Search

This article is a guest editorial for the IET Radar, Sonar & Navigation journal, focusing on selected papers from the RADAR 2022 conference held in Edinburgh, UK. The conference provided an opportunity for radar specialists from 22 countries to explore the latest developments in radar systems. Key topics discussed at the conference included new radar trends, target detection (with a focus on drones), low-frequency radar, and cognitive radar. The special issue contains 17 papers based on extended work presented at the conference, covering topics such as multistatic radar, passive radar, target signatures, and advanced radar processing techniques. The authors hope that this special issue will serve as a valuable resource for further research in the field. [Extracted from the article]

Schematic diagram depicting the synthesis process of the intelligent paper-based biosensor and its colorimetric detection application for biomarkers in urine. (FP: filter paper; CPBA: Carboxyphenylboric acid; HRP: horseradish peroxidase; TMB: 3,3′,5,5′-tetramethylbenzidine; GLU: glusose; UA: uric acid; SAR: sarcosine; GOx: glucose oxidase; UOx: urate oxidase; SOx: urate oxidase.) [Display omitted] • A green, low-cost, portable and visual intelligent paper-based biosensor was created. • This sensor immobilized HRP in horseradish by a borate-modified filter paper. • This sensor can detect many substances simultaneously and improve detection efficiency. • This sensor boasts the advantages of superior sensitivity, stability and selectivity. In the increasing demand for real-time testing, the imperative for a straightforward, rapid, portable, and effective biosensor is evident. In this study, an intelligent paper-based biosensor was developed, employing cost-effective and readily available filter paper as a matrix to prepare boronate affinity paper-based materials. The immobilization of horseradish peroxidase (HRP) from crude horseradish extract onto the material surface was realized. Ultimately, a cold assembly technique was employed to construct this intelligent paper-based biosensor, which combined with a smartphone APP, facilitated the easy, accurate, and simultaneous detection of the content of glucose (GLU), uric acid (UA), and sarcosine (SAR) in urine, significantly enhancing the convenience and practicality of real-time monitoring. Additionally, UV spectroscopy served as an auxiliary method to affirm the reliability of the detection outcomes. For the detection of GLU, UA, and SAR, the biosensor exhibited linear ranges of 2–200, 2–500, and 2–500 µmol L–1, respectively, with detection limits (LODs) of 1 µmol L–1 for all analytes. In practical urine sample analysis, the recovery rates of GLU, UA, and SAR detected by the intelligent paper-based biosensors were within a reasonable range, with relative standard deviations below 3.5 %. This fully demonstrates the high accuracy and reliability of the intelligent paper-based biosensor. The development of this low-cost, portable biosensor provides a new method for the detection of biomarkers related to H 2 O 2. [ABSTRACT FROM AUTHOR]

Polarimetric Synthetic Aperture Radar (PolSAR) data is inherently characterized by speckle noise, which significantly deteriorates certain aspects of the quality of the PolSAR data processing, including the polarimetric decomposition and target interpretation. With the rapid increase in PolSAR resolution, SAR images in complex natural and artificial scenes exhibit non-homogeneous characteristics, which creates an urgent demand for high-resolution PolSAR filters. To address these issues, a new adaptive PolSAR filter based on joint similarity measure criterion (JSMC) is proposed in this paper. Firstly, a scale-adaptive filtering window is established in order to preserve the texture structure based on a multi-directional ratio edge detector. Secondly, the JSMC is proposed in order to accurately select homogeneous pixels; it describes pixel similarity based on both space distance and polarimetric distance. Thirdly, the homogeneous pixels are filtered based on statistical averaging. Finally, the airborne and spaceborne real data experiment results validate the effectiveness of our proposed method. Compared with other filters, the filter proposed in this paper provides a better outcome for PolSAR data in speckle suppression, edge texture, and the preservation of polarimetric properties. [ABSTRACT FROM AUTHOR]

This paper uses MATLAB software to demonstrate the performance of UWBSAR and conducts a comparative study with data obtained from conventional radar. It compares various antennas that support UWB, such as Vivaldi, MIMO, and monopole antennas, analyzed using SIMULINK. The paper discusses the design of UWBSAR to provide a comprehensive analytical picture of the processed images. The focus is on frequency domain analysis in general and the Range Migration Algorithm (RMA) in particular. The data obtained after signal processing is recorded to estimate the crossrange resolution, which is then compared with conventional SAR. The cross-range resolution estimated using UWBSAR is found to be lower than that of conventional radar, proving that UWBSAR is a better alternative for obtaining sharper images in short-range applications. High-quality images are reconstructed using a combination of UWB radar, SAR processing, and proposed algorithms to improve image quality. The investigation includes positive image generation to enhance sharpness and near-field imaging procedures. This paper also describes Ultra-Wideband (UWB) Synthetic Aperture Radar (SAR) and its application in operating at low frequencies to detect obscured targets beneath foliage. While it has obvious military applications, it also has civilian uses, such as in geophysical studies and weather forecasting. Several applications have been identified for both military and civilian environments. [ABSTRACT FROM AUTHOR]

Background: The cloud-penetrating and fog-penetrating capability of Synthetic Aperture Radar (SAR) give it the potential for application in forest fire progress monitoring; however, the low extraction accuracy and significant salt-and-pepper noise in SAR remote sensing mapping of the burned area are problems. Aims: This paper provides a method for accurately extracting the burned area based on fully exploiting the changes in multiple different dimensional feature parameters of dual-polarised SAR images before and after a fire. Methods: This paper describes forest fire progress monitoring using dual-polarisation SAR images combined with multi-scale segmentation and unsupervised classification. We first constructed polarisation feature and texture feature datasets using multi-scene Sentinel-1 images. A multi-scale segmentation algorithm was then used to generate objects to suppress the salt-and-pepper noise, followed by an unsupervised classification method to extract the burned area. Key results: The accuracy of burned area extraction in this paper is 91.67%, an improvement of 33.70% compared to the pixel-based classification results. Conclusions: Compared with the pixel-based method, our method effectively suppresses the salt-and-pepper noise and improves the SAR burned area extraction accuracy. Implications: The fire monitoring method using SAR images provides a reference for extracting the burned area under continuous cloud or smoke cover. This paper describes a method to monitor forest fire progress using dual-polarisation Synthetic Aperture Radar (SAR) images combined with multi-scale segmentation and unsupervised classification. We aimed to take full advantage of the many different dimensions of feature parameter changes caused by forest fires, relying on time-series dual-polarised SAR imagery to achieve burned area extraction and forest fire progress monitoring. [ABSTRACT FROM AUTHOR]

Millimeter wave operates within a wavelength range of 1mm to 10mm and can penetrate through various non-metallic materials, such as the paperboard and plastic films commonly used in cigarette packaging boxes. In comparison to X-ray devices, millimeter wave imagers have the added advantage of not emitting ionizing radiation and having lower electromagnetic radiation output than the standard limit for mobile phone. Given these characteristics, we believe that utilizing millimeter wave imaging technology for detecting missing carton in packaged cigarette boxes could be a viable solution. The paper presents the fundamental imaging theory and showcases some images of cigarette boxes. The results demonstrate that our millimeter wave imager can produce clear images of packaged cigarette boxes with missing carton. We anticipate that this system has significant potential for application in machine vision for tobacco and other similar industries. [ABSTRACT FROM AUTHOR]

The growing adoption of electric propulsion systems in Maritime Autonomous Surface Ships (MASSs) necessitates advancements in shipboard electronics for safe, efficient, and reliable operation. These advancements are crucial for tasks such as real-time sensor data processing, control algorithms for autonomous navigation, and robust decision-making capabilities. This study investigates research trends in MASSs, using bibliographic analysis to identify policy and future research directions in this evolving field. We analyze 3363 MASS-related articles from the Web of Science database, employing co-occurrence word analysis and latent Dirichlet allocation (LDA) topic modeling. The findings reveal a rapidly growing field dominated by image recognition research. Keywords such as "datum", "image", and "detection" suggest a focus on collecting and analyzing marine data, particularly with deep learning for synthetic aperture radar imagery. LDA confirms this, with "image analysis and classification research" as the leading topic. The study also identifies national and organizational leaders in MASS research. However, research on Arctic routes lags behind that on other areas. This work provides valuable insights for policymakers and researchers, promoting a deeper understanding of MASSs and informing future policy and research agendas regarding the integration of electric propulsion systems within the maritime industry. [ABSTRACT FROM AUTHOR]

Atmospheric phase error is the main factor affecting the accuracy of ground-based synthetic aperture radar (GB-SAR). The atmospheric phase screen (APS) may be very complicated, so the atmospheric phase correction (APC) model is very important; in particular, the parameters to be estimated in the model are the key to improving the accuracy of APC. However, the conventional APC method first performs phase unwrapping and then removes the APS based on the least-squares method (LSM), and the general phase unwrapping method is prone to introducing unwrapping error. In particular, the LSM is difficult to apply directly due to the phase wrapping of permanent scatterers (PSs). Therefore, a novel methodology for estimating parameters of the APC model based on the maximum likelihood estimation (MLE) and the Gauss-Newton algorithm is proposed in this paper, which first introduces the MLE method to provide a suitable objective function for the parameter estimation of nonlinear far-end and near-end correction models. Then, based on the Gauss-Newton algorithm, the parameters of the objective function are iteratively estimated with suitable initial values, and the Matthews and Davies algorithm is used to optimize the Gauss-Newton algorithm to improve the accuracy of parameter estimation. Finally, the parameter estimation performance is evaluated based on Monte Carlo simulation experiments. The method proposed in this paper experimentally verifies the feasibility and superiority, which avoids phase unwrapping processing unlike the conventional method. [ABSTRACT FROM AUTHOR]

Understanding and monitoring soil organic carbon (SOC) stocks is crucial for ecosystem carbon cycling, services, and addressing global environmental challenges. This study employs the BERTopic model and bibliometric trend analysis exploration to comprehensively analyze global SOC estimates. BERTopic, a topic modeling technique based on BERT (bidirectional encoder representatives from transformers), integrates recent advances in natural language processing. The research analyzed 1761 papers on SOC and remote sensing (RS), in addition to 490 related papers on machine learning (ML) techniques. BERTopic modeling identified nine research themes for SOC estimation using RS, emphasizing spectral prediction models, carbon cycle dynamics, and agricultural impacts on SOC. In contrast, for the literature on RS and ML it identified five thematic clusters: spatial forestry analysis, hyperspectral soil analysis, agricultural deep learning, the multitemporal imaging of farmland SOC, and RS platforms (Sentinel-2 and synthetic aperture radar, SAR). From 1991 to 2023, research on SOC estimation using RS and ML has evolved from basic mapping to topics like carbon sequestration and modeling with Sentinel-2A and big data. In summary, this study traces the historical growth and thematic evolution of SOC research, identifying synergies between RS and ML and focusing on SOC estimation with advanced ML techniques. These findings are critical to global ecosystem SOC assessments and environmental policy formulation. [ABSTRACT FROM AUTHOR]

Simulated data play an important role in SAR target recognition, particularly under zero-shot learning (ZSL) conditions caused by the lack of training samples. The traditional SAR simulation method is based on manually constructing target 3D models for electromagnetic simulation, which is costly and limited by the target's prior knowledge base. Also, the unavoidable discrepancy between simulated SAR and measured SAR makes the traditional simulation method more limited for target recognition. This paper proposes an innovative SAR simulation method based on a visual language model and generative diffusion model by extracting target semantic information from optical remote sensing images and transforming it into a 3D model for SAR simulation to address the challenge of SAR target recognition under ZSL conditions. Additionally, to reduce the domain shift between the simulated domain and the measured domain, we propose a domain adaptation method based on dynamic weight domain loss and classification loss. The effectiveness of semantic information-based 3D models has been validated on the MSTAR dataset and the feasibility of the proposed framework has been validated on the self-built civilian vehicle dataset. The experimental results demonstrate that the first proposed SAR simulation method based on a visual language model and generative diffusion model can effectively improve target recognition performance under ZSL conditions. [ABSTRACT FROM AUTHOR]

In order to reduce the hardware cost and data acquisition time in near-field scenarios, such as airport security imaging systems, this paper discusses the layout of a multiple-input multiple-output (MIMO) radar array. In view of the existing multi-input multiple-output imaging algorithm, the reconstructed image artifacts and aliasing problems caused by sparse sampling are discussed. In this paper, a multi-station radar array and a corresponding sparse MIMO imaging algorithm based on combined sparse sub-channels are proposed. By studying the wave–number spectrum of backscattered MIMO synthetic aperture radar (SAR) data, the nonlinear relationship between the wave number spectrum and reconstructed image is established. By selecting a complex gain vector, multiple channels are coherently combined effectively, thus eliminating aliasing and artifacts in the reconstructed image. At the same time, the algorithm can be used for the MIMO–SAR configuration of arbitrarily distributed transmitting and receiving arrays. A new multi-station millimeter wave imaging system is designed by using a frequency-modulated continuous wave (FMCW) chip and sliding rail platform as a planar SAR. The combination of the hardware system provides reconfiguration, convenience and economy for the combination of millimeter wave imaging systems in multiple scenes. [ABSTRACT FROM AUTHOR]

In recent years, with the miniaturization of high-precision position and orientation systems (POS), precise motion errors during SAR data collection can be calculated based on high-precision POS. However, compensating for these errors remains a significant challenge for multi-rotor UAV-borne SAR systems. Compared with large aircrafts, multi-rotor UAVs are lighter, slower, have more complex flight trajectories, and have larger squint angles, which result in significant differences in motion errors between building targets and ground targets. If the motion compensation is based on ground elevation, the motion error of the ground target will be fully compensated, but the building target will still have a large residual error; as a result, although the ground targets can be well-focused, the building targets may be severely defocused. Therefore, it is necessary to further compensate for the residual motion error of building targets based on the actual elevation on the SAR image. However, uncompensated errors will affect the time–frequency relationship; furthermore, the ω-k algorithm will further change these errors, resulting in errors in SAR images becoming even more complex and difficult to compensate for. To solve this problem, this paper proposes a novel improved precise topography and aperture-dependent (PTA) method that can precisely compensate for motion errors in the UAV-borne SAR system. After motion compensation and imaging processing based on ground elevation, a secondary focus is applied to defocused buildings. The improved PTA fully considers the coupling of the residual error with the time–frequency relationship and ω-k algorithm, and the precise errors in the two-dimensional frequency domain are determined through numerical calculations without any approximations. Simulation and actual data processing verify the effectiveness of the method, and the experimental results show that the proposed method in this paper is better than the traditional method. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) and tomographic SAR measurement techniques are commonly used for the three-dimensional (3D) reconstruction of complex areas, while the effectiveness of these methods relies on the interferometric coherence among SAR images with minimal angular disparities. Radargrammetry exploits stereo image matching to determine the spatial coordinates of corresponding points in two SAR images and acquire their 3D properties. The performance of the image matching process directly impacts the quality of the resulting digital surface model (DSM). However, the presence of speckle noise, along with dissimilar geometric and radiometric distortions, poses considerable challenges in achieving accurate stereo SAR image matching. To address these aforementioned challenges, this paper proposes a radargrammetric method based on the composite registration of multi-aspect SAR images. The proposed method combines coarse registration using scale invariant feature transform (SIFT) with precise registration using normalized cross-correlation (NCC) to achieve accurate registration between multi-aspect SAR images with large disparities. Furthermore, the multi-aspect 3D point clouds are merged using the proposed radargrammetric 3D imaging method, resulting in the 3D imaging of target scenes based on multi-aspect SAR images. For validation purposes, this paper presents a comprehensive 3D reconstruction of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) using Ka-band airborne SAR images. It does not necessitate prior knowledge of the target and is applicable to the detailed 3D imaging of large-scale areas with complex structures. In comparison to other SAR 3D imaging techniques, it reduces the requirements for orbit control and radar system parameters. To sum up, the proposed 3D imaging method with composite registration guarantees imaging efficiency, while enhancing the imaging accuracy of crucial areas with limited data. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) is an active microwave sensor that has attracted widespread attention due to its ability to observe the ground around the clock. Research on multi-scale and multi-category target detection methods holds great significance in the fields of maritime resource management and wartime reconnaissance. However, complex scenes often influence SAR object detection, and the diversity of target scales also brings challenges to research. This paper proposes a multi-category SAR image object detection model, CCDS-YOLO, based on YOLOv5s, to address these issues. Embedding the Convolutional Block Attention Module (CBAM) in the feature extraction part of the backbone network enables the model's ability to extract and fuse spatial information and channel information. The 1 × 1 convolution in the feature pyramid network and the first layer convolution of the detection head are replaced with the expanded convolution, Coordinate Conventional (CoordConv), forming a CRD-FPN module. This module more accurately perceives the spatial details of the feature map, enhancing the model's ability to handle regression tasks compared to traditional convolution. In the detector segment, a decoupled head is utilized for feature extraction, offering optimal and effective feature information for the classification and regression branches separately. The traditional Non-Maximum Suppression (NMS) is substituted with the Soft Non-Maximum Suppression (Soft-NMS), successfully reducing the model's duplicate detection rate for compact objects. Based on the experimental findings, the approach presented in this paper demonstrates excellent results in multi-category target recognition for SAR images. Empirical comparisons are conducted on the filtered MSAR dataset. Compared with YOLOv5s, the performance of CCDS-YOLO has been significantly improved. The mAP@0.5 value increases by 3.3% to 92.3%, the precision increases by 3.4%, and the mAP@0.5:0.95 increases by 6.7%. Furthermore, in comparison with other mainstream detection models, CCDS-YOLO stands out in overall performance and anti-interference ability. [ABSTRACT FROM AUTHOR]

For visible and Synthetic Aperture Radar (SAR) image fusion, this paper proposes a visible and SAR image fusion algorithm based on a Transformer and a Convolutional Neural Network (CNN). Firstly, in this paper, the Restormer Block is used to extract cross-modal shallow features. Then, we introduce an improved Transformer–CNN Feature Extractor (TCFE) with a two-branch residual structure. This includes a Transformer branch that introduces the Lite Transformer (LT) and DropKey for extracting global features and a CNN branch that introduces the Convolutional Block Attention Module (CBAM) for extracting local features. Finally, the fused image is output based on global features extracted by the Transformer branch and local features extracted by the CNN branch. The experiments show that the algorithm proposed in this paper can effectively achieve the extraction and fusion of global and local features of visible and SAR images, so that high-quality visible and SAR fusion images can be obtained. [ABSTRACT FROM AUTHOR]

This paper follows a detection-theoretic approach for using synthetic-aperture measurements, made at multiple moving passive receivers, in order to form an image showing the locations of stationary sources that are radiating unknown electromagnetic or acoustic waves. The paper starts with a physics-based model for the propagating fields, and, following the general approach of McWhorter et al (2023 arXiv:2302.06816, IEEE Open J. Signal Process. 4 437–51), derives a detection statistic that is used for the image formation. This detection statistic is a quadratic function of the data. Each point in the scene is tested as a possible hypothesized location for a source, and the detection statistic is plotted as a function of location. Because this image formation process is nonlinear, the standard linear methods for determining resolution cannot be applied. This paper shows how to analyze the detection image by first writing the noiseless image as a coherent sum of shifted complex ambiguity functions of the source waveform. The paper then develops a technique for calculating image resolution; resolution is found to depend on the sensor-source geometry and also on the properties (bandwidth and temporal duration) of the source waveform. Optimal filtering of the image is given, but a simple example suggests that optimal filtering may have little effect. Analysis is also given for the case in which multiple sources are present. [ABSTRACT FROM AUTHOR]

This work proposes a new compact triple-band triangular patch antenna for RF energy harvesting applications in IoT devices. It is realized on Teflon glass substrate with a thickness of 0.67 mm and a relative permittivity of 2.1. Four versions of this antenna have been designed and realized with inclinations of 0°, 30°, 60° and 90° to study the impact of the tilting on their characteristics (S11 parameter, radiation pattern, gain) and to explore the possibilities of their implementation in the architectures of electronic equipment according to the available space. The antenna is also realized on waterproof paper with a thickness of 0.1 mm and a relative permittivity of 1.4 for biomedical domain. All the antennas (vertical antenna, tilted antennas and antenna realized on waterproof paper) have a size of 39 × 9 mm2 and cover the 2.45 GHz and 5.2 GHz Wi-Fi bands and the 8.2 GHz band. A good agreement is obtained between measured and simulated results. Radiation patterns show that all the antennas are omnidirectional for 2.45 GHz and pseudo-omnidirectional for 5.2 GHz and 8.2 GHz with maximum measured gains of 2.6 dBi, 4.55 dBi and 6 dBi, respectively. The maximum measured radiation efficiencies for the three antenna configurations are, respectively, of 75%, 70% and 72%. The Specific Absorption Rate (SAR) for the antenna bound on the human body is of 1.1 W/kg, 0.71 W/kg and 0.45 W/kg, respectively, for the three frequencies 2.45 GHz, 5.2 GHz and 8.2 GHz. All these antennas are then applied to realize RF energy harvesting systems. These systems are designed, realized and tested for the frequency 2.45 GHz, −20 dBm input power and 2 kΩ resistance load. The maximum measured output DC power is of 7.68 µW with a maximum RF-to-DC conversion efficiency of 77%. [ABSTRACT FROM AUTHOR]

Traditional near-field synthetic aperture radar (SAR) imaging algorithms reveal target features by exploiting signal amplitude and phase information. However, electromagnetic wave propagation is constrained by short distance. Therefore, the spherical wave approximation needs to be considered. In addition, it is also limited by equipment ambient noise, azimuth-distance coupling, wave scattering, and transmission power. Both the amplitude and phase of the signal suffer from the interference of multiple clutter, so they cannot be effectively utilized. To address these issues, this paper introduces a covering penetration detection system based on an improved Range Migration Algorithm (IMRMA) imaging method. Firstly, the proposed method minimizes interferences from the front end of the system using an optimized window to balance denoising and information preservation. Next, interval non-uniform interpolation, instead of Stolt interpolation decoupling, is employed to reduce the computational overhead significantly. To minimize the effects due to wave scattering and propagation loss, distance information is enhanced using amplitude and phase compensation. This reduces scattering effects and enhances image quality. An experimental system is constructed based on a vector network analyzer (VNA) to image the target. The proposed method takes about half the time of traditional RMA. The PSNR in the chunky bowl experiment is higher than 14 dB, which is higher than all the compared methods in the paper. The test results show that the designed system and the reported method can effectively achieve high-resolution images by strengthening the target intensity and suppressing the environmental artifacts. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) inter-pulse parameter agility technology involves dynamically adjusting parameters such as the pulse width, chirp rate, carrier frequency, and pulse repetition interval within a certain range; this effectively increases the complexity and uncertainty of radar waveforms, thereby countering active deceptive interference signals from multiple dimensions. With the development of active deceptive interference technology, single-parameter agility can no longer meet the requirements, making multi-parameter joint agility one of the main research directions. However, inter-pulse carrier frequency agility can cause azimuth Doppler chirp rate variation, making azimuth compression difficult and compensation computationally intensive, thus hindering imaging. Additionally, pulse repetition interval (PRI) agility leads to non-uniform azimuth sampling, severely deteriorating image quality. To address these issues, this paper proposes a multi-parameter agile SAR imaging scheme based on traditional frequency domain imaging algorithms. This scheme can handle joint agility of pulse width, chirp rate polarity, carrier frequency, and PRI, with relatively low computational complexity, making it feasible for engineering implementation. By inverting SAR images, the echoes with multi-parameter joint agility are obtained, and active deceptive interference signals are added for processing. The interference-suppressed imaging results verify the effectiveness of the proposed method. Furthermore, simulation results of point targets with multiple parameters under the proposed processing algorithm show that the peak sidelobe ratio (PSLR) and integrated sidelobe ratio (ISLR) are improved by 12 dB and 10 dB, respectively, compared to the traditional fixed waveform scheme. [ABSTRACT FROM AUTHOR]

The differences in sensor imaging mechanisms, observation angles, and scattering characteristics of terrestrial objects significantly limit the registration performance of synthetic aperture radar (SAR) and optical heterologous images. Traditional methods particularly struggle in weak feature regions, such as harbors and islands with substantial water coverage, as well as in desolate areas like deserts. This paper introduces a robust heterologous image registration technique based on region-adaptive keypoint selection that integrates image texture features, targeting two pivotal aspects: feature point extraction and matching point screening. Initially, a dual threshold criterion based on block region information entropy and variance products effectively identifies weak feature regions. Subsequently, it constructs feature descriptors to generate similarity maps, combining histogram parameter skewness with non-maximum suppression (NMS) to enhance matching point accuracy. Extensive experiments have been conducted on conventional SAR-optical datasets and typical SAR-optical images with different weak feature regions to assess the method's performance. The findings indicate that this method successfully removes outliers in weak feature regions and completes the registration task of SAR and optical images with weak feature regions. [ABSTRACT FROM AUTHOR]

This document is an editorial on the special issue of "3D Reconstruction and Mobile Mapping in Urban Environments Using Remote Sensing." The editorial highlights the importance of 3D reconstruction and mobile mapping in various applications such as autonomous driving, smart logistics, pedestrian navigation, and virtual reality. It discusses the emergence of remote sensing-based techniques and cutting-edge technologies like SfM, SLAM, and deep learning that have enhanced the field. The special issue includes 15 high-quality papers covering topics such as image feature matching, LiDAR/image-fused SLAM, NeRF-based scene rendering, and other applications like InSAR point cloud registration and 3D GPR for underground imaging. The editorial concludes by expressing gratitude to the authors and reviewers for their contributions and highlighting the value of this special issue for further research. [Extracted from the article]

The SAR system possesses the ability to carry out all-day and all-weather imaging, which is highly valuable in the application of aircraft identification. However, aircraft identification from SAR images still faces great challenges due to speckle noise interference, multiscale problems, and complex background interference. To solve these problems, an efficient bidirectional path multiscale fusion and attention network (EBMA-Net) is proposed in this paper. It employs bidirectional connectivity to fuse the features of aircraft with different scales to perform the accurate detection of aircraft even when the background is highly complex. In the presented EBMA-Net, a module called efficient multiscale channel attention fusion (EMCA) and three parallel squeeze efficient channel attention (SECA) modules are proposed. In the EMCA module, the bidirectional paths are created by stacking upper and lower fusion modules, which effectively integrate shallow detailed features and deep semantic information. So, the detection performance of aircraft at different scales is improved. In the SECA module, the dependency relationship between feature channels is explicitly modeled, which can automatically learn the importance of different channels, prioritize key features, so as to improve the precision and robustness of aircraft identification. In the experiment, the public dataset of aircraft identification (i.e., SAR-AIRcraft-1.0, which is generated from the GF-3 satellite) from high-resolution SAR systems is used, and several other excellent target-detection networks are used for performance comparison, namely, YOLOv5s, YOLOv7, MGCAN, and EBPA2N. According to the results, the average aircraft detection accuracy of EBMA-Net is 91.31%, which is 4.5% higher than YOLOv7; and the false alarm rate is decreased by 5%. Its accuracy in the identification of aircraft can reach 95.6%, which is about 3.7% higher than YOLOv7. Therefore, the EBMA-Net obviously outperforms the other networks for aircraft detection and identification. The proposed EBMA-Net, which can capture the detailed information and better restrain the background interference, could also be used to perform the detection and identification of dense targets with different scales and background from SAR images. [ABSTRACT FROM AUTHOR]

This paper analyzes the advantages and the drawbacks of using the Synthetic Aperture Radar (SAR) azimuth multichannel technique known as Multi-Aperture Processing Scheme (MAPS), in a set of relevant application cases that are far from the canonical ones. In the scientific literature on this topic, equally distributed azimuth channels with the quasi-monostatic deployment are assumed. With this research, we aim at extending the models from the current literature to (i) a generic bistatic acquisition geometry, (ii) a set of cases where the number of receiving tiles is not the same for each channel, or (iii) the tiles are shared between adjacent channels thus creating an overlapping configuration. The paper introduces the mathematical models for the listed non-conventional MAPS cases. Dealing with the bistatic MAPS, we first solve the problem by interpreting multichannel acquisition as a bank of Linear Time Invariant (LTI) filters. Then, a more physical approach, based on discrimination of the direction of arrivals (DoAs) is pursued. The effectiveness of the two methods and the advantages of the second approach on the first are proved by using a simplified 1D end-to-end simulation. Even limiting to the monostatic configuration, the azimuth antenna tiles have always been supposed equally partitioned among the RX channels. Overcoming this limit has two advantages: (i) more MAPS possible solutions in case few azimuth tiles are available, as in the ROSE-L mission; (ii) the number of channels can be designed independently of the number of tiles, also allowing asymmetric solutions, useful for a phase array antenna with an odd number of tiles such as in the SAOCOM-1 mission. Conversely, sharing one or more receiving tiles in different receiving channels makes the input noise partially correlated. The drawback is an increase in the noise level. A trade-off is determined for the different solutions obtained using simulations with real mission parameters. The theoretical performance and the end-to-end simulations are compared. [ABSTRACT FROM AUTHOR]

The MET Norway Ice Service (NIS) celebrated its fiftieth year as a formal operational sea ice information provider in 2020. Prior to the 1970's, support to navigation had started off with ad-hoc observations from coastal stations on Svalbard in the 1930's, before developing as a research programme in the 1960's. Activity in the region has steadily increased, and now the NIS also supports a large number of research, tourist, and resource exploration vessels, in addition to the ice chart archive being a resource for climate change research. The Ice Service has always been at the forefront in the use of satellite Earth Observation technologies, beginning with the routine use of optical thermal infrared imagery from NASA TIROS and becoming a large user of Canadian RADARSAT-2 Synthetic Aperture Radar (SAR), and then European Copernicus Sentinel-1, in the 2000's and 2010's. Initially ice charts were a weekly compilation of ice information using cloud-free satellite coverage, aerial reconnaissance, and in situ observations, drawn on paper at the offices of the Norwegian Meteorological Institute (MET Norway) in Oslo. From 1997 production moved to the Tromsø office using computer-based Geographical Information System (GIS) software and the NIS developed the ice charting system Bifrost. This allowed the frequency of production to be increased to every weekday, with a greater focus on detailed sea ice concentrations along the ice edge and coastal zones in Eastern Greenland and in the Svalbard fjords. From 2010, the NIS has also provided a weekly austral summer ice chart for the Weddell Sea and Antarctic Peninsula. To further develop its capabilities, NIS engages in a number of national and international research projects and led the EU Horizon 2020 project, Key Environmental monitoring for Polar Latitudes and European Readiness (KEPLER). This paper summarises the overall mandate and history of the NIS, and its current activities including the current state of routine production of operational ice charts at the NIS for maritime safety in both the Arctic and Antarctic, and future development plans. [ABSTRACT FROM AUTHOR]

When performing high-resolution imaging with ground-based synthetic aperture radar (GB-SAR) systems, the data collected and processed are vast and complex, imposing higher demands on the real-time performance and processing efficiency of the imaging system. Yet a very limited number of studies have been conducted on the real-time processing method of GB-SAR monitoring data. This paper proposes a real-time imaging scheme based on parallel processing models, optimizing each step of the traditional  ω K imaging algorithm in parallel. Several parallel optimization schemes are proposed for the computationally intensive and complex interpolation part, including dynamic parallelism, the  G r o u p - N s t r e a m  processing model, and the  F t h r e a d - G r o u p - N s t r e a m  processing model. The  F t h r e a d - G r o u p - N s t r e a m  processing model utilizes  F t h r e a d ,  G r o u p , and  N s t r e a m  for the finer-grained processing of monitoring data, reducing the impact of the nested depth on the algorithm's performance in dynamic parallelism and alleviating the issue of serial execution within the  G r o u p - N s t r e a m  processing model. This scheme has been successfully applied in a synthetic aperture radar imaging system, achieving excellent imaging results and accuracy. The speedup ratio can reach 52.14, and the relative errors in amplitude and phase are close to 0, validating the effectiveness and practicality of the proposed schemes. This paper addresses the lack of research on the real-time processing of GB-SAR monitoring data, providing a reliable monitoring method for GB-SAR deformation monitoring. [ABSTRACT FROM AUTHOR]

Holographic synthetic aperture radar (HoloSAR) introduces a cutting-edge three-dimensional (3-D) imaging mode to the field of synthetic aperture radar (SAR), enriching the scattering information of targets by observing them across multiple spatial dimensions. However, independent phase errors among baselines, such as those caused by platform jitter and measurement inaccuracies, pose significant challenges to imaging quality. The phase gradient autofocus (PGA) method effectively estimates phase errors, but struggles to accurately estimate the linear component, causing vertical shift in HoloSAR subaperture imaging result. Therefore, this paper proposes a PGA-based phase error compensation method for HoloSAR to address the vertical shift issue caused by linear phase errors. This method can achieve phase error correction in both the echo domain and image domain with enhanced efficiency. Experimental results of simulated targets and real data from the GOTCHA system demonstrate the effectiveness and practicality of the proposed method. [ABSTRACT FROM AUTHOR]

Reservoir impoundment significantly impacts the hydrogeological conditions of reservoir bank slopes, and bank slope deformation or destruction occurs frequently under cyclic impoundment conditions. Ground deformation prediction is crucial to the early warning system for slow-moving landslides. Deep learning methods have developed rapidly in recent years, but only a few studies are on combining deep learning and landslide warning. This paper proposes a slow-moving landslide displacement prediction method based on the Informer deep learning model. Firstly, the Sentinel-1 (S1) data are processed to obtain the cumulative displacement time-series image of the bank slope by the Small-BAseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) method. Then, combining data on rainfall, humidity, and horizontal and vertical distances of pixel points from the water table line, this study created a dataset with landslide displacement as the target feature. After that, this paper improves the Informer model to make it applicable to our dataset. This study chose the Dawanzi landslide in the Baihetan reservoir area, China, for validation. After training with 50-time series deformation data points, the model can predict the displacement results of 12-time series deformation data points using 12-time series multi-feature data, and compared with the monitoring values, its Mean Square Error (MSE) was 11.614. The results show that the multivariate dataset is better than the deformation univariate data in predicting the displacement in the large deformation zone of bank slopes, and our model has better complexity and prediction performance than other deep learning models. The prediction results show that among zones I–IV, where the Dawanzi Tunnel is located, significant deformation with the maximum deformation rate detected exceeding –100mm/year occurs in Zones I and III. In these two zones, the initiation of deformation relates to the drop in water level after water storage, with the deformation rate of Zone III exhibiting a stronger correlation with the change in water level. It is expected that deformation in Zone III will either remain slow or stop, while deformation in Zone I will continue at the same or a decreased rate. Our proposed method for slow-moving landslide displacement forecasting offers fast, intuitive, and economically feasible advantages. It can provide a feasible research idea for future deep learning and landslide warning research. [ABSTRACT FROM AUTHOR]

Generative adversarial networks (or GANs) are a specific deep learning architecture often used for different usages, such as data generation or image-to-image translation. In recent years, this structure has gained increased popularity and has been used in different fields. One area of expertise currently in vogue is the use of GANs to produce synthetic aperture radar (SAR) data, and especially expand training datasets for SAR automatic target recognition (ATR). In effect, the complex SAR image formation makes these kind of data rich in information, leading to the use of deep networks in deep learning-based methods. Yet, deep networks also require sufficient data for training. However, contrary to optical images, we generally do not have a substantial number of available SAR images because of their acquisition and labelling cost; GANs are then an interesting tool. Concurrently, how to improve explainability for SAR ATR deep neural networks and how to make their reasoning more transparent have been increasingly explored as model opacity deteriorates trust of users. This paper aims at reviewing how GANs are used with SAR images, but also giving perspectives on how GANs could be used to improve interpretability and explainability of SAR classifiers. [ABSTRACT FROM AUTHOR]

Near-range radar imaging (NRRI) has evolved into a vital technology with diverse applications spanning fields such as remote sensing, surveillance, medical imaging and non-destructive testing. The Pseudopolar Format Matrix (PFM) has emerged as a promising technique for representing radar data in a compact and efficient manner. In this paper, we present a comprehensive PFM description of near-range radar imaging. Furthermore, this paper also explores the integration of the Fractional Fourier Transform (FrFT) with PFM for enhanced radar signal analysis. The FrFT—a powerful mathematical tool for signal processing—offers unique capabilities in analysing signals with time-frequency localization properties. By combining FrFT with PFM, we have achieved significant advancements in radar imaging, particularly in dealing with complex clutter environments and improving target detection accuracy. Meanwhile, this paper highlights the imaging matrix form of FrFT under the PFM, emphasizing the potential for addressing challenges encountered in near-range radar imaging. Finally, numerical simulation and real-world scenario measurement imaging results verify optimized accuracy and computational efficiency with the fusion of PFM and FrFT techniques, paving the way for further innovations in near-range radar imaging applications. [ABSTRACT FROM AUTHOR]

Distributed interrupted sampling repeater jamming (D-ISRJ) is the application of interrupted sampling repeater jamming technology within the framework of distributed jamming systems. It can generate coherent false targets after passing through the target radar's matched filter, but these false targets exhibit strong regularity in range and amplitude. Addressing this issue, a distributed interrupted sampling frequency-shifted repeater jamming method based on the group teaching optimization algorithm (GTOA) is proposed in this paper. By introducing frequency-shifted modulation during the retransmission of the jamming signal, the frequency shift amount of the jamming unit in each round of repeater jamming is used as an optimization variable to construct an optimization model for distributed interrupted sampling frequency-shifted repeater jamming. The parameters are then solved by using GTOA. Simulations are conducted to analyze the jamming effects under different distributed jamming modes, and the proposed optimization algorithm is compared to common swarm intelligence algorithms in the same optimization model. The method proposed in this paper can be used in the field of precision electronic warfare to improve the jamming effect of synthetic aperture radar. Experimental results show that under the given simulation conditions, the jamming signal generated by the proposed method can achieve better jamming effects. [ABSTRACT FROM AUTHOR]

High-resolution and high-squint spaceborne spotlight synthetic aperture radar (SAR) has significant potential for extensive application in remote sensing, but its swath width effectiveness is constrained by a critical factor: severe range cell migration (RCM). To address this, pulse repetition interval (PRI) variation offers a practical scheme for raw data reception. However, the current designs for continuously varying PRI (CV-PRI) exhibit high complexity in engineering. In response to the issue, this paper proposes a novel strategy of stepwise varying PRI (SV-PRI), which demonstrates higher reconstruction accuracy compared with CV-PRI. Furthermore, confronting the azimuth non-uniform sampling characteristics induced by the PRI variation, this paper introduces a complete uniform reconstruction processing based on the azimuth partitioning methodology, which effectively alleviates the inherent contradiction between resolution and swath width. The processing flow, utilizing the temporal point remapping (TPR) concept, ensures the uniformity and coherence of dataset partitioning and reassembly in the context of the interpolation on non-uniform grids. Finally, according to the simulation results, the point target data, processed through the processing flow proposed in this study, have demonstrated effective focusing results. [ABSTRACT FROM AUTHOR]

This document explores the significance of remote sensing in monitoring maritime activities and identifying vessels. It emphasizes the need for surveillance to ensure safety, security, and emergency management, given the increasing number of vessels worldwide. The document highlights the use of technologies like the Automatic Identification System (AIS) and remote sensing in situations where collaborative systems are not reliable. It also discusses the integration of data from different sensors and the application of data science techniques for a comprehensive assessment of maritime traffic. The document concludes by summarizing research papers on ship detection, tracking, and classification using various sensors and data processing techniques. [Extracted from the article]

Synthetic Aperture Radar (SAR) can image the ground with a wide area and high resolution at all times and in all weather and has become an important means of remote sensing. Differential interferometry SAR technology can obtain high-precision surface deformation information by processing more than two SAR images before and after deformation. In recent years, it has attracted widespread attention and research. However, due to the increasing number of ground electronic devices, ground radio frequency interference (RFI) has become one of the main problems in differential interferometry SAR processing, seriously affecting the performance of differential interferometry SAR imaging and differential interferometry surface deformation monitoring applications. In this paper, a clutter cancellation interference enhancement detection algorithm is proposed. By clutter suppression in the primary and secondary images, the interference-to-signal ratio is increased, which effectively improves the interference detection capabilities. The effectiveness of the algorithm in this paper is verified by the on-orbit measured data of the Lutan-1 satellites. [ABSTRACT FROM AUTHOR]

Complex geometric distortions and nonlinear radiation differences between optical and synthetic aperture radar (SAR) images present challenges for the matching of sufficient and evenly distributed corresponding points. To address this problem, this paper proposes a deep convolutional network based on an attention mechanism for matching optical and SAR images. In order to obtain robust feature points, we employ phase consistency instead of image intensity and gradient information for feature detection. A deep convolutional network (DCN) is designed to extract high-level semantic features between optical and SAR images, providing robustness to geometric distortion and nonlinear radiation changes. Notably, incorporating multiple inverted residual structures in the DCN facilitates efficient extraction of local and global features, promoting feature reuse, and reducing the loss of key features. Furthermore, a dense feature fusion module based on coordinate attention is designed, focusing on the spatial positional information of effective features, integrating key features into deep descriptors to enhance the robustness of deep descriptors to nonlinear radiometric differences. A coarse-to-fine strategy is then employed to enhance accuracy by eliminating mismatches. Experimental results demonstrate that the proposed network performs better than the manually designed descriptors-based methods and the stateof- the-art deep learning networks in both matching effectiveness and accuracy. Specifically, the number of matches achieved is approximately 2 times greater than that of other methods, with a 10% improvement in F-measure. [ABSTRACT FROM AUTHOR]

Rapid mapping demands efficient methods for a fast extraction of information from satellite data while minimizing data requirements. This paper explores the potential of deep learning for the generation of high-resolution urban elevation data from Synthetic Aperture Radar (SAR) imagery. In order to mitigate occlusion effects caused by the side-looking nature of SAR remote sensing, two SAR images from opposing aspects are leveraged and processed in an end-to-end deep neural network. The presented approach is the first of its kind to implicitly handle the transition from the SAR-specific slant range geometry to a ground-based mapping geometry within the model architecture. Comparative experiments demonstrate the superiority of the dual-aspect fusion over single-image methods in terms of reconstruction quality and geolocation accuracy. Notably, the model exhibits robust performance across diverse acquisition modes and geometries, showcasing its generalizability and suitability for height mapping applications. The study's findings underscore the potential of deep learning-driven SAR techniques in generating high-quality urban surface models efficiently and economically. [ABSTRACT FROM AUTHOR]

Introduction: Optical and SAR image matching is one of the fields within multisensor imaging and fusion. It is crucial for various applications such as disaster response, environmental monitoring, and urban planning, as it enables comprehensive and accurate analysis by combining the visual information of optical images with the penetrating capability of SAR images. However, the differences in imaging mechanisms between optical and SAR images result in significant nonlinear radiation distortion. Especially for SAR images, which are affected by speckle noises, resulting in low resolution and blurry edge structures, making optical and SAR image matching difficult and challenging. The key to successful matching lies in reducing modal differences and extracting similarity information from the images. Method: In light of this, we propose a structure similarity virtual map generation network (SVGNet) to address the task of optical and SAR image matching. The core innovation of this paper is that we take inspiration from the concept of image generation, to handle the predicament of image matching between different modalities. Firstly, we introduce the Attention U-Net as a generator to decouple and characterize optical images. And then, SAR images are consistently converted into optical images with similar textures and structures. At the same time, using the structural similarity (SSIM) to constrain structural spatial information to improve the quality of generated images. Secondly, a conditional generative adversarial network is employed to further guide the image generation process. By combining synthesized SAR images and their corresponding optical images in a dual channel, we can enhance prior information. This combined data is then fed into the discriminator to determine whether the images are true or false, guiding the generator to optimize feature learning. Finally, we employ least squares loss (LSGAN) to stabilize the training of the generative adversarial network. Results and Discussion: Experiments have demonstrated that the SVGNet proposed in this paper is capable of effectively reducing modal differences, and it increases the matching success rate. Compared to direct image matching, using image generation ideas results in a matching accuracy improvement of more than twice. [ABSTRACT FROM AUTHOR]

When Synthetic Aperture Radar (SAR) observes complex structural targets such as oil tanks, it is easily interfered with by multipath signals, resulting in a large number of multipath ghost images in the SAR image, which seriously affect the image clarity. To address this problem, this paper proposes a multi-aspect multipath suppression method. This method observes complex structural targets from different azimuth angles to obtain a multi-aspect image sequence and then uses the difference in sequence features between the target image and the multipath ghost image with respect to aspect angle to separate them. This paper takes a floating-roof oil tank as an example to analyze the propagation path and the ghost image characteristics of multipath signals under different observation aspects. We conclude that the scattering center of the multipath ghost image changes with the radar observation aspect, whereas the scattering center of the target image does not. This paper uses the Robust Principal Component Analysis (RPCA) method to decompose the image sequence matrix into two parts: a sparse matrix and a low-rank matrix. The low-rank matrix represents the aspect-stable principal component in the image sequence; that is, the real scattering center. The sparse matrix represents the part of the image sequence that deviates from the principal component; that is, the signal that varies with aspect, mainly including multipath signals, sidelobes, anisotropic signals, etc. By reconstructing the low-rank matrix and the sparse matrix, respectively, we can obtain the image after multipath signal suppression and also the multipath ghost image. Both the target and the multipath signal provide useful information. The image after multipath signal suppression is useful for obtaining the structural information of the target, and the multipath ghost image is useful for analyzing the multipath phenomenon of the complex structure target. This paper conducts experimental verification using real airborne SAR data of an external floating roof oil tank and compares three methods: RPCA, PCA, and sub-aperture fusion method. The experiment shows that the RPCA method can better separate the target image and the multipath ghost image. [ABSTRACT FROM AUTHOR]

Circular synthetic aperture radar (CSAR) possesses the capability of multi-angle observation, breaking through the geometric observation constraints of traditional strip SAR and holding the potential for three-dimensional imaging. Its sub-wavelength level of planar resolution, resulting from a long synthetic aperture, makes CSAR highly valuable in the field of high-precision mapping. However, the motion geometry of CSAR is more intricate compared to traditional strip SAR, demanding high precision from navigation systems. The accumulation of errors over the long synthetic aperture time cannot be overlooked. CSAR exhibits significant coupling between the range and azimuth directions, making traditional motion compensation methods based on linear SAR unsuitable for direct application in CSAR. The dynamic nature of flight, with its continuous changes in attitude, introduces a significant deformation error between the non-rigidly connected Inertial Measurement Unit (IMU) and the Global Positioning System (GPS). This deformation error makes it difficult to accurately obtain radar position information, resulting in imaging defocus. The research in this article uncovers a correlation between the deformation error and radial acceleration. Leveraging this insight, we propose utilizing radial acceleration to estimate residual motion errors. This paper delves into the analysis of Position and Orientation System (POS) errors, presenting a novel high-resolution CSAR motion compensation method based on airborne platform acceleration information. Once the system deformation parameters are calibrated using point targets, the deformation error can be directly calculated and compensated based on the acceleration information, ultimately resulting in the generation of a high-resolution image. In this paper, the effectiveness of the method is verified with airborne flight test data. This method can compensate for the deformation error and effectively improve the peak sidelobe ratio and integral sidelobe ratio of the target, thus improving image quality. The introduction of acceleration information provides new means and methods for high-resolution CSAR imaging. [ABSTRACT FROM AUTHOR]

This paper investigates a real-time process generator of wideband signals, which calculates waveforms in a field-programmable gate array (FPGA) using the high-level synthesis (HLS) method. To obtain high-resolution and wide-swath images, the generator must produce multiple modes of large time-bandwidth product (TBP) linear frequency modulation (LFM) signals. However, the conventional storage method is unrealistic as it requires huge storage resources to save pre-computed waveforms. Therefore, this paper proposes a novel processing approach that calculates waveforms in real-time based simply on parameters such as the sampling frequency, bandwidth, and time width. Additionally, this paper implements predistortion through the polynomial curve to approximate phase errors of the system. The parallelizing process in the FPGA is necessary to satisfy the high-speed requirement of a digital-to-analog converter (DAC); however, repeatedly multiplexing real-time calculation consumes extensive logic and DSP resources, potentially exceeding FPGA limitations. To address this, this paper proposes a piecewise linear algorithm to conserve resources, which processes the polynomial only once, acquires the difference in two adjacent values through the register and pipeline, and then adds this increment to facilitate parallel computations. The performance of this proposed generator is validated through simulation and implemented in experiments with an X-band airborne SAR system. [ABSTRACT FROM AUTHOR]

This paper, intends to survey major ship detection models and techniques based on conventional methods of modelling statistical data and also models based on deep Convolutional Neural Networks (CNNs) using satellite-borne Synthetic Aperture Radar (SAR) data. We aim to extract current research directions and limitations of existing models to gain insight understanding and suggestions from vast amount of research in ship detection using SAR. The literature review addresses key methods demonstrated by researchers for ship detections in SAR. Despite of rigorous research in this domain the application of organized knowledge is still being explored to demonstrate ship detection in SAR imagery field. Research papers and articles were gathered from standard publishers from last decade. The proceedings from significant publications in conference and transactions were included in this review. [ABSTRACT FROM AUTHOR]

Due to background clutter in synthetic aperture radar (SAR) images, the detection of dense ship targets suffers from a low detection rate, high false alarm rate, and high missed detection rate. To address this issue, an FSM-DFF-YOLOv5+Confluence algorithm is proposed in this paper for the detection of near-shore ship targets in SAR images with complex backgrounds. First, based on the YOLOv5 target detection algorithm, two improvements are made in the feature extraction network: feature refinement and multi-feature fusion; in the feature extraction network, deformable convolutional neural networks are adopted to change the position of the target sampling points of the convolution to improve the feature extraction capability of the target and the detection rate of ship targets in SAR images with a complex background; in the multi-feature fusion network structure, cascading and parallel pyramids are used in the multi-feature fusion network to realize feature fusion at different levels; the visual perceptual field of feature extraction is expanded by using null convolution to enhance the adaptability of the network to detect near-shore multi-scale ship targets with complex backgrounds and reduce the false alarm rate of ship target detection in SAR images with complex environments. In this way, the DFF-YOLOv5 near-shore ship target detection algorithm is established. Meanwhile, to address the problem of missed detection in near-shore dense ship target detection, this paper adds rectangular convolution kernels to the convolution of the feature extraction network to better realize the feature extraction of dense ship targets in SAR images with complex backgrounds. Besides, the Confluence algorithm instead of non-maximum suppression is used in the prediction stage. Through experiments on the constructed complex background near-shore ship detection dataset, it is indicated that the average accuracy of the FSM-DFF-YOLOv5+Confluence detection algorithm reaches 88.96%, and the recall rate reaches 88.80%. [ABSTRACT FROM AUTHOR]

Permafrost is a significant part of the cryosphere, which has gained increasing attention from scientists, policy-makers, and the general public due to global warming, environmental degradation, water shortages, and intense human activities. Although many permafrost research review articles have been published, these studies were predominantly limited to either one subject or one field, while systematic studies about permafrost based on bibliometric analysis methods remain limited. We aim to fill this gap by conducting a bibliometric analysis of 13,697 articles in the field of permafrost research from 1942 to 2021, collected from the Web of Science core collection database. The results indicate that permafrost research is a typically multi-author, multi-country, and multi-institution cooperative field, involved in many research fields. The cumulative number of publications has presented an exponential increase over the past 80 years, with an average annual growth rate of 10.40%. Since 2000, China has seen a rapid growth in the number of publications per year, surpassing the USA in 2016 and leading in the years since then. In addition, the authors from China have great contributions in publications, and there is good room for permafrost development in the future according to the authors' M-index ranking. After the analysis of authors' keywords, we found that, compared to the conventional methods, machine learning and interferometric synthetic aperture radar (InSAR) are new technological approaches introduced in recent years, and the Qinghai–Tibet Plateau has become a popular study area. The results presented here can help related researchers, scholars, and students in the field to better understand the past developments, current status, and future trends of permafrost research. Furthermore, this paper presents and expands the general process of the bibliometric method used in permafrost studies, which can provide researchers with new inspirations and improve discipline research approach. [ABSTRACT FROM AUTHOR]

Ground-penetrating radar (GPR) started as a radio echo sounding technology during the second half of the last century, but it is now a well-established and widely adopted technology for producing high-resolution images of subsurface. Novel processing schemes, including full waveform inversion and machine learning, advanced GPR transmission, and elastic wave methods, are among the research topics regarded as fundamental for the future. By taking into account the UWB nature of GPR methodology, as well as the experienced inefficiencies in traditional design solutions, this paper provides a robust ground for evaluating the optimal choice for GPR system design. [Extracted from the article]

Polarimetric calibration is one of the preprocessing steps in the quantitative processing of Polarimetric synthetic aperture radar (PolSAR) data, and its accuracy will affect subsequent applications. At present, the polarimetric calibration method based on distributed targets is widely used, and this kind of method needs to extract distributed targets that satisfy certain scattering characteristics as the calibration reference ground object samples before calibrating. Therefore, the extraction accuracy of distributed targets has a great influence on the accuracy of polarimetric calibration methods based on such targets. Therefore, this paper proposes a new distribution target extraction method, which is based on the idea of KS hypothesis testing, and uses the homogeneity of the pixels in the window to determine whether it is a distribution target. To verify the effectiveness of the method, the X-band airborne PolSAR images are used as the data of the polarimetric calibration experiment. Experiments show that, compared with other extraction methods, our method can not only ensure the extraction accuracy of distributed targets, but also further improve the accuracy of polarimetric calibration. [ABSTRACT FROM AUTHOR]

Image brightness compensation processing is one of the important aspects to decide whether the image can be further used for remote sensing quantitative applications. In this paper, a brightness compensation enhancement processing method based on nonsubsampled contourlet transform (NSCT) is used to address the widely used problems of synthetic aperture radar (SAR) images with unbalanced internal brightness and blurred detailed texture features and severe image SAR. Firstly, the image is decomposed using the NSCT transform and the sub-band coefficients are adjusted after calculating the improvement coefficients for the statistical radiation change curve of its low-frequency sub-bands to achieve brightness compensation; for each high-frequency sub-band image, a hard threshold function is used to enhance the contour texture information of the image and suppress noise; finally, all sub-bands are combined using NSCT inverse reconstruction to obtain the resultant image. Aiming at the problem of radiation discrepancies arising from SAR images due to its side-view observation method and antenna directional map, this method is more applicable to SAR images and has better improvement effects than the traditional image equalization algorithm, increasing the average gradient and structural similarity, better preserving the detail features, significantly improving the brightness non-uniformity problem, enhancing the visual effect and providing some support for the subsequent monitoring of various disasters. [ABSTRACT FROM AUTHOR]