Search

Mineral oil has been used for many years in various electrical equipment, including transformers, as a cooling and insulation medium. However, its low biodegradability and poor performance in terms of fire protection have prompted the search for fluids to replace it, with vegetable oils being prominently considered. In this study, the dielectric, chemical, and physical properties of four vegetable oils obtained from different seeds (sunflower, rapeseed, soybean, and palm) and a biodegradable synthetic fluid are analysed throughout their lifespan in transformers. Their performances are compared with a traditional mineral oil to assess which one is more suitable for use in transformers employing this type of paper. To achieve this, the fluids were subjected to thermal ageing in combination with copper and a thermally upgraded kraft (TUK) paper, with its degradation controlled by measuring the degree of polymerisation. The results demonstrate that the origin of the vegetable oils affects their properties and degradation rates. It was found that most of the alternative fluids are suitable for use in transformers with the TUK paper and that they can increase their lifespan. [ABSTRACT FROM AUTHOR]

This paper describes the process used to produce thermoplastic building materials from non-recyclable mixed plastic–paper packaging waste. A first step was dedicated to an innovative and sustainable sterilization technology for non-recyclable waste, based on exposure to microwave radiation in closed air-circulation ovens. Further, composites with different cellulose contents and with two polymer matrices, respectively, were obtained using an injection process, and the samples were subjected to mechanical and physical tests. Due to their superior features, the products based on mixed polypropylene–paper packaging waste may successfully replace the classic polyvinylchloride-based wood–plastic composites. The environmental impact of mixed plastic–paper packaging waste was analyzed, and the sustainability of the thermoplastic technology was demonstrated from an economic and environmental point of view. [ABSTRACT FROM AUTHOR]

This article introduces the concept of ecological costs associated with the waste paper recycling system. The costs associated with this process include resource consumption, waste emissions, ecological damage, and production processes. To analyze the ecological costs of deviations from the baseline material flow in a waste paper recycling system, a benchmark material flow diagram is constructed using the material flow analysis method. The diagram illustrates a fully closed one-way material flow of the recycling system, which is highly abstracted and simplified. The study analyzed the ecological costs of the benchmark material flow and the impact of deviations from it. The results suggest that the circulation of materials within and between processes increases the ecological cost of the waste paper recycling system. Furthermore, the release of materials from a process into the environment also contributes to its ecological impact. However, the introduction of external materials into the recycling system can reduce its ecological impact, particularly if these materials are recycled resources. The study emphasizes the significance of considering ecological costs in waste paper recycling systems to minimize their environmental impact. [ABSTRACT FROM AUTHOR]

Labels are a crucial component of products, offering informational content and attractive visuals; therefore, the durability of the print is an important quality requirement. On the other hand, in accordance with eco-design, the recyclability of printed labels is vital. In our research, the focus was on the assessment of the durability, recyclability, and deinkability of printed label paper equipped with printed RFID tags. The determined color fastness of electrophotographic prints affected by various environmental factors showed good resistance to dry rubbing and, in most cases, light and moist–heat treatment, confirming the applicability of digital printing on self-adhesive biodegradable paper labels. In the second part of this study, recyclability was assessed, and a comparison between the deinkability of the offset and digital prints and two conductive functional inks was conducted. Good deinkability was observed for the printed RFID antennas on both the offset and electrographic prints, with only a small deterioration in optical properties, especially when nano-silver conductive ink was used. The study highlights the importance of the selection of materials and printing techniques when considering the environmental impact of printed electronics. The results showed that INGEDE 11 is a suitable deinking method for printed RFID antennas on offset and electrographic prints. [ABSTRACT FROM AUTHOR]

Packaging waste correct sorting hugely impacts fiber-based packaging circularity. Currently, this is more crucial than ever, also due to the increased market share of fiber-based packaging. This study evaluated the relationship between the aesthetic properties and user material sorting actions of lightweight dispersion-coated and uncoated paper substrates. Unlike previous literature, no labeling or graphics were involved in this study, focusing on the physical and aesthetic properties of both coatings and substrates. Untrained panelists participated in a multi-phase (descriptive and hedonic) analysis involving a questionnaire and antonym scales about samples' visual and tactile properties, which were also characterized. The results highlight a remarkable panelist's ability to assess the relative gloss and roughness. Perceived roughness and mattness statistically significantly correlated to cellulosic material identification. Moreover, material sorting into the paper recycling stream was statistically significantly regulated by sample mattness, followed by sample roughness. This work suggests that, without any graphic or textual information, the combination of substrate characteristics and coating formulation strongly impacts the packaging aesthetics, hence packaging perception as paper-based material. Consequently, the correct material identification and sorting can be encouraged by proper packaging materials selection and coating development. [ABSTRACT FROM AUTHOR]

The valorization of black liquor, a by-product produced in considerable quantities from the paper manufacturing processes, has demonstrated the effectiveness of thermal reconversion into pyrolysis gas, bio-oil, and bio-char, a sustainable approach placing the feedstock into a circular economy concept. The present study focused on developing disposal solutions through energy recovery via pyrolysis at 300 °C and 450 °C when lignite and nanomaterials (such as Cu-Zn-MCM-41, Ni-SBA-3, or Ni-SBA16) were used as catalysts. The results were compared to those of non-catalytic pyrolysis. The use of the Cu-Zn-MCM-41 catalyst proved to be efficient for pyrolysis gas production, reaching 55.22 vol% CH4. The increase in the calorific value of the pyrolysis gas was associated with the use of the Cu-Zn-MCM-41, showing a value of 42.23 MJ/m3 compared to that of the non-catalytic process, which yielded 39.56 MJ/m3. The bio-oil resulting from the pyrolysis with Cu-Zn-MCM-41 showed the highest energy value at 6457 kcal/kg compared to that obtained with the other two nanocatalysts, Ni-SBA-3 and Ni-SBA-16, as well as that of the raw material, which had a value of 3769 kcal/kg. The analysis of bio-char revealed no statistically significant differences when comparing the outcomes from using the various nanocatalysts, suggesting their minimal impact on the energy content. [ABSTRACT FROM AUTHOR]

Innovation in the circular economy (CE) and the deployment of effective circular business models (CBM) have attracted significant attention in times of growing natural resource scarcity. Despite this widespread interest, significant challenges remain between theoretical innovations and effective CBM implementation in any industrial sector where companies pursue cost-saving opportunities through waste valorisation strategies. Since current methods mislead in terms of the real limitations to designing feasible novel products and services under a circular economy, this study proposes exploring determinants underpinning the organisational resilience of CBMs under a resource efficiency strategy through three case studies. As a result of a co-creation process, the implementation of a CBM framework was built upon empirical data and, thence, a phase-based implementation guide was laid out to assist companies in designing and implementing innovative CBM dealing with the complexity of innovative waste valorisation strategies between the PPI and construction sectors. Relevant findings on managerial and policy recommendations encountered along the demo stage are provided in this paper favouring an effective implementation of CE strategies: the role of technological and non-technological aspects within the CBM, the perspective of the ecosystem and its value proposition, and specific guidelines for the different phases of CBM life cycle. [ABSTRACT FROM AUTHOR]

To reduce the pollution caused by paper sludge in the environment and overcome issues of poor water resistance and brittleness in Magnesium Oxychloride Cement (MOC), the MOC was modified by adding different dosages of paper sludge. The mechanical properties and damage modes of composite MOC materials containing paper sludge were studied by uniaxial compression tests. Under cyclic loading conditions, the damage progression of MOC composites was characterised using the tensile-shear conversion factor (Tsc) and by monitoring the energy parameters (elastic strain energy, plastic strain energy and dissipation energy). The results show that the average peak stress drop of MOC composites gradually increases with the increase in paper sludge dosage. Under uniaxial compression conditions, the Tsc of the MOC composites decreases from 0.99 to 0.44, and the damage mode is transitioned from brittle tensile damage to tensile-shear damage, X-shaped conjugate surface shear damage and finally to pure shear damage with an increase in doping. During cyclic loading conditions, the brittleness of MOC composites gradually decreases with an increase in paper sludge doping, which verifies the effect of paper sludge on the mechanical properties of MOC materials and the change in damage modes from the perspective of energy dissipation. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) is a major contributor to the global economy, but it also poses a challenge for waste disposal, as it generates large amounts of several waste streams. Among these, paper rejects are generated during the papermaking process and could account for up to 25% of the produced paper. Moreover, hundreds of millions of tons of paper are produced annually that end up in landfills if not burnt or recycled. Furthermore, the PPI significantly contributes to climate change and global warming in the form of deforestation and water and air pollution. Therefore, the impact of this industry on the sustainability of natural resources and its adverse environmental health effects requires special attention. This review focuses on discussing the sustainable routes to utilize paper waste and rejects from the PPI towards a circular economy. At first, it discusses the industry itself and its environmental impact, followed by the possible sustainable approaches that can be implemented to improve papermaking processes as well as waste management systems, including paper recycling. The literature indicates that paper recycling is crucial because, if appropriately designed, it significantly lowers greenhouse gas emissions, water and resources consumption, and manufacturing costs. However, several concerns have surfaced about the different chemicals that are used to improve recycling efficiency and recycled paper quality. Furthermore, paper recycling is limited to up to seven times. This review, therefore, goes on to highlight several sustainable waste management routes for paper waste utilization other than recycling by emphasizing the concept of converting paper waste and rejects into energy and high-value materials, including biofuels, biohydrogen, biomethane, heat, nanocellulose, hydrochar, construction materials, and soil amendments. Both the benefits and shortcomings of these waste management routes and their applications are discussed. It becomes clear from this review that sustainable management solutions for paper waste and rejects are implementable, but further research and development are still needed. [ABSTRACT FROM AUTHOR]

Some wastes from the paper pulp production process are still sent to a controlled waste landfill. These materials can constitute alternative resources for constructing road pavements. The study aimed to characterize and explore the sustainable application of two inorganic wastes resulting from the paper pulp process, the dregs (green liquor wastes) and the grits (slaker wastes), in the production of bituminous mixtures by the analysis of samples prepared with 5 and 10% of dregs and 5 and 10% of grits on the baseline reference bituminous mixture AC 14 surf 35/50. Some relevant mechanical properties of the blends were assessed based on Marshall compression, sensitivity to water and wheel-tracking tests. Additionally, water poured on the loose asphalt and compacted slabs' surface was analysed to determine the portion of harmful chemical compounds leached from the asphalt material. The results show that using dregs presented some technical limitations related to mechanical performance and that the incorporation of grits has an acceptable mechanical behaviour. Moreover, the study shows that the measured leachate resulting from water flow in a reference asphalt mixture and the blends with grits are insignificant. It can be concluded that using grits in asphalt mixtures is a promising technique regarding mechanical behaviour and environmental impacts that need further studies. [ABSTRACT FROM AUTHOR]

Melamine-impregnated paper waste (MIPW) is an unavoidable byproduct of the melamine-impregnated paper production process, and it must be urgently disposed. In this paper, due to its high N content, MIPW was used as a N source to co-pyrolyze with camellia oleifera shell (COS). By changing the proportion of MIPW in the raw materials, the migration path of the N was studied during the co-pyrolysis process. X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), total nitrogen analysis (TN) and ultraviolet spectrophotometry were used to determine the content and the types of N-containing components in raw materials and products. The results showed that during the co-pyrolysis process, the N in MIPW and COS would be converted into different types of N-containing components, and the proportion of MIPW in raw materials directly impacts the product distribution and the N migration path. With the increase in the proportion of MIPW from 10 to 50 wt.% (daf, mass ratio), the proportion of N in raw materials that migrated into the solid phase decreased from 27.58 to 16.31 wt.%, while that which migrated to the gas and liquid phases increased from 24.92 and 47.50 wt.% to 25.97 and 57.72 wt.%, respectively. The proportions of N in the raw materials that changed into pyridinic-N, pyrrolic-N and graphitic-N in the solid phase and N2-N in the gas phase were decreased. The proportions of NH3-N and HCN-N in the gas phase and NH3-N and organic-N in the liquid phase were increased. Moreover, synergies were observed during the co-pyrolysis process, which affected the N migration path in the raw material. This study will provide policy directions and theoretical support for the comprehensive utilization of MIPW and COS. [ABSTRACT FROM AUTHOR]

Fine and ultrafine particulate matter are consequences of air pollution in industrialized nations. The use of natural materials for filters produces fewer side effects for humans and the environment, and due to their structural characteristics, they have the potential to effectively filter out fine particles. In this study, we developed an indoor, fine-dust removal filter using Hanji, a traditional Korean paper made from natural materials derived from mulberry trees. We impregnated activated carbon (AC) into the Hanji filter and conducted air permeability and efficiency experiments to determine the improvement in indoor air quality. The Hanji filter showed a removal efficiency of 80.4% within the first minute and 99.1% efficiency by the 38th minute, maintaining an efficiency of >99% thereafter. The dust removal efficiency of the AC-embedded Hanji filter proved superior. The dust adhesion was ~20 g/m2. An AC-embedded Hanji filter has the potential to remove not only fine dust but also volatile substances. The use of natural filters is both effective and sustainable. [ABSTRACT FROM AUTHOR]

Packaging appearance is important in a competitive market. Designers strive to create products that attract customers and often use laminated packaging, due to the attractive appearance and quality characteristics of the material. The circular economy in the recycling of cardboard packaging helps to reduce waste, saves natural resources and increases the quality of the environment. All of the above contributes to sustainable production, but the quality and properties of the obtained recycled paper materials should not be ignored. Recycling of laminated cardboard packaging often has a negative impact on the quality of recycled paper, due to the formation of sticky particles that can affect the optical properties of recycled paper and the efficiency of the recycling process. This article provides insight into the influence of each stage of production of packaging intended for pharmaceutical products on the properties and characteristics of recycled paper. The standard INGEDE 11 deinking method was used to remove dyes and other impurities from the pulp. The obtained optical results of the characteristics of recycled laboratory sheets obtained from laminated and non-laminated cardboard samples were compared in order to determine the impact of each stage of box production on the quality of the paper pulp. The acquired knowledge can be applied in the design phase of a more sustainable product, and laminated materials can be used in luxury products or to increase the functionality of the packaging. Designing for recycling will contribute to an increase in the quality of the obtained paper mass, which is directly related to an increase in the productivity of recycling and the sustainability of the packaging production process. [ABSTRACT FROM AUTHOR]

The rapid growth of airlines over the last period has led to the development of the aviation industry, resulting in increased requirements for ancillary services. Nowadays, the demand for the use of paper-based documents is increasing day by day as airlines encourage passengers to use more ancillary products. One of the most important issues in the aviation industry is flight safety. The procedures and instructions required for all aviation operations are organized in accordance with the regulations and printed on paper in accordance with the demands. For this reason, since it is mandatory to keep all aircraft maintenance, repair, and operation records on printed paper and to keep them for a certain period of time, aircraft fly with almost their entire weight on paper. Considering the global hazards in the world, although the aviation sector is the least environmentally damaging of all transportation sectors, new solutions have been sought to make aviation operations less harmful to the environment, minimize errors and risks, allow for faster communication, and be safer and more sustainable. In order to meet the demands, studies on reducing the use of paper have been brought to the agenda. In this study, after a literature review, real data from a maintenance, repair, and overhaul organization are used to suggest digital conveniences that can save costs, increase productivity, save space, facilitate documentation and information sharing, keep personal information more secure, and help the environment through paperless living. [ABSTRACT FROM AUTHOR]

The production process of the traditional paper making process produces a large amount of waste water, known as paper black liquor. It is needed to explore new ways of reusing this waste and replacing part of the base bitumen to reduce the consumption of non-renewable resources, such as petroleum, thus obtaining better environmental, economic, and social benefits. This paper analyses the feasibility of using paper black liquor, which contains a large amount of lignin, as a modifier for bitumen in the paper industry. Samples of modified bitumen were prepared with 15%, 30%, and 45% of the base bitumen replaced by paper black liquor, and a control group of base bitumen was prepared for testing. The samples were subjected to an 85 min short-term ageing test, FTIR scanning test, thermogravimetric test, frequency scanning test, MSCR test, and LAS test. The analysis of the FTIR and thermogravimetric tests showed that the paper black liquor was mainly composed of lignin and some cellulose, and contained a small amount of salts with Na ions; based on the results of the frequency scan, the compatibility analysis of the vGP curve showed that the modified bitumen was more compatible in the high-temperature range after short-term ageing, thus inferring that the water content of the concentrate had an influence on the compatibility, making it necessary to further investigate different optimum water contents to achieve the best performance and benefit. The incorporation of paper black liquor improved the rutting resistance and fatigue resistance of the modified bitumen, and also gave the paper-black-liquor-modified bitumen a better ageing resistance than the base bitumen. While demonstrating the feasibility of using paper black liquor as an bitumen modifier, this study also helps to provide a basis for theoretical applications of biomass materials in the field of road engineering. [ABSTRACT FROM AUTHOR]

Assessing technological advancements is crucial for the formulation of science and technology policies and making well-informed investments in the ever-evolving technology market. However, current assessment methods are predominantly geared towards mature technologies, limiting our capacity for a systematic and quantitative evaluation of emerging technologies. Overcoming this challenge is crucial for accurate technology evaluation across various fields and generations. To address this challenge, we present a novel approach that leverages bibliometrics, specifically paper citation networks, to gauge shifts in the flow of knowledge throughout the technological evolution. This method is capable of discerning a wide array of trends in technology development and serves as a highly effective tool for evaluating technological progress. In this paper, we showcase the accuracy and applicability of this approach by applying it to the realm of mobile communication technology. Furthermore, we provide a comparative analysis of its quantitative results with other conventional assessment methods. The practical significance of our model lies in providing a nuanced understanding of emerging technologies within a specific domain, enabling informed decisions, and fostering strategic planning in technology-oriented fields. In terms of originality and value, this model serves as a comprehensive tool for assessing technological progress, quantifying emerging technologies, facilitating the evaluation of diverse technological trajectories, and efficiently informing technology policy-making processes. [ABSTRACT FROM AUTHOR]

In order to improve the hydrophobicity of xylan hemicellulose, a simple procedure of its chemical modification with alkyl ketene dimer (AKD), a non-toxic, cost-effective, and eco-friendly chemical, was performed. For this purpose, the reaction products of beech wood xylan and different amounts of hydrophobic AKD were used for paper surface treatment. Thus, the coatings of about 4.5 g/m2 were applied on both sides of base paper in single and three successive layers. To obtain a complete reaction between AKD and xylan hemicellulose, the coated papers were thermal cured (about 110 °C) and the effects of AKD content on the barrier (water, oil, and water vapours) and mechanical properties were analysed. The structural analyses by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) of coated samples emphasized the presence of β-keto-ester compounds as a result of the reaction between xylan hemicelluloses and AKD. This is confirmed by the improving of barrier properties as the AKD content in coating dispersion is higher. The good barrier performance and improved strength properties were obtained for the coated papers with xylan hemicellulose and 1% AKD applied on paper surface in three successive layers (about 4.5 g/m2). In this case, the water vapours transmission rate (WVTR) was 35% lower than those untreated and the resistance to air passing through coated papers was over 3 times higher compared with base paper. There are no results reported on the chemical reaction of xylan hemicelluloses with AKD as well as its application in coatings for paper packaging. In this context, the obtained results in this study can contribute to expand the applications area of hemicelluloses offering a sustainable strategy for the developing of food packaging papers with appropriate barrier properties using biopolymer coating materials. [ABSTRACT FROM AUTHOR]

Urban areas, with their dense populations and complex infrastructures, are increasingly susceptible to various risks, including environmental challenges and infrastructural strain. This paper delves into the transformative potential of digital twins—virtual replicas of physical entities—for mitigating these risks. It specifically explores the role of digital twins in reducing disaster risks, such as those posed by earthquakes and floods, through a comprehensive bibliometric-based literature review. Digital twins could contribute to risk reduction by combining data analytics, simulation, and predictive modeling by creating virtual replicas of physical entities and integrating real-time data streams to better address and manage risks in urban environments. In detail, they can help city planners and decision-makers analyze complex urban systems, simulate potential scenarios, and predict potential outcomes. This proactive approach allows both the identification of vulnerabilities and better implementation of targeted mitigation strategies to enhance urban resilience and sustainability. More informed decisions can be made relying on simulations, and it can also be possible to optimize resource allocation and better respond to emerging challenges. This work reviews the key publications in this domain, with the aim of finding relevant papers that can be useful to urban planners and policy-makers. The paper concludes by discussing the broader implications of these findings and identifying challenges in the widespread adoption of digital twin technology, including data privacy concerns and the need for interdisciplinary collaboration. It also outlines prospective avenues for future research in this emerging field. [ABSTRACT FROM AUTHOR]

As both governments and customers push for sustainable and recyclable textile products, textile companies will have to change their linear business model to a circular one. The aim of the present work is to help these companies take action by providing an update of the state-of-the-art of textile recycling technologies. Extensive desktop research was performed in order to prepare an overview of existing textile recycling technologies, their current state, and projected developments, also including facilitating technologies for sorting and disintegration of textile products, as well as virtual platforms that connect stakeholders and inform consumers. [ABSTRACT FROM AUTHOR]

This article presents a systematic review of studies of the River Chief System (RCS). It utilizes a dataset comprising 363 high-quality papers published between 2009 and 2022, sourced from the Web of Science and the China National Knowledge Infrastructure (CNKI), as the foundation for analysis. The primary research method employed is a literature review. Additionally, CiteSpace bibliometric software (v6.2.R2) is used to perform keyword analysis of RCS research. The key research findings include the following points. Firstly, research into RCS has undergone two phases. Secondly, the review presents several points emergent in the literature that have been the focus of much study, including governance logics, theoretical foundations, operational mechanisms, policy effects, and current challenges. Furthermore, the author identifies key trends in the evolution of RCS, such as public participation, the utilization of information technology, and the implementation of the Lake Chief System, Forestry Chief System, and Field Chief System, as well as the construction of a rule of law. Finally, the author suggests that international comparative studies and an inquiry into long-term mechanisms for the implementation of the RCS are needed. This paper provides the first systematic review of the growing literature on RCS, based on papers written in both Chinese and English. It maps out key research points, identifies research trends, and provides a deeper understanding to guide future research. [ABSTRACT FROM AUTHOR]

Recently, the climate and landfill crises have raised concerns in the UK as the country is struggling to meet the sustainability goal it set to achieve. One of the major reasons is due to the inadequate recycling rate of waste paper. Therefore, as an alternative solution to the issue, the aim of our research was to exploit the potential of waste paper as an insulating material to see whether it can be feasible to improve the recycling rate of waste paper in the country. Waste paper has already been in the construction industry for a while, and the use of cellulose insulation is a standard in the Passivhaus construction approach. The study examines cellulose's performance as an insulation material and its potential to combat the climate crisis by creating four separate comparisons and calculations using Life-Cycle Assessment and Standard Assessment Procedures. The study will investigate the benefits and limitations of the material as well as a case study to justify the use of it. A pioneer project in the field is a retrofit and new-built building project—54–58 Akerman Road in London. It utilises cellulose fibre insulation as the main material for the new-built part. The study will use this project as a context to compare whether cellulose fibre insulation is the best solution for the project. Also, the study will compare cellulose insulation with other conventional insulation materials in a more general setting as well as with the traditional paper recycling approach, by providing an indication of the carbon footprint of the insulation, the energy resources involved and the amount of raw material. By conducting the study, we can know whether recycling waste paper into cellulose insulation is the best solution to the crisis we face. This research can guide the UK's recycling and use of waste paper, reduce paper waste and energy consumption and improve the sustainability of building insulation materials. [ABSTRACT FROM AUTHOR]

As a crucial basic natural resource, water resources are the cornerstone for sustainable national economic development. This paper takes the 2014 pilot water rights trading policy (WRT) as an entry point and uses a difference-in-differences (DID) model to test the policy effect of WRT on water-use efficiency (WUE) based on panel data for 30 Chinese provinces from 2005 to 2021. The study shows that WRT can significantly improve the regional WUE, and these results remain valid after a series of robustness tests, such as the parallel trend test, placebo test, and PSM-DID. Mechanistic analysis revealed that WRT can produce the Porter effect, which affects the WUE through technological innovation. The results of the heterogeneity analysis based on the synthetic control method (SCM) showed that WRT effectively improved WUE in Jiangxi, Henan, Ningxia, Hubei, and Guangdong, but did not achieve the expected effect in Inner Mongolia or Gansu. This paper provides solid empirical support for assessing the effectiveness of WRT and accelerating the process of establishing a unified national WRT market in China by 2025. [ABSTRACT FROM AUTHOR]

Over the past years, machine learning and big data analysis have emerged, starting as a scientific and fictional domain, very interesting but difficult to test, and becoming one of the most powerful tools that is part of Industry 5.0 and has a significant impact on sustainable, resilient manufacturing. This has garnered increasing attention within scholarly circles due to its applicability in various domains. The scope of the article is to perform an exhaustive bibliometric analysis of existing papers that belong to machine learning and big data, pointing out the capability from a scientific point of view, explaining the usability of applications, and identifying which is the actual in a continually changing domain. In this context, the present paper aims to discuss the research landscape associated with the use of machine learning and big data analysis in Industry 5.0 in terms of themes, authors, citations, preferred journals, research networks, and collaborations. The initial part of the analysis focuses on the latest trends and how researchers lend a helping hand to change preconceptions about machine learning. The annual growth rate is 123.69%, which is considerable for such a short period, and it requires a comprehensive analysis to check the boom of articles in this domain. Further, the exploration investigates affiliated academic institutions, influential publications, journals, key contributors, and most delineative authors. To accomplish this, a dataset has been created containing researchers' papers extracted from the ISI Web of Science database using keywords associated with machine learning and big data, starting in 2016 and ending in 2023. The paper incorporates graphs, which describe the most relevant authors, academic institutions, annual publications, country collaborations, and the most used words. The paper ends with a review of the globally most cited documents, describing the importance of machine learning and big data in Industry 5.0. [ABSTRACT FROM AUTHOR]

Blockchain technology has been used for the digitalization of physical asset management and data management processes in many areas in the industry and academia, including the water domain. Its potential as an immutable data storage system and smart contract integration has provided a plethora of use cases and utility in the domain of hydrology and water resources. This systematic review critically examines the application of blockchain technology in the field of water resources and hydrology. By analyzing 104 academic publications and 37 non-academic studies from 2017 to 15 October 2022, this paper identifies the current state of blockchain applications in water management, delineates their potential use cases, and assesses their practical utility and scalability. Despite the theoretical promise of blockchain for enhancing water governance, data security, and stakeholder trust, the review reveals a noticeable gap between theoretical potential and the existence of workable, real-time applications specifically in water resources management. The findings indicate that while blockchain technology has been effectively implemented in various sectors, its adoption in hydrological domain is still emerging, with limited empirical evidence to support full-scale deployment. The paper concludes with a call for more empirical research to validate theoretical benefits, address scalability and interoperability challenges, and integrate blockchain technology with real-time data networks for sustainable water management practices. [ABSTRACT FROM AUTHOR]

Sustainability in power electronics is a recent research topic. It takes place among current actions to grasp design choices that enable eco-design and circular economy in the domain. This paper shows the results and analysis of a literature review at the intersection of power electronics and sustainability without considering the reliability study of the power electronics systems. The first part explains the scope of the study. The second part shows a bibliometric analysis of the collected publications that underlines a pioneering position at the European level. The third part details the state-of-the-art and its analysis over four investigation topics which are: tools and methods, indicators, circularity and materials. This paper and the work behind are the results of collaboration at the French national level, as part of the workgroup CEPPS (Convertisseurs Electronique de Puissance Plus Soutenables—More Sustainable Power Electronics Converters) supported by the CNRS (Centre National de la Recherche Scientifique—French National Centre for Scientific Research) research group SEEDS (Systèmes d'énergie électrique dans leurs dimensions sociétales—Societal dimensions of electrical energy systems). [ABSTRACT FROM AUTHOR]

A successful transition to a lower-emission society may require major changes in the patterns of individual behaviours. Yet, whilst awareness and concern about climate change have increased in recent years among the global population, global greenhouse gases emissions have not ceased to rise. This paper discusses potential reasons underlying the gap between individual knowledge of climate change and the actions implemented to contain greenhouse gas emissions. To investigate this phenomenon, we look at the scientific literature exploring the factors influencing pro-environmental behaviour. First, we highlight how an individual's environmental knowledge is not only approximate but also biased by cognitive, affective, and cultural factors, influencing their appraisal of climate information and their motivation to act. Second, we discuss three major models of pro-environmental behaviour, such as the Theory of Planned Behaviour (TPB), the Norm-Activation Model (NAM), and the Value-Belief-Norm (VBN), to highlight their failure to account for automatic cognitive and affective factors influencing an individual's ability to implement pro-environmental intentions. Then, we discuss the Comprehensive-Action-Determination Model of pro-environmental behaviour (CADM), and its efforts to overcome the limits of the previous models. Finally, we examine the dispositional traits associated with pro-environmental engagement to highlight how the relationship between dispositions and pro-environmental behaviour performance appears related to self-regulation processes, supported by executive functioning; increased self-regulation would enable alignment of pro-environmental intentions and behaviours, and anticipation of the long-term consequences of present behaviours. We conclude by calling for more research to be carried out on the effect of enhanced self-regulation, and of self-regulation training, on individual reactions to the climate crisis. [ABSTRACT FROM AUTHOR]

Packaging and labels are used for a variety of products and have become an indispensable part of daily life, while products without labels or packaging cause uncertainty among consumers. The global trend is to reduce the amount of packaging waste by recycling and reusing the same material or using other available waste raw materials. With large quantities of stalks remaining discarded in the fields after harvest each year, cereal straw is emerging as an alternative source of lignocellulosic fibers for secondary green packaging and labels. In this study, the usability of printed papers with discarded lignocellulosic fibers by offset and gravure printing processes for secondary green packaging and labels was observed based on the qualitative parameters of reproduction and ink penetration into the printing substrate. From the obtained results, it can be concluded that gravure prints have greater penetration of the ink into the printing substrate, resulting in more uneven surface coverage with printing ink, compared to offset prints, where the viscosity of the ink and the printing process itself have the greatest influence. Therefore, these substrates with discarded lignocellulosic fibers can be used for secondary green packaging and labeling printed by the offset printing process, while gravure printing requires an additional coating or a larger amount of filler in the paper structure. [ABSTRACT FROM AUTHOR]

Interest in green marketing in both the academic and practitioner communities has undergone steady growth in recent years. With more than 150 papers published in 2022, the Web of Science (WOS) database confirms this premise. Although some bibliometric analyses on this topic exist, none has included a comprehensive review of the literature, authors, journals, theories, keywords, and future lines of research as does this study. The aim of this paper, therefore, is to consolidate a descriptive bibliometric analysis to identify the main themes studied, the most influential authors and journals, the most commonly used theories, the networks that exist between authors and topics, the most frequently used keywords, and their evolution over the years. It has been found that green marketing research has increased rapidly, especially since 2015. In total, 1741 research articles have been published in 828 journals. The top five authors, the top 10 cited publications, and the top five cited publications by the WOS classification are all analysed herein. Finally, based on keyword analysis, it is concluded that "sustainability", "planned behaviour", "performance", and "trust" have attracted extensive attention over the past decade. [ABSTRACT FROM AUTHOR]

In this study, the primary paper-mill sludge characterized as containing 51% glucan was used to optimize the enzymatic saccharification process for the production of bioethanol using a Box–Behnken design (BBD). Polyethylene glycol 4000 (PEG-4000) surfactant-assisted enzymatic saccharification of dried primary sludge (DPS) showed a 12.8% improvement in saccharification efficiency. There was a statistically significant effect of solid enzyme loading and saccharification time on the enzymatic saccharification of DPS at a 95% confidence level (p < 0.05). The optimum levels of 10.4% w/w DPS solid loading, 2.03% enzyme loading (10 FPU g/DPS), and 1% (w/w DPS) PEG-4000 loading for a saccharification efficiency of 57.66% were validated experimentally and found to be non-significant with regard to the lack of fit with the predicted saccharification efficiency of 56.76%. Furthermore, Saccharomyces cerevisiae fermented the saccharified sugars into ethanol (9.35 g/L) with a sugar-to-ethanol conversion yield of 91.6% compared with the theoretical maximum. Therefore, DPS is a more suitable renewable biomass for determining the presence of fermentable sugar and for the production of ethanol. [ABSTRACT FROM AUTHOR]

Competition issues with food industry have recently boosted the exploration of alternative solutions capable of replacing starch in papermaking to a certain extent. Covalent grafting of quaternary ammonium groups onto LignoBoost® Eucalyptus kraft lignin has recently shown promise in this regard as the cationic products feature excellent water solubility across the entire pH scale. Considering these suitable properties, cationic kraft lignin was applied and evaluated, for the first time, in the perspective of partial substitution of cationic starch in papermaking, using bleached Eucalyptus kraft pulp. Based on an assessment of key paper properties, such as mechanical (tensile, bursting, and tearing indexes), structural (roughness, capillarity rise, air resistance, internal strength, and water contact angle), and optical ones (brightness, opacity, and relative color change), it is safe to conclude that the partial replacement of conventional cationic starch by cationic lignin does not compromise these features. The results also show that properties can be fine-tuned by varying the degree of lignin derivatization, providing paper-specific solutions for replacing starch by lignin potentially available at large-scale at the pulp and paper industry, closing the loop within the circular economy concept. [ABSTRACT FROM AUTHOR]

It is important to classify academic papers in a fine-grained manner to uncover deeper implicit themes and semantics in papers for better semantic retrieval, paper recommendation, research trend prediction, topic analysis, and a series of other functions. Based on the ontology of the climate change domain, this study used an unsupervised approach to combine two methods, syntactic structure and semantic modeling, to build a framework of subject-indexing techniques for academic papers in the climate change domain. The framework automatically indexes a set of conceptual terms as research topics from the domain ontology by inputting the titles, abstracts and keywords of the papers using natural language processing techniques such as syntactic dependencies, text similarity calculation, pre-trained language models, semantic similarity calculation, and weighting factors such as word frequency statistics and graph path calculation. Finally, we evaluated the proposed method using the gold standard of manually annotated articles and demonstrated significant improvements over the other five alternative methods in terms of precision, recall and F1-score. Overall, the method proposed in this study is able to identify the research topics of academic papers more accurately, and also provides useful references for the application of domain ontologies and unsupervised data annotation. [ABSTRACT FROM AUTHOR]

The utilisation of hydrogen is being explored as a viable solution for reducing carbon emissions in port operations, with potential applications in cargo handling, transportation, and shipping vessel operations. To comprehensively list the decarbonisation options in ports, this study conducted a Systematic Literature Review to identify and then survey twelve highly cited review papers. Initially, a typology approach was used to categorise the decarbonisation options by activities and technologies. Subsequently, the study introduced a novel Port Energy Map to reveal the energy system pathways and their interconnections. Each pathway was then converted into a simpler linear sequence of activities, shown as a Port Energy System Taxonomy, which outlines the energy supply and energy-using activities. By utilising this taxonomy and map, the study identified opportunities and research gaps for integrating hydrogen technologies into port energy systems, which serves as a valuable tool for assessing port decarbonisation options. [ABSTRACT FROM AUTHOR]

The in-depth promotion of environmental pollution prevention and control is a must for China to move towards green development, and the effectiveness of urban environmental pollution control largely depends on the selection of these environmental policies and the synergistic application of these policies. This paper empirically tests three environmental policies' mixed and synergistic effects using Chinese urban data from 2000 to 2017. This study found that (1) the three environmental policies significantly curb urban environmental pollution and show synergistic effects. (2) The three types of environmental policies can have a superimposing effect by strengthening financial inputs and increasing environmental concern, as well as a complementary effect by improving the efficiency of environmental protection enforcement and the institutional environment. The synergy between the central environmental protection inspection policy and the environmental information disclosure policy is more of a superposition effect than a complementary effect due to the similarity of the policy objectives. (3) The synergistic effect of environmental policies is affected by factors such as the age of the principal officials and financial pressure. The younger the age of the principal officials and the cities with less financial pressure are more capable of utilizing the synergistic effect of environmental policies to form a situation where the market, the government, the public, and the enterprises work together to govern the city. This paper provides new ideas for exploring the synergies and mechanisms of environmental policies and theoretical references for the design, implementation, and effects of environmental policy portfolios in the 14th Five-Year Plan period. [ABSTRACT FROM AUTHOR]

The New Generation Productive Capacity Index (PCI) and the E-Government Development Index (EGDI) are increasingly used in various economies. Therefore, can e-government contribute to the continuous development of the new generation of productive capacity? Focusing on this important issue, this paper systematically examines the mechanism of the impact of e-government on the new generation of productive capacity and tests it using relevant data from major global economies. Firstly, this paper conducts regression analysis using the panel fixed-effects model, and the results show that e-government has a positive facilitating effect on the new generation of productive capacity. Secondly, the development of e-government will directly reduce the time, procedural, and monetary costs for enterprises and individuals to obtain government services, thereby promoting the development of production capacity. Finally, the specific changes in the structure of social expenditures are that government education expenditures and general expenditures will increase, but total government expenditures and household expenditures will not be affected by the construction of e-government. The research contribution of this paper is mainly reflected in the following three aspects: first, in terms of research perspectives, this paper extends the research on e-government's ability to improve the efficiency of governments and organizations in handling affairs and its impact on the productive capacity of a society. Second, it contributes to the theory on the topic of e-government. This paper proposes a general equilibrium model to reveal the impact of e-government construction on a government and the public, and to more comprehensively reveal the impact mechanism of e-government construction in the whole economy. Third, this paper contributes empirical evidence. This paper utilizes the data of the major economies around the world to reveal the mutual influence between the construction of e-government and the new generation of productive capacity, and then effectively proves the specific impact of e-government on governments, enterprises, and individuals through the test of cost mechanism and financial mechanism. Different from the existing literature, this paper focuses on the impact of e-government on the new generation of productive capacity, revealing that e-government construction does not increase the financial burden on governments but reduces the burden on firms and individuals, thus providing new insights into the productivity effects of e-government development. [ABSTRACT FROM AUTHOR]

Emissions originating from inland navigation should be reduced to achieve climate targets. This paper aims to identify (1) onboard GHG emission measurement systems, (2) calculation methods for GHG emissions of inland vessels and (3) reduction measures. A systematic literature review, examining 6 databases, yielded 105 initial outcomes, with 17 relevant references. The review reveals a scarcity of studies, with the majority concentrated in Europe and Asia, while North America, Africa, Australia, and South America remain largely unexplored. Four of the seventeen relevant studies focused on real-world GHG emissions measurement. Future research should explore more efficient and calibrated approaches for real-time CO2 insights in inland vessels. In the section on calculating GHG emissions, most papers attempt to adapt the EEDI or EEXI to inland navigation. Reduction measures for GHG emissions concentrate on alternative fuels, like LNG, methanol, hydrogen, or alternative power sources. As the research in this area is limited, prioritizing it in academic discourse is not only essential for advancing our understanding but also imperative for shaping a resilient and environmentally conscious future for inland navigation. [ABSTRACT FROM AUTHOR]

With the development of the healthcare industry, the demand for medical services and protective equipment is boosted, causing the generation rate of infectious medical waste to increase rapidly. Therefore, it is of utmost importance for decision makers to effectively predict the potential risks and propose corresponding solutions. This paper investigates the reverse logistics network optimization for medical waste under the conditions of an uncertain proposal demand. Firstly, a prediction model of medical waste based on the SEIR epidemiological dynamics is constructed, in which both routine and public health emergency scenarios are simultaneously considered. Secondly, a bi-objective location-routing optimization model for a medical waste reverse logistics network is proposed, by simultaneously optimizing the total economic cost and potential risk throughout the entire logistics process. Subsequently, an NSGA-II algorithm is designed for a model solution in response to the model's characteristics. The epidemiological dynamics-based prediction model is validated by the real case to be scientifically effective in predicting the amount of generated medical waste with a mean absolute percentage error (MAPE) of 18.08%. The constructed reverse logistics network model and the NSGA II algorithm provide a medical waste process center location, transportation routing, and vehicle selection solutions for both routine and emergency public health cases of Xi'an city with large, medium, and small scales. The above results indicate that the research scheme proposed in this paper could significantly reduce the medical waste logistics-related risks and costs and provide decision makers with more safe and reliable logistical solutions. [ABSTRACT FROM AUTHOR]

Sea level change, a consequence of climate change, poses a global threat with escalating impacts on coastal regions. Since 1880, global mean sea level has risen by 8–9 inches (21–24 cm), reaching a record high in 2021. Projections by NOAA suggest an additional 10–12-inch increase by 2050. This paper explores research methodologies for studying sea level change, focusing on Geographic Information System (GIS) techniques. GIS has become a powerful tool in sea level change research, allowing the integration of spatial data, coastal process modeling, and impact assessment. This paper sets the link with sustainability and reviews key factors influencing sea level change, such as thermal expansion and ice-mass loss, and examines how GIS is applied. It also highlights the importance of using different scenarios, like Representative Concentration Pathways (RCP), for accurate predictions. The paper discusses data sources, index variables like the Coastal Vulnerability Index, and GIS solutions for modeling sea level rise impacts. By synthesizing findings from previous research, it contributes to a better understanding of GIS methodologies in sea level change studies. This knowledge aids policymakers and researchers in developing strategies to address sea level change challenges and enhance coastal resilience. Furthermore, global analysis highlights the pivotal roles of the United States and China in sea level change (SLC) and GIS research. In the Gulf Cooperation Council (GCC) region, rising temperatures have substantial impacts on local sea levels and extreme weather events, particularly affecting vulnerable coastal areas. [ABSTRACT FROM AUTHOR]

Globally, the need for sustainable urban development has never been more urgent than it is now. This is because estimates indicate that more than half of the global population will be living in urban areas by 2050, with South Africa estimated at 80%. This paper focuses on socio-economic nuances that impede sustainable urban development, as well as the strategies that can accelerate sustainable and inclusive urban development in South Africa. Through a literature-review methodology, the analysis identified the following issues as impediments to sustainable urban development in South Africa: informality, lack of consultations with urban citizens, unresolved apartheid legacies, crime and insecurity, and migration intricacies in South Africa. The paper also establishes prospective strategies to accelerate sustainable urban development, such as working with informality and not against it, promoting inclusivity and access to resources, accelerating policy reforms, investing in rural towns, and investing in superior technology and innovation. These findings imply that there is a need to seek alternative development models and approaches, to address poverty, unemployment, and poor housing, aspects that negatively impact urban development planning and sustainable development. The paper recommends inclusive urban housing as a remedy to address the challenges of access, affordability, and the quality of housing facilities in urban areas. [ABSTRACT FROM AUTHOR]

Material flow analysis of plastics has attracted considerable attention for achieving sustainable production and consumption. However, the direct weights of each plastic have been analyzed alone, not considering the amount of natural resources as inputs for plastic production. Therefore, we analyzed the cradle-to-gate resource intensity of 21 types of plastics in terms of mining activity, using the total material requirement under the life cycle concept. It was found that the resource use for plastic production differs by up to approximately 10 times depending on the plastic type. By applying these findings to the material flow analysis of some countries and regions, we found that the quantity of natural resources was more than 20 times the original weight attributed to plastic production. By comparing resource use with greenhouse gas emissions, plastics with higher greenhouse gas emissions were found to have higher resource use, indicating a positive correlation, whereas the opposite trend was also found for some plastics. Considering plastic alternatives, we found that the quantity of natural resources in plastic-based shopping bags is nearly equivalent to that in paper-based bags, whereas that in plastic-based straws is greater than that in paper-based bags. Focusing only on the direct weight of plastic may mislead the decision-making process. [ABSTRACT FROM AUTHOR]

At present, three-dimensional laser scanners are used to scan subway shield tunnels and generate point cloud data as the basis for extracting a variety of information about tunnel defects. However, there are obstacles in the tunnel such as pipelines, tracks, and signaling systems that cause noise in the point cloud. Usually, the data of the tunnel point cloud are huge, and the efficiency of artificial denoising is low. Faced with this problem, based on the respective characteristics of the geometric shape and reflection intensity of the tunnel point cloud and their correlation, this paper proposes a tunnel point cloud denoising method. The method includes the following three parts: reflection intensity threshold denoising, joint shape and reflection intensity denoising, and shape denoising. Through the experiment on the single-ring segment point cloud of a shield tunnel, the method proposed in this paper takes 2 min to remove 99.77% of the noise in the point cloud. Compared with manual denoising, the method proposed in this paper takes two fifteenths of the time to achieve the same denoising effect. The method proposed in this paper meets the requirements of a tunnel point cloud data survey. Thus, it provides support for the efficient, accurate, and automatic daily maintenance and surveys of tunnels. [ABSTRACT FROM AUTHOR]

The main objective of this work is supporting the use of sustainable solutions for the management and reuse of agricultural waste from the cereal harvest, such as oats, barley, and triticale, making sheets of artisan paper, innovating the process with the use of different proportions of cellulose obtained from straw residues. The physical and mechanical properties of the obtained sheets showed that basis weight (66–96 g/m2), thickness (19–300 μm), burst strength (68.9–103.4 kPa), burst index (0.81–1.35 kPam2/g) and bulk (2.52–3.12 cm3/g), were adequate. Based on what can be observed in the SEM images, it is possible to infer that straw has the function of supporting the sheets using combinations of barley straw and recycled paper. The result of the IR analysis indicated that the sheet with an increase in hydroxyl groups was that obtained with barley straw. Therefore, the treatment was efficient. These results were corroborated by X-ray diffraction analysis, in which the percentage of crystallinity of the barley straw paper was 37.1%. Finally, the results obtained indicated that the crystallinity is better in the sheets containing large amounts of barley straw. The sheet with the highest percentage of crystallinity was that which was made using 100% of barley straw, showing a 37.1 percentage of crystallinity, followed by the sheet made of 100% recycled paper, having a value of 34.4%. [ABSTRACT FROM AUTHOR]

This editorial from the Sustainability Journal introduces a special issue focused on strategic management and organizational innovation for improving sustainability. The editorial emphasizes the importance of strategic innovation in business development, corporate value, and competitiveness. It also highlights the need for more research on the connection between strategic innovation and sustainability. The document provides an overview of the first five research papers in the special issue, covering topics such as the relationship between strategic innovation and sustainability, factors affecting sustainable development, innovation strategies in the Chinese household appliance sector, the impact of digital capabilities on subsidiary performance, and the combination of environmental, social, and governance management with organizational innovation from a digital leadership perspective. The summaries of these papers offer library patrons a glimpse into the research objectives, methodologies, and key findings of each study. [Extracted from the article]

Spatial accessibility is an essential manifestation of social equity and spatial planning. However, when examining spatial accessibility, systematic review studies dominate the literature, with fewer studies employing evaluative and relational bibliometric approaches. Thus, to provide a comprehensive overview of spatial accessibility research from 1999 to 2022, the works of literature referenced and analyzed by the Web of Science during 1999–2022 were analyzed: bibliometrics and scientific mapping methods using R software, the biblioshiny web program, tidyverse (ggplot2), and VOSviewer. The analysis results indicate a significant increase in the number of research papers addressing spatial accessibility throughout the research period accompanied by a continuous expansion of the research area. Collaboration and research endeavors among countries in this domain have deepened, leading to a continual improvement in the quality of papers. In addition, influential journals, authors, and articles in the field of spatial accessibility were also counted. New data, methods, and technology will become substantially more critical in accessibility research. [ABSTRACT FROM AUTHOR]

This paper proposes an electric vehicle routing problem, considers the states of charging stations and suggests solution strategies. The charging of electric vehicles is a main issue in the field of electric vehicle routing. There are many studies that find the locations of charging stations, recharging functions for the batteries of vehicles, and so on. However, the state of charging stations significantly affects the routes of electric vehicles, which is not much explored. The states may include open or closed charging stations, occupied or empty charging slots, and so on. This paper investigates how the states of charging stations are estimated and how routing strategies are determined. We formulate a mixed integer programming model and suggest how to solve the problem with an exact method. Numerical examples provide the optimal routing strategies of electric vehicles for the changing environments regarding the states of charging stations. [ABSTRACT FROM AUTHOR]

This research paper examines the spillover effect of ESG performance on green innovation behavior in companies within the same industry. The study specifically focuses on listed companies on the Shanghai Stock Exchange and Shenzhen Stock Exchange between 2011 and 2020. The results indicate that peer firms with superior environmental, social, and governance (ESG) performance have a notable and beneficial impact on the green innovation activities, quantities, and qualities of their counterparts. Significantly, this phenomenon is especially evident for the ecological (E) and societal (S) aspects of ESG performance when considering companies within the same industry. Additionally, according to our analysis, the association between peer firms' improved ESG performance and subsequent gains in green innovation activities is mediated by higher R&D expenditure and increased green consciousness. The robustness of these findings persists even after resolving issues of endogeneity through thorough testing. In addition, this paper finds that the spillover effects are more significant for non-state-owned firms, small-sized firms, firms with more analyst attention, firms in non-highly polluting industries, and when external environmental regulations are stronger. [ABSTRACT FROM AUTHOR]

With the popularization and practice of the concept of reduction development, how to accurately and comprehensively evaluate the high-quality development effect of the modern service industry has become crucial. This paper combines the concept of reduction development and high-quality development. According to the specific background of reduction development, this paper constructs the evaluation index system of high-quality development of the modern service industry in the context of reduction development from the four dimensions of total scale control, urban function strengthening, economic quality improvement and livable environment optimization and puts forward the evaluation model of high-quality development of the modern service industry based on the entropy weight TOPSIS method. Taking Beijing's modern service industry as an example, our empirical analysis showed that from 2008 to 2021, its high-quality development level showed a steady upward trend. The total scale has been effectively controlled, and the service industry has performed well in employment absorption. Scientific and technological innovation and cultural functions have developed significantly, but the level of openness needs to be improved. Economic quality maintained stable development, and the livable environment also showed a good development trend. [ABSTRACT FROM AUTHOR]

This paper examines the role of social research and communication methodologies in fostering substantive democratic participation and policy co-production within the context of urban regeneration initiatives anchored in the United Nations Sustainable Development Goals. This research critically analyzes the "becoming public" of sociology and social research in participatory design processes related to traditional urban planning instruments at the local scale (Regulatory Plans) in the Italian context, specifically through the case study of the Municipality of Appignano. It questions the role of sociology in activating a competent public sphere and promoting deliberative democracy at urban and territorial design levels and whether we can identify the traits of public sociology in facilitating the different stages of these processes. This paper details a participatory process in Appignano that sought to innovate urban regeneration within complex legislative frameworks, emphasizing community engagement and interdisciplinary approaches. The findings reveal a community actively participating in the regeneration process, demonstrating a high level of agreement on various urban development strategies aimed at sustainability. This study underscores the capacity of public sociology to facilitate public debate and democratic dialogue and suggests that such participatory approaches can significantly contribute to sustainable and resilient urban development, highlighting the potential of sociology as a moral and political force in urban planning. [ABSTRACT FROM AUTHOR]

This paper addresses the necessity of adopting renewable energy technologies in order to achieve sustainable development goals in light of increasing global challenges, with a particular focus on the current generation's well-being. It addresses the potential impacts of global crises, such as energy and food crises, on the transition to renewable energy. Using a descriptive and analytical approach, this paper examines the environmental and economic costs and benefits of renewable energy as well as the commitment of oil-producing countries to international environmental treaties. The research utilises an econometric model to analyse the relationship between sustainable development goals and global challenges. Data from the United Nations Conference on Trade and Development and the International Renewable Energy Agency are used to inform the analysis. The findings showed that the rights and well-being of current generations are currently maintained by the persistent use of fossil fuels in oil-producing nations. Fossil fuels continue to be, and may likely remain, the primary energy source in various sectors of development, despite their significant contribution to environmental and climate issues. The paper offers insights and recommendations for policymakers seeking to determine when government spending should best be allocated to renewable energy technologies, balancing national economic interests with international agreements. [ABSTRACT FROM AUTHOR]

One way to achieve energy efficiency in the workplace is to change employee behaviour. Research in this area is limited, and significant gaps remain in understanding differences in how energy is used within workplaces and the suitability of existing frameworks for application in workplace settings. This paper addresses these gaps by applying and further developing the interdisciplinary energy culture framework (ECF) to examine employee energy use in an industrial workplace with an office and manufacturing areas. A mixed methods approach consisting of surveys, a focus group and interviews is applied. Results show significant differences in the office and manufacturing areas, with office areas having a more energy-efficient energy culture. Qualitative results show differences exist due to organizational behaviours, such as the effectiveness of business communications methods, varying levels of investment, the physical environment and work tasks. Results also show external influences, such as government budgets, business structure, and wider organisational cultures, impact energy cultures and how energy is used. This paper proposes modifications to the ECF, which acknowledges the multi-scalar nature of workplace energy cultures. This paper demonstrates how the ECF can be applied to workplace settings, allowing further understanding of how energy is used, and identifying wider organizational, occupational, and individual psychological influences on energy use. [ABSTRACT FROM AUTHOR]

This study investigated how entrepreneurship can reshape resource-based countries such as Qatar into more diverse, sustainable, and knowledge-driven economies. By integrating both exploratory and quantitative research methods, it closely examines how various elements, including government policies, societal values, financial aids, and technological advancements, interact to influence entrepreneurial success. A significant part of the research involves a survey design based on initial qualitative research from a previous study to test the effectiveness of these strategic suggestions. This paper presents targeted recommendations for stakeholders to enhance entrepreneurship education, streamline business regulations, and introduce a national entrepreneurship zone (ENT-Q) facilitated by a digital platform (Ryadah). These steps aim to improve the entrepreneurial environment significantly, making it easier to access crucial business information, support small businesses through dedicated funds, and shift towards a diversified and knowledge-based economy. The anticipated result is better policymaking in entrepreneurship, increased entrepreneurial activity and success, and a move away from reliance on traditional oil and gas sectors. By offering a detailed plan for promoting entrepreneurship in resource-rich settings, this paper contributes valuable insights into economic diversification and sustainable development, providing actionable strategies that can be adapted to similar economies worldwide in a manner that is more accessible and understandable. [ABSTRACT FROM AUTHOR]