Search

To predict and explore the return period wind speed distribution in Beijing urban area, based on the short-term measured wind speed record, the measured independent storm peak samples are extracted and the Monte–Carlo numerical simulation method is used to randomly generate pseudo-independent storm peak samples with the same distribution as the independent storm peak samples. In addition, the appropriate threshold is used to select and extract the over-threshold independent storm peak samples from the measured samples. And, then, the return period wind speed of the whole wind direction is predicted. Further, the traditional Cook method is used to predict and analyze the return period wind speed of each wind direction according to the measured wind speed data. The results show that the return period wind speed prediction results of the whole wind direction corresponding to the simulated pseudo samples and the measured over-threshold samples are basically close to each other, and the maximum relative deviation is less than 7%. The mean relative deviation of the return period wind speed prediction results is about 10.6% between each wind direction and the whole wind direction, and the mean relative deviation is about 9.4% between the RPWS prediction result of each wind direction and the design value of the code. In addition, the return period wind speed prediction values of the west by southwest, northwest and north by northeast wind directions exceed the design value of the code, while the predicted values of the other wind directions are within the envelope range of the design value of the code. Finally, the research content of this paper can provide some reference for the wind resistance design analysis of building structures in Beijing area. [ABSTRACT FROM AUTHOR]

Intelligent connected vehicles (ICVs) have played an important role in improving the intelligence degree of transportation systems, and improving the trajectory prediction capability of ICVs is beneficial for traffic efficiency and safety. In this paper, a real-time trajectory prediction method based on vehicle-to-everything (V2X) communication is proposed for ICVs to improve the accuracy of their trajectory prediction. Firstly, this paper applies a Gaussian mixture probability hypothesis density (GM-PHD) model to construct the multidimension dataset of ICV states. Secondly, this paper adopts vehicular microscopic data with more dimensions, which is output by GM-PHD as the input of LSTM to ensure the consistency of the prediction results. Then, the signal light factor and Q-Learning algorithm were applied to improve the LSTM model, adding features in the spatial dimension to complement the temporal features used in the LSTM. When compared with the previous models, more consideration was given to the dynamic spatial environment. Finally, an intersection at Fushi Road in Shijingshan District, Beijing, was selected as the field test scenario. The final experimental results show that the GM-PHD model achieved an average error of 0.1181 m, which is a 44.05% reduction compared to the LiDAR-based model. Meanwhile, the error of the proposed model can reach 0.501 m. When compared to the social LSTM model, the prediction error was reduced by 29.43% under the average displacement error (ADE) metric. The proposed method can provide data support and an effective theoretical basis for decision systems to improve traffic safety. [ABSTRACT FROM AUTHOR]

Day by day pollution in cities is increasing due to urbanization. One of the biggest challenges posed by the rapid migration of inhabitants into cities is increased air pollution. Sustainable Development Goal 11 indicates that 99 percent of the world's urban population breathes polluted air. In such a trend of urbanization, predicting the concentrations of pollutants in advance is very important. Predictions of pollutants would help city administrations to take timely measures for ensuring Sustainable Development Goal 11. In data engineering, imputation and the removal of outliers are very important steps prior to forecasting the concentration of air pollutants. For pollution and meteorological data, missing values and outliers are critical problems that need to be addressed. This paper proposes a novel method called multiple iterative imputation using autoencoder-based long short-term memory (MIA-LSTM) which uses iterative imputation using an extra tree regressor as an estimator for the missing values in multivariate data followed by an LSTM autoencoder for the detection and removal of outliers present in the dataset. The preprocessed data were given to a multivariate LSTM for forecasting PM2.5 concentration. This paper also presents the effect of removing outliers and missing values from the dataset as well as the effect of imputing missing values in the process of forecasting the concentrations of air pollutants. The proposed method provides better results for forecasting with a root mean square error (RMSE) value of 9.8883. The obtained results were compared with the traditional gated recurrent unit (GRU), 1D convolutional neural network (CNN), and long short-term memory (LSTM) approaches for a dataset of the Aotizhonhxin area of Beijing in China. Similar results were observed for another two locations in China and one location in India. The results obtained show that imputation and outlier/anomaly removal improve the accuracy of air pollution forecasting. [ABSTRACT FROM AUTHOR]

Surface settlement is one of the key engineering issues during shield construction process. In order to accurately predict surface settlement, this paper proposes a new machine learning method based on relevance vector machine (RVM), principal component analysis (PCA), and particle swarm optimization (PSO). Taking Beijing Metro Line 6 as a case study, the PCA-PSO-RVM model is used to make the prediction and compared with the prediction results of the RVM model using the same samples. In order to evaluate the reliability of the model, three evaluation indexes including mean relative error (MRE), root mean square error (RMSE), and Theil inequality coefficient (TIC) were calculated, and sensitivity analysis was carried out on them. The results show that the minimum relative error between PCA-PSO-RVM and the actual value is only 0.06%. The calculated MRE, RMSE, and TIC are 0.17%, 0.0714 mm, and 0.027%, respectively, which shows that PCA-PSO-RVM model has higher prediction accuracy, smaller deviations, and higher reliability compared with the three other models. Through sensitivity analysis, it is found that the weighted average internal friction angle (φ) has the most significant impact on the surface settlement, which should be focused on in relevant research. [ABSTRACT FROM AUTHOR]

Ensemble forecasting systems have become an important tool for estimating the uncertainties in initial conditions and model formulations and they are receiving increased attention from various applications. The Regional Ensemble Prediction System (REPS), which has operated at the Beijing Meteorological Service (BMS) since 2017, allows for probabilistic forecasts. However, it still suffers from systematic deficiencies during the first couple of forecast hours. This paper presents an integrated probabilistic nowcasting ensemble prediction system (NEPS) that is constructed by applying a mixed dynamic-integrated method. It essentially combines the uncertainty information (i.e., ensemble variance) provided by the REPS with the nowcasting method provided by the rapid-refresh deterministic nowcasting prediction system (NPS) that has operated at the Beijing Meteorological Service (BMS) since 2019. The NEPS provides hourly updated analyses and probabilistic forecasts in the nowcasting and short range (0–6 h) with a spatial grid spacing of 500 m. It covers the three meteorological parameters: temperature, wind, and precipitation. The outcome of an evaluation experiment over the deterministic and probabilistic forecasts indicates that the NEPS outperforms the REPS and NPS in terms of surface weather variables. Analysis of two cases demonstrates the superior reliability of the NEPS and suggests that the NEPS gives more details about the spatial intensity and distribution of the meteorological parameters. [ABSTRACT FROM AUTHOR]

The air quality index (AQI), as an indicator to describe the degree of air pollution and its impact on health, plays an important role in improving the quality of the atmospheric environment. Accurate prediction of the AQI can effectively serve people's lives, reduce pollution control costs and improve the quality of the environment. In this paper, we constructed a combined prediction model based on real hourly AQI data in Beijing. First, we used singular spectrum analysis (SSA) to decompose the AQI data into different sequences, such as trend, oscillation component and noise. Then, bidirectional long short-term memory (BiLSTM) was introduced to predict the decomposed AQI data, and a light gradient boosting machine (LightGBM) was used to integrate the predicted results. The experimental results show that the prediction effect of SSA-BiLSTM-LightGBM for the AQI data set is good on the test set. The root mean squared error (RMSE) reaches 0.6897, the mean absolute error (MAE) reaches 0.4718, the symmetric mean absolute percentage error (SMAPE) reaches 1.2712%, and the adjusted R2 reaches 0.9995. [ABSTRACT FROM AUTHOR]

The predictions from time series data can help us sense development trends and make scientific decisions in advance. The commonly used forecasting methods with backpropagation consume a lot of computational resources. The deep echo state network (DeepESN) is an advanced prediction method with a deep neural network structure and training algorithm without backpropagation. In this paper, a Bayesian optimization algorithm (BOA) is proposed to optimize DeepESN to address the problem of increasing parameter scale. Firstly, the DeepESN was studied and constructed as the basic prediction model for the time series data. Secondly, the BOA was reconstructed, based on the DeepESN, for optimal parameter searching. The algorithm is proposed within the framework of the DeepESN. Thirdly, an experiment was conducted to verify the DeepESN with a BOA within three datasets: simulation data generated from computer programs, a real humidity dataset collected from Beijing, and a power load dataset obtained from America. Compared with the models of BP (backpropagation), LSTM (long short-term memory), GRU (gated recurrent unit), and ESN (echo state network), DeepESN obtained optimal results, which were 0.0719, 18.6707, and 764.5281 using RMSE evaluation. While getting better accuracy, the BOA optimization time was only 323.4 s, 563.2 s, and 9854 s for the three datasets. It is more efficient than grid search and grey wolf optimizer. [ABSTRACT FROM AUTHOR]

Air quality plays a vital role in people's health, and air quality forecasting can assist in decision making for government planning and sustainable development. In contrast, it is challenging to multi-step forecast accurately due to its complex and nonlinear caused by both temporal and spatial dimensions. Deep models, with their ability to model strong nonlinearities, have become the primary methods for air quality forecasting. However, because of the lack of mechanism-based analysis, uninterpretability forecasting makes decisions risky, especially when the government makes decisions. This paper proposes an interpretable variational Bayesian deep learning model with information self-screening for PM2.5 forecasting. Firstly, based on factors related to PM2.5 concentration, e.g., temperature, humidity, wind speed, spatial distribution, etc., an interpretable multivariate data screening structure for PM2.5 forecasting was established to catch as much helpful information as possible. Secondly, the self-screening layer was implanted in the deep learning network to optimize the selection of input variables. Further, following implantation of the screening layer, a variational Bayesian gated recurrent unit (GRU) network was constructed to overcome the complex distribution of PM2.5 and achieve accurate multi-step forecasting. The high accuracy of the proposed method is verified by PM2.5 data in Beijing, China, which provides an effective way, with multiple factors for PM2.5 forecasting determined using deep learning technology. [ABSTRACT FROM AUTHOR]

Accurate monitoring of air quality can no longer meet people's needs. People hope to predict air quality in advance and make timely warnings and defenses to minimize the threat to life. This paper proposed a new air quality spatiotemporal prediction model to predict future air quality and is based on a large number of environmental data and a long short-term memory (LSTM) neural network. In order to capture the spatial and temporal characteristics of the pollutant concentration data, the data of the five sites with the highest correlation of time-series concentration of PM2.5 (particles with aerodynamic diameter ≤2.5 mm) at the experimental site were first extracted, and the weather data and other pollutant data at the same time were merged in the next step, extracting advanced spatiotemporal features through long- and short-term memory neural networks. The model presented in this paper was compared with other baseline models on the hourly PM2.5 concentration data set collected at 35 air quality monitoring sites in Beijing from January 1, 2016, to December 31, 2017. The experimental results show that the performance of the proposed model is better than other baseline models. [ABSTRACT FROM AUTHOR]

Since the limitation of carbon emissions, China's photovoltaic (PV) industry has developed vigorously, while some traditional heavy industries have been violently hit. Therefore, the industrial production data exhibits significant nonlinear and complexity characteristics, which may affect prediction accuracy, thus hindering the corresponding department's decision-making. Consequently, a novel structure-adaptive fractional Bernoulli grey model is presented in this paper to surmount this toughie, and the core innovations can be summarized as follows. Initially, a novel time function term is utilized to depict the accumulative time effect, which can smoothly represent the dynamic variations and significantly strengthen the robustness of the new model. Besides, the fractional-order accumulation technique, which could effectively improve the predicting accuracy, is employed in the proposed model. Furthermore, the adaptability and generalizability of the proposed model can be enhanced by the self-adaptive parameters optimized by the Particle Swarm Optimization. For illustration and verification purposes, experiments on forecasting the annual output of Photovoltaic modules in China and the annual output of steel in Beijing are compared with a range of benchmarks, including the classic GM (1, 1), conventional econometric technology, and machine learning methods. And the results confirmed that the proposed model is superior to all benchmark models, which indicates that the novel model is indeed suitable for industrial production forecasting. [ABSTRACT FROM AUTHOR]

Traffic prediction is the cornerstone of intelligent transportation system. In recent years, graph neural network has become the mainstream traffic prediction method due to its excellent processing ability of unstructured data. However, the network relationship in the real world is more complex. Multiple nodes and various associations such as different types of stations and lines in rail transit always exist at the same time. In an end-to-end model, the training accuracy will suffer if the same weights are assigned to multiple views. Thus, this paper proposes a framework with multi-view and multi-layer attention, which aims to solve the problem of node prediction involving multiple relationships. Specifically, the proposed model maps multiple relationships into multiple views. A graph convolutional neural network of multiple views with multi-layer attention learns the optimal regression of nodes. Furthermore, the model uses an autoencoder module to alleviate the over-smoothing problem during the training phase. With the historical dataset of Beijing rail transit, the experiment proves that the prediction accuracy of the model is generally better than the baseline traffic prediction algorithms. [ABSTRACT FROM AUTHOR]

Emergencies have a significant impact on the passenger flow of urban rail transit. It is of great practical significance to accurately predict the urban rail transit passenger flow and carry out research on its temporal and spatial distributions under emergency conditions. Urban rail transit operating units currently use video surveillance information mainly to process emergencies and rarely use computer vision technology to analyze passenger flow information collected. Accordingly, this paper proposes a passenger flow-based temporal and spatial distribution model for urban rail transit emergencies based on the CPT. First, this paper clarifies the categories and classification of urban rail transit emergencies, analyzes the factors affecting passenger route selection, and establishes a generalized travel cost model for passengers under emergencies. Second, this paper establishes a passenger route choice behavior model for urban rail transit based on the cumulative prospect theory. Finally, taking Beijing as an example, this paper analyzes passenger travel behavior under emergencies based on multiple logistic regression models and analyzes the impact of emergencies on rail transit travel behavior. The research results show that the cumulative prospect theory can better describe the route choice behavior of rail transit passengers under emergencies than the existing models, and this model is of great significance for handling urban rail transit emergencies. The model proposed in this paper can provide a theoretical basis for the government and relevant departments to formulate traffic management measures. [ABSTRACT FROM AUTHOR]

Emergencies have a significant impact on the passenger flow of urban rail transit. It is of great practical significance to accurately predict the urban rail transit passenger flow and carry out research on its temporal and spatial distributions under emergency conditions. Urban rail transit operating units currently use video surveillance information mainly to process emergencies and rarely use computer vision technology to analyze passenger flow information collected. Accordingly, this paper proposes a passenger flow-based temporal and spatial distribution model for urban rail transit emergencies based on the CPT. First, this paper clarifies the categories and classification of urban rail transit emergencies, analyzes the factors affecting passenger route selection, and establishes a generalized travel cost model for passengers under emergencies. Second, this paper establishes a passenger route choice behavior model for urban rail transit based on the cumulative prospect theory. Finally, taking Beijing as an example, this paper analyzes passenger travel behavior under emergencies based on multiple logistic regression models and analyzes the impact of emergencies on rail transit travel behavior. The research results show that the cumulative prospect theory can better describe the route choice behavior of rail transit passengers under emergencies than the existing models, and this model is of great significance for handling urban rail transit emergencies. The model proposed in this paper can provide a theoretical basis for the government and relevant departments to formulate traffic management measures. [ABSTRACT FROM AUTHOR]

Compared with mechanism-based modeling methods, data-driven modeling based on big data has become a popular research field in recent years because of its applicability. However, it is not always better to have more data when building a forecasting model in practical areas. Due to the noise and conflict, redundancy, and inconsistency of big time-series data, the forecasting accuracy may reduce on the contrary. This paper proposes a deep network by selecting and understanding data to improve performance. Firstly, a data self-screening layer (DSSL) with a maximal information distance coefficient (MIDC) is designed to filter input data with high correlation and low redundancy; then, a variational Bayesian gated recurrent unit (VBGRU) is used to improve the anti-noise ability and robustness of the model. Beijing's air quality and meteorological data are conducted in a verification experiment of 24 h PM2.5 concentration forecasting, proving that the proposed model is superior to other models in accuracy. [ABSTRACT FROM AUTHOR]

Persistent PM 2.5 pollution poses a serious threat to human health. Developing an accurate urban regional PM 2.5 forecasting is of practical significance for environmental protection. However, previous studies have mostly focused on individual monitoring stations, neglecting the influence of neighboring stations, which limits forecasting accuracy. Additionally, the PM 2.5 of a single monitoring station cannot reflect the overall situation of a region. Therefore, this paper develops a novel PM 2.5 spatiotemporal forecasting framework that combines graph convolutional module, temporal convolutional module, linear module. It enables the forecasting of PM 2.5 concentrations at multiple stations and multiple time steps in the future. Concretely, we utilize a mixed graph convolutional network to extract the spatial features of PM 2.5. Then, an improved temporal convolutional network, the second-order residual temporal convolutional network, is developed to capture complex temporal features. Following the classical "linear and non-linear" modeling strategy, a linear module is added to the forecasting framework. Experiments on the real air pollution dataset from Beijing demonstrate that our framework outperforms the state-of-the-art baselines. • Extracting and fusing spatiotemporal features of PM2.5 is crucial for prediction. • A novel spatiotemporal forecasting framework is proposed. • A second-order residual TCN is developed to extract complex temporal features. • Experiments on real air pollution dataset show our framework's superiority. [ABSTRACT FROM AUTHOR]

Short-term traffic prediction under corrupted or missing data for large-scale transportation networks has become an important and challenging topic in recent decades. Since the critical roads have predictive power on their adjacent roads, this paper proposes a novel hybrid short-term traffic state prediction method based on critical road selection optimization. First, the utility function of the quality of service (QoS) for the critical roads in a large-scale road network is proposed based on the coverage and the data score. Then, the critical road selection optimization model in the transportation networks is presented by selecting an appropriate set of critical roads with the maximum proportion of the total calculation resources to maximize the utility value of the QoS. Also, an innovative critical road selection method is introduced, which is considering the topological structure and the mobility of the urban road network. Subsequently, the traffic speed of the critical roads is regarded as the input of the convolutional long short-term memory neural network to predict the future traffic states of the entire network. Experiment results on the Beijing traffic network indicate that the proposed method outperforms prevailing DL approaches in the case of considering critical road sections. [ABSTRACT FROM AUTHOR]

Accurate PM 2.5 forecasting provides a possibility for establishing an early warning system to notify the public and take precautionary measures to prevent negative effects on ambient air quality and public health. Considering strong seasonal variation in meteorological conditions, in this paper, a seasonal stacked autoencoder model combining seasonal analysis and deep feature learning is proposed for forecasting the hourly PM 2.5 concentration, named DL-SSAE model. The original data are firstly decomposed into four seasonal subseries according to the Chinese calendar, and then the Kendall correlation coefficient method is employed to search inherent relationships between PM 2.5 concentrations and meteorological parameters within 1-h ahead for each seasonal time series. The inherent relationships of each seasonal subseries are finally extracted, learned, and modeled by different deep neural networks (stacked autoencoders for regression), and the hourly PM 2.5 forecasts are yielded. The addressed model is tested by the dataset collected from three environmental monitoring stations in Beijing, China. The results demonstrate that the proposed model outperforms all other considered models with/without seasonality consideration in this paper. [ABSTRACT FROM AUTHOR]

In rainy weather, the accurate prediction of traffic status not only helps road traffic managers to formulate traffic management methods but also helps travelers design travel routes and even adjust travel time. In this paper, based on six-dimensional data (e.g., past and present spatiotemporal traffic status, road network structure, pavement type, water accumulation, and rainfall level), a fuzzy neural network (FNN) prediction system is proposed to predict traffic status. The traffic status evolution trend is related not only to the existing traffic but also to the new traffic demand. Therefore, the FNN prediction system designed includes offline and online parts using the data of the past and the day separately and avoids the forecast of new traffic demand. The fuzzy C-means clustering algorithm is applied to cluster traffic status data under similar rainy weather in the past to form an offline initial dataset, which is used to train FNN weight parameters. The online part uses real-time detection data and the parameters trained by the offline part to further predict the traffic status and returns the prediction errors to the offline part to correct the weight parameters to further improve prediction accuracy. Finally, the FNN prediction system is verified using real Beijing expressway network data. The verification results show that the prediction system can guarantee prediction accuracy and can be used to effectively identify traffic status. [ABSTRACT FROM AUTHOR]

In a multimodal public transport network, transfers are inevitable. Planning and managing an efficient transfer connection is thus important and requires an understanding of the factors that influence those transfers. Existing studies on predicting passenger transfer flows have mainly used transit assignment models based on route choice, which need extensive computation and underlying behavioral assumptions. Inspired by studies that use network properties to estimate public transport (PT) demand, this paper proposes to use the network properties of a multimodal PT system to explain transfer flows. A statistical model is estimated to identify the relationship between transfer flow and the network properties in a joint bus and metro network. Apart from transfer time, the number of stops, and bus lines, the most important network property we propose in this study is transfer accessibility. Transfer accessibility is a newly defined indicator for the geographic factors contributing to the possibility of transferring at a station, given its position in a multimodal PT network, based on an adapted gravity-based measure. It assumes that transfer accessibility at each station is proportional to the number of reachable points of interest within the network and dependent on a cost function describing the effect of distance. The R-squared of the regression model we propose is 0.69, based on the smart card data, PT network data, and Points of Interest (POIs) data from the city of Beijing, China. This suggests that the model could offer some decision support for PT planners especially when complex network assignment models are too computationally intensive to calibrate and use. [ABSTRACT FROM AUTHOR]

With the rapid growth of car ownership, traffic congestion has become one of the most serious social problems. For us, accurate real-time travel time predictions are especially important for easing traffic congestion, enabling traffic control and management, and traffic guidance. In this paper, we propose a method to predict urban road travel time by combining XGBoost and LightGBM machine learning models. In order to obtain a relatively complete data set, we mine the GPS data of Beijing and combine them with the weather feature to consider the obtained 14 features as candidate features. By processing and analyzing the data set, we discussed in detail the correlation between each feature and the travel time and the importance of each feature in the model prediction results. Finally, the 10 important features screened by the LightGBM and XGBoost models were used as key features. We use the full feature set and the key feature set as input to the model to explore the effect of different feature combinations on the prediction accuracy of the model and then compare the prediction results of the proposed fusion model with a single model. The results show that the proposed fusion model has great advantages to urban travel time prediction. [ABSTRACT FROM AUTHOR]

In order to predict more accurately the structural vibration and noise of elevated tracks induced by moving trains, a new prediction method based on the scaled model test is proposed in this paper. A 32-m simply supported box girder bridge used in the Beijing–Shanghai high-speed railway is selected as the prototype for designing and constructing a scaled model test with 10:1 geometric similarity ratio. Both experimental tests and finite element analyses were carried out to verify the similarity relationship between the model and prototype. The test result shows that the scaled model can predict the structural vibration and noise of the prototype, as long as the similarity constants between the prototype and scaled model are correctively determined. Furthermore, a standard finite element analysis model for the scaled model is built. Based on the sensitivity analysis, the model parameters for finite element analysis are updated by minimizing the errors between the measured and calculated modes. The computational results show that the updated model based on the local parameters partitioning works best, and the precision of the modal frequency calculated is noticeably improved after updating, with the average relative error reduced from 5.46% to 3.09%, and the difference of the peak values reduced from 0. 3 5 8 × 1 0 3 m/s2 to 0. 1 8 9 × 1 0 3 m/s2. The calculated dynamic response of the finite element model after updating is basically in line with experimental results, indicating that the updated model can better reflect the dynamic properties of the scaled box girder model. The updated finite element model is useful both for verification with the model test result and for reliable prediction of the dynamic characteristics of the prototype. [ABSTRACT FROM AUTHOR]

Short-term traffic prediction (STTP) is one of the most critical capabilities in Intelligent Transportation Systems (ITS), which can be used to support driving decisions, alleviate traffic congestion and improve transportation efficiency. However, STTP of large-scale road networks remains challenging due to the difficulties of effectively modeling the diverse traffic patterns by high-dimensional time series. Therefore, this paper proposes a framework that involves a deep clustering method for STTP in large-scale road networks. The deep clustering method is employed to supervise the representation learning in a visualized way from the large unlabeled dataset. More specifically, to fully exploit the traffic periodicity, the raw series is first divided into a number of sub-series for triplet generation. The convolutional neural networks (CNNs) with triplet loss are utilized to extract the features of shape by transforming the series into visual images. The shape-based representations are then used to cluster road segments into groups. Thereafter, a model sharing strategy is further proposed to build recurrent NNs-based predictions through group-based models (GBMs). GBM is built for a type of traffic patterns, instead of one road segment exclusively or all road segments uniformly. Our framework can not only significantly reduce the number of prediction models, but also improve their generalization by virtue of being trained on more diverse examples. Furthermore, the proposed framework over a selected road network in Beijing is evaluated. Experiment results show that the deep clustering method can effectively cluster the road segments and GBM can achieve comparable prediction accuracy against the IBM with less number of prediction models. [ABSTRACT FROM AUTHOR]

In this paper, the model output machine learning (MOML) method is proposed for simulating weather consultation, which can improve the forecast results of numerical weather prediction (NWP). During weather consultation, the forecasters obtain the final results by combining the observations with the NWP results and giving opinions based on their experience. It is obvious that using a suitable post-processing algorithm for simulating weather consultation is an interesting and important topic. MOML is a post-processing method based on machine learning, which matches NWP forecasts against observations through a regression function. By adopting different feature engineering of datasets and training periods, the observational and model data can be processed into the corresponding training set and test set. The MOML regression function uses an existing machine learning algorithm with the processed dataset to revise the output of NWP models combined with the observations, so as to improve the results of weather forecasts. To test the new approach for grid temperature forecasts, the 2-m surface air temperature in the Beijing area from the ECMWF model is used. MOML with different feature engineering is compared against the ECMWF model and modified model output statistics (MOS) method. MOML shows a better numerical performance than the ECMWF model and MOS, especially for winter. The results of MOML with a linear algorithm, running training period, and dataset using spatial interpolation ideas, are better than others when the forecast time is within a few days. The results of MOML with the Random Forest algorithm, year-round training period, and dataset containing surrounding gridpoint information, are better when the forecast time is longer. [ABSTRACT FROM AUTHOR]

• A deep learning approach to predicting the electric vehicle (EV) charging demand. • A real-world large EV trajectory dataset was used for model training and validation. • The deep learning approach outperformed traditional time series prediction models. • Input data structures, and sample sizes were not influential to prediction accuracy. Short-term prediction of the Electric Vehicle (EV) charging demand is of great importance to the operation of EV fleets and charging stations. This paper develops a Long Short-Term Memory (LSTM) neural network to predict the EV charging demand at the station level for the next few hours (e.g., 1–5 h), using a unique trajectory dataset containing over 76,000 private EVs in Beijing in January 2018. To explore the performance of the LSTM model, we set up four scenarios by 1) comparing LSTM against two typical time series prediction models, i.e., the Auto-Regressive Moving Average model (ARIMA), and the Multiple Layer Perceptron model (MLP), 2) and investigating how different input data structures, sample sizes, and time spans and intervals would influence model accuracy. The results suggest that the LSTM model outperformed the ARIMA, and MLP models, and their MAPE1 values are 6.83 %, 21.58 %, and 18.31 %, respectively. In addition, we find that the time span and interval tend to be more influential to the LSTM model's prediction accuracy than input data structures, and sample sizes. In general, the LSTM model with a shorter time span or interval (e.g., 1 h) would perform better. [ABSTRACT FROM AUTHOR]

The green growth of Beijing-Tianjin-Hebei (BTH) urban agglomeration plays a leading and exemplary role in overcoming internal resource restrictions, addressing climate change, and supporting China's high-quality growth. From the standpoint of pollution reduction and carbon reduction, this paper first conducts a comprehensive evaluation of the environmental impact based on combined weighting technique. The Logarithmic Mean Divisia Index (LMDI) model is used to decompose the environmental impact drivers in distinct areas. A decoupling effort index is further constructed to measure the effect of various efforts on the decoupling of economic growth and environmental impact, the improved grey Markov model is applied to predict the future trend of regional decoupling efforts. The results of empirical analysis based on data of the BTH region during 2011–2018 show that: 1) the environmental impact index of Beijing is the lowest followed by Tianjin and Hebei; 2) environmental regulation exerts the most significant impact on reducing environmental pressure in Beijing while technology progress and energy intensity have the most significant effect on easing environmental pressure in Tianjin; 3) strong decoupling efforts have been found in Beijing, Tianjin and Hebei, however, such effect is more significant in Beijing; 4) Beijing's decoupling state is mostly driven by regulatory effect, intensity effect, and scale effect, while Tianjin and Hebei's decoupling states are primarily driven by improvements in environmental regulation and energy intensity; 5) according to the forecast outcome of the improved grey Markov technique, a state of strong decoupling effort will be maintained in the BTH area by 2025, and the decoupling effort index in Beijing will remain the highest while the index in Hebei will remain the lowest. • A comprehensive evaluation of the environmental impact of BTH based on combined weighting method is estimated. • Determinants of environmental impact is decomposed as regulatory, technological, intensity, growth and scale effects. • LMDI model is constructed to estimate the five determinants of regional environmental impact. • Decoupling effort approach and improved grey Markov model are used to analyze and predict the status of various decoupling efforts. • Various suggestions are proposed from the perspective of regional heterogeneity. [ABSTRACT FROM AUTHOR]

Building load forecasting is critical for energy saving and carbon emission reduction, as building loads account for a rising percentage of energy consumption. Existing load forecasting methods only target a single building and do not consider the spatial characteristics of different building loads in an architectural complex, making it impossible to effectively forecast loads for all buildings in an architectural complex simultaneously. In this paper, considering the spatial correlation among building loads in an architectural complex, a novel short-term load forecasting method is proposed to improve the load forecasting accuracy for the architectural complex. First, Pearson correlation analysis is carried out to determine the key influencing factors of load, which are treated as multi-information. Then, to realize the load forecasting of all buildings in an architectural complex at the same time, a multi-information fusion model combined with a graph convolutional network and a long-short term memory network is proposed, and spatio-temporal attention modules are included to extract the dynamic spatio-temporal correlations of load. The performance of the proposed model is evaluated using actual load data from a public university in Beijing. When compared to other current methods, the experimental results show that the proposed model not only achieves the best results for architectural complex load forecasting (the largest MAPE is only 6.86%, the smallest R2 and Accuracy reach 0.87 and 0.85, respectively), but also maintains forecasting stability to some extent over a longer forecast period. The proposed method is a meaningful step towards achieving fast and accurate architectural complex load forecasting. [ABSTRACT FROM AUTHOR]

Ultra-short-term load demand forecasting is significant to the rapid response and real-time dispatching of the power demand side. Considering too many random factors that affect the load, this paper combines convolution, long short-term memory (LSTM), and gated recurrent unit (GRU) algorithms to propose an ultra-short-term load forecasting model based on deep learning. Firstly, more than 100,000 pieces of historical load and meteorological data from Beijing in the three years from 2016 to 2018 were collected, and the meteorological data were divided into 18 types considering the actual meteorological characteristics of Beijing. Secondly, after the standardized processing of the time-series samples, the convolution filter was used to extract the features of the high-order samples to reduce the number of training parameters. On this basis, the LSTM layer and GRU layer were used for modeling based on time series. A dropout layer was introduced after each layer to reduce the risk of overfitting. Finally, load prediction results were output as a dense layer. In the model training process, the mean square error (MSE) was used as the objective optimization function to train the deep learning model and find the optimal super parameter. In addition, based on the average training time, training error, and prediction error, this paper verifies the effectiveness and practicability of the load prediction model proposed under the deep learning structure in this paper by comparing it with four other models including GRU, LSTM, Conv-GRU, and Conv-LSTM. [ABSTRACT FROM AUTHOR]

With the boom of big data, the Internet contains more and more personal behavior information, but it is difficult to extract effectively. A model involving multivariate processing capability must be constructed to deal with these time series with complex characteristics. In this paper, a novel hybrid model embedding Baidu Search Index is therefore proposed to implement multi-step ahead subway passenger flow forecasting. Firstly, we collect data from informative Baidu Search Index, reduce dimensionality, and screen out the powerful predictors by statistical analysis. Secondly, we extract matching common modes at similar time scales between the subway passenger flow and screened Baidu Search Index via multivariate mode decomposition being optimized by multi-objective algorithm. Furthermore, to eliminate pseudo statistical causality, we select the optimal combination of modal components between subway passenger flow and its corresponding Baidu Search Index at each time scale by an innovative multi–modal analysis strategy. Thirdly, we reconstruct the forecasting values of each selected optimal combination as the final results. The empirical results of Beijing, Shanghai and Guangzhou show that the proposed model can significantly outperform six benchmark models in both the level and directional accuracy. So introducing Baidu Search Index creates a sound opportunity to enhance the subway passenger flow forecasting ability. [ABSTRACT FROM AUTHOR]

There is an important significance for human health in predicting atmospheric concentration precisely. However, due to the complexity and influence of contingency, atmospheric concentration prediction is a challenging topic. In this paper, we propose a novel hybrid learning method to make point and interval predictions of PM2.5 concentration simultaneously. Firstly, we optimize Sparrow Search Algorithm (SSA) by opposition-based learning, fitness-based learning, and Lévy flight. The experiments show that the improved Sparrow Search Algorithm (FOSSA) outperforms SSA-based algorithms. In addition, the improved Sparrow Search Algorithm (FOSSA) is employed to optimize the initial weights of probabilistic forecasting model with autoregressive recurrent network (DeepAR). Then, the FOSSA–DeepAR learning method is utilized to achieve the point prediction and interval prediction of PM2.5 concentration in Beijing, China. The performance of FOSSA–DeepAR is compared with other hybrid models and a single DeepAR model. Furthermore, hourly data of PM2.5 and O3 concentration in Taian of China, O3 concentration in Beijing, China are used to verify the effectiveness and robustness of the proposed FOSSA–DeepAR learning method. Finally, the empirical results illustrate that the proposed FOSSA–DeepAR learning model can achieve more efficient and accurate predictions in both interval and point prediction. [ABSTRACT FROM AUTHOR]

Urban road intersection bottleneck has become an important factor in causing traffic delay and restricting traffic efficiency. It is essential to explore the prediction of the operating performance at intersections in real-time and formulate corresponding strategies to alleviate intersection delay. However, because of the sophisticated intersection traffic condition, it is difficult to capture the intersection traffic Spatio-temporal features by the traditional data and prediction methods. The development of big data technology and the deep learning model provides us a good chance to address this challenge. Therefore, this paper proposes a multi-task fusion deep learning (MFDL) model based on massive floating car data to effectively predict the passing time and speed at intersections over different estimation time granularity. Moreover, the grid model and the fuzzy C-means (FCM) clustering method are developed to identify the intersection area and derive a set of key Spatio-temporal traffic parameters from floating car data. In order to validate the effectiveness of the proposed model, the floating car data from ten intersections of Beijing with a sampling rate of 3s are adopted for the training and test process. The experiment result shows that the MFDL model enables us to capture the Spatio-temporal and topology feature of the traffic state efficiently. Compared with the traditional prediction method, the proposed model has the best prediction performance. The interplay between these two targeted prediction variables can significantly improve prediction accuracy and efficiency. Thereby, this method predicts the intersection operation performance in real-time and can provide valuable insights for traffic managers to improve the intersection's operation efficiency. [ABSTRACT FROM AUTHOR]

Vegetable price predictions are of great significance to vegetable growers, particularly regarding production and management to ensure a balance in the regional supply and demand of vegetables. In the current paper, in order to improve the accuracy and efficiency of vegetable price forecasting, we propose an optimized neural network combined model based on the induced ordered weighted averaging operator. Our frameworks integrate the fruit fly algorithm (FOA) with the induced ordered weighted averaging (IWOA) operator for an enhanced performance. In particular, the FOA is employed for the parameter optimization of the generalized regression neural network (GRNN) and radial basis function neural network (RBFNN), reducing the adverse influence of man-induced factors in the model construction process and improving the learning ability of both GRNN and RBFNN. The IWOA operator calculates the weights of the single GRNN and RBFNN to address the problem of fixed weights in combination forecasting models. Monthly vegetable price data in Beijing was used to compare our method with nine single forecasting models, revealing that the optimization of the GRNN and RBFNN parameters by the FOA, the prediction accuracy of the FOA-GRNN model and FOA-RBFNN model surpass those of GRNN and RBFNN, respectively. Furthermore, results from four evaluation indexes reveal that the IOWA-based optimized neural network model exhibited a stronger predictive ability than the other nine prediction models. Results demonstrate the effectiveness of our framework for the prediction of vegetable price series, with potential applications in agricultural products of similar characteristics. • The parameter optimization of neural networks by the fruit fly algorithm. • Solving a problem of fixed weights by induced ordered weighted averaging operator. • Our model exhibiting a stronger predictive for the prediction of vegetable price series. • The vegetable price with a clear growth approaching the end of 2020. [ABSTRACT FROM AUTHOR]

• A 3-level fragment division method is proposed for actual vehicle data processing. • The influencing factors of electric vehicle energy consumption are discussed. • A novel data-driven energy consumption prediction framework is proposed. • The driving conditions prediction is integrated in the proposed framework. With increasing mass-adoption of electric vehicles, the energy consumption has become a key performance index to electric vehicle drivers, automakers and policy-makers. Accurate and real-time energy consumption prediction under real-world driving conditions is essential for alleviating the 'range anxiety' and can provide support for optimal battery sizing, energy-efficient route planning and charging infrastructures operation. In this paper, real-world driving data collected from fifty-five electric taxis in Beijing city are obtained and divided into three-level driving fragments. The influencing factors of energy consumption, including vehicle-, environment-, and driver-related factors, are extracted and studied. With the extracted key influencing factors, a novel machine learning-based energy consumption prediction framework integrated with driving condition prediction is proposed and used in actual energy consumption prediction. The real-world trip test results show that a root mean squared error of 0.159kWh (RMSE) and a mean absolute percentage error 12.68% (MAPE) are reached, the RMSE and the MAPE are respectively reduced by 32.05% and by 30.14% compared to the conventional method. [ABSTRACT FROM AUTHOR]

Air pollution, such as PM 2.5 (particulate matter with an aerodynamic equivalent diameter of less than 2.5 μm), PM 10 (particulate matter with an aerodynamic equivalent diameter of less than 10 μm), NO x , and SO x , is a global concern because it may cause many chronic and fatal diseases, especially in developing countries. To better address air pollution problems, an important step is the timely and accurate prediction of air quality. Traditional methods are mainly based on meteorological data, regression model data, remote sensing data and different retrieval methods. Numerous studies on deep learning methods have suggested that these approaches may be able to perform accurate predictions for complex systems. In this paper, a long short-term memory (LSTM) approach for predicting air quality is proposed; moreover, meteorological data are used and Chinese social media is investigated as a proxy for public perceptions and responses for air quality prediction. We gathered daily air quality data, meteorological data and Weibo check-in data for Beijing, China from January 1, 2015 to December 31, 2016. The average sentiment of the related Weibo posts was selected as the public response proxy. The performance of our proposed model is evaluated based on real data. The root-mean-square error (RMSE) and the mean absolute error (MAE) indicated that our method presented better prediction results than traditional methods in terms of the PM 2.5 , PM 10 , O 3 , NO 2 , SO 2 and CO concentrations. We focused on the prediction performance during the 2015 China Victory Day Parade period, during which social and political factors played an important role in air quality predictions. The results indicated that the proposed method, which incorporates public response data, was especially suitable for predicting the air quality in extreme short-term social events and provides a timely social measurement and feedback for environmental problems. • Social media were selected as a proxy for public perceptions for air quality. • LSTM model was proposed for air quality prediction. • Weibo data was suitable for air quality prediction during short-term social events. [ABSTRACT FROM AUTHOR]

When new metro tunnels undercrossing existing tunnels, deformation is inevitably caused in the stratum and the existing structures. However, the calculation results by conventional prediction methods often bring large errors compared to measured or simulated data because the complex influences of the stiffness of existing structures is always neglected. According to the equivalent layered method, an existing tunnel can be considered as an equivalent rock stratum instead. Based on the Peck formula, a theoretical model for predicting the deformations caused by construction of a new tunnel undercrossing an existing tunnel is established. This paper mainly picks the Metro Line 10 undercrossing the Metro Line 1 of Beijing subway as an engineering case study. The comparison shows that results by the prediction model fits the measured data well. The proposed model are widely applicable and provides a new prediction method to study the deformations of existing tunnels and strata caused by the undercrossing new constructions. [ABSTRACT FROM AUTHOR]