Search

The agriculture waste material can give benefit to many production industries. The studied crop is corn (Zea Mays)stalk. The objective of this work was to analysis the chemical composition; to study chemical pulping and papermaking properties of corn stalk and; to investigate the fiber morphology of properties of those crops. Firstly, the chemical composition of corn stalk were determined and compared with other non-woods. After that, chemical corn stalk was conducted in this analysis followed the physical and mechanical properties. The result showed that, corn stalk have cellulose (39.0%) and lignin content is the lowest (7.3%) content rather than other composition. In chemical pulping, reached high pulp yields had been produced and the strength properties: tear index, tensile index, burst and fold verified that they were of an acceptable quality for papermaking. This crop morphology was observed by Scanning Electron Microscopic (SEM), which showed a condensed composition of fiber structure. This study can developed a friendly product and promote the green technology, suitable to be used as an alternative pulp in paper making industry.Keywords:Fiber, Corn stalk, Composition, Green technology, Pulp and paper making.

The aim of this study was to study the morphology and structural characteristic of NCC hydrolyzed from filter paper. The NCCs were extracted by acid hydrolysis at 50°C for 1 hour, using 55% conc. H2SO4 under vigorous mechanical stirring, centrifugation at 12000 rpm in distillate water and followed by homogenizing at 7000 rpm. The morphology and surface profiles of the NCC suspension was characterized using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The crystalline structure of the NCC was evaluated by using X-ray diffraction (XRD) technique. As a result, hydrolysed NCC was found to have a rod liked shape with diameter in the range of 100-300nm length and 10-50nm width, with the aspect ratio value of 10.3 nm. According to XRD investigations, the semi-crystalline cellulose was observed with the presence of an amorphous broad hump and crystalline peaks at 2θ of 15o and 22.7o, respectively. The crystalinity index of the raw filter paper was calculated as 86.7 % and increased to 94.4 % as it was extracted to NCC. Crystallite size of raw filter paper and NCC was calculated as 20.6 nm and 11.4 nm, respectively

This project investigated the use of facile pulping methods to produce pulp from mixed bio-plantation waste fibres using sodium hydroxide, ethanol and garbage enzyme. Papers were successfully made from mixture of corn husk fibres with other bio-based green fibres such as banana stems and pineapple leaves. Soda pulping was found to be efficient in converting the cellulosic bio-fibres to the pulps used for paper making. The papers produced have low tensile strength, high water absorption, high bio-decomposition and degradation rate, as compared to commercial papers. SEM observation revealed that paper made from mixed bio-fibres have lightly cross-linked structures compared to heavily cross-linked or compact network structures found in commercial papers. The paper can be used in applications that require high water absorbency. The paper making process is more environmental friendly as it reduces the usage of wood fibres and hence reduces the environmental problem caused by deforestation.

Homemade water in water cationic polyacrylamide (CPAM) emulsion was applied in cigarette paper pulp as dry strengthening agent with other strengthening agent. Good collaborative effect was achieved when CPAM was used in bleached wheat straw pulp with strengthening agent E and with cationic additives L as paper pulp strengthening agent. It was also showed that distinct strengthening effect was obtained when CPAM emulsion was applied in mixture of bleached needle kraft pulp (NBKP) and wheat straw pulp, breaking length and tearing index of cigarette handsheet made of mix pulp was respectively increased by 22.2% and17.0% when the dosage of CPAM was 0.8% of dry fiber. Through analysis of cigarette handsheet section scanning electron microscopy (SEM) photos, strengthening mechanism of CPAM emulsion to cigarette paper pulp was preliminary studied.

In this article, Fenton oxidation treatment technology was employed to the improving of quality of post treated wastewater from pulp & paper mills in order to increase the recycling ratio of final treated wastewater. The reaction conditions were optimized through single-factor experiments and the removal of color were tested for the optimizing. It was found in this study that the color of Fenton oxidation treated water was variegated with the extending of settling time. The optimized conditions were: Dosage of H2O2 was 682.1mg/L(30% m/m), 1.5 times theoretical consumption, 205mg/L FeSO47H2O (H2O2:FeSO4=15:1), the initial pH and the reaction time were 4.5 and 40min, respectively. The removal of the color and COD were 51.3% and 80% after Fenton treatment. GC-MS analysis shown that the contents of organic extracts and most of organic compounds reduced significantly after the oxidational treatment.

Both water repellency and water vapour barrier properties were endowed at paper surface by coating with beeswax-chitosan latex. It was found that the water vapour transmission rate of coated paper decreased as the drying temperature increased. However, water contact angle was not affected with it. Although the surface morphology deformed at high drying temperature, the roughness values maintained at micro-scale. Further analysis indicated that the water vapour barrier property of coated paper was influenced by the density of the coating layer.

Graphene paper (GP) with layered structure and highly conductive network is fabricated by a facile technique of vacuum filtration and studied as a single-component and binder-free anode of lithium ion batteries (LIBs). The process of fabrication of GP without any binder and high-temperature treatment, in the meantime, great improvement in both the capacity and cycling performance of the GP electrodes have compared with other kinds of traditional graphite electrode materials. Given the simplifying anode fabrication, low manufacturing costs and many electrochemical properties of the GP anode, it is regarded as an excellent anode material of LIB with great promise for its both excellent cycling performance and electrochemical properties. The specific capacity can reach to over 200 mAhg-1after 60 charge-discharge cycles under the current rate of 50 mAg-1.

The wettability of the carbon composite electrode on paper substrate was studied using contact angle measurement. Y-Shield HSF54 carbon composite material were coated on paper substrates with a mask using squeegee coating technique. Contact angles of the ten polar probe liquids with the HSF54 electrodes were measured using a customed-built image acquisition system. With the contact angles obtained for each probe liquid placed on the electrodes, the surface tension of the electrodes was determined using Fox-Zisman theory. The result showed that the critical surface tension of HSF54 carbon composite electrodes was 37.2 mN/m which is considered to be moderately hydrophobic.

There are high organic matter and cation exchange capacity (CEC) in paper mill sludge, which can be used efficiently to amend soil properties and promote the growth of crops. The batch method was used to investigate effects of paper sludge on adsorption and desorption of Cd (II) and Pb (II) in two types paddy soil (red soil, purple soil), through adding paper sludge to red soil and purple soil. The results showed that isothermal sorption process of Cd (II) and Pb (II) by soils and paper sludge could be well described by Langmuir equation and Freundlich equation, and all coefficients (r) were higher than 0.9. The purple soil had a higher sorption capacity of Cd (II) and Pb (II) than red soil. The sorption capacities of Cd (II) and Pb (II) in soils increased after added paper sludge, and they reached adsorption equilibrium as the percentages of paper sludge were 10%, 1% in red soil and purple soil, respectively. The desorption capacities of Cd (II) and Pb (II) in soils decreased after added paper sludge, and they reached minimum as the percentages of paper sludge were 5%, 2% in red soil and purple soil, respectively. It was better to immobilize Cd (II) and Pb (II) after added paper sludge, thus paper mill sludge can relieve the migration of heavy metals in soil-crop systems. It can provide a new way for safe using of heavy metal contaminated soil and resource utilization of paper sludge.

By means of self-emulsifying, blocked & crosslinked cationic polyurethane (CBPU) microemulsion was prepared with isophorone diisocyanate (IPDI), polycaprolactone glycol, bisphenol A, methyldiethanolamine (MDEA) as cationic hydrophilic chain-extending agent, ̴̵̹̹̱̼̽͊̿˰̱̓˰̷̲̼̳̻̹̿̾˰̷̵̱̾̈́˰̴̱̾˰̞˽̫˸́˼́˽̴̵̸̹͉̼̽̈́˽̂˽̵̱̳͉̼̈́˹̵̸͉̼̭̈́˽ڂ˽̴̸̴̵̸̹͉͈͉͉̼̱̹͂̿̈́̽̾̿˰̴̵̱̱̹̀͂̿̀̾̽˸̠̔̔˹˰̱̓˰̷̳̼̹̻̹͂̿̓̓̾̾˰̷̵̱̾̈́˾˰̶̶̵̳̈́̓̕˰̶̿˰̸̵̈́˰̠̥̓̒˰̵̴̲̼̳̻̿˰̱̹͂̈́̿˰̿̾˰̸̵̈́˰̸͉̹̳̱̼̀̓˰̵̵̹̀͂̿̀͂̈́̓˰̶̿˰̸̵̈́˰̵̵̴̱̈́͂̈́˰̵̱̀̀͂˰̵̵͇͂˰̴̵̴̹̓̈́ͅ˾˰̸̵̤˰̵̵̵͈̹̱̼̀͂̽̾̈́˰̵̼͂̓̈́̓ͅ˰̸͇̓̿˰̓̈́͂uctures of tertiary amine group, imidazole ring and urethane group are found in CBPU molecular structure. The morphology of the particle is uniform spheric structure and its size is related to the content of tertiary amine groups of CBPU. The paper strength, especially the wet strength can be obviously increased with the increasing of the blocked ratio of CBPU. The optimum blocked ratio of CBPU is 10%.

By applying sodium hydroxide/urea and a sample freeze drying method, we successfully synthesized green cellulose aerogel from paper waste for the first time. We adjusted the cellulose concentration from 1.5 percents to 4 percents in the initial hydrogel. They yielded densities changing from 0.03-0.1 g/cm3.The absorption capacities varied from 9 to 20 times of their own weight. To investigate the water absorption capacity in relationship with the initial chemical dosage, we changed the input amount of urea and sodium hydroxide, which is the first study ever. The thermal conductivity of the 2 percents sample ranged from 0.029-0.032 W/mK. Besides, the material has a high potential to be used in diaper industry as it is biodegradable which is better than most super absorbent polymers.

Antibacterial paper for packaging was sprayed by nanochitosan as antibacterial ingredients. The bacteriostatic circle method was adopted to evaluate its antibacterial effect on E.coli and Staphylococcus aureus. We investigated the effects of different concentrations of nanochitosan on antibacterial paper thickness, tensile strength, bursting strength, folding strength and antibacterial properties.The results showed that: tensile strength, bursting strength and folding strength of the antibacterial paper is better than the control paper and the thickness has no obvious change. The antibacterial paper enhanced the antibacterial effect following the increasing concentration of nanochitosan. The same concentration of nanochitosan antibacterial paper, its inhibitory effect on E.coli was greater than that of Staphylococcus aureus.

Quaternary ammonium cationic surfactants have very important application in the papermaking industry, which is a series of important paper softening agents. In order to obtain an environment-friendly paper softening agent, a novel diester gemini quaternary ammonium salt cationic surfactant has been prepared. Dodecyldimethyl amine, epichlorohydrin and adipic acid were used as raw materials to synthesize the surfactant, and Fourier transform infrared spectroscopy was used to characterize the groups in reaction product. Moreover, the softening effect of the diester gemini quaternary ammonium salt cationic surfactant was studied in detail.

Raw oil palm fronds (OPF-R) converted into biochar (OPF-B) by torrefaction processes at temperatures range of 200 °C to 300 °C. This study aims to evaluate OPF-B performance to reduce iron ions in artificial solutions and peat water. Batch adsorption carried out at room temperature by stirring (175 rpm) using an orbital shaker. Some parameters observed included optimum torrefaction temperature, optimum conditions of Fe ions adsorption (optimum pH and contact time) and sorption isotherm. Metal content measured using atomic absorption spectroscopy (AAS). Functional groups on material surface characterized using Fourier Transform Infrared (FT-IR). Torrefaction at 260 °C produces biochar with the highest efficiency in removing iron ions. Both functional groups C=O and C-O attributed to lignocellulose on OPF-B were diminished and absorption band of aromatic (C=C) increased which caused by torrefaction. The optimum conditions for removal of Fe ions at pH 5 and 30 minutes contact time. Adsorption process follows the Langmuir Isotherm which indicates the formation of a monolayer with qmax 111.11 mg/g. Amount of 0.025 g OPF-B able to reduce iron concentration from 13.960 mg/L to 0.746 mg/L in 100 mL peat water (has complied with Indonesian clean water standard for iron concentration).

The pectin/functionalized silica coated filter paper (FILPSL2) was used for copper ion adsorption. Silica sol (1), prepared by mixing ethanol, water, TEOS and hydrochloric acid, was slowly added into pectin solution. A piece of filter paper (2 cm x 2 cm) was immersed in the silica-pectin solution for 1 hr. The coated filter paper was dried at room temperature and then oven-dried at 50 °C for 6 hrs to obtain FILPS. The silica sol (2) was subsequently prepared by mixing ethanol, water, N-[3-(Trimethoxysilyl) propyl] ethylenediamine (L2) and hydrochloric acid. The FILPS was immersed in silica sol (2) and the coated paper was oven-dried at 50 °C for 6 hrs to obtain FILPSL2. The SEM micrograph of uncoated Filter paper (FIL) and FILPSL2 showsa characteristic woven pattern. For copper ion adsorption, FILPSL2 was put into 0.1 M of CuCl2solution (pH 2, 25 °C). The color of the paper changes from off-white to intense blue within 5 min due to the complex between amino group of functionalized silica and Cu2+ as evidenced from IR spectroscopy.The equilibrium adsorption percentage and adsorption capacity were 27.10 and 5.5 x 10-3 respectively. The concentrations of copper ion solutions were varied to 10-2and 10-3M at this pH. The lower concentration of copper ion results in the higher adsorption percentage. While the lower concentration of copper ion results in the lower adsorption capacity. The adsorption was also experimented at pH 3.The similar trend was obtained. The optimum pH for adsorption for all concentrations was 2. The effect of interferences on the copper ion adsorption depends on the pH. At pH 2, Ni2+ has a stronger effect. While Cd2+ has a stronger effect at pH 3. The desorption was performed using 0.2 M CH3COOH solution. The complete desorption occurred within 30 min.

In this paper, soy protein papermaking process conditions as dry strength agents were studied. The results show that a part of the three parts of soy protein and a mixed system with a cationic starch alone, or cationic starch, soy protein, as compared to dry strength additives will significantly increase the strength. The optimum conditions were: pulp types E, defatted soy protein, dry vacuum drying method is 105°C, adding ways to add the pulp, the best reaction time was 10min, the optimum dosage of 2%. Soy protein sources are widely readily available, and environmentally friendly and easily biodegradable, paper dry strength agents as a good material.

Proper waste management in Malaysia is needed for the organic wastes such as pineapple leaf and cassava peel where affects the increase the amount of solid waste dump into landfill. Thus, to overcome this problem agro waste material can be constructed in many production industries to commercialize the use of alternative fibre for the paper industry. The main objective of this study is to demonstrate the use of fibrous in pineapple leaf and cassava peel by production of alternative fibre based on chemical properties and surface morphology characteristic. This study conducted for the chemical composition by analysed by TAPPI Test method, Chlorination method and Kuchner-Hoffner method. Every chemical components analyse; Cellulose (Kuchner-Hoofner), Holocellulose (Chlorination method), Hemicellulose (Chlorination method), Hemicellulose, Ash content (T211-om-93), Lignin content (T222-om-98) and Sodium Hydroxide soluble (T203-om-88). The scanning electron microscopy (SEM) was used to observe and determine the morphological characteristic of both crops. The result indicates that pineapple leaf more suitable for becoming an alternative fibre than cassava peels. Pineapple leaves have a high Holocellulose content (85.7%), cassava peels 66%, followed by Cellulose pineapple leaf (66.2%), cassava peels (37.9%). However, hemicellulose content in pineapple leaf (19.5%) less than cassava peels (37.0%). Lignin content of pineapple leaf is lower (4.2%) compared to cassava peels (7.52%) in this study. From SEM images, cassava peel contained abundance fibre such as hemicellulose and cellulose that is held by the lignin in it and Pineapple leaves give a condensed composition of fibre structure. The chemical compositions and morphology study of pineapple leaf and cassava indicate pineapple leaf have a high percentage to be used as an alternative pulp in paper making industry, promoting the green technology. However, cassava peels make some of properties that can also be through for the paper industry.

The total sulfur rate of the coal sample was 4.973%, the inorganic sulfur content was more than 60%, which was the main component in the coal sample. The effect of grinding fineness, flotation pulp density, collector and frother on coal flotation desulfurization were investigated in this paper to remove the inorganic sulfur. The results showed that it reached to the optimum desulfurization rate 54.7% when the optimum grinding fineness was 39.20% -200 mesh rate, pulp concentration was 80 g/L, kerosene consumption was 1.4 kg/t, 2#oil loading was 100 g/t, and the total sulfur content reduced to 2.72%. The optimized flotation condition determined by orthogonal experiments was as follow: pulp density for 60 g/L, kerosene dosage of 1.4 kg/t, 2#oil consumption of 100 g/t. In this case, total sulfur content reduced to 2.19%, the total desulfurization rate and the inorganic desulfurization rate were 55.96% and 92.89%, respectively.

For the conversion of cellulose into biofuel by microorganisms is being studied intensively. This research isolate and screen efficient cellulolytic microorganism from bamboo forest soil based on growth rate on CMC plate, the size of transparent circle, disintegration effect of filter paper, and CMC enzyme activity assay. As a result, efficient cellulose-decomposing fungus J6-1 was obtained. The strains possessed higher filter paper degrading ability and CMC enzyme activity, disintegrating the filter paper into 42.3% at the 5th days and reaching the highest CMC enzyme activity 6.87IU/mL after 120 hours of shake flask fermentation. Strains J6-1 is preliminarily identified asPenicilliumby morphological observation and a great potential cellulolytic strains.

This paper describes the method of treating wheat straw pulp black liquor with microwave radiation. The granular activated carbon and CuO are used as a catalyst.Effects of effective factors such as the total amount, ratio, microwave power, time on treating process are studied. The reaction mechanism is also researched. The results indicate that the oxidative decomposition process of lignin or organic pollutants is combined action of activated carbon and CuO absorption-degradation with microwave induced oxidization. This approach is easy to operate, quickly to treat, completely to react and no new pollutants. So it is used to treat black liquor of containing organic pollutes which is hardly degraded.

In order to optimize the regeneration conditions of cation exchange resin, the paper based on the actual data of production, the cation exchange resin regeneration condition was optimized by the process of mathematical modeling, which achieved good results. Research showed that reducing regeneration acid feeding time could effectively reduce the consumption. It could reduce the production cost and make enterprises obtain more economic benefits. Calculated and measured were agreed showed that the study and calculation on regeneration of cation bed were accord with actual production, and had practical value for ion regeneration process. Through least square fitting showed that the 80min was the best acid feeding time, acid consumption of unit volume of water was the lowest.

This paper aims to study the effect of using Oxidized White Liquor (OWL) on pulp brightness in peroxide bleaching. The proper setting of the concentration of hydrogen peroxide, the bleaching temperature, and the bleaching time was also studied. The Central Composite Design (CCD) was proposed to generate necessary experimental runs. Regression analysis was used to determine the relationship equation. Optimization helped determine that to obtain the targeted brightness of 83%, the ratio between the volume of OWL and sodium hydroxide should be 50:50. This ratio should be used with a concentration of hydrogen peroxide at 6.9 g/kg, a bleaching temperature of 90 oC and a bleaching time of 75 minutes.

Both qualitative and quantitative effect of TiO2 suspension presence in cigarette filter have been analyzed in order to reduce harmful substances in cigarette smoke, optimizing the capability of TiO2 suspension as nano filter in cigarette filters and reviewing the analysis in order to obtain results with the best variation. Samples in the form of filter paper that has passed of the smoke with some variation treatment as it become ready to be tested and analyzed. Parameter such as concentration and volume variation of TiO2 suspension, and also the inputting method of TiO2 suspension into cigarette filter. Samples were characterized using FT-IR spectrophotometer and samples data absorbance obtained in each catchment area. The results showed that by reducing absorbance value percentage of each catchment area, with inputting method of TiO2 suspension through the cigarette filter tip and base, it appears that the most stable and lowest reduction present in C3 and H3, which is sample with 1.85 mol/liter concentration and 0.3 ml suspension volume. Both sample reduced particulate matters significantly after confirmed with X-Ray Fluorescence and SEM-EDS results, and was compared to sample filter without TiO2. Inputting method of TiO2 suspension through a base of cigarette butt is better and safer than through end of cigarette filter.

The manufacturing of furniture using rattan is becoming common nowadays, and creates high amount of waste that can be value-added into binderless particleboards (BPB). In order to determine the suitability of the rattan waste for production of BPB, characterization of rattan waste is executed and reported in this paper. The physical properties such as density and moisture content of the rattan waste, together with its morphological study and thermal analysis as well as lignin content are evaluated. It is observed that density and moisture content for rattan waste are in the range of 0.64g/cm3, and 11.3% respectively. On the other hand, the morphology of rattan stem showed that rattan waste has various diameters of vascular bundles along with wide metaxylem vessels as well as thin-walled fibres. Thermal analysis of rattan waste explicated that rattan waste went through endothermic process with peak melting point of 177.80 °C during heating. The greatest weight loss occurred at 257.03 °C. Rattan waste has high lignin content of 21.2% that obtained through Klason lignin test. These promising preliminary results show that the rattan waste is appropriate to be used as raw materials in producing BPB.

This study aimed to analyze the kinetics of enzymatic hydrolysis of cellulose. Cellulase enzyme was obtained fromAspergillusnigergrown on filter paper and the hydrolysis process was carried out in solid state. The kinetic reviewed here was the relationship between glucose production and cellulose mass reduction to optimize the parameters of Monod equation at various moisture levels.

Based on the requirements of sustainable development and innovative design concept, Al films deposited by DC magnetron sputtering solves the paper based Al film forming technology of aluminum plated corrugated cardboard material so as to obtain new environmental protection. To explore the combination design, aluminum plated corrugated cardboard furniture design idea and concept of aluminum plated corrugated cardboard and other materials of the modular design, promotes the application and practical popularization value. The production of functional strong, stylish new aluminum plated corrugated cardboard furniture, can meet the needs of a growing social material production and life.

This document demonstrates how to affect the brightness of liquid package recycled pulp by hydrogen peroxide bleaching and FAS beaching. The optimum H2O2 bleaching process conditions: 8% H2O2, 4% NaOH, bleaching temperature 80 °C, bleaching time 1.5h. The best FAS bleaching conditions was FAS dosage of 0.5%, NaOH dosage of 0.25%, bleaching temperature at 80 °C, time for 30min. And bleaching had no adverse effect on the performance of bleached pulp fiber.

Using novel dual cathode/electro/Fe2+/S2O82-system to treat pickle sauerkraut wastewater, the paper investigates the influencing factors (S2O82-dosage, Fe2 +dosage, current density, Wastewater pH, electrode plate distance) of the organic matters removal and the treatment effect. Test results show that the degree of various factors influence on COD removal of sauerkraut wastewater is different. The COD removal is little effected by pH, while largely effected by current density, dosage of Fe2 +and S2O82-dosage. Under the optimum experiment conditions, current density for 30mA/cm-2, dosage of Fe2 +for 8mmol/L, S2O82-dosage for 12 mmol/L, electrode plate distance for 2 cm and pH=6, sixty minutes electrolysis, wastewater removal rate reach up to 92.6%. These results suggest that this electrochemical oxidation process by dual cathode/electro-Fe2+-S2O82-system might provide an alternative for the degradation of pickle sauerkraut wastewater.

Sludge Concentration (MLSS) is one of major parameters for operation of Anoxic/Aerobic-Membrane Bioreactors（A/O-MBR）and it influences the removal efficiency of pollutants and the rate of membrane fouling as well. This paper focuses on the effects of different MLSS on the treatment of domestic wastewater, the quantity and composition of extracellular polymeric substance (EPS), and the variation of the rate of membrane fouling. It also includes a preliminary analysis of the correlation between EPS and membrane fouling to provide reference for future studies of the mechanism of membrane fouling.

In this research, the laccase mediator system (LMS) was used to modify the unbleached triploid populus tomentosa alkaline hydrogen peroxide pulp (APMP). The changes of pulp brightness were measured and the effects of LMS on the subsequent hydrogen peroxide bleaching were also determined. Besides, the fiber morphology was analyzed by ESEM, and then the obvious changes of pulp have been recovered. In a word, the LMS has obvious effect on cellulose.

This paper made the detailed discourse for the study on using cellulase, hemicellulase hydrolysis of poplar fiber raw material to make glucose. The raw material used in this experiment is poplar, cellulase and hemicellulase enzymes are used. Hemicellulase is a complex system, xylose is regarded as the main chain for a lot of hemicellulose. The experiment used dry poplar as raw material, through the ball mill, ground poplar into wood powder. In the experiment, the optimal condition of enzyme hydrolysis of wood powder has been discussed based on reaction temperature, reaction time, enzyme concentration, and the pH value of reaction. Finally, under the optimal condition, use enzyme to hydrolyse wood powder, measure reducing sugar content by the DNS method, and calculate the rate of hydrolysis.

In this paper, synthesis and fluorescence performance of graphene oxide have been primarily studied. Fistly, graphene oxide with remarkable fluorescence performance was prepared by modified hummer’s method. Secondly, changing the reaction time, the structure and size of graphene oxide were analyzed using X-ray diffraction (XRD) and Malvern Zeta-Size Analyzer, and the effects of different reaction conditions on the XRD patterns of graphene oxide were discussed. Finally, the fluorescence performance of graphene oxide solution were analyzed using fluorescence spectrometer.

The Polyacrylamide (PAM) is a frequently used flocculant for high concentration suspensions removal in water treatment characterized by the generation of large and dense flocs. In this paper, by using the anionic PAM as flocculant, a full-scale experimental study was carried out on flocculating ferric flocs sludge with pelleting flocculation blanket process under scale of 19~38 m3/h. The investigation aimed to optimum the dosage of the PAM and evaluate the application of the PAM in ferric flocs sludge treatment. The experimental results indicated that the increasing of PAM dosage could improve both outlet turbidity and thicken sludge concentration obviously, under the raw wastes concentration of 285~1022 mg/L, the system could achieve ideal operation effect with PAM dosage of 0.3~2.7 mg/L and treatment unit surface loading of 19~38 m3/m2·H. The investigation results also proved that there exists an approximately linear relationship between optimal PAM dosage and raw sludge concentration, that is, the increasing of raw sludge concentration would require synchronously rising of the optimal dosage. While the relationship between maximum surface loading and raw sludge concentration appeared negatively linear dependence, the maximum surface loading would decreased linearly with the increasing of inlet sludge concentration.

Delignification of banana peel, agricultural waste, is considered in the pulp production because lignin is a major obstacle to the gain of cellulose. The soda process as a conventional method and micro-morphology observed by scanning electron microscopy were fulfilled to investigate an optimal condition in this study. The results pointed the potent sequence of operating factors was delignification temperature > solid-liquid ratio > soda concentration > time. The removal of lignin could achieve 92% under the optimal condition using 12%w soda concentration with 1:8 solid-liquid ratio at 100°C for 40 min. This shows that the alkaline delignification is productively sufficient for the pulp production.

This paper mainly researched on preparation and the setting time of Magnesium Phosphate Cement (MPC). The method of orthogonal experiment was adapted to determine the best ratio of MPC, and change the content and types of the material according to the influence of various factors, so as to get the longer setting time of MPC. The results showed that, when the water cement ratio is 0.12, the factors significantly influencing the setting time is magnesium phosphorus ratio (M/P), fly ash and borax. The optimal mixture ratio was obtained through the orthogonal analysis, namely M/P is 3/1, borax content is 16%, and the amount of fly ash is 40%. When M/P is 1/1 and 2/2, borax content is not more than 22%, and the amount of fly ash was less than 60%, the longer setting time of MPC can be produced.

Coal gasification wastewater, as a typical industrial wastewater has poor biodegradability and high toxicity. In this paper, simple anaerobic shaker test was conducted to investigate the degradation of hydroquinone in coal gasification wastewater. Anaerobic sludge shaker test were run for 27, 50 and 73 days, the phenol concentration were adjusted to 300 mg/L and 500 mg/L with pH 7.5, respectively. The experimental results also showed that this system could effectively deal with COD and phenol removal and remain in a stable level when the operational parameters altered while the hydrolysis acidification at 45h is appropriate. Organics degradation and transformation of anaerobic coal gasification wastewater samples at 12h, 24h, 36h, 48h, and 60h were analyzed by GC/MS and it was found that hydrolysis acidification played an important role in degradation of methyl phenol, hydroquinone and refractory compounds. Therefore, the results illustrated that the simple anaerobic shaker process is an easy way for pollutant degradation and treat coal gasification wastewater effectively.

This paper studied effect of different pretreatment process on Yunnan phosphorus building gypsum strength and crystal morphology such as washing method, lime neutralization method, flotation method and Hans method. A lots experiment result indicated that basic properties of phosphorus building gypsum of different pretreatment methods could satisfy related building materials products technology requirements. While inorganic impurities could be effectively removed by lime neutralization method and washing method, as well as organics could be better removed by flotation method, however, compared with other methods, the Hans method possessed the best effect about removing soluble phosphorus, fluorine and organic compounds in phosphogypsum , and had other benefit such as low cost, easy operated and high strength.

This paper presents a comparative evaluation of three lignocellulosic residues (coffee husks, spent coffee grounds and pequi husks) as precursor materials in the production of activated carbons (ACs). Results indicate that the precursor material has a significant effect in both physical and chemical aspects of the adsorbent, with the AC based on spent coffee grounds being the most effective for phenol removal, with maximum adsorption capacity comparable to commercial ACs.

Nowadays the traditional dyeing wastewater treatments based on flocculation-biochemical technology become more difficult than before. The study in this paper aim was it to probe how adding rare earths (REs) into iron-carbon micro-electrolysis process to advance dyeing wastewater degradation. Firstly, the principle was discussed. Then the experimental methods were stated and it followed by exploring effect of iron powder size on the dye decolorization rate. Next were design of the micro electrolysis orthogonal experiments and discussion of influences of related factors on waste water treatment. The experimental results show that besides common iron powder particle size and the processing time, the factors that have great influence on dyeing wastewater treatment are Ce4+, pH, La3+ and iron/carbon ratio. The sequence of factors influence on wastewater micro-electrolysis treatment is Ce4+ > pH > La3+ > iron/carbon ratio. When pH is 6, COD removal rate arrives at maximum 89%, however when the pH is in the case of too high or too low, the effect of sewage degradation is not good.

Ethanol is a kind of basic biomass liquid energy , the conversion of biomass to ethanol has been studied extensively. The process of biomass pretreatment can change its physical and chemical properties, and these changes affect the chemical conversion of biomass products in quality and yield of late. This paper reviews the physical method, chemical method, biological method, three kinds of pretreatment technique, the related principle and development prospects are introduced.

In recent years, with the excellent mechanical properties, good thermal conductivity and electrical conductivity and optical properties, Graphene is widely used in many fields such as chemistry, physics and material science .The preparation of graphene have had a very big progress.This paper reviews the chemical preparation methods of graphene and the application of Graphene / Chitosan composite.Then we point out the outlook of the application of the composite materials graphene with other biological macromolecules which are similar with chitosan.

Composites with the chopped segments of lower part of rice straw (LRSS) as main constituent, poly (vinyl alcohol) (PVA) as adhesive constituent and waste paper (WP) as enhancing constituent were prepared by hot-pressing method. WP showed good enhancing role and certain toughening effect. WP made tensile strength increase by 86% and strength at tensile break by 69%; when composites were prepared at 40% PVA content, 140°C for 10 min. The tensile stretch and stretch at maximum tensile force of WP enhanced composite were respectively 16.5% and 14.3%, while those were respectively 12.3% and 11.9% without WP. The tensile strength of the composites increased with increasing PVA content. From 20% PVA content to 50% PVA content, tensile strength increased by 42.8%. When PVA content was 50%, the composite reached its maximum strength of 8.71 MPa. The hardness of composites lay between 91 and 97.

This paper deals with the advanced oxidation using Electro-fenton reagent for the degradation of azo-dyes in textile effluents. Discharge of textile effluents causes inevitable pollution of water resources which calls for further treatment methods. In this experiment, textile effluent samples were treated with iron electrodes with the reagents, hydrogen peroxide and ferrous sulfate .The acid dye effluents which were used in this study are Acid Orange 7, Acid Red 88, and Acid Violet 7. The temperature was set to 40° C. Samples of 20 ml were analyzed for Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD) and Colour reduction. Experiments were carried out at voltage variations of 2, 4, 6 and 8 volts. From the results, COD and Colour were observed to be reduced drastically from respective original values before treatment with Fenton’s reagent using electro-chemical method.Keywords--- Advanced oxidation, Electro-fenton, BOD, COD, Colour reduction

Sewage sludge is difficult to degrade in anaerobic digestion systems and pretreatments have been shown to speed up the hydrolysis stage. In this paper sludge anaerobic digestion experiments with peracetic acid as a pretreatment were carried out and the effects of acid pretreatment using peracetic acid on subsequent digestion were investigated. It has been proved that this treatment effectively leads to a solubilisation of organic material and thus leads to a increase of soluble chemical oxygen demand (SCOD) and volatile fatty acids (VFA) concentration. Besides, the SV of sludge was reduced and the settling characteristics of sludge were improved. But high dosage of peracetic acid lead to a decrease in biogas production and the proper dosage was 20 g/kg DS. It can be concluded that sludge anaerobic digestion with peracetic acid pretreatment is an effective method for biomass material transformation.

A lignin-degrading bacterium was isolated on mineral salt medium amended by lignosulfonate (L-MSM) agar from the activated sludge of a pulp and paper mill wastewater treatment plant and identified as Sphingobacterium sp. HY-H by biochemical tests and 16S rRNA gene sequencing. The maximum kraft lignin (KL) degradation capability of strain HY-H was determined to be 28.2% on a COD basis under the optimal conditions of pH 7.0, temperature 30°C, and KL to nitrogen (as NH4Cl) ratio of 2 by mass. Moreover, growth kinetic studies showed the KL tolerance of strain HY-H was relatively high and the analysis of KL degradation products by GC-MS revealed the formation of low-molecular-weight aromatic compounds (LMWACs), such as guaiacol, vanillin and vanillyl alcohol, indicating that the strain HY-H can oxidize guaiacyl (G) units and syringyl (S) units in lignin structure. In addition, some low molecular ketone compounds such as 4-hydroxy-2-butanone and methyl vinyl ketone were detected in the inoculated sample after 48h, further validating the partial but possible degradation of KL by strain HY-H.

A novel kind of environmentally friendly composite materials containing upper part of rice straw segments (URSS), poly (vinyl alcohol) (PVA) and waste paper (WP) were prepared by hot-pressing at 140°C for 10 min. The tensile strength, tensile elongation and hardness of composites were measured. Results showed that the tensile strength and the strength at tensile break of the composites first increased and then decreased with increasing PVA content. Tensile strength was higher than the strength at tensile break at different PVA contents, indicating that URSS/PVA/WP composite materials had certain toughness. Otherwise, URSS/PVA/WP composite materials had higher tensile strength than URSS/PVA composites. The tensile strengths of them were respectively 9.25 MPa and 3.9 MPa when prepared at PVA content of 40%. The hardness of composites lay between 90 and 96. Negligible difference exists in every composite.

Aiming at the difficulty of treating dyeing wastewater, the limitation of the traditional electrolysis method, the high cost of active carbon and the environmental pollution of the chicken manure in farms, the paper put forward a new method of using iron combined with biological carbon derived from chicken manure forming internal electrolysis to treat dyeing wastewater. It discussed the effects of mass ratio of iron and biological carbon derived from chicken manure, pH, reaction time, the particle size of iron filings, the aeration rate, circulation velocity and the circling liquid volume on the removal rate of the organic matter in wastewater. The result showed that iron combined with biological carbon derived from chicken manure forming internal electrolysis to treat dyeing wastewater could "using waste to treat waste" and the effect was better. The removal rate of COD was over 85% and the decolorization rate was over 95% when the mass ratio of iron and biological carbon derived from chicken manure was 1:1, the PH was 6, reaction time was was 60min, the particle size of iron filings was 0.9~2.0mm, the aeration rate was 10mL/min, circulation velocity was 50r/min and the circling liquid volume was 2000mL.

The essence of the two phase anaerobic biological treatment process is to place acid bacteria and methane-producing bacteria in two reactors respectively, where it can provide the optimal conditions for their growth and metabolism, allowing them to live up to their maximal activity, which greatly improve processing capacity and efficiency compared to a single-phase anaerobic digestion. The paper start with the two phase anaerobic digestion process, in order to discuss the development direction of high efficient anaerobic digestion system.

The paper introduced a new idea of culturing Chlorella with combined reverse osmosis (RO) brine concentrate and primary effluent from sewage treatment plant as culture medium. This method was expected to reuse wastewater resource and lower the cost of Chlorella cultivation. The biomass of Chlorella at different temperature and different proportion of RO brine (0-90% by volume) were measured. Results showed that Chlorella had an ability to grow in RO brine blended with primary effluent. The biomass of Chlorella in 30% of RO brine blended was the most. At a low temperature of 10℃, the effect of RO brine on Chlorella biomass was obvious, high temperature (30℃) inhibited the growth of Chlorella, 20℃ was the most favorable temperature for growth.

In this paper, the pyrolysis characteristics ofChlorella vulgaris(C. vulgaris) (a kind of microalgae) under different microwave power and pyrolysis atmosphere are studied by microwave oven. The results show that under N2atmosphere, a power of 1500W is required for optimal oil production, 2250W for optimal gas production and 750W for optimal residue. Under CO2atmosphere, a power of 2250W is required for maximum oil production, 1500W for maximum gas production and 750W for maximum residue.