Search

This survey paper explores the cybersecurity certification requirements defined by the SunSpec Alliance for Distributed Energy Resource (DER) devices, focusing on aspects such as software updates, device communications, authentication mechanisms, device security, logging, and test procedures. The SunSpec cybersecurity standards mandate support for remote and automated software updates, secure communication protocols, stringent authentication practices, and robust logging mechanisms to ensure operational integrity. Furthermore, the paper discusses the implementation of the SAE J3072 standard using the IEEE 2030.5 protocol, emphasizing the secure interactions between electric vehicle supply equipment (EVSE) and plug-in electric vehicles (PEVs) for functionalities like vehicle-to-grid (V2G) capabilities. This research also examines the SunSpec Modbus standard, which enhances the interoperability among DER system components, facilitating compliance with grid interconnection standards. This paper also analyzes the existing SunSpec Device Information Models, which standardize data exchange formats for DER systems across communication interfaces. Finally, this paper concludes with a detailed discussion of the energy storage cybersecurity specification and the blockchain cybersecurity requirements as proposed by SunSpec Alliance. [ABSTRACT FROM AUTHOR]

Integrating electric vehicles (EVs) into the coupled power distribution network (PDN) and transportation network (TN) presents substantial challenges. This paper explores three key areas in EV integration: charging/discharging scheduling, charging navigation, and charging station planning. First, the paper discusses the features and importance of EV integrated traffic–power networks. Then, it examines key factors influencing EV strategy, such as user behavior, charging preferences, and battery performance. Next, the study establishes an EV charging and discharging model, with particular emphasis on the complexities introduced by factors such as pricing mechanisms and integration approaches. Furthermore, the charging navigation model and the role of real-time traffic information are discussed. Additionally, the paper highlights the importance of multi-type charging stations and the impact of uncertainty on charging station planning. The paper concludes by identifying significant challenges and potential opportunities for EV integration. Future research should focus on enhancing coupled network modeling, refining user behavior models, developing incentive pricing mechanisms, and advancing autonomous driving and automated charging technologies. Such efforts will be essential for achieving a sustainable and efficient EV ecosystem. [ABSTRACT FROM AUTHOR]

The thermal performance of a lithium-ion battery pack for an electric vehicle by adding straight rib turbulators in battery cooling plate channels has been numerically investigated in this paper and the numerical model of the battery pack has been validated by experimental data, which exhibits a satisfactory prediction accuracy. The effects of rib shapes, rib angles, rib spacings, and irregular gradient rib arrangement configurations on the flow and heat transfer behaviors of battery pack cooling plates have been thoroughly explored and analyzed in this paper. In addition, the thermal performance of the ribbed battery cooling plates was examined at actual high-speed climbing and low-temperature heating operating conditions. The results indicate that compared to the original smooth cooling plate, the square-ribbed battery cooling plate with a 60° angle and 5 mm spacing reduced the maximum battery temperature by 0.3 °C, but increased the cross-sectional temperature difference by 0.357 °C. To address this issue, a gradient rib arrangement was proposed, which slightly reduced the maximum battery temperature and lowered the cross-sectional temperature difference by 0.445 °C, significantly improving temperature uniformity. The thermal performance of the battery thermal management system with this gradient rib configuration meets the requirements for typical electric vehicle operating conditions, such as high-speed climbing and low-temperature heating conditions. [ABSTRACT FROM AUTHOR]

Electric vehicles (EVs) are pivotal in addressing the escalating environmental crisis. While EV drivetrains excel compared to those of vehicles with internal combustion engines (ICEs), their energy storage systems are hampered by limited range, lifespan, and lengthy charging times. Hybrid energy storage systems (HESSs) present a viable current solution to these issues. This review thoroughly explores the state of the art in the emerging field of multisource EVs that utilize HESSs, incorporating any combination of batteries (BTs), supercapacitors (SCs), flywheels (FWs), fuel cells (FCs), and/or transmotors. In addition, the paper systematically categorizes and evaluates different hybrid configurations, detailing potential topologies and their respective advantages and limitations. Moreover, the paper examines diverse control algorithms used to manage these complex systems, focusing on their effectiveness and operational efficiency. By identifying current research gaps and technological challenges, this study aims to delineate future research directions that could enhance the deployment and optimization of multisource EVs, thereby addressing critical challenges such as energy density, system reliability, and cost-effectiveness. [ABSTRACT FROM AUTHOR]

This investigation is part of a topical situation where wireless equipment is gradually being used for energy transfer, particularly for autonomous systems and the use of decarbonized energies. A characteristic example of decarbonized autonomous use is linked to the substitution of thermal engine vehicles for electric vehicles (EVs) equipped with energy storage batteries. This response was considered in an ecological context of reducing air pollution and defending planetary biodiversity, which are currently vital. These EVs ultimately operate thanks to the wireless charging of their batteries when stationary or running. By changing long-established means of transport that have become a threat to biodiversity, it is necessary to ensure that innovative replacement solutions protect this biodiversity. In addition, the construction of wireless power transfer (WPT) battery chargers for these EVs must offer an optimal ecology of clean energy saving. In such a context, the two concepts of One Health (OH) and Responsible Attitude (RA) will find their place in the design and control of WPT tools in EVs. This contribution aims to illustrate and analyze the roles of the green and non-wasteful OH and RA approaches in the design and control of WPT embedded in EVs for the smart city (SC) environment. In the paper, WPT tools are first introduced. The design and control of EV battery charging tools are then examined. The biological effects on living tissues due to the electromagnetic field (EMF) radiation of WPT are analyzed. The phenomena and equations governing the design of WPT and the effects of EMF radiation are then exposed. The OH and RA approaches in the SC context are afterward analyzed. The protection against the unsafe effects of WPT tools in the SC environment is consequently explored. The analyses followed in the paper are supported by examples from the literature. The explorations proposed in this contribution have made it possible to highlight certain notions, allowing a more in-depth understanding of the use of EVs with WPT rechargeable batteries for SCs. Thus, the analysis and fusion of these topics are at the heart of this contribution. [ABSTRACT FROM AUTHOR]

In order to achieve low carbon emissions in the power grid, the impact of new energy grid connections on the power grid should be reduced, as well as the peak-to-valley load difference caused by large-scale electric vehicle grid connections. This paper proposes a two-tier, low-carbon optimal dispatch master–slave game model involving virtual power plant operators as well as electric vehicle operators. Firstly, the carbon flow is tracked based on the proportional sharing principle, and the carbon emission factor during the charging and discharging process of electric vehicles is calculated. Secondly, the node carbon potential and time-sharing tariff are used to guide and change the charging behaviour of electric vehicles and to construct a master–slave game model for low-carbon optimal scheduling with the participation of multiple subjects, with economic scheduling at the upper level of the model and demand response scheduling at the lower level. Finally, the IEEE30 node system is used as an example to verify that the method adopted in this paper can effectively reduce the peak-to-valley difference of loads, reduce the carbon emissions of the grid, and reduce the cost of each participating entity. [ABSTRACT FROM AUTHOR]

This paper deals with the mitigation of magnetic field levels produced by a wireless power transfer (WPT) system to recharge the battery of an electric vehicle (EV). In this work, an array of active coils surrounding the WPT coils is proposed as a mitigation technique. The theory and new methodological aspects are the focus of the paper. Magnetic field levels in the environment are calculated numerically without and with the presence of an array of active coils in a stationary WPT system for automotive applications. By the proposed mitigation method, the field levels beside the vehicle are significantly reduced and comply with the reference levels (RLs) of the ICNIRP 2010 guidelines for human exposure to electromagnetic fields and the magnetic flux density limits proposed by ISO 14117 for electromagnetic interference (EMI) in cardiac implantable electronic devices (CIEDs). [ABSTRACT FROM AUTHOR]

The topic of electric vehicles is currently generating significant interest worldwide. They are beneficial for the environment as they save up fuel, reduce pollution and carbon footprint too, but their market consumption is at the nascent level. The demand for these electric vehicles in developing countries is currently very slow and not that steady. The importance of Electric Vehicles (EVs) in the upcoming future is high and so it is crucial to figure out why these EVs are not being sold as much as we expect them in the market today. This paper tries to find out the multiple reasons why these vehicles are not in high demand, and why their counterparts, gasoline-fuelled vehicles are more in demand in the market. This paper discusses, after reviewing multiple other papers, why the consumption of EVs is low. Why their market demand is not where it should be and also multiple other facets. Finally, the paper finds that reasons like higher costs and low government incentives among multiple others are some factors leading to a low market demand for EVs. Also, the paper discusses the future scope of these EVs and how we can increase their consumption in the market. [ABSTRACT FROM AUTHOR]

The integration of the Internet of Things (IoT) with renewable energy technologies is revolutionizing modern power systems by enhancing efficiency, reliability, and sustainability. This paper examines the role of the IoT in optimizing the integration and management of renewable energy sources, such as solar and wind power, into the electrical grid. The IoT enables real-time monitoring, data analysis, and automation, facilitating advanced load management, demand response, and energy storage solutions. Key advancements in IoT technologies, including smart grids and energy management systems, are discussed, highlighting their impact on improving grid stability and promoting the use of renewable energy. The paper also finds some challenges such as data security, privacy, and the need for standardized communication protocols. Furthermore, it finds how the IoT optimizes electric vehicle performance through advanced battery management, real-time energy consumption monitoring, and improved interaction with the electrical grid. Future research directions emphasize the potential of the IoT to further enhance renewable energy integration through artificial intelligence and machine learning, driving the transition towards a more sustainable and resilient energy future. [ABSTRACT FROM AUTHOR]

For a segmented dynamic wireless power transfer (DWPT) system, when electric vehicles (EVs) move over two adjacent transmitting coils, the received power fluctuates greatly and has some loss. Arming at this problem, this paper proposes a dual receiver segmented DWPT topology to reduce the received power fluctuation of the receiving coil passing through the rail junction during the moving process of the EV. Through magnetic field analysis in this paper, tuning the current phase difference between two adjacent transmitting coils to 180° can enhance the magnetic field. In this paper, a dual receiver series topology (DRST) is designed to pick up power, which consists of four fully controlled components and four diodes. According to EVs' real-time position, the segment DWPT system has three working modes and six working states under the control of DRST. Finally, experiments are carried out. Compared to the single-receiving-coil system, DRST is effective in improving the average output power from 2.007 to 5.657 W and significantly reducing the power fluctuation. [ABSTRACT FROM AUTHOR]

This paper introduces and underscores the automation of the E-vehicle charging process through optimization between the grid and the vehicle, incorporating real-time constraints in the charging and discharging processes. With the surge in E-vehicle usage and heightened electricity demand, automating the vehicle battery charging process becomes imperative to mitigate its impact on the grid. The research outlined in this paper focuses on automating electric vehicle charging and discharging based on real-time power demand considerations. The automation process, facilitated through a connection to the power grid, is managed by the interconnected network and algorithm-based monitoring of real-time parameters. These parameters include power, voltage, state of charge of the battery, charging cost, grid load demand, distance from the grid to the vehicle and vehicle demand. The actor-critic algorithm serves as a guide for electric vehicle charging automation, aligning with vehicle-specific data such as charging cost, vehicle demand, and grid demand to assess switching responses and enhance result accuracy. Load variations in real and reactive power for different configurations—domestic, industrial, and vehicle connections to the grid—throughout the day are considered using the IEEE 33 standard bus system. Frequency analysis of vehicle charging, grid stability analysis, and evaluation of voltage sag and swell during faulty conditions are conducted with MATLAB and the IEEE 33 standard bus system. The results provide insights into the switching time for the charging process based on algorithmic guidelines, ensuring the process follows the correct trajectory. The study demonstrates that charging time and cost are directly proportional to demand, even in time-varying processes. In the course of this research, an embedded hardware prototype model was developed to implement the proposed concept of E-vehicle charging automation. [ABSTRACT FROM AUTHOR]

Dielectric capacitors are commonly used in electronic and electric power systems due to their excellent charging and discharging rates and ultra-high power densities. Especially, with the rapid development of new energy vehicles industry, high-temperature films capacitors are urgently needed, while the conductivity loss of polymer capacitive films at high temperatures sharply increases, which should be significantly suppressed for achieving excellent energy storage performance. This paper presents a composite film with polyetherimide (PEI) as the matrix, and core-shell structured particle ceramic as fillers where high polarization of barium strontium titanate (BaSrTiO 3) as the core and excellent insulation strength of alumina (Al 2 O 3) as the shell, respectively, achieving a synergistic enhancement of breakdown strength and dielectric constant of Al 2 O 3 @BaSrTiO 3 /PEI composite film. More importantly, the Al 2 O 3 layer with moderate dielectric constant can effectively relieves the electric field distortion at the interfacial regions due to the large difference between BaSrTiO 3 fillers and PEI matrix. The composite film demonstrates exceptional thermal and cycling stability, as well as energy storage properties within the studied temperature range, a discharge energy density of 4.67 J/cm3 at 150 °C. The enhanced mechanism of energy storage performance is revealed bycomparatively analyzing of the microstructure and dielectric properties of BaSrTiO 3 /PEI, Al 2 O 3 /PEI, and Al 2 O 3 @BaSrTiO 3 /PEI composite films. This paper presents a modification strategy of inorganic/organic composite films by increasing both of dielectric constant and electric breakdown strength at elevated temperature. [ABSTRACT FROM AUTHOR]

Climate change risks have triggered the international community to find efficient solutions to reduce greenhouse gas (GHG) emissions mainly produced by the energy, industrial, and transportation sectors. The problem can be significantly tackled by promoting electric vehicles (EVs) to be the dominant technology in the transportation sector. Accordingly, there is a pressing need to increase the scale of EV penetration, which requires simplifying the manufacturing process, increasing the training level of maintenance personnel, securing the necessary supply chains, and, importantly, developing the charging infrastructure. A new modular trend in EV manufacturing is being explored and tested by several large automotive companies, mainly in the USA, the European Union, and China. This modular manufacturing platform paves the way for standardised manufacturing and assembly of EVs when standard scalable units are used to build EVs at different power scales, ranging from small light-duty vehicles to large electric buses and trucks. In this context, modularising EV electric systems needs to be considered to prepare for the next EV generation. This paper reviews the main modular topologies presented in the literature in the context of EV systems. This paper summarises the most promising topologies in terms of modularised battery connections, propulsion systems focusing on inverters and rectifiers, modular cascaded EV machines, and modular charging systems. [ABSTRACT FROM AUTHOR]

This paper summarizes the results of numerous studies aimed at improving the operating characteristics of electric motors used in light electric vehicles (LEVs). This review focuses on four types of electric motors that can be installed in the drive wheel rims of LEVs. Due to the availability of new magnetic materials and the use of advanced techniques for optimizing the design of electric motors, new motor topologies have emerged. The latest generation motors have been shown to be more efficient, have higher torque density, and generate less torque ripple. This paper indicates and discusses current trends in the topology of electric motors designed for LEV drives. In this context, the effectiveness of the proposed design modifications in terms of selected motor operational characteristics was assessed. The proposed new topologies were compared with commercial solutions, also in terms of the possibility of improving their operational parameters. [ABSTRACT FROM AUTHOR]

This paper introduces a novel approach for rapidly balancing lithium-ion batteries using a single DC–DC converter, enabling direct energy transfer between high- and low-voltage cells. Utilizing relays for cell pair selection ensures cost-effectiveness in the switch network. The control system integrates a battery-monitoring IC and an MCU to oversee cell voltage and ensure battery protection. A prototype circuit with twelve lithium-ion batteries demonstrates the method's efficacy, achieving a remarkable balancing time of 48 min during charging with a maximum efficiency of 89.85%. Comparative analysis with other methods underscores the superior performance of the proposed balancing circuit in terms of balancing time and implementation cost. Furthermore, this paper delves into hardware aspects of battery management systems (BMSs) for electric vehicles and stationary applications. It offers an overview of prevailing concepts in state-of-the-art systems, aiding readers in assessing considerations essential for BMS design in various applications. The discussion includes examples of battery packs sourced from commercially available electric vehicles. Subsequently, the manuscript addresses implementation aspects concerning the measurement of critical physical variables such as voltage, current, and temperature, alongside balancing strategies. [ABSTRACT FROM AUTHOR]

One of the main issues in power systems relates to scheduling of energy resources. With the ever-increasing penetration of renewable energies with intermittent power output, this issue has turned into an even more significant problem. Renewable energy sources (RESs) have captured attention due to their low environmental emission and also low running cost. One drawback that may be brought into power systems is the surplus power generation by such generation technologies that should be carefully addressed in power system-related problems. This paper proposes the unscented transform modeling to consider the stochastic behavior of charge and discharge of EVs, random performance of photovoltaic, load demand and wind turbine systems. Due to the unpredictable nature of solar and wind power outputs, as well as plug-in electric vehicle owners' behavior when supplying or receiving power from the grid, a stochastic programming-based approach is proposed to operate microgrids in grid-connected configuration mode. The integration of vehicle to grid (V2G) has a good ability to minimize the operating cost of the MG. An integrated optimization model is presented in this study for optimal operation of the MG with high penetration of PEVs and RESs. Modified sunflower optimization algorithm (MSFO) algorithm is applied in this paper to address the optimization problem. The single-objective stochastic optimization is used for minimizing the total operating cost over the day taking into consideration the uncertainties due to the RESs' power output intermittency, including wind speed and solar irradiance and load demand forecast error. Several case studies are taken into account to show the efficiency of the optimal operation with PEVs. [ABSTRACT FROM AUTHOR]

This paper presents a review of the most common power converters and torque ripple minimisation approaches for switched reluctance motors (SRMs). Unlike conventional three-phase AC motors, namely squirrel cage induction motors and permanent magnet synchronous motors, which require a typical three-phase inverter for operation, the switched reluctance motor requires a different topology power converter for reliable and efficient operation. In addition, due to the non-linear, discrete nature of SRM torque production, torque ripple is severely pronounced, which is undesirable in servo applications like electric vehicles. Hence, deploying a proper torque control function for smooth and quiet motor operation is crucial. This paper sheds light over the most popular SRM power converters as well as torque ripple minimisation methods, and it suggests an optimal SRM drive topology for EV applications. [ABSTRACT FROM AUTHOR]

This paper presents a groundbreaking control strategy for a bidirectional battery charger that allows power to be injected into the smart grid while simultaneously compensating for the grid's reactive power using an electric vehicle battery. An artificial neural network (ANN) controller is utilized for precise design to ensure optimal performance with minimal error. The ANN technique is applied to generate sinusoidal pulse width modulation (SPWM) for a bidirectional AC–DC inverter, with the entire algorithm simulated in MATLAB Simulink.The core innovation of this study is the creation of the ANN algorithm, which supports grid compensation using electric vehicle batteries, an approach termed "vehicle-for-grid". Additionally, the paper details the PCB circuit design of the system controlled by the DSP F28379D board, which was tested on a three-phase motor. The total harmonic distortion (THD) of the proposed ANN algorithm is approximately 1.85 % , compared to the MPC algorithm's THD of about 2.85 % . This indicates that the proposed algorithm is more effective in terms of the quality of the power injected into the grid. Furthermore, it demonstrates effective grid compensation, with the reactive power effectively neutralized to 0 KVAR in the vehicle-for-grid mode. [ABSTRACT FROM AUTHOR]

The number of individuals wearing cardiac pacemakers is gradually increasing as the population ages and cardiovascular disease becomes highly prevalent. The safety of pacemaker wearers is of significant concern because they must ensure that the device properly functions in various life scenarios. Electric vehicles have become one of the most frequently used travel tools due to the gradual promotion of low-carbon travel policies in various countries. The electromagnetic environment inside the vehicle is highly complex during driving due to the integration of numerous high-power electrical devices inside the vehicle. In order to ensure the safety of this group, the paper takes passengers wearing cardiac pacemakers as the object and the electric vehicle drive motors as the exposure source. Calculation models, with the vehicle body, human body, heart, and cardiac pacemaker, are built. The induced electric field, specific absorption rate, and temperature changes in the passenger's body and heart are calculated by using the finite element method. Results show that the maximum value of the induced electric field of the passenger occurs at the ankle of the body, which is 60.3 mV/m. The value of the induced electric field of the heart is greater than that of the human trunk, and the maximum value (283 mV/m) is around the pacemaker electrode. The maximum specific absorption rate of the human body is 1.08 × 10−6 W/kg, and that of heart positioned near the electrode is 2.76 × 10−5 W/kg. In addition, the maximum temperature increases of the human torso, heart, and pacemaker are 0.16 × 10−5 °C, 0.4 × 10−6 °C, and 0.44 × 10−6 °C within 30 min, respectively. Accordingly, the induced electric field, specific absorption rate, and temperature rise in the human body and heart are less than the safety limits specified in the ICNIRP. The electric field intensity at the pacemaker electrode and the temperature rise of the pacemaker meet the requirements of the medical device standards of ICNIRP and ISO 14708-2. Consequently, the electromagnetic radiation from the motor operation in the electric vehicle does not pose a safety risk to the health of passengers wearing cardiac pacemakers in this paper. This study also contributes to advancing research on the electromagnetic environment of electric vehicles and provides guidance for ensuring the safe travel of individuals wearing cardiac pacemakers. [ABSTRACT FROM AUTHOR]

With the ongoing promotion and adoption of electric vehicles, intelligent and connected technologies have been continuously advancing. Electrical control systems implemented in electric vehicles have emerged as a critical research direction. Various drive-by-wire chassis systems, including drive-by-wire driving and braking systems and steer-by-wire systems, are extensively employed in vehicles. Concurrently, unavoidable issues such as conflicting control system objectives and execution system interference emerge, positioning integrated chassis control as an effective solution to these challenges. This paper proposes a model predictive control-based longitudinal dynamics integrated chassis control system for pure electric commercial vehicles equipped with electro–mechanical brake (EMB) systems, centralized drive, and distributed braking. This system integrates acceleration slip regulation (ASR), a braking force distribution system, an anti-lock braking system (ABS), and a direct yaw moment control system (DYC). This paper first analyzes and models the key components of the vehicle. Then, based on model predictive control (MPC), it develops a controller model for integrated stability with double-layer torque distribution. The required driving and braking torque for each wheel are calculated according to the actual and desired motion states of the vehicle and applied to the corresponding actuators. Finally, the effectiveness of this strategy is verified through simulation results from Matlab/Simulink. The simulation shows that the braking deceleration of the braking condition is increased by 32% on average, and the braking distance is reduced by 15%. The driving condition can enter the smooth driving faster, and the time is reduced by 1.5 s~5 s. The lateral stability parameters are also very much improved compared with the uncontrolled vehicles. [ABSTRACT FROM AUTHOR]

The advancement of new energy vehicles has led to more demanding standards for detecting defects in cylindrical coated lithium batteries. The current research lacks robustness and has low performance. This paper seeks to provide real-time defect identification in cylindrical coated lithium batteries and improve the object detection method of the YOLOv5s model. This paper presents an MGSEC3 module with multi-scale feature extraction and integration of the SENet network in the YOLOv5 Backbone network. This module aims to reduce computational burden and enhance feature extraction efficiency as much as possible. At the same time, the CARAFE operator is utilized to enhance the up-sampling operator in order to reduce the loss of feature information. In addition, enhancements to the loss function enhance both the detection performance and convergence speed. The enhanced YOLOv5s model achieved an average detection rate of 82.4% on the custom cylindrical coated lithium battery dataset, 2.3% higher than the original YOLOv5s. This paper significantly enhances the precision and efficiency of flaw identification in cylindrical coated lithium batteries. [ABSTRACT FROM AUTHOR]

Accurate forecasting of electric vehicle (EV) load is essential for grid stability and energy management. EV load forecasting is influenced by multiple factors. At present, the load forecasting model for EVs mainly uses collected sample data to build a data‐driven model. But these algorithms need to collect all the data together to train the model, ignoring the privacy of each data collection source. In a competitive market environment, each device service provider is not willing to share the sample data they store. Aiming at this problem, this paper proposes an EV load diagnosis algorithm considering data privacy. Firstly, a convolutional neural network with dual attention mechanism is constructed as the basic time series forecasting model. The association rule algorithm is used to select weather data with strong associations as the inputs of the model. Each service provider uses local data to perform deep learning network. All models are then trained using a federated learning framework. During the entire training process, historical data is stored locally, and only model parameter information is shared and interacted; thus data privacy is protected. Finally, the validity of the algorithm in this paper is verified by using real collected EV load data. [ABSTRACT FROM AUTHOR]

A multi-port energy router (MER) is an important infrastructure for power management and energy storage after an unexpected power outage. In addition, MERs can relate to various emergency electric power sources (EEPSs) and power grids at the same time. Moreover, by putting an MER in mobile energy storage, an MER allows for more flexible energy management and regulation in urban cities. This paper proposes a new topology of MERs composed of a bidirectional AC/DC converter and a partial power processing-based triple active bridge (PPP-based TAB) converter to supply emergency power for an unexpected power outage. This design of an MER improves the power efficiency significantly to realize peer-to-peer (P2P) trading which realizes the bidirectional power transmission among the main power grid, EEPSs such as the battery of electric vehicles (EV), and clients' loads. The control methods of the power transmission of two power electronic converters in MER are also illustrated in this paper to realize the power transmission among the main power grid, clients' loads, and EEPSs. This allows any power source connected to the MER to be used as an input or output to receive or send out power, which greatly improves the utilization of power. In conclusion, the MATLAB/Simulink and experiment test are executed and meticulously presented to validate the practicality of the proposed configuration. [ABSTRACT FROM AUTHOR]

Vehicle electrification has shown the potential to reduce environmental impacts and greenhouse gas emissions from the transport sector. As electric vehicles (EVs) become increasingly prominent, the efficient placement of charging infrastructure poses a complex challenge that demands careful consideration. This paper delves into the investigation of how travel and parking patterns, derived from empirical data on freight vehicles, influence the optimal distribution of charging infrastructure across the freight network. This paper presents a node-based approach to optimize the allocation of charging infrastructure tailored explicitly for freight transport. The study identifies optimal locations for operator-owned charging infrastructure by leveraging GPS-based data collected from a fleet of freight vehicles operating in the greater Gothenburg metropolitan area. This research aims to enhance our understanding of the charging infrastructure requirements inherent in the freight transport system and provide decision support to logistics companies contemplating the shift from conventional fossil fuel vehicles to electric freight vehicles. The proposed model holds the potential for seamless adaptation to diverse freight transport systems, offering valuable insights to expedite the transition toward fossil-free freight transport on a broader scale. • Complexity in charging infrastructure placement for freight transport. • Empirical data from a fleet of freight vehicles in Gothenburg metropolitan area. • Investigation of travel and parking patterns of freight vehicles. • Node-based optimization approach to allocate charging infrastructure. [ABSTRACT FROM AUTHOR]

A predictive model for the spatiotemporal distribution of electric vehicle (EV) charging load is proposed in this paper, considering multimodal travel behavior and microscopic traffic simulation. Firstly, the characteristic variables of travel time are fitted using advanced techniques such as Gaussian mixture distribution. Simultaneously, the user's multimodal travel behavior is delineated by introducing travel purpose transfer probabilities, thus establishing a comprehensive travel spatiotemporal model. Secondly, the improved Floyd algorithm is employed to select the optimal path, taking into account various factors including signal light status, vehicle speed, and the position of starting and ending sections. Moreover, the approach of multi-lane lane change following and the utilization of cellular automata theory are introduced. To establish a microscopic traffic simulation model, a real-time energy consumption model is integrated with the aforementioned techniques. Thirdly, the minimum regret value is leveraged in conjunction with various other factors, including driving purpose, charging station electricity price, parking cost, and more, to simulate the decision-making process of users regarding charging stations. Subsequently, an EV charging load predictive framework is proposed based on the approach driven by electricity prices and real-time interaction of coupled network information. Finally, this paper conducts large-scale simulations to analyze the spatiotemporal distribution characteristics of EV charging load using a regional transportation network in East China and a typical power distribution network as case studies, thereby validating the feasibility of the proposed method. [ABSTRACT FROM AUTHOR]

Aiming at the problem of source-load uncertainty caused by the increasing penetration of renewable energy and the large-scale integration of electric vehicles (EVs) into modern power system, a robust optimal operation scheduling algorithm for regional integrated energy systems (RIESs) with such uncertain situations is urgently needed. Based on this background, aiming at the problem of the irregular charging demand of EV, this paper first proposes an EV charging demand model based on the trip chain theory. Secondly, a multi-RIES optimization operation model including a shared energy storage station (SESS) and integrated demand response (IDR) is established. Aiming at the uncertainty problem of renewable energy, this paper transforms this kind of problem into a dynamic robust optimization with time-varying parameters and proposes an improved robust optimization over time (ROOT) algorithm based on the scenario method and establishes an optimal scheduling mode with the minimum daily operation cost of a multi-regional integrated energy system. Finally, the proposed uncertainty analysis method is verified by an example of multi-RIES. The simulation results show that in the case of the improved ROOT proposed in this paper to solve the robust solution of renewable energy, compared with the traditional charging load demand that regards the EVs as a whole, the EV charging load demand based on the trip chain can reduce the cost of EV charging by 3.5% and the operating cost of the multi-RIES by 11.7%. With the increasing number of EVs, the choice of the starting point of the future EV trip chain is more variable, and the choice of charging methods is more abundant. Therefore, modeling the charging demand of EVs under more complex trip chains is the work that needs to be studied in the future. [ABSTRACT FROM AUTHOR]

The purpose of this article is is to investigate the critical speed and back-layer length of smoke propagation during fires of lithium-ion battery vehicles in tunnels. The combustion of lithium-ion battery vehicles in tunnels is numerically simulated. This article uses heat release rate (HRR) and ventilation rate to predict the length of smoke counterflow in tunnel fires with new energy vehicles. Temperature is an important parameter for calculating smoke counterflow. The temperature in the tunnel is measured by thermocouples. The results showed that dimensionless critical velocity influences dimensionless HRR. The numerical simulation results indicated that there is a certain correlation between the HRR variable, which corresponds to the dimensionless smoke counterflow length and the critical speed in the tunnel. This article proposed a computational model for predicting the length of smoke counterflow. This paper contributes to the prevention of tunnel fires and reduction of social and economic losses. Therefore, this paper guides the propagation of smoke under the roof of lithium-ion battery vehicle fires in tunnels. [ABSTRACT FROM AUTHOR]

Human geographers are increasingly concerned with how 'futures' are imagined and rendered governable, yet mostly their methods lack the sensitivity to explore the functioning of complex relations between heterogeneous actors across places. The world's electric vehicle (EV) sector is booming, presaging a widely expected decarbonised future, associated with a restructuring of the automobile industry as anticipated by proactive players. This paper interrogates the spatiality and politics of the EV future‐making through disentangling the translocal practices involved in realising Tesla's Gigafactory in Shanghai (TGS) as assemblage. Informed by interviews with industrial insiders and opensource information in Chinese and English, the article finds that, first, TGS's imagined future embodies a multiplicity of interdependent but divergent expectations, the coherence of which underlies the formation and operation of the TGS assemblage by virtue of the concerted actions of its member‐actors. Second, such coherence is conditional as designed by TGS's central planners—namely, Tesla and Chinese government agencies at central and local levels—for their differentiated but overlapping interests. The TGS's imagined future is rendered actionable, enrolling other agents at certain moments, through anticipatory practices of regulatory changes, strategic arrangements interweaving land and financing, firm acquisition and intra‐firm reorganisation linking up places in and outside China, as well as the selection of key suppliers and technological use of critical raw materials. Concluding after a sketch on the TGS's 'possible futures' and broader implications, the paper contributes an assemblage‐informed approach to disentangle futuremaking practices and generates timely insights into the 'future‐oriented' restructuring of the automobile industry. [ABSTRACT FROM AUTHOR]

This paper studies the diffusion of battery electric vehicle (BEV) technology in Japan. The diffusion process in this study refers to both the innovation and adoption of BEV technology. While previous studies on BEV technological diffusion focus on policy selection, especially domestic policy, little is known about the connectedness between international and domestic factors in the BEV technological diffusion process. This paper aims to enrich the discussion of technology diffusion by expanding the argument that technology diffusion is not only a domestic problem but also an international relations problem using a case study of BEV technology diffusion in Japan. The findings indicate that two international factors push Japan to diffuse BEV technology: Japanese commitment to the global environmental regime and global competition in BEV manufacturing. However, the domestic institution factor hinders the BEV technology diffusion. The production structures of automobile industries and political economy relations between the automobile industry and the government further complicate the diffusion process of BEV technology. [ABSTRACT FROM AUTHOR]

Isolated bidirectional DC–DC converters are becoming increasingly important in various applications, particularly in the electric vehicle sector, due to their ability to achieve bidirectional power flow and their safety features. This paper aims to review the switch strategies and topologies of isolated bidirectional DC–DC converters, with a specific focus on their applications in the field of electric vehicles. From the perspective of topology, PWM-type isolated bidirectional DC–DC converters, dual active bridge converters, and resonant-type isolated bidirectional DC–DC converters constitute the three main categories of these converters. The paper further examines the traditional switch strategies of these converters and discusses how specific switch technologies, such as single-phase shift, expanding-phase shift, double-phase shift, and triple-phase shift, can enhance the overall performance of isolated bidirectional DC–DC converters. The paper meticulously examines the characteristics of each topology and control scheme, as well as their typical use cases in practical applications. Particularly, the paper delves into the applications of isolated bidirectional DC–DC converters in the electric vehicle sector and draws conclusions regarding their potential and trends in future electric vehicle technology. [ABSTRACT FROM AUTHOR]

This paper presents a charging architecture for the Reconfigurable Cascaded Multilevel converter, which was specifically designed for electric vehicle (EV) powertrain applications. The RCMC topology is capable of executing power conversion and actively managing battery systems concurrently. The active battery management is achieved using the Reconfigurable Battery Module, which regulates the serial connection of cells via a switch pattern. In this paper, the RCMC is directly interfaced with an AC three-phase power system, facilitating the dynamic control over battery cells charging. Its inherent design allows for the implementation of various charging algorithms, customizable to specific requirements, without necessitating additional intermediary power stages. Firstly, an overview of the RCMC topology is given, and an analysis to define the optimal filter inductance is carried out. Subsequently, after the AC system characteristics are explained, two charging algorithms are presented and described: one prioritizes State of Charge (SOC) balancing among battery cells, while the other focuses on minimizing power losses. Moreover, a time estimation computation for the RCMC is carried out considering a two-level AC charging station. The result is compared with the time required for a conventional battery pack. The results show a reduction of 10 s in charging time for a mere 20% increase in SOC. Finally, the experimental setup is presented and used to validate the efficacy of the proposed algorithms. [ABSTRACT FROM AUTHOR]

The rising Greenhouse Gas (GHG) emissions stemming from the extensive use of automobiles across the globe represent a critical environmental challenge, contributing significantly to phenomena such as global warming and the deterioration of air quality. To address these challenges, there is a critical need for research and development in electric vehicles (EVs) and their associated charging infrastructure, including off-board and on-board chargers (OBCs). This paper aims to bridge the gaps in existing review literature by offering a comprehensive review of both integrated and non-integrated OBCs for EVs, based on the authors' knowledge at the time of writing. The paper begins by outlining trends in the EV market, including voltage levels, power ratings, and relevant standards. It then provides a detailed analysis of two-level and multi-level power converter topologies, covering AC-DC power factor correction (PFC) and isolated DC-DC topologies. Subsequently, it discusses single-stage and two-stage non-integrated OBC solutions. Additionally, various categories of integrated OBCs (iOBCs) are explored, accompanied by relevant examples. The paper also includes comparison tables containing technical specifications and key characteristics for reference and analysis. [ABSTRACT FROM AUTHOR]

Battery Management System (BMS) functions to monitor individual cell in a battery pack and its crucial task is to maintain stability throughout the battery pack. The BMS is responsible for maintaining the safety of the battery as well as not to harm the user or environment. The parameters that are to be monitored in a battery are Voltage, Current and Temperature. With the collected data, BMS carefully monitors the charging–discharging behavior of the battery particularly in the Lithium-ion (Li-ion) batteries in which charging and discharging behavior are completely different. This paper proposes a real-time IOT connected deep learning algorithm for estimation of State-of-Charge (SoC) of Li-ion batteries. This paper provides unique objectives and congruence between model-based conventional methods and state-of-the-art deep learning algorithm, specifically Feed Forward Neural Network (FNN) which is nonRecurrent. This paper also highlights the advantages of Internet-of-Things (IoT) connected deep learning algorithm for estimation of State-of-Charge of Li-ion batteries in Hybrid Electric Vehicles (HEVs) and Electric Vehicles (EVs). The major advantage of the proposed method is that the Artificial Intelligence (AI)-based techniques aim to bring the estimation error less than 2% at a low cost and time without the model of the battery, at par with conventional method of Extended Kalman Filter (EKF) which is the best ever practical estimation theory. Another advantage of the proposed method is that in an abnormal condition (i.e., Unsafe Temperature) the IF This Then That (IFTTT) IoT mobile application interfaced with BMS through ThingSpeak cloud, sends a notification alert to the battery expert or to the user prior to an emergency. Finally, the real-time data of the battery parameters are collected through ThingSpeak cloud platform for future research and analysis. [ABSTRACT FROM AUTHOR]

A lithium-ion battery–ultracapacitor hybrid energy storage system (HESS) has been recognized as a viable solution to address the limitations of single battery energy sources in electric vehicles (EVs), especially in urban driving conditions, owing to its complementary energy features. However, an energy management strategy (EMS) is required for the optimal performance of the HESS. In this paper, an EMS based on the particle swarm optimization (PSO) of the fuzzy logic controller (FLC) is proposed. It aims to minimize battery current and power peak fluctuations, thereby enhancing its capacity and lifespan, by optimizing the weights of formulated FLC rules using the PSO algorithm. This paper utilizes the battery temperature as the cost function in the optimization problem of the PSO due to the sensitivity of lithium-ion batteries (LIBs) to operating temperature variations compared to ultracapacitors (UCs). An evaluation of optimized FLC using PSO and a developed EV model is conducted under the Urban Dynamometer Driving Schedule (UDDS) and compared with the unoptimized FLC. The result shows that 5.4% of the battery's capacity was conserved at 25.5 °C, which is the highest operating temperature attained under the proposed strategy. [ABSTRACT FROM AUTHOR]

This paper presents an overview of the status and future prospects of fuel-cell electric vehicles (FC-EVs). As global concerns about emissions escalate, FC-EVs have emerged as a promising substitute for traditional internal combustion engine vehicles. This paper discusses the fundamentals of fuel-cell technology considering the major types of fuel cells that have been researched and delves into the most suitable fuel cells for FC-EV applications, including comparisons with mainstream vehicle technologies. The present state of FC-EVs, ongoing research, and the challenges and opportunities that need to be accounted for are discussed. Furthermore, the comparison between promising proton-exchange membrane fuel cell (PEMFC) and solid oxide fuel cell (SOFC) technologies used in EVs provides valuable insights into their respective strengths and challenges. By synthesizing these aspects, the paper aims to provide a comprehensive understanding and facilitate decision-making for future advancements in sustainable FC-EV transportation, thereby contributing to the realization of a cleaner, greener, and more environmentally friendly future. [ABSTRACT FROM AUTHOR]

Peer-to-peer (P2P) energy trading has attracted a lot of attention and the number of electric vehicles (EVs) has increased in the past couple of years. Toward sustainable mobility, EVs meet the standard development goals (SDGs) for attaining a sustainable future in the transport sector. This development and increasing number of EVs creates an opportunity for prosumers to trade electricity. Considering this opportunity, this review article aims to provide an in-depth analysis of P2P energy trading of EVs using blockchain in centralized and decentralized networks, which enables prosumers to exchange energy directly with one another. The paper is aimed to provide the reader with a state-of-the-art review on the P2P energy trading for EVs, considering different blockchain algorithms that are practically implemented or still in the research phase. Moreover, the paper presents blockchain applications, current trends, and future challenges of EVs' energy trading. P2P energy trading for EVs using blockchain algorithms can be successfully implemented considering real-time scenarios and economically benefits smart sustainable societies. [ABSTRACT FROM AUTHOR]

The layout and configuration of urban infrastructure are essential for the orderly operation and healthy development of cities. With the promotion and popularization of new energy vehicles, the modeling and prediction of charging pile usage and allocation have garnered significant attention from governments and enterprises. Short-term demand forecasting for charging piles is crucial for their efficient operation. However, existing prediction models lack a discussion on the appropriate time window, resulting in limitations in station-level predictions. Recognizing the temporal nature of charging pile occupancy, this paper proposes a novel stacked-LSTM model called attention-SLSTM that integrates an attention mechanism to predict the charging demand of electric vehicles at the station level over the next few hours. To evaluate its performance, this paper compares it with several methods. The experimental results demonstrate that the attention-SLSTM model outperforms both LSTM and stacked-LSTM models. Deep learning methods generally outperform traditional time series forecasting methods. In the test set, MAE is 1.6860, RMSE is 2.5040, and MAPE is 9.7680%. Compared to the stacked-LSTM model, MAE and RMSE are reduced by 4.7%and 5%, respectively; while MAPE value decreases by 1.3%, making it superior to LSTM overall. Furthermore, subsequent experiments compare prediction performance among different charging stations, which confirms that the attention-SLSTM model exhibits excellent predictive capabilities within a six-step (2 h) window. [ABSTRACT FROM AUTHOR]

Electric vehicles with proper battery charging mechanism are essential to achieve superior performance with good dynamic response and high efficiency. This paper comes up with the analysis of interval type-2 fuzzy logic controller (IT2FLC) for interleaved Cuk converter for battery charging in electric vehicles. The key intention of this paper is to obtain excellent controller parameters such as improved accuracy and stability with good power quality attributes of less harmonic distortion and unity power factor at the supply side using a robust and intelligent control approach. IT2FLC is developed effectively to acquire the optimal proportional integral (PI) parameters for the constant current and constant voltage charging controllers to enrich the operation of the battery charging system. This in turn achieves excellent transient parameters with less settling time of 0.01 s, reduced overshoot of 1% and efficiency of about 93.85%. The so-called interval type-2 (IT2) controller is therefore accomplished to alleviate uncertainties and improvise the dynamic stability of the charging solution. The behavioural traits of the intelligent controller are examined and compared with Ziegler–Nicholas tuned PI and T1FL-based PI using MATLAB/Simulink. A hardware prototype of 350 W, 48 V/5 A charger is built and verified with dsPIC33F to evaluate the working principle of the converter using IT2. [ABSTRACT FROM AUTHOR]

Fuel cell technology emerges as a promising green solution, offering mitigation to global warming, air pollution, and energy crises. This eco-friendly approach is witnessing a surge in adoption within the automotive sector, with fuel cell buses, cars, scooters, forklifts, and more, becoming increasingly prevalent. The automobile industry has been rapidly advancing fuel cell technology, inching closer to the commercialization of fuel cell vehicles. As various technical hurdles are surmounted and costs are reduced, fuel cell vehicles are poised to become a competitive force in the automobile market, presenting an excellent solution for environmental sustainability and energy efficiency. This review paper delves into the fundamentals of fuel cells, their characteristics, and their applications in the automotive realm, exploring their prospects in comparison to traditional technologies. Furthermore, it sheds light on the existing research and industrial developments in hydrogen and fuel cell technologies. Additionally, a comprehensive comparison is provided between various fuel cell cars that have already been commercialized, enabling readers to understand the current market landscape. The review also analyses the advantages and challenges associated with fuel cell technology, offering insights into its future development trajectory. Through this comprehensive exploration, readers can gain a deeper understanding of fuel cell technology and its potential in revolutionizing the automotive industry. [ABSTRACT FROM AUTHOR]