Search

Filter cloth brush-coating (FCBC), using soft filter cloth as a brush-coating medium, in conjunction with viscous silver nanowire (AgNW) conductive solution, is used to prepare AgNW conductive films. The density and uniformity of AgNWs deposited on the substrate are controlled by the interplay between the filter cloth aperture, the conductive solution viscosity, and the brush-coating speed. Further, with appropriate AgNW concentration and flow rate, uniform AgNW transparent conductive film with sheet resistance of 18 Ω sq−1 and transmittance of 94% at 550 nm is acquired by FCBC. Due to the precise control of the coating process in FCBC, large-area uniform AgNW conductive film fabricated on printing paper has a low non-uniformity factor of 1.2% at a sheet resistance of 19.0 Ω sq−1. The resultant paper-based AgNW film heater shows sensitive and stable heating performance. FCBC shows great potential in producing large-area uniform AgNW films on various substrates. [ABSTRACT FROM AUTHOR]

Encouraged by the goal of achieving net-zero carbon emission by 2050, the exploration of insulating material becomes one of the core projects to the electrical equipment innovations. The rise of composites enables the insulating material to be endowed with more functions. By this concern, adopting the coupling agents is one of the effective methods to improve the compatibility of composites, which highly strengthens the desired properties. The functional groups of coupling agents, nevertheless, could not always show a positive impact to access enhanced properties. In this work, four types of silane coupling agents including amino-propyl, glycidyletheroxy-propyl (GP), vinyl, and methacryloxy-propyl functional groups are employed to modify the aluminum nitride (AlN) fillers, and the modification effects on the insulating and thermal conductivity of the AlN/poly(m-phenylenedicarbonyl-m-phenylenediamine) (PMIA) composite paper are systematically investigated and compared. The results show that a proper coupling agent is beneficial to the uniform dispersion of the inorganic filler in the organic matrix and highly contributes to their interface quality, where the heat transfer path is established that boosts the heat dissipation. By tailoring the trap depth and density toward deeper and higher, the carrier transport is highly confined which enhances the breakdown strength to a large extent. Therefore, high breakdown strength and thermal conductivity of 182.9 kV mm−1 and 0.302 W (m·K)−1, respectively, are achieved in the GP modified AlN/PMIA paper, which are 16.7% and 167.4% higher than that of pure PMIA paper. [ABSTRACT FROM AUTHOR]

Recent progress in the in situ synthesise of various nanomaterials has gained tremendous interest and wide applications in various fields. For the first time to the best of our knowledge, this work reports a methodology of ultra-fast in situ synthesis of cobalt–cobalt oxide-reduced graphene oxide (Co−Co3O4−rGO (CC–rGO)) composite by laser ablation. The photothermal reduction technique was leveraged to develop the CC–rGO. For this, a low-cost 450 nm blue diode laser was irradiated onto a grade 1 filter paper in the presence of cobalt ions readily patterns the carbon matrix of paper to the composite material. Moreover, the variation of cobalt concentrations from 0.1–0.5 M led to structural and morphological changes. Standard techniques were adopted for thorough characterizations of developed sensor material for conductivity analysis, specific surface area, crystal-structural information, surface morphology, and chemical composition. The observed results were highly promoting towards the electrochemical sensing applications. Further, the developed sensor was found to be highly selective toward detecting a vital bio analyte alkaline phosphatase (ALP). The sensors performance was highly significant in the linear range of 10–800 mU l−1 with a detection limit of 10.13 mU l−1. The sensors applicability was further validated in actual human serum samples via a recovery-based approach. In the future, the developed in situ material methodology can begin a rapid composite material synthesis at a larger scale. [ABSTRACT FROM AUTHOR]

We report for the first time MoS2/CNT hybrid nanostructures for memristor applications on flexible and bio-degradable cellulose paper. In our approach, we varied two different weight percentages (10% and 20%) of CNT's in MoS2 to improve the MoS2 conductivity and investigate the memristor device characteristics. The device with 10% CNT shows a low V SET voltage of 2.5 V, which is comparatively small for planar devices geometries. The device exhibits a long data retention time and cyclic current–voltage stability of ∼104 s and 102 cycles, making it a potential candidate in flexible painted electronics. Along with good electrical performance, it also demonstrates a high mechanical stability for 1000 bending cycles. The conduction mechanism in the MoS2-CNT hybrid structure is corroborated by percolation and defect-induced filament formation. Additionally, the device displays synaptic plasticity performance, simulating potentiation and depression processes. Furthermore, such flexible and biodegradable cellulose-based paper electronics may pave the way to address the environmental pollution caused by electronic waste in the near future. [ABSTRACT FROM AUTHOR]

We developed new teaching materials, electrical resistors and capacitors, using carbon nanotube (CNT) paper and carbon fibre (CF) paper to foster students' creative thinking, thereby deepening and extending learning. Using a CNT-paper electrical resistor, it is possible to elucidate the dependence of the resistance value on the length and width. The resistance value is proportional to the length and inversely proportional to the width of the paper. In the case of the CF-paper capacitor, it is also possible to clarify the dependence of the capacitance value on the area and the distance between papers. The capacitance value is proportional to the areas of the papers and inversely proportional to the distance between them. Based on the results of our experiments using the new teaching materials, we confirmed that the measured values were in good agreement with the values predicted by theoretical calculations. Using these materials, it becomes possible for students to visually and actively learn about electrical resistance and capacitance through experiments by themselves and in discussion with other students, in contrast to the traditional teaching methods practiced in many schools worldwide. We found that teaching methods using these materials are a useful and easy way to teach the basic concepts of resistance and capacitance with geometric factors in classrooms. [ABSTRACT FROM AUTHOR]

High-performance electronics demand extremely sensitive piezo-resistive sensors with important features such as low-fabrication cost, easy implementation, low power consumption and high-pressure sensitivity over broad pressure range. Herein, we report a flexible piezo-resistive paper-based device functionalised by WSe2 nanosheets. An efficient and low-cost fabrication strategy using Whatman filter paper and tissue paper is adopted for versatile sensing applications. The WSe2 nanosheets were synthesized by high-yield and size-controlled liquid phase exfoliation technique. The flexible WSe2 nanosheets-paper sensor shows excellent response in broad pressure range of 1 Pa–100 kPa with exceptionally high sensitivity of 29.24 kPa−1, current responsivity of 70 and response time of 100 ms. The pressure sensor is also employed to recognize the pressure generated due to finger tapping. Encouragingly, the piezo-resistive sensors can also sense extremely small pressure differences of about 1.4 Pa generated by water drops. [ABSTRACT FROM AUTHOR]

We introduce and study the spatial replicator equation with higher order interactions and both infinite (spatially homogeneous) populations and finite (spatially inhomogeneous) populations. We show that in the special case of three strategies (rock–paper–scissors) higher order interaction terms allow travelling waves to emerge in non-declining finite populations. We show that these travelling waves arise from diffusion stabilisation of an unstable interior equilibrium point that is present in the aspatial dynamics. Based on these observations and prior results, we offer two conjectures whose proofs would fully generalise our results to all odd cyclic games, both with and without higher order interactions, assuming a spatial replicator dynamic. Intriguingly, these generalisations for N ⩾ 5 strategies seem to require declining populations, as we show in our discussion. [ABSTRACT FROM AUTHOR]

As a key component of electronic skins, flexible pressure sensors have attracted more and more attention because of the increasingly growing demand. Stability is a key parameter to evaluate pressure sensors, while relatively few reports have focused on it. Here, a paper-based piezoresistive sensor is developed, in which, the airlaid paper based sensing layer is modified with silver nanowires (AgNWs) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and sandwiched in between two convex electrodes. Due to the cross bonding of PEDOT:PSS membrane, the conductive paths of AgNWs networks are strengthened and stabilized, thus the stability of the sensor is found to be significantly improved. Besides, to regulate the compressibility by varying sensing layers, the performance of the proposed sensor can be further improved, and its practical application performances in healthcare pulse monitoring, tiny muscle motion, and voice recognition are demonstrated. The results confirm that PEDOT:PSS has the potential as stabilization media to AgNWs for paper-based flexible wearable electronics. [ABSTRACT FROM AUTHOR]

In this study, a novel paper biosensor based on Fe3O4@SiO2–NH2 magnetic polymer microspheres and multi walled carbon nanotubes (MWCNTs) for rapid detection of pseudorabies virus (PRV) was first developed. Fe3O4@SiO2–NH2 were functionalized with PRV antibody and doped in cellulose nitrate paper to fabricate the magnetic paper biosensor with good magnetic response and biocompatibility. Using MWCNTs to build conductive network of sensors, PRV antigen binds specifically to the immunomagnetic microspheres on the sensor, and the resulting immune complex changes the magnetic domain structure of the sensor and the structural gap of MWCNTs, causing the magnetic property and impedance change. TEM and EDS characterization proved that the biosensor was successfully doped with Fe3O4@SiO2–NH2 and effectively recognized PRV. Under optimized conditions, the impedance variation was found to be linearly related to the logarithm value of PRV concentrations in the range of 10–1 mg ml−1, with the detection limit of 10 ng ml−1. This paper biosensor demonstrated advantages of portability, high sensitivity and specificity, providing a valuable method for early control of PRV. [ABSTRACT FROM AUTHOR]

In my previous article (Temiz B K 2020 Phys. Educ. 55 027002), I demonstrated that images on a screen covered with paper are seen clearly when the paper is close to the screen but become blurry when the paper is moved away. I wanted you, the readers, to find the reason behind this phenomenon. In this study, I aim to give the answer to this question. [ABSTRACT FROM AUTHOR]

This paper presents the integration process of an ultra-thin PZT/Si chip on paper and that it functions as a simple speaker by applying a voltage in the audible frequency range. The PZT/Si chip used is only 5 μm thick, so it does not interfere with the flexibility of the substrate, and it can be integrated on paper because it does not use a high-temperature process in the electrode connection process. We have revealed that a paper with an ultra-thin PZT/Si chip of only 1 × 5 mm2 in size generates a fully audible sound pressure level (SPL) of about 40 dB. It was rounded to a radius of curvature of 1 cm without breaking. The overall SPL was about the same even when the paper substrate dimension was reduced to 50 mm square. This technology is expected to be applied to electronic components such as surround speakers or haptics in electronic paper. [ABSTRACT FROM AUTHOR]

Surface-enhanced Raman spectroscopy (SERS) is a unique technique that allows us to detect samples in trace quantities. The spectral intensities of the characteristic Raman peaks of the analyte molecule are enhanced manifold in the presence of noble metal nanoparticles (NPs). The existence of NPs is necessary to couple the incident electromagnetic field with NPs through the localized surface plasmon resonance phenomenon, which primarily contributes to the enhancement of an SERS signal. The present work demonstrates the working of a paper-based SERS substrate to detect and quantify two pharmaceutical drugsâ€"paracetamol and aspirinâ€"in water. The proposed SERS substrate was obtained by drop-casting silver NPs over printing grade 100 grams per square meter (GSM) paper. 100 GSM denotes the class of paper where 100 grams of raw materials (cellulose) is used per square meter to manufacture the paper. The performance of the designed SERS substrate was initially evaluated with two Raman active samplesâ€"malachite green and rhodamine-6G. The applicability of the proposed SERS substrate was evaluated further through monitoring the Raman spectra of the two aforementioned pharmaceutical drugs in different field-collected water samples, thus establishing the reliability of the scheme in a real field environment. [ABSTRACT FROM AUTHOR]