Search

Floating LiDAR systems (FLSs) may replace conventional offshore met masts, and they have been developed well in Europe. However, before using them in Japan, we must determine whether they demonstrate the same performance under the unique East-Asian meteorological and oceanographic conditions. Therefore, herein, we investigate the performance of FLSs by focusing on the differences among models. Four independent wind datasets from three FLSs were simultaneously verified against a reference met mast and vertical LiDAR at a Japanese site. The data availability was confirmed to vary from 62.7 to 98.0% over the period at 63 m. This was strongly affected by the system availability of the buoy and LiDAR, suggesting that buoy system robustness is key to better campaigns with higher data availability. The 10 min averaged wind speed and direction largely satisfied the Carbon Trust's key performance indicators, with a low sensitivity to wave conditions depending on the buoy shape. The standard deviation of the wind speed and turbulence intensity had poorer accuracy than that of the 10 min averaged statistics because of the wave-induced buoy motion, especially for small buoys. In short, this paper provides an overview of a measurement by FLS in Japan. Also, the unique verification with multiple units suggests the need for a low-motion buoy or motion compensation to improve the measurement accuracy of the turbulence component. [ABSTRACT FROM AUTHOR]

Day-ahead electricity price forecasting (DAEPF) holds critical significance for stakeholders in energy markets, particularly in areas with large amounts of renewable energy sources (RES) integration. In Japan, the proliferation of RES has led to instances wherein day-ahead electricity prices drop to nearly zero JPY/kWh during peak RES production periods, substantially affecting transactions between electricity retailers and consumers. This paper introduces an innovative DAEPF framework employing a Convolutional Neural Network–Long Short-Term Memory (CNN–LSTM) model designed to predict day-ahead electricity prices in the Kyushu area of Japan. To mitigate the inherent uncertainties associated with neural networks, a novel ensemble learning approach is implemented to bolster the DAEPF model's robustness and prediction accuracy. The CNN–LSTM model is verified to outperform a standalone LSTM model in both prediction accuracy and computation time. Additionally, applying a natural logarithm transformation to the target day-ahead electricity price as a pre-processing technique has proven necessary for higher prediction accuracy. A novel "policy-versus-policy" strategy is proposed to address the prediction problem of the zero prices, halving the computation time of the traditional two-stage method. The efficacy of incorporating a suite of multimodal features: areal day-ahead electricity price, day-ahead system electricity price, areal actual power generation, areal meteorological forecasts, calendar forecasts, alongside the rolling features of areal day-ahead electricity price, as explanatory variables to significantly enhance DAEPF accuracy has been validated. With the full integration of the proposed features, the CNN–LSTM ensemble model achieves its highest accuracy, reaching performance metrics of R 2 , MAE, and RMSE of 0.787, 1.936 JPY/kWh, and 2.630 JPY/kWh, respectively, during the test range from 1 March 2023 to 31 March 2023, underscoring the advantages of a comprehensive, multi-dimensional approach to DAEPF. [ABSTRACT FROM AUTHOR]

As the global energy landscape transitions towards a more sustainable future, hydrogen has emerged as a promising energy carrier due to its potential to decarbonize various sectors. However, the economic competitiveness of hydrogen production by water electrolysis strongly depends on renewable energy source (RES) availability. Thus, it is necessary to overcome the challenges related to the intermittent nature of RESs. This paper presents a comprehensive techno-economic analysis of complementing green hydrogen production with grid electricity. An evaluation model for the levelized cost of hydrogen (LCOH) is proposed, considering both CO2 emissions and the influence of RES fluctuations on electrolyzers. A minimum load restriction is required to avoid crossover gas. Moreover, a new operation strategy is developed for hydrogen production plants to determine optimal bidding in the grid electricity market to minimize the LCOH. We evaluate the feasibility of the proposed approach with a case study based on data from the Kyushu area in Japan. The results show that the proposed method can reduce the LCOH by 11% to 33%, and increase hydrogen productivity by 86% to 140%, without significantly increasing CO2 emission levels. [ABSTRACT FROM AUTHOR]