Search

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 103 CFU/mL to 1.0 × 107 CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria. [ABSTRACT FROM AUTHOR]

Here, we present the rational design of a pinwheel-shaped three-dimensional microfluidic paper-based analytical device (3D-μPAD) for specific, sensitive and multiplexed detection of heavy metals in coastal waters. A more homogeneous permeation of fluids along the chip than common design, even under unskilled performance, has been achieved by the elaborate chip design of the hydrostatic balancing inlet port and uniformly stressed reversible sealing. With the combination of ion imprinted polymer grafted CdTe quantum-dots and fluid accumulation pad, 4 metals (Cu2+, Cd2+, Pb2+, and Hg2+) in 1 analysis and 25-fold enrichment for each metal can be simultaneously performed within 20 min, with detection limits of 0.007–0.015 μg/L. It has the ability to selectively recognize these 4 metals in mixtures and immunizing to interferences from components found in coastal waters, which provided results that were in agreement with values gained from atomic absorption. The inexpensive and portable nature as well as the highly sensitive and flexible performance of the new developed 3D-μPAD could make it attractive as an on-site testing approach for marine environmental monitoring. [ABSTRACT FROM AUTHOR]

Paper-based devices have been very much in the foreground of analytical science recently. This work innovatively proposed a fluorescent paper–based sensor (FPS) constructed on a hybrid polydimethylsiloxane (PDMS)/paper platform where cellulose papers functionalized with carbon dots (CDs) as fluorophores by Schiff base chemistry were loaded on the grooves array of a designed PDMS plate. As a proof of concept, the performance of FPS was investigated with folic acid (FA) as the target analyte. Under optimal conditions, FPS enabled a rapid fluorescence quenching response to FA via inner filter effect in a wide range of 1–300 μmol L−1 with the limit of detection of 0.28 μmol L−1. The feasibility of FPS was further verified by the detection of FA in orange juice and urine samples with satisfactory results. The covalent modification of CDs on paper endowed the FPS with good assay reproducibility and stability. Interestingly, FPS achieved a more sensitive assay of FA than the conventional strategy, by which the same CDs were directly used to detect FA in a solution-based system. The FPS illuminated a novel strategy for construction of reliable and sensitive assays based on paper-based devices. It is of paramount importance for its practical application in biosensing and clinical diagnosis. [ABSTRACT FROM AUTHOR]

A challenge for paper-based cation sensors relying on classical carrier-based ion-selective optodes (ISOs) is their pH-cross response caused by the use of H+-sensitive chromoionophores as optical signal transducers. This work demonstrates fully pH-independent fluorescence-based calcium detection with a paper-based plasticizer-free ISO. To achieve a pH-independent assay, a solvatochromic dye (SD) instead of a traditional H+-sensitive chromoionophore has been applied to the paper-based ISO by means of inkjet printing technology. The detection principle depends on an ionophore-driven phase-transfer ion-exchange reaction between target cations and the positively charged SD, which no longer involves H+ in the optical signal transduction process. The developed paper-based ISOs with the SD resulted in Ca2+ concentration-dependent response curves not affected by the sample pH (pH 6.0, 7.0, and 8.0). The dynamic range obtained for Ca2+ detection was from 10−5 to 1 mol L−1 with a detection limit of 19.3 μmol L−1. Additionally, excellent selectivity derived from the used ionophore has been confirmed. As a simple practical application, the determination of Ca2+ in mineral water has been achieved without the pH-buffering process required for conventional cation-exchange ISOs. [ABSTRACT FROM AUTHOR]

Infections caused by foodborne microorganisms are a great threat to the global environment and public healthcare today. Thus, rapid, portable and sensitive assays that can realize the identification of foodborne bacteria are highly desired. In this study, a smart fluorescent and colorimetric dual-readout sensing system has been established for simple and rapid E. coli determination by utilizing the Cu2+-triggered oxidation of o-phenylenediamine (OPD). Initially, Cu2+ can oxidize OPD to OPDox, resulting in an orange-yellow fluorescence and visible pale-yellow color. However, E. coli can effectively reduce Cu2+ into Cu+, inhibiting the Cu2+-triggered oxidation of OPD to OPDox. Consequently, the introduction of E. coli can turn off both the fluorescence and the UV-vis absorbance signals of the OPD-Cu2+ system, illustrating an original mechanism for fluorescent and colorimetric dual-channel detection of E. coli. Moreover, a filter paper-based visual sensor was built and coupled with OPD-Cu2+ solution under the assistance of a UV lamp. The as-prepared sensor can detect E. coli quantitatively with the help of a typical smartphone color-scanning application (APP). Thus, this study offers a valid dual-mode assay for sensitive and on-site visible detection of E. coli, guaranteeing the reliability of the results and is more attractive for practical use. [ABSTRACT FROM AUTHOR]

Paper has been present in the world of analytical chemistry for centuries, but it seems that just a few years back it was rediscovered as a valuable substrate for sensors. We can easily list some of the countless advantages of this simple cellulosic substrate, including mechanical properties, three-dimensional fibrous structure, biocompatibility and biodegradability, easiness of production and modification, reasonable price, and availability all over the world. Those characteristics make paper a first-choice substrate for disposable sensors and integrated sensing platforms. Nowadays, numerous examples of paper-based sensors are being presented in the literature. This review describes some of the most prominent examples classifying them by type of detection: optical (colorimetric, fluorescence, surface-enhanced Raman spectroscopy, and transmittance methods) and electrochemical (voltammetric, potentiometric, and conductivity-based methods). We take a closer look at recent advances in immunoassays fabricated on paper, excluding simple lateral flow tests assembled on nitrocellulose. This review also summarizes the main advantages and disadvantages of the use of paper as a substrate for sensors, as well as its impact on their performance and application, presents a short history of paper in analytical chemistry, and discusses fabrication methods and available sources of paper. [ABSTRACT FROM AUTHOR]

Fast, simple, and low-cost on-site visualized detection of inorganic phosphate (Pi) is in great demand since phosphate is the major reason of eutrophication. In this work, a ratiometric fluorescent probe composed by green carbon dots (GCDs) and red carbon dots (RCDs) has been established for high-sensitivity and selective sensing of Pi. A trend of color change from red to green is observed for the detection of Pi under ultraviolet light and the detection limit is 0.09 μM in the range of 0 to 55 μM. Fluorescent test paper prepared from the probe solution was successfully applied to semi-quantitative visual detection of Pi in real-world water and soil samples, which shows great real-world application potentials. [ABSTRACT FROM AUTHOR]

This paper describes initially the application of the Tyndall effect (TE) of metal–organic framework (MOF) materials as a colorimetric signaling strategy for the sensitive detection of pyrophosphate ion (PPi). The used MOF NH2-MIL-101(Fe) was prepared with Fe3+ ions and fluorescent ligands of 2-amino terephthalic acid (NH2-BDC). The fluorescence of NH2-BDC in MOF is quenched due to the ligand-to-metal charge transfer effect, while the NH2-MIL-101(Fe) suspension shows a strong TE. In the presence of PPi analyte, the MOFs will undergo decomposition because of the competitive binding of Fe3+ by PPi over NH2-BDC, resulting in a significant decrease in the TE signal and fluorescence restoration from the released ligands. The results demonstrate that the new method only requires a laser pointer pen (for TE creation) and a smartphone (for portable quantitative readout) to detect PPi in a linear concentration range of 1.25–800 μM, with a detection limit of ~210 nM (3σ) which is ~38 times lower than that obtained from traditional fluorescence with a spectrophotometer (linear concentration range, 50–800 µM; detection limit, 8.15 µM). Moreover, the acceptable recovery of PPi in several real samples (i.e., pond water, black tea, and human serum and urine) ranges from 97.66 to 119.15%. [ABSTRACT FROM AUTHOR]

Microfluidic immunoassay devices are a promising technology that can quickly detect biomarkers with high sensitivity. Recently, many studies implementing this technology on paper substrates have been proposed for improving cost and user-friendliness. However, these studies have identified problems with the large volume of sample required, low sensitivity, and a lack of quantitative accuracy and precision. In this paper, we report a novel structure implemented as a cellulosic material-based microchannel device capable of quantitative immunoassay using small sample volumes. We fabricated microfluidic channels between a transparent cellophane film and water-resistant paper to facilitate loading of small-volume samples and reagents, with a 40-μm-wide immunoreaction matrix constructed in the center of the microchannel using highly precise photolithography. A fluorescence sandwich immunoassay for C-reactive protein (CRP) was successfully implemented that required only a 1-μL sample volume and a 20-min reaction time. We confirmed that the limit of detection of the device was 10–20 ng/mL with a coefficient of variation under 5.6%, which is a performance level comparable to conventional plastic-based human CRP enzyme-linked immunosorbent assay (ELISA) kits. We expect that such devices will lead to the elimination of large amounts of medical waste from the use of ubiquitous diagnostics, a result that is consistent with environmental sustainability goals. [ABSTRACT FROM AUTHOR]

In this paper, we proposed an efficient method for mercury(II) and glutathione detection using a fluorescent nanoprobe as a sensor. Carbon dots were synthesized from polyethyleneimine and ammonium citrate via a one-step hydrothermal method. The fluorescence of carbon dots was quenched since electron transfer occurred due to the interaction between mercury(II) and functional groups on the surface of carbon dots. Adding glutathione to the carbon dots-mercury(II) system, the fluorescence was recovered due to the stronger binding ability of glutathione to mercury(II). Based on the above-mentioned principle, this "off-on" fluorescent sensor can easily achieve the detection of mercury(II) and glutathione, which provided limits of detection of 22.45 nM and 61.89 nM, respectively. In this paper, the proposed method has been applied to detect mercury(II) and glutathione in real lake water and serum, respectively, and a logic gate for sensing glutathione was presented. The developed "off-on" fluorescent sensor with high sensitivity and selectivity has shown great potential for mercury(II) and glutathione detection in environmental and biosensing fields. [ABSTRACT FROM AUTHOR]

A non-destructive and non-invasive method for quantitative characterization of parchment deterioration, based on spectral measurements, is proposed. Deterioration due to both natural aging (ancient parchments) and artificial aging (achieved by means of controlled UV irradiation and temperature treatment) was investigated. The effect of aging on parchment native fluorescence was correlated with its deterioration condition. Aging causes fluorescence intensity drop, spectral shift of the main peak, and an overall change in the fluorescence spectral features. Digital color imaging analysis based on visible reflectance from the parchment surface was also applied, and the correspondent color components (RGB) were successively correlated with the state of parchment deterioration/aging. The fluorescence and color imaging data were validated by analysis of historical parchments, aged between 50 and 2000 years and covering a large variety of states of deterioration. The samples were independently assessed by traditional microscopy methods. We conclude that the proposed optical method qualifies well as a non-destructive tool for rapid assessment of the stage of parchment deterioration. [ABSTRACT FROM AUTHOR]

A new family of coumarin-based pH indicators was synthesized. They are sensitive to pH in either weakly acidic or weakly basic solution. The indicators possess moderate to high brightness, excellent photostability and compatibility with light-emitting diodes. The indicators were covalently immobilized on the surface of amino-modified polymer microbeads which in turn were incorporated into a hydrogel matrix to obtain novel pH-sensitive materials. When a mixture of two different microbeads is used, the membranes are capable of optical pH sensing over a very wide range comparable to the dynamic range of the glass electrode (pH 1–11). [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Microbial resistance to currently available antibiotics poses a great threat in the global fight against infections. An important step in determining bacterial antibiotic resistance can be selective DNA sequence capture and fluorescence labeling. In this paper, we demonstrate the fabrication of simple, robust, inexpensive microfluidic devices for DNA capture and fluorescence detection of a model antibiotic resistance gene sequence. We laser micromachined polymethyl methacrylate microchannels and enclosed them using pressure-sensitive adhesive tapes. We then formed porous polymer monoliths with DNA capture probes in these microchannels and used them for sequence-specific capture, fluorescent labeling, and laser-induced fluorescence detection of picomolar (pM) concentrations of synthetic and plasmid antibiotic resistance gene targets. The relative fluorescence for the elution peaks increased with loaded target DNA concentration. We observed higher fluorescence signal and percent recovery for synthetic target DNA compared to plasmid DNA at the same loaded target concentration. A non-target gene was used for control experiments and produced < 3% capture relative to the same concentration of target. The full analysis process including device fabrication was completed in less than 90 min with a limit of detection of 30 pM. The simplicity of device fabrication and good DNA capture selectivity demonstrated herein have potential for application with processes for bacterial plasmid DNA extraction and single-particle counting to facilitate determination of antibiotic susceptibility. [ABSTRACT FROM AUTHOR]

In this work, green-emitting carbon quantum dots were successfully prepared through a facile one-step solid-state reaction method. The obtained green-emitting carbon dots (G-CDs) showed good fluorescence stability in NaCl aqueous solution and different pH values. Moreover, the G-CDs showed high sensitivity and selectivity for detecting hypochlorite by both fluorometry and colorimetry. Under the optimized condition, a highly sensitive detection of hypochlorite was established in the range of 0.2–100 μM and 10–150 μM for fluorescent and colorimetric methods, respectively. The corresponding limits of detection (LOD) were 0.0781 μM and 1.82 μM, respectively. Therefore, the G-CDs were successfully applied to determinate hypochlorite in actual water samples. In addition, a paper-based sensor loading with the G-CDs was also developed for rapid visual detection of hypochlorite. The results suggested that the G-CDs could be a promising candidate to detect hypochlorite. [ABSTRACT FROM AUTHOR]

Concerns about environmental and food contamination caused by chlortetracycline (CTC) residues have prompted people to explore efficient and convenient CTC monitoring platforms. However, the reported fluorescent probes generally fail to selectively detect CTC due to the structural similarity of tetracycline antibiotics. Herein, an intrinsic dual-emission carbon dots (D-CDs) ratiometric fluorescence sensor was prepared for highly sensitive and selective determination of CTC over other tetracyclines by one-step synthesis. The sensor exhibited a significant fluorescence enhancement at 425 nm after introducing CTC. The fluorescence "turn on" of the sensing system is due to aggregation-induced emission (AIE) phenomenon formed by hydrogen bonds and π conjugation promoting the specific recognition of CTC by D-CDs. The linear detection varied from 0.98 to 143.67 ng mL−1 with a low limit of detection (LOD) of 1.29 ng mL−1 (R2 = 0.998), which was lower than most reported in the literature. The D-CDs sensor was applied to detect CTC in spiked milk, blocked normal human serum, and fish samples with recoveries of 95.5–104.2% and relative standard deviations (RSDs) of 2.6%. Particularly, D-CDs based test papers with a smartphone were prepared for portable and visual detection of CTC by analyzing the various color changes of RGB of fluorescence color, with an LOD of 7.18 ng mL−1 (R2 = 0.9909). The fluorescence sensor designed in this work could be used as a rapid tool with high performance and selectivity for monitoring control in foods. [ABSTRACT FROM AUTHOR]

Concerns about environmental and food contamination caused by chlortetracycline (CTC) residues have prompted people to explore efficient and convenient CTC monitoring platforms. However, the reported fluorescent probes generally fail to selectively detect CTC due to the structural similarity of tetracycline antibiotics. Herein, an intrinsic dual-emission carbon dots (D-CDs) ratiometric fluorescence sensor was prepared for highly sensitive and selective determination of CTC over other tetracyclines by one-step synthesis. The sensor exhibited a significant fluorescence enhancement at 425 nm after introducing CTC. The fluorescence "turn on" of the sensing system is due to aggregation-induced emission (AIE) phenomenon formed by hydrogen bonds and π conjugation promoting the specific recognition of CTC by D-CDs. The linear detection varied from 0.98 to 143.67 ng mL−1 with a low limit of detection (LOD) of 1.29 ng mL−1 (R2 = 0.998), which was lower than most reported in the literature. The D-CDs sensor was applied to detect CTC in spiked milk, blocked normal human serum, and fish samples with recoveries of 95.5–104.2% and relative standard deviations (RSDs) of 2.6%. Particularly, D-CDs based test papers with a smartphone were prepared for portable and visual detection of CTC by analyzing the various color changes of RGB of fluorescence color, with an LOD of 7.18 ng mL−1 (R2 = 0.9909). The fluorescence sensor designed in this work could be used as a rapid tool with high performance and selectivity for monitoring control in foods. [ABSTRACT FROM AUTHOR]

In this paper, intrinsic dual-emission fluorescent carbon dots (CDs) doped with N and S atoms have been firstly fabricated. The characterization results show that CDs are successfully synthesized with two separate fluorescence emissions at 468 nm and 628 nm, respectively. The strong and selective interaction of Cr (VI) ions with CDs lead to obvious fluorescence decrease of CDs at 468 nm, which is caused by a mixed quenching mechanism. At the same time, the fluorescence at 628 nm increase. Interestingly, the CDs solution show obvious color change under the daylight and UV light, so visualization detection of Cr (VI) can be realized in water samples. Based on the data of the emission intensity ratios of F468/F628, Cr (VI) can be detected from 3.8 to 38.9 μM combined with the linear correlation coefficient of 0.998, and the lowest detection concentration is 47.2 nM. The platform is satisfactorily applied to the detection of Cr (VI) ions in water samples. In addition, the CDs could be applied as fluorescent probes for cell imaging with dual fluorescent emission. [ABSTRACT FROM AUTHOR]

The present paper describes a compact point of care (POC) optical device for therapeutic drug monitoring (TDM). The core of the device is a disposable plastic chip where an immunoassay for the determination of immunosuppressants takes place. The chip is designed in order to have ten parallel microchannels allowing the simultaneous detection of more than one analyte with replicate measurements. The device is equipped with a microfluidic system, which provides sample mixing with the necessary chemicals and pumping samples, reagents and buffers into the measurement chip, and with integrated thin film amorphous silicon photodiodes for the fluorescence detection. Submicrometric fluorescent magnetic particles are used as support in the immunoassay in order to improve the efficiency of the assay. In particular, the magnetic feature is used to concentrate the antibody onto the sensing layer leading to a much faster implementation of the assay, while the fluorescent feature is used to increase the optical signal leading to a larger optical dynamic change and consequently a better sensitivity and a lower limit of detection. The design and development of the whole integrated optical device are here illustrated. In addition, detection of mycophenolic acid and cyclosporine A in spiked solutions and in microdialysate samples from patient blood with the implemented device are reported. [ABSTRACT FROM AUTHOR]

A novel fluorescent sensor based on bovine serum albumin stabilized gold/silver nanoclusters (BSA-Au/Ag NCs) was developed for sensitive and facile detection of alkaline phosphatase (ALP) activity. For this fluorescent sensor, ascorbic acid 2-phosphate (AAP) was decomposed into ascorbic acid (AA) and phosphate by catalysis with ALP. The initial red fluorescence of the BSA-Au/Ag NCs was effectively quenched by KMnO4 and then the fluorescence was recovered by addition of AA. The mechanism of interaction between BSA-Au/Ag NCs and KMnO4 and AA was studied with use of the fluorescence lifetime and UV-vis absorption spectra. The results indicated that the oxidation/reduction modulated by KMnO4/AA led to surface structure destruction/restoration of the BSA-Au/Ag NCs, resulting in fluorescence quenching/recovery. The proposed fluorescence-based method based on a dark background was used to detect ALP and had excellent sensitivity, with a detection limit of 0.00076 U/L. Moreover, the method was applied to the determination of added analytes, with satisfactory recoveries (97.0-105.0 %). In a simulated eutrophic water body, this method successfully detected ALP in actual water samples and could monitor the dynamic changes of ALP activity through visual observation. More importantly, the proposed fluorescent sensor not only has the advantages of simple operation and high sensitivity but has also been successfully used on filter paper to establish a rapid and visual test paper for ALP. [ABSTRACT FROM AUTHOR]

Bisphenol A (BPA) is one of the endocrine-disrupting chemicals which might cause reproductive and endocrine system diseases, and poses a serious threat to the ecosystem and human health. This paper reports an ultrasensitive sensor for trace BPA detection employing fluorescence resonance energy transfer (FRET) between modified upconversion nanoparticles (UCNPs) and tetramethylrhodamine. To circumvent the problems of low luminous efficiency of FRET and low sensitivity of sensor, the upconversion nanoparticles with very strong fluorescence efficiency were prepared and quantitatively modified. Results showed that the concentrations of amino groups and streptavidin were 43 nmol/mg and 6.12 μg/mg on the surface of the UCNPs, respectively. Under the optimal detection conditions, the peak intensity of UCNPs at 547 nm was linear with the logarithm of the BPA concentration with the detection limit of 0.05 ng/mL. Without complicated pre-processing, the recoveries were in general between 91.0 and 115.0% in tap water, river water, and disposable paper cup water. Therefore, the proposed sensor is suitable for effective sensing of trace BPA in water samples.ᅟ [ABSTRACT FROM AUTHOR]

Liquid-core waveguide (LCW) has many advantages such as the elimination of optical artifacts typically exhibited in systems employing lenses and filters. However, due to the effect of temporal dispersion, LCWs are typically employed in steady-state fluorescence detection microsystems rather than in fluorescence lifetime measurement (FLM) systems. In this paper, we present a compact liquid-core waveguide time-correlated single-photon counting (LCW-TCSPC) sensor for FLM. The propagation of excitation within the LCW is analyzed both analytically and in simulations, with results in agreement with experimental characterization. Results reveal an optimal region within the LCW for highly accurate FLM. The proposed prototype achieves excellent excitation rejection and low temporal dispersion as a result of optimization of the propagation length of the excitation within the LCW. The prototype achieves a detection limit of 5 nM for Coumarin 6 in dimethyl sulfoxide with < 3% lifetime error. The techniques proposed for analyzing the LCW for TCSPC based FLM and prototype demonstration pave the way for developing high-performance fluorescence lifetime measurement for microfluidics and point-of-care applications. [ABSTRACT FROM AUTHOR]

This paper describes a low-cost reversed-phase sequential injection chromatography method for the determination of glyphosate and aminomethylphosphonic acid in environmental samples. The method is based on the pre-column conversion of glyphosate to glycine by hypochlorite, followed by reaction with o-phthaldialdehyde in presence of 2-mercaptoethanol in borate buffer (pH 9.5) to produce the fluorescent 1-(2′-hydroxyethylthio)-2-N-alkylisoindole. In addition to producing detectable fluorescent indoles, the pre-column derivatization also decreases the polarity of the analytes, favoring their retention on a C18 monolithic column. The isocratic reversed-phase chromatography enabled the separation of both glyphosate and aminomethylphosphonic acid derivatives from polar compounds such as organic acids, humic substances, and carbohydrates which are commonly found in waters and soil extracts. This separation minimizes the laborious sample preparation procedures prior to the analysis. The linear response was observed for concentrations between 0.10 and 12.8 μM. The limits of detection and quantification were 0.03 and 0.10 μM (glyphosate), and 0.015 and 0.050 μM (aminomethylphosphonic acid). At the 0.10 μM concentration level, the relative standard deviations were 21 and 25% for aminomethylphosphonic acid and glyphosate, respectively (n = 5). Recoveries between 80 and 120% were found in the determination of glyphosate and aminomethylphosphonic acid in spiked lake waters (0.80 to 6.4 μM). The method was applied in the determination of kinetic and thermodynamic parameters related to the adsorption of glyphosate on two horizons of an Alfisol from the Paraná State in South Brazil. [ABSTRACT FROM AUTHOR]

A fluorescent sensing platform using KI3-quenched bovine serum albumin stabilized gold nanoclusters has been designed and used as a fluorescent probe for the turn-on detection of homocysteine/cysteine (Cys/Hcy). The fluorescence of gold nanoclusters was quenched by iodine. The fluorescence of quenched gold nanoclusters was effectively switched on by Cys/Hcy devoid of the interference of glutathione. The transmission electron microscopy image, X-ray photoelectron spectroscopy analysis, time-correlated single photon counting analysis, and dynamic light scattering data confirmed the aggregation-induced quenching of fluorescence of gold nanoclusters by iodine. The turn-on response of Cys/Hcy shows two linear ranges from 0.0057 to 5 μM and from 8 to 25 μM, with a limit of detection of 9 nM for cysteine and 12 nM for homocysteine. Real samples were analyzed to monitor Cys/Hcy added to human serum. The fluorescence turn-on response of the probe on a paper strip in the presence of Cys/Hcy was studied.ᅟ [ABSTRACT FROM AUTHOR]

Hydrogen sulfide has recently been identified as a biologically responsive species. The design and synthesis of fluorescence probes, which are constructed with Nile-red or Nile-blue fluorophores and a fluorescence-controllable dinitrophenyl group, for hydrogen sulfide are reported in this paper. The Nile-red-dinitrophenyl-ether-group-based probe ( 1a) is essentially non-fluorescent because of the inhibition of the photo-induced electron-transfer process; when the dinitrobenzene moiety is removed by nucleophilic substitution with the hydrosulfide anion, probe 1a is converted into hydroxy Nile red, eliciting a HS-induced fluorescence turn-on signal. Furthermore, probe 1a has high selectivity and sensitivity for the hydrosulfide anion, and its potential for biological applications was confirmed by using it for real-time fluorescence imaging of hydrogen sulfide in live HeLa cells. The Nile-blue-dinitrobenzene-based probe ( 1b) has gradually diminishing brightness in the red-emission channel with increased hydrogen-sulfide concentration. Thus, this paper reports a comparative study of Nile-red and Nile-blue-based hydrogen-sulfide probes. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

This paper puts forward a new method for the transferrin (Tf) glycoform analysis in body fluids that involves the formation of a transferrin-terbium fluorescent adduct (TfFluo). The key idea is to validate the analytical procedure for carbohydrate-deficient transferrin (CDT), a traditional biochemical serum marker to identify chronic alcohol abuse. Terbium added to a human body-fluid sample produced TfFluo. Anion exchange HPLC technique, with fluorescence detection ( λ 298 nm and λ 550 nm), permitted clear separation and identification of Tf glycoform peaks without any interfering signals, allowing selective Tf sialoforms analysis in human serum and body fluids (cadaveric blood, cerebrospinal fluid, and dried blood spots) hampered for routine test. Serum samples ( n = 78) were analyzed by both traditional absorbance (Abs) and fluorescence (Fl) HPLC methods and CDT% levels demonstrated a significant correlation ( p < 0.001 Pearson). Intra- and inter-runs CV% was 3.1 and 4.6%, respectively. The cut-off of 1.9 CDT%, related to the HPLC Abs proposed as the reference method, by interpolation in the correlation curve with the present method demonstrated a 1.3 CDT% cut-off. Method comparison by Passing-Bablok and Bland-Altman tests demonstrated Fl versus Abs agreement. In conclusion, the novel method is a reliable test for CDT% analysis and provides a substantial analytical improvement offering important advantages in terms of types of body fluid analysis. Its sensitivity and absence of interferences extend clinical applications being reliable for CDT assay on body fluids usually not suitable for routine test. [ABSTRACT FROM AUTHOR]

The main concern pertaining to the safety of Gadolinium(III)-based contrast agents (GBCAs) is the toxicity caused by the unchelated ion, which may be inadvertently present in the solution due most commonly to excess unreacted starting material or dissociation of the complexes. Detecting the aqueous free ion during the synthesis and preparation of GBCA solutions is therefore instrumental in ensuring the safety of the agents. This paper reports the development of a sensitive fluorogenic sensor for aqueous unchelated Gadolinium(III) (Gd(III)). Our design utilizes single-stranded oligodeoxynucleotides with a specific sequence of 44 bases as the targeting moiety. The fluorescence-based assay may be run at ambient pH with very small amounts of samples in 384-well plates. The sensor is able to detect nanomolar concentration of Gd(III), and is relatively unresponsive toward a range of biologically relevant ions and the chelated Gd(III). Although some cross-reactivity with other trivalent lanthanide ions, such as Europium(III) and Terbium(III), is observed, these are not commonly found in biological systems and contrast agents. This convenient and rapid method may be useful in ascertaining a high purity of GBCA solutions. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

This paper reports a novel aptamer-based fluorescent detection method for small molecules represented by acetamiprid based on the specific binding of aptamers with acetamiprid, and the inner filter effect (IFE) of gold nanoparticles (AuNPs) on the fluorescence of CdTe quantum dots (CdTe QDs). When CdTe QDs were mixed with AuNPs, the fluorescence of CdTe QDs was significantly quenched via IFE. The IFE efficiency could be readily modulated by the absorption and the aggregation state of AuNPs. The presence of salt could easily induce the aggregation of AuNPs, resulting in the fluorescence recovery of the quenched QDs. Acetamiprid-binding aptamer (ABA) could adsorb on the negatively charged AuNPs through the coordination interaction to protect AuNPs from salt-induced aggregation, so the fluorescence of CdTe QDs would be quenched by the IFE of AuNPs. However, the specific binding of ABA with acetamiprid could release the ABA from the surfaces of AuNPs and decrease the salt tolerance of AuNPs, so the IFE-decreased fluorescence of CdTe QDs was regained with the presence of acetamiprid, and the fluorescence enhancement efficiency was driven by the concentration of acetamiprid. Based on this principle, the aptamer-based fluorescent method for acetamiprid has been established and optimized. The assay exhibited excellent selectivity towards acetamiprid over its analogues and other pesticides which may coexist with acetamiprid. Under the optimum experiment conditions, the established method could be applied for the determination of acetamiprid with a wide linear range from 0.05 to 1.0 μM, and a low detection limit of 7.29 nM (3σ). Furthermore, this IFE-based method has been successfully utilized to detect acetamiprid in six types of vegetables, and the results were in full agreement with those from HPLC and LC-MS. The proposed method displays remarkable advantages of high sensitivity, rapid analysis, excellent selectivity, and would be suitable for the practical application of target screening in real samples. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Graphene is a two-dimensional carbon nanomaterial one atom thick. Interactions between graphene oxide (GO) and ssDNA containing different numbers of bases have been proved to be remarkably different. In this paper we propose a novel approach for turn-on fluorescence sensing determination of glucose. Hydrogen peroxide (HO) is produced by glucose oxidase-catalysed oxidation of glucose. In the presence of ferrous iron (Fe) the hydroxyl radical (•OH) is generated from HO by the Fenton reaction. This attacks FAM-labelled long ssDNA causing irreversible cleavage, as a result of the oxidative effect of •OH, producing an FAM-linked DNA fragment. Because of the weak interaction between GO and short FAM-linked DNA fragments, restoration of DNA fluorescence can be achieved by addition of glucose. Due to the excellent fluorescence quenching efficiency of GO and the specific catalysis of glucose oxidase, the sensitivity and selectivity of this method for GO-DNA sensing are extremely high. The linear range is from 0.5 to 10 μmol L and the detection limit for glucose is 0.1 μmol L. The method has been successfully used for analysis of glucose in human serum. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

The sialic acid (SA)-phenylboronic acid (PBA) recognition system is of particular interest in the bioconjugation field, because it is simple, fast, efficient, and biocompatible. In this paper, we report a novel method for reversibly labeling living virus with quantum dots (QDs) by taking advantage of this SA-PBA recognition system. The QDs were initially modified with PBA (QDs-PBA) to target them to the surface of vesicular stomatitis virus (VSV), which has abundant with SA on its envelope. The QDs-PBA was of good monodispersity and strong fluorescence, and could be conjugated with VSV by simply incubating with native VSV for 10 min at 37 °C, producing QDs-VSV that was capable of being imaged at the single virion level. The labeling efficiency attained 83 ± 4.3 % (mean ± SD); meanwhile, the activity and recognition ability of the labeled virus were minimally affected. This method was simple, rapid, and reversible. This work promotes the virus labeling development to a new step. That is, native viruses can be reversibly labeled without any modification. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

A double-receptor sandwich method for the fluorescence determination of adenosine triphosphate (ATP) is proposed in this paper. The solid phase receptor on the surface of glass slides is a molecularly imprinted membrane (MIM) containing an artificial nanocavity. It is constructed by a molecular imprinting technique using adenosine monophosphate (AMP) as a template molecule. The labeled receptor is a uranyl-salophen complex containing a fluorescent group or uranyl-salophen-fluorescein (USF). It is synthesized with salophen, 5-aminofluorescein, and uranyl. In a procedure of determining ATP, ATP in sample solution is first adsorbed on the surface of the glass slide through the combination of the AMP group in ATP with the nanocavity in MIM. Then, the adsorbed ATP binds USF through the coordination reaction of the phosphate group in ATP with uranyl in USF to form a sandwich-type structure of MIM-ATP-USF. The amount of ATP is detected through the fluorescence determination of USF bound on the slide. Under optimal conditions, the linear range for the determination of ATP is 0.3 to 4.8 nmol/mL with a detection limit of 0.041 nmol/mL. The proposed method has been successfully employed for the determination of ATP in real samples with the recoveries of 98.5 to 102.5 %. [ABSTRACT FROM AUTHOR]

The fluorescent microsphere has been increasingly used as detecting label in immunoassay because of its stable configuration, high fluorescence intensity, and photostability. In this paper, we developed a novel lateral flow fluorescent microsphere immunoassay (FMIA) for the determination of sulfamethazine (SMZ) in milk in a quantitative manner with high sensitivity, selectivity, and rapidity. A monoclonal antibody to SMZ was covalently conjugated with the carboxylate-modified fluorescent microsphere, which is polystyrene with a diameter of 200 nm. Quantitative detection of SMZ in milk was accomplished by recording the fluorescence intensity of microspheres captured on the test line after the milk samples were diluted five times. Under optimal conditions, the FMIA displays a rapid response for SMZ with a limit of detection of as low as 0.025 ng mL in buffer and 0.11 μg L in milk samples. The FMIA was then successfully applied on spiked milk samples and the recoveries ranged from 101.1 to 113.6 % in the inter-batch assay with coefficient of variations of 6.0 to 14.3 %. We demonstrate here that the fluorescent microsphere-based lateral flow immunoassay (LFIA) is capable of rapid, sensitive, and quantitative detection of SMZ in milk. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

A Correction to this paper has been published: https://doi.org/10.1007/s00216-021-03600-4 [ABSTRACT FROM AUTHOR]

Human acetylcholinesterase (AChE) is a widely studied target enzyme in drug discovery for Alzheimer's disease (AD). In this paper we report evaluation of the optimum structure and chemistry of the supporting material for a new AChE-based fluorescence sensing surface. To achieve this objective, multilayered silicon wafers with spatially controlled geometry and chemical diversity were fabricated. Specifically, silicon wafers with silicon oxide patterns (SiO/Si wafers), platinum-coated silicon wafers with SiO patterns (SiO/Pt/Ti/Si wafers), and Pt-coated wafers coated with different thicknesses of TiO and SiO (SiO/TiO/Pt/Ti/Si wafers) were labelled with the fluorescent conjugation agent HiLyte Fluor 555. Selection of a suitable material and the optimum pattern thickness required to maximize the fluorescence signal and maintain chemical stability was performed by confocal laser-scanning microscopy (CLSM). Results showed that the highest signal-to-background ratio was always obtained on wafers with 100 nm thick SiO features. Hence, these wafers were selected for covalent binding of human AChE. Batch-wise kinetic studies revealed that enzyme activity was retained after immobilization. Combined use of atomic-force microscopy and CLSM revealed that AChE was homogeneously and selectively distributed on the SiO microstructures at a suitable distance from the reflective surface. In the optimum design, efficient fluorescence emission was obtained from the AChE-based biosensing surface after labelling with propidium, a selective fluorescent probe of the peripheral binding site of AChE. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Capillary gel electrophoresis (CGE) in the presence of sodium dodecyl sulfate (SDS) is a well-established and widely used protein analysis technique in the biotechnology industry, and increasingly becoming the method of choice that meets the requirements of the standards of International Conference of Harmonization (ICH). Automated single channel capillary electrophoresis systems are usually equipped with UV absorbance and/or laser-induced fluorescent (LIF) detection options offering general applicability and high detection sensitivity, respectively; however, with limited throughput. This shortcoming is addressed by the use of multicapillary gel electrophoresis (mCGE) systems with LED-induced fluorescent detection (LED-IF), also featuring automation and excellent detection sensitivity, thus widely applicable to rapid and large-scale analysis of biotherapeutics, especially monoclonal antibodies (mAb). The methodology we report in this paper is readily applicable for rapid purity assessment and subunit characterization of IgG molecules including detection of non-glycosylated heavy chains (NGHC) and separation of possible subunit variations such as truncated light chains (Pre-LC) or alternative splice variants. Covalent fluorophore derivatization and the mCGE analysis of the labeled IgG samples with multi-capillary gel electrophoresis are thoroughly described. Reducing and non-reducing conditions were both applied with and without peptide N-glycosidase F mediated deglycosylation. [ABSTRACT FROM AUTHOR]

In the work discussed in this paper, the effect of a high surface-to-volume ratio of a microfluidic detection cell on fluorescence quenching was studied. It was found that modification of the geometry of a microchannel can provide a wider linear range. This is a phenomenon which should be taken into consideration when microfluidic systems with fluorescence detection are developed. The dependence of the linear range for fluorescein on the surface-to-volume ratio was determined. Both fluorescence inner-filter effects and concentration self-quenching were taken into consideration. It was found that inner-filter effects have little effect on the extent of the linear range on the microscale. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

This paper describes the synthesis and characterization of a fluorescent ion-imprinted polymer (IIP) for selective determination of copper ions in aqueous samples. The IIP has been prepared using a novel functional monomer, 4-[( E)-2-(4′-methyl-2,2′-bipyridin-4-yl)vinyl]phenyl methacrylate (abbreviated as BSOMe) that has been spectroscopically characterized in methanolic solution, in the absence and in the presence of several metal ions, including Cd(II), Cu(II), Hg(II), Ni(II), Pb(II), and Zn(II). The stability constant (2.04 × 10 mol l) and stoichiometry (LM) of the BSOMe complex with Cu(II) were extracted thereof. Cu(II)-IIPs were prepared by radical polymerization using stoichiometric amounts of the fluorescent monomer and the template metal ion. The resulting cross-linked network did not show any leaching of the immobilized ligand allowing determination of Cu(II) in aqueous samples by fluorescence quenching measurements. Several parameters affecting optosensor performance have been optimized, including sample pH, ionic strength, or polymer regeneration for online analysis of water samples. The synthesized Cu(II)-IIP exhibits a detection limit of 0.04 μmol l for the determination of Cu(II) in water samples with a reproducibility of 3%, exhibiting an excellent selectivity towards the template ion over other metal ions with the same charge and close ionic radius. The IIP-based optosensor has been repeatedly used and regenerated for more than 50 cycles without a significant decrease in the luminescent properties and binding affinity of the sensing phase. [ABSTRACT FROM AUTHOR]

This paper describes the development of a novel on-line biosensor based on a fluorescently labeled human calmodulin (CaM), hCaM M124C- mBBr, immobilized on controlled-pore glass (CPG), for the analysis of trifluoroperazine (TFP); a phenothiazine drug in human urine samples. The device was automated by packing hCaM M124C- mBBr-CPG in a continuous-flow microcell connected to a monitoring system, composed of a bifurcated optical fiber coupled to a spectrofluorometer. Operating parameters of the on-line biosensor (flow rate, sample injection volume, and carrier solution and buffer pH) were studied and optimized. Under the optimal conditions, the biosensor provides a detection and a quantification limit of 0.24 and 0.52 μg mL, respectively, and a dynamic range from 0.52 to 61.05 μg mL TFP ( n = 5, correlation coefficient 0.998). The response time ( t) was shorter than 42 s (recovery time <4.5 min) and reproducibility and repeatability of the TFP measurements, within the linear response range, were lower than 1.4 and 2.7%, respectively. The device was successfully applied to the analysis of TFP in spiked human urine samples with recoveries ranging between 97 and 101% and with RSDs lower than 5.9%. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Free-flow electrophoresis techniques have been applied for separations in various areas of chemistry and biochemistry. Here we focus on the generation of a free-flow electrophoresis chip and direct monitoring of the separation of different molecules in the separation bed of the miniaturized chip. We demonstrate a fast and efficient way to generate a low-cost micro-free-flow electrophoresis (μFFE) chip with a filling capacity of 9.5 μL based on a multi-lamination technique. Separating webs realized by two transfer-adhesive tapes avoid the problem of gas bubbles entering the separation area. The chip is characterized by isoelectric focusing markers (IEF markers). The functionality of the chip is demonstrated by free-flow isoelectric focusing (FFIEF) of the proteins BSA (bovine serum albumin) and avidin and a single-stranded DNA (ssDNA) fragment in the pH range 3 to 10. The separation voltage ranges between 167 V cm and 422 V cm, depending on the application. [ABSTRACT FROM AUTHOR]

Residues from medicine containers in the collections of the British Museum have been investigated as part of a wider programme of scientific work on Roman surgical instruments. The cylindrical bronze containers are often described as instrument cases, but some contain materia medica, ranging from extensive extant remains of ancient preparations to possible minor deposits on the interior surfaces of the containers. Samples from seven residues have been analysed by gas chromatography-mass spectrometry (GC-MS) to identify lipid, resin and carbohydrate components and by X-ray fluorescence and Raman spectroscopy to characterise inorganic materials. The results have provided evidence for ointments and powders or pills consistent with a medical purpose. The ingredients identified include beeswax, fat, conifer resin and gum-derived sugars, plus elemental carbon and lead and zinc salts. Particularly significant were the varied compositions of residues from four sections of a multi-compartment container. In one of these compartments, the beeswax seems to have been prepared as the 'Punic wax' described by Pliny. Experimental preparation of Punic wax following Pliny's method was undertaken in the laboratory and the product analysed to compare with the ointment residues. This paper discusses the GC-MS results of both the experimental material and the archaeological residues and their significance for the interpretation of the past intended applications of the medicines and the use of the containers. [ABSTRACT FROM AUTHOR]

The paper reports on the exploitation of an educated multi-technique analytical approach based on a wide non invasive step followed by a focused micro-destructive step, aimed at the minimally invasive identification of the pigments decorating the ceiling of the Gilded Vault of the Domus Aurea in Rome. The combination of elemental analysis with molecular characterization provided by X-ray fluorescence and UV-vis spectroscopies, respectively, allowed for the in situ non-invasive identification of a remarkable number of pigments, namely Egyptian blue, green earth, cinnabar, red ochre and an anthraquinonic lake. The study was completed with the Raman analysis of two bulk samples, in particular, SERS measurements allowed for the speciation of the anthraquinonic pigment. Elemental mapping by scanning electron microscopy-energy dispersive spectrometer combined with micro-fluorimetry on cross-section gave an insight into both the distribution of different blend of pigments and on the nature of the inorganic support of the red dye. [ABSTRACT FROM AUTHOR]

In recent years fluorescence microscopy has become a widely used tool for tissue imaging and spectroscopy. Optical techniques, based on both linear and non-linear excitation, have been broadly applied to imaging and characterization of biological tissues. Among fluorescence techniques used in tissue imaging applications, in recent years two and three-photon excited fluorescence have gained increased importance because of their high-resolution deep tissue imaging capability inside optically turbid samples. The main limitation of steady-state fluorescence imaging techniques consists in providing only morphological information; functional information is not detectable without technical improvements. A spectroscopic approach, based on lifetime measurement of tissue fluorescence, can provide functional information about tissue conditions, including its environment, red-ox state, and pH, and hence physiological characterization of the tissue under investigation. Measurement of the fluorescence lifetime is a very important issue for characterizing a biological tissue. Deviation of this property from a control value can be taken as an indicator of disorder and/or malignancy in diseased tissues. Even if much work on this topic has still to be done, including the interpretation of fluorescence lifetime data, we believe that this methodology will gain increasing importance in the field of biophotonics. In this paper, we review methodologies, potentials and results obtained by using fluorescence lifetime imaging microscopy for the investigation of biological tissues. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

The paper investigates an application of luminescent bioassays to monitor the toxicity of organic halides. Effects of xanthene dyes (fluorescein, eosin Y, and erythrosin B), used as model compounds, on bioluminescent reactions of firefly Luciola mingrelica, marine bacteria Photobacterium leiognathi, and hydroid polyp Obelia longissima were studied. Dependence of bioluminescence quenching constants on the atomic weight of halogen substituents in dye molecules was demonstrated. Bacterial bioluminescence was shown to be most sensitive to heavy halogen atoms involved in molecular structure; hence, it is suitable for construction of sensors to monitor toxicity of halogenated compounds. Mechanisms of bioluminescence quenching-energy transfer processes, collisional interactions, and enzyme-dye binding-were considered. Changes of bioluminescence (BL) spectra in the presence of the dyes were analyzed. Interactions of the dyes with enzymes were studied using fluorescence characteristics of the dyes in steady-state and time-resolved experiments. The dependences of fluorescence anisotropy of enzyme-bound dyes, the average fluorescence lifetime, and the number of exponential components in fluorescence decay on the atomic weight of halogen substituents were demonstrated. The results are discussed in terms of 'dark effect of heavy halogen atom' in the process of enzyme-dye binding; hydrophobic interactions were assumed to be responsible for the effect. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Piceid (3,4′,5-trihydroxystilbene-3-β- d-glucoside) is a stilbene which occurs naturally in various families of plants and has been shown to protect lipoproteins from oxidative damage and to have cancer chemopreventive activity. This paper deals with the determination of piceid in cocoa-containing products by using photo-induced fluorescence and the aid of a multicommutated continuous-flow assembly which was provided with an on-line photoreactor. A strongly fluorescent photoproduct is generated from piceid when it is irradiated under UV light for 30 s, which is retained on Sephadex QAE A-25 and directly monitored on this active solid support at 257/382 nm ( λ/ λ, respectively). The pre-concentration of the photoproduct of piceid on the solid support greatly improves both sensitivity and selectivity. The influence of different experimental parameters, both chemical (pH, ionic strength) and hydrodynamic (irradiation time, flow rate, photoreactor length, sampling time), was tested. The sample pre-treatment included delipidation with toluene and cyclohexane, stilbene extraction with ethanol/water (80:20, v/ v) and clean-up by solid-phase extraction on C cartridges and methanol/water (40:20, v/ v) as eluting solution. This procedure allowed the elimination of the aglycon of piceid, resveratrol and other potential interfering species and a recovery of about a 90% piceid. The method was applied to the analysis of piceid in cocoa powder, dark chocolate and milk chocolate. The quantification limits were 1.4, 1.1 and 0.09 mg kg, respectively. Relative standard deviations ranged from 1.8% to 3.1%. This is the first reported non-chromatographic method for determination of piceid in these foods. [ABSTRACT FROM AUTHOR]

Determining the pH values of microscopic plant samples may help to explain complex processes in plants, so it is an area of interest to botanists. Fiber-optic probes with small dimensions can be used for this purpose. This paper deals with the fiber-optic detection of the pH values of droplets of plant xylem exudate based on ratiometric fluorescence intensity measurements with an internal reference. For this purpose, novel V-taper sensing probes with a minimum diameter of around 8 μm were prepared that enable the delivery of fluorescence signal from the detection site on the taper tip to the detector. The taper tips were coated with pH-sensitive transducer (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt; HPTS) and a reference [dichlorotris-(1,10-phenanthroline) ruthenium (II) hydrate (Ru-phen dichloride)] immobilized in a xerogel layer of propyltriethoxysilane and (3-glycidoxy)propyl trimethoxysilane. The prepared probes were sensitive to pH values mainly in the range from 6.0 to 9.0. In the pH range 6-9, the results were limited by measurement errors of about 0.2 pH units, and in the pH range 5-6 by measurement errors of about 0.5 pH units. Using the developed V-taper sensing probes, the pH values of in vivo and in vitro samples of small volumes (∼6 μl) of exudate were measured. The results were validated by comparison with conventional electrochemical pH measurements. [ABSTRACT FROM AUTHOR]

Due to their unique optical and electronic properties, quantum dots (QDs) have been widely used in a variety of biosensors for sensitive detection of biomarkers and small molecules. However, single QD exhibits dynamic fluctuation of fluorescence intensity (i.e., blinking) with the transition between on and off states, which adversely influences the development of QD-based optical biosensors. Therefore, the methods for efficient evaluation of on-state QD are especially important and highly desirable. In this paper, a novel and unique approach based on single-molecule two-color coincidence detection is developed to simply and accurately evaluate the on-state QDs in a microfluidic flow. Our results demonstrate that improved QDs in the on state are detected in a microfluidic flow in comparison with that in the Brownian motion state, thus paving the way to the development of single QD-based biosensors for sensitive detection of low-abundance biomolecules. This single-molecule two-color coincidence detection has been applied for the homegeneous detection of nucleic acids in a microfluidic flow with the detection sensitivity of 5.0 fM. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

In this paper, a rapid, simple, and sensitive method was described for detection of the total bacterial count using SiO2-coated CdSe/ZnS quantum dots (QDs) as a fluorescence marker that covalently coupled with bacteria using glutaraldehyde as the crosslinker. Highly luminescent CdSe/ZnS were prepared by applying cadmium oxide and zinc stearate as precursors instead of pyrophoric organometallic precursors. A reverse-microemulsion technique was used to synthesize CdSe/ZnS/SiO2 composite nanoparticles with a SiO2 surface coating. Our results showed that CdSe/ZnS/SiO2 composite nanoparticles prepared with this method possessed highly luminescent, biologically functional, and monodispersive characteristics, and could successfully be covalently conjugated with the bacteria. As a demonstration, it was found that the method had higher sensitivity and could count bacteria in 3 × 102 CFU/mL, lower than the conventional plate counting and organic dye-based method. A linear relationship of the fluorescence peak intensity ( Y) and the total bacterial count ( X) was established in the range of 3 × 102–107 CFU/mL using the equation Y = 374.82 X − 938.27 ( R = 0.99574). The results of the determination for the total count of bacteria in seven real samples were identical with the conventional plate count method, and the standard deviation was satisfactory. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Correct identification of pigments and all accompanying phases found in colour layers of historical paintings are relevant for searching their origin and pigment preparation pathways and for specification of their further degradation processes. We successfully applied the analytical route combining non-destructive in situ X-ray fluorescence analyses with subsequent laboratory investigation of micro-samples by optical microscopy, scanning electron microscopy/energy-dispersive spectroscopy and X-ray powder micro-diffraction (micro-XRD) to obtain efficiently all the data relevant for mineralogical interpretations of the copper pigments origin. Cu salts (carbonates, chlorides, sulphates, etc.) used as pigments exist in a range of polymorphs with similar or identical composition. The efficiency of the micro-XRD for direct identification of such crystal phases present in micro-samples of colour layers was demonstrated in the presented paper. A new, until now unpublished, type of copper pigment—cumengeite, Pb21Cu20Cl42(OH)40—used as a blue pigment on a sacral wall painting in the Czech Republic was found by means of micro-XRD. Furthermore, azurite, malachite, paratacamite, atacamite and posnjakite were identified in fragments of colour layers of selected Gothic wall paintings. We found Cu–Zn arsenates indicating the natural origin of azurite and malachite; artificial malachite was distinguishable according to its typical spherulitic crystals. The corrosion of blue azurite to green basic Cu chloride was clearly evidenced on some places exposed to the action of salts and moisture—in a good agreement with the results of laboratory experiments, which also show that oxalic acid accelerates the corrosion of Cu pigments. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

The reddish-brown, brown or yellowish stains of circular or irregular shape known as foxing spots have been fully described in conservation literature but still, this phenomenon does not find any scientific agreement since many hypotheses have been raised concerning their origin. In this work a contribution to foxing definition not only focussed on its appearance but also reported on its chemical information. For this purpose foxing stains present in drawings from two Portuguese artists dated from the eighteenth to nineteenth centuries were observed under ultra-violet light and optical microscope and analysed by three non-invasive spectroscopy techniques. The observations carried out on the stains provided information on their surface morphology. The use of energy-dispersive X-ray fluorescence revealed a variation on the elemental content between foxing and paper region. Although the results from X-ray diffraction analysis showed no signs of cellulose degradation in foxing stains, Fourier-transformed infrared analysis revealed the presence of oxide groups. Both the information on the chemical nature and surface morphology of the stains achieved in this study will contribute to increase foxing formation information and develop future protocols for conservation purposes. [ABSTRACT FROM AUTHOR]

Serotonin (5-hydroxytryptamine, 5-HT) plays vital roles in regulating gastrointestinal functions. Thus, the detection of 5-HT in the gastrointestinal tract is of great importance for biomedical research, medical diagnosis, and pharmaceutical therapy. This paper presents a simple, sensitive, and fast method for the quantification of luminally released serotonin in the feces and tissues of the rat proximal colon by means of capillary electrophoresis with laser-induced fluorescence detection. 5-Carboxyfluorescein N-succinimidyl ester was used for precolumn derivatization of serotonin. The optimal separation and detection conditions were obtained with an electrophoretic buffer containing 60 mM borate (pH 8.90) and an air-cooled argon-ion laser (excitation at 488 nm, emission at 520 nm). The serotonin concentrations in the feces and tissues of proximal colons were analyzed with this method, and the average values of serotonin in the feces samples were 1.951 ± 0.446 ng/mg (male) and 2.095 ± 0.533 ng/mg (female) and 1.397 ± 0.267 ng/mg in rat proximal colon tissues. The results demonstrate that this method can accurately determine luminally released 5-HT in rats. [ABSTRACT FROM AUTHOR]

The discovery and use of fluorescent proteins has revolutionized cellular biology. Despite the widespread use of visible fluorescent proteins as reporters and sensors in cellular environments the versatile photophysics of fluorescent proteins is still subject to intense research. Understanding the details of the photophysics of these reporters is essential for accurate interpretation of the biological and biochemical processes illuminated by fluorescent proteins. Some aspects of the complex photophysics of fluorescent proteins can only be observed and understood at the single-molecule level, which removes averaging inherent to ensemble studies. In this paper we review how single-molecule emission detection has helped understanding of the complex photophysics of fluorescent proteins. [ABSTRACT FROM AUTHOR]