Search

To enhance the accuracy of theft detection for electricity consumers, this paper introduces a novel strategy based on the fusion of the dual-time feature and deep learning methods. Initially, considering electricity-consumption features at dual temporal scales, the paper employs temporal convolutional networks (TCN) with a long short-term memory (LSTM) multi-level feature extraction module (LSTM-TCN) and deep convolutional neural network (DCNN) to parallelly extract features at these scales. Subsequently, the extracted features are coupled and input into a fully connected (FC) layer for classification, enabling the precise detection of theft users. To validate the method's effectiveness, real electricity-consumption data from the State Grid Corporation of China (SGCC) is used for testing. The experimental results demonstrate that the proposed method achieves a remarkable detection accuracy of up to 94.7% during testing, showcasing excellent performance across various evaluation metrics. Specifically, it attained values of 0.932, 0.964, 0.948, and 0.986 for precision, recall, F1 score, and AUC, respectively. Additionally, the paper conducts a comparative analysis with mainstream theft identification approaches. In the comparison of training processes, the proposed method exhibits significant advantages in terms of identification accuracy and fitting degree. Moreover, with adjustments to the training set proportions, the proposed method shows minimal impact, indicating robustness. [ABSTRACT FROM AUTHOR]

Accurately assessing the state of health (SOH) of lithium batteries is of great significance for improving battery safety performance. However, the current assessment for SOH suffers from the difficulty of selecting health features and the lack of uncertainty using data-driven methods. To this end, this paper proposes a health state assessment method for lithium-ion batteries based on health feature extraction and an improved Informer model. First, multiple features that can reflect the SOH of lithium-ion batteries were extracted from the charging and discharging time, the peak value of incremental capacity curve (ICC), and the inflection point value of differential voltage curve, etc., and the correlation between multiple health features and the health state was evaluated by gray correlation analysis. Then, an improved Informer model is proposed to establish a health state estimation method for lithium-ion batteries. Finally, the proposed algorithm is tested and validated using publicly available battery charge/discharge datasets and compared with other algorithms. The results show that the method in this paper can realize high-precision SOH prediction with a root-mean-square error (RMSE) of 0.011, and the model fit reaches more than 98%. [ABSTRACT FROM AUTHOR]

With a large proportion of wind farms connected to the power grid, it brings more pressure on the stable operation of power systems in shorter time scales. Efficient and accurate scheduling, operation control and decision making require high time resolution power forecasting algorithms with higher accuracy and real-time performance. In this paper, we innovatively propose a high temporal resolution wind power forecasting method based on a light convolutional architecture—DC_LCNN. The method starts from the source data and novelly designs the dual-channel data input mode to provide different combinations of feature data for the model, thus improving the upper limit of the learning ability of the whole model. The dual-channel convolutional neural network (CNN) structure extracts different spatial and temporal constraints of the input features. The light global maximum pooling method replaces the flat operation combined with the fully connected (FC) forecasting method in the traditional CNN, extracts the most significant features of the global method, and directly performs data downscaling at the same time, which significantly improves the forecasting accuracy and efficiency of the model. In this paper, the experiments are carried out on the 1 s resolution data of the actual wind field, and the single-step forecasting task with 1 s ahead of time and the multi-step forecasting task with 1~10 s ahead of time are executed, respectively. Comparing the experimental results with the classical deep learning models in the current field, the proposed model shows absolute accuracy advantages on both forecasting tasks. This also shows that the light architecture design based on simple deep learning models is also a good solution in performing high time resolution wind power forecasting tasks. [ABSTRACT FROM AUTHOR]

Wind energy, as a key link in renewable energy, has seen its penetration in the power grid increase in recent years. In this context, accurate and reliable short-term wind power prediction is particularly important for the real-time scheduling and operation of power systems. However, many deep learning-based methods rely on the relationship between wind speed and wind power to build a prediction model. These methods tend to consider only the temporal features and ignore the spatial and frequency domain features of the wind power variables, resulting in poor prediction accuracy. In addition to this, existing power forecasts for wind farms are often based on the wind farm level, without considering the impact of individual turbines on the wind power forecast. Therefore, this paper proposes a wind power prediction model based on multi-feature domain learning (MFDnet). Firstly, the model captures the similarity between turbines using the latitude, longitude and wind speed of the turbines, and constructs a turbine group with similar features as input based on the nearest neighbor algorithm. On this basis, the Seq2Seq framework is utilized to achieve weighted fusion with temporal and spatial features in multi-feature domains through high-frequency feature extraction by DWT. Finally, the validity of the model is verified with data from a wind farm in the U.S. The results show that the overall performance of the model outperforms other wind farm power prediction algorithms, and reduces MAE by 25.5% and RMSE by 20.6% compared to the baseline persistence model in predicting the next hour of wind power. [ABSTRACT FROM AUTHOR]

In this paper, the effect evaluation and production prediction of staged fracturing for horizontal wells in tight reservoirs are studied. Firstly, the basic characteristics and value of horizontal wells in tight reservoirs are introduced, their geological characteristics, flow mechanism and permeability model are analyzed and the application of grey theory in effect analysis is discussed. Considering the problems of staged fracturing effect evaluation and the production prediction of horizontal wells in tight reservoirs, a BP neural network model based on deep learning is proposed. Due to the interference of multiple physical parameters and the complex functional relationship in the development of tight reservoir fracturing, the traditional prediction method has low accuracy and it is difficult to establish an accurate mapping relationship. In this paper, a BP neural network is used to simulate multivariable nonlinear mapping by modifying the model, and its advantages in solving the coupling relationship of complex functions are brought into play. A neural network model with fracturing parameters as input and oil and gas production as output is designed. Through the training and testing of data sets, the accuracy and applicability of the proposed model for effect evaluation and yield prediction are verified. The research results show that the model can fit the complex mapping relationship between fracturing information and production and provide an effective evaluation and prediction tool for the development of the staged fracturing of horizontal wells in tight reservoirs. [ABSTRACT FROM AUTHOR]

Under the premise of ensuring the safe and stable operation of a wind–thermal–storage power system, this paper proposes an optimization model aimed at improving its overall economic efficiency and effectively reducing the peak-to-valley load difference. The model transforms the multi-objective optimization problem to solve a feasible interval of weight coefficients. We introduce a novel fusion model, where a Convolutional Neural Network (CNN) is melded with a Long Short-Term Memory Network (LSTM) to form the target network structure. Additionally, for datasets with limited samples, we incorporate a Self-Attention Mechanism (SAM) into the Model-Agnostic Meta-Learning (MAML). Ultimately, we build an MAML-SAM-CNN-LSTM network model to solve the interval of weight coefficients. An arithmetic validation of a modified IEEE 30-node system demonstrates that the MAML-SAM-CNN-LSTM network proposed in this paper can adeptly solve the feasible intervals of weight coefficients in the optimization model of the wind-thermal storage system. This is achieved under the constraints of the specified wind-thermal storage power system operation indexes. The evaluation indexes of the network model, including its accuracy, precision, recall, and F1 score, all exceed 98.72%, 98.57%, 98.30%, and 98.57%, respectively. This denotes a superior performance compared to the other three network models, offering an effective reference for optimizing decision-making and facilitating the enhanced realization of multi-objective, on-demand scheduling in the wind-thermal storage power system. [ABSTRACT FROM AUTHOR]

A large proportion of photovoltaic (PV) power generation is connected to the power grid, and its volatility and stochasticity have significant impacts on the power system. Accurate PV power forecasting is of great significance in optimizing the safe operation of the power grid and power market transactions. In this paper, a novel dual-channel PV power forecasting method based on a temporal convolutional network (TCN) is proposed. The method deeply integrates the PV station feature data with the model computing mechanism through the dual-channel model architecture; utilizes the combination of multihead attention (MHA) and TCN to extract the multidimensional spatio-temporal features between other meteorological variables and the PV power; and utilizes a single TCN to fully extract the temporal constraints of the power sequence elements. The weighted fusion of the dual-channel feature data ultimately yields the ideal forecasting results. The experimental data in this study are from a 26.52 kW PV power plant in central Australia. The experiments were carried out over seven different input window widths, and the two models that currently show superior performance within the field of PV power forecasting: the convolutional neural network (CNN), and the convolutional neural network combined with a long and short-term memory network (CNN_LSTM), are used as the baseline models. The experimental results show that the proposed model and the baseline models both obtained the best forecasting performance over a 1-day input window width, while the proposed model exhibited superior forecasting performance compared to the baseline model. It also shows that designing model architectures that deeply integrate the data input method with the model mechanism has research potential in the field of PV power forecasting. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative approach to Wind Turbine Blade (WTB) inspection through the synergistic use of thermal and RGB imaging, coupled with advanced deep learning techniques. We curated a unique dataset of 1000 thermal images of healthy and faulty blades using a FLIR C5 Compact Thermal Camera, which is equipped with Multi-Spectral Dynamic Imaging technology for enhanced imaging. This paper focuses on evaluating 35 deep learning classifiers, with a standout ensemble model combining Vision Transformer (ViT) and DenseNet161, achieving a remarkable 100% accuracy on the dataset. This model demonstrates the exceptional potential of deep learning in thermal diagnostic applications, particularly in predictive maintenance within the renewable energy sector. Our findings underscore the synergistic combination of ViT's global feature analysis and DenseNet161's dense connectivity, highlighting the importance of controlled environments and sophisticated preprocessing for accurate thermal image capture. This research contributes significantly to the field by providing a comprehensive dataset and demonstrating the efficacy of several deep learning models in ensuring the operational efficiency and reliability of wind turbines. [ABSTRACT FROM AUTHOR]

High-precision spatial-temporal wind power prediction technology is of great significance for ensuring the safe and stable operation of power grids. The development of artificial intelligence technology provides a new scheme for modeling with strong spatial-temporal correlation. In addition, the existing prediction models are mostly 'black box' models, lacking interpretability, which may lead to a lack of trust in the model by power grid dispatchers. Therefore, improving the model to obtain interpretability has become an important challenge. In this paper, an interpretable short-term wind power prediction model based on ensemble deep graph neural network is designed. Firstly, the graph network model (GNN) with an attention mechanism is applied to the aggregate and the spatial-temporal features of wind power data are extracted, and the interpretable ability is obtained. Then, the long short-term memory (LSTM) method is used to process the extracted features and establish a wind power prediction model. Finally, the random sampling algorithm is used to optimize the hyperparameters to improve the learning rate and performance of the model. Through multiple comparative experiments and a case analysis, the results show that the proposed model has a higher prediction accuracy than other traditional models and obtains reasonable interpretability in time and space dimensions. [ABSTRACT FROM AUTHOR]

With the rapid development of artificial intelligence (AI), AI has been widely applied in anomaly analysis detection and fault location in power grid data and has made significant research progress. Through looking back on traditional methods and deep learning methods in anomaly analysis detection and fault location of power grid data, we aim to provide readers with a comprehensive understanding of the existing knowledge and research advancements in this field. Firstly, we introduce the importance of anomaly analysis detection and fault location in power grid data for the safety and stability of power system operations and review traditional methods for anomaly analysis detection and fault location in power grid data, analyzing their advantages and disadvantages. Next, the paper briefly introduces the concepts of commonly used deep learning models in this field and explores, in depth, the application of deep learning methods in anomaly analysis detection and fault location of power grid data, summarizes the current research progress, and highlights the advantages of deep learning over traditional methods. Finally, we summarize the current issues and challenges faced by deep learning in this field and provide an outlook on future research direction. [ABSTRACT FROM AUTHOR]

The global transportation system's need for electrification is driving research efforts to overcome the drawbacks of battery electric vehicles (BEVs). The accurate and reliable estimation of the states of charge (SOC) and health (SOH) of Li-Ion batteries (LIBs) is crucial for the widespread adoption of BEVs. Transformers, cutting-edge deep learning (DL) models, are demonstrating promising capabilities in addressing various sequence-processing problems. This manuscript presents a thorough survey study of previous research papers that introduced modifications in the development of Transformer-based architectures for the SOC and SOH estimation of LIBs. This study also highlights approximately 15 different real-world datasets that have been utilized for training and testing these models. A comparison is made between the architectures, addressing each state using the root mean square error (RMSE) and mean absolute error (MAE) metrics. [ABSTRACT FROM AUTHOR]

The efficient and accurate calculation of neutron flux distribution is essential for evaluating the safety of nuclear facilities and the surrounding environment. While traditional numerical simulation methods such as the discrete ordinates (SN) method and Monte Carlo method have demonstrated excellent performance in terms of accuracy, their complex solving process incurs significant computational costs. This paper explores a data-driven and efficient method for obtaining neutron flux distribution based on deep learning, specifically targeting shielding problems with constant geometry and varying material cross-sections in practical engineering. The proposed method bypasses the intricate numerical transport calculation process of the discrete ordinates method by constructing a surrogate model that captures the correlation between transport characteristics and neutron flux from data characteristics. Simulations were carried out using Kobayashi-1 and Kobayashi-2 geometric models for shielding problems with constant geometry and varying material cross-sections. A series of validations have proved that the data-driven surrogate model demonstrates high generalization ability and reliability, while reducing the time required to obtain neutron flux distribution to 0.1 s without compromising on calculation accuracy compared to the discrete ordinates method. [ABSTRACT FROM AUTHOR]

In recent years, the State Grid of China has placed significant emphasis on the monitoring of noise in substations, driven by growing environmental concerns. This paper presents a substation noise monitoring system designed based on an end-network-cloud architecture, aiming to acquire and analyze substation noise, and report anomalous noise levels that exceed national standards for substation operation and maintenance. To collect real-time noise data at substations, a self-developed noise acquisition device is developed, enabling precise analysis of acoustic characteristics. Moreover, to subtract the interfering environmental background noise (bird/insect chirping, human voice, etc.) and determine if noise exceedances are originating from substation equipment, an intelligent noise separation algorithm is proposed by leveraging the convolutional time-domain audio separation network (Conv-TasNet), dual-path recurrent neural network (DPRNN), and dual-path transformer network (DPTNet), respectively, and evaluated under various scenarios. Experimental results show that (1) deep-learning-based separation algorithms outperform the traditional spectral subtraction method, where the signal-to-distortion ratio improvement (SDRi) and the scale-invariant signal-to-noise ratio improvement (SI-SNRi) of Conv-TasNet, DPRNN, DPTNet and the traditional spectral subtraction are 12.6 and 11.8, 13.6 and 12.4, 14.2 and 12.9, and 4.6 and 4.1, respectively; (2) DPTNet and DPRNN exhibit superior performance in environment noise separation and substation equipment noise separation, respectively; and (3) 91% of post-separation data maintains sound pressure level deviations within 1 dB, showcasing the effectiveness of the proposed algorithm in separating interfering noises while preserving the accuracy of substation noise sound pressure levels. [ABSTRACT FROM AUTHOR]

For the advancement of smart grids, solar power generation predictions have become an important research topic. In the case of using traditional modeling methods, excessive computational costs may be incurred and it is difficult for these methods to learn the multi-variable dependencies of the data. Therefore, in this paper, a deep learning model was used to combine convolutional neural networks and long short-term memory recurrent network predictions. This method enables hourly power generation one day into the future. Convolutional neural networks are used to extract the features of multiple time series, while long short-term memory neural networks predict multivariate outcomes simultaneously. In order to obtain more accurate prediction results, we performed feature selection on meteorological features and combined the selected weather features to train the prediction model. We further distinguished sunny- and rainy-day models according to the predicted daily rainfall conditions. In the experiment, it was shown that the method of combining meteorological features further reduced the error. Finally, taking into account the differences in climate conditions between the northern and southern regions of Taiwan, the experimental results of case studies involving multiple regions were evaluated to verify the proposed method. The results showed that training combined with selected meteorological features can be widely used in regions with different climates in Taiwan. [ABSTRACT FROM AUTHOR]

The LSTM neural network is often employed for time-series data prediction due to its strong nonlinear mapping capability and memory effect, allowing for better identification of complex data characteristics. However, the large computational workload required by neural networks can result in longer prediction times, making deployment on time-sensitive embedded devices challenging. To address this, TensorRT, a software development kit for NVIDIA hardware platforms, offers optimized network structures and reduced inference times for deep learning inference applications. Though TensorRT inference is GPU-based like other deep learning frameworks, TensorRT outperforms comparable frameworks in terms of inference speed. In this paper, we compare the inference time consumption and prediction deviation of various approaches on CPU, GPU, and TensorRT, while also exploring the effects of different quantization approaches. Our experiments demonstrate the accuracy and inference latency of the same model on the FPGA development board PYNQ-Z1 as well, though the best results were obtained using NVIDIA Jetson Xavier NX. The results show an approximately 50× improvement in inference speed compared to our previous technique, with only a 0.2% increase in Mean Absolute Percentage Error (MAPE). These works highlight the effectiveness and efficiency of TensorRT in reducing inference times, making it an excellent choice for time-sensitive embedded device deployments that require high precision and low latency. [ABSTRACT FROM AUTHOR]

Day-ahead electricity price forecasting (DAEPF) holds critical significance for stakeholders in energy markets, particularly in areas with large amounts of renewable energy sources (RES) integration. In Japan, the proliferation of RES has led to instances wherein day-ahead electricity prices drop to nearly zero JPY/kWh during peak RES production periods, substantially affecting transactions between electricity retailers and consumers. This paper introduces an innovative DAEPF framework employing a Convolutional Neural Network–Long Short-Term Memory (CNN–LSTM) model designed to predict day-ahead electricity prices in the Kyushu area of Japan. To mitigate the inherent uncertainties associated with neural networks, a novel ensemble learning approach is implemented to bolster the DAEPF model's robustness and prediction accuracy. The CNN–LSTM model is verified to outperform a standalone LSTM model in both prediction accuracy and computation time. Additionally, applying a natural logarithm transformation to the target day-ahead electricity price as a pre-processing technique has proven necessary for higher prediction accuracy. A novel "policy-versus-policy" strategy is proposed to address the prediction problem of the zero prices, halving the computation time of the traditional two-stage method. The efficacy of incorporating a suite of multimodal features: areal day-ahead electricity price, day-ahead system electricity price, areal actual power generation, areal meteorological forecasts, calendar forecasts, alongside the rolling features of areal day-ahead electricity price, as explanatory variables to significantly enhance DAEPF accuracy has been validated. With the full integration of the proposed features, the CNN–LSTM ensemble model achieves its highest accuracy, reaching performance metrics of R 2 , MAE, and RMSE of 0.787, 1.936 JPY/kWh, and 2.630 JPY/kWh, respectively, during the test range from 1 March 2023 to 31 March 2023, underscoring the advantages of a comprehensive, multi-dimensional approach to DAEPF. [ABSTRACT FROM AUTHOR]

The virtual synchronous generator (VSG) is an important concept and primary control method in modern power systems. The penetration of power-electronics-based distributed generators in the power grid provides uncertainty and reduces the inertia of the system, thus increasing the risk of instability when disturbance occurs. The VSG produces virtual inertia by introducing the dynamic characteristics of the synchronous generator, which provides inertia and becomes a grid-forming control method. The disadvantages of the VSG are that there are many parameters to be adjusted and its operation process is complicated. However, with the rapid development of artificial intelligence (AI) technology, the powerful adaptive learning capability of AI algorithms provides potential solutions to this issue. Two research hotspots are deep learning (DL) and reinforcement learning (RL). This paper presents a comprehensive review of these two techniques combined with VSG control in the energy internet (EI). Firstly, the basic principle and classification of the VSG are introduced. Next, the development of DL and RL algorithms is briefly reviewed. Then, recent research on VSG control based on DL and RL algorithms are summarized. Finally, some main challenges and study trends are discussed. [ABSTRACT FROM AUTHOR]

Microgrids (MGs) have evolved as critical components of modern energy distribution networks, providing increased dependability, efficiency, and sustainability. Effective control strategies are essential for optimizing MG operation and maintaining stability in the face of changing environmental and load conditions. Traditional rule-based control systems are extensively used due to their interpretability and simplicity. However, these strategies frequently lack the flexibility for complex and changing system dynamics. This paper provides a novel method called hybrid intelligent control for adaptive MG that integrates basic rule-based control and deep learning techniques, including gated recurrent units (GRUs), basic recurrent neural networks (RNNs), and long short-term memory (LSTM). The main target of this hybrid approach is to improve MG management performance by combining the strengths of basic rule-based systems and deep learning techniques. These deep learning techniques readily enhance and adapt control decisions based on historical data and domain-specific rules, leading to increasing system efficiency, stability, and resilience in adaptive MG. Our results show that the proposed method optimizes MG operation, especially under demanding conditions such as variable renewable energy supply and unanticipated load fluctuations. This study investigates special RNN architectures and hyperparameter optimization techniques with the aim of predicting power consumption and generation within the adaptive MG system. Our promising results show the highest-performing models indicating high accuracy and efficiency in power prediction. The finest-performing model accomplishes an R 2 value close to 1, representing a strong correlation between predicted and actual power values. Specifically, the best model achieved an R 2 value of 0.999809, an MSE of 0.000002, and an MAE of 0.000831. [ABSTRACT FROM AUTHOR]

Energy management systems allow the Smart Grids industry to track, improve, and regulate energy use. Particularly, demand-side management is regarded as a crucial component of the entire Smart Grids system. Therefore, by aligning utility offers with customer demand, anticipating future energy demands is essential for regulating consumption. An updated examination of several forecasting techniques for projecting energy short-term load forecasts is provided in this article. Each class of algorithms, including statistical techniques, Machine Learning, Deep Learning, and hybrid combinations, are comparatively evaluated and critically analyzed, based on three real consumption datasets from Spain, Germany, and the United States of America. To increase the size of tiny training datasets, this paper also proposes a data augmentation technique based on Generative Adversarial Networks. The results show that the Deep Learning-hybrid model is more accurate than traditional statistical methods and basic Machine Learning procedures. In the same direction, it is demonstrated that more comprehensive datasets assisted by complementary data, such as energy generation and weather, may significantly boost the accuracy of the models. Additionally, it is also demonstrated that Generative Adversarial Networks-based data augmentation may greatly improve algorithm accuracy. [ABSTRACT FROM AUTHOR]

Assessments of the hosting capacity of electricity distribution networks are of paramount importance, as they facilitate the seamless integration of rooftop photovoltaic systems into the grid, accelerating the transition towards a more carbon neutral and sustainable system. This paper employs a deep reinforcement learning-based approach to evaluate the real-time hosting capacity of low voltage distribution networks in a model-free manner. The proposed approach only requires real-time customer voltage data and solar irradiation data to provide a fast and accurate estimate of real-time hosting capacity at each customer connection point. This study addresses the imperative for accurate electrical models, which are frequently unavailable, in evaluating the hosting capacity of electricity distribution networks. To meet this challenge, the proposed approach utilizes a deep neural network-based, data-driven model of a low-voltage electricity distribution network. This proposed methodology incorporates model-free elements, enhancing its adaptability and robustness. In addition, a comparative analysis between model-based and model-free hosting capacity assessment methods is presented, highlighting their respective strengths and weaknesses. The utilization of the proposed hosting capacity estimation model enables distribution network service providers to make well-informed decisions regarding grid planning, leading to cost minimization. [ABSTRACT FROM AUTHOR]

Non-Intrusive Load Monitoring (NILM), which provides sufficient load for the energy consumption of an entire building, has become crucial in improving the operation of energy systems. Although NILM can decompose overall energy consumption into individual electrical sub-loads, it struggles to estimate thermal-driven sub-loads such as occupants. Previous studies proposed Non-Intrusive Thermal Load Monitoring (NITLM), which disaggregates the overall thermal load into sub-loads; however, these studies evaluated only a single building. The results change for other buildings due to individual building factors, such as floor area, location, and occupancy patterns; thus, it is necessary to analyze how these factors affect the accuracy of disaggregation for accurate monitoring. In this paper, we conduct a fundamental evaluation of NITLM in various realistic office buildings to accurately disaggregate the overall thermal load into sub-loads, focusing on occupant thermal load. Through experiments, we introduce NITLM with deep learning models and evaluate these models using thermal load datasets. These thermal load datasets are generated by a building energy simulation, and its inputs for the simulation were derived from realistic data like HVAC on/off data. Such fundamental evaluation has not been done before, but insights obtained from the comparison of learning models are necessary and useful for improving learning models. Our experimental results shed light on the deep learning-based NITLM models for building-level efficient energy management systems. [ABSTRACT FROM AUTHOR]

Accurate prediction of crude petroleum production in oil fields plays a crucial role in analyzing reservoir dynamics, formulating measures to increase production, and selecting ways to improve recovery factors. Current prediction methods mainly include reservoir engineering methods, numerical simulation methods, and deep learning methods, and the required prerequisite is a large amount of historical data. However, when the data used to train the model are insufficient, the prediction effect will be reduced dramatically. In this paper, a time series-related meta-learning (TsrML) method is proposed that can be applied to the prediction of petroleum time series containing small samples and can address the limitations of traditional deep learning methods for the few-shot problem, thereby supporting the development of production measures. The approach involves an architecture divided into meta-learner and base-learner, which learns initialization parameters from 89 time series datasets. It can be quickly adapted to achieve excellent and accurate predictions with small samples in the oil field. Three case studies were performed using time series from two actual oil fields. For objective evaluation, the proposed method is compared with several traditional methods. Compared to traditional deep learning methods, RMSE is decreased by 0.1766 on average, and MAPE is decreased by 4.8013 on average. The empirical results show that the proposed method outperforms the traditional deep learning methods. [ABSTRACT FROM AUTHOR]

Renewable energies have become pivotal in the global energy landscape. Their adoption is crucial for phasing out fossil fuels and promoting environmentally friendly energy solutions. In recent years, the energy management system (EMS) concept has emerged to manage the power grid. EMS optimizes electric grid operations through advanced metering, automation, and communication technologies. A critical component of EMS is power forecasting, which facilitates precise energy grid scheduling. This research paper introduces a deep learning hybrid model employing convolutional neural network–long short-term memory (CNN-LSTM) for short-term photovoltaic (PV) solar energy forecasting. The proposed method integrates the variational mode decomposition (VMD) algorithm with the CNN-LSTM model to predict PV power output from a solar farm in Boussada, Algeria, spanning 1 January 2019, to 31 December 2020. The performance of the developed model is benchmarked against other deep learning models across various time horizons (15, 30, and 60 min): variational mode decomposition–convolutional neural network (VMD-CNN), variational mode decomposition–long short-term memory (VMD-LSTM), and convolutional neural network–long short-term memory (CNN-LSTM), which provide a comprehensive evaluation. Our findings demonstrate that the developed model outperforms other methods, offering promising results in solar power forecasting. This research contributes to the primary goal of enhancing EMS by providing accurate solar energy forecasts. [ABSTRACT FROM AUTHOR]

The electricity market is constantly evolving, being driven by factors such as market liberalization, the increasing use of renewable energy sources (RESs), and various economic and political influences. These dynamics make it challenging to predict wholesale electricity prices. Accurate short-term forecasting is crucial to maintaining system balance and addressing anomalies such as negative prices and deviations from predictions. This paper investigates short-term electricity price forecasting using historical time series data and employs advanced deep learning algorithms. First, four deep learning models are implemented and proposed, which are a convolutional neural network (CNN) with an integrated attention mechanism, a hybrid CNN followed by a gated recurrent unit model (CNN-GRU) with an attention mechanism, and two ensemble learning models, which are a soft voting ensemble and a stacking ensemble model. Also, the optimized version of a transformer model, the Multi-Head Attention model, is introduced. Finally, the perceptron model is used as a benchmark for comparison. Our results show excellent prediction accuracy, particularly in the hybrid CNN-GRU model with attention, thereby achieving a mean absolute percentage error (MAPE) of 6.333%. The soft voting ensemble model and the Multi-Head Attention model also performed well, with MAPEs of 6.125% and 6.889%, respectively. These findings are significant, as previous studies have not shown high performance with transformer models and attention mechanisms. The presented results offer promising insights for future research in this field. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative framework for wind power prediction that focuses on the future of energy forecasting utilizing intelligent deep learning and strategic feature engineering. This research investigates the application of a state-of-the-art deep learning model for wind energy prediction to make extremely short-term forecasts using real-time data on wind generation from New South Wales, Australia. In contrast with typical approaches to wind energy forecasting, this model relies entirely on historical data and strategic feature engineering to make predictions, rather than relying on meteorological parameters. A hybrid feature engineering strategy that integrates features from several feature generation techniques to obtain the optimal input parameters is a significant contribution to this work. The model's performance is assessed using key metrics, yielding optimal results with a Mean Absolute Error (MAE) of 8.76, Mean Squared Error (MSE) of 139.49, Root Mean Squared Error (RMSE) of 11.81, R-squared score of 0.997, and Mean Absolute Percentage Error (MAPE) of 4.85%. Additionally, the proposed framework outperforms six other deep learning and hybrid deep learning models in terms of wind energy prediction accuracy. These findings highlight the importance of advanced data analysis for feature generation in data processing, pointing to its key role in boosting the precision of forecasting applications. [ABSTRACT FROM AUTHOR]

This research delineates a pivotal advancement in the domain of sustainable energy systems, with a focused emphasis on the integration of renewable energy sources—predominantly wind and solar power—into the hydrogen production paradigm. At the core of this scientific endeavor is the formulation and implementation of a deep-learning-based framework for short-term localized weather forecasting, specifically designed to enhance the efficiency of hydrogen production derived from renewable energy sources. The study presents a comprehensive evaluation of the efficacy of fully connected neural networks (FCNs) and convolutional neural networks (CNNs) within the realm of deep learning, aimed at refining the accuracy of renewable energy forecasts. These methodologies have demonstrated remarkable proficiency in navigating the inherent complexities and variabilities associated with renewable energy systems, thereby significantly improving the reliability and precision of predictions pertaining to energy output. The cornerstone of this investigation is the deployment of an artificial intelligence (AI)-driven weather forecasting system, which meticulously analyzes data procured from 25 distinct weather monitoring stations across Latvia. This system is specifically tailored to deliver short-term (1 h ahead) forecasts, employing a comprehensive sensor fusion approach to accurately predicting wind and solar power outputs. A major finding of this research is the achievement of a mean squared error (MSE) of 1.36 in the forecasting model, underscoring the potential of this approach in optimizing renewable energy utilization for hydrogen production. Furthermore, the paper elucidates the construction of the forecasting model, revealing that the integration of sensor fusion significantly enhances the model's predictive capabilities by leveraging data from multiple sources to generate a more accurate and robust forecast. The entire codebase developed during this research endeavor has been made available on an open access GIT server. [ABSTRACT FROM AUTHOR]

This paper proposes a long short-term memory (LSTM) network to predict the power degradation of proton exchange membrane fuel cells (PEMFCs), and in order to promote the performance of the LSTM network, the ant colony algorithm (ACO) is introduced to optimize the hyperparameters of the LSTM network. First, the degradation mechanism of PEMFCs is analyzed. Second, the ACO algorithm is used to set the learning rate and dropout probability of the LSTM network combined with partial aging data, which can show the characteristics of the dataset. After that, the aging prediction model is built by using the LSTM and ACO (ACO-LSTM) method. Moreover, the convergence of the method is verified with previous studies. Finally, the fuel cell aging data provided by the Xiangyang Da'an Automotive Testing Center are used for verification. The results show that, compared with the traditional LSTM network, ACO-LSTM can predict the aging process of PEMFCs more accurately, and its prediction accuracy is improved by about 35%, especially when the training data are less. At the same time, the performance of the model trained by ACO-LSTM is also excellent under other operating conditions of the same fuel cell, and it has strong versatility. [ABSTRACT FROM AUTHOR]

The reliability and stability of differential protection in power transformers could be threatened by several types of inferences, including magnetizing inrush currents, current transformer saturation, and overexcitation from external faults. The robustness of deep learning applications employed for power system protection in recent years has offered solutions to deal with several disturbances. This paper presents a method for detecting internal faults in power transformers occurring simultaneously with inrush currents. It involves utilizing a data window (DW) and stacked denoising autoencoders. Unlike the conventional method, the proposed scheme requires no thresholds to discriminate internal faults and inrush currents. The performance of the algorithm was verified using fault data from a typical Korean 154 kV distribution substation. Inrush current variation and internal faults were simulated and generated in PSCAD/EMTDC, considering various parameters that affect an inrush current. The results indicate that the proposed scheme can detect the appearance of internal faults occurring simultaneously with an inrush current. Moreover, it shows promising results compared to the prevailing methods, ensuring the superiority of the proposed method. From sample N–3, the proposed DNN demonstrates accurate discrimination between internal faults and inrush currents, achieving accuracy, sensitivity, and precision values of 100%. [ABSTRACT FROM AUTHOR]

Deep learning (DL) networks are a popular choice for short-term load forecasting (STLF) in the residential sector. Hybrid DL methodologies based on convolutional neural networks (CNNs) and long short-term memory networks (LSTMs) have a higher forecasting accuracy than conventional statistical STLF techniques for different types of single-household load series. However, existing load forecasting methodologies are often inefficient when a high load demand persists for a few hours in a day. Peak load consumption is explicitly depicted as a tail in the probability distribution function (PDF) of the load series. Due to the diverse and uncertain nature of peak load demands, DL methodologies have difficulty maintaining consistent forecasting results, particularly when the PDF of the load series has a longer tail. This paper proposes a multihousehold load forecasting strategy based on the collective moment measure (CMM) (which is obtained from the PDF of the load series), data augmentation, and a CNN. Each load series was compared and ordered through CMM indexing, which helped maintain a minimum or constant shifting variance in the dataset inputted to the CNN. Data augmentation was used to enlarge the input dataset and solve the existing data requirement issues of the CNN. With the ordered load series and data augmentation strategy, the simulation results demonstrated a significant improvement in the performance of both single-household and multihousehold load forecasting. The proposed method predicts day-ahead multihousehold loads simultaneously and compares the results based on a single household. The forecasting performance of the proposed method for six different household groups with 10, 20, 30, 50, 80, and 100 household load series was evaluated and compared with those of existing methodologies. The mean absolute percentage error of the prediction results for each multihousehold load series could be improved by more than 3%. This study can help advance the application of DL methods for household load prediction under high-load-demand conditions. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power generation forecasting is an important research topic, aiming to mitigate variability caused by weather conditions and improve power generation planning. Climate factors, including solar irradiance, temperature, and cloud cover, influence the energy conversion achieved by PV systems. Long-term weather forecasting improves PV power generation planning, while short-term forecasting enhances control methods, such as managing ramp rates. The stochastic nature of weather variables poses a challenge for linear regression methods. Consequently, advanced, state-of-the-art machine learning (ML) approaches capable of handling non-linear data, such as long short-term memory (LSTM), have emerged. This paper introduces the implementation of a multivariate machine learning model to forecast PV power generation, considering multiple weather variables. A deep learning solution was implemented to analyze weather variables in a short time horizon. Utilizing a hidden Markov model for data preprocessing, an LSTM model was trained using the Alice Spring dataset provided by DKA Solar Center. The proposed workflow demonstrated superior performance compared to the results obtained by state-of-the-art methods, including support vector machine, radiation classification coordinate with LSTM (RCC-LSTM), and ESNCNN specifically concerning the proposed multi-input single-output LSTM model. This improvement is attributed to incorporating input features such as active power, temperature, humidity, horizontal and diffuse irradiance, and wind direction, with active power serving as the output variable. The proposed workflow achieved a mean square error (MSE) of 2.17 × 10 − 7 , a root mean square error (RMSE) of 4.65 × 10 − 4 , and a mean absolute error (MAE) of 4.04 × 10 − 4 . [ABSTRACT FROM AUTHOR]

The transient responses of distributed energy resources (DERs) in a microgrid are dynamically correlated in spatial and temporal dimensions. Hence, the transient stability prediction in microgrids would require an effective modeling of time-varying correlations and the mining of spatial–temporal features of electrical data. This paper proposes a refined DER-level transient stability prediction method for microgrids considering the time-varying spatial–temporal correlations of DERs. First, the spatial–temporal dynamic correlation of DERs was extracted and modeled by an attention-based mechanism. Then, a spatial–temporal graph convolution network was proposed to predict the dynamics of unstable DERs and the instability severity trend in a microgrid. The TSP model consisted of three parts: (1) several stacked spatial–temporal convolution modules to simultaneously mine the spatial–temporal dynamic features of microgrids, (2) an unstable DER identification module to predict the microgrid system stability and identify unstable DERs, and (3) an instability severity trend prediction module for DERs in a microgrid. The test results on a realistic 16-bus 10-DER microgrid demonstrated that the proposed prediction method possessed the desirable reliability and interpretability and outperformed the state-of-the-art baselines in unstable DER identifications and DER instability severity trend predictions. [ABSTRACT FROM AUTHOR]

In nuclear power plants, the loss-of-coolant accident (LOCA) stands out as the most prevalent and consequential incident. Accurate breach size diagnosis is crucial for the mitigation of LOCAs, and identifying the cause of an accident can prevent catastrophic consequences. Traditional methods mostly focus on combining model algorithms and utilize intricate composite model neural network architectures. However, it is crucial to investigate whether greater complexity necessarily leads to better performance. In addition, the consideration of the impact of dataset construction and data preprocessing on model performance is also needed for model building. This paper proposes a framework named DeepLOCA-Lattice to experiment with different preprocessing approaches to fundamental deep learning models for a comprehensive analysis of the diagnosis of LOCA breach size. The DeepLOCA-Lattice involves data preprocessing via the lattice algorithm and equal-interval partitioning and deep-learning-based models, including the multi-layer perceptron (MLP), recurrent neural networks (RNNs), convolutional neural networks (CNNs), and the transformer model in LOCA breach size diagnosis. After conducting rigorous ablation experiments, we have discovered that even rudimentary foundational models can achieve accuracy rates that exceed 90%. This is a significant improvement when compared to the previous models, which yield an accuracy rate of lower than 50%. The results interestingly demonstrate the superior performance and efficacy of the fundamental deep learning model, with an effective dataset construction approach. It elucidates the presence of a complex interplay among diagnostic scales, sliding window size, and sliding stride. Furthermore, our investigation reveals that the model attains its highest accuracy within the discussed range when utilizing a smaller sliding stride size and a longer sliding window length. This study could furnish valuable insights for constructing models for LOCA breach size estimation. [ABSTRACT FROM AUTHOR]

Raw material inventory control is indispensable for ensuring the cost reduction and efficiency of enterprises. Silica powder is an essential raw material for new energy enterprises. The inventory control of silicon powder is of great concern to enterprises, but due to the complexity of the market environment and the inadequacy of information technology, inventory control of silica powder has been ineffective. One of the most significant reasons for this is that existing methods encounter difficulty in effectively extracting the local and long-term characteristics of the data, which leads to significant errors in forecasting and poor accuracy. This study focuses on improving the accuracy of corporate inventory forecasting. We propose an improved CNN-BiLSTM-attention prediction model that uses convolutional neural networks (CNNs) to extract the local features from a dataset. The attention mechanism (attention) uses the point multiplication method to weigh the acquired features and the bidirectional long short-term memory (BiLSTM) network to acquire the long-term features of the dataset. The final output of the model is the predicted value of silica powder and the evaluation metrics. The proposed model is compared with five other models: CNN, LSTM, CNN-LSTM, CNN-BiLSTM, and CNN-LSTM-attention. The experiments show that the improved CNN-BiLSTM-attention prediction model can predict inbound and outbound silica powder very well. The accuracy of the prediction of the inbound test set is higher than that of the other five models by 7.429%, 11.813%, 15.365%, 10.331%, and 5.821%, respectively. The accuracy of the outbound storage prediction is higher than that of the other five models by 14.535%, 15.135%, 1.603%, 7.584%, and 18.784%, respectively. [ABSTRACT FROM AUTHOR]

Energy management strategy (EMS), as a core technology in fuel cell vehicles (FCVs), profoundly influences the lifespan of fuel cells and the economy of the vehicle. Aiming at the problem of the EMS of FCVs based on a global optimization algorithm not being applicable in real-time, a rule extraction-based EMS is proposed for fuel cell commercial vehicles. Based on the results of the dynamic programming (DP) algorithm in the CLTC-C cycle, the deep learning approach is employed to extract output power rules for fuel cell, leading to the establishment of a rule library. Using this library, a real-time applicable rule-based EMS is designed. The simulated driving platform is built in a CARLA, SUMO, and MATLAB/Simulink joint simulation environment. Simulation results indicate that the proposed strategy yields savings ranging from 3.64% to 8.96% in total costs when compared to the state machine-based strategy. [ABSTRACT FROM AUTHOR]

Metering anomalies not only mean huge economic losses but also indicate the faults of equipment and power lines, especially within the substation. As a result, metering anomaly diagnosis is becoming one of the most important missions in smart grids. However, due to the insufficient and imbalanced anomaly cases, identifying the anomalies in smart meter data accurately and efficiently remains challenging. Existing methods usually employ few-shot learning models in computer vision directly, which requires the rich experience of human experts and sufficient abnormal cases for training. It blocks model generalizing to various application scenarios. To address these shortcomings, we propose a novel framework for metering anomaly diagnosis based on few-shot learning, named FSMAD. Firstly, we design a fault data injection model to emulate anomalies, so that no abnormal samples are required in the training phase. Secondly, we provide a learnable variable transformation to reveal inherent relationships among various smart meter data and help FSMAD extract more efficient features. Finally, the deeper metric network is equipped to support FSMAD in obtaining powerful comparison capability. Extensive experiments on a real-world dataset demonstrate the advantages of our FSMAD over state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This research investigates the potential of using bedded salt formations for underground hydrogen storage. We present a novel artificial intelligence framework that employs spatial data analysis and multi-criteria decision-making to pinpoint the most appropriate sites for hydrogen storage in salt caverns. This methodology incorporates a comprehensive platform enhanced by a deep learning algorithm, specifically a convolutional neural network (CNN), to generate suitability maps for rock salt deposits for hydrogen storage. The efficacy of the CNN algorithm was assessed using metrics such as Mean Absolute Error (MAE), Mean Squared Error (MSE), Root Mean Square Error (RMSE), and the Correlation Coefficient (R2), with comparisons made to a real-world dataset. The CNN model showed outstanding performance, with an R2 of 0.96, MSE of 1.97, MAE of 1.003, and RMSE of 1.4. This novel approach leverages advanced deep learning techniques to offer a unique framework for assessing the viability of underground hydrogen storage. It presents a significant advancement in the field, offering valuable insights for a wide range of stakeholders and facilitating the identification of ideal sites for hydrogen storage facilities, thereby supporting informed decision-making and sustainable energy infrastructure development. [ABSTRACT FROM AUTHOR]

Wind–solar towers are a relatively new method of capturing renewable energy from solar and wind power. Solar radiation is collected and heated air is forced to move through the tower. The thermal updraft propels a wind turbine to generate electricity. Furthermore, the top of the tower's vortex generators produces a pressure differential, which intensifies the updraft. Data were gathered from a wind–solar tower system prototype developed and established at Kyushu University in Japan. Aiming to predict the power output of the system, while knowing a set of features, the data were evaluated and utilized to build a regression model. Sensitivity analysis guided the feature selection process. Several machine learning models were utilized in this study, and the most appropriate model was chosen based on prediction quality and temporal criteria. We started with a simple linear regression model but it was inaccurate. By adding some non-linearity through using polynomial regression of the second order, the accuracy increased considerably sufficiently. Moreover, deep neural networks were trained and tested to enhance the power prediction performance. These networks performed very well, having the most powerful prediction capabilities, with a coefficient of determination R 2 = 0.99734 after hyper-parameter tuning. A 1-D convolutional neural network achieved less accuracy with R 2 = 0.99647 , but is still considered a competitive model. A reduced model was introduced trading off some accuracy ( R 2 = 0.9916 ) for significantly reduced data collection requirements and effort. [ABSTRACT FROM AUTHOR]

Off-road machinery is one of the significant contributors to air pollution due to its large quantity. In this study, a deep learning model was developed to predict the transient engine emissions of CO, NO, NO2, and NOx, which are the main pollutants emitted by off-road machinery. A portable emission measurement system (PEMS) was used to measure the exhaust emission features of four types of construction machinery. The raw PEMS data were preprocessed using data compensation, local linear regression, and normalization to ensure that the data could handle transient conditions. The proposed model utilizes the preprocessing PEMS data to estimate the CO, NO, NO2, and NOx emissions from off-road machinery using a recurrent neural network (RNN) based on a long short-term memory (LSTM) model. The experimental results show that the proposed method can effectively predict the emissions from off-road construction machinery under transient conditions and can be applied to controlling the emissions from off-road construction machinery. [ABSTRACT FROM AUTHOR]

The transition from internal combustion engine vehicles to electric vehicles (EVs) is gaining momentum due to their significant environmental and economic benefits. This study addresses the challenges of integrating renewable energy sources, particularly solar power, into EV charging infrastructures by using deep learning models to predict photovoltaic (PV) power generation and EV charging demand. The study determines the optimal battery energy storage capacity and charging schedule based on the prediction result and actual data. A dataset of a 15 kWp rooftop PV system and simulated EV charging data are used. The results show that simple RNNs are most effective at predicting PV power due to their adept handling of simple patterns, while bidirectional LSTMs excel at predicting EV charging demand by capturing complex dynamics. The study also identifies an optimal battery storage capacity that will balance the use of the grid and surplus solar power through strategic charging scheduling, thereby improving the sustainability and efficiency of solar energy in EV charging infrastructures. This research highlights the potential for integrating renewable energy sources with advanced energy storage solutions to support the growing electric vehicle infrastructure. [ABSTRACT FROM AUTHOR]

This study addresses the challenges faced by coal-fired power plants in adapting to energy fluctuations following the integration of renewable energy sources into the power grid. The flexible operation of thermal power plants has become a focal point in academic research. A numerical model of a coal-fired power plant was developed in this study using the Long Short-Term Memory (LSTM) algorithm and the Particle Swarm Optimization (PSO) algorithm based on actual operation data analysis. The combined PSO-LSTM approach improved the accuracy of the model by optimizing parameters. Validation of the model was performed using a Dymola physical simulation model, demonstrating that the PSO-LSTM coupled numerical model accurately simulates coal-fired power plant operations with a goodness of fit reaching 0.998. Overall system performance for comprehensively evaluating the rate and accuracy of unit operation is proposed. Furthermore, the model's capability to simulate the load variation process of automatic generation control (AGC) under different load command groups was assessed, aiding in optimizing the best load command group. Optimization experiments show that the performance index of output power is optimal within the experimental range when the set load starts and stops are the same and the power of load command γ = 1.8. Specifically, the 50–75% Turbine Heat Acceptance (THA) load rise process enhanced the overall system performance index by 55.1%, while the 75–50% THA load fall process improved the overall system performance index by 54.2%. These findings highlight the effectiveness of the PSO-LSTM approach in optimizing thermal power plant operations and enhancing system performance under varying load conditions. [ABSTRACT FROM AUTHOR]

With the surge in population growth, the demand for electricity has escalated, necessitating efficient solutions to enhance the reliability and security of electrical systems. Smart grids, functioning as self-sufficient systems, offer a promising avenue by facilitating bi-directional communication between producers and consumers. Ensuring the stability and predictability of smart grid operations is paramount to evaluating their efficacy and usability. Machine learning emerges as a crucial tool for decision-making amidst fluctuating consumer demand and power supplies, thereby bolstering the stability and reliability of smart grids. This study explores the performance of various machine learning classifiers in predicting the stability of smart grid systems. Utilizing a smart grid dataset obtained from the University of California's machine learning repository, classifiers such as logistic regression (LR), XGBoost, linear support vector machine (Linear SVM), and SVM with radial basis function (SVM-RBF) were evaluated. Evaluation metrics, including accuracy, precision, recall, and F1 score, were employed to assess classifier performance. The results demonstrate high accuracy across all models, with the Deep Neural Network (DNN) model achieving the highest accuracy of 99.5%. Additionally, LR, linear SVM, and SVM-RBF exhibited comparable accuracy levels of 98.9%, highlighting their efficacy in smart grid stability prediction. These findings underscore the utility of machine learning techniques in enhancing the reliability and efficiency of smart grid systems. [ABSTRACT FROM AUTHOR]

Battery state of health (SOH), which is a crucial parameter of the battery management system, reflects the rate of performance degradation and the aging level of lithium-ion batteries (LIBs) during operation. However, traditional machine learning models face challenges in accurately diagnosing battery SOH in complex application scenarios. Hence, we developed a deep learning framework for battery SOH estimation without prior knowledge of the degradation in battery capacity. Our framework incorporates a series of deep neural networks (DNNs) that utilize the direct current internal resistance (DCIR) feature to estimate the SOH. The correlation of the DCIR feature with the fade in capacity is quantified as strong under various conditions using Pearson correlation coefficients. We utilize the K-fold cross-validation method to select the hyperparameters in the DNN models and the optimal hyperparameter conditions compared with machine learning models with significant advantages and reliable prediction accuracies. The proposed algorithm is subjected to robustness validation, and the experimental results demonstrate that the model achieves reliable precision, with a mean absolute error (MAE) less than 0.768% and a root mean square error (RMSE) less than 1.185%, even when LIBs are subjected to varying application scenarios. Our study highlights the superiority and reliability of combining DNNs with DCIR features for battery SOH estimation. [ABSTRACT FROM AUTHOR]

Methane steam reforming is the foremost method for hydrogen production, and it has been studied through experiments and diverse computational models to enhance its energy efficiency. This study focuses on employing an artificial neural network as a model of the methane steam reforming process. The proposed data-driven model predicts the output mixture's composition based on reactor operating conditions, such as the temperature, steam-to-methane ratio, nitrogen-to-methane ratio, methane flow, and nickel catalyst mass. The network, a feedforward type, underwent training with a comprehensive dataset augmentation strategy that augments the primary experimental dataset through interpolation and theoretical simulations of the process, ensuring a robust model training phase. Additionally, it introduces weights to evaluate the relative significance of different data categories (experimental, interpolated, and theoretical) within the dataset. The optimal artificial neural network architecture was determined by evaluating various configurations, with the aim of minimizing the mean squared error (0.00022) and maximizing the Pearson correlation coefficient (0.97) and Spearman correlation coefficient (1.00). [ABSTRACT FROM AUTHOR]

Anomaly detection is the process of detecting unusual or unforeseen patterns or events in data. Many factors, such as malfunctioning hardware, malevolent activities, or modifications to the data's underlying distribution, might cause anomalies. One of the key factors in anomaly detection is balancing the trade-off between sensitivity and specificity. Balancing these trade-offs requires careful tuning of the anomaly detection algorithm and consideration of the specific domain and application. Deep learning techniques' applications, such as LSTMs (long short-term memory algorithms), which are autoencoders for detecting an anomaly, have garnered increasing attention in recent years. The main goal of this work was to develop an anomaly detection solution for an electrical machine using an LSTM-autoencoder deep learning model. The work focused on detecting anomalies in an electrical motor's variation vibrations in three axes: axial (X), radial (Y), and tangential (Z), which are indicative of potential faults or failures. The presented model is a combination of the two architectures; LSTM layers were added to the autoencoder in order to leverage the LSTM capacity for handling large amounts of temporal data. To prove the LSTM efficiency, we will create a regular autoencoder model using the Python programming language and the TensorFlow machine learning framework, and compare its performance with our main LSTM-based autoencoder model. The two models will be trained on the same database, and evaluated on three primary points: training time, loss function, and MSE anomalies. Based on the obtained results, it is clear that the LSTM-autoencoder shows significantly smaller loss values and MSE anomalies compared to the regular autoencoder. On the other hand, the regular autoencoder performs better than the LSTM, comparing the training time. It appears then, that the LSTM-autoencoder presents a superior performance although it was slower than the standard autoencoder due to the complexity of the added LSTM layers. [ABSTRACT FROM AUTHOR]

Wind energy is a renewable resource with abundant reserves, and its sustainable development and utilization are crucial. The components of wind turbines, particularly the blades and various surfaces, require meticulous defect detection and maintenance due to their significance. The operational status of wind turbine generators directly impacts the efficiency and safe operation of wind farms. Traditional surface defect detection methods for wind turbines often involve manual operations, which suffer from issues such as high subjectivity, elevated risks, low accuracy, and inefficiency. The emergence of computer vision technologies based on deep learning has provided a novel approach to surface defect detection in wind turbines. However, existing datasets designed for wind turbine surface defects exhibit overall category scarcity and an imbalance in samples between categories. The algorithms designed face challenges, with low detection rates for small samples. Hence, this study first constructs a benchmark dataset for wind turbine surface defects comprising seven categories that encompass all common surface defects. Simultaneously, a wind turbine surface defect detection algorithm based on improved YOLOv5 is designed. Initially, a multi-scale copy-paste data augmentation method is proposed, introducing scale factors to randomly resize the bounding boxes before copy-pasting. This alleviates sample imbalances and significantly enhances the algorithm's detection capabilities for targets of different sizes. Subsequently, a dynamic label assignment strategy based on the Hungarian algorithm is introduced that calculates the matching costs by weighing different losses, enhancing the network's ability to learn positive and negative samples. To address overfitting and misrecognition resulting from strong data augmentation, a two-stage progressive training method is proposed, aiding the model's natural convergence and improving generalization performance. Furthermore, a multi-scenario negative-sample-guided learning method is introduced that involves incorporating unlabeled background images from various scenarios into training, guiding the model to learn negative samples and reducing misrecognition. Finally, slicing-aided hyper inference is introduced, facilitating large-scale inference for wind turbine surface defects in actual industrial scenarios. The improved algorithm demonstrates a 3.1% increase in the mean average precision (mAP) on the custom dataset, achieving 95.7% accuracy in mAP_50 (the IoU threshold is half of the mAP). Notably, the mAPs for small, medium, and large targets increase by 18.6%, 16.4%, and 6.8%, respectively. The experimental results indicate that the enhanced algorithm exhibits high detection accuracy, providing a new and more efficient solution for the field of wind turbine surface defect detection. [ABSTRACT FROM AUTHOR]

Amidst an energy crisis stemming from increased energy costs and the looming threat of war, there has been a burgeoning interest in energy conservation and management worldwide. Industrial complexes constitute a significant portion of total energy consumption. Hence, reducing energy consumption in these complexes is imperative for energy preservation. Typically, factories within similar industries aggregate in industrial complexes and share similar energy utilities. However, they often fail to capitalize on this shared infrastructure efficiently. To address this issue, a network system employing a virtual utility plant has been proposed. This system enables proactive measures to counteract energy surplus or deficit through AI-based predictions, thereby maximizing energy efficiency. Nevertheless, deploying conventional server systems within factories poses considerable challenges. Therefore, leveraging edge devices, characterized by low power consumption, high efficiency, and minimal space requirements, proves highly advantageous. Consequently, this study focuses on constructing and employing data collection and AI systems to utilize edge devices as standalone systems in each factory. To optimize the AI system for low-performance edge devices, we employed the integration-learning AI modeling technique. Evaluation results demonstrate that the proposed system exhibits high stability and reliability. [ABSTRACT FROM AUTHOR]

Building energy consumption takes up over 30% of global final energy use and 26% of global energy-related emissions. In addition, building operations represent nearly 55% of global electricity consumption. The management of peak demand plays a crucial role in optimizing building electricity usage, consequently leading to a reduction in carbon footprint. Accurately forecasting peak demand in commercial buildings provides benefits to both the suppliers and consumers by enhancing efficiency in electricity production and minimizing energy waste. Precise predictions of energy peaks enable the implementation of proactive peak-shaving strategies, the effective scheduling of battery response, and an enhancement of smart grid management. The current research on peak demand for commercial buildings has shown a gap in addressing timestamps for peak consumption incidents. To bridge the gap, an Energy Peaks and Timestamping Prediction (EPTP) framework is proposed to not only identify the energy peaks, but to also accurately predict the timestamps associated with their occurrences. In this EPTP framework, energy consumption prediction is performed with a long short-term memory network followed by the timestamp prediction using a multilayer perceptron network. The proposed framework was validated through experiments utilizing real-world commercial supermarket data. This evaluation was performed in comparison to the commonly used block maxima approach for indexing. The 2-h hit rate saw an improvement from 21% when employing the block maxima approach to 52.6% with the proposed EPTP framework for the hourly resolution. Similarly, the hit rate increased from 65.3% to 86% for the 15-min resolution. In addition, the average minute deviation decreased from 120 min with the block maxima approach to 62 min with the proposed EPTP framework with high-resolution data. The framework demonstrates satisfactory results when applied to high-resolution data obtained from real-world commercial supermarket energy consumption. [ABSTRACT FROM AUTHOR]

Distribution System Operators (DSOs) and Aggregators benefit from novel energy forecasting (EF) approaches. Improved forecasting accuracy may make it easier to deal with energy imbalances between generation and consumption. It also helps operations such as Demand Response Management (DRM) in Smart Grid (SG) architectures. For utilities, companies, and consumers to manage energy resources effectively and make educated decisions about energy generation and consumption, EF is essential. For many applications, such as Energy Load Forecasting (ELF), Energy Generation Forecasting (EGF), and grid stability, accurate EF is crucial. The state of the art in EF is examined in this literature review, emphasising cutting-edge forecasting techniques and technologies and their significance for the energy industry. It gives an overview of statistical, Machine Learning (ML)-based, and Deep Learning (DL)-based methods and their ensembles that form the basis of EF. Various time-series forecasting techniques are explored, including sequence-to-sequence, recursive, and direct forecasting. Furthermore, evaluation criteria are reported, namely, relative and absolute metrics such as Mean Absolute Error (MAE), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Coefficient of Determination ( R 2 ), and Coefficient of Variation of the Root Mean Square Error (CVRMSE), as well as the Execution Time (ET), which are used to gauge prediction accuracy. Finally, an overall step-by-step standard methodology often utilised in EF problems is presented. [ABSTRACT FROM AUTHOR]

An On-Load Tap Changer (OLTC) that regulates transformer voltage is one of the most important and strategic components of a transformer. Detecting faults in this component at early stages is, therefore, crucial to prevent transformer outages. In recent years, Hydro Quebec initiated a project to monitor the OLTC's condition in power transformers using vibro-acoustic signals. A data acquisition system has been installed on real OLTCs, which has been continuously measuring their generated vibration signal envelopes over the past few years. In this work, the multivariate deep autoencoder, a reconstruction-based method for unsupervised anomaly detection, is employed to analyze the vibration signal envelopes generated by the OLTC and detect abnormal behaviors. The model is trained using a dataset obtained from the normal operating conditions of the transformer to learn patterns. Subsequently, kernel density estimation (KDE), a nonparametric method, is used to fit the reconstruction errors (regarding normal data) obtained from the trained model and to calculate the anomaly scores, along with the static threshold. Finally, anomalies are detected using a deep autoencoder, KDE, and a dynamic threshold. It should be noted that the input variables responsible for anomalies are also identified based on the value of the reconstruction error and standard deviation. The proposed method is applied to six different real datasets to detect anomalies using two distinct approaches: individually on each dataset and by comparing all six datasets. The results indicate that the proposed method can detect anomalies at an early stage. Also, three alarms, including ignorable anomalies, long-term changes, and significant alterations, were introduced to quantify the OLTC's condition. [ABSTRACT FROM AUTHOR]

The greenhouse effect formed by the massive emission of carbon dioxide has caused serious harm to the Earth's environment, in which the power sector constitutes one of the primary contributors to global greenhouse gas emissions. Reducing carbon emissions from electricity plays a pivotal role in minimizing greenhouse gas emissions and mitigating the ecological, economic, and social impacts of climate change, while carbon emission prediction provides a valuable point of reference for the formulation of policies to reduce carbon emissions from electricity. The article provides a detailed review of research results on deep learning-based carbon emission prediction. Firstly, the main neural networks applied in the domain of carbon emission forecasting at home and abroad, as well as the models combining other methods and neural networks, are introduced, and the main roles of different methods, when combined with neural networks, are discussed. Secondly, neural networks were used to predict electricity carbon emissions, and the performance of different models on carbon emissions was compared. Finally, the application of neural networks in the realm of the prediction of carbon emissions is summarized, and future research directions are discussed. The article provides a reference for researchers to understand the research dynamics and development trend of deep learning in the realm of electricity carbon emission forecasting. [ABSTRACT FROM AUTHOR]