Search

The growing integration of renewable energy sources into grid-connected microgrids has created new challenges in power generation forecasting and energy management. This paper explores the use of advanced machine learning algorithms, specifically Support Vector Regression (SVR), to enhance the efficiency and reliability of these systems. The proposed SVR algorithm leverages comprehensive historical energy production data, detailed weather patterns, and dynamic grid conditions to accurately forecast power generation. Our model demonstrated significantly lower error metrics compared to traditional linear regression models, achieving a Mean Squared Error of 2.002 for solar PV and 3.059 for wind power forecasting. The Mean Absolute Error was reduced to 0.547 for solar PV and 0.825 for wind scenarios, and the Root Mean Squared Error (RMSE) was 1.415 for solar PV and 1.749 for wind power, showcasing the model's superior accuracy. Enhanced predictive accuracy directly contributes to optimized resource allocation, enabling more precise control of energy generation schedules and reducing the reliance on external power sources. The application of our SVR model resulted in an 8.4% reduction in overall operating costs, highlighting its effectiveness in improving energy management efficiency. Furthermore, the system's ability to predict fluctuations in energy output allowed for adaptive real-time energy management, reducing grid stress and enhancing system stability. This approach led to a 10% improvement in the balance between supply and demand, a 15% reduction in peak load demand, and a 12% increase in the utilization of renewable energy sources. Our approach enhances grid stability by better balancing supply and demand, mitigating the variability and intermittency of renewable energy sources. These advancements promote a more sustainable integration of renewable energy into the microgrid, contributing to a cleaner, more resilient, and efficient energy infrastructure. The findings of this research provide valuable insights into the development of intelligent energy systems capable of adapting to changing conditions, paving the way for future innovations in energy management. Additionally, this work underscores the potential of machine learning to revolutionize energy management practices by providing more accurate, reliable, and cost-effective solutions for integrating renewable energy into existing grid infrastructures. [ABSTRACT FROM AUTHOR]

As artificial intelligence (AI) becomes widespread, there is increasing attention on investigating bias in machine learning (ML) models. Previous research concentrated on classification problems, with little emphasis on regression models. This paper presents an easy-to-apply and effective methodology for mitigating bias in bagging and boosting regression models, that is also applicable to any model trained through minimizing a differentiable loss function. Our methodology measures bias rigorously and extends the ML model's loss function with a regularization term to penalize high correlations between model errors and protected attributes. We applied our approach to three popular tree-based ensemble models: a random forest model (RF), a gradient-boosted model (GBT), and an extreme gradient boosting model (XGBoost). We implemented our methodology on a case study for predicting road-level traffic volume, where RF, GBT, and XGBoost models were shown to have high accuracy. Despite high accuracy, the ML models were shown to perform poorly on roads in minority-populated areas. Our bias mitigation approach reduced minority-related bias by over 50%. [ABSTRACT FROM AUTHOR]

Genetic and agronomic advances consistently lead to an annual increase in global barley yield. Since abiotic stresses (physical environmental factors that negatively affect plant growth) reduce barley yield, it is necessary to predict barley resistance. Artificial intelligence and machine learning (ML) models are new and powerful tools for predicting product resilience. Considering the research gap in the use of molecular markers in predicting abiotic stresses, this paper introduces a new approach called GenPhenML that combines molecular markers and phenotypic traits to predict the resistance of barley genotypes to drought and salinity stresses by ML models. GenPhenML uses feature selection algorithms to determine the most important molecular markers. It then identifies the best model that predicts atmospheric resistance with lower MAE, RMSE, and higher R2. The results showed that GenPhenML with a neural network model predicted the salinity stress resistance score with MAE, RMSE and R2 values of 0.1206, 0.0308 and 0.9995, respectively. Also, the NN model predicted drought stress scores with MAE, RMSE and R2 values of 0.0727, 0.0105 and 0.9999, respectively. The GenPhenML approach was also used to classify barley genotypes as resistant and stress-sensitive. The results showed that the accuracy, accuracy and F1 score of the proposed approach for salinity and drought stress classification were higher than 97%. [ABSTRACT FROM AUTHOR]

Biofiltration is a method of pollution management that utilizes a bioreactor containing live material to absorb and destroy pollutants biologically. In this paper, we investigate mathematical models of biofiltration for mixing volatile organic compounds (VOCs) for instance hydrophilic (methanol) and hydrophobic (α -pinene). The system of nonlinear diffusion equations describes the Michaelis-Menten kinetics of the enzymic chemical reaction. These models represent the chemical oxidation in the gas phase and mass transmission within the air-biofilm junction. Furthermore, for the numerical study of the saturation of α -pinene and methanol in the biofilm and gas state, we have developed an efficient supervised machine learning algorithm based on the architecture of Elman neural networks (ENN). Moreover, the Levenberg-Marquardt (LM) optimization paradigm is used to find the parameters/ neurons involved in the ENN architecture. The approximation to a solutions found by the ENN-LM technique for methanol saturation and α -pinene under variations in different physical parameters are allegorized with the numerical results computed by state-of-the-art techniques. The graphical and statistical illustration of indications of performance relative to the terms of absolute errors, mean absolute deviations, computational complexity, and mean square error validates that our results perfectly describe the real-life situation and can further be used for problems arising in chemical engineering. [ABSTRACT FROM AUTHOR]

Early detection of the adenocarcinoma cancer in colon tissue by means of explainable deep learning, by classifying histological images and providing visual explainability on model prediction. Considering that in recent years, deep learning techniques have emerged as powerful techniques in medical image analysis, offering unprecedented accuracy and efficiency, in this paper we propose a method to automatically detect the presence of cancerous cells in colon tissue images. Various deep learning architectures are considered, with the aim of considering the best one in terms of quantitative and qualitative results. As a matter of fact, we consider qualitative results by taking into account the so-called prediction explainability, by providing a way to highlight on the tissue images the areas that from the model point of view are related to the presence of colon cancer. The experimental analysis, performed on 10,000 colon issue images, showed the effectiveness of the proposed method by obtaining an accuracy equal to 0.99. The experimental analysis shows that the proposed method can be successfully exploited for colon cancer detection and localisation from tissue images. [ABSTRACT FROM AUTHOR]

Leptospirosis is a global disease that impacts people worldwide, particularly in humid and tropical regions, and is associated with significant socio-economic deficiencies. Its symptoms are often confused with other syndromes, which can compromise clinical diagnosis and the failure to carry out specific laboratory tests. In this respect, this paper presents a study of three algorithms (Decision Tree, Random Forest and Adaboost) for predicting the outcome (cure or death) of individuals with leptospirosis. Using the records contained in the government National System of Aggressions and Notification (SINAN, in portuguese) from 2007 to 2017, for the state of Pará, Brazil, where the temporal attributes of health care, symptoms (headache, vomiting, jaundice, calf pain) and clinical evolution (renal failure and respiratory changes) were used. In the performance evaluation of the selected models, it was observed that the Random Forest exhibited an accuracy of 90.81% for the training dataset, considering the attributes of experiment 8, and the Decision Tree presented an accuracy of 74.29 for the validation database. So, this result considers the best attributes pointed out by experiment 10: time first symptoms medical attention, time first symptoms ELISA sample collection, medical attention hospital admission time, headache, calf pain, vomiting, jaundice, renal insufficiency, and respiratory alterations. The contribution of this article is the confirmation that artificial intelligence, using the Decision Tree model algorithm, depicting the best choice as the final model to be used in future data for the prediction of human leptospirosis cases, helping in the diagnosis and course of the disease, aiming to avoid the evolution to death. [ABSTRACT FROM AUTHOR]

Recently, ConvNeXt and blueprint separable convolution (BSConv) constructed from standard ConvNet modules have demonstrated competitive performance in advanced computer vision tasks. This paper proposes an efficient model (BCRN) based on BSConv and the ConvNeXt residual structure for single image super-resolution, which achieves superior performance with very low parametric numbers. Specifically, the residual block (BCB) of the BCRN utilizes the ConvNeXt residual structure and BSConv to significantly reduce the number of parameters. Within the residual block, enhanced spatial attention and contrast-aware channel attention modules are simultaneously introduced to prioritize valuable features within the network. Multiple residual blocks are then stacked to form the backbone network, with Dense connections utilized between them to enhance feature utilization. Our model boasts extremely low parameters compared to other state-of-the-art lightweight models, while experimental results on benchmark datasets demonstrate its excellent performance. The code will be available at https://github.com/kptx666/BCRN. [ABSTRACT FROM AUTHOR]

The advent of Industry 4.0 has significantly promoted the field of intelligent manufacturing, which is facilitated by the development of new technologies are emerging. Robot technology and robot intelligence methods have rapidly developed and been widely applied. Manipulators are widely used in industry, and their control is a crucial research topic. The inverse kinematics solution of manipulators is an important part of manipulator control, which calculates the joint angles required for the end effector to reach a desired position and posture. Traditional inverse kinematics solution algorithms often face the problem of insufficient generalization, and iterative methods have challenges such as large computation and long solution time. This paper proposes a reinforcement learning-based inverse kinematics solution algorithm, called the MAPPO-IK algorithm. The algorithm trains the manipulator agent using the MAPPO algorithm and calculates the difference between the end effector state of the manipulator and the target posture in real-time by designing a reward mechanism, while considering Gaussian distance and cosine distance. Through experimental comparative analysis, the feasibility, computational efficiency, and superiority of this reinforcement learning algorithm are verified. Compared with traditional inverse kinematics solution algorithms, this method has good generalization and supports real-time computation, and the obtained result is a unique solution. Reinforcement learning algorithms have better adaptability to complex environments and can handle different sudden situations in different environments. This algorithm also has the advantages of path planning, intelligent obstacle avoidance, and other advantages in dynamically processing complex environmental scenes. [ABSTRACT FROM AUTHOR]

The mining of open pit mines is widespread in China, and there are many cases of landslide accidents. Therefore, the problem of slope stability is highlighted. The stability of the slope is a factor that directly affects the mining efficiency and the safety of the entire mining process. According to the statistics, there is a 15 percent chance of finding landslide risk in China's large-scale mines. And due to the expansion of the mining scale of the enterprise, the problem of slope stability has become increasingly obvious, which has become a major subject in the study of open-pit mine engineering. In order to better predict the slope stability coefficient, this study takes a mine in China as a case to deeply discuss the accuracy of different algorithms in the stability calculation, and then uses a deep learning algorithm to study the stability under rainfall conditions. The change of the coefficient and the change of the stability coefficient before and after the slope treatment are experimentally studied with the displacement of the monitoring point. The result shows that the safety coefficient calculated by the algorithm in this paper is about 7% lower than that of the traditional algorithm. In the slope stability analysis before treatment, the safety factor calculated by the algorithm in this paper is 1.086, and the algorithm in this paper is closer to reality. In the stability analysis of the slope after treatment, the safety factor calculated by the algorithm in this paper is 1.227, and the stability factor meets the requirements of the specification. It also shows that the deep learning algorithm effectively improves the efficiency of the slope stability factor prediction and improves security during project development. [ABSTRACT FROM AUTHOR]

Cancer is one of the leading causes of death worldwide, making early detection and accurate diagnosis critical for effective treatment and improved patient outcomes. In recent years, machine learning (ML) has emerged as a powerful tool for cancer detection, enabling the development of innovative algorithms that can analyze vast amounts of data and provide accurate predictions. This review paper aims to provide a comprehensive overview of the various ML algorithms and techniques employed for cancer detection, highlighting recent advancements, challenges, and future directions in this field. The main challenge is finding a safe, auditable and reliable analysis method for fundamental scientific publication. Food contaminant analysis is a process of testing food products to identify and quantify the presence of harmful substances or contaminants. These substances can include bacteria, viruses, toxins, pesticides, heavy metals, allergens, and other chemical residues. Machine learning (ML) and artificial intelligence (A.I) proposed as a promising method that possesses excellent potential to extract information with high validity that may be overlooked with conventional analysis techniques and for its capability in a wide range of investigations. A.I technology used in meta-optics can develop optical devices and systems to a higher level in future. Furthermore (M.L.) and (A.I.) play key roles as a health Approach for nano materials NMs safety assessment in environment and human health research. Beside, benefits of ML in design of plasmonic sensors for different applications with improved resolution and detection are convinced. [ABSTRACT FROM AUTHOR]

Benign paroxysmal positional vertigo (BPPV), the most common vestibular disorder, is diagnosed by an examiner changing the posture of the examinee and inducing nystagmus. Among the diagnostic methods used to observe nystagmus, video-nystagmography has been widely used recently because it is non-invasive. A specialist with professional knowledge and training in vertigo diagnosis is needed to diagnose BPPV accurately, but the ratio of vertigo patients to specialists is too high, thus necessitating the need for automated diagnosis of BPPV. In this paper, a convolutional neural network-based nystagmus extraction system, ANyEye, optimized for video-nystagmography data is proposed. A pupil was segmented to track the exact pupil trajectory from real-world data obtained during field inspection. A deep convolutional neural network model was trained with the new video-nystagmography dataset for the pupil segmentation task, and a compensation algorithm was designed to correct pupil position. In addition, a slippage detection algorithm based on moving averages was designed to eliminate the motion artifacts induced by goggle slippage. ANyEye outperformed other eye-tracking methods including learning and non-learning-based algorithms with five-pixel error detection rate of 91.26%. [ABSTRACT FROM AUTHOR]

Cancer is one of the leading causes of death worldwide, making early detection and accurate diagnosis critical for effective treatment and improved patient outcomes. In recent years, machine learning (ML) has emerged as a powerful tool for cancer detection, enabling the development of innovative algorithms that can analyze vast amounts of data and provide accurate predictions. This review paper aims to provide a comprehensive overview of the various ML algorithms and techniques employed for cancer detection, highlighting recent advancements, challenges, and future directions in this field. The main challenge is finding a safe, auditable and reliable analysis method for fundamental scientific publication. Food contaminant analysis is a process of testing food products to identify and quantify the presence of harmful substances or contaminants. These substances can include bacteria, viruses, toxins, pesticides, heavy metals, allergens, and other chemical residues. Machine learning (ML) and artificial intelligence (A.I) proposed as a promising method that possesses excellent potential to extract information with high validity that may be overlooked with conventional analysis techniques and for its capability in a wide range of investigations. A.I technology used in meta-optics can develop optical devices and systems to a higher level in future. Furthermore (M.L.) and (A.I.) play key roles as a health Approach for nano materials NMs safety assessment in environment and human health research. Beside, benefits of ML in design of plasmonic sensors for different applications with improved resolution and detection are convinced. [ABSTRACT FROM AUTHOR]

Benign paroxysmal positional vertigo (BPPV), the most common vestibular disorder, is diagnosed by an examiner changing the posture of the examinee and inducing nystagmus. Among the diagnostic methods used to observe nystagmus, video-nystagmography has been widely used recently because it is non-invasive. A specialist with professional knowledge and training in vertigo diagnosis is needed to diagnose BPPV accurately, but the ratio of vertigo patients to specialists is too high, thus necessitating the need for automated diagnosis of BPPV. In this paper, a convolutional neural network-based nystagmus extraction system, ANyEye, optimized for video-nystagmography data is proposed. A pupil was segmented to track the exact pupil trajectory from real-world data obtained during field inspection. A deep convolutional neural network model was trained with the new video-nystagmography dataset for the pupil segmentation task, and a compensation algorithm was designed to correct pupil position. In addition, a slippage detection algorithm based on moving averages was designed to eliminate the motion artifacts induced by goggle slippage. ANyEye outperformed other eye-tracking methods including learning and non-learning-based algorithms with five-pixel error detection rate of 91.26%. [ABSTRACT FROM AUTHOR]

In the field of machine intelligence and ubiquitous computing, there has been a growing interest in human activity recognition using wearable sensors. Over the past few decades, researchers have extensively explored learning-based methods to develop effective models for identifying human behaviors. Deep learning algorithms, known for their powerful feature extraction capabilities, have played a prominent role in this area. These algorithms can conveniently extract features that enable excellent recognition performance. However, many successful deep learning approaches have been built upon complex models with multiple hyperparameters. This paper examines the current research on human activity recognition using deep learning techniques and discusses appropriate recognition strategies. Initially, we employed multiple convolutional neural networks to determine an effective architecture for human activity recognition. Subsequently, we developed a hybrid convolutional neural network that incorporates a channel attention mechanism. This mechanism enables the network to capture deep spatio-temporal characteristics in a hierarchical manner and distinguish between different human movements in everyday life. Our investigations, using the UCI-HAR, WISDM, and IM-WSHA datasets, demonstrated that our proposed model, which includes cross-channel multi-size convolution transformations, outperformed previous deep learning architectures with accuracy rates of 98.92%, 98.80%, and 98.45% respectively. These results indicate that the suggested model surpasses state-of-the-art approaches in terms of overall accuracy, as supported by the research findings. [ABSTRACT FROM AUTHOR]

Benign paroxysmal positional vertigo (BPPV), the most common vestibular disorder, is diagnosed by an examiner changing the posture of the examinee and inducing nystagmus. Among the diagnostic methods used to observe nystagmus, video-nystagmography has been widely used recently because it is non-invasive. A specialist with professional knowledge and training in vertigo diagnosis is needed to diagnose BPPV accurately, but the ratio of vertigo patients to specialists is too high, thus necessitating the need for automated diagnosis of BPPV. In this paper, a convolutional neural network-based nystagmus extraction system, ANyEye, optimized for video-nystagmography data is proposed. A pupil was segmented to track the exact pupil trajectory from real-world data obtained during field inspection. A deep convolutional neural network model was trained with the new video-nystagmography dataset for the pupil segmentation task, and a compensation algorithm was designed to correct pupil position. In addition, a slippage detection algorithm based on moving averages was designed to eliminate the motion artifacts induced by goggle slippage. ANyEye outperformed other eye-tracking methods including learning and non-learning-based algorithms with five-pixel error detection rate of 91.26%. [ABSTRACT FROM AUTHOR]

The world's population is projected to grow 32% in the coming years, and the number of Muslims is expected to grow by 70%—from 1.8 billion in 2015 to about 3 billion in 2060. Hijri is the Islamic calendar, also known as the lunar Hijri calendar, which consists of 12 lunar months, and it is tied to the Moon phases where a new crescent Moon marks the beginning of each month. Muslims use the Hijri calendar to determine important dates and religious events such as Ramadan, Haj, Muharram, etc. Till today, there is no consensus on deciding on the beginning of Ramadan month within the Muslim community. This is mainly due to the imprecise observations of the new crescent Moon in different locations. Artificial intelligence and its sub-field machine learning have shown great success in their application in several fields. In this paper, we propose the use of machine learning algorithms to help in determining the start of Ramadan month by predicting the visibility of the new crescent Moon. The results obtained from our experiments have shown very good accurate prediction and evaluation performance. The Random Forest and Support Vector Machine classifiers have provided promising results compared to other classifiers considered in this study in predicting the visibility of the new Moon. [ABSTRACT FROM AUTHOR]

The barriers for the development of continuous monitoring of Suspended Sediment Concentration (SSC) in channels/rivers include costs and technological gaps but this paper shows that a solution is feasible by: (i) using readily available high-resolution images; (ii) transforming the images into image analytics to form a modelling dataset; and (iii) constructing predictive models by learning inherent correlation between observed SSC values and their image analytics. High-resolution images were taken of water containing a series of SSC values using an exploratory flume. Machine learning is processed by dividing the dataset into training and testing sets and the paper uses the following models: Generalized Linear Machine (GLM) and Distributed Random Forest (DRF). Results show that each model is capable of reliable predictions but the errors at higher SSC are not fully explained by modelling alone. Here we offer sufficient evidence for the feasibility of a continuous SSC monitoring capability in channels before the next phase of the study with the goal of producing practice guidelines. [ABSTRACT FROM AUTHOR]

With the development of artificial intelligence, big data classification technology provides the advantageous help for the medicine auxiliary diagnosis research. While due to the different conditions in the different sample collection, the medical big data is often imbalanced. The class-imbalance problem has been reported as a serious obstacle to the classification performance of many standard learning algorithms. SMOTE algorithm could be used to generate sample points randomly to improve imbalance rate, but its application is affected by the marginalization generation and blindness of parameter selection. Focusing on this problem, an improved SMOTE algorithm based on Normal distribution is proposed in this paper, so that the new sample points are distributed closer to the center of the minority sample with a higher probability to avoid the marginalization of the expanded data. Experiments show that the classification effect is better when use proposed algorithm to expand the imbalanced dataset of Pima, WDBC, WPBC, Ionosphere and Breast-cancer-wisconsin than the original SMOTE algorithm. In addition, the parameter selection of the proposed algorithm is analyzed and it is found that the classification effect is the best when the distribution characteristics of the original data was maintained best by selecting appropriate parameters in our designed experiments. [ABSTRACT FROM AUTHOR]

Current seismic processing workflows in the oil and gas industry involve several interactions between different experts to optimize the overall data quality in various tasks, such as noise attenuation, velocity analysis and horizon picking. While many machine learning-based approaches have been proposed to support each of those steps, most of them disregard expert interactions to guide the overall optimization. This paper presents geocycles, a cyclic learning approach that mimics this iterative process, which can be applied to different pre-stack seismic processing tasks. Our method refactor these processes considering training, testing, and evaluation sub-tasks, which allow the selection of samples for greedy sequential processes targeting an overall optimum quality for very large seismic datasets. We present encouraging results showing that a cyclic structure and efficient quality metrics improved overall outcomes in up to 128% for two different seismic processing tasks in comparison to a 1-cycle machine learning approach. [ABSTRACT FROM AUTHOR]

Alzheimer's disease (AD) is the most common type of dementia. Its diagnosis and progression detection have been intensively studied. Nevertheless, research studies often have little effect on clinical practice mainly due to the following reasons: (1) Most studies depend mainly on a single modality, especially neuroimaging; (2) diagnosis and progression detection are usually studied separately as two independent problems; and (3) current studies concentrate mainly on optimizing the performance of complex machine learning models, while disregarding their explainability. As a result, physicians struggle to interpret these models, and feel it is hard to trust them. In this paper, we carefully develop an accurate and interpretable AD diagnosis and progression detection model. This model provides physicians with accurate decisions along with a set of explanations for every decision. Specifically, the model integrates 11 modalities of 1048 subjects from the Alzheimer's Disease Neuroimaging Initiative (ADNI) real-world dataset: 294 cognitively normal, 254 stable mild cognitive impairment (MCI), 232 progressive MCI, and 268 AD. It is actually a two-layer model with random forest (RF) as classifier algorithm. In the first layer, the model carries out a multi-class classification for the early diagnosis of AD patients. In the second layer, the model applies binary classification to detect possible MCI-to-AD progression within three years from a baseline diagnosis. The performance of the model is optimized with key markers selected from a large set of biological and clinical measures. Regarding explainability, we provide, for each layer, global and instance-based explanations of the RF classifier by using the SHapley Additive exPlanations (SHAP) feature attribution framework. In addition, we implement 22 explainers based on decision trees and fuzzy rule-based systems to provide complementary justifications for every RF decision in each layer. Furthermore, these explanations are represented in natural language form to help physicians understand the predictions. The designed model achieves a cross-validation accuracy of 93.95% and an F1-score of 93.94% in the first layer, while it achieves a cross-validation accuracy of 87.08% and an F1-Score of 87.09% in the second layer. The resulting system is not only accurate, but also trustworthy, accountable, and medically applicable, thanks to the provided explanations which are broadly consistent with each other and with the AD medical literature. The proposed system can help to enhance the clinical understanding of AD diagnosis and progression processes by providing detailed insights into the effect of different modalities on the disease risk. [ABSTRACT FROM AUTHOR]

In this paper we present a unified framework for extreme learning machines and reservoir computing (echo state networks), which can be physically implemented using a single nonlinear neuron subject to delayed feedback. The reservoir is built within the delay-line, employing a number of "virtual" neurons. These virtual neurons receive random projections from the input layer containing the information to be processed. One key advantage of this approach is that it can be implemented efficiently in hardware. We show that the reservoir computing implementation, in this case optoelectronic, is also capable to realize extreme learning machines, demonstrating the unified framework for both schemes in software as well as in hardware. [ABSTRACT FROM AUTHOR]

An amendment to this paper has been published and can be accessed via a link at the top of the paper. [ABSTRACT FROM AUTHOR]