. The motivation for this paper is to raise awareness of the controllability of wind turbines and to highlight the gentle pace of research in this area for pitch angle control. Therefore, the chief idea of the paper is to develop a proposal for wind power plant power control by changing the rotor blade rotation, following previous research in this area, and determining the shortcomings and possibilities. The paper provides a numerical method for controlling the power output of a wind power plant, for which an algorithm has been proposed. This control is intended to provide a framework for the design and implementation of a wind power plant control program. Coordination between the multiple sources will fulfil a leading role in smooth power management. [ABSTRACT FROM AUTHOR]

Urban waste heat recovery, in which low temperature heat from urban sources is recovered for use in a district heat network, has a great deal of potential in helping to achieve 2050 climate goals. For example, heat from data centres, metro systems, public sector buildings and waste water treatment plants could be used to supply 10% of Europe's heat demand. Despite this, at present, urban waste heat recovery is not widespread and is an immature technology. Based on interviews with urban waste heat stakeholders, investors interested in green investments, and experience from demonstrator projects, a number of recommendations are made. It is suggested that policy raising awareness of waste heat recovery, encouraging investment and creating a legal framework should be implemented. It is also recommended that pilot projects should be promoted to help demonstrate technical and economic feasibility. A pilot credit facility is suggested aimed at bridging the gap between potential investors and heat recovery projects. [ABSTRACT FROM AUTHOR]

Over the last two decades, the tidal energy industry has laid the groundwork for creating commercially viable tidal power generation projects to strengthen sustainable energy policies around the world. At the end of 2021, the cumulative installation of tidal stream technology that has been deployed in Europe reached 30.2 MW, where the majority of the installations are by small and medium-sized companies. Due to a growing demand among investors related to the global tidal energy industry, the reliability and safety of operational-stage tidal energy systems' components are becoming increasingly important. In this context, companies, universities and research institutes are focusing on conducting large- and small-scale tests of tidal turbine elements to validate their projected design life, and major attention is being given to assessing the structural integrity of turbine blades. This review paper focuses on structural tests that have been reported for axial flow tidal turbine blades manufactured using composite materials around the world, highlighting the testing standards, equipment and instrumentation required. Overall, this review article discusses the state of the art in the structural testing of tidal turbine blades. In addition, it highlights the global concerns and research gaps to ensure the long-term sustainability of axial flow tidal turbine blades. In addition, the information contained in this article will be useful for formulating a smooth and reliable mechanism to enhance the evaluation process of the structural properties of tidal turbine blades in the future. [ABSTRACT FROM AUTHOR]

Internal Combustion Engines (ICE) are experiencing a transition era in which research and innovation are mainly pushed by environmental issues: emission reduction and fuel saving are indispensable requirements of the new technologies, otherwise the end of ICE is proposed in Europe. Modifications, in reality, are under discussion by 2026 but the environmental issues are anyway welcomed. In the transportation sector, today dominated by ICEs, it appears that the reduction in the propulsion power, hybridization at various degrees, and exhaust post-treatment improvements will guarantee technological solutions able to support the transition in the next couple of decades toward full electric propulsion. Waste Heat Recovery (WHR) is a very interesting opportunity since almost two-thirds of fuel energy is not converted into mechanically useful energy. Moreover, the integration with other thermal streams on board (cooling and lubricating mediums, EGR cooling) can add further value to the recovery opportunity as well as the concept of managing the engine thermal management which can produce a sensible contribution that is appreciated mainly during urban driving. A huge scientific effort is underway, and a great expectation is perceptible. More generally, the technological options that can achieve a reduction in overall fuel consumption and, thus, the improvement of global engine efficiency, are the most valuable when they can be introduced without massive changes to the engine layout. This happens in all the energy applications in which ICEs are involved since the recovery unit can be introduced in the exhaust line. The mechanical energy recovered can be easily transformed into electrical energy, so represents an interesting integration with the hybrid propulsion powertrains. In this paper, a review of the most important technologies referred to the WHR is presented, outlining advantages and drawbacks, and setting up the presently available technologies referred to the transportation sector. [ABSTRACT FROM AUTHOR]

Renewable energy sources (RESs) and electricity demand are not evenly distributed geographically across Europe. Thus, harvesting the wind energy from the north and solar energy from the south and delivering them to the demand in central Europe is a more viable solution. However, the present High-voltage alternating current (HVAC) transmission grids have been sometimes congested; thus, High-voltage direct current (HVDC) provides another possibility along the existing HVAC infrastructure. In this paper, we propose a hybrid HVAC-HVDC grid, allowing a large penetration of concentrated RES in Europe and North Africa. More specifically, the HVDC network is constructed to transfer wind and hydro electricity from northwestern Europe and solar electricity from north Africa, while the HVAC network is used to distribute electricity within each country or among adjacent areas. To quantitatively evaluate the feasibility and relevant performances, multiple dimensions of indicators are designed. Employing several European energy scenarios up to 2050, the performances of the proposed HVAC-HVDC infrastructure are analyzed and compared. The calculation results show that compared with the pure HVAC grid, the integrated HVAC-HVDC grid can significantly reduce greenhouse gas emissions and pollutants, leading to a further reduction in the number of deaths from air pollution. In addition, the HVAC-HVDC grids can accommodate a higher penetration of RES without causing infeasible power flows. [ABSTRACT FROM AUTHOR]

2020 was a key year for several targets in European energy and climate policy, including the requirement for European countries to deploy smart metering for at least 80% of electricity consumers. This target was set to ease the transition towards a consumer-centered and digitalized energy system. In fact, there are numerous applications that are facilitated or are directly linked to smart meters. Among others: demand response programs that enable consumers to be active in the energy market, and remote grid monitoring by the Distribution System Operator. In this paper, we analyze the initial provisions of the Third Energy Package and those of the Clean Energy Package, with particular focus on the recently approved directive on common rules for the internal market for electricity and the newly introduced smart meters specifications. We present the highlights of the national cost–benefit analyses for smart metering roll-out, focusing on the decisions made by the Member States with respect to a potential smart meter roll-out, that was targeted to be completed by 2020 and present the current situation of smart metering roll-out. We also present and categorize some of the R&I smart grid projects realized over recent years, focusing on the ones that deal with smart metering integration in order to depict the smart metering applications and technologies tested on the ground. Therefore, this paper portrays a full picture with respect to smart meters in Europe today and gives insights for monitoring smart metering roll-outs taking into account the current trends in smart metering applications. [ABSTRACT FROM AUTHOR]

This editorial paper tackles the issue of the consumer attitudes toward energy reduction and changing energy consumption behaviors. This topic is of special relevance today as Europe faces an unprecedented energy crisis as a result of diverting from Russian supplies of oil and gas due to the war in Ukraine. For many years now, Europe has relied upon cheap and affordable Russian oil and gas (in fact, the European Green Deal and the strategy for the decarbonization of the economy by 2030 were indirectly based on it), but the transition to the renewable future now appears to be jeopardized. As energy prices are soaring globally, it is not yet clear whether this would have an effect on significantly changing consumer behavior and increasing energy efficiency and security as many consumers are reluctant to change their old habits and are used to having their energy on demand and for any possible occasion. However, changing energy consumption behaviors would be beneficial not only for handling the current energy crisis but also for setting the long-term trends with respect to energy saving, which is crucial for fighting global warming and climate change while sustaining economic growth. [ABSTRACT FROM AUTHOR]

This paper presents a comparative analysis of various capacity mechanisms that are either in force or under approval in key countries/regions in Europe and the US. A detailed analysis on the necessities that led to the establishment of the capacity mechanisms, along with various fundamental technical and operational features associated with the design and operation of different capacity mechanisms, mainly in Europe (Italy, France, Germany, Belgium, Poland, Great Britain, Ireland, Cyprus) and complementarily in the US (PJM, New England), are presented. This analysis is complemented by a real-life application regarding the long-term capacity remuneration mechanism that is expected to be established in Greece in the near future. A detailed simulation of the envisaged capacity mechanism auctions under differentiated scenarios has been performed, regarding the future Greek power system operating conditions during the forthcoming decade (2022–2031). Test results illustrate that the outcome of the auctions is heavily dependent on the future energy generation mix and the market participants' bidding strategy. Whereas, the total cost that will have to be undertaken by the electricity supply companies and, ultimately, by the end-consumers for the financing of the proposed capacity mechanism lies in the range of 5.5–8.7 €/MWh for the entire study period. [ABSTRACT FROM AUTHOR]

Every type of agricultural production is a burden for the natural environment. The paper's objective is to assess the energy use efficiency, GHG emissions, and provide an economic analysis of buckwheat production for Central Europe (Poland). The analysis and comparison involved two production systems: low-input and high-input ones. The experiment involved three varieties of buckwheat, Panda, Volma, and Mancan. The yields for analysis were obtained from the field experiment which was set up in 3k-p fractional design was applied in two replications in which at the same time five factors were tested (A—variety, B—mineral fertilisation, C—sowing rate, D—weed control, E—growth regulator). A quartile was used as a statistical tool to select production systems. A high-input buckwheat production regime required, on average, 74.00% more energy than a low-input system. The total mean energy input for three varieties ranged from 7532.7 to 13,106.9 MJ ha−1 for low- and high-input systems, respectively. The results show that the energy use efficiency, specific energy, and net energy gain for the low-input system were on average 1.51, 9.6 MJ kg−1, and 3878.8 MJ ha−1, respectively, for the investigated varieties. For the high-input system, it was 1.35, 10.9 MJ kg−1, 4529.9 MJ ha−1, respectively. The total CO2 equivalent emissions during buckwheat production were higher for the high-input system than for the low-input system by more than 40%. The economic analysis demonstrated that the high-input system had better economic efficiency (without EU payment), 1.01 on average, than the low-input system, 1.07 on average. The international literature does not offer research on energy analysis for the production of common buckwheat and GHG emissions. The findings of this study demonstrate how the production systems affect energy and economic efficiency as well as GHG emissions. The authors suggest further research in Europe and globally, particularly on the energy use efficiency and GHG emissions in the production of common buckwheat, to verify the present results and improve production technologies (reduce inputs and costs). [ABSTRACT FROM AUTHOR]

One quarter of global energy consumption goes towards meeting transport needs. In Europe, the share of energy for transport is much higher and accounts for about a third. Therefore, it is very important to monitor the sustainable development and progress of the sector. This paper seeks to develop a framework for the sustainability assessment of road transport in EU countries and to evaluate the countries' achievements in the last decade. The research adheres to the provision that the developed framework should be easily applied in future studies. Therefore, significant attention is paid to the selection of indicators and their availability, as well as the selection of the research instrument itself. The multi-criteria decision-making (MCDM) technique TOPSIS has been applied for calculations and countries' ranking, in order to compare countries' achievements in the last decade (2010–2020). The last ten years' analysis allows us to identify the direction of individual countries in developing road transport. [ABSTRACT FROM AUTHOR]

To meet the target of reducing greenhouse gas emissions, hydrogen as a carbon-free fuel is expected to play a major role in future energy supplies. A challenge with hydrogen is its low density and volumetric energy value, meaning that large tanks are needed to store and transport it. By injecting hydrogen into the natural gas network, the transportation issue could be solved if the hydrogen–natural gas mixture satisfies the grid gas quality requirements set by legislation and standards. The end consumers usually have stricter limitations on the gas quality than the grid, where Euromot, the European association of internal combustion engine manufacturers, has specific requirements on the parameters: the methane number and Wobbe index. This paper analyses how much hydrogen can be added into the natural gas grid to fulfil Euromot's requirements. An average gas composition was calculated based on the most common ones in Europe in 2021, and the results show that 13.4% hydrogen can be mixed with a gas consisting of 95.1% methane, 3.2% ethane, 0.7% propane, 0.3% butane, 0.3% carbon dioxide, and 0.5% nitrogen. The suggested gas composition indicates for engine manufacturers how much hydrogen can be added into the gas to be suitable for their engines. [ABSTRACT FROM AUTHOR]

Nowadays, there is an urgent necessity for breakthrough technologies able to reduce process complexity and to lower costs to make the biomass-based biodiesel supply chain competitive. This paper presents an innovative methodology for the identification of secondary biomass potentials for biofuel production. The methodology, divided into four steps, defines the criteria that allow identification of promising scenarios of biomass supply chains for commercial application of innovative technologies. The model set up a scoring procedure based on carbon emission avoidance, efficient resource exploitation and sustainability indexes. Applying the four levels of analysis (biomass availability, suitability analysis, regionalization and multi-criteria analysis), the cereal straw supply chains in four European districts (Scandinavian, Hanseatic, Central European and Mediterranean) have been identified and grouped in 18 biomass supply regional clusters (BSRCs). The clusters represent the most promising hotspots where biomass availability, logistics and feedstock requirements for a novel conversion technology meet. Central European and Mediterranean districts are those with the highest cereal straw bioeconomic potentials which allow mono-feedstock supply chains and relatively high capacity of a conversion technology at 200 MWth and beyond. Central Europe has an overall bioeconomic potential of 16.249 kt (232.359 TJ) distributed over 36 regions and organized in 12 BSRCs. The Mediterranean district has an overall bioeconomic potential of 3541 kt (50.630 TJ) distributed over nine regions and organized in four BSRCs. [ABSTRACT FROM AUTHOR]

An underappreciated source of renewable energy is wastewater, both municipal and industrial, with global production exceeding 900 km3 a year. Wastewater is currently perceived as a waste that needs to be treated via energy-consuming processes. However, in the current environmental nexus, traditional wastewater treatment uses 1700–5100 TWh of energy on a global scale. The application of modern and innovative treatment techniques, such as microbial fuel cells (MFC), would allow the conversion of wastewater's chemical energy into electricity without external energy input. It has been demonstrated that the chemically bound energy in globally produced wastewater exceeds 2.5 × 104 TWh, which is sufficient to meet Europe's annual energy demand. The aim of this paper is to answer the following questions. How much energy is bound in municipal and industrial wastewaters? How much of that energy can be extracted? What benefits will result from alternative techniques of waste treatment? The main finding of this report is that currently achieved energy recovery efficiencies with the use of microbial fuel cells technology can save about 20% of the chemical energy bound in wastewater, which is 5000 TWh on a global scale. The recovery of energy from wastewater via MFC technology can reach as much as 15% of global energy demands. [ABSTRACT FROM AUTHOR]

Decarbonizing heating in buildings is a key part of climate change mitigation policies, but deep retrofit is progressing slowly, e.g., at a pace of 0.2%/y of the building stock in Europe. By means of tests in two flats of a multiapartment housing complex recently renovated to very low values of energy needs, this paper explores the role of deep retrofitted buildings in providing energy flexibility services for the occupants/owners/managers and for the energy system. Key to this flexibility increase and capacity savings is the large reduction of energy needs for heating via a high level of external insulation, which allows the thermal capacity of the building mass to act as an energy storage, without the large energy losses presently affecting a large part of the building stock. Due to the limited number of case studies reporting experimental applications in real buildings, this research aims to offer an analysis based on a series of tests and detailed monitoring which show a significant increase in the time interval during which the low-energy-needs building remains in the comfort range, compared to a high-energy-needs building, when active delivery of energy is deactivated during the heating season. Intermittent renewable energy might hence be stored when available, thus enhancing the ability of the energy system to manage inherent variability of some renewable energy sources and/or increasing the share of the self-consumption of locally generated RES energy. Besides, two unplanned heating power outages which have involved the entire building complex allowed us to verify that deep retrofitted buildings are able to maintain thermally safe indoor conditions under extreme events, such as a power outage, for at least 5 days. [ABSTRACT FROM AUTHOR]

Over 30% of the world's land area is covered by forests. Approximately 761 million m3 of wood is harvested annually in Europe (2017). The aim of the paper is to assess the amount of wood (biomass) produced in Europe per year, as it determines the amount of carbon dioxide released from wood because of combustion for heating and energy purposes. The circular bioeconomy was applied as the theoretical framework for this study. The study employs official statistics on material flows and also uses a technology assessment, which allows for more precise estimations. It can be estimated that 110 million tons of harvested woody biomass are converted into energy every year. This constitutes nearly 69% of processed wood, with burned wood treated as zero-emission. From the analysis of the compiled results, it can be concluded that, in Europe, more than 50% of the mass of raw wood material harvested per year is used for energy in the first stage of processing by manufacturing industries. These processes produce products that become the raw material for further processing, as a result of which, further amounts of wood biomass are used for energy purposes. [ABSTRACT FROM AUTHOR]

This paper analyzes the potential for deep renovation of an apartment building to the level of a passive house in different contexts in the continental part of Europe. The examined variables include different local climatic conditions, levels of economic development, and levels of market development (energy prices, energy footprint, labor prices, etc.) as well as different energy efficiency retrofit scenarios in four different countries. The adequate methodology was developed here in order to obtain an optimal solution for deep renovation in each context. The proposed methodology was based on the interaction of energy simulation and mathematical optimization. In this model, the energy performances of a building are determined with the EnergyPlus package and the optimal solution was obtained by using a mixed-integer non-linear programming model. The results demonstrate that the optimal solution for each analyzed location cannot provide cost-effectiveness over the lifetime of a building, so the introduction of additional subsidies or incentives, such as carbon taxes and upfront subsidies, is necessary. [ABSTRACT FROM AUTHOR]

This paper presents a pre-normative roadmap that foresees the developments in the charging of heavy-duty electric vehicles (HD-EVs). It supports and facilitates the future standardization efforts of charging technologies by creating an overview of the popularity of charging technologies and the end users' needs. The required input for the work was collected using a comprehensive investigation on the available charging technologies and their standardization, reviewing the existing roadmaps and research work, and conducting surveys and interviews of end users and technical stakeholders. According to the findings, a pantograph on the roof of a vehicle and plug-based charging are currently the most used charging interfaces. This trend is likely to continue in the future, since (1) pantographs on vehicle roofs, (2) pantographs on infrastructure, and (3) plugs were graded as charging interfaces with the highest potential by the participants of the technical survey. Static and conductive charging technologies show more potential than dynamic and wireless charging technologies. Nevertheless, inductive charging may be a future charging solution for HD-EVs if the current bottlenecks in the technology can be addressed. These bottlenecks include high prices, slightly lower efficiency, lack of standardization, the maximum achievable power, and safety concerns. Furthermore, interoperability was repeatedly mentioned as the main challenge for today's charging technologies. [ABSTRACT FROM AUTHOR]

This paper analyses decarbonisation scenarios for the European passenger car fleet in 2050. The scenarios have been developed using the backcasting approach and aim to reduce greenhouse gas (GHG) emissions of passenger cars to a level defined in the Transport White paper that is 60% below 1990 levels. Considering the emission levels of 2010, a yearly reduction of 1.7% is required in order to achieve the target. Car emissions were decomposed into the main emission factors of mobility, efficiency and carbon intensity. How these factors change over time depends on various external factors: the pace of technological improvements, the future role of cars in society’s mobility system and the priority given to decarbonising energy demand. The analysis showed that if car mobility and ownership continue to increase as expected in a ‘business as usual’ case, a share of 97% plug-in hybrid or battery electric vehicles might be required by 2050, together with a substantial decrease in greenhouse gas emission from electricity production. A transition to more advanced car technology such as automated driving, advanced batteries or lightweight materials in vehicle production would raise vehicle efficiency. Should car mobility continue at a high level, an early technology transition will be required. [ABSTRACT FROM AUTHOR]

Future power production in Europe is expected to include large shares of variable wind and solar power production. Norway, with approximately half of the hydropower reservoir capacity in Europe, can contribute to balance the variability. The aim of this paper is to assess how such a role may impact the Norwegian hydropower system in terms of production pattern of the plants, changes in reservoir level and water values. The study uses a stochastic optimization and simulation model and analyses an eHighway2050 scenario combined with increases in the hydropower production capacities in Norway. The capacity increases from ca. 31 GW in the present system to 42 and 50 GW respectively. The study uses 75 years with stochastic wind, solar radiation, temperature and inflow data. The results show that the hydropower system is able to partly balance the variable production and significantly reduce the power prices for the analyzed case. The paper shows that some of the power plants utilize their increased capacity, while other plants do not due to hydrological constraints and model limitations. The paper discusses how the modelling can be further improved in order to quantify more of the potential impacts on the future power system. [ABSTRACT FROM AUTHOR]

Accounting for nearly 40% of final energy consumption, buildings are central to European energy policy. The Directive on Energy Performance of Buildings establishes a benchmarking system known as cost-optimality to set minimum energy performance requirements in new and existing buildings. This paper applies the cost-optimal methodology to an existing structure located in the Mediterranean area (Southern Italy). The building is composed of two units that have been considered for different uses: hotel and multi-residential. Several energy efficiency and renewable measures have been implemented both individually and as part of packages of measures. The cost-optimal solution has been identified as able to optimize energy consumption and costs from financial and macroeconomic perspectives. The first reference building (hotel use) shows a maximum reduction of primary energy and CO2 emission of about 42%, falling within the CasaClima energy class D, while the second reference building (residential use) achieves a value of 88% for primary energy and 85% for CO2 emissions, falling into class B. Thermal dispersions through the envelope can be limited using a suitable combination of insulating materials while a variety of technical variants are selected, such as VRF (variant refrigerant flow) systems, heat pumps with fan coils associated with controlled mechanical ventilation, solar thermal and photovoltaic. This paper illustrates the development of energy retrofit projects, in order to reach a balance between efficiency measures and costs for a building having two different uses, providing guidance to similar case studies related to a warm climate. [ABSTRACT FROM AUTHOR]

The objective of this paper is to investigate the cause of several unexpected high amplitude oscillations that occurred in the surge tank water level of a real hydropower plant during secondary load-frequency control (LFC) maneuvers, after the replacement of the turbine runner, and to propose solutions that allow the power plant to continue providing secondary LFC in a safe and reliable manner. For this purpose, a simulation model has been developed and calibrated from data gathered during several on-site tests. Two different solutions are proposed in order to cope with the observed problem: using a state-dependent load change rate limiter or modifying the hydro turbine governor gains; the turbine governor remains the same as before the runner replacement. The proposed solutions are tested against a set of realistic secondary LFC signals by means of simulations and compared to each other as a function of the probability that the surge tank water level descends below a minimum safe level and the quality of the secondary LFC response. The results presented in the paper demonstrate the validity of the methodology proposed to determine the state-dependent ramp limit, as well as its effectiveness to prevent the surge tank drawdown and to provide clear insight into the trade-off between response quality and power plant safety. [ABSTRACT FROM AUTHOR]

The current European energy policies have an influence on the need to rehabilitate the housing stock in order to meet the objectives of the European Union. Most of this housing stock was built without any type of energy regulation in adverse technical and economic conditions and thus is now energetically obsolete. The major rehabilitation effort required must be approached through actions based on previous quantitative energy knowledge of the existing buildings in order to guarantee the efficiency of energy-retrofitted solutions. This assessment can be carried out through monitoring dwellings conditioned by use patterns; through simulation programs, which do not usually offer faithful representations of energy conditions; or by using test cells, which allow us to evaluate a controlled indoor environment without the influence of users. The objective of this paper is to present the design and performance of test cells as an experimental method for vertical facade analysis in order to tackle the problem of retrofitting residential buildings in a Mediterranean climate, taking into account energy and environment. With this equipment, efficiency and energy savings, as well as illumination and interior air quality, can be simultaneously and comprehensively evaluated. [ABSTRACT FROM AUTHOR]

This study fills in knowledge gaps for the European air-conditioning (AC) market, which is fundamentally important to raising awareness about primary energy utilization. In contrast to space heating (SH) and domestic hot water (DHW) preparation, the European Union (EU) AC market is barely explored in scientific literature. While the focus of previous research has been on the residential sector, a shortfall of data for the services (wholesale and retail, offices, education, health, hotels and bars) exists. In this paper, data describing the actual space cooling (SC) market in Europe (quantity of SC units, equivalent full-load hours, installed capacities, seasonal energy efficiency values as well as cooled floor area per AC type and/or sector) is collected and explored using a bottom-up approach. Results indicate that SC is responsible for a significant portion of EU electricity consumption in households (nearly 5%) and even more in the service sector (~13%). Energy consumption for SC in the EU28 appears to be more than 140 TWh/y. The quantification of the European AC consumption shows a significant difference between the service and residential sectors: about 115 versus 25 TWh/y respectively. The SC market in Europe is characterized by a high potential for growth, especially in households. [ABSTRACT FROM AUTHOR]

Nuclear energy is presently the single major low-carbon electricity source in Europe and is overall expected to maintain (perhaps eventually even increase) its current installed power from now to 2045. Long-term operation (LTO) is a reality in essentially all nuclear European countries, even when planning to phase out. New builds are planned. Moreover, several European countries, including non-nuclear or phasing out ones, have interests in next generation nuclear systems. In this framework, materials and material science play a crucial role towards safer, more efficient, more economical and overall more sustainable nuclear energy. This paper proposes a research agenda that combines modern digital technologies with materials science practices to pursue a change of paradigm that promotes innovation, equally serving the different nuclear energy interests and positions throughout Europe. This paper chooses to overview structural and fuel materials used in current generation reactors, as well as their wider spectrum for next generation reactors, summarising the relevant issues. Next, it describes the materials science approaches that are common to any nuclear materials (including classes that are not addressed here, such as concrete, polymers and functional materials), identifying for each of them a research agenda goal. It is concluded that among these goals are the development of structured materials qualification test-beds and materials acceleration platforms (MAPs) for materials that operate under harsh conditions. Another goal is the development of multi-parameter-based approaches for materials health monitoring based on different non-destructive examination and testing (NDE&T) techniques. Hybrid models that suitably combine physics-based and data-driven approaches for materials behaviour prediction can valuably support these developments, together with the creation and population of a centralised, "smart" database for nuclear materials. [ABSTRACT FROM AUTHOR]

Energy communities (ECs), intended as collective action initiatives in the energy field involving citizens' participation, have been gaining relevance for the past decades as an alternative way to organize the energy chain to challenge the incumbent system. With Europe's recently adopted Clean Energy Package, ECs found a formal recognition by the European Union as potential actors of the transition of the energy system towards a wider and more decentralized use of renewable sources. Although the potential role of ECs in the transition is therefore hardly questionable, a thorough comprehension of the enabling factors that might foster their diffusion and scaling up is still lacking. Through a comparative analysis of the evolutionary trajectories in six EU countries regarding their energy systems, their regulatory frameworks and their historical evolution of ECs, namely through the example of cooperative models, this paper aims at providing some preliminary evidence about the factors and dynamics that seem to have played, and may play, a role in hampering or facilitating EC model diffusion. Attention is therefore specifically paid to three dimensions of analysis referring to: the energy mix and market structure; the institutional and policy landscape; the wider social attitudes towards environmental issues and cooperation among citizens. In addition to providing a wide comparison of different EU countries, the paper shows that the historical evolution pathways have to be carefully taken into account to understand what might trigger ECs exploitation in the EU. [ABSTRACT FROM AUTHOR]

Renewable energy has a crucial role in facing climate change. One promising strategy is the creation of energy communities that require active involvement from a bottom-up perspective. Their implementation is difficult, as they currently rely on local policies, community readiness, and technological availability. The objective of this paper is to provide a qualitative overview of energy community concepts and strategies at the European level. The aim is to identify common approaches that are framing the development of energy communities, and to understand the most successful steps leading to their creation and growth. To achieve this objective, a threefold methodology is provided: (1) an updated review on policies dealing with energy communities at the European and Italian level; (2) a qualitative overview of European-funded projects under the Horizon 2020 work program; and (3) a qualitative overview of some of the most successful existing energy communities in Europe. The results outline a series of considerations and lessons learned that are useful for implementing this transition pathway in a real case, which is also presented in the paper. The conclusions will identify some future directions of this research, particularly in relation to the results coming from the implementation of actions in the real case. [ABSTRACT FROM AUTHOR]

Renewable energy sources are vital to achieving Europe's 2030 energy transition goals. Technological innovation, driven by public expenditures on research and development, is a major driver for this change. Thus, an extensive dataset on these expenditures of the European Member States and the European Commission, dating back to the early 1970s, was created. This paper creates predictive scenarios of public investment in renewable energy research and development in Europe based on this historical dataset and current trends. Funding from both, European Member States and the European Commission, between today and 2030 are used in the analysis. The impact on the cumulative knowledge stock is also estimated. Two projection scenarios are presented: (1) business as usual; and (2) an advanced scenario, based on the assumption that the Mission Innovation initiative causes public expenditures to increase in the coming years. Both scenarios are compared to the European 2030 climate and energy framework target sets. Results indicate that Member States in Europe currently tend to fund renewables more than the European Commission, but funding from both sources is expected to increase in the future. Furthermore, the European Commission distributes its funding more equally across the various renewable energy sources than Member States. [ABSTRACT FROM AUTHOR]

The power-to-methane technology is promising for long-term, high-capacity energy storage. Currently, there are two different industrial-scale methanation methods: the chemical one (based on the Sabatier reaction) and the biological one (using microorganisms for the conversion). The second method can be used not only to methanize the mixture of pure hydrogen and carbon dioxide but also to methanize the hydrogen and carbon dioxide content of low-quality gases, such as biogas or deponia gas, enriching them to natural gas quality; therefore, the applicability of biomethanation is very wide. In this paper, we present an overview of the existing and planned industrial-scale biomethanation facilities in Europe, as well as review the facilities closed in recent years after successful operation in the light of the scientific and socioeconomic context. To outline key directions for further developments, this paper interconnects biomethanation projects with the competitiveness of the energy sector in Europe for the first time in the literature. The results show that future projects should have an integrative view of electrolysis and biomethanation, as well as hydrogen storage and utilization with carbon capture and utilization (HSU&CCU) to increase sectoral competitiveness by enhanced decarbonization. [ABSTRACT FROM AUTHOR]

This paper presents a novel framework architecture for an online, real-time flexibility assessment and activation platform targeted at unlocking the flexibility potential of commercial buildings and smaller industrial sites, thereby enabling greater levels of renewable grid integration. Renewable integration targets in Europe of up to 40% of power generation from renewable sources by 2030 and over 90% by 2050 aim to decarbonize the electrical grid and increase electrification of transport, industry, and buildings. As renewable integration targets increase, participation in flexibility programs will be required from a much greater range of buildings and sites to balance grids hosting high levels of renewable generation. In this paper, an online implementation of a standardized flexibility assessment methodology, previously developed for offline contract negotiations between stakeholders, is modified to automate the assessment. The automated assessment is then linked to an aggregator-based multi-building or site optimization stage, enabling increased participation of multiple buildings and sites. To implement the assessment, models for individual flexible systems were reviewed, selected, and adapted, including physics-based, data-driven, and grey-box models. A review of optimization for flexibility found mixed-integer linear programming to be the optimal approach for the selection of flexible systems for demand response events. [ABSTRACT FROM AUTHOR]

Buildings, energy, and the environment are key issues facing construction around the world. The energy efficiency of buildings is a key topic when it comes to reducing the world's energy consumption, releasing harmful gases, and global climate change, as they consume about 40% of the world's energy supplies. Heat losses in buildings reduce the energy performance of buildings and are basically important to them. In the paper, the authors focus on the main problems related to heat losses generated by chimney systems, which are inseparable equipment of building structures, resulting in lower energy efficiency and, at the same time, technical efficiency and durability of the building partitions themselves. Authors present thermal imaging with its contribution to the detection of heat losses, thermal bridges, insulation problems, and other performance disturbances, and then verifications using appropriate simulation models. The mathematical apparatus of artificial neural networks was implemented to predict the temperature distributions on the surfaces of prefabricated chimney solutions. In Europe, we can often find a large building substance equipped with traditional chimneys, which disrupts the current trend of striving to reduce energy consumption, especially that derived from fossil fuels. Speaking of energy-efficient buildings, one should not ignore those that, without additional security and modern installations, are constantly used in a very wide range. Therefore, the article deals with an essential problem that is not perceived in design studies and during the operation period as having a basis in incorrect architectural solutions and which can be easily eliminated. It concerns the cooling of internal partitions of buildings on their last storeys, in places where chimneys are located, regardless of their function. The authors of the paper decided to take a closer look at this phenomenon, which may allow the limiting of its effects and at the same time reduce its impact on the energy performance of technologically older buildings. [ABSTRACT FROM AUTHOR]

There are international activities and on-going initiatives, particularly at the European level, to define what Positive Energy Districts should be, as the driving concept for the urban transition to a sustainable future. The first objective of the paper is to contribute to the on-going and lively debate about the definition of the notion of Sustainable Plus Energy Neighbourhood (SPEN), which highlights the multiple dimensions when talking about sustainability in districts moving beyond the traditional and strict building energy assessment. Based on a holistic methodology which ensures the consideration of the multidimensional nature and goals of SPEN, the paper outlines an evaluation framework. The evaluation framework defines the key performance indicators distributed in five categories that consider energy and power performance, GHG emissions, indoor environmental quality, smartness, flexibility, life cycle costs and social sustainability. This framework is designed to be implemented during integrated design processes aiming to select design options for a neighbourhood as well within during the operational phase for monitoring its performance. Further work will include the implementation and validation of the framework in four real-life positive energy neighbourhoods in different climate zones of Europe as part of syn.ikia H2020 project. [ABSTRACT FROM AUTHOR]

The global demand for electricity is rising due to the increased electrification of multiple sectors of economic activity and an increased focus on sustainable consumption. Simultaneously, the share of cleaner electricity generated by transient, renewable sources such as wind and solar energy is increasing. This has made additional buffer capacities for electrical grids necessary. Battery energy storage systems have been investigated as storage solutions due to their responsiveness, efficiency, and scalability. Storage systems based on the second use of discarded electric vehicle batteries have been identified as cost-efficient and sustainable alternatives to first use battery storage systems. Large quantities of such batteries with a variety of capacities and chemistries are expected to be available in the future, as electric vehicles are more widely adopted. These batteries usually still possess about 80% of their initial capacity and can be used in storage solutions for high-energy as well as high-power applications, and even hybrid solutions encompassing both. There is, however, no holistic review of current research on this topic. This paper first identifies the potential applications for second use battery energy storage systems making use of decommissioned electric vehicle batteries and the resulting sustainability gains. Subsequently, it reviews ongoing research on second use battery energy storage systems within Europe and compares it to similar activities outside Europe. This review indicates that research in Europe focuses mostly on "behind-the-meter" applications such as minimising the export of self-generated electricity. Asian countries, especially China, use spent batteries for stationary as well as for mobile applications. In developing countries, off-grid applications dominate. Furthermore, the paper identifies economic, environmental, technological, and regulatory obstacles to the incorporation of repurposed batteries in second use battery energy storage systems and lists the developments needed to allow their future uptake. This review thus outlines the technological state-of-the-art and identifies areas of future research on second use battery energy storage systems. [ABSTRACT FROM AUTHOR]

Battery energy storage is becoming an important asset in modern power systems. Considering the market prices and battery storage characteristics, reserve provision is a tempting play fields for such assets. This paper aims at filling the gap by developing a mathematically rigorous model and applying it to the existing and future electricity market design in Europe. The paper presents a bilevel model for optimal battery storage participation in day-ahead energy market as a price taker, and reserve capacity and activation market as a price maker. It uses an accurate battery charging model to reliably represent the behavior of real-life lithium-ion battery storage. The proposed bilevel model is converted into a mixed-integer linear program by using the Karush–Kuhn–Tucker optimality conditions. The case study uses real-life data on reserve capacity and activation costs and quantities in German markets. The reserves activation quantities and activation prices are modeled by a set of credible scenarios in the lower-level problem. Finally, a sensitivity analysis is conducted to comprehend to what extent do battery storage bidding prices affect its overall profit. [ABSTRACT FROM AUTHOR]

In the renewable energy source (RES) market, which is highly atomized, business events play an important role in supporting inter-organizational cooperation. The aim of this paper was to examine the impact of three characteristics of the events, namely, the location of the event, type of event (brokerage event versus company mission), and type of leading partner (public versus private), on the effectiveness of the business events (expressed by the number of meetings during an event and the number of partnerships initiated as a result of these meetings). We analyzed 304 promotional events organized in the European RES market. We employed basic statistical tests to verify our hypotheses. Our findings suggest that (1) the numbers of meetings and partnerships differ depending on the event's location (country and region of Europe), (2) the type of the event (brokerage event versus company mission) affects the numbers of meetings and partnerships (in particular, during brokerage events (BEs), significantly more meetings take place than during company meetings (CMs)), and (3) the type of an event's leading partner (public versus private) has no impact on the numbers of meetings and partnerships. With its findings, this paper contributes to RES market development and the theory of inter-organizational relations. It presents meaningful implications and recommendations for enterprises, business networks, and event managers operating in RES markets. [ABSTRACT FROM AUTHOR]

Greening structures attract worldwide attention because of their multidisciplinary benefits. Green roofs are considered one of the best ways to eliminate summer overheating, mitigate climate change, or reduce the urban heat island effect. The winter season and its impact on building energy consumption are often overlooked. Common standards do not take a green roof structure into consideration because of possible high water content in their layers. Additional roof layers may have a positive effect during the winter; they help reduce surface overcooling in cloudless winter nights. This paper analyses experimental measurements taken on two different extensive green roofs and compares the results with a single-ply roof (R) with a PVC membrane. Surface overcooling of the R due to radiation reaching up to 10 °C, whereas the green roof membrane is protected. The influence of thermal loss is not so important for the current climate in Central Europe, as the required U-values are lower than 0.1. The temperature difference is reduced from 17 °C on the membrane to 0.7 °C on the top of the concrete slab. The green roof is still advantageous, and the vegetation surface has better thermal stability. The advantage is clearly recognisable in the area of the condensation zone. The difference between these two extensive green roofs is very small in regard to the accuracy of the temperature sensors. The outcome showed the thermal loss reduction compared to the common flat roof; however, after analysis, it was more marginal than expected. [ABSTRACT FROM AUTHOR]

In the acceleration phase transitions often increase in depth and scope, and thereby create knock-on effects for wider system structures. In the renewable energy transition, for example, higher shares of intermittent renewable energy sources call for new grid technologies to increase flexible grid operation. At the same time, there are different ways of achieving renewable energy transitions and providing flexibility. In Europe, important tensions exist over how centralised or decentralised a renewable energy electricity system should be. This paper explores to what extent and how European framework programmes for research and development have addressed and supported innovation in transmission grid (centralised system) and distribution grid (decentralised) technologies. We analyse European R&D projects that studied electricity grid planning, development and innovation over 2002–2020. We apply social network analysis of the collaboration partners in these projects, and analyse the calls for proposals issued by three European Framework Programmes: FP6, FP7 and Horizon 2020. The framework programmes have addressed energy-related issues, but the priorities have changed over time, reflecting the ongoing energy transition. We ask if the importance of transmission grid vs. distribution grid has changed over time, and if and how the collaboration patterns have changed. [ABSTRACT FROM AUTHOR]

With the increasing demand for renewable energy and sustainable waste treatment, biogas production is expanding. Approximately four billion litres of bio-ethanol are produced annually for vehicle fuel in Europe, resulting in the production of large amounts of stillage residues. This stillage is energy-rich and can be used for biogas production, but is a challenging substrate due to its high levels of nitrogen and sulphate. At the full-scale biogas production plant in Norrköping, Sweden (Svensk Biogas i Linköping AB), thin grain stillage is used as a biogas substrate. This paper describes the plant operation and strategies that have been implemented to digest thin stillage successfully. High ammonia concentrations in the digester have resulted in syntrophic acetate oxidation (SAO) becoming the major pathway for acetate degradation. Therefore, a long hydraulic retention time (HRT) (40-60 days) is used to allow the syntrophic acetate-oxidising bacteria time to grow. The high sulphate levels in thin stillage result in high levels of hydrogen sulphide following degradation of protein and the activity of sulphate-reducing bacteria (SRB), the presence of which has been confirmed by quantitative polymerase chain reaction (qPCR) analysis. To optimise biogas production and maintain a stable process, the substrate is diluted with tap water and co-digested with grain residues and glycerine to keep the ammonium nitrogen (NH4-N) concentration below 6 g L-1. Combined addition of iron, hydrochloric acid and cobalt successfully precipitates sulphides, reduces ammonia toxicity and supplies microorganisms with trace element. Mesophilic temperature (38 °C) is employed to further avoid ammonia toxicity. Together, these measures and doubling the digester volume have made it possible to increase annual biogas production from 27.7 TJ to 69.1 TJ. [ABSTRACT FROM AUTHOR]