Search

A sewer system is a principal element of infrastructure in modern cities, accounting for massive amounts of public investments. Corrosion of manholes in the sewer system is a global issue, and millions of dollars are being spent on the maintenance, restoration, and replacement of deteriorated sewer networks. Concrete manholes in the sewer system are deteriorating due to the attack of sulfuric acid produced by microorganisms in a process termed microbial induced concrete corrosion (MICC), which reduces the lifespan of concrete sewer elements. The objective of this paper is to investigate the correlation between the gas- and liquid-phase sewer environmental factors and hydrogen sulfide concentration in the gas phase. The production, emission, and build-up of hydrogen sulfide gas in manholes is identified as a major cause of MICC in manhole shafts. The field study was conducted in more than 200 manholes in the City of Arlington (Texas, US). The data was collected every minute for 48 h to understand the trends of liquid- and gas-phase parameters such as hydrogen sulfide (H2S concentration), liquid and gas temperature, pH, DO, and relative humidity. The study also examines how gas-phase H2S concentrations vary with season; manhole design, including manholes' depth, slope, and presence of drop; and sewer flow conditions such as velocity and turbulence. Although no strong linear correlation was found between liquid-/gas-phase parameters, the manhole categories were found to play a significant role in H2S generation. The manholes with hydraulic jump generated the highest average H2S concentrations, followed by manholes with drops. High turbulence zones were observed in manholes of both categories, leading to H2S stripping from liquid to gas phase. The highest H2S concentration was recorded in summer, suggesting that higher liquid temperature resulted in increased bacterial activity, which generated greater liquid-phase sulfide. Greater Henry's law constants in summer, due to high temperatures, would have favored transfer of liquid-phase sulfide to the gas phase. [ABSTRACT FROM AUTHOR]

Connected vehicle (CV) data in this paper refer to the in-vehicle telematic data, including trajectories and driving events (e.g., hard braking) collected by vehicle manufacturers when vehicles are moving. Recently manufactured vehicles are equipped with cellular modems and Internet of Things (IoT) devices to collect vehicle data. Such data, after removing personal information, are being redistributed to third-party organizations. Compared to other probe vehicle data, the CV data has a higher penetration rate, ubiquitous coverage, and almost lane-level positioning accuracy. These features pave the road for novel transportation applications in transportation planning and traffic operations. In this paper, we represent a novel framework to estimate the regional link volumes based on the CV data and a deep neural network (DNN) model. The training data are generated according to the link volumes (targeted model output) and the corresponding CV counts (input features) at the same locations. The DNN model's performance was compared with other estimation methods like linear regression and random forest and showed superior performance. The trained DNN model takes ubiquitous CV counts from other locations to estimate the corresponding link volumes. As a case study, the proposed DNN model was trained with a large training data set derived from CV data and time-dependent link counts collected at over 1,200 locations on freeways in the Dallas FortWorth, Texas, area. The results reveal good accuracy and robustness. [ABSTRACT FROM AUTHOR]

In February 2021, Texas was hit by a severe winter storm. The extreme cold weather triggered an unprecedented increase of electricity demand and simultaneous failure of multiple electricity grid components. The dual effect caused a widespread power outage that left millions of Texans without power for days. This paper estimates the indirect economy-wide cascading impact of that power outage. It utilized historical make and use tables between 1997 and 2019 in an inoperability input-output analysis–based economic impact assessment model to quantify the expected indirect cost of the power outage in terms of the loss of gross domestic product of Texas. This research found that expected loss to be approximately $664 million in 2019 values. It also found that in Texas industries such as oil and gas extraction, petroleum, coal products, and so on are particularly vulnerable to such weather-related prolonged power outages. The outcomes of this paper can be used in planning for strategies to make the grid robust, reliable, and resilient to severe weather events. The identification of vulnerable industries can also help in planning for auxiliary capacities so the cascading economic impacts of the weather-related power outages can be reduced. [ABSTRACT FROM AUTHOR]

In this paper, the authors present their efforts in exploring a new type of traffic data, referred to as internet-connected vehicle (ICV) data, for traffic congestion management and operational planning. Most currently manufactured vehicles contain onboard GPS and cellular modules, and they constantly connect to automobile manufacturers' clouds via cellular networks and upload their status. Some automobile manufacturers have recently redistributed the nonpersonal part of such data, such as geolocation, to third-party organizations for innovative applications. Compared with the traditional vehicle GPS data, the ICV data contain high-resolution GPS waypoints accompanied with the vehicles' abnormal moving events (e.g., hard braking). The ICV data also have huge potential in congestion management and operational planning. They explore to identify and analyze traffic congestion on both freeways and arterials using the ICV data. The ICV data adopted for this research are redistributed by Wejo Data Service, representing 10%–15% of all moving vehicles in the Dallas–Fort Worth (DFW) area in Texas. Through one case study for a freeway segment and one for an arterial segment, new traffic performance metrics based on the characteristics of ICV data have been presented. The highlights of these efforts are as follows: (I) queue length and propagation at freeway bottlenecks can be directly measured based on where and when most internet-connected vehicles slow down and join the queue; (II) an internet-connected vehicle's actual delay time on arterials can be directly measured according to its slow movement percentage, without assuming the nondelay travel speed; and (III) the ICV data set are also combined with the high-resolution traffic signal events to generate a ground-truth time-space diagram (TSD) on arterials—a common visualization of arterial signal performance for transportation planning and operations. [ABSTRACT FROM AUTHOR]

Bridge deterioration is inevitable in service, and the inspection and maintenance of bridges are needed to ensure structural integrity. To make cost-effective inspection plans, bridge management departments need degradation models to predict future condition ratings of bridges. Although there have been studies on bridge degradation, the input features of models are selected mostly based on engineering experience, and no effective method has been proposed. Meanwhile, most models based on machine learning (ML) and deep learning (DL) only predict the degradation of bridges in a single year and cannot cover a complete inspection cycle (usually 2 years), providing limited decision support for the transportation departments. Besides, more accurate models are needed to predict the degradation trend of bridges. In response to these problems, an improved ReliefF algorithm is proposed to select features of bridges in the paper. Meanwhile, a new degradation model combining recurrent neural network (RNN) and convolutional neural network (CNN) is established. Historical data of bridges in the US state of Texas from 1992 to 2019 are employed to verify the proposed methods. The result shows that the improved ReliefF algorithm selects the appropriate feature set as the input of the prediction model, and the model accurately predicts the future condition ratings of bridges in the next 3–4 years. The research is beneficial to infrastructure management departments in allocating bridge inspection and maintenance resources reasonably. [ABSTRACT FROM AUTHOR]

Inspecting and assessing existing utility poles has become increasingly important for reducing the vulnerability of power distribution infrastructure systems in disaster situations, which can enhance community resilience. Although vision-based systems have been applied to detect faults in power distribution infrastructures, little research currently exists on assessing component- and network-level failures of utility poles based on their geometric and environmental information. This paper aims to propose a new data-driven approach to support risk-informed decision-making for utility maintenance under extreme wind conditions. Large-scale open-source imagery from Google Street View is used to assess geometric properties of utility poles (i.e., leaning angle). Then the failure probability of utility poles is analyzed under varying conditions (e.g., age, leaning angle, and wind loads) in a three-dimensional virtual city model. The proposed method is tested through case studies in Texas to (1) validate an algorithm for estimating leaning angles of utility poles and (2) understand the progress of failures of leaning utility poles from a network perspective. The outcomes of the case studies demonstrate that the proposed method has the potential to leverage large-scale open-source visual data to assess the vulnerability of utility pole networks that may lead to cascading failures in power distribution infrastructure systems. Based on the proposed virtual environment, the method is expected to enable practitioners to facilitate risk-informed decision-making against disaster situations, which creates an opportunity for prioritizing maintenance tasks regarding power distribution infrastructures. [ABSTRACT FROM AUTHOR]