Search

With a large proportion of wind farms connected to the power grid, it brings more pressure on the stable operation of power systems in shorter time scales. Efficient and accurate scheduling, operation control and decision making require high time resolution power forecasting algorithms with higher accuracy and real-time performance. In this paper, we innovatively propose a high temporal resolution wind power forecasting method based on a light convolutional architecture—DC_LCNN. The method starts from the source data and novelly designs the dual-channel data input mode to provide different combinations of feature data for the model, thus improving the upper limit of the learning ability of the whole model. The dual-channel convolutional neural network (CNN) structure extracts different spatial and temporal constraints of the input features. The light global maximum pooling method replaces the flat operation combined with the fully connected (FC) forecasting method in the traditional CNN, extracts the most significant features of the global method, and directly performs data downscaling at the same time, which significantly improves the forecasting accuracy and efficiency of the model. In this paper, the experiments are carried out on the 1 s resolution data of the actual wind field, and the single-step forecasting task with 1 s ahead of time and the multi-step forecasting task with 1~10 s ahead of time are executed, respectively. Comparing the experimental results with the classical deep learning models in the current field, the proposed model shows absolute accuracy advantages on both forecasting tasks. This also shows that the light architecture design based on simple deep learning models is also a good solution in performing high time resolution wind power forecasting tasks. [ABSTRACT FROM AUTHOR]

Under the premise of ensuring the safe and stable operation of a wind–thermal–storage power system, this paper proposes an optimization model aimed at improving its overall economic efficiency and effectively reducing the peak-to-valley load difference. The model transforms the multi-objective optimization problem to solve a feasible interval of weight coefficients. We introduce a novel fusion model, where a Convolutional Neural Network (CNN) is melded with a Long Short-Term Memory Network (LSTM) to form the target network structure. Additionally, for datasets with limited samples, we incorporate a Self-Attention Mechanism (SAM) into the Model-Agnostic Meta-Learning (MAML). Ultimately, we build an MAML-SAM-CNN-LSTM network model to solve the interval of weight coefficients. An arithmetic validation of a modified IEEE 30-node system demonstrates that the MAML-SAM-CNN-LSTM network proposed in this paper can adeptly solve the feasible intervals of weight coefficients in the optimization model of the wind-thermal storage system. This is achieved under the constraints of the specified wind-thermal storage power system operation indexes. The evaluation indexes of the network model, including its accuracy, precision, recall, and F1 score, all exceed 98.72%, 98.57%, 98.30%, and 98.57%, respectively. This denotes a superior performance compared to the other three network models, offering an effective reference for optimizing decision-making and facilitating the enhanced realization of multi-objective, on-demand scheduling in the wind-thermal storage power system. [ABSTRACT FROM AUTHOR]

Recent advancements in the integration of artificial intelligence (AI) and machine learning (ML) with physical sciences have led to significant progress in addressing complex phenomena governed by nonlinear partial differential equations (PDEs). This paper explores the application of novel operator learning methodologies to unravel the intricate dynamics of flame instability, particularly focusing on hybrid instabilities arising from the coexistence of Darrieus–Landau (DL) and Diffusive–Thermal (DT) mechanisms. Training datasets encompass a wide range of parameter configurations, enabling the learning of parametric solution advancement operators using techniques such as parametric Fourier Neural Operator (pFNO) and parametric convolutional neural networks (pCNNs). Results demonstrate the efficacy of these methods in accurately predicting short-term and long-term flame evolution across diverse parameter regimes, capturing the characteristic behaviors of pure and blended instabilities. Comparative analyses reveal pFNO as the most accurate model for learning short-term solutions, while all models exhibit robust performance in capturing the nuanced dynamics of flame evolution. This research contributes to the development of robust modeling frameworks for understanding and controlling complex physical processes governed by nonlinear PDEs. [ABSTRACT FROM AUTHOR]

To enhance the operational efficiency and fault detection accuracy of hydroelectric units, this paper proposes a parallel convolutional neural network model that integrates the Gramian angular summation field (GASF) with an Improved coati optimization algorithm–parallel convolutional neural network (ICOA-PCNN). Additionally, to further improve the model's accuracy in fault identification, a multi-head self-attention mechanism (MSA) and support vector machine (SVM) are introduced for a secondary optimization of the model. Initially, the GASF technique converts one-dimensional time series signals into two-dimensional images, and a COA-CNN dual-branch model is established for feature extraction. To address the issues of uneven population distribution and susceptibility to local optima in the COA algorithm, various optimization strategies are implemented to improve its global search capability. Experimental results indicate that the accuracy of this model reaches 100%, significantly surpassing other nonoptimized models. This research provides a valuable addition to fault diagnosis technology for modern hydroelectric units. [ABSTRACT FROM AUTHOR]

For the advancement of smart grids, solar power generation predictions have become an important research topic. In the case of using traditional modeling methods, excessive computational costs may be incurred and it is difficult for these methods to learn the multi-variable dependencies of the data. Therefore, in this paper, a deep learning model was used to combine convolutional neural networks and long short-term memory recurrent network predictions. This method enables hourly power generation one day into the future. Convolutional neural networks are used to extract the features of multiple time series, while long short-term memory neural networks predict multivariate outcomes simultaneously. In order to obtain more accurate prediction results, we performed feature selection on meteorological features and combined the selected weather features to train the prediction model. We further distinguished sunny- and rainy-day models according to the predicted daily rainfall conditions. In the experiment, it was shown that the method of combining meteorological features further reduced the error. Finally, taking into account the differences in climate conditions between the northern and southern regions of Taiwan, the experimental results of case studies involving multiple regions were evaluated to verify the proposed method. The results showed that training combined with selected meteorological features can be widely used in regions with different climates in Taiwan. [ABSTRACT FROM AUTHOR]

The charging behavior of electric vehicle users is highly stochastic, which makes the short-term prediction of charging load at electric vehicle charging stations difficult. In this paper, a data-driven hybrid model optimized by the improved dung beetle optimization algorithm (IDBO) is proposed to address the problem of the low accuracy of short-term prediction. Firstly, the charging station data are preprocessed to obtain clear and organized load data, and the input feature matrix is constructed using factors such as temperature, date type, and holidays. Secondly, the optimal CNN-BiLSTM model is constructed using convolutional neural network (CNN) and Bi-directional Long Short-Term Memory (BiLSTM), which realizes the feature extraction of the input matrix and better captures the hidden patterns and regularities in it. Then, methods such as Bernoulli mapping are used to improve the DBO algorithm and its hyperparameters; for example, hidden neurons of the hybrid model are tuned to further improve the model prediction accuracy. Finally, a simulation experiment platform is established based on MATLAB R2023a to validate the example calculations on the historical data of EV charging stations in the public dataset of ANN-DATA, and comparative analyses are carried out. The results show that compared with the traditional models such as CNN, BiLSTM and PSO-CNN-BiLSTM, the coefficient of determination of the model exceeds 0.8921 and the root mean square error is maintained at about 4.413 on both the training and test sets, which proves its effectiveness and stability. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) is a crucial and intricate electrical occurrence observed in various types of electrical equipment. Identifying and characterizing PDs is essential for upholding the integrity and reliability of electrical assets. This paper proposes an ensemble methodology aiming to strike a balance between the model complexity and the predictive performance in PD pattern recognition. A simple convolutional neural network (SCNN) was constructed to efficiently decrease the model parameters (quantities). A quadratic support vector machine (QSVM) was established and ensembled with the SCNN model to effectively improve the PD recognition accuracy. The input for QSVM consisted of the circular local binary pattern (CLBP) extracted from the enhanced image. A testing prototype with three types of PD was constructed and 3D phase-resolved pulse sequence (PRPS) spectrograms were measured and recorded by ultra-high frequency (UHF) sensors. The proposed methodology was compared with three existing lightweight CNNs. The experiment results from the collected dataset emphasize the benefits of the proposed method, showcasing its advantages in high recognition accuracy and relatively few mode parameters, thereby rendering it more suitable for PD pattern recognition on resource-constrained devices. [ABSTRACT FROM AUTHOR]

To enhance the accuracy of theft detection for electricity consumers, this paper introduces a novel strategy based on the fusion of the dual-time feature and deep learning methods. Initially, considering electricity-consumption features at dual temporal scales, the paper employs temporal convolutional networks (TCN) with a long short-term memory (LSTM) multi-level feature extraction module (LSTM-TCN) and deep convolutional neural network (DCNN) to parallelly extract features at these scales. Subsequently, the extracted features are coupled and input into a fully connected (FC) layer for classification, enabling the precise detection of theft users. To validate the method's effectiveness, real electricity-consumption data from the State Grid Corporation of China (SGCC) is used for testing. The experimental results demonstrate that the proposed method achieves a remarkable detection accuracy of up to 94.7% during testing, showcasing excellent performance across various evaluation metrics. Specifically, it attained values of 0.932, 0.964, 0.948, and 0.986 for precision, recall, F1 score, and AUC, respectively. Additionally, the paper conducts a comparative analysis with mainstream theft identification approaches. In the comparison of training processes, the proposed method exhibits significant advantages in terms of identification accuracy and fitting degree. Moreover, with adjustments to the training set proportions, the proposed method shows minimal impact, indicating robustness. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) is a common issue in power transformers that can lead to catastrophic failures if left undetected. Time reversal (TR) is a well-known technique in signal processing that can reconstruct signals by reversing the direction of time. The paper investigates the use of time reversal and the integration of time reversal with convolution neural networks (CNNs) for diagnosing PD in power transformers. We compare the performance of these techniques on a dataset of PD signals collected from power transformers. We propose a novel method of using time reversal as a pre-processing step to improve the accuracy of CNNs on noisy or distorted signals. Our experimental results demonstrate that this approach can significantly enhance the performance of CNNs on various datasets, including speech, audio, and image datasets. This paper provides a novel approach to signal processing and demonstrates the potential of time reversal as a pre-processing step in CNNs. [ABSTRACT FROM AUTHOR]

This document discusses the challenges of achieving high-power quality in modern power grids with a large share of distributed power production, particularly due to the integration of renewable energy sources (RES). The variable nature of RES can lead to disturbances and power quality degradation. The document highlights the importance of voltage source converters and control systems in enabling the flexible operation of RES. It also mentions the concept of microgrids, which are closely connected to power quality and other factors such as the Internet of Things and cyber security. The document includes eight research papers covering various topics related to power quality analysis and control of renewable energy sources in power grids. These topics include power factor correction, supercapacitor parameters identification, pulse width modulation, disturbance analysis, vibration analysis of motors, control of converters, phasor measurement units, and optimization of controller parameters. The document concludes by expressing gratitude to the authors, staff, and reviewers involved in the research papers. [Extracted from the article]

Power load prediction is fundamental for ensuring the reliability of power grid operation and the accuracy of power demand forecasting. However, the uncertainties stemming from power generation, such as wind speed and water flow, along with variations in electricity demand, present new challenges to existing power load prediction methods. In this paper, we propose an improved Convolutional Neural Network–Bidirectional Long Short-Term Memory (CNN-BILSTM) model for analyzing power load in systems affected by uncertain power conditions. Initially, we delineate the uncertainty characteristics inherent in real-world power systems and establish a data-driven power load model based on fluctuations in power source loads. Building upon this foundation, we design the CNN-BILSTM model, which comprises a convolutional neural network (CNN) module for extracting features from power data, along with a forward Long Short-Term Memory (LSTM) module and a reverse LSTM module. The two LSTM modules account for factors influencing forward and reverse power load timings in the entire power load data, thus enhancing model performance and data utilization efficiency. We further conduct comparative experiments to evaluate the effectiveness of the proposed CNN-BILSTM model. The experimental results demonstrate that CNN-BILSTM can effectively and more accurately predict power loads within power systems characterized by uncertain power generation and electricity demand. Consequently, it exhibits promising prospects for industrial applications. [ABSTRACT FROM AUTHOR]

Predicting the remaining useful life (RUL) of lithium-ion batteries is crucial for enhancing their reliability and safety. Addressing the issue of inaccurate RUL predictions caused by the nonlinear decay resulting from capacity regeneration, this paper proposes an indirect lithium-ion battery RUL prediction method based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and convolutional neural network (CNN)–bidirectional gated recurrent unit (BiGRU). The method extracts Health Indicators (HI) from the battery-charging stage and employs CEEMDAN to decompose HI into several components. These components are then input into a component prediction model for forecasting. Finally, the predicted component results are fused and input into a capacity prediction model to achieve indirect RUL prediction. Validation is conducted using the lithium-ion battery dataset provided by NASA. The results indicate that, under prediction starting points (STs) of 80 and 100, the maximum average absolute errors do not exceed 0.0096 and 0.0081, and the maximum root mean square errors do not exceed 0.0196 and 0.0115, demonstrating high precision and reliability. [ABSTRACT FROM AUTHOR]

The complex environmental impact makes it difficult to predict wind speed with high precision for multiple wind turbines. Most existing research methods model the temporal dependence of wind speeds, ignoring the spatial correlation between wind turbines. In this paper, we propose a multi-wind turbine wind speed prediction model based on Weighted Diffusion Graph Convolution and Gated Attention Network (WDGCGAN). To address the strong nonlinear correlation problem among multiple wind turbines, we use the maximal information coefficient (MIC) method to calculate the correlation weights between wind turbines and construct a weighted graph for multiple wind turbines. Next, by applying Diffusion Graph Convolution (DGC) transformation to the weight matrix of the weighted graph, we obtain the spatial graph diffusion matrix of the wind farm to aggregate the high-order neighborhood information of the graph nodes. Finally, by combining the DGC with the gated attention recurrent unit (GAU), we establish a spatio-temporal model for multi-turbine wind speed prediction. Experiments on the wind farm data in Massachusetts show that the proposed method can effectively aggregate the spatio-temporal information of wind turbine nodes and improve the prediction accuracy of multiple wind speeds. In the 1h prediction task, the average RMSE of the proposed model is 28% and 33.1% lower than that of the Long Short-Term Memory Network (LSTM) and Convolutional Neural Network (CNN), respectively. [ABSTRACT FROM AUTHOR]

The electricity market is constantly evolving, being driven by factors such as market liberalization, the increasing use of renewable energy sources (RESs), and various economic and political influences. These dynamics make it challenging to predict wholesale electricity prices. Accurate short-term forecasting is crucial to maintaining system balance and addressing anomalies such as negative prices and deviations from predictions. This paper investigates short-term electricity price forecasting using historical time series data and employs advanced deep learning algorithms. First, four deep learning models are implemented and proposed, which are a convolutional neural network (CNN) with an integrated attention mechanism, a hybrid CNN followed by a gated recurrent unit model (CNN-GRU) with an attention mechanism, and two ensemble learning models, which are a soft voting ensemble and a stacking ensemble model. Also, the optimized version of a transformer model, the Multi-Head Attention model, is introduced. Finally, the perceptron model is used as a benchmark for comparison. Our results show excellent prediction accuracy, particularly in the hybrid CNN-GRU model with attention, thereby achieving a mean absolute percentage error (MAPE) of 6.333%. The soft voting ensemble model and the Multi-Head Attention model also performed well, with MAPEs of 6.125% and 6.889%, respectively. These findings are significant, as previous studies have not shown high performance with transformer models and attention mechanisms. The presented results offer promising insights for future research in this field. [ABSTRACT FROM AUTHOR]

AC-DC hybrid distribution grids realize power transmission through tie lines. Accurately characterizing the power exchange capacity between regional grids while ensuring safe grid operation is the basis for the coordinated scheduling of resources in interconnected distribution grids. However, most of the current AC/DC hybrid models are linear, and it is challenging to ensure the accuracy criteria of the obtained feasible regions. In this paper, a two-stage multi-segment boundary approximation method is proposed to characterize the feasible region of hybrid distribution grid tie line operation. Information such as security operation constraints are mapped to the feasible region of the boundary tie line to accurately characterize the transmission exchange capacity of the tie line. To avoid the limitations of linear models, the method uses a nonlinear model to iteratively search for boundary points of the feasible region. This ensures high accuracy in approximating the real feasible region shape and capacity limitations. A convolutional neural network (CNN) is then utilized to map the given boundary and cost information to obtain an estimated equivalent operating cost function for the contact line, overcoming the inability of previous methods to capture nonlinear cost relationships. This provides the necessary cost information in a data-driven manner for the economic dispatch of hybrid AC-DC distribution networks. Numerical tests demonstrate the effectiveness of the method in improving coordination accuracy while preserving regional grid privacy. The key innovations are nonlinear modeling of the feasible domain of the contact line and nonlinear cost fitting for high-accuracy dispatch. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach for optimizing wind farm control through the utilization of a combined model predictive control method. In contrast to conventional methods of controlling active and reactive power in wind farms, the suggested approach integrates a wind power prediction model driven by a neural network and a state-space model for wind turbines. This combination facilitates a more precise forecast of active power, thereby enabling the dynamic prediction of the range of reactive power output from the wind turbines. When combined with the equation of state in wind farm space, it is possible to accurately optimize the reactive power of a wind farm. Furthermore, the impact of active power on voltage fluctuations in the wind farm collector system was examined. The utilization of model predictive control enhances voltage regulation, optimizes system redundancy, and increases the reactive capacity. Sensitivity coefficients were calculated using analytical methods to enhance computational efficiency and to resolve issues related to convergence. In order to validate the proposed methodology and control scheme, a wind farm simulation model comprising 20 turbines was developed to assess the feasibility of the scheme. [ABSTRACT FROM AUTHOR]

Accurate estimation of Li-ion battery capacity is critical for a battery management system (BMS). This paper proposes an innovative method which combines a convolutional neural network and incremental capacity analysis (ICA). In the present approach, the voltage and temperature, which significantly affect the ICA curve during the discharging process, are adopted as the inputs for CNN. Rather than extracting feature parameters of an IC curve, as is carried out in the available research, the present method uses the whole ICA curve as the input to avoid complicated feature extraction and correlation analysis. The results show that the maximum error of capacity estimation is less than 4.7%, the rectified mean squared error is less than 1.3% for each battery, and the overall RMSE is below 1.12%. [ABSTRACT FROM AUTHOR]

This research delineates a pivotal advancement in the domain of sustainable energy systems, with a focused emphasis on the integration of renewable energy sources—predominantly wind and solar power—into the hydrogen production paradigm. At the core of this scientific endeavor is the formulation and implementation of a deep-learning-based framework for short-term localized weather forecasting, specifically designed to enhance the efficiency of hydrogen production derived from renewable energy sources. The study presents a comprehensive evaluation of the efficacy of fully connected neural networks (FCNs) and convolutional neural networks (CNNs) within the realm of deep learning, aimed at refining the accuracy of renewable energy forecasts. These methodologies have demonstrated remarkable proficiency in navigating the inherent complexities and variabilities associated with renewable energy systems, thereby significantly improving the reliability and precision of predictions pertaining to energy output. The cornerstone of this investigation is the deployment of an artificial intelligence (AI)-driven weather forecasting system, which meticulously analyzes data procured from 25 distinct weather monitoring stations across Latvia. This system is specifically tailored to deliver short-term (1 h ahead) forecasts, employing a comprehensive sensor fusion approach to accurately predicting wind and solar power outputs. A major finding of this research is the achievement of a mean squared error (MSE) of 1.36 in the forecasting model, underscoring the potential of this approach in optimizing renewable energy utilization for hydrogen production. Furthermore, the paper elucidates the construction of the forecasting model, revealing that the integration of sensor fusion significantly enhances the model's predictive capabilities by leveraging data from multiple sources to generate a more accurate and robust forecast. The entire codebase developed during this research endeavor has been made available on an open access GIT server. [ABSTRACT FROM AUTHOR]

With the rapid growth in the proportion of renewable energy access and the structural complexity of distributed energy systems, traditional microgrid (MG) scheduling methods that rely on mathematical optimization models and expert experience are facing significant challenges. Therefore, it is essential to present a novel scheduling technique with high intelligence and fast decision-making capacity to realize MGs' automatic operation and regulation. This paper proposes an optimal scheduling decision-making method for MGs based on deep neural networks (DNN). Firstly, a typical mathematical scheduling model used for MG operation is introduced, and the limitations of current methods are analyzed. Then, a two-stage optimal scheduling framework comprising day-ahead and intra-day stages is presented. The day-ahead part is solved by mixed integer linear programming (MILP), and the intra-day part uses a convolutional neural network (CNN)—bidirectional long short-term memory (Bi LSTM) for high-speed rolling decision making, with the outputs adjusted by a power correction balance algorithm. Finally, the validity of the model and algorithm of this paper are verified by arithmetic case analysis. [ABSTRACT FROM AUTHOR]

This document is a correction notice for a research paper titled "A Drone Based Transmission Line Components Inspection System with Deep Learning Technique." The authors have identified errors in the figures and main body paragraphs of the paper and have provided corrected versions of the figures. They have also made changes to the abstract and introduction sections. The paper discusses the use of a drone to detect and analyze transmission line components for defects, utilizing deep learning techniques and convolutional neural networks. The authors acknowledge the errors in the original paper and apologize for any confusion caused. The research is funded by the Korean Ministry of the Interior and Safety. The authors of the paper are Zahid Ali Siddiqui and Unsang Park. [Extracted from the article]

Photovoltaic (PV) fault detection is crucial because undetected PV faults can lead to significant energy losses, with some cases experiencing losses of up to 10%. The efficiency of PV systems depends upon the reliable detection and diagnosis of faults. The integration of Artificial Intelligence (AI) techniques has been a growing trend in addressing these issues. The goal of this systematic review is to offer a comprehensive overview of the recent advancements in AI-based methodologies for PV fault detection, consolidating the key findings from 31 research papers. An initial pool of 142 papers were identified, from which 31 were selected for in-depth review following the PRISMA guidelines. The title, objective, methods, and findings of each paper were analyzed, with a focus on machine learning (ML) and deep learning (DL) approaches. ML and DL are particularly suitable for PV fault detection because of their capacity to process and analyze large amounts of data to identify complex patterns and anomalies. This study identified several AI techniques used for fault detection in PV systems, ranging from classical ML methods like k-nearest neighbor (KNN) and random forest to more advanced deep learning models such as Convolutional Neural Networks (CNNs). Quantum circuits and infrared imagery were also explored as potential solutions. The analysis found that DL models, in general, outperformed traditional ML models in accuracy and efficiency. This study shows that AI methodologies have evolved and been increasingly applied in PV fault detection. The integration of AI in PV fault detection offers high accuracy and effectiveness. After reviewing these studies, we proposed an Artificial Neural Network (ANN)-based method for PV fault detection and classification. [ABSTRACT FROM AUTHOR]

The load forecasting research for an NPS faces challenges including a high model accuracy, non-sharing of data, and a high communication cost. This paper proposes a load forecasting method for an NPS, based on efficient federated transfer learning (FTL). The adversarial feature extractor is added on the basis that FTL can effectively transfer the parameter features of the non-mask load to the local load data, and make up for the loss of mask load prediction accuracy. In order to improve the efficiency of the gradient compression of federated learning (FL), a depth dynamic threshold compression sensing method is proposed, which replaces the sparse signal in compressed sensing via the U-Net model and achieves an observation dimension reduction through a convolutional neural network (CNN). The experimental results show that the mean absolute percentage error (MAPE) and the root-mean-square error (RMSE) of the load forecasting method proposed in this paper are reduced by 9.6% and 2.31 kW, on average, when the load data are covered up to different degrees. Compared with the traditional FL model, the proposed compression algorithm saves 23.5% of the communication cost, without changing the accuracy of the model. The proposed prediction framework is easily interpretable, and robust under different validation metrics. [ABSTRACT FROM AUTHOR]

With the steady increase in the use of renewable energy sources in the energy sector, new challenges arise, especially the unpredictability of these energy sources. This uncertainty complicates the management, planning, and development of energy systems. An effective solution to these challenges is short-term forecasting of the output of photovoltaic power plants. In this paper, a novel method for short-term production prediction was explored which involves continuous photography of the sky above the photovoltaic power plant. By analyzing a series of sky images, patterns can be identified to help predict future photovoltaic power generation. A hybrid model that integrates both a Convolutional Neural Network (CNN) and a Long Short-Term Memory (LSTM) for short-term production forecasting was developed and tested. This model effectively detects spatial and temporal patterns from images and power output data, displaying considerable prediction accuracy. In particular, a 74% correlation was found between the model's predictions and actual future production values, demonstrating the model's efficiency. The results of this paper suggest that the hybrid CNN-LSTM model offers an improvement in prediction accuracy and practicality compared to traditional forecasting methods. This paper highlights the potential of Deep Learning in improving renewable energy practices, particularly in power prediction, contributing to the overall sustainability of power systems. [ABSTRACT FROM AUTHOR]

Central air conditioning in large buildings is an important demand-response resource due to its large load power and strong controllability. Demand-response-oriented air conditioning load modeling needs to calculate the room temperature. The room temperature calculation models commonly used in the existing research cannot easily and accurately calculate the room temperature change of large buildings. Therefore, in order to obtain the temperature change of a large building and its corresponding power potential, this paper first proposes a building model based on CNN (convolutional neural network). Then, in order to fully apply the demand-response potential of the central air conditioning load, this paper puts forward an evaluation method of the load-reduction potential of the central air conditioning cluster based on pre-cooling and develops an economic load-reduction strategy according to the different energy consumption of different buildings in the pre-cooling stage. Finally, multiple building examples with different building parameters and temperature comfort ranges are set up, and the economic advantages of the proposed strategy are illustrated by Cplex solution examples. [ABSTRACT FROM AUTHOR]

An arc fault is the leading cause of electrical fire. Aiming at the problems of difficulty in manually extracting features, poor generalization ability of models and low prediction accuracy in traditional arc fault detection algorithms, this paper proposes a fault arc detection method based on the fusion of channel attention mechanism and residual network model. This method is based on the channel attention mechanism to perform global average pooling of information from each channel of the feature map assigned by the residual block while ignoring the local spatial data to enhance the detection and recognition rate of the fault arc. This paper introduces a one-dimensional depth separable convolution (1D-DS) module to reduce the network model parameters and shorten the time of single prediction samples. The experimental results show that the F1 score of the network model for arc fault detection under mixed load conditions is 98.07%, and the parameter amount is reduced by 46.06%. The method proposed in this paper dramatically reduces the parameter quantity, floating-point number and time complexity of the network structure while ensuring a high recognition rate, which improves the real-time response ability to detect arc fault. It has a guiding significance for applying arc fault on the edge side. [ABSTRACT FROM AUTHOR]

Deep learning (DL) networks are a popular choice for short-term load forecasting (STLF) in the residential sector. Hybrid DL methodologies based on convolutional neural networks (CNNs) and long short-term memory networks (LSTMs) have a higher forecasting accuracy than conventional statistical STLF techniques for different types of single-household load series. However, existing load forecasting methodologies are often inefficient when a high load demand persists for a few hours in a day. Peak load consumption is explicitly depicted as a tail in the probability distribution function (PDF) of the load series. Due to the diverse and uncertain nature of peak load demands, DL methodologies have difficulty maintaining consistent forecasting results, particularly when the PDF of the load series has a longer tail. This paper proposes a multihousehold load forecasting strategy based on the collective moment measure (CMM) (which is obtained from the PDF of the load series), data augmentation, and a CNN. Each load series was compared and ordered through CMM indexing, which helped maintain a minimum or constant shifting variance in the dataset inputted to the CNN. Data augmentation was used to enlarge the input dataset and solve the existing data requirement issues of the CNN. With the ordered load series and data augmentation strategy, the simulation results demonstrated a significant improvement in the performance of both single-household and multihousehold load forecasting. The proposed method predicts day-ahead multihousehold loads simultaneously and compares the results based on a single household. The forecasting performance of the proposed method for six different household groups with 10, 20, 30, 50, 80, and 100 household load series was evaluated and compared with those of existing methodologies. The mean absolute percentage error of the prediction results for each multihousehold load series could be improved by more than 3%. This study can help advance the application of DL methods for household load prediction under high-load-demand conditions. [ABSTRACT FROM AUTHOR]

A large proportion of photovoltaic (PV) power generation is connected to the power grid, and its volatility and stochasticity have significant impacts on the power system. Accurate PV power forecasting is of great significance in optimizing the safe operation of the power grid and power market transactions. In this paper, a novel dual-channel PV power forecasting method based on a temporal convolutional network (TCN) is proposed. The method deeply integrates the PV station feature data with the model computing mechanism through the dual-channel model architecture; utilizes the combination of multihead attention (MHA) and TCN to extract the multidimensional spatio-temporal features between other meteorological variables and the PV power; and utilizes a single TCN to fully extract the temporal constraints of the power sequence elements. The weighted fusion of the dual-channel feature data ultimately yields the ideal forecasting results. The experimental data in this study are from a 26.52 kW PV power plant in central Australia. The experiments were carried out over seven different input window widths, and the two models that currently show superior performance within the field of PV power forecasting: the convolutional neural network (CNN), and the convolutional neural network combined with a long and short-term memory network (CNN_LSTM), are used as the baseline models. The experimental results show that the proposed model and the baseline models both obtained the best forecasting performance over a 1-day input window width, while the proposed model exhibited superior forecasting performance compared to the baseline model. It also shows that designing model architectures that deeply integrate the data input method with the model mechanism has research potential in the field of PV power forecasting. [ABSTRACT FROM AUTHOR]

In nuclear power plants, the loss-of-coolant accident (LOCA) stands out as the most prevalent and consequential incident. Accurate breach size diagnosis is crucial for the mitigation of LOCAs, and identifying the cause of an accident can prevent catastrophic consequences. Traditional methods mostly focus on combining model algorithms and utilize intricate composite model neural network architectures. However, it is crucial to investigate whether greater complexity necessarily leads to better performance. In addition, the consideration of the impact of dataset construction and data preprocessing on model performance is also needed for model building. This paper proposes a framework named DeepLOCA-Lattice to experiment with different preprocessing approaches to fundamental deep learning models for a comprehensive analysis of the diagnosis of LOCA breach size. The DeepLOCA-Lattice involves data preprocessing via the lattice algorithm and equal-interval partitioning and deep-learning-based models, including the multi-layer perceptron (MLP), recurrent neural networks (RNNs), convolutional neural networks (CNNs), and the transformer model in LOCA breach size diagnosis. After conducting rigorous ablation experiments, we have discovered that even rudimentary foundational models can achieve accuracy rates that exceed 90%. This is a significant improvement when compared to the previous models, which yield an accuracy rate of lower than 50%. The results interestingly demonstrate the superior performance and efficacy of the fundamental deep learning model, with an effective dataset construction approach. It elucidates the presence of a complex interplay among diagnostic scales, sliding window size, and sliding stride. Furthermore, our investigation reveals that the model attains its highest accuracy within the discussed range when utilizing a smaller sliding stride size and a longer sliding window length. This study could furnish valuable insights for constructing models for LOCA breach size estimation. [ABSTRACT FROM AUTHOR]

In this paper, an innovative approach for the fast estimation of the mutual inductance between transmitting and receiving coils for Dynamic Wireless Power Transfer Systems (DWPTSs) is implemented. To this end, a Convolutional Neural Network (CNN) is used; an image representing the geometry of two coils that are partially misaligned is the input of the CNN, while the output is the corresponding inductance value. Finite Element Analyses are used for the computation of the inductance values needed for CNN training. This way, thanks to a fast and accurate inductance estimated by the CNN, it is possible to properly manage the power converter devoted to charge the battery, avoiding the wind up of its controller when it attempts to transfer power in poor coupling conditions. [ABSTRACT FROM AUTHOR]

Wind turbine energy generators operate in a variety of environments and often under harsh operational conditions, which can result in the mechanical failure of wind turbines. In order to ensure the efficient operation of wind turbines, the detection of any abnormality in the mechanics is particularly important. In this paper, a method for detecting abnormalities in the bearings of wind turbine energy generators, based on the cascade deep learning model, is proposed. First, data on the mechanics of wind turbine generators were collected, and the correlation between the data was studied in order to select the parameters related to the bearing temperature. Then, the logical relationship between the observation parameters and the target parameters was established based on a one-dimensional convolutional neural network (CNN) and a long short-term memory (LSTM) network, and the difference between the predicted temperature and the actual temperature was assessed using the root mean square error evaluation model. Finally, a numerical example was used to verify the operational data from a wind farm unit in northwest China. The results show that the CNN-LSTM model proposed in this paper can detect abnormalities earlier in the state of the main bearing than the LSTM model, and the CNN-LSTM model can detect abnormalities in the main bearing that the LSTM network cannot find. [ABSTRACT FROM AUTHOR]

Nuclear power is a type of clean and green energy; however, there is a risk of radioactive material leakage when accidents occur. When radioactive material leaks from nuclear power plants, it has a great impact on the environment and personnel safety. In order to enhance the safety of nuclear power plants and support the operator's decisions under accidental circumstances, this paper proposes a fault diagnosis method for nuclear power plants based on the sparrow search algorithm (SSA) optimized by the CNN-LSTM network. Firstly, the convolutional neural network (CNN) was used to extract features from the data before they were then combined with the long short-term memory (LSTM) neural network to process time series data and form a CNN-LSTM model. Some of the parameters in the LSTM neural network need to be manually tuned based on experience, and the settings of these parameters have a great impact on the overall model results. Therefore, this paper selected the sparrow search algorithm with a strong search capability and fast convergence to automatically search for the hand-tuned parameters in the CNN-LSTM model, and finally obtain the SSA-CNN-LSTM model. This model can classify the types of accidents that occur in nuclear power plants to reduce the nuclear safety hazards caused by human error. The experimental data are from a personal computer transient analyzer (PCTRAN). The results show that the classification accuracy of the SSA-CNN-LSTM model for the nuclear power plant fault classification problem is as high as 98.24%, which is 4.80% and 3.14% higher compared with the LSTM neural network and CNN-LSTM model, respectively. The superiority of the sparrow search algorithm for optimizing model parameters and the feasibility and accuracy of the SSA-CNN-LSTM model for nuclear power plant fault diagnosis were verified. [ABSTRACT FROM AUTHOR]

In recent years, lithium-ion batteries have gained significant attention due to their crucial role in various applications, such as electric vehicles and renewable energy storage. Accurate prediction of the remaining useful life (RUL) of these batteries is essential for optimizing their performance and ensuring reliable operation. In this paper, we propose a novel methodology for RUL prediction using an individual control chart (ICC) to identify and remove degraded data, a convolutional neural network (CNN) to smooth the noise of sensor data and long short-term memory (LSTM) networks to effectively capture both spatial and temporal dependencies within battery data, enabling accurate RUL estimation. We evaluate our proposed model using a comprehensive dataset, and experimental results demonstrate its superior performance compared to existing methods. Our findings highlight the potential of ICC-CNN-LSTM for RUL prediction in lithium-ion batteries and provide valuable insights for future research. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries are a key technology for the electrification of the transport sector and the corresponding move to renewable energy. It is vital to determine the condition of lithium-ion batteries at all times to optimize their operation. Because of the various loading conditions these batteries are subjected to and the complex structure of the electrochemical systems, it is not possible to directly measure their condition, including their state of charge. Instead, battery models are used to emulate their behavior. Data-driven models have become of increasing interest because they demonstrate high levels of accuracy with less development time; however, they are highly dependent on their database. To overcome this problem, in this paper, the use of a data augmentation method to improve the training of artificial neural networks is analyzed. A linear regression model, as well as a multilayer perceptron and a convolutional neural network, are trained with different amounts of artificial data to estimate the state of charge of a battery cell. All models are tested on real data to examine the applicability of the models in a real application. The lowest test error is obtained for the convolutional neural network, with a mean absolute error of 0.27%. The results highlight the potential of data-driven models and the potential to improve the training of these models using artificial data. [ABSTRACT FROM AUTHOR]

In this paper, we address several issues with existing methods for predicting the residual electrical life of railway relays. These issues include the difficulty of single feature prediction in characterizing the degradation process, the neglect of temporal and backward–forward correlations in the degradation process, and low prediction accuracy. To overcome these challenges, we propose a novel approach that combines convolutional neural networks (CNNs) and bidirectional long short-term memory (BiLSTM) to facilitate the life prediction of railway relays and provide an accurate data basis for the maintenance of railway relays. Firstly, we collected voltage and current signals from railway relay electrical life tests and extracted feature parameters that captured the relay's operating state. Next, we applied Spearman correlation coefficient analysis combined with random forest importance analysis to perform double-feature selection. This process eliminates redundant feature parameters and identifies the optimal feature subset. Finally, we constructed a convolutional neural network bidirectional long short-term memory (CNN BiLSTM) prediction model to accurately predict the remaining electrical life of the railway relay. Through our analysis of the prediction results, we observed that the CNN BiLSTM model achieves an effective prediction accuracy of 96.3%. This accuracy is significantly higher, more stable, and more practical compared to other prediction models such as recurrent neural networks (RNNs), long short-term memory (LSTM), and BiLSTM models. Overall, our proposed CNN BiLSTM model offers higher accuracy, better stability, and greater practicality in predicting the remaining electrical life of railway relays. [ABSTRACT FROM AUTHOR]

To solve the problem of feature selection and error correction after mode decomposition and improve the ability of power load forecasting models to capture complex time series information, a two-stage short-term power load forecasting method based on recursive feature elimination with a cross validation (RFECV) algorithm and time convolution network–efficient channel attention mechanism–long short-term memory network (TCN–ECA–LSTM) is presented. First, the load sequence is decomposed into a relatively stable set of modal components using variational mode decomposition. Then, the RFECV-based method filters the feature set of each modal component to construct the best feature set. Finally, a two-stage prediction model based on TCN–ECA–LSTM is established. The first stage predicts each modal component and the second stage reconstructs the load forecast based on the predicted value of the previous stage. This paper takes actual data from New South Wales, Australia, as an example, and the results show that the method proposed in this paper can build the feature set reliably and efficiently and has a higher accuracy than the conventional prediction model. [ABSTRACT FROM AUTHOR]

This paper presents a small and efficient model for predicting NOx emissions from coal-fired boilers. The raw data collected are processed by the min–max scale method and converted into a multivariate time series. The overall model's architecture is mainly based on building blocks consisting of separable convolutional neural networks and efficient channel attention (ECA) modules. The experimental results show that the model can learn good representations from sufficient data covering different operation conditions. These results also suggest that ECA modules can improve the model's performance. The comparative study shows our model's strong performance compared to other NOx prediction models. Then, we demonstrate the effectiveness of the model proposed in this paper in terms of predicting NOx emissions. [ABSTRACT FROM AUTHOR]

Highlights: EIS was used to estimate the SOH of LIBs found to be fast and effective. It is more convenient to use CNN to extract features of EIS data automatically. The improved ECM method and IPSO-CNN-BiLSTM method are proposed in this paper. IPSO algorithm was first proposed to applied to the problem of optimizing the initial parameters of the neural networks. The state of health (SOH) is critical to the efficient and reliable use of lithium-ion batteries (LIBs). Recently, the SOH estimation method based on electrochemical impedance spectroscopy (EIS) has been proven effective. In response to different practical applications, two models for SOH estimation are proposed in this paper. Aiming at based on the equivalent circuit model (ECM) method, a variety of ECMs are proposed. Used EIS to predict the ECM, the results show that the improved method ensures the correctness of the ECM and improves the estimation results of SOH. Aiming at a data-driven algorithm, proposes a convolution neural network (CNN) to process EIS data which can not only extract the key points but also simplifies the complexity of manual feature extraction. The bidirectional long short-term memory (BiLSTM) model was used for serial regression prediction. Moreover, the improved Particle Swarm Optimization (IPSO) algorithm is proposed to optimize the model. Comparing the improved model (IPSO-CNN-BiLSTM) with the traditional PSO-CNN-BiLSTM, CNN-BiLSTM and LSTM models, the prediction results are improved by 13.6%, 93.75% and 94.8%, respectively. Besides that, the two proposed methods are 27% and 35% better than the existing gaussion process regression (GPR) model, which indicates that the proposed improved methods are more flexible for SOH estimation with higher precision. [ABSTRACT FROM AUTHOR]

The thickness of the indium tin oxide (ITO) layer is a critical parameter affecting the performance of solar cells. Traditional measurement methods require sample collection, leading to manufacturing interruptions and potential quality issues. In this paper, we propose a real-time, non-contact approach using deep learning and optical interference phenomena to estimate the thickness of ITO layers in solar cells. We develop a convolutional neural network (CNN) model that processes microscopic images of solar cells and predicts the ITO layer thickness. In addition, mean absolute error (MAE) and mean squared error (MSE) loss functions are combined to train the model. Experimental results demonstrate the effectiveness of our approach in accurately estimating the ITO layer thickness. The integration of computer vision and deep learning techniques provides a valuable tool for non-destructive testing and quality control in the manufacturing of solar cells. The loss of the model after training is reduced to 0.83, and the slope of the test value in the scatter plot with the true value of the ellipsometer is approximately equal to 1, indicating the high reliability of the model. [ABSTRACT FROM AUTHOR]

Waste disposal remains a challenge due to land availability, and environmental and health issues related to the main disposal method, landfilling. Combining computer vision (machine learning) and robotics to sort waste is a cost-effective solution for landfilling activities limitation. The objective of this study was to combine transfer and ensemble learning to process collected waste images and classify landfill waste into nine classes. Pretrained CNN models (Inception–ResNet-v2, EfficientNetb3, and DenseNet201) were used as base models to develop the ensemble network, and three other single CNN models (Models 1, 2, and 3). The single network performances were compared to the ensemble model. The waste dataset, initially grouped in two classes, was obtained from Kaggle, and reorganized into nine classes. Classes with a low number of data were improved by downloading additional images from Google search. The Ensemble Model showed the highest prediction precision (90%) compared to the precision of Models 1, 2, and 3, 86%, 87%, and 88%, respectively. All models had difficulties predicting overlapping classes, such as glass and plastics, and wood and paper/cardboard. The environmental costs for the Ensemble network, and Models 2 and 3, approximately 15 g CO2 equivalent per training, were lower than the 19.23 g CO2 equivalent per training for Model 1. [ABSTRACT FROM AUTHOR]

Dedicated equipment, which is widely used in many different types of vehicles, is the core system that determines the combat capability of special vehicles. Therefore, assuring the normal operation of dedicated equipment is crucial. With the increase in battlefield complexity, the demand for equipment functions is increasing, and the complexity of dedicated equipment is also increasing. To solve the problem of fault diagnosis of dedicated equipment, a fault diagnosis algorithm based on CNN-LSTM was proposed in this paper. CNN and LSTM are used in the model adopted by the algorithm to extract spatial and temporal features from the data. CBAM is used to enhance the model's accuracy in identifying faults for dedicated equipment. Data on dedicated equipment faults were obtained from a hardware-in-loop simulation platform to verify the model. It is demonstrated that the proposed fault diagnosis algorithm has high recognition ability for dedicated equipment by comparing it to other neural network models. [ABSTRACT FROM AUTHOR]

Power quality (PQ) monitoring and detection has emerged as an essential requirement due to the proliferation of sensitive power electronic interfacing devices, electric vehicle charging stations, energy storage devices, and distributed generation energy sources in the recent smart grid and microgrid scenarios. Even though, to date, the traditional approaches play a vital role in providing a solution to the above issue, the limitations, such as the requirement of significant human effort and not being scalable for large-scale power systems, force us to think of alternative approaches. Looking at a better perspective, deep-learning (DL) has gained the main attraction for various researchers due to its inherent capability to classify the data by extracting dominating and prominent features. This manuscript attempts to provide a comprehensive review of PQ detection and classification based on DL approaches to explore its potential, efficiency, and consistency to produce results accurately. In addition, this state-of-the-art review offers an overview of the novel concepts and the step-by-step method for detecting and classifying PQ events. This review has been presented categorically with DL approaches, such as convolutional neural networks (CNNs), autoencoders, and recurrent neural networks (RNNs), to analyze PQ data. This paper also highlights the challenges and limitations of using DL for PQ analysis, and identifies potential areas for future research. This review concludes that DL algorithms have shown promising PQ detection and classification results, and could replace traditional methods. [ABSTRACT FROM AUTHOR]

In this paper, a microscopic oil displacement visualization experiment based on the glass etching model to simulate the tight oil reservoir of underground rocks is carried out. At present, water flooding technology is widely used in the development of oil and gas fields, and the remaining oil content is still very high after water flooding. It is the key to improving oil recovery to identify and study the remaining oil form distribution after water flooding. The experiment result shows there are five types of residual oil after water flooding: columnar residual oil, membranous residual oil, oil droplet residual oil, blind terminal residual oil and cluster residual oil. A convolution neural network is suitable for complex image characteristics with good robustness. In recent years, it has made a breakthrough in a set of small and efficient neural networks with SqueezeNet, Google Inception and the flattened network method put forward. In order to solve the problems of low automation, low efficiency and high error rate in the traditional remaining oil form recognition algorithm after water flooding in tight oil reservoirs, an image recognition algorithm based on the MobileNets convolutional neural network model was proposed in this paper to achieve accurate recognition of the remaining oil form. Based on traditional image processing methods which, respectively, extracted the whole picture of the different types of remaining oil in the image block, it uses the MobileNets network structure to classify different types of image block and realizes the layered depth convolution neural network system. The experiment result shows that the model can accurately identify the remaining oil forms, and the overall recognition accuracy is up to 83.8% after the convergence of the network model, which infinitely identifies the remaining oil forms in the morphological library, proving the strong generalization and robustness of the model. [ABSTRACT FROM AUTHOR]

The rolling bearing is a critical part of rotating machinery and its condition determines the performance of industrial equipment; it is necessary to detect rolling bearing faults as early as possible. The traditional methods of fault diagnosis are not efficient and are time-consuming. With the help of deep learning, the convolution neural network (CNN) plays a huge role in the data-driven methods of bearing fault diagnosis. However, the vibration signal is non-stationary, contains high noise, and is one-dimensional, which is difficult to analyze directly by the CNN model. Considering the multi-domain learning as an advantage of deep learning, this paper proposes a novel rolling bearing fault diagnosis approach using an improved one-dimensional (1D) and two-dimensional (2D) convolution neural network (CNN) of two-domain information learning. The constructed fault diagnosis model combining 1D and 2D CNN extracts the fault features from the two-domain information of bearing fault samples. The padding and dropout technology are utilized to fully extract features from the raw data and reduce over-fitting. To prove the validity of the proposed method, this paper performs two tests with two bearing datasets, the Case Western Reserve University (CWRU) bearing dataset and the Dalian University of Technology (DUT) vibration laboratory dataset. The experimental results show that our proposed method achieves high recognition accuracy of rolling bearing fault states via two-domain learning of monitoring data, and there is no manual experience necessary. Vibration data under strong noise were also used to test the method, and the results show the superiority and robustness of the proposed method. [ABSTRACT FROM AUTHOR]

The installed wind power capacity is growing worldwide. Remote condition monitoring of wind turbines is employed to achieve higher up-times and lower maintenance costs. Machine learning approaches can be used for detecting developing faults in wind turbines in their earlier occurrence. However, training fault detection models may require large amounts of past and present data. These data are often not available or not representative of the current operation behaviour. These data can be acquired with supervisory control and data acquisition systems. Note also that newly commissioned wind farms lack data from previous operation, whilst older installations may also lack representative working condition data as a result of control software updates or component replacements. After such events, a turbine's operation behaviour can change significantly so its data are no longer representative of its current behaviour. Therefore, this paper shows that cross–turbine transfer learning can improve the accuracy of fault detection models in turbines with scarce data from supervisory control and data acquisition systems. In particular, it highlights that combining the knowledge from turbines with scarce data and turbines with plentiful data enables earlier detection of faults than prior art methods. In this way, the reuse and the knowledge transfer across wind turbines allows us to overcome this lack of data, thus enabling accurate fault detection in wind turbines. [ABSTRACT FROM AUTHOR]

The main objective of this paper is to propose two innovative monitoring methods for electrical disturbances in low-voltage networks. The two approaches present a focus on the classification of voltage signals in the frequency domain using machine learning techniques. The first technique proposed here uses the Fourier transform (FT) of the voltage waveform and classifies the corresponding complex coefficients through a multilayered neural network with multivalued neurons (MLMVN). In this case, the classifier structure has three layers and a small number of neurons in the hidden layer. This allows complex-valued inputs to be processed without the need for pre-coding, thus reducing computational cost and keeping training time short. The second technique involves the use of the short-time Fourier transform (STFT) and a convolutional neural network (CNN) with 2D convolutions in each layer for feature extraction and dimensionality reduction. The voltage waveform perturbations taken into consideration are: voltage sag, voltage swell, harmonic pollution, voltage notch, and interruption. The comparison between the two proposed techniques is developed in two phases: initially, the simulated data used during the training phase are considered and, subsequently, various experimental measurements are processed, obtained both through an artificial disturbance generator and through a variable load. The two techniques represent an innovative approach to this problem and guarantee excellent classification results. [ABSTRACT FROM AUTHOR]

Predicting energy demand in adverse scenarios, such as the COVID-19 pandemic, is critical to ensure the supply of electricity and the operation of essential services in metropolitan regions. In this paper, we propose a deep learning model to predict the demand for the next day using the "IEEE DataPort Competition Day-Ahead Electricity Demand Forecasting: Post-COVID Paradigm" database. The best model uses hybrid deep neural network architecture (convolutional network–recurrent network) to extract spatial-temporal features from the input data. A preliminary analysis of the input data was performed, excluding anomalous variables. A sliding window was applied for importing the data into the network input. The input data was normalized, using a higher weight for the demand variable. The proposed model's performance was better than the models that stood out in the competition, with a mean absolute error of 2361.84 kW. The high similarity between the actual demand curve and the predicted demand curve evidences the efficiency of the application of deep networks compared with the classical methods applied by other authors. In the pandemic scenario, the applied technique proved to be the best strategy to predict demand for the next day. [ABSTRACT FROM AUTHOR]

The construction of smart grids has greatly changed the power grid pattern and power supply structure. For the power system, reasonable power planning and demand response is necessary to ensure the stable operation of a society. Accurate load prediction is the basis for realizing demand response for the power system. This paper proposes a Pre-Attention-CNN-GRU model (PreAttCG) which combines a convolutional neural network (CNN) and gate recurrent unit (GRU) and applies the attention mechanism in front of the whole model. The PreAttCG model accepts historical load data and more than nine other factors (including temperature, wind speed, humidity, etc.) as input. The attention layer and CNN layer effectively extract the features and weights of each factor. Load forecasting is then performed by the prediction layer, which consists of a stacked GRU. The model is verified by industrial load data from a German dataset and a Chinese dataset from the real world. The results show that the PreAttCG model has better performance (3~5% improvement in MAPE) than both LSTM with only load input and LSTM with all factors. Additionally, the experiments also show that the attention mechanism can effectively extract the weights of relevant factors affecting the load data. [ABSTRACT FROM AUTHOR]

Accurately obtaining the working status of the sucker rod pumping wells is a challenging problem for oil production. Sensors at the polished rod collect working data to form surface dynamometer cards for fault diagnosis. A prevalent method for recognizing these cards is the convolutional neural network (CNN). However, this approach has two problems: an unbalanced dataset due to varying fault frequencies and similar dynamometer card shapes that complicate recognition. This leads to a low accuracy of fault diagnosis in practice, which is unsatisfactory. Therefore, this paper proposes a hybrid approach of the deep learning method and rule-based method for fault diagnosis of sucker rod pumping wells. Specifically, when the CNN model alone fails to achieve satisfactory accuracy in the working status, historical monitoring data of the relevant wells can be collected, and expert rules can assist CNN to improve diagnostic accuracy. By analyzing time series data of factors such as the maximum and minimum loads, the area of the dynamometer card, and the load difference, a knowledgebase of expert rules can be created. When performing fault diagnosis, both the dynamometer cards and related time series data are used as inputs. The dynamometer cards are used for the CNN model to diagnose, and the related time series data are used for expert rules to diagnose. The diagnostic results and the confidence levels of the two methods are obtained and compared. When the two diagnostic results conflict, the one with higher confidence is preserved. Out of the 2066 wells and 7 fault statuses analyzed in field applications, the hybrid approach demonstrated a 21.25% increase in fault diagnosis accuracy compared with using only the CNN model. Additionally, the overall accuracy rate of the hybrid approach exceeded 95%, indicating its high effectiveness in diagnosing faults in sucker rod pumping wells. [ABSTRACT FROM AUTHOR]

Workload prediction is essential in cloud data centers (CDCs) for establishing scalability and resource elasticity. However, the workload prediction accuracy in the cloud data center could be better due to noise, redundancy, and low performance for workload prediction. This paper designs a hierarchical tree-based deep convolutional neural network (T-CNN) model with sheep flock optimization (SFO) to enhance CDCs' power efficiency and workload prediction. The kernel method is used to preprocess historical information from the CDCs. Additionally, T-CNN model weight parameters are optimized using SFO. The suggested TCNN-SFO technology has successfully reduced excessive power consumption while correctly forecasting the incoming demand. Further, the proposed model is assessed using two benchmark datasets: Saskatchewan HTTP traces and NASA. The developed model is executed in a Java tool. Therefore, associated with existing methods, the developed technique has achieved higher accuracy of 20.75%, 19.06%, 29.09%, 23.8%, and 20.5%, as well as lower energy consumption of 20.84%, 18.03%, 28.64%, 30.72%, and 33.74% when validating the Saskatchewan HTTP traces dataset. It has also achieved higher accuracy of 32.95%, 12.05%, 32.65%, and 26.54%. [ABSTRACT FROM AUTHOR]

Electric vehicles (EVs) are spreading fast as they promise to provide better performance and comfort, but above all, to help face climate change. Despite their success, their cost is still a challenge. Lithium-ion batteries are one of the most expensive EV components, and have become the standard for energy storage in various applications. Precisely estimating the remaining useful life (RUL) of battery packs can encourage their reuse and thus help to reduce the cost of EVs and improve sustainability. A correct RUL estimation can be used to quantify the residual market value of the battery pack. The customer can then decide to sell the battery when it still has a value, i.e., before it exceeds the end of life of the target application, so it can still be reused in a second domain without compromising safety and reliability. This paper proposes and compares two deep learning approaches to estimate the RUL of Li-ion batteries: LSTM and autoencoders vs. CNN and autoencoders. The autoencoders are used to extract useful features, while the subsequent network is then used to estimate the RUL. Compared to what has been proposed so far in the literature, we employ measures to ensure the method's applicability in the actual deployed application. Such measures include (1) avoiding using non-measurable variables as input, (2) employing appropriate datasets with wide variability and different conditions, and (3) predicting the remaining ampere-hours instead of the number of cycles. The results show that the proposed methods can generalize on datasets consisting of numerous batteries with high variance. [ABSTRACT FROM AUTHOR]