Search

With the continuous improvement of shale oil and gas recovery technologies and achievements, a large amount of geological information and data have been accumulated for the description of shale reservoirs, and it has become possible to use machine learning methods for "sweet spots" prediction in shale oil and gas areas. Taking the Duvernay shale oil and gas field in Canada as an example, this paper attempts to build recoverable shale oil and gas reserve prediction models using machine learning methods and geological and development big data, to predict the distribution of recoverable shale oil and gas reserves and provide a basis for well location deployment and engineering modifications. The research results of the machine learning model in this study are as follows: ① Three machine learning methods were applied to build a prediction model and random forest showed the best performance. The R2 values of the built recoverable shale oil and gas reserves prediction models are 0.7894 and 0.8210, respectively, with an accuracy that meets the requirements of production applications; ② The geological main controlling factors for recoverable shale oil and gas reserves in this area are organic matter maturity and total organic carbon (TOC), followed by porosity and effective thickness; the main controlling factor for engineering modifications is the total proppant volume, followed by total stages and horizontal lateral length; ③ The abundance of recoverable shale oil and gas reserves in the central part of the study area is predicted to be relatively high, which makes it a favorable area for future well location deployment. [ABSTRACT FROM AUTHOR]

Geothermal energy exploration, development, and research have been ongoing in Canada for several decades. The country's cold climate and the push to develop renewable energy sources have driven interest in geothermal energy. Despite this drive, regulatory complexities and competition with other relatively inexpensive energy sources with existing infrastructure have hindered development. As such, interest has grown and waned with changes in the energy economy over several decades, leaving many projects at a standstill. As of January 2023, there are currently no operational geothermal power projects in Canada. Many hot spring pool and spa complexes remain active, and Canada is a leading country in the installation of ground source heat pumps (GSHPs; also called geo-exchange systems). However, in the last decade, the interest in deep geothermal systems has renewed, with many new projects starting up across several provinces and territories. Moreover, projects that had shown limited progress for many years—such as Mount Meager in British Columbia—have begun to renew their development efforts. Research is also expanding within prominent research groups and universities. The areas of focus include both building upon previous studies (such as thermal gradients and the heat flow in sedimentary basins) and researching new methods and resources (such as GSHPs, closed-loop systems, integrated geothermal operations, and hybrid systems, including heat storage). The development is supported by federal, provincial, and territorial governments through grants and the development of regulatory frameworks. Although challenges still remain for Canada to develop its geothermal energy resources, several power, thermal, and co-production projects, ongoing research, funding, and regulatory acts are all moving forward to support geothermal development. This paper aims to study Canada's geothermal energy update in 2023 regarding the aspects mentioned above. [ABSTRACT FROM AUTHOR]

This paper presents the findings of fifteen energy audits conducted on industrial sites in Canada's Greater Toronto Area (GTA). The audits covered a range of industries including food processing, packaged goods, and finishing processes (powder-coating). The primary focus of the audits was to analyze the natural gas consumption and the performance of major-gas-consuming equipment. The audits identified natural-gas-consuming equipment that could be optimized to yield energy and operational cost savings and greenhouse gas (GHG) reduction opportunities. Food production plants' energy intensity ranges from 5.59 m3/ft2 to 17.73 m3/ft2. Therefore, there is a significant opportunity to improve energy consumption through better technology integration. The results of the audits indicate a trend of an increase in the percentage of non-productive consumption with non-productive time. The proposed energy-saving measures include reducing non-productive natural gas consumption, gas-fired equipment tune-up, optimizing boiler loads, and reducing oven exhaust by using variable frequency drives (VFDs). The findings of this study could be used to develop a demand-side management program specifically for small- and medium-sized industrial facilities in the Greater Toronto Area and other parts of Canada. [ABSTRACT FROM AUTHOR]

Heating, ventilation, and air conditioning (HVAC) systems play a crucial role in either increasing or decreasing the risk of airborne disease transmission. High ventilation, for instance, is a common method used to control and reduce the infection risk of airborne diseases such as COVID-19. On the other hand, high ventilation will increase energy consumption and cost. This paper proposes an optimal HVAC controller to assess the trade-off between energy consumption and indoor infection risk of COVID-19. To achieve this goal, a nonlinear model predictive controller (NMPC) is designed to control the HVAC systems of a university building to minimize the risk of COVID-19 transmission while reducing building energy consumption. The NMPC controller uses dynamic models to predict future outputs while meeting system constraints. To this end, a set of dynamic physics-based models are created to capture heat transfer and conservation of mass, which are used in the NMPC controller. Then, the developed models are experimentally validated by conducting experiments in the ETLC building at the University of Alberta, Canada. A classroom in the building is equipped with a number of sensors to measure indoor and outdoor environmental parameters such as temperature, relative humidity, and CO 2 concentration. The validation results show that the model can predict room temperature and CO 2 concentration by 0.8%, and 2.4% mean absolute average errors, respectively. Based on the validated models, the NMPC controller is designed to calculate the optimal airflow and supply air temperature for every 15 min. The results for real case studies show that the NMPC controller can reduce the infection risk of COVID-19 transmission below 1% while reducing energy consumption by 55% when compared to the existing building controller. [ABSTRACT FROM AUTHOR]

Unconventional oil and gas formations are abundant, have become an increasingly important part of the global energy supply, and are attracting increasing attention from the industry. Predicting key reservoir properties plays a significant role in both geological science and subsurface engineering workflows. With the advent of horizontal well drilling and multiple-stage hydraulic fracturing, the Montney Shale formation is one of the most promising and productive shale plays in Canada. However, very few academic papers discuss its in situ stress, reservoir pressure, and permeability, which are essential for the development of the Montney Shale. The objective of this study is to analyze the geo-stress, the pore pressure, and several key reservoir properties by using diagnostic fracture injection test (DFIT) data from the Montney Shale. One horizontal well from the Wapiti field has been analyzed with a set of DFIT data, and its results show that the general pressure and Gdp/dG responses from Well-A indicate a signature of height recession/transverse storage. In the study, the Tangent Line method, the Compliance method, and the Variable Compliance method have been applied to estimate the key reservoir properties. As a result, the Well-A DFIT analysis estimates that the closure pressure is ranging from 34.367 to 39.344 MPa, contributing to the stress gradient from 14.09 to 16.13 KPa/m for the formation. The pore pressure is ranging from 20.82 to 24.58 MPa, contributing to the pore pressure gradient from 8.54 to 10.07 KPa/m for the formation. The porosity is ranging from 3% to 6%. These reservoir properties are contoured cross the Montney Shale formation. Using the DFIT's numerical simulation and history matching, the reservoir permeability is 0.024 md, fracture length is 13.44 m, and fracture geometries are analyzed by different models. Moreover, the physics behind the DFIT are analyzed and discussed in detail. For the first time, three different analysis methods have been applied to estimate a series of key reservoir properties for the case wells in the Montney Shale formation. This approach can not only reduce the potential prediction error caused by a single method application but also increase the persuasiveness of the assessment and save time, ensuring the efficient implementation of engineering operations. Given the significance of quantifying in situ stress and reservoir pore pressure in unconventional hydrocarbon exploration and development, this study could help the operator to quickly understand the stress regimes, the fracture geometry, and the formation properties of the Montney Shale formation in the Wapiti field. Furthermore, the interpreted results demonstrated in this paper are adding substantial business value to the asset, especially in terms of improving the hydraulic fracturing design and, thus, accelerating the cashflow from production. [ABSTRACT FROM AUTHOR]

Global warming might be mitigated if emissions were interrupted through carbon capture technologies, as there is a significant amount of comprehensive studies on them. An outline of the main gaps and trends of a technology is critical for further development. In this context, this study provides an overview of calcium looping carbon capture processes that have proven their potential and commercial viability. A bibliometric analysis is conducted on both Scopus and Web of Science database by seeking the keywords "calcium looping", "co2 capture", and "fluidized bed" in titles, abstracts, and keywords. Word selection was based on a list of relevant papers on the topic. These items of data have been processed and analyzed based on the number of publications and citations by emphasizing recent publication evolution, journal influence, the use of specific keywords, and co-citation. Results reveal that the European Union (EU) leads the rankings on the topic, followed by Canada. Keyword choice might have affected the number of citations. Recent studies used limestone as a sorbent and a dual fluidized bed reactor with a calciner or resistance depending on its size. Most studies are focused on technology scale-up. Although scale-up seems to be a priority, multiple studies are designed to assess the effect of steam generation and SO 2 on the process. [ABSTRACT FROM AUTHOR]

Remote community initiatives for renewable energy are rapidly emerging across Canada but with varying numbers, success rates, and strategies. To meet low-carbon transition goals, the need to coordinate technology deployment and long-term policy to guide the adoption is critical. Renewable resources such as wind, solar, hydro, and biomass can provide energy at a subsidized cost, create sustainable infrastructure, and provide new economic viability in social value integration. The renewable energy transition is crucial to Canada in sustaining remote and indigenous communities by providing local, clean, and low-carbon-emission energy for heat, power, and possibly transportation. This paper identified 635 renewable resources projects deployed to improve and increase electricity supply. To an extent, balancing demand within the remote and indigenous communities of Canada and highlighting sustainable renewable energy development through ownership participation within the communities is achievable before 2050 and beyond through energy efficiency and the social value of energy. The article identifies clean energy targets as mandated by the different provinces in Canada to reach net-zero GHG emissions. [ABSTRACT FROM AUTHOR]

There is a large amount of drilling core data in the Mackay River oil sands block in Canada, and the accurate identification of facies from the cores is important and necessary for the understanding of the subsurface reservoir. The traditional recognition method of facies from cores is by human work and is very time consuming. Furthermore, the results are different according to different geologists because of the subjective judgment criterion. An efficient and objective method is important to solve the above problem. In this paper, the deep learning image-recognition algorithm is used to automatically and intelligently recognize the facies type from the core image. Through a series of high-reliability preprocessing operations, such as cropping, segmentation, rotation transformation, and noise removal of the original core image, that have been manually identified, the key feature information in the images is extracted based on the ResNet50 convolutional neural network. On the dataset of about 200 core images from 13 facies, an intelligent identification system of facies from core images is constructed, which realizes automatic facies identification from core images. Comparing this method with traditional convolutional neural networks and support vector machines (SVM), the results show that the recognition accuracy of this model is as high as 91.12%, which is higher than the other two models. It is also shown that for a relatively special dataset, such as core images, it is necessary to rely on their global features in order to classify them, and, with a large similarity between some of the categories, it is extremely difficult to classify them. The selection of a suitable neural network model can have a great impact on the accuracy of recognition results. Then, the recognized facies are input as hard data to construct the three-dimensional facies model, which reveals the complex heterogeneity and distribution of the subsurface reservoir for further exploration and development. [ABSTRACT FROM AUTHOR]

Studies related to oil and gas wells have attracted worldwide interest due to the increasing energy shortfall and the requirement of sustainable development and environmental protection. However, the state of oil and gas wells in terms of research characteristics, technological megatrends, article-produced patterns, leading study items, hot topics, and frontiers is unclear. This work is aimed at filling the research gaps by performing a comprehensive bibliometric analysis of 6197 articles related to oil and gas wells published between 1900 and 2021. VOSviewer and CiteSpace software were used as the main data analysis and visualization tools. The analysis shows that the annual variation of article numbers, interdisciplinary numbers, and cumulative citations followed exponential growth. Oil and gas well research has promoted the expansion of research fields such as engineering, energy and fuels, geology, environmental sciences and ecology, materials science, and chemistry. The top 10 influential studies mainly focused on shale gas extraction and its impact on the environment. More studies were produced by larger author teams and inter-institution collaborations. Elkatatny and Guo have greatly contributed to the application of artificial intelligence in oil and gas wells. The two most contributing institutions were the Southwest Petr Univ and China Univ Petr from China. The People's Republic of China, the US, and Canada were the countries with the most contributions to the development of oil and gas wells. The authoritative journal in engineering technology was J Petrol Sci Eng, in environment technology was Environ Sci Technol, in geology was Aapg Bull, and in materials was Cement Concrete Res. The keyword co-occurrence network cluster analysis indicated that oil well cement, new energy development, machine learning, hydraulic fracturing, and natural gas and oil wells are the predominant research topics. The research frontiers were oil extraction and its harmful components (1992–2016), oil and gas wells (1997–2016), porous media (2007–2016), and hydrogen and shale gas (2012–2021). This paper comprehensively and quantitatively analyzes all aspects of oil and gas well research for the first time and presents valuable information about active and authoritative research entities, cooperation patterns, technology trends, hotspots, and frontiers. Therefore, it can help governments, policymakers, related companies, and the scientific community understand the global progress in oil and gas well research and provide a reference for technology development and application. [ABSTRACT FROM AUTHOR]

"Short-term load forecasting (STLF)" is increasingly significant because of the extensive use of distributed energy resources, the incorporation of intermitted RES, and the implementation of DSM. This paper provides a novel ensemble forecasting model with wavelet transform for the STLF depending on the decomposition principle of load profiles. The model can effectively capture the portion of daily load profiles caused by seasonal variations. The results indicate that it is possible to improve STLF accuracy with the proposed method. The proposed approach is tested with the data taken from Ontario's electricity market in Canada. The results show that the proposed technique performs well in-terms of prediction when compared to existing traditional and cutting-edge methods. The performance of the model was validated with different datasets. Moreover, this approach can provide accurate load forecasting using ensemble models. Therefore, utilities and smart grid operators can use this approach as an additional decision-making tool to improve their real-time decisions. [ABSTRACT FROM AUTHOR]

In Canada, many mines have adopted the sublevel stoping method, such a blasthole stoping (BHS), to extract steeply deposited minerals. Sill pillars are usually kept in place in this mining method to support the weight of the overburden in underground mining. To prolong the mine's life, sill pillars will be recovered, and sill pillar recovery could cause failures, fatality, and equipment loss in the stopes. In this paper, three sill pillar recovery schemes—SBS, SS1, and SS2—were proposed and conducted to assess the feasibility of recovering two sill pillars in a hard rock mine by developing a full-sized three-dimensional (3D) analysis model employing the finite element method (FEM). The numerical model was calibrated by comparing the model computed ground settlement with the in situ monitored ground settlement data. The rockburst tendency of the stope accesses caused by the sill pillar recovery was assessed by employing the tangential stress (Ts) criterion and burst potential index (BPI) criterion. All three proposed sill pillar recovery schemes were feasible and safe to recover the sill pillars in this hard rock mine, and the scheme SBS was the optimum one among the three schemes. [ABSTRACT FROM AUTHOR]

Oil sands, as unconventional oil, are so essential to both Canada and the world that special attention should be paid to their extraction status, especially their energy efficiency. One of the most commonly used methods to evaluate energy efficiency is the Energy Return on Investment (EROI) analysis. This paper focuses on EROI analysis for both in situ oil sands and mining oil sands over the period of 2009 to 2015. This time period represents an extension to periods previously considered by other analyses. An extended Input-Output model is used to quantify indirect energy input, which has been ignored by previous analyses of oil sands extraction. Results of this paper show that EROI of both mining oil sands (range of value: 3.9–8) and in situ oil sands (range of value: 3.2–5.4) display an upward trend over the past 7 years; EROI of mining oil sands is generally higher, but is more fluctuating than the EROI of in situ oil sands. Compared with EROI of other hydrocarbons, the EROI of oil sands is still quite low, despite the fact that it is increasing gradually. [ABSTRACT FROM AUTHOR]

This paper reports on early work and concept development for Optimal Mine Site Energy Supply, where the specific energy supply requirements and constraints for mineral production operations are considered against methodologies that have been applied for other sectors and in other energy policy regimes. The primary motivation for this research is to help ensure that Canadian mineral producers will achieve reduced production costs through improvements in the efficiency with which they consume energy resources. Heat has not yet been considered for the mining sector in an integrated manner, which makes polygeneration of great interest. The methodology that optimizes configuration of polygeneration systems for mine sites has not been reported before. The variety of mining circumstances, temporal variations in energy prices, institutional inertia, and conservatism in design for mines are some of the reasons for this. This paper reviews some aspects of precedent energy management practice in mineral operations, which highlights energy challenges characteristic of the sector and sets out the initial formulation of optimal mine site energy supply. The review indicates the additional benefits of energy supply systems for mine sites that concurrently meet all utilities. [ABSTRACT FROM AUTHOR]

The Government of Canada has embraced circular economy and is supporting an increasing number of initiatives in the field. However, implementation examples remain scattered and certain stakeholders are eager to see a greater level of commitment from policy makers. The purpose of this study is to provide a Canadian perspective on how, and to what extent, forest products are compatible with circular economy strategies. This topic was investigated through interviews with 16 Canadian experts in eco-design, circular economy, forest products and/or waste management, with a focus on construction and packaging. Efforts made by forest industries at the manufacturing stage to reduce resource consumption were acknowledged, but the implementation of other circular economy strategies, such as reuse, recycling and energy recovery, is uneven. While there is low-hanging fruit for incremental improvements, such as the processing of recovered lumber in wood panels and not mixing cardboard fibres with other paper streams to avoid downcycling, several barriers to the widespread adoption of the most promising strategies were identified. The experts consulted proposed several solutions to accelerate the deployment of circular economy strategies for forest products, for which government interventions would need to be tailored to the different policy readiness levels (PRLs) observed in the construction and packaging sectors. With circularity having economy-wide implications, setting a clear policy direction at the national level, with a circular economy roadmap for Canada for example, could accelerate coordinated implementation within and across sectors, including forest industries. [ABSTRACT FROM AUTHOR]

With the implementation of new policies supporting renewable natural gas production from organic wastes, Canada began replacing traditional disposal methods with highly integrated biogas production strategies. Herein, data from published papers, Canadian Biogas Association, Canada's national statistical agency, and energy companies' websites were gathered to gain insight into the current status of anaerobic digestion plants in recovering energy and resource from organic wastes. The availability of materials prepared for recycling by companies and local waste management organizations and existing infrastructures for municipal solid waste management were examined. Governmental incentives and discouragements in Canada and world anaerobic digestion leaders regarding organic fraction municipal solid waste management were comprehensively reviewed to identify the opportunities for developing large-scale anaerobic digestion in Canada. A range of anaerobic digestion facilities, including water resource recovery facilities, standalone digesters, and on-farm digesters throughout Ontario, were compared in terms of digestion type, digester volume, feedstock (s), and electricity capacity to better understand the current role of biogas plants in this province. Finally, technology perspectives, solutions, and roadmaps were discussed to shape the future in terms of organic fraction municipal solid waste management. The findings suggested that the biogas industry growth in Canada relies on provincial energy and waste management policies, advanced technologies for diverting organic waste from landfills, improving biogas yield using existing pretreatment methods, and educating farmers regarding digester operations. [ABSTRACT FROM AUTHOR]

In cold climatic regions such as those located across Canada, it is necessary to implement heating system technology that is ultra-efficient and that has near-zero rates of emissions. Such systems would satisfy consumers' energy needs and also comply with environmental standards, especially because the systems would account for more than 80% of residential energy use. This paper investigates two complementary efficient systems that can support these heating systems; ground-source heat pumps (GSHPs) and organic Rankine cycle systems (ORCs). The study proposes to couple these two systems in a parallel configuration. A dynamic simulation model created in TRNSYS platform has been deployed to assess the performance of the combined ORC-GSHP based micro-cogeneration system. This former provides heating to a residential house during the heating mode as needed. It has the capacity to switch to a charging mode, during which the ORC system is directly coupled to the ground heat exchanger (GHE), which works as a thermal energy storage and supplies energy to the GSHP. The feasibility of this combined system arrangement, and its comparison with a conventional GSHP system are examined for use in residential buildings in three cities across the varied climatic regions within Canada, namely Edmonton (AB), Halifax (NS), and Vancouver (BC). Results showed that the proposed micro-cogeneration system recorded less energy use of over 80%. The addition of the ORC system had a definite effect on the performance of the GSHP in that it decreased the operating hours from 11–58% compared to the conventional GSHP case and maintained consistently higher COP values. These results may help to specify viable ORC-GSHP based micro-co/trigeneration systems in cold climatic applications and should be useful for prototype design and development. [ABSTRACT FROM AUTHOR]

Duvernay shale is a world class shale deposit with a total resource of 440 billion barrels oil equivalent in the Western Canada Sedimentary Basin (WCSB). The volatile oil recovery factors achieved from primary production are much lower than those from the gas-condensate window, typically 5–10% of original oil in place (OOIP). The previous study has indicated that huff-n-puff gas injection is one of the most promising enhanced oil recovery (EOR) methods in shale oil reservoirs. In this paper, we built a comprehensive numerical compositional model in combination with the embedded discrete fracture model (EDFM) method to evaluate geological and engineering controls on gas huff-n-puff in Duvernay shale volatile oil reservoirs. Multiple scenarios of compositional simulations of huff-n-puff gas injection for the proposed twelve parameters have been conducted and effects of reservoir, completion and depletion development parameters on huff-n-puff are evaluated. We concluded that fracture conductivity, natural fracture density, period of primary depletion, and natural fracture permeability are the most sensitive parameters for incremental oil recovery from gas huff-n-puff. Low fracture conductivity and a short period of primary depletion could significantly increase the gas usage ratio and result in poor economical efficiency of the gas huff-n-puff process. Sensitivity analysis indicates that due to the increase of the matrix-surface area during gas huff-n-puff process, natural fractures associated with hydraulic fractures are the key controlling factors for gas huff-n-puff in Duvernay shale oil reservoirs. The range for the oil recovery increase over the primary recovery for one gas huff-n-puff cycle (nearly 2300 days of production) in Duvernay shale volatile oil reservoir is between 0.23 and 0.87%. Finally, we proposed screening criteria for gas huff-n-puff potential areas in volatile oil reservoirs from Duvernay shale. This study is highly meaningful and can give valuable reference to practical works conducting the huff-n-puff gas injection in both Duvernay and other shale oil reservoirs. [ABSTRACT FROM AUTHOR]

This paper presents findings on mitigating the negative impact of renewable energy resources variability on the energy scheduling problem, in particular for island grids and microgrids. The methods and findings presented in this paper are twofold. First, data obtained from the City of Summerside in the province of Prince Edward Island, Canada, is leveraged to demonstrate the effectiveness of state-of-the-art time series predictors in mitigating energy scheduling inaccuracy. Second, the outcome of the time series prediction analysis is used to propose a novel data-driven battery energy storage system (BESS) sizing study for energy scheduling purposes. The proposed probabilistic method accounts for intra-interval variations of generation and demand, thus mitigating the trade-off between time resolution of the problem formulation and the solution accuracy. In addition, as part of the sizing study, a BESS management strategy is proposed to minimize energy scheduling inaccuracies, and is then used to obtain the optimal BESS size. Finally, the paper presents quantitative analyses of the impact of both the energy predictors and the BESS on the supplied energy cost using the actual data of the Summerside Electric grid. The paper reveals the significant potential for reducing energy cost in renewable-penetrated grids and microgrids through state-of-the-art predictors combined with applications of properly-sized energy storage systems. [ABSTRACT FROM AUTHOR]

Modern wide-bandgap (WBG) devices, such as silicon carbide (SiC) or gallium nitride (GaN) based devices, have emerged and been increasingly used in power electronics (PE) applications due to their superior switching feature. The power losses of these devices become the key of system efficiency improvement, especially for high-frequency applications. In this paper, a generalized behavioral model of a switch-diode cell (SDC) is proposed for power loss estimation in the electromagnetic transient simulation. The proposed model is developed based on the circuit level switching process analysis, which considers the effects of parasitics, the operating temperature, and the interaction of diode and switch. In addition, the transient waveforms of the SDC are simulated by the proposed model using dependent voltage and current sources with passive components. Besides, the approaches of obtaining model parameters from the datasheets are given and the modelling method is applicable to various semiconductors such Si insulated-gate bipolar transistor (IGBT), Si/SiC metal–oxide–semiconductor field-effect transistor (MOSFET), and GaN devices. Further, a multi-dimensional power loss table in a wide range of operating conditions can be obtained with fast speed and reasonable accuracy. The proposed approach is implemented in PSCAD/ Electromagnetic Transients including DC, EMTDC, (v4.6, Winnipeg, MB, Canada) and further verified by the hardware setups including different daughter boards for different devices. [ABSTRACT FROM AUTHOR]

High temperature superconducting (HTS) power cables are a potential solution for the grid integration of offshore wind farms since the HTS cable can conduct bulk wind power at low voltage levels. However, the transient current through the HTS cable in cases of low voltage ride through (LVRT) operation has a negative impact on the HTS cable operation due to the quenching phenomenon. This paper analyzes the impact of LVRT control strategies on the HTS cable operation. In addition, a coordinated control of wind turbines for LVRT improvement of an offshore wind farm is proposed. The feasibility of the HTS cable application for the grid connection of offshore wind farms is also discussed in this study. The proposed controller is designed for the wind turbine generator based on a type-4 permanent magnet synchronous generator. In the proposed controller, the transient current through the HTS cable is reduced by regulating the machine side power during fault conditions. The feasibility of the proposed controller is validated in the PSCAD/EMTDC program (Manitoba Hydro International Ltd., Winnipeg, Manitoba, Canada, version 4.2.1). The effects of transient current on the cable temperatures and resistances are analyzed in this study. Simulation results show that the proposed control strategy could reduce the transient current and temperature rise of the HTS cable. [ABSTRACT FROM AUTHOR]

In most cases, the benchmarking models of energy use in houses are developed based on current and past data, and they continue to be used without any update. This paper proposes the method of retraining of benchmarking models by applying machine learning techniques when new measurements are made available. The method uses as a case study the measurements of heating energy demand from two semi-detached houses of Northern Canada. The results of the prediction of heating energy demand using static or augmented window techniques are compared with measurements. The daily energy signature is used as a benchmarking model due to its simplicity and performance. However, the proposed retraining method can be applied to any form of benchmarking model. The method should be applied in all possible situations, and be an integral part of intelligent building automation and control systems (BACS) for the ongoing commissioning for building energy-related applications. [ABSTRACT FROM AUTHOR]

This paper proposes a new control scheme for the low frequency AC transmission (LFAC) system aiming at extending the point-to-point configuration to form a multi-terminal electrical energy network. The multi-terminal low frequency ac (MT-LFAC) system configuration is based on the use of modular multilevel matrix converters (M3Cs) and virtual synchronous generator (VSG) control. The M3C is the next ac/ac converter generation, which is used as an interface with the conventional AC network and the LFAC electrical energy system. Application of VSG control is proposed to enable proper power sharing, to provide synchronization of each terminal, and frequency stabilization, thus, to offer multiterminal forming capability. Two different operation modes are applied in the system to damp the frequency deviation after a dynamic perturbation, which provides additional stabilization feature to the VSG. Frequency restoration mode and commanded mode of power sharing are applied as dynamic states to validate the robustness of the VSG control system. Besides, to solve the negative impact of low X/R ratio in the LFAC electrical energy system, we enhance the VSG control by proposing a virtual-impedance-based solution, which increases the output total impedance on the low frequency side and prevents the coupling between P and Q. The operation of the proposed system is examined by simulation results with a precise model of M3Cs in the PSCAD/ EMTDC software environment (version 4.2.1, Winnipeg, MB, Canada). [ABSTRACT FROM AUTHOR]

Remote and isolated communities in Canada experience gaps in access to stable energy sources and must rely on diesel generators for heat and electricity. However, the cost and environmental impact resulting from the use of fossil fuels, especially in local energy production, heating, industrial processes and transportation are compelling reasons to support the development and deployment of renewable energy hybrid systems. This paper presents a computer model for economic analysis and risk assessment of a wind–diesel hybrid system with compressed air energy storage. The proposed model is developed from the point of view of the project investor and it includes technical, financial, risk and environmental analysis. Robustness is evaluated through sensitivity analysis. The model has been validated by comparing the results of a wind–diesel case study against those obtained using HOMER (National Renewable Energy Laboratory, Golden, CO, United States) and RETScreen (Natural Resources Canada, Government of Canada, Canada) software. The impact on economic performance of adding energy storage system in a wind–diesel hybrid system has been discussed. The obtained results demonstrate the feasibility of such hybrid system as a suitable power generator in terms of high net present value and internal rate of return, low cost of energy, as well as low risk assessment. In addition, the environmental impact is positive since less fuel is used. [ABSTRACT FROM AUTHOR]

This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]