Search

In this paper, we discuss the implementation of artificial self-awareness mechanisms and self-reflection abilities in deep neural networks. While the current limitations of research prevent achieving cognitive capabilities on par with natural biological entities, the incorporation of basic self-awareness and self-reflection mechanisms in deep learning architectures offers substantial advantages in tackling specific problems across various scientific fields, including geosciences. In the first section, we outline the foundational architecture of our deep learning approach termed Self-Aware Learning (SAL). The subsequent part of the paper highlights the practical benefits of this machine learning methodology through synthetic tests and applications addressed to automatic classification and image analysis of real petrological data sets. We show how Self-Aware Learning allows enhanced accuracy, reduced overfitting problems, and improved performances compared to other existing methods. [ABSTRACT FROM AUTHOR]

Rock fragmentation is an important evaluation indicator for field blasting operations. This paper applies a deep learning-based method, the Segment Anything Model (SAM), to automatically segment rock fragments. To review the SAM's segmentation performance, 83 images of rock fragment collected from the mine site were used as the test dataset. Pixel-level accuracy (PA), intersection over union (IOU), and dice coefficient (Dice) were employed to evaluate the model pixel-level segmentation performance. The results showed that the SAM exhibited excellent segmentation performance on the test data (PA = 94.5%, IOU = 94.4%, Dice = 95.4%). The coefficient of determination (R2) values for the 50% and 80% passing sizes (X50 and X80) were 0.970 and 0.991, respectively, which demonstrated that the SAM could achieve high precision measurement of rock fragmentation. Additionally, the effectiveness of the SAM was further evaluated by comparing it to commercial software, and the generalizability of the SAM was verified on two other datasets. The findings revealed that the SAM not only outperformed the Split-Desktop V 4.0 on the test dataset but also achieved comparable accuracy to previous studies on the two other datasets. The SAM could be regarded as a useful tool to provide fast and accurate feedback for field blasting. [ABSTRACT FROM AUTHOR]

Flotation stands out as a successful and extensively employed method for separating valuable mineral particles from waste rock. The efficiency of this process is subjected to the distinct physicochemical attributes exhibited by various minerals. However, the complex combination of multiple sub-processes within flotation presents challenges in controlling this mechanism and achieving optimal efficiency. Consequently, there is a growing dependence on machine learning methods in mineral processing research. This paper provides a comprehensive overview of machine learning and artificial intelligence techniques, presenting their potential applications in flotation processes. The review demonstrates advancements discussed in scholarly research over the past decade and highlights a growing interest in utilizing machine learning methods for monitoring and optimizing flotation processes, as demonstrated by the increasing number of studies in this field. Recent trends also suggest that the course of flotation process monitoring, and control will increasingly focus on the refinement and deployment of deep learning networks developed specifically for froth image extraction and analysis. [ABSTRACT FROM AUTHOR]

With the rapid development of modern geochemical analysis techniques, massive volumes of data are being generated from various sources and forms, and geochemical data acquisition and analysis have become important tools for studying geochemical processes and environmental changes. However, geochemical data have high-dimensional, nonlinear characteristics, and traditional geochemical data analysis methods have struggled to meet the demands of modern science. Nowadays, the development of big data and artificial intelligence technologies has provided new ideas and methods for geochemical data analysis. However, geochemical research involves numerous fields such as petrology, ore deposit, mineralogy, and others, each with its specific research methods and objectives, making it difficult to strike a balance between depth and breadth of investigation. Additionally, due to limitations in data sources and collection methods, existing studies often focus on a specific discipline or issue, lacking a comprehensive understanding of the bigger picture and foresight for the future. To assist geochemists in identifying research hotspots in the field and exploring solutions to the aforementioned issues, this article comprehensively reviews related studies in recent years, elaborates on the necessity and challenges of combining geochemistry and artificial intelligence, and analyzes the characteristics and research hotspots of the global collaboration network in this field. The study reveals that the investigation into artificial intelligence techniques to address geochemical issues is progressing swiftly. Joint research papers serve as the primary means of contact within a worldwide collaborative network. The primary areas of focus in the ongoing research on the integration of geochemistry and artificial intelligence include methodologies for analyzing geochemical data, environmental modifications, and mineral prospectivity mapping. Geochemical data analysis is currently a significant focus of research, encompassing a range of methods including machine learning and deep learning. Predicting mineral resources for deep space, deep Earth, and deep sea is also a pressing topic in contemporary research. This paper explores the factors driving research interest and future trends, identifies current research challenges, and considers opportunities for future research. [ABSTRACT FROM AUTHOR]

Remote sensing (RS) technology has significantly contributed to geological exploration and mineral resource assessment. However, its effective application in vegetated areas encounters various challenges. This paper aims to provide a comprehensive overview of the challenges and opportunities associated with RS-based lithological identification in vegetated regions which includes the extensively reviewed prior research concerning the identification of lithology in vegetated regions, encompassing the utilized remote sensing data sources, and classification methodologies. Moreover, it offers a comprehensive overview of the application of remote sensing techniques in the domain of lithological mapping. Notably, hyperspectral RS and Synthetic Aperture Radar (SAR) have emerged as prominent tools in lithological identification. In addition, this paper addresses the limitations inherent in RS technology, including issues related to vegetation cover and terrain effects, which significantly impact the accuracy of lithological mapping. To propel further advancements in the field, the paper proposes promising avenues for future research and development. These include the integration of multi-source data to improve classification accuracy and the exploration of novel RS techniques and algorithms. In summary, this paper presents valuable insights and recommendations for advancing the study of RS-based lithological identification in vegetated areas. [ABSTRACT FROM AUTHOR]

Identifying minerals is essential for geology, mineral exploration, engineering, and environmental sciences. Recent advances in machine learning have illustrated its potential as a fast, cost-effective, and reliable tool for identifying minerals from photographs or photomicrographs. However, in the recent literature, few studies have been dedicated to image acquisition. Machine learning generally requires reproducible, high-quality data to perform complicated tasks such as mineral identification to avoid common pitfalls. In this paper, we propose a practical image acquisition protocol for optical microscopes. This protocol focuses on ensuring reproducibility and enhancing image quality. To favor reproducibility, we detail dealing with camera errors, using reference color gauges, and establishing experimental parameters such as the external light source and temperature. For image enhancement, we explain the importance of lighting and its impact on machine learning precision, selection of the objective, and white balance calibration. In addition, we trialed the protocol on heavy mineral concentrate from till samples (20 species) with a typical deep learning model and it revealed that minor lighting modification (<5% difference in one channel) significantly increased misclassification rates: kyanite from 6.4% to 24.9% and monazite from 6.5% to 42.9%. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal Minerals, focusing on the design, modeling, optimization, and control of the flotation process. Flotation is a widely used technique for separating valuable and gangue minerals, but it requires sophisticated control systems that can be costly to implement and maintain. To address these challenges, predictive models have emerged as economically viable solutions. The special issue features papers that explore innovative approaches for modeling, optimizing, and controlling flotation processes, with a focus on hydrodynamic and kinetic models, gas dispersion, and computational tools and algorithms. These techniques have the potential to significantly improve the efficiency of the flotation process and are expected to become effective solutions for monitoring and controlling it in the future. [Extracted from the article]

Intelligent prospecting and prediction are important research foci in the field of mineral resource exploration. To solve the problem of the performance degradation of deep convolutional neural networks, enhancing the attention to target information and suppressing unnecessary feature information, this paper proposes a new prospecting prediction method based on a two-dimensional convolutional neural network (CNN2D). This method mainly uses known Cu deposits as the positive sample labels, adopts the sliding window method for data enhancement, and uses the window area as a unit to extract spatial variation features. It is important to supplement squeeze-and-excitation networks (SENets) to add an attention mechanism to the channel dimension, assign a weight value to each feature layer, and finally make prospecting predictions by matching the features of the known deposit window area and the features of the unknown window area. This method allows the neural network to focus on certain characteristic channels and realizes prospecting prediction in the case where there are few known deposits so that the deep learning method can be more effectively used for the prospecting prediction of mineralization. Based on geological data, geochemical exploration data of water system sediments, and aeromagnetic data, and via this method, this study carried out prospecting prediction of Cu deposits in the Zhunuo area of Tibet and predicted 12 favorable Cu prospecting prediction areas. Combined with previous research results and field exploration, the predicted result is consistent with the established mineralization and prospecting pattern and has good prospects for Cu deposit prospecting. [ABSTRACT FROM AUTHOR]

Recent studies have demonstrated the potential of machine learning methods for fast and accurate mineral classification based on microscope thin sections. Such methods can be extremely useful to support geoscientists during the phases of operational geology, especially when mineralogical and petrological data are fully integrated with other geological and geophysical information. In order to be effective, these methods require robust machine learning models trained on pre-labeled data. Furthermore, it is mandatory to optimize the hyper-parameters of the machine learning techniques in order to guarantee optimal classification accuracy and reliability. Nowadays, deep learning algorithms are widely applied for image analysis and automatic classification in a large range of Earth disciplines, including mineralogy, petrography, paleontology, well-log analysis, geophysical imaging, and so forth. The main reason for the recognized effectiveness of deep learning algorithms for image analysis is that they are able to quickly learn complex representations of images and patterns within them. Differently from traditional image-processing techniques based on handcrafted features, deep learning models automatically learn and extract features from the data, capturing, in almost real-time, complex relationships and patterns that are difficult to manually define. Many different types of deep learning models can be used for image analysis and classification, including fully connected deep neural networks (FCNNs), convolutional neural networks (CNNs or ConvNet), and residual networks (ResNets). In this paper, we compare some of these techniques and verify their effectiveness on the same dataset of mineralogical thin sections. We show that the different deep learning methods are all effective techniques in recognizing and classifying mineral images directly in the field, with ResNets outperforming the other techniques in terms of accuracy and precision. In addition, we compare the performance of deep learning techniques with different machine learning algorithms, including random forest, naive Bayes, adaptive boosting, support vector machine, and decision tree. Using quantitative performance indexes as well as confusion matrixes, we demonstrate that deep neural networks show generally better classification performances than the other approaches. Furthermore, we briefly discuss how to expand the same workflow to other types of images and geo-data, showing how this deep learning approach can be generalized to a multiscale/multipurpose methodology addressed to the analysis and automatic classification of multidisciplinary information. This article has tutorial purposes, too. For that reason, we will explain, with a didactical level of detail, all the key steps of the workflow. [ABSTRACT FROM AUTHOR]

In the beneficiation of quartz sand, hydraulic classification is a primary way to obtain quartz production in various size fractions. It is essential for plants to measure the particle size of quartz sand during the classification, in time to evaluate the classification efficiency. However, the traditional manual-screening method consumes labor and time, while the particle-size analyzer is expensive. Thus, a size-detection method of quartz-sand particle is proposed in this paper, which is based on a deep learning semantic-segmentation network Fully Convolutional Networks (FCN)-ResNet50. The FCN-ResNet50 network sand segments images, and the average particle size of quartz sand is obtained after converting the pixel-particle size to physical-particle size. Using deep learning, the quartz sand with particle sizes of −40 + 70 (0.212–0.38 mm), −70 + 100 (0.15–0.212 mm), −100 + 140 (0.109–0.15 mm), and −140 + 400 (0.038–0.109 mm) meshes, can be measured directly. The results showed that the validation accuracy of the FCN-ResNet50 was over 97%, and the loss value was approximately 0.2. Compared with the UNet-Mobile and Deeplab-Xception, the average error of particle-size detection was approximately 0.01 mm, which was close to the manual calibration-software results. This method has the advantages of quick sampling and low equipment costs, increasing the hydraulic-classification efficiency of quartz sand and promoting automation in the concentrator. [ABSTRACT FROM AUTHOR]

This paper focuses on the scientific problem of quantitative mineralization prediction at large depth in the Zaozigou gold deposit, west Qinling, China. Five geological and geochemical indicators are used to establish geological and geochemical quantitative prediction model. Machine learning and Deep learning algorithms are employed for 3D Mineral Prospectivity Mapping (MPM). Especially, the Student Teacher Ore-induced Anomaly Detection (STOAD) model is proposed based on the knowledge distillation (KD) idea combined with Deep Auto-encoder (DAE) network model. Compared to DAE, STOAD uses three outputs for anomaly detection and can make full use of information from multiple levels of data for greater overall robustness. The results show that the quantitative mineral resources prediction by applying the STOAD model has a good performance, where the value of Area Under Curve (AUC) is 0.97. Finally, three main mineral exploration targets are delineated for further investigation. [ABSTRACT FROM AUTHOR]

The identification of minerals is indispensable in geological analysis. Traditional mineral identification methods are highly dependent on professional knowledge and specialized equipment which often consume a lot of labor. To solve this problem, some researchers use machine learning algorithms to quickly identify a single mineral in images. However, in the natural environment, minerals often exist in an associated form, which makes the identification impossible with traditional machine learning algorithms. For the identification of associated minerals, this paper proposes a deep learning model based on the transformer and multi-label image classification. The model uses transformer architecture to model mineral images and outputs the probability of the existence of various minerals in an image. The experiments on 36 common minerals show that the model can achieve a mean average precision of 85.26%. The visualization of the class activation mapping indicates that our model can roughly locate the identified minerals. [ABSTRACT FROM AUTHOR]

In recent years, with the integration and development of artificial intelligence technology and geology, traditional geological prospecting has begun to change to intelligent prospecting. Intelligent prospecting mainly uses machine learning technology to predict the prospecting target area by mining the correlation between geological variables and metallogenic characteristics, which usually requires a large amount of data for training. However, there are some problems in the actual research, such as fewer geological sample data and irregular mining features, which affect the accuracy and reliability of intelligent prospecting prediction. Taking the Pangxidong study area in Guangdong Province as an example, this paper proposes a deep learning framework (SKT) for prospecting target prediction based on selective knowledge transfer and carries out intelligent prospecting target prediction research based on geochemical data in Pangxidong. The irregular features of different scales in the mining area are captured by dilation convolution, and the weight parameters of the source network are selectively transferred to different target networks for training, so as to increase the generalization performance of the model. A large number of experimental results show that this method has obvious advantages over other state-of-the-art methods in the prediction of prospecting target areas, and the prediction effect in the samples with mines is greatly improved, which can effectively alleviate the problems of a small number of geological samples and irregular features of mining areas in prospecting prediction. [ABSTRACT FROM AUTHOR]

In large coal preparation plants with a capacity of 30 million tons/year, the belt speed can reach 7 m/s and the thickness of the material layer can reach 500 mm. Therefore, in high-throughput and complex environments, the problem exists that harmful feeding materials such as iron and gangue are not easily detected, and thus fault diagnosis in the crushers lags behind. Therefore, it is necessary to extract the equipment operation signals from the noisy production environment and identify the feeding materials. Currently, there is no systematic research on signal processing and image classification of crusher feeding materials, while the convolutional neural network (CNN) is outstanding in computer vision. In this paper, sound and vibration signals of the feeding materials are denoised by spectral subtraction and transformed into feature images by continuous wavelet transforms. Then, an image classification model based on CNN is built for these feature images to study its classification mechanism and performance. The results show that the model classification accuracy is respectively 84.0%, 93.5% and 80.1% in coal–iron–wood classification, coal–iron classification, and coal–wood classification. The good classification performance for coal, iron and wood can satisfy the practical demands to remove the harmful feeding materials, which provides the core technical support for the establishment of operating status monitoring and fault diagnosis system of crushing equipment. [ABSTRACT FROM AUTHOR]

Recent developments in smart mining technology have enabled the production, collection, and sharing of a large amount of data in real time. Therefore, research employing machine learning (ML) that utilizes these data is being actively conducted in the mining industry. In this study, we reviewed 109 research papers, published over the past decade, that discuss ML techniques for mineral exploration, exploitation, and mine reclamation. Research trends, ML models, and evaluation methods primarily discussed in the 109 papers were systematically analyzed. The results demonstrated that ML studies have been actively conducted in the mining industry since 2018, mostly for mineral exploration. Among the ML models, support vector machine was utilized the most, followed by deep learning models. The ML models were evaluated mostly in terms of their root mean square error and coefficient of determination. [ABSTRACT FROM AUTHOR]

The use of drones in mining environments is one way in which data pertaining to the state of a site in various industries can be remotely collected. This paper proposes a combined system that employs a 6-bands multispectral image capturing camera mounted on an Unmanned Aerial Vehicle (UAV) drone, Spectral Angle Mapping (SAM), as well as Artificial Intelligence (AI). Depth possessing multispectral data were captured at different flight elevations. This was in an attempt to find the best elevation where remote identification of magnetite iron sands via the UAV drone specialized in collecting spectral information at a minimum accuracy of +/− 16 nm was possible. Data were analyzed via SAM to deduce the cosine similarity thresholds at each elevation. Using these thresholds, AI algorithms specialized in classifying imagery data were trained and tested to find the best performing model at classifying magnetite iron sand. Considering the post flight logs, the spatial area coverage of 338 m2, a global classification accuracy of 99.7%, as well the per-class precision of 99.4%, the 20 m flight elevation outputs presented the best performance ratios overall. Thus, the positive outputs of this study suggest viability in a variety of mining and mineral engineering practices. [ABSTRACT FROM AUTHOR]

This paper presents a computer-vision-based methodology for automatic image-based classification of 2042 training images and 284 unseen (test) images divided into 68 categories of gemstones. A series of feature extraction techniques (33 including colour histograms in the RGB, HSV and CIELAB space, local binary pattern, Haralick texture and grey-level co-occurrence matrix properties) were used in combination with different machine-learning algorithms (Logistic Regression, Linear Discriminant Analysis, K-Nearest Neighbour, Decision Tree, Random Forest, Naive Bayes and Support Vector Machine). Deep-learning classification with ResNet-18 and ResNet-50 was also investigated. The optimal combination was provided by a Random Forest algorithm with the RGB eight-bin colour histogram and local binary pattern features, with an accuracy of 69.4% on unseen images; the algorithms required 0.0165 s to process the 284 test images. These results were compared against three expert gemmologists with at least 5 years of experience in gemstone identification, who obtained accuracies between 42.6% and 66.9% and took 42–175 min to classify the test images. As expected, the human experts took much longer than the computer vision algorithms, which in addition provided, albeit marginal, higher accuracy. Although these experiments included a relatively low number of images, the superiority of computer vision over humans is in line with what has been reported in other areas of study, and it is encouraging to further explore the application in gemmology and related areas. [ABSTRACT FROM AUTHOR]

Mineral recognition is of importance in geological research. Traditional mineral recognition methods need professional knowledge or special equipment, are susceptible to human experience, and are inconvenient to carry in some conditions such as in the wild. The development of computer vision provides a possibility for convenient, fast, and intelligent mineral recognition. Recently, several mineral recognition methods based on images using a neural network have been proposed for this aim. However, these methods do not exploit features extracted from the backbone network or available information of the samples in the mineral dataset sufficiently, resulting in low recognition accuracy. In this paper, a method based on feature fusion and online hard sample mining is proposed to improve recognition accuracy by using only mineral photo images. This method first fuses multi-resolution features extracted from ResNet-50 to obtain comprehensive information of mineral photos, and then proposes the weighted top-k loss to emphasize the learning of hard samples. Based on a dataset consisting of 14,986 images of 22 common minerals, the proposed method with 10-fold cross-validation achieves a Top1 accuracy of 88.01% on the validation image set, surpassing those of Inception-v3 and EfficientNet-B0 by a margin of 1.88% and 1.29%, respectively, which demonstrates the good prospect of the proposed method for convenient and reliable mineral recognition using mineral photos only. [ABSTRACT FROM AUTHOR]

The study of the petrographic structure of medium- and high-rank coals is important from both a cognitive and a utilitarian point of view. The petrographic constituents and their individual characteristics and features are responsible for the properties of coal and the way it behaves in various technological processes. This paper considers the application of convolutional neural networks for coal petrographic images segmentation. The U-Net-based model for segmentation was proposed. The network was trained to segment inertinite, liptinite, and vitrinite. The segmentations prepared manually by a domain expert were used as the ground truth. The results show that inertinite and vitrinite can be successfully segmented with minimal difference from the ground truth. The liptinite turned out to be much more difficult to segment. After usage of transfer learning, moderate results were obtained. Nevertheless, the application of the U-Net-based network for petrographic image segmentation was successful. The results are good enough to consider the method as a supporting tool for domain experts in everyday work. [ABSTRACT FROM AUTHOR]

In mining operations, an ore is separated into its constituents through mineral processing methods, such as flotation. Identifying the type of minerals contained in the ore in advance aids greatly in performing faster and more efficient mineral processing. The human eye can recognize visual information in three wavelength regions: red, green, and blue. With hyperspectral imaging, high resolution spectral data that contains information from the visible light wavelength region to the near infrared region can be obtained. Using deep learning, the features of the hyperspectral data can be extracted and learned, and the spectral pattern that is unique to each mineral can be identified and analyzed. In this paper, we propose an automatic mineral identification system that can identify mineral types before the mineral processing stage by combining hyperspectral imaging and deep learning. By using this technique, it is possible to quickly identify the types of minerals contained in rocks using a non-destructive method. As a result of experimentation, the identification accuracy of the minerals that underwent deep learning on the red, green, and blue (RGB) image of the mineral was approximately 30%, while the result of the hyperspectral data analysis using deep learning identified the mineral species with a high accuracy of over 90%. [ABSTRACT FROM AUTHOR]