Search

Studies related to oil and gas wells have attracted worldwide interest due to the increasing energy shortfall and the requirement of sustainable development and environmental protection. However, the state of oil and gas wells in terms of research characteristics, technological megatrends, article-produced patterns, leading study items, hot topics, and frontiers is unclear. This work is aimed at filling the research gaps by performing a comprehensive bibliometric analysis of 6197 articles related to oil and gas wells published between 1900 and 2021. VOSviewer and CiteSpace software were used as the main data analysis and visualization tools. The analysis shows that the annual variation of article numbers, interdisciplinary numbers, and cumulative citations followed exponential growth. Oil and gas well research has promoted the expansion of research fields such as engineering, energy and fuels, geology, environmental sciences and ecology, materials science, and chemistry. The top 10 influential studies mainly focused on shale gas extraction and its impact on the environment. More studies were produced by larger author teams and inter-institution collaborations. Elkatatny and Guo have greatly contributed to the application of artificial intelligence in oil and gas wells. The two most contributing institutions were the Southwest Petr Univ and China Univ Petr from China. The People's Republic of China, the US, and Canada were the countries with the most contributions to the development of oil and gas wells. The authoritative journal in engineering technology was J Petrol Sci Eng, in environment technology was Environ Sci Technol, in geology was Aapg Bull, and in materials was Cement Concrete Res. The keyword co-occurrence network cluster analysis indicated that oil well cement, new energy development, machine learning, hydraulic fracturing, and natural gas and oil wells are the predominant research topics. The research frontiers were oil extraction and its harmful components (1992–2016), oil and gas wells (1997–2016), porous media (2007–2016), and hydrogen and shale gas (2012–2021). This paper comprehensively and quantitatively analyzes all aspects of oil and gas well research for the first time and presents valuable information about active and authoritative research entities, cooperation patterns, technology trends, hotspots, and frontiers. Therefore, it can help governments, policymakers, related companies, and the scientific community understand the global progress in oil and gas well research and provide a reference for technology development and application. [ABSTRACT FROM AUTHOR]

With the continuous improvement of shale oil and gas recovery technologies and achievements, a large amount of geological information and data have been accumulated for the description of shale reservoirs, and it has become possible to use machine learning methods for "sweet spots" prediction in shale oil and gas areas. Taking the Duvernay shale oil and gas field in Canada as an example, this paper attempts to build recoverable shale oil and gas reserve prediction models using machine learning methods and geological and development big data, to predict the distribution of recoverable shale oil and gas reserves and provide a basis for well location deployment and engineering modifications. The research results of the machine learning model in this study are as follows: ① Three machine learning methods were applied to build a prediction model and random forest showed the best performance. The R2 values of the built recoverable shale oil and gas reserves prediction models are 0.7894 and 0.8210, respectively, with an accuracy that meets the requirements of production applications; ② The geological main controlling factors for recoverable shale oil and gas reserves in this area are organic matter maturity and total organic carbon (TOC), followed by porosity and effective thickness; the main controlling factor for engineering modifications is the total proppant volume, followed by total stages and horizontal lateral length; ③ The abundance of recoverable shale oil and gas reserves in the central part of the study area is predicted to be relatively high, which makes it a favorable area for future well location deployment. [ABSTRACT FROM AUTHOR]

Geothermal energy exploration, development, and research have been ongoing in Canada for several decades. The country's cold climate and the push to develop renewable energy sources have driven interest in geothermal energy. Despite this drive, regulatory complexities and competition with other relatively inexpensive energy sources with existing infrastructure have hindered development. As such, interest has grown and waned with changes in the energy economy over several decades, leaving many projects at a standstill. As of January 2023, there are currently no operational geothermal power projects in Canada. Many hot spring pool and spa complexes remain active, and Canada is a leading country in the installation of ground source heat pumps (GSHPs; also called geo-exchange systems). However, in the last decade, the interest in deep geothermal systems has renewed, with many new projects starting up across several provinces and territories. Moreover, projects that had shown limited progress for many years—such as Mount Meager in British Columbia—have begun to renew their development efforts. Research is also expanding within prominent research groups and universities. The areas of focus include both building upon previous studies (such as thermal gradients and the heat flow in sedimentary basins) and researching new methods and resources (such as GSHPs, closed-loop systems, integrated geothermal operations, and hybrid systems, including heat storage). The development is supported by federal, provincial, and territorial governments through grants and the development of regulatory frameworks. Although challenges still remain for Canada to develop its geothermal energy resources, several power, thermal, and co-production projects, ongoing research, funding, and regulatory acts are all moving forward to support geothermal development. This paper aims to study Canada's geothermal energy update in 2023 regarding the aspects mentioned above. [ABSTRACT FROM AUTHOR]

This paper presents the findings of fifteen energy audits conducted on industrial sites in Canada's Greater Toronto Area (GTA). The audits covered a range of industries including food processing, packaged goods, and finishing processes (powder-coating). The primary focus of the audits was to analyze the natural gas consumption and the performance of major-gas-consuming equipment. The audits identified natural-gas-consuming equipment that could be optimized to yield energy and operational cost savings and greenhouse gas (GHG) reduction opportunities. Food production plants' energy intensity ranges from 5.59 m3/ft2 to 17.73 m3/ft2. Therefore, there is a significant opportunity to improve energy consumption through better technology integration. The results of the audits indicate a trend of an increase in the percentage of non-productive consumption with non-productive time. The proposed energy-saving measures include reducing non-productive natural gas consumption, gas-fired equipment tune-up, optimizing boiler loads, and reducing oven exhaust by using variable frequency drives (VFDs). The findings of this study could be used to develop a demand-side management program specifically for small- and medium-sized industrial facilities in the Greater Toronto Area and other parts of Canada. [ABSTRACT FROM AUTHOR]

Global warming might be mitigated if emissions were interrupted through carbon capture technologies, as there is a significant amount of comprehensive studies on them. An outline of the main gaps and trends of a technology is critical for further development. In this context, this study provides an overview of calcium looping carbon capture processes that have proven their potential and commercial viability. A bibliometric analysis is conducted on both Scopus and Web of Science database by seeking the keywords "calcium looping", "co2 capture", and "fluidized bed" in titles, abstracts, and keywords. Word selection was based on a list of relevant papers on the topic. These items of data have been processed and analyzed based on the number of publications and citations by emphasizing recent publication evolution, journal influence, the use of specific keywords, and co-citation. Results reveal that the European Union (EU) leads the rankings on the topic, followed by Canada. Keyword choice might have affected the number of citations. Recent studies used limestone as a sorbent and a dual fluidized bed reactor with a calciner or resistance depending on its size. Most studies are focused on technology scale-up. Although scale-up seems to be a priority, multiple studies are designed to assess the effect of steam generation and SO 2 on the process. [ABSTRACT FROM AUTHOR]

Unconventional oil and gas formations are abundant, have become an increasingly important part of the global energy supply, and are attracting increasing attention from the industry. Predicting key reservoir properties plays a significant role in both geological science and subsurface engineering workflows. With the advent of horizontal well drilling and multiple-stage hydraulic fracturing, the Montney Shale formation is one of the most promising and productive shale plays in Canada. However, very few academic papers discuss its in situ stress, reservoir pressure, and permeability, which are essential for the development of the Montney Shale. The objective of this study is to analyze the geo-stress, the pore pressure, and several key reservoir properties by using diagnostic fracture injection test (DFIT) data from the Montney Shale. One horizontal well from the Wapiti field has been analyzed with a set of DFIT data, and its results show that the general pressure and Gdp/dG responses from Well-A indicate a signature of height recession/transverse storage. In the study, the Tangent Line method, the Compliance method, and the Variable Compliance method have been applied to estimate the key reservoir properties. As a result, the Well-A DFIT analysis estimates that the closure pressure is ranging from 34.367 to 39.344 MPa, contributing to the stress gradient from 14.09 to 16.13 KPa/m for the formation. The pore pressure is ranging from 20.82 to 24.58 MPa, contributing to the pore pressure gradient from 8.54 to 10.07 KPa/m for the formation. The porosity is ranging from 3% to 6%. These reservoir properties are contoured cross the Montney Shale formation. Using the DFIT's numerical simulation and history matching, the reservoir permeability is 0.024 md, fracture length is 13.44 m, and fracture geometries are analyzed by different models. Moreover, the physics behind the DFIT are analyzed and discussed in detail. For the first time, three different analysis methods have been applied to estimate a series of key reservoir properties for the case wells in the Montney Shale formation. This approach can not only reduce the potential prediction error caused by a single method application but also increase the persuasiveness of the assessment and save time, ensuring the efficient implementation of engineering operations. Given the significance of quantifying in situ stress and reservoir pore pressure in unconventional hydrocarbon exploration and development, this study could help the operator to quickly understand the stress regimes, the fracture geometry, and the formation properties of the Montney Shale formation in the Wapiti field. Furthermore, the interpreted results demonstrated in this paper are adding substantial business value to the asset, especially in terms of improving the hydraulic fracturing design and, thus, accelerating the cashflow from production. [ABSTRACT FROM AUTHOR]

Heating, ventilation, and air conditioning (HVAC) systems play a crucial role in either increasing or decreasing the risk of airborne disease transmission. High ventilation, for instance, is a common method used to control and reduce the infection risk of airborne diseases such as COVID-19. On the other hand, high ventilation will increase energy consumption and cost. This paper proposes an optimal HVAC controller to assess the trade-off between energy consumption and indoor infection risk of COVID-19. To achieve this goal, a nonlinear model predictive controller (NMPC) is designed to control the HVAC systems of a university building to minimize the risk of COVID-19 transmission while reducing building energy consumption. The NMPC controller uses dynamic models to predict future outputs while meeting system constraints. To this end, a set of dynamic physics-based models are created to capture heat transfer and conservation of mass, which are used in the NMPC controller. Then, the developed models are experimentally validated by conducting experiments in the ETLC building at the University of Alberta, Canada. A classroom in the building is equipped with a number of sensors to measure indoor and outdoor environmental parameters such as temperature, relative humidity, and CO 2 concentration. The validation results show that the model can predict room temperature and CO 2 concentration by 0.8%, and 2.4% mean absolute average errors, respectively. Based on the validated models, the NMPC controller is designed to calculate the optimal airflow and supply air temperature for every 15 min. The results for real case studies show that the NMPC controller can reduce the infection risk of COVID-19 transmission below 1% while reducing energy consumption by 55% when compared to the existing building controller. [ABSTRACT FROM AUTHOR]

Remote community initiatives for renewable energy are rapidly emerging across Canada but with varying numbers, success rates, and strategies. To meet low-carbon transition goals, the need to coordinate technology deployment and long-term policy to guide the adoption is critical. Renewable resources such as wind, solar, hydro, and biomass can provide energy at a subsidized cost, create sustainable infrastructure, and provide new economic viability in social value integration. The renewable energy transition is crucial to Canada in sustaining remote and indigenous communities by providing local, clean, and low-carbon-emission energy for heat, power, and possibly transportation. This paper identified 635 renewable resources projects deployed to improve and increase electricity supply. To an extent, balancing demand within the remote and indigenous communities of Canada and highlighting sustainable renewable energy development through ownership participation within the communities is achievable before 2050 and beyond through energy efficiency and the social value of energy. The article identifies clean energy targets as mandated by the different provinces in Canada to reach net-zero GHG emissions. [ABSTRACT FROM AUTHOR]

There is a large amount of drilling core data in the Mackay River oil sands block in Canada, and the accurate identification of facies from the cores is important and necessary for the understanding of the subsurface reservoir. The traditional recognition method of facies from cores is by human work and is very time consuming. Furthermore, the results are different according to different geologists because of the subjective judgment criterion. An efficient and objective method is important to solve the above problem. In this paper, the deep learning image-recognition algorithm is used to automatically and intelligently recognize the facies type from the core image. Through a series of high-reliability preprocessing operations, such as cropping, segmentation, rotation transformation, and noise removal of the original core image, that have been manually identified, the key feature information in the images is extracted based on the ResNet50 convolutional neural network. On the dataset of about 200 core images from 13 facies, an intelligent identification system of facies from core images is constructed, which realizes automatic facies identification from core images. Comparing this method with traditional convolutional neural networks and support vector machines (SVM), the results show that the recognition accuracy of this model is as high as 91.12%, which is higher than the other two models. It is also shown that for a relatively special dataset, such as core images, it is necessary to rely on their global features in order to classify them, and, with a large similarity between some of the categories, it is extremely difficult to classify them. The selection of a suitable neural network model can have a great impact on the accuracy of recognition results. Then, the recognized facies are input as hard data to construct the three-dimensional facies model, which reveals the complex heterogeneity and distribution of the subsurface reservoir for further exploration and development. [ABSTRACT FROM AUTHOR]

"Short-term load forecasting (STLF)" is increasingly significant because of the extensive use of distributed energy resources, the incorporation of intermitted RES, and the implementation of DSM. This paper provides a novel ensemble forecasting model with wavelet transform for the STLF depending on the decomposition principle of load profiles. The model can effectively capture the portion of daily load profiles caused by seasonal variations. The results indicate that it is possible to improve STLF accuracy with the proposed method. The proposed approach is tested with the data taken from Ontario's electricity market in Canada. The results show that the proposed technique performs well in-terms of prediction when compared to existing traditional and cutting-edge methods. The performance of the model was validated with different datasets. Moreover, this approach can provide accurate load forecasting using ensemble models. Therefore, utilities and smart grid operators can use this approach as an additional decision-making tool to improve their real-time decisions. [ABSTRACT FROM AUTHOR]

In Canada, many mines have adopted the sublevel stoping method, such a blasthole stoping (BHS), to extract steeply deposited minerals. Sill pillars are usually kept in place in this mining method to support the weight of the overburden in underground mining. To prolong the mine's life, sill pillars will be recovered, and sill pillar recovery could cause failures, fatality, and equipment loss in the stopes. In this paper, three sill pillar recovery schemes—SBS, SS1, and SS2—were proposed and conducted to assess the feasibility of recovering two sill pillars in a hard rock mine by developing a full-sized three-dimensional (3D) analysis model employing the finite element method (FEM). The numerical model was calibrated by comparing the model computed ground settlement with the in situ monitored ground settlement data. The rockburst tendency of the stope accesses caused by the sill pillar recovery was assessed by employing the tangential stress (Ts) criterion and burst potential index (BPI) criterion. All three proposed sill pillar recovery schemes were feasible and safe to recover the sill pillars in this hard rock mine, and the scheme SBS was the optimum one among the three schemes. [ABSTRACT FROM AUTHOR]

The ongoing COVID-19 pandemic has disrupted global economic activity in all sectors, including forest industries. Changes in demand for forest products in North America over the course of the pandemic have affected both primary processors and downstream industries reliant on residues, including wood pellet producers. Wood pellets have become an internationally traded good, mostly as a substitute for coal in electricity generation, with a significant proportion of the global supply coming from Canadian producers. To determine the effect of the COVID-19 pandemic on the Canadian wood pellet industry, economic and market data were evaluated, in parallel with a survey of Canadian manufacturers on their experiences during the first three waves of the pandemic (March 2020 to September 2021). Overall, the impact of the pandemic on the Canadian wood pellet industry was relatively small, as prices, exports, and production remained stable. Survey respondents noted some negative impacts, mostly in the first months of the pandemic, but the quick recovery of lumber production helped to reduce the impact on wood pellet producers and ensured a stable feedstock supply. The pandemic did exacerbate certain pre-existing issues, such as access to transportation services and labour availability, which were still a concern for the industry at the end of the third wave in Canada. These results suggest that the Canadian wood pellet industry was resilient to disruptions caused by the pandemic and was able to manage the negative effects it faced. This is likely because of the integrated nature of the forest sector, the industry's reliance on long-term supply contracts, and feedstock flexibility, in addition to producers and end-users both being providers of essential services. [ABSTRACT FROM AUTHOR]

The Government of Canada has embraced circular economy and is supporting an increasing number of initiatives in the field. However, implementation examples remain scattered and certain stakeholders are eager to see a greater level of commitment from policy makers. The purpose of this study is to provide a Canadian perspective on how, and to what extent, forest products are compatible with circular economy strategies. This topic was investigated through interviews with 16 Canadian experts in eco-design, circular economy, forest products and/or waste management, with a focus on construction and packaging. Efforts made by forest industries at the manufacturing stage to reduce resource consumption were acknowledged, but the implementation of other circular economy strategies, such as reuse, recycling and energy recovery, is uneven. While there is low-hanging fruit for incremental improvements, such as the processing of recovered lumber in wood panels and not mixing cardboard fibres with other paper streams to avoid downcycling, several barriers to the widespread adoption of the most promising strategies were identified. The experts consulted proposed several solutions to accelerate the deployment of circular economy strategies for forest products, for which government interventions would need to be tailored to the different policy readiness levels (PRLs) observed in the construction and packaging sectors. With circularity having economy-wide implications, setting a clear policy direction at the national level, with a circular economy roadmap for Canada for example, could accelerate coordinated implementation within and across sectors, including forest industries. [ABSTRACT FROM AUTHOR]

Canadian provinces are required to regulate their power sectors using carbon pricing systems that meet national minimum stringency standards, which are set by the federal government. A diverse set of systems has emerged as a result. However, there has been limited assessment of how different pricing mechanisms impact the evolution of Canada's electricity system. To address this gap, we use an electricity system planning model called COPPER and a scenario-based approach to assess if, and to what extent, different policy regimes impact power sector greenhouse gas emissions and costs. Our results show that carbon pricing systems currently in place lead to significant carbon reductions over the long term, provided that free emissions allocations are reduced. However, the cost-optimal pathway for the power sector differs across provinces depending on the carbon pricing mechanism. Some provinces achieve least-cost emissions reductions by switching from high-carbon technologies to renewables, while others are better served by replacing high-carbon technologies with low-carbon fossil fuel alternatives. Further, provinces that implement cap-and-trade systems may affect the transitions of interconnected jurisdictions. Power sector climate policy design should reflect the heterogeneity of available assets, resources, and neighbouring approaches. [ABSTRACT FROM AUTHOR]

Mining in Canada stands as one of the most energy-intensive sectors, playing a pivotal role as a significant provider of copper, nickel, and cobalt to the international market. Anticipated growth in the global population, coupled with the transition of several low-income economies to middle-income status, is poised to escalate the demand for essential raw materials. This surge in demand is expected to drive an increase in energy consumption across various stages of the Canadian mining industry, encompassing exploration, extraction, processing, and refining. Due to their geographical constraints, most Canadian mining operations rely heavily on fossil fuels such as diesel and heavy fuel. Considering the global shift towards decarbonization and the pursuit of net-zero emission targets, exploring avenues for adopting electrification solutions and integrating renewable energy technologies, particularly in sizable surface mines, is imperative. Within this context, our study delves into the challenges and prospects associated with infusing renewable energy technologies and embracing electrification alternatives within Canadian mining practices. This exploration encompasses a comprehensive review of pertinent literature comprising academic research, technical analyses, and data disseminated by international entities and experts. The findings underscore a prevalent trend wherein Canadian mining enterprises are prominently investing in robust electric truck fleets, particularly for heavy-duty operations. Additionally, incorporating renewable energy solutions is notably prevalent in remote sites with extended operational lifespans. However, an in-depth examination reveals that the most formidable hurdles encompass successfully integrating renewable energy sources and battery electric vehicles. Financial constraints, logistical intricacies, and the imperative to enhance research and development competencies emerge as pivotal challenges that demand strategic addressing. [ABSTRACT FROM AUTHOR]

With the implementation of new policies supporting renewable natural gas production from organic wastes, Canada began replacing traditional disposal methods with highly integrated biogas production strategies. Herein, data from published papers, Canadian Biogas Association, Canada's national statistical agency, and energy companies' websites were gathered to gain insight into the current status of anaerobic digestion plants in recovering energy and resource from organic wastes. The availability of materials prepared for recycling by companies and local waste management organizations and existing infrastructures for municipal solid waste management were examined. Governmental incentives and discouragements in Canada and world anaerobic digestion leaders regarding organic fraction municipal solid waste management were comprehensively reviewed to identify the opportunities for developing large-scale anaerobic digestion in Canada. A range of anaerobic digestion facilities, including water resource recovery facilities, standalone digesters, and on-farm digesters throughout Ontario, were compared in terms of digestion type, digester volume, feedstock (s), and electricity capacity to better understand the current role of biogas plants in this province. Finally, technology perspectives, solutions, and roadmaps were discussed to shape the future in terms of organic fraction municipal solid waste management. The findings suggested that the biogas industry growth in Canada relies on provincial energy and waste management policies, advanced technologies for diverting organic waste from landfills, improving biogas yield using existing pretreatment methods, and educating farmers regarding digester operations. [ABSTRACT FROM AUTHOR]

In remote communities of Canada, diesel is the primary source of electricity and heat. Promoting sustainable and diverse means of heat and power generation is essential to providing reliable and less carbon-intensive energy supply to remote communities. Among renewable energy sources in Canada, biomass is a major source of energy, with wood pellets being a notable contributor. In this study, using wood pellets in a remote community of Canada is investigated using life cycle analysis (LCA). Furthermore, wood pellet combustion is compared with diesel combustion, the most common fossil fuel in these regions. SimaPro (version 8.4.0.0) was used with Ecoinvent 3 as the primary library because of the nature of the feedstock. Harvesting, transportation, sawmill operation, pelletization, and combustion stages are considered in LCA. In doing so, first, life cycle data related to each of these stages are collected with respect to eight impact categories of global warming, ozone depletion, carcinogenic, non-carcinogenic, smog, respiratory effects, acidification, eutrophication, ecotoxicity, and fossil fuel depletion. The results indicate that pelletization and combustion stages have the greatest environmental impact, specifically in terms of non-carcinogenic effects from pelletization and respiratory effects from pellet combustion. Additionally, when comparing wood pellets to diesel, wood pellet combustion exhibits superior performance across various impact categories, particularly in non-carcinogenic effects. [ABSTRACT FROM AUTHOR]

In cold climatic regions such as those located across Canada, it is necessary to implement heating system technology that is ultra-efficient and that has near-zero rates of emissions. Such systems would satisfy consumers' energy needs and also comply with environmental standards, especially because the systems would account for more than 80% of residential energy use. This paper investigates two complementary efficient systems that can support these heating systems; ground-source heat pumps (GSHPs) and organic Rankine cycle systems (ORCs). The study proposes to couple these two systems in a parallel configuration. A dynamic simulation model created in TRNSYS platform has been deployed to assess the performance of the combined ORC-GSHP based micro-cogeneration system. This former provides heating to a residential house during the heating mode as needed. It has the capacity to switch to a charging mode, during which the ORC system is directly coupled to the ground heat exchanger (GHE), which works as a thermal energy storage and supplies energy to the GSHP. The feasibility of this combined system arrangement, and its comparison with a conventional GSHP system are examined for use in residential buildings in three cities across the varied climatic regions within Canada, namely Edmonton (AB), Halifax (NS), and Vancouver (BC). Results showed that the proposed micro-cogeneration system recorded less energy use of over 80%. The addition of the ORC system had a definite effect on the performance of the GSHP in that it decreased the operating hours from 11–58% compared to the conventional GSHP case and maintained consistently higher COP values. These results may help to specify viable ORC-GSHP based micro-co/trigeneration systems in cold climatic applications and should be useful for prototype design and development. [ABSTRACT FROM AUTHOR]

As tidal current and marine hydro-kinetic energy converters start to be deployed in pre-commercial arrays, it is critical that the design conditions are properly characterised. Turbulence is known to influence fatigue loads and power production, so developers use turbulence models to generate unsteady flows in order to simulate device performance. Most such models construct a synthetic flow field using a combination of measured parameters and theoretical assumptions. The majority in use today are based on atmospheric flow conditions and may have limited applicability in tidal environments. In the present work, we compare key turbulence model assumptions (which are recommended by the tidal turbine standards and are used in design software) to turbulence measurements from two tidal test sites in Scotland and Canada. Here, we show that the two sites have different levels of conformity to theoretical models, with significant variability within nearby locations at the same site. The agreement with spectral models is shown to be depth-dependent. The vertical component spectrum is better represented by the Kaimal model, while the streamwise spectrum is better represented by the von Kármán model. With the exception of one site, the shear profiles follow a power law, although with a different exponent to that commonly assumed. Both sites show significant deviations from the theoretical length scales and isotropy ratios. Such deviations are likely to misrepresent the loads experienced by a device. These results highlight the turbulence characteristics at real deployment sites, which are not well represented by current models, and, hence, which must be determined using field measurements. [ABSTRACT FROM AUTHOR]

For a user-centered deployment of electric vehicle supply equipment (EVSE) infrastructure, it is vital to understand electric vehicle user charging behavior. This study identifies user behavioral patterns by analyzing data from more than 7000 charging stations in Canada, comparing residential vs. public Level 2, and public direct current fast (DCFC) vs. public Level 2 charging. A novel algorithm, CHAODA, was applied to identify differences between DCFC and other Level 2 charging options. Through a multivariate and holistic methodology, various patterns emerge, identifying differences in the utilization and seasonality of different EVSE types. The study provides evidence of an "EV Duck Curve" that amplifies the baseline of the power production "Duck Curve," confirming future challenges for grid stability. Implementations of this study can support future EVSE infrastructure planning efforts and help improve the overall service of electric vehicle supply equipment and grid stability. [ABSTRACT FROM AUTHOR]

Bioenergy represents a viable renewable alternative for the many off-grid remote communities in Northern Canada that rely on diesel-based energy infrastructure. Despite the abundance of forest-based biomass, bioenergy for heat and power in Canada is used primarily in industrial contexts. Community-scale bioenergy, although growing, has been limited. Supply chain challenges, institutional and policy arrangements, and community perspectives indicate a need to better understand the 'business ecosystem' for bioenergy in Canada. The ecosystem includes technologies, community contexts, suppliers, developers, and policy makers. In this study, we explore the bioenergy business ecosystem challenges and perspectives from supply-side stakeholders. Interviews were conducted with representatives from the government, industry, and community—all working in bioenergy. The results indicate the following challenges facing the bioenergy ecosystem, with respect to community energy security: lack of cross-jurisdictional consistency in legislation and policies across Canada, structural issues such as subsidized energy and utility ownership, and misdirected support for local capacity building in the bioenergy sector. We also find that the existing support systems are prone to misuse, pointing to efficiency gaps in investment flows. The insights that emerge from this work, especially from industry stakeholders, are meaningful for communities and policy makers alike. [ABSTRACT FROM AUTHOR]

The transport sector generates more than 35% of total CO2 emissions. Electric vehicles are the future of transportation systems, and the demand for electric vehicles has grown considerably in the last few years due to government support. Companies worldwide are investing heavily in electric car charging stations based on renewable energy. This research study presents a complete design (including an appropriate energy management strategy) for a photovoltaic energy-based electric vehicle charging station (EVCS) with or without the support of a fuel cell and electrolyzer system. The parameters considered for designing the necessary capacity of the battery pack to support the required load are relative to the location-specific solar radiation (using RETScreen® Clean Energy Management Software, Version 9.0, Government of Canada, Toronto, Canada), the efficiency of the solar panel, the used strategy, etc. The battery capacity in the EVCS design based on a power-following strategy is about 20 times smaller than that resulting in the reference design. Additionally, the cost for an EVCS design based on a power-following strategy is almost half that resulting in the reference design. An analysis of the power-following strategy was carried out according to three EVCS operating scenarios. [ABSTRACT FROM AUTHOR]

As Alberta increases conventional solar power generation, land-use conflicts with agriculture increase. A solution that enables low-carbon electricity generation and continued (in some cases, increased) agricultural output is the co-locating of solar photovoltaics (PV) and agriculture: agrivoltaics. This review analyzes policies that impact the growth of agrivoltaics in Alberta. Solar PV-based electricity generation is governed by three regulations based on system capacity. In addition, agrivoltaics falls under various legislations, frameworks, and guidelines for land utilization. These include the Land Use Framework, Alberta Land Stewardship Act, Municipal Government Act, Special Areas Disposition, Bill 22, and other policies, which are reviewed in the agrivoltaics context. Several policies are recommended to support the rapid deployment of agrivoltaics. Openly accessible agrivoltaics research will help optimize agrivoltaic systems for the region, and can be coupled with public education to galvanize social acceptability of large-scale PV deployment. Clearly defining and categorizing agrivoltaics technology, developing agrivoltaics standards, making agrivoltaics technology-friendly regulations and frameworks, and developing programs and policies to incentivize agrivoltaics deployment over conventional PV will all accelerate the technology's deployment. Through these measures, Alberta can achieve conservation and sustainability in the food and energy sectors while simultaneously addressing their renewable energy and climate-related goals. [ABSTRACT FROM AUTHOR]

Crossfield is located in the province of Alberta in Canada and is one of the most well-known reservoirs of hydrocarbons. Since the 1950s, there has been continuous exploitation of more than 10 formations such as Cardium, Viking, Ellerslie, Elkton, Shunda, and Wabamun. Because of its location near the Foothills, the southwestern part of the Western Canada Sedimentary Basin, the Crossfield area has a complex geology and relatively deeper reservoirs, therefore requiring an in-depth examination of each formation. In this study, geological, technical, and economic analyses were performed on each formation within the 10 sections of the study lands in the Crossfield area. As the result of the study, there was potential for drilling 48 horizontal wells in the Cardium A zone and the Viking formation. In addition, it turned out to be economically feasible even at the WTI price of 60 dollars per barrel considering Alberta's Royalty Framework, which is determined by the production rate and the price of oil, and the Horizontal Oil New Well Royalty Rate feature. A further study is required to investigate the exploitation potential of the Cardium B zone, the Ellerslie, and the Elkton formations in this area. [ABSTRACT FROM AUTHOR]

The performance of air-type PVT and BIPVT collectors has been extensively studied. As a system that generates heat and power, PVT collector testing has some particularities especially when using air as a heat recovery fluid and a building-integrated design (BIPVT). The electrical and thermal experimental performance of such collectors are currently being evaluated using in-house methods or PV and/or solar thermal collector standards. The use of a wide range of methods, testing conditions and experimental setups makes it difficult not only to compare the performance of different designs, but also to have confidence in the results obtained. This study evaluates the performance of an air-type BIPVT collector with in-channel perforated baffle plates for heat transfer enhancement designed for a building-integrated façade. As part of a joint research project between Korea and Canada, the proposed collector's performance was evaluated through indoor (Canada) and outdoor experiments (Korea). Limited comparison of the results obtained with the two testing methods could be performed due to differences in environmental testing conditions, BIPVT collector area and experimental setup. Nevertheless, the limited measurement points under comparable testing conditions indicate that the results from the indoor and outdoor experiments have a similar trend. A comparison between the studied collector having a full PV absorber and a BIPVT collector with a hybrid PV/solar thermal collector absorber using a similar indoor experimental setup and testing conditions was performed. It showed that under still air conditions, for an irradiance level of approximately 820 W/m2 and with a low flow rate, the BIPVT collector with a hybrid PV/solar thermal absorber has a thermal and electrical efficiency of 25.1% and 5.9%, respectively. Under similar conditions, the BIPVT collector with a full PV absorber has a thermal efficiency of 23.9% and an electrical efficiency of 13.5%. At higher flowrates, both units have similar thermal efficiencies, however, the BIPVT collector with a PV absorber remains with an electrical efficiency that is more than double that of the unit with a hybrid PV/solar thermal absorber. [ABSTRACT FROM AUTHOR]

A potentially viable solution to the problem of greenhouse gas emissions by vehicles in the transportation sector is the deployment of hydrogen as alternative fuel. A limitation to the diffusion of the hydrogen-fuelled vehicles option is the intricate refuelling stations that vehicles will require. This study examines the practical use of hydrogen fuel within the internal combustion engine (ICE)-powered long-haul, heavy-duty trucking vehicles. Specifically, it appraises the techno-economic feasibility of constructing a network of long-haul truck refuelling stations using hydrogen fuel, across Canada. Hydrogen fuel is chosen as an option for this study due to its low carbon emissions rate compared to diesel. This study also explores various operational methods, including variable technology integration levels and truck traffic flows, truck and pipeline delivery of hydrogen to stations, and the possibility of producing hydrogen onsite. The proposed models created for this work suggest important parameters for economic development, such as capital costs for station construction, the selling price of fuel, and the total investment cost for the infrastructure of a nation-wide refuelling station. Results showed that the selling price of hydrogen gas pipeline delivery option is more economically stable. Specifically, it was found that at 100% technology integration, the range in selling prices was between 8.3 and 25.1 CAD$/kg. Alternatively, at 10% technology integration, the range was from 12.7 to 34.1 CAD$/kg. Moreover, liquid hydrogen, which is delivered by trucks, generally had the highest selling price due to its very prohibitive storage costs. However, truck-delivered hydrogen stations provided the lowest total investment cost; the highest is shown by pipe-delivered hydrogen and onsite hydrogen production processes using high technology integration methods. It is worth mentioning that once hydrogen technology is more developed and deployed, the refuelling infrastructure cost is likely to decrease considerably. It is expected that the techno-economic model developed in this work will be useful to design and optimize new and more efficient hydrogen refuelling stations for any ICE vehicles or fuel cell vehicles. [ABSTRACT FROM AUTHOR]

Multisource energy data, including from distributed energy resources and its multivariate nature, necessitate the integration of robust data predictive frameworks to minimise prediction error. This work presents a hybrid deep learning framework to accurately predict the energy consumption of different building types, both commercial and domestic, spanning different countries, including Canada and the UK. Specifically, we propose architectures comprising convolutional neural network (CNN), an autoencoder (AE) with bidirectional long short-term memory (LSTM), and bidirectional LSTM BLSTM). The CNN layer extracts important features from the dataset and the AE-BLSTM and LSTM layers are used for prediction. We use the individual household electric power consumption dataset from the University of California, Irvine to compare the skillfulness of the proposed framework to the state-of-the-art frameworks. Results show performance improvement in computation time of 56% and 75.2%, and mean squared error (MSE) of 80% and 98.7% in comparison with a CNN BLSTM-based framework (EECP-CBL) and vanilla LSTM, respectively. In addition, we use various datasets from Canada and the UK to further validate the generalisation ability of the proposed framework to underfitting and overfitting, which was tested on real consumers' smart boxes. The results show that the framework generalises well to varying data and constraints, giving an average MSE of ∼0.09 across all datasets, demonstrating its robustness to different building types, locations, weather, and load distributions. [ABSTRACT FROM AUTHOR]

Carbon capture, utilization, and storage (CCUS) is an attractive technology for the decarbonization of global energy systems. However, its early development stage makes impact assessment difficult. Moreover, rising popularity in carbon pricing necessitates the development of a methodology for deriving carbon abatement costs that are harmonized with the price of carbon. We develop, using a combined bottom-up analysis and top-down learning curve approach, a levelized cost of carbon abatement (LCCA) model for assessing the true cost of emissions mitigation in CCUS technology under carbon pricing mechanisms. We demonstrate our methodology by adapting three policy scenarios in Canada to explore how the implementation of CO2-to-diesel technologies could economically decarbonize Canada's transportation sector. With continued policy development, Canada can avoid 932 MtCO2eq by 2075 at an LCCA of CA$209/tCO2eq. Technological learning, low emission hydroelectricity generation, and cost-effective electricity prices make Quebec and Manitoba uniquely positioned to support CO2-to-diesel technology. The additional policy supports beyond 2030, including an escalating carbon price, CO2-derived fuel blending requirements, or investment in low-cost renewable electricity, which can accelerate market diffusion of CO2-to-diesel technology in Canada. This methodology is applicable to different jurisdictions and disruptive technologies, providing ample foci for future work to leverage this combined technology learning + LCCA approach. [ABSTRACT FROM AUTHOR]

As Canadian crude bitumen production from oil sands has increased in recent decades, the nation's oil and gas industry has become a significant contributor to national greenhouse gas emissions. Canada has developed carbon emission reduction targets to meet its Nationally Determined Contributions and Mid-Century Strategy goals. A detailed profile of energy consumption pathways in the oil sands industry is necessary to identify potential areas of improvement and to monitor progress toward meeting emissions reduction targets. Much of the existing literature for oil sands modeling provides input assumptions with different technological boundaries. For a set of oil sands extraction and upgrading technologies, this study first reviews the literature and then quantifies energy input requirements, CO2 emissions, and operating costs for a set of consistent technological boundaries and energy units. Summary results refer to requirements and costs at the production facility, excluding transportation and blending costs. An energy system diagram of oil sands production that matches these boundaries is provided, which can be used by integrated assessment models, oil sands companies, and government ministries to evaluate the present and future energy consumption and emissions pathways of the oil sands industry. [ABSTRACT FROM AUTHOR]

Completion design for horizontal wells is typically performed using a geometric approach where the fracturing stages are evenly distributed along the lateral length of the well. However, this approach ignores the intrinsic vertical and horizontal heterogeneity of unconventional reservoirs, resulting in uneven production from hydraulic fracturing stages. An alternative approach is to selectively complete intervals with similar and superior reservoir quality (RQ) and completion quality (CQ), potentially leading to improved development efficiency. In the current study, along-well reservoir characterization is performed using data from a horizontal well completed in the Montney Formation in western Canada. Log-derived petrophysical and geomechanical properties, and laboratory analyses performed on drill cuttings, are integrated for the purpose of evaluating RQ and CQ variability along the well. For RQ, cutoffs were applied to the porosity (>4%), permeability (>0.0018 mD), and water saturation (<20%), whereas, for CQ, cutoffs were applied to rock strength (<160 Mpa), Young's Modulus (60–65 GPa), and Poisson's ratio (<0.26). Based on the observed heterogeneity in reservoir properties, the lateral length of the well can be subdivided into nine segments. Superior RQ and CQ intervals were found to be associated with predominantly (massive) porous siltstone facies; these intervals are regarded as the primary targets for stimulation. In contrast, relatively inferior RQ and CQ intervals were found to be associated with either dolomite-cemented facies or laminated siltstones. The methods developed and used in this study could be beneficial to Montney operators who aim to better predict and target sweet spots along horizontal wells; the approach could also be used in other unconventional plays. [ABSTRACT FROM AUTHOR]

Construction time and time overruns for infrastructure projects have been frequently studied; however, the construction time of power plants has not been studied. This lack of study is problematic, as more renewable energy power plants, such as wind and solar, are planned for many jurisdictions. Accurately estimating the construction time of a power plant will assist construction planning, budget estimates, and policy development encouraging the use of more renewable sources. The construction times of utility scale power plants in Canada were studied using publicly available data. Multiple linear regression analysis techniques were applied to the data to generate construction time estimation functions for all power plants together, and for individual technologies. The analyses reveal that construction time is sensitive to jurisdiction and the decade of construction, indicating that decisions made by individual Canadian provincial governments at different times had statistically significant impacts on construction time. The analyses also indicated that construction time is a strong function of installed capacity, independent of technology. This finding suggests that large solar or wind energy facilities will encounter longer construction times similar to large hydroelectric facilities. [ABSTRACT FROM AUTHOR]