Search

The increasing presence of e-books (electronic books) has become a major focus in countries around the world. In the United States, e-books represented 28% of the total book sales for 2012. In Japan, the conversion from paper books to e-books is expected to accelerate by the prevalent use of smartphones and tablet PCs. It is therefore important to quantitatively evaluate the environmental load of paper books and e-books for a sustainable society. In this study, paper books are compared to e-books read on different electronic devices (e-ink tablets, tablets, cell phones, smartphones, laptop computers, desktop computers and portable music players) through a case study on a 224-page book. The study is based on key primary data such as use time and reading speed for each device and aims to minimize assumptions made in other studies. GHG emissions for paper books are 1.24 kg-CO 2 e/book, and are reduced to 1.11 kg-CO 2 e/book when the effect of paper recycling is taken into consideration. The results for e-books under average use-time conditions range from 0.25 to 0.91 kg-CO 2 e/book with the e-ink tablet having the lowest emissions. When the average use time of each e-book device is applied, the paper book has a higher impact than all the e-books. However, sensitivity analysis shows that the impact of paper books can be lower than that of e-books for larger screen devices such as tablets, laptops and desktops when the reuse of books is considered or the e-book reading device is hardly used during its life cycle. [ABSTRACT FROM AUTHOR]

Because transport in the port hinterlands heavily depends on roads with negative externalities, much social interest has been in modal shifts (MSs) to rail and shipping with lower environmental impact. Currently, leading industry sectors to ambitiously embrace technological innovations to decarbonize—consequently, in line with these changes, the significance of MSs should change; however, no previous studies have comprehensively presented the overall CO 2 emissions and transport mode shares for future regional cargo transport. This paper presents a scenario analysis of CO 2 emission reductions in the Japanese domestic hinterland of international maritime container transport based on future scenarios of technological innovation and change in shipper behavior. The simulation results using the global logistics intermodal network simulation model showed that up to 87% CO 2 reduction is possible, and the primary driver for this is technological innovation. Moreover, the significance of MSs fluctuates depending on the advancement of technological innovation, suggesting that MSs hold a degree of import as a decarbonization measure during the transitional phase toward carbon neutrality (CN) as technological innovation advances. The results of this study, which fluctuated considerably by scenario and timing, have policy implications with respect to the path to be followed toward CN, including whether to promote MSs. • Scenario analysis of CO 2 emission reductions in Japanese maritime transportation. • Up to 87% CO 2 reduction possible using technological innovation. • Significance of modal shifts fluctuated with the degree of technological innovation. • Policy implications suggesting that the path toward carbon neutrality is crucial. [ABSTRACT FROM AUTHOR]

This paper examines the life-cycle greenhouse gas (GHG) emissions reduction and associated marginal costs (MC) in Japan when the government enhances the transition to battery electric passenger vehicles (BEVs) by implementing a rapid investment regime for charging stations and fossil-fueled vehicle bans. Important factors affecting BEV emissions are battery performance, battery production technology, electricity generation mix and battery minimum state of charge (SOC min). We find that in addition to a rapid investment regime, a fossil-fueled vehicles ban policy is necessary to significantly increase the uptake of BEVs and achieves the deepest reduction in life cycle GHG emissions. Under this policy, with carbon neutral electricity by 2050 and a low SOC min charging regime, life-cycle GHG emissions are reduced by 48% and the MC by 53% in 2060. A carbon neutral light transport fleet in 2050 will require carbon capture and storage to offset 24 million tonnes-CO 2 equivalent of emissions even if electricity is carbon neutral by 2050 and users adhere to a low SOC min charging regime. [Display omitted] • Enhanced infrastructure development has a little impact on the uptake of BEVs. • The more stringent vehicle ban reduces life cycle GHG emissions the most. • Battery charging regime is crucial to GHG emissions reduction and associated cost. • Improving battery and vehicle production is crucial to GHG emissions reduction. • Carbon neutral light vehicle transport by 2050 requires carbon capture and storage. [ABSTRACT FROM AUTHOR]

Manufacturing accounts for 37% of the global energy demand. Few researchers have conducted a holistic energy assessment of factories where energy beyond production equipment is accounted for, and environmental impact assessments of machine tool manufacturing are even more limited. All the while, factories need to understand where energy is used, how to allocate it to their products, and where savings lie. This paper quantifies the energy consumption and greenhouse gas emissions of a machine tool manufacturer located in Iga, Japan. Six plants within the factory are investigated whose primary operations range from precision machining to product assembly. Furthermore, a model of the energy consumption of each plant's HVAC system is developed and used to evaluate the environmental impacts and operating costs at alternative sites in China, Germany, and the US. Location was found to have a significant influence on the environmental impacts and resulted in changes in the annual energy consumption relative to the Iga baseline that ranged from −10% to 8%. Additionally, opportunities for improvement were identified by comparing the energy intensities of the equipment within the plants to industrial averages. Since the plants in this study use widespread manufacturing processes and varied climates were investigated, the methods and strategies that were developed can be extended to other discrete manufacturing facilities to identify opportunities for cleaner production. [ABSTRACT FROM AUTHOR]

Abstract: A model is developed that simulates nationwide energy consumption of the residential sector by considering the diversity of household and building types. Since this model can simulate the energy consumption for each household and building category by dynamic energy use based on the schedule of the occupants’ activities and a heating and cooling load calculation model, various kinds of energy-saving policies can be evaluated with considerable accuracy. In addition, the average energy efficiency of major electric appliances used in the residential sector and the percentages of housing insulation levels of existing houses is predicted by the “stock transition model.” In this paper, energy consumption and CO2 emissions in the Japanese residential sector until 2025 are predicted. For example, as a business – as-usual (BAU) case, CO2 emissions will be reduced by 7% from the 1990 level. Also evaluated are mitigation measures such as the energy efficiency standard for home electric appliances, thermal insulation code, reduction of standby power, high-efficiency water heaters, energy-efficient behavior of occupants, and dissemination of photovoltaic panels. [Copyright &y& Elsevier]

Abstract: Japan has developed a variety of national strategies and plans related to biofuels which address four main policy objectives, including reduction of greenhouse gas (GHG) emissions, energy security, rural development, and realisation of a recycle-based society. This paper reviews these national strategies and plans as well as associated implementing policies, and discusses the extent to which these objectives may be achieved. This paper found that the long-term potential of biofuels to contribute to GHG reduction goals will depend not only on the rates of technological development of the second generation biofuels but also on the development of other advanced vehicles. In the medium term, the potential contribution of biofuels to rural development and realising a recycle-based society could become significant depending on the progress of technology for both second generation biofuel production and the collection and transportation of their feedstocks. The potential contribution of biofuels to Japan’s energy security is constrained by the availability of imports and the potential of domestic production. [Copyright &y& Elsevier]